[6pack] Moto Lita Hub install....

[forzion at maine.rr.com]

Hey thanks, Bob! I'll give that a try. I assume there's enough upper column length to allow for that change of position....

Dave

---- Robert Lang <lang at isis.mit.edu> wrote: 
> Hi,
> 
> The "gap" can be filled in a couple of ways. The easiest is to loosen the 
> sterring column clamps under the dash and slide the column towards the 
> mouting hub for the wheel.
> 
> It's pretty straight-forward.
> 
> I had the same problem with the Grant wheel I use on both cars as that 
> need an adapter too.
> 
> regards,
> rml
> ---------------------------------------------------------------------------
> Bob Lang              NER/SCCA                 |  This space for rent
> Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
> Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
> ---------------------------------------------------------------------------