[6pack] TR250 right hand mirror

Foster, Stan stan.foster at hp.com
Wed Jan 23 14:34:17 MST 2008


Exactly. Some of us have bullets with 4 inch diameter mirrors and so far
nobody has volunteered a source for a 4 inch convex mirror and the
conversation has moved to how to create one from a larger convex mirror.

One thought, how well would a suitably equipped dremel do against an off the
shelf convex mirror ?. The dremel takes some very thin cutting disks and
rotates at very high speed so I wonder even if you couldn't cut out a circle
you could cut several straight lines to reduce the amount of material and then
use a grinder to generate the finished diameter.

Stan

-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com at autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com at autox.team.net] On Behalf Of
forzion at maine.rr.com
Sent: Wednesday, January 23, 2008 4:06 PM
To: Timbo00001 at aol.com
Cc: lindquistse at gmail.com; 6pack at autox.team.net
Subject: Re: [6pack] TR250 right hand mirror

All I've seen out there that's ready-to-go is 3-3/4" diameter....

http://snipurl.com/1y3b3


Dave
'74-Six

----- Original Message -----
From: Timbo00001 at aol.com
Date: Wednesday, January 23, 2008 3:58 pm
Subject: Re: [6pack] TR250 right hand mirror
To: lindquistse at gmail.com, 6pack at autox.team.net

> Why not just buy the convex mirrors sold in auto parts stores for
> about  $2?
> That's what I did and it was self-adhesive, so I just stuck it
> onto  the
> bullet mirror glass and it was just about a perfect fit.
>
>
> In a message dated 1/23/2008 1:44:41 P.M. Eastern Standard Time,
> lindquistse at gmail.com writes:
>
> I am in  the process of trying to convert a Ford Explorer
> passenger mirror
> into a  RHS convex mirror for my TR250.  The TR250 has a
> trapezoidal  shaped
> mirror.  Any thoughts as to the chances of getting this cut vs  a
> circularconvex mirror?   Better or worse than curtting a 5"
> circle into 4" circle?
> I am obviously  soliciting opinion here, but I  was hoping that
> the flatter
> straigbnt edges might give me a better shot at  it.  Timely note
> on this
> list, I might add.  I was going to try  the local specialty glass
> shop.
> Steve
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You  are subscribed as  timbo00001 at aol.com


More information about the 6pack mailing list