[6pack] Engine Stand Help

[Ed Bratt]

Bob:

I have been building a Seven replica (for a few years), and another Seven 
builder has a good photo of his Rover V8 hung on his engine stand.

 http://duncan-hurst.se7ens.net/photo.htm

Those outside bolt holes are the handiest to use.   The important part is 
that you mount it so you can rotate the crank and attached internals, using 
spacers if necessary so the crank is free to rotate.

Ed Bratt
Regina, Saskatchewan
1976 TR6

----- Original Message ----- 
From: "Bob Danielson" <75TR6 at tr6.danielsonfamily.org>
To: "'list Triumph'" <triumphs at autox.team.net>; <6pack at autox.team.net>
Sent: Wednesday, February 27, 2008 1:36 PM
Subject: [6pack] Engine Stand Help