[6pack] TR6 Dizzy - Part 2

[John Mitchell]

Mine didn't come with any instructions to check the gap either. I just 
positioned it as close as possible within the movement available and of 
course not touching.  John Mitchell  76 TR6
PS. I keep an extra unit in the boot just in case.  I can change the 
pertronix sensor much faster than reinstalling a distributor plate with 
points.

Joe Laurito wrote:
> Ummmm..no, there was nothing in the Pertronix instructions about making any
> adjustment. I loosened the nuts and tried to move the plate but there is no
> movement; might have to file the slotted hole for more clearance. Is that
> little piece of clear plastic the adjusting tool? 
>
>  
>
> Joe
>
>  
>
> From: shewfamily at aol.com [mailto:shewfamily at aol.com] 
> Sent: Monday, August 31, 2009 11:44 PM
> To: trglory at verizon.net; rmcbride at mi.rr.com; 6pack at autox.team.net
> Subject: Re: [6pack] TR6 Dizzy - Part 2
>
>  
>
> Just checking to make sure you set the air gap between the pickup and the
> ring that goes over the lobes.  You indicated that you installed it but you
> didn't mention setting that gap with the gap tool provided.  Just checking.
>
> John Shewmake
>
> '74 TR6 with Pertronics
>
> Birmingham, AL