From shop-talk-bounces@autox.team.net Mon Nov 2 12:59:16 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 967C3A0AA0 for ; Mon, 2 Nov 2026 12:59:16 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from hognose1.porkbun.com (unknown [35.82.102.206]) by autox.team.net (Postfix) with ESMTP id 85031A0A65 for ; Mon, 2 Nov 2026 12:50:48 -0700 (MST) Received: from smtpclient.apple (unknown [68.239.50.138]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) (Authenticated sender: jamesf@groupwbench.org) by hognose1.porkbun.com (Postfix) with ESMTPSA id 9043F421D48; Mon, 2 Nov 2026 19:50:14 +0000 (UTC) s=default; t=1793649014; bh=tCNACtjMHhLM29/roGDhvQG0cqxlDzCudHMzOLryyww=; h=Subject:From:In-Reply-To:Date:Cc:References:To; b=fgjmV5AT+HtEFG6GOQjrHCuANvSwNUL7JzjB/ldhw4dj2fyvIQ2J68JjcH6JNvyKk h0PRA0uRGvFRPAsVLH05Jp2Pu7shd1lO3DuwgX61Z/PVn/pyhl4D2frdkGqHXjXJHl xjqVEM7AgALrxT4eVUh+QRpCa6XFtv7P2l9XMK8o= From: Jim Franklin Date: Mon, 2 Nov 2026 14:50:00 -0500 References: <7a04d017-6116-4455-93d4-d32007037e1d@threeboysfarm.com> To: markmiller@threeboysfarm.com Subject: Re: [Shop-talk] Cutting a chain link fence post? (Jim Franklin) Cc: shop-talk@autox.team.net Content-Transfer-Encoding: 7bit Errors-To: shop-talk-bounces@autox.team.net > On Oct 29, 2026, at 8:54 PM, Mark Miller wrote: > > A few thoughts: > > You could cut them with a sawzall This ended up working much better than I was anticipating. No problems sucking stuff into the motor. Now I need to pull out the ones that need the concrete removed so some kid doesn't ruin their rototiller in 10 years. I've been looking for a metal head that accepts 3 2x4s for a tripod but can't find any. Is it not a thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod head would be as well. A friend has a chan fall I can borrow. jim _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive From shop-talk-bounces@autox.team.net Mon Nov 2 19:53:41 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 62BD0A0B00 for ; Mon, 2 Nov 2026 19:53:36 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from mail-ed1-f52.google.com (unknown [209.85.208.52]) by autox.team.net (Postfix) with ESMTP id 79E15A01B0 for ; Mon, 2 Nov 2026 18:21:16 -0700 (MST) Received: by mail-ed1-f52.google.com with SMTP id 4fb4d7f45d1cf-6b4f7d3cd98so2741764a12.0 for ; Mon, 02 Nov 2026 17:20:43 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1793668842; cv=none; d=google.com; s=arc-20260327; b=MwRN4SYo+5VMAZVyj4DOfCR8I95D6Tt8NioZvcHuoT1mVvm7lUGlimPlw9kC86RvdK jFn0TJPTlON3BkVRGx4TQVd1Wo6MNiNfH9qomUiVXBA9ACfGKgib+QVmrhRzaV8Q2SOE TmMj5z+IIa+m3nVSYGVvXGH1sVrLKB5lXLvJoJIlWduktwd5pTU4i8WiOBGeOwuQiHgq Z4NS3o2v8/mQ5exi7kBebj6LagKQi94o5HJHo/hr4+QsVvExzoleSaznflM2ugsRysnS 0QzcpaqkaVaMG23QewWHPWh0y50ppUSn1PYELKjQy3GQfdReLh423sw6QA0nh6iTVerc NGnQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20260327; h=cc:to:subject:message-id:date:from:in-reply-to:references bh=Z6RBIB2Z91vS4MGsE96ridTCGESHKJNdabpSCFFf724=; fh=qENOkAE5ASMXmhRjvvZH1xJLf7T+pSMair+xYsTh1ls=; b=HUqPu+4CXxuRS/acnnPNAuDlr1ABIuKfODzpdR6CAkoY54pkl63IJsOsRRaKTzwX4S jescVD6dDx+Bv31mcsw4Uk0XHfjIen3RKc5STqpKgVHhu46ZZlAUTa2j4XFH0R22eZrR