[6pack] Miata seat bracket

[N197TR4 at cs.com]

If someone would draw up the plates needed, including the holes, they could be done on production equipment in stainless steel.

If someone is interested in pursuing this, contact me. I've seen a couple of conversions. Very nice and worthwhile....anyone do this conversion for the TR4

Joe A.



>I made my own using the same design as Mark P which comes from the How to
>improve your TR6 book by Roger Williams. Just simple steel plate and angle
>iron, a local fabricator should  be able to make them in under an hour. The
>one change I made was to lower the front brackets to be the same height as the
>rear. I didnt like the feel of the seat under my legs with the original
>dimensions but that may be just a personal thing.
>
>
>http://s38.photobucket.com/albums/e119/foster461/TR6/Miata%20Seat%20Conversio
>n/
>
>Stan
>
>-----Original Message-----
>From: 6pack-bounces+stan.foster=hp.com at autox.team.net
>[mailto:6pack-bounces+stan.foster=hp.com at autox.team.net] On Behalf Of Corbitt,
>Michael
>Sent: Monday, April 21, 2008 3:53 PM
>To: im_sloane at hotmail.com; 6pack at autox.team.net
>Subject: Re: [6pack] Miata seat bracket
>
>Sloane,
>
>When I did the research on mine, there was a place in the UK that
>advertised these.  This was the link I used, but now it seems to be
>under construction.
>
>http://www.rmrengineering.co.uk/ <http://www.rmrengineering.co.uk/>
>
>I ended up having mine made by a local fabricator and was quite pleased
>with the result.  If I recall, I got the specs from Mark Pruitt's web
>site.
>
>www.marks-tr6-garage.com <http://www.marks-tr6-garage.com>
>
>Mike
>Corvallis, OR
>6pack at autox.team.net
>http://autox.team.net/mailman/listinfo/6pack
>
>http://www.team.net/archive
>
>You are subscribed as stan.foster at hp.com
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>6pack at autox.team.net
>http://autox.team.net/mailman/listinfo/6pack
>
>http://www.team.net/archive
>
>You are subscribed as n197tr4 at cs.com