[6pack] Transmission rebuild

[DLylis at aol.com]

IMO worn out synchro hubs is a last resort issue.  I think  if it had gone 
this far this tranny would be popping out of gear, etc.  It  is pretty easy to 
tell if that is the case.  If the synchros have  acceptable tolerances, and you 
can measure without disassembly (except for  the cover, of course), they 
should be doing their job. If new synchros were  put in and they are of 
questionable quality, the worn bronze should show up  in the oil since it is not 
filtered.  (OD, no OD?).  Darcy got these  from BPNW and I find them to be very good.
 
Again, I would make absolutely certain that the clutch is not a contributor  
before going to a next step, which may include repalcing the tranny with a 
known  good one.  (If no OD, of course)  
 
Just my two Euros worth
 
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Nothing says I love you like flowers! Find a florist near you 
now. (http://yellowpages.aol.com/search?query=florist&ncid=emlcntusyelp00000001)