[6pack] TR6 timing advance

[DLylis at aol.com]

In a message dated 5/14/2009 12:47:31 A.M. Eastern Daylight Time,  
tom628 at verizon.net writes:

David:  My thinking may be a little fuzzier than usual tonite, but could 
you  
possibly have set the static timing one plug wire out of phase by  accident?



No, Thanks for your response.  The setup for static is done without  regard 
to the plug wire to the cylinder.  It is set at TDC to insure that  zero 
degrees on the scale is in fact TDC compression, and then the crank is set  to 
the indicator for static timing and then the distributor is set to points  
just open. Plug wires are marked and checked and were determined to be  
correct before the dynamic timing check.
Thanks 
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Dell Mini Netbooks: Great deals starting at $299 after 
instant savings! 
(http://pr.atwola.com/promoclk/100126575x1222627952x1201458914/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B214819460%3B36680227%3Bi)