[6pack] Installing rubber window seal, etc.

[Bob Danielson]

Pete,
You might want to drop in on The 6-Pack Forum (http://tinyurl.com/chvl55) as
the window seal is currently being discussed. As for the Velcro trick, you
may have seen it on my site http://tr6.danielsonfamily.org/WindowChannel.htm


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Pete Kronberg
Sent: Tuesday, April 28, 2009 2:23 PM
To: 6pack at autox.team.net
Subject: [6pack] Installing rubber window seal, etc.

Folks,
 
I seem to recall that there's a special tool for either the
removal/replacement of the rubber window seal...or is it for the interior
door panel clips?
 
Also, while I'm fooling w/ my door panel (which needs some stitching in the
pocket) and replacing my rubber window seals...I'm thinking about doing the
retrofit for the glass sleeves. Someone on the list had a slick method,
using lengths of <the wooly half> Velcro tape...
 
Any info would be appreciated.
 
Regards,
 
Pete
Mallard Green '75
Denver, CO
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as 75tr6 at tr6.danielsonfamily.org