[6pack] Lobotomizing the steering lock on later model TR6's

[Pimento73 at aol.com]

In a message dated 3/1/2008 9:04:29 P.M. Eastern Standard Time,  
stan.foster at hp.com writes:

I have  always found the steering lock somewhat pointless and irritating
especially  when I need to do something that needs the wheels turned in a
particular  way and I have to go back in the house to get a key etc.

I was  wondering if there was a clean way to remove the column lock pin or if
the  best route is to just cut it off ?






If you take the inner steering column out, its easier to take the locking  
thing of the column - just grind the weld at each end, then pry apart in the  
middle and it comes right off - of course you have to be careful to grind the  
weld and not the column - pretty easy on a lathe, might be harder by hand
 
Cheers,
Jack Mc



**************Ideas to please picky eaters. Watch video on AOL Living.      
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy/
2050827?NCID=aolcmp00300000002598)