[6pack] Gas Tank Sending Unit Float

[Bob Danielson]

Another option is to go to a brass Mustang float. You can see what it looks
like here http://tr6.danielsonfamily.org/ForumImages/Float2.jpg and here
http://tr6.danielsonfamily.org/ForumImages/Float1.jpg

It's a perfect fit and was used on any Mustang from '65-'73. I got mine from
MustangsUnlimited.com and it's part #240075

Bob


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Corbitt, Michael
Sent: Saturday, April 18, 2009 1:49 PM
To: 6pack at autox.team.net
Subject: [6pack] Gas Tank Sending Unit Float

With my interior out for a makeover, I decided to clean and reseal the gas
tank with Eastwood's kit.  When I pulled the tank sending unit, I noticed
the float is close to 1/3 full with gas.  I can't seem to find where it's
leaking in as the gas doesn't want to come back out.  The gas gauge always
seemed to be working okay.  Should I replace this, and if so, can the float
be purchased separately (I notice TRF only sells it as part of the sending
unit)?



Mike
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as 75tr6 at tr6.danielsonfamily.org