[6pack] Clutch/Transmission issue

[Hunter, Darcy]

Thanks Kendall, I did go out to the garage last night and used a pry bar to
check the end float.  Did not use a mic but by feel, didn't detect anything
measureable so I'll put that in the column of reviewed but not probable.
Darcy

Subject: Re: [6pack] Clutch/transmission Issues
To: Darcy_Hunter at Instron.com, 6pack List <6pack at autox.team.net>
Message-ID: <82363.6514.qm at web82608.mail.mud.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

Hi Darcy,

The last time I had the symptoms that you describe... I had lost the thrust
washer at the rear main bearing. And the reason the clutch stopped working
properly is because the whole crankshaft had about a 1/4" of travel front to
back. I let it go too long before I discovered the root cause and ended up
with a messed up crank and block. Not cool. Hopefully not your problem, but
you should definitely check the end float before trying anything else.

Kendall

Camarillo, CA