[6pack] Miata seat bracket

[Dale]

Joe
When I was installing my Miata seats I was at the same place as you.
 My
solution was to take a 1/4" x 2" flat bar weld a 5/8" or 3/4" nut to the bar
and that add a washer to the top and bottom of the stock Miata bracket which
was bent according to Nelson's instrucrtions. After all the measurements were
taken the bars were bolted to the stock holes and the seats to nuts. This gave
just enough clearance for the seats to slide with out any modification to
them.
Sorry I don't have pictures. I am 6' 1"and have no problem seeing and
have a Roll Bar that limits about 1.5" of further back travel.
Dale



-----
Original Message ----
From: "Lizirbydavis at cs.com" <Lizirbydavis at cs.com>
To:
Henri Lefebvre <75teer6 at gmail.com>; 6pack at autox.team.net
Sent: Thursday, April
24, 2008 5:14:31 PM
Subject: Re: [6pack] Miata seat bracket

I'm very tempted
to cut about 2" off the bottom of the seat pan and welding in a new bottom. 
It seems to me that this might be a good solution if I can keep from
compromising the integrity of the seat by damaging the foam  
Joe 
Henri
Lefebvre" <75teer6 at gmail.com> wrote:

>Joe,
>
>One of the limiting factor to
minimum seat height is the low bulge in
>the seat pan.
>I was looking at the
seat bottom last night and measuring with the TR6
>track. My initial plan is
to see if I can mount a flat bracket to the
>Miata pan, front to back, on
either side, using the mounting holes in
>the pan. The bracket would have a
'tab' bent at 90 degrees to bolt to
>the TR6 tracks, at the same place as the
TR6 seats.
>It seems that this approach would be the lowest possible seat
placement.
>
>More measuring and tinkering to come.
>
>Henri
>
>
>
>On Wed,
Apr 23, 2008 at 6:57 PM,  <Lizirbydavis at cs.com> wrote:
>> Has anyone figured
out how to mount the Miata seats so that they are the
>> same height as the TR
seats?  I've got a pair, but haven't installed because
>> initial fitting
showed that I would be looikng at the windshield header
>> instead of through
the windshield.  I'm 6'2" and need all the head room I
>> can get!
>> Joe
>_______________________________________________
>
>Support Team.Net 
http://www.team.net/donate.html
>
>6pack at autox.team.net
>http://autox.team.net/mailman/listinfo/6pack
>
>http://www.team.net/archive
>
>You are subscribed as lizirbydavis at cs.com
_______________________________________________

Support Team.Net 
http://www.team.net/donate.html

6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You
are subscribed as tpdwinch at yahoo.com
_____________________________________________________________________________
_______
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.
Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