[6pack] [TR] installing rubber suspension bushings

[Mark J Bradakis]

I've often used a length of threaded rod and stacks of large washers
to pull bushings into place as the nuts are tightened.  You don't have
to use a rod that goes all the way through both bushings, a bolt of
the appropriate length can work on one at a time.

Lubrication helps a lot.  I've used WD-40, white lithium grease,
emulsified hand cleaner ( not the kind with pumice or other grit! )
and Girling rubber grease at one time or another.

mjb.