[6pack] TR6 - Frozen rear brakes

[Foster, Stan (HP IT)]

I think the big difference is the handbrake mechanism seizing up with the
brake applied. That is another level of stick compared to a clutch plate.

Stan

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Navarrette, Vance
Sent: Tuesday, April 14, 2009 4:47 PM
To: Robert McBride; 6pack at autox.team.net
Subject: Re: [6pack] TR6 - Frozen rear brakes

	Robert:

	So I gotta ask; What makes this problem so difficult compared to a stuck
clutch? Perhaps the eBrake cables rust, so that the shoes will not release?
The clutch (I would think) has all the same potential hydraulic issues -
rusty
slave cylinder, fluid turning into pudding, friction material sticking to
iron, blah, blah, blah.
	Yet the brake problem will seemingly not respond to a couple of nudges to
free the shoes (based on the personal stories shared with the list).
Inquiring
minds want to know what makes the brakes so much harder than the clutch?

	Vance


    Vance Navarrette
    Cogito Ergo Zoom
    I think, therefore I go fast