[6pack] #4 main bearing cap needed

[Kevin McNelis]

Sounds like a long-neglected thrust washer to me.  Ask me how I know...  But
I fixed mine.  Pinned (riveted) a new thrust washer into the "divot" made by
the crank in the bearing cap, machined it down, and used another new thrust
washer where it should be.  20,000 miles and so far, so good....

Kevin


L. Kevin McNelis, PhD, CPA

New Mexico State University
505-646-2485

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Wayne Lee
Sent: Monday, November 17, 2008 4:21 PM
To: 6pack at autox.team.net
Subject: Re: [6pack] #4 main bearing cap needed

It doesn't matter what # it is. Line Boring is in order now.
What happened? Lost it? Costly loss or whatever?
Regards,
Wayne Lee
www.motorcarriage.com

----- Original Message -----
From: <LOddTR at aol.com>
To: <6pack at autox.team.net>
Sent: Monday, November 17, 2008 6:00 PM
Subject: [6pack] #4 main bearing cap needed


>I am in need of a good used #4 main bearing cap for a late TR6. Please
> contact me off-list if you have one available.
>
> Leo Oddi
> **************Get the Moviefone Toolbar. Showtimes, theaters, movie news &
>
more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redi
r=htt
> p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as wayne at motorcarriage.com
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as kmcnelis at nmsu.edu