[6pack] TR6 Crankshaft Question

[Bob Danielson]

John,
It's interesting because VB, TRF and Moss all have different Pilot Bushings
for early vs late TR6s. Moss Part # 330-370 says (in crankshaft) for TR250
and '69 TR6's while part # 330-500 says (in flywheel) for '70-'76 TR6s.  


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org 


-----Original Message-----
From: 6pack-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:6pack-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of acs25m at swbell.net
Sent: Monday, February 25, 2008 1:18 PM
To: 6pack at autox.team.net
Subject: Re: [6pack] TR6 Crankshaft Question

Bob,
  I just finished putting my trans and engine back into the car two weeks
ago. I have a TR250 and the bushing you are talking about is supposed to be
in the end of the crankshaft according to the book. Mine however wasn't in
the end of the crank but in the back of the flywheel and against the flat
end of the crankshaft. I can only assume that someone has altered the parts
in my engine with parts from later years. You may have the same problem.
Good luck!
  John Maneke
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as 75tr6 at tr6.danielsonfamily.org

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.516 / Virus Database: 269.21.0/1296 - Release Date: 2/24/2008
12:19 PM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.516 / Virus Database: 269.21.0/1296 - Release Date: 2/24/2008
12:19 PM