[6pack] Richard Good hubs

[Andrew Packard]

Bob:
I understood his CVJ's to require some enlarging of the hole in the
trailing arm.  After reading your website, I'm going to go with the
CVJ's.  Thanks for documenting all that work!
Andy 
________________________________
From: Bob Danielson
<75TR6 at tr6.danielsonfamily.org>
To: Andrew Packard <apackard68 at att.net>;
6pack at autox.team.net
Sent: Friday, April 24, 2009 5:07:49 AM
Subject: RE:
[6pack] Richard Good hubs

Andy,
There's a few guys in the 6-Pack Forum that
have either his upgraded hubs or
his new CVJs that use that hub. I've got his
CVJs and the installation was a
perfect fit. You can see it here
http://tr6.danielsonfamily.org/CVJ.htm 


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From:
6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf
Of Andrew Packard
Sent: Friday, April 24, 2009 2:14 AM
To:
6pack at autox.team.net
Subject: [6pack] Richard Good hubs

Anyone out there
having good experience with Richard Good's rear hubs?  I
was thinking of
upgrading to the hub unit only that then attaches to the
stock splined insert
via the u-joint.
Andy
CD6746L
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You
are subscribed as 75tr6 at tr6.danielsonfamily.org