[6pack] Miata seat bracket

[Henri Lefebvre]

Joe,

One of the limiting factor to minimum seat height is the low bulge in
the seat pan.
I was looking at the seat bottom last night and measuring with the TR6
track. My initial plan is to see if I can mount a flat bracket to the
Miata pan, front to back, on either side, using the mounting holes in
the pan. The bracket would have a 'tab' bent at 90 degrees to bolt to
the TR6 tracks, at the same place as the TR6 seats.
It seems that this approach would be the lowest possible seat placement.

More measuring and tinkering to come.

Henri



On Wed, Apr 23, 2008 at 6:57 PM,  <Lizirbydavis at cs.com> wrote:
> Has anyone figured out how to mount the Miata seats so that they are the
> same height as the TR seats?  I've got a pair, but haven't installed because
> initial fitting showed that I would be looikng at the windshield header
> instead of through the windshield.  I'm 6'2" and need all the head room I
> can get!
> Joe