bJ9u2pWA161R9eBgeEPu46htolSwajSKX3O/y4zfryd6yDfNXE/PSx02EXNAmbdBLfT0 gKNRQw6Ui9D/2vE0ek5IHNrT8IOxrcyjg1YTT1j/H6JShKTXm57geOFsKQPhB5CE1T0z RAqTkq8xfnxQJ4X9NI1QtqpmTszhuAKrmdYi6orm20xitkNNGhMkb9HTJm8+wL9bzl6C G7CQ==; darn=autox.team.net ARC-Authentication-Results: i=1; mx.google.com; arc=none d=gmail.com; s=20260707; t=1793668842; x=1794273642; darn=autox.team.net; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:from:to:cc:subject:date:message-id:reply-to :content-type; bh=Z6RBIB2Z91vS4MGsE96ridTCGESHKJNdabpSCFFf724=; b=DvJ2HWcUd1mp4M9vOxB+FkJdQGgJ5YaruJK/JHgMs40BQuPYG8zu/FT7ZtPFyesb/d U2ubTMLgwQ6ihuPtj2sZUWopaz4RAd3VIaNSOKod6wV9nV7lxr+tVkeqxQCo7j8i9/z4 kL2B3/LGK4qQsKLEDtvRBjJ6DLRQHFl9RMLqGBRe7r+yw9jGjMDoc1KvCfTWbsVPFYnd BVUnORujWNDDbcGK5ylzQn+rI1Rx9IFy2Qdlo3hAVGgNRKPhsbKMMwOXwBrGMA2DfAus W2GrqO/Fl+yzt2djGAdcCU3buDqH+pOnbxS0byRfxicCPs5nJXO7XVIOd/o1h8bSEHcJ tCTw== d=1e100.net; s=20260707; t=1793668842; x=1794273642; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to:content-type; bh=Z6RBIB2Z91vS4MGsE96ridTCGESHKJNdabpSCFFf724=; b=Yr7DEfeMtxB1uitokoss8qpdwTJZMU0ElYS4XYlb/6KSLcDDfm98R3L6587y+Dn79S I14OcPyuoSd8eMOCd6NfZXu2fmPgL1GrUdLUlHVKeCj2Hm79+A929RX4DT2degCCvyT7 Hcxn3LlDT9rn9hjIcrA3omO9J3Zoc3g/VwcjY1aOD+XDIOEkYJK5hY3uqQe21I7gheOk YoGqFABlZZ6Ufa0KdF5lRXuveHaCdVcwothWC+mlXs4YbnrHfWhvOJ1w5HJPeANvH5Y9 II5ddQWHdjSf67cyVMUND0lstSc3Q54VO0IP34uhz/GmLKpl7rCediyMPw3aGUFUHdAZ Qg/g== TAsO/j2+jyuPyosd7BJVXWtnpxuyZL0TZQZhijQ+8dFZ4QCLvOFH7T+3cxmIWlTRqVQcbtKmiWh FE/8xJzH47CwJ9srMAGgKF60SE6vueUQ= BWjFzGHlCCHT2XGW3IfimuZhJWG30yqvhushDyZRcg5SOAIFsFt09WDpPdU1A2SVsB0RUFclOf0 2JejSHbyBeFtAqd04aH0zJSOG+/98XcqKHlq8DmV4V4aJ96U+PV+UxhV/9V9lhHF3hc387OupXi rbuQLAtPGN9p/XIEzkW8269/C5jB2TFihm3fjWj4oh+ttut6Dgu47LSOuO2v4I821CNZBKe8Oox zCikW0jUSv9KCZ6ieaTbcXR1F1OY/XmEEjLBO0oItxMmFCdS2vSMGwxKO0kJQ98QS0CC5c2BQyt 4TLY0wYEfdbQ0Wssoi/8/FCBTCdYE2Bk8w/i6Mv9s6OABcknVS6n3a7vOUw== 4fb4d7f45d1cf-6b4d4686cc2mr6372167a12.15.1793668841972; Mon, 02 Nov 2026 17:20:41 -0800 (PST) References: <7a04d017-6116-4455-93d4-d32007037e1d@threeboysfarm.com> <35821233-CE60-4C23-A0BE-D095EBB70C6F@groupwbench.org> From: Jeff Scarbrough Date: Mon, 2 Nov 2026 20:20:33 -0500 To: Jim Franklin Subject: Re: [Shop-talk] Cutting a chain link fence post? (Jim Franklin) Cc: shop-talk@autox.team.net Errors-To: shop-talk-bounces@autox.team.net --===============1703496404744653347== --0000000000002ba729065f551255 Content-Transfer-Encoding: quoted-printable On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin wrote: > > Now I need to pull out the ones that need the concrete removed so some ki= d > doesn't ruin their rototiller in 10 years. I've been looking for a metal > head that accepts 3 2x4s for a tripod but can't find any. Is it not a > thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod head > would be as well. A friend has a chan fall I can borrow. > If you plan to bolt it all together, I'm sure there's some combination of drilling angle and bolt or pin that should allow 3 2x4s to be connected to one another without a special bracket. Should be close enough for what you're planning. --0000000000002ba729065f551255 Content-Transfer-Encoding: quoted-printable


