[6pack] Source for PVC sleeve ?

[John VanNorman]

Stan,

Try some black heat shrink wrap - you know the stuff you use in place of
electrical tape - except don't shrink it with heat.   I used that on the
metal tabs in my engine bay.  Probably not cost effective if you have to
replace a ton, but if you have a few places here and there, it works,
especially if you were like me and already had some of it.

John V.
1974 1/2 TR6

Throughout the TR6 there are various times where black PVC like sleeve
material is used to buffer the wiring. We see it for the wires coming
through
the inner wing for the headlamps and we see it covering the metal tabs all
over the engine bay that secure the loom. Do we have a source for that black
PVC sleeve or any suggestions for a viable alternative ?

Stan


-- 
www.vannorman.no-ip.org