[6pack] TR6 Dizzy - Part 2

[shewfamily at aol.com]

Just checking to make sure you set the air gap between the pickup and the ring that goes over the lobes.? You indicated that you installed it but you didn't mention setting that gap with the gap tool provided.? Just checking.

John Shewmake

'74 TR6 with Pertronics

Birmingham, AL


-----Original Message-----
From: Joe Laurito <trglory at verizon.net>
To: 'Robert McBride' <rmcbride at mi.rr.com>; '6Pack List' <6pack at autox.team.net>
Sent: Mon, Aug 31, 2009 9:18 pm
Subject: Re: [6pack] TR6 Dizzy - Part 2




Robert;

That sounds like it has possibilities, I'll try it tomorrow. Move the wires
clockwise and turn the distributor counter-clockwise?

Joe

-----Original Message-----
From: Robert McBride [mailto:rmcbride at mi.rr.com] 
Sent: Monday, August 31, 2009 9:24 PM
To: Joe Laurito; 6Pack List
Subject: Re: [6pack] TR6 Dizzy - Part 2

I would move all the plug wires one hole on the cap and try again to set the
timing..
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as shewfamily at aol.com