[6pack] 02 sensor locations

[Calvin Allen]

 Hi Kendall

It is a very good time to get a photos to you as I have the motor out right
now.  I built a higher compression motor this winter and it is going in this
weekend.  I will get you some photos of the conversion parts including the
o2 sensors.  

Calvin


-----Original Message-----
From: Kendall Larsen [mailto:mailkendall at sbcglobal.net] 
Sent: Friday, March 28, 2008 3:41 PM
To: Calvin Allen
Subject: Re: [6pack] 02 sensor locations

Hi Calvin,

Interesting! Do you have any pictures?

Kendall

----- Original Message ----
From: Calvin Allen <callen at molycop.ca>
To: Triumph 6 Pack <6pack at autox.team.net>
Sent: Friday, March 28, 2008 3:31:26 PM
Subject: Re: [6pack] 02 sensor locations

I have a TR6 with a standard exhaust manifold.  I drilled two holes in the
manifold(One in Each Bank) to mount O2 sensors.  I have run the car for 1
year without any concerns.  I thought the manifold might crack, however no
problems or leaks.  I have the TBI conversion running with a megasquirt ecm.

73TR6
Calvin 

Subject: [6pack] 02 sensor locations

Where is the best place to locate sensors...  Nelson Reidell suggests in the
middle of the down pipes.  I have the 76 double pipe system, so I guess I
need two sensors and a switch to get readings off both carbs.  Any
suggestions or advice?