[6pack] Door Handle and Window Winder SPRING

[lfm614 at aol.com]

Bob,

They go behind the door panel.  Purpose is to keep the black escutcheons against the handles.  They are a PITA as well to keep back there while you are trying to line up thew clips. Make sure that you tape some plastic across the door under the panel as a water barrier before you put them on. 

Lou
------Original Message------
From: robert fabie
Sender: 6pack-bounces+lfm614=aol.com at autox.team.net
To: TR-6 list
Sent: Feb 10, 2008 11:11 AM
Subject: [6pack] Door Handle and Window Winder SPRING

On a TR6, does the large spring go behind the black plastic escutcheon or
behind the door panel? Should be self evident, but I just dont' remember
where it was when I pulled the handles and panel off.

Oh, and by the way, lining up those new clips on the new panels so they
conform to the holes in the door is a real PITA!

Thanks.
Bob
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as lfm614 at aol.com