[6pack] Door Handle and Window Winder SPRING

[Bob Danielson]

Bob,
I could never get the springs back in and preserve my sanity......... Plus I
could never figure out what the did........and 10 years later I still know
their purpose. There's some pictures at the bottom of this page
(http://tr6.danielsonfamily.org/WindowChannel.htm) showing how to get the
pin back in. It's very easy to do without the springs.


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org 


-----Original Message-----
From: 6pack-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:6pack-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of robert fabie
Sent: Sunday, February 10, 2008 12:11 PM
To: 6pack at autox.team.net
Subject: [6pack] Door Handle and Window Winder SPRING

On a TR6, does the large spring go behind the black plastic escutcheon or
behind the door panel? Should be self evident, but I just dont' remember
where it was when I pulled the handles and panel off.

Oh, and by the way, lining up those new clips on the new panels so they
conform to the holes in the door is a real PITA!

Thanks.
Bob
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as 75tr6 at tr6.danielsonfamily.org

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.516 / Virus Database: 269.20.0/1268 - Release Date: 2/9/2008
11:54 AM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.516 / Virus Database: 269.20.0/1268 - Release Date: 2/9/2008
11:54 AM