On Mon, Nov 2, = 2026 at 3:06=E2=80=AFPM Jim Franklin <jamesf@groupwbench.org> wrote:

Now I need to pull out the ones that need the concrete removed so some kid = doesn't ruin their rototiller in 10 years. I've been looking for a = metal head that accepts 3 2x4s for a tripod but can't find any. Is it n= ot a thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod he= ad would be as well. A friend has a chan fall I can borrow.

If you plan to bolt it all together, I'm sure ther= e's=C2=A0some combination of drilling angle and bolt or pin that should= allow 3 2x4s to be connected to one another without a special bracket.=C2= =A0 =C2=A0Should be close enough=C2=A0for what you're planning.
--0000000000002ba729065f551255-- --===============1703496404744653347== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive --===============1703496404744653347==-- From shop-talk-bounces@autox.team.net Tue Nov 3 23:41:38 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id D2B75A0259 for ; Tue, 3 Nov 2026 23:41:32 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from mail-ua1-f53.google.com (unknown [209.85.222.53]) by autox.team.net (Postfix) with ESMTP id C7453A07A5 for ; Tue, 3 Nov 2026 23:37:29 -0700 (MST) Received: by mail-ua1-f53.google.com with SMTP id a1e0cc1a2514c-990835cec4bso221811241.1 for ; Tue, 03 Nov 2026 22:36:56 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1793774216; cv=none; d=google.com; s=arc-20260327; b=A2YgV6RkMqQzjsIPO0TcBOOFteiUoI1TT21ExRXYf0HNSGjW5buoWZJzGlPQOjZk5o OjpyJJ6/rgKUejwqnsk2/jZokE0WMzNUuQmqlGT6sgLA7qC1pdW2XcJkE4z9Xj2HjTe1 +j3Z8uRbIsBgJE3NCWkBNglrwzKJMFauEMKxdWsyz4w+rN+xqbHxHhrs0czuUgGWN3cE YnzMc/7wtwXentv1cQI6bvl9+3iMKQVUDQdNnT2KuP2L8n8aERA/6ICDAn42Lc2b2l8k W2vwOv+jnJ1NNWudslLGZGP8JtA6Xo/7BXPF5IWCJzuRIB3RzJpB/99VYWT1qGitDbyZ BT2w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20260327; h=cc:to:subject:message-id:date:from:in-reply-to:references bh=IyyXNiv21Thww0CAa/AH51c/7I18RBaH8koIawTED1s=; fh=ltUQzyrj2HMcOXgoTci0aOK46vW4BKfgPeX6A81+Z6g=; b=XnI7r5Rx1O7zUZq6wUSqCZf7Gnh5PTebh8oFgSUbjSNm1U8ZPW3ARoxtCKbFfxJNH7 HJlCH9mPty+qC1NR4DpiJ2Sv+LdvwEcaQCT324BPxTZoUnurtp/zneUUoIUcKHvrIaZM t7Hs7WTGHIFquwo1OSXc2H5XkylPBiE5q0Sx5UQsxLVxddLtkdTnuj6WXvRg5MRFxZBW k0fQnrZv4T6lMMtfg6dXaAOhyImOYEW+ZVhcbXhBiWFa5Dk6I82rjGamnvqhJ9c58Oo0 xsW5CISOqzBI6PqqFeY8HYWF/sPFXLpQpZbqWRfleqeELkAY7R96t2qVtH/F+qdGd0/Y b+2Q==; darn=autox.team.net ARC-Authentication-Results: i=1; mx.google.com; arc=none d=gmail.com; s=20260707; t=1793774216; x=1794379016; darn=autox.team.net; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:from:to:cc:subject:date:message-id:reply-to :content-type; bh=IyyXNiv21Thww0CAa/AH51c/7I18RBaH8koIawTED1s=; b=fghMV2rXyonM8xug02cbCt3ob0B+W55/xk4fvLVe+ZpJXNzCqhrZ2NtYF88VbKUAIr 9lo7s+pmPFO+asteMgcbYE+013SiPCN4NPG23SIMOWWBel3QBzMTiGCEmeWH/ox9/rEp +ghEkkE2CcGFJ37W212eXFHMD6NJIkiBKdRx73Gu8zcuS7zNrY3FqyTIr9EDx3e/Jdon HOph9YAf05NLoaX5BH1dAapJCwwFEk2M08aUj1oSlzeIWZ3gI0q6x8N57AUVmsPmkphP Rb6qX6a0BXaE6ImpwbMavHsHCp9iLE6BJdLFumbSWCJhEOfLns+n5hQ9RRC5riNvTGtC