[6pack] Cold air intake

[Al Salvatore]

If you have triples,  I've seen where someone had take two air cleaners and 
sectioned them so they would fit the triple set-up.

Al

----- Original Message ----- 
From: "James Henningsen" <trguy at cfl.rr.com>
To: "'Dave from Calgary'" <YYCTR6 at shaw.ca>; <6pack at autox.team.net>
Sent: Wednesday, June 24, 2009 5:31 PM
Subject: Re: [6pack] Cold air intake


> Dave:
> Thanks for the idea and a great setup for the twin carb.  The source for 
> the
> duct flange is a big help.
> Jim Henningsen
>
> -----Original Message-----
> From: Dave from Calgary [mailto:YYCTR6 at shaw.ca]
> Sent: Tuesday, June 23, 2009 8:55 PM
> To: 'James Henningsen'; 6pack at autox.team.net
> Subject: RE: [6pack] Cold air intake
>
> To quote the PO of my car who did the very same thing:
>
> "The simple solution that I did was to buy the twin-snout air cleaner
> housing
> from an early ('69 - '70) TR6 and run 2 paper hoses (the ones that are 
> sold
> for
> carb preheat) to the rad shroud just above and to the left of the carbon
> canister. I bought a couple of aluminum duct flanges from
> http://www.aircraftspruce.com/catalog/appages/ductflanges.php and rivited
> them
> to the shroud where I slipped the hoses on. Seems to work great with the
> stock
> carb setup. "
>
> And here's the result: http://lbcs.ca/images/P1080787_1024x768.jpg
>
>
> -----Original Message-----
> From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] 
> On
> Behalf Of James Henningsen
> Sent: June-23-09 6:38 PM
> To: 6pack at autox.team.net
> Subject: [6pack] Cold air intake
>
> Anyone have a source for an inexpensive cold air intake setup for an
> aluminum shroud radiator duct.  I know Richard Good has a nice setup, but 
> I
> am looking for the economical "racer" look.  I am thinking of some sort of
> tubing connector mounted to the shroud that the flexible tubing could 
> clamp
> to and then have the tube end right in front of the front carb and have a
> clamp/adapter to secure.  Anyone have some pics and a parts source they 
> are
> willing to share.  Many thanks,
>
> Jim Henningsen
>
> 75 TR6 (triple ZS)
>
> Maitland, FL