[6pack] Corrosion in cylinder bores

[Ed Bratt]

John:

Been there, done that.   I suggest an engine cylinder hone with a fine 
deglazing stone.  If your hone will accept a socket and speeder handle, the 
hone can be turned by hand, giving you a clear view of the hone's progress 
so you will not over do it and enlarge your bores.

Ed Bratt
Regina, Saskatchewan
1976 Tr6
----- Original Message ----- 
From: "John North" <johncnorth at gmail.com>
To: "Triumph 6 Pack" <6pack at autox.team.net>
Sent: Tuesday, January 29, 2008 9:04 PM
Subject: [6pack] Corrosion in cylinder bores