So8g== d=1e100.net; s=20260707; t=1793774216; x=1794379016; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to:content-type; bh=IyyXNiv21Thww0CAa/AH51c/7I18RBaH8koIawTED1s=; b=gs/3Tkzi2gnyI4jkulWHmTPqXLiTcP00TUBl+Pr869SuTmHmiK86IrIbiOTec6+Lxb txd+2gD1xT1+iwxU0GUomyP8LHjY9WA0/zVGEIBqxyUbH/cg/lXuzCglJSd2hRG0XdFM ttFYeIdzOxNMHqFghUZ9HuXXglFye9CwkZKSaJWusXvjS0GNuBlEWOaqTi1oqcFuqBku p0zHQY47U6WVJzt92sL9HTK/JYkKQwyy8HehHwFIBr4J1rTukcrY+cAYVAR93iF48jvu hE2dVn2EqVbwXKEpCc2qXHdobjWbuA7Nx8i77EtlcaBNY7rr4F6CSqBd9jJdYNpiGBLW 5hDA== AKwUvBzeJt9g50tAcQzAHcDABL0I93iSICUi3J4qcuBGqXQiSfemzxGpNVVyjLqFuWPmTWEWe6e4u57T618=@autox.team.net 2nbx3ZeV5vRHOXJxclS866kDpB+mORFOWJLyqveQ3RucxUfRDsZYXAUgGvUetubsxvRuNeL4r2f 4YY1ZGTaERuLkfrUiMVm6hauMw8168fU= Ea1ahbq15rMMdSn3FF0TI7XYlCIfTGLagtyReRGbfLvtDToqIgKeX9SBNJCzHaLjRoBnUQdSKp+ 3V95P2qR05kzFJrLcLYL96q6VsJ1nvH9+24zU3eJQvpb4/EtfzVeTLzOnk2dYGpLmHE0a5DOcJI 6jlxdqio95zklqwZWuYNTSLMohda3blDUyLSK2gN8S6/K/Am07szF5u+4i/7KW79gMIqS0RpRbT 2PMRwbpZDHn8vevjT9LvhBPHbvN7+sQ82D3tSeU+E2pbWyxZ+NarXwrHe4fzkyp6kq0Fm0hZlk5 UBTNnyn0FLV9Rkyg/JTAX3n8txjOnDQvgMEU= ada2fe7eead31-7d072bb37d1mr6831689137.12.1793774215861; Tue, 03 Nov 2026 22:36:55 -0800 (PST) References: <7a04d017-6116-4455-93d4-d32007037e1d@threeboysfarm.com> <35821233-CE60-4C23-A0BE-D095EBB70C6F@groupwbench.org> From: Al Fuller Date: Wed, 4 Nov 2026 00:36:47 -0600 To: Jeff Scarbrough Subject: Re: [Shop-talk] Cutting a chain link fence post? (Jim Franklin) Cc: Shop Talk Errors-To: shop-talk-bounces@autox.team.net --===============7071045555763567154== --000000000000f19e04065f6d9ab3 Content-Transfer-Encoding: quoted-printable I can't tell for sure, but this looks interesting: https://www.legiontargets.com/products/legion-2x4-tripod-stand?variant=3D35= 003472314526 ________________ Sent from my phone Best Regards, Al Fuller On Mon, Nov 2, 2026, 6:55=E2=80=AFPM Jeff Scarbrough = wrote: > > > On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin > wrote: > >> >> Now I need to pull out the ones that need the concrete removed so some >> kid doesn't ruin their rototiller in 10 years. I've been looking for a >> metal head that accepts 3 2x4s for a tripod but can't find any. Is it no= t a >> thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod head >> would be as well. A friend has a chan fall I can borrow. >> > > If you plan to bolt it all together, I'm sure there's some combination of > drilling angle and bolt or pin that should allow 3 2x4s to be connected t= o > one another without a special bracket. Should be close enough for what > you're planning. > _______________________________________________ > > Shop-talk@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.96 > Archive: http://www.team.net/pipermail/shop-talk > http://autox.team.net/archive > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com > > --000000000000f19e04065f6d9ab3 Content-Transfer-Encoding: quoted-printable
I can't tell for sure, but this looks interestin= g:



