[6pack] TR6 Cam Bearings: bore size?

[Robert Lang]

On Tue, 13 May 2008 triumph at 2simpleusa.com wrote:

> My block is going in to be prepared for insertion of Spit. cam bearings 
> ... does anyone have the definitive bore size for fitting the Spitfire 
> cam bearings in te TR6 block?

If you provide the bearings with the block, any competent machinist will 
figure out what to do. Otherwise, if you tell them that the bearings are 
from a Spitfire, they can look up the OD for the align bore.

Don't forget to provide your cam so they can dimension the journals for 
proper clearance. Otherwise, they might go in too tight and you'll have 
problems.

I recall that aptfast.com had the dimensions, but I'm having trouble 
accessing that site right now... but check them out.

> Thanks,
> **************
> Tony Gordon
> 72 TR6
> **************

rml
---------------------------------------------------------------------------
Bob Lang              NER/SCCA                 |  This space for rent
Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
---------------------------------------------------------------------------