[6pack] More cam timing

[Robert Lang]

Hi,

You'll probably get several responses to your query, but the bottom line 
is that you are "right in the ballpark" given the timing gear and cam 
grind. I'd just go with it.

If you want to verify your timing numbers, pick up the I/E for cylinder #6 
and see if the numbers are the same. If they are the same, you can't do 
much about it as the cam grind and the gears that you have in hand.

If you had a vernier cam (not worth the extra money for your cam given the 
data points provided, IMHO) you could probably dial in intake or exhaust 
to spec, but it looks like the cam grind is a tad off and that happens 
sometimes.

Regards,
rml
---------------------------------------------------------------------------
Bob Lang              NER/SCCA                 |  This space for rent
Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
---------------------------------------------------------------------------