________________
Sent from my phone <= br>Best Regards,
Al Fuller

On Mon, Nov 2, 202= 6, 6:55=E2=80=AFPM Jeff Scarbrough <fishplate@gmail.com> wrote:


On Mon, Nov 2, 2026 at 3:06=E2=80= =AFPM Jim Franklin <jamesf@groupwbench.org> wrote:
<= blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-l= eft:1px solid rgb(204,204,204);padding-left:1ex">
Now I need to pull out the ones that need the concrete removed so some kid = doesn't ruin their rototiller in 10 years. I've been looking for a = metal head that accepts 3 2x4s for a tripod but can't find any. Is it n= ot a thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod he= ad would be as well. A friend has a chan fall I can borrow.

If you plan to bolt it all together, I'm sure ther= e's=C2=A0some combination of drilling angle and bolt or pin that should= allow 3 2x4s to be connected to one another without a special bracket.=C2= =A0 =C2=A0Should be close enough=C2=A0for what you're planning.
_______________________________________________

Shop-talk@autox.team.net
errer" target=3D"_blank">http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

alk/alfuller194@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">= http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com
--000000000000f19e04065f6d9ab3-- --===============7071045555763567154== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive --===============7071045555763567154==-- From shop-talk-bounces@autox.team.net Wed Nov 4 05:29:06 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 56736A0BB4 for ; Wed, 4 Nov 2026 05:29:06 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from hognose1.porkbun.com (unknown [35.82.102.206]) by autox.team.net (Postfix) with ESMTP id DC647A0B65 for ; Wed, 4 Nov 2026 05:24:12 -0700 (MST) Received: from smtpclient.apple (unknown [68.239.50.138]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) (Authenticated sender: jamesf@groupwbench.org) by hognose1.porkbun.com (Postfix) with ESMTPSA id 0DA8F476CBE; Wed, 4 Nov 2026 12:23:37 +0000 (UTC) s=default; t=1793795018; bh=mm2Dgs01IvaCCqm67tC2r/KsmcvB0r4l+t/bCIsxH0k=; h=From:Subject:Date:In-Reply-To:Cc:To:References; b=zSZVMtkdp7542URgBsuNBX1I6O2G6KTQqFDO4W9bJr9G+GaPsUzQHSXg7rqecIro2 DtSgbaIax9hdL7xdByF7sv4A11jqjrLKLh6NR1oOinfkujiksvgIuO3Py9eVILFsnM V/Ffj5Mt4wