[6pack] Engine Build

[Chuck Arnold]

Make sure you have the distributor pedestal.  MAchine and/or press in a
brass bushing at the bottom -- maintain the .005 or so clearance indicated
in the m anuals between this bushing and the oil pump gear.  I did not do
this and ended up ruining the gear with the rubbing between the bottom of
the pedestal and the gear.

On Tue, Apr 1, 2008 at 8:41 AM, Raymond Hatfield <iron_horse819 at yahoo.com>
wrote:

> Hi Everyone,
>
> I'm in the planning stages of my engine build and have a few questions.
>  first
> of all, here's what I intend to do so far:
>
>


-- 
Chuck Arnold