[6pack] TR6 Cam Bearings: bore size?

[Terry Geiger]

Here is what TRF sent me when I did mine:
Use cam bearings for a 1296 cc spitfire engine.  You use the small journal 
bearings (width).  The wide bearings go in the outside bearings and the 
narrow bearings go in the center.  The bores must be bored to 1.9680 - 
1.9695 to fit the bearings.

Terry Geiger
195? MGA~1974 Triumph TR6~1970 MGBGT~1963 Triumph Herald~1984 Mercedes 300D
www.ShoalsBritishCars.org

----- Original Message ----- 
From: <triumph at 2simpleusa.com>
To: "6-Pack" <6pack at autox.team.net>; <triumphs at autox.team.net>
Sent: Tuesday, May 13, 2008 2:08 PM
Subject: [6pack] TR6 Cam Bearings: bore size?


> My block is going in to be prepared for insertion of Spit. cam bearings 
> ... does anyone have the definitive bore size for fitting the Spitfire cam 
> bearings in te TR6 block?
>
> Thanks,
> **************
> Tony Gordon
> 72 TR6