[6pack] Trailing Arm Bushings

[Foster, Stan]

Bob, very nice job, did you use Richards adjustable brackets also ?.

For those that cant be bothered fabricating something or (eek!) resorting to
trying to burn out the rubber bushes, one trick I learned from Vance "the
toolman" Navarrette is to use an off the shelf two pronged puller in "push"
mode as shown in this picture. They pop right out.

http://i38.photobucket.com/albums/e119/foster461/TR6/DSCN1652.jpg

Stan


-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com at autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com at autox.team.net] On Behalf Of Bob
Danielson
Sent: Tuesday, January 15, 2008 10:51 PM
To: 'Triumphs'; '6pack'
Cc: acekraut11 at aol.com; 'Rick Patton'; 'Richard Good'
Subject: [6pack] Trailing Arm Bushings

One of my winter projects includes the Goodparts' differential upgrade and
Richard Good recommends installing Nylatron bushings in the trailing arms.
Seeing as my bushings were over 10 years old, this was a good time to replace
the bushings with his product...........but first I had to remove the old
rubber bushings. I've read about how difficult and how easy it can be, so
here's how I did it....and it was very easy
http://tr6.danielsonfamily.org/TrailingArmBushings.htm

Bob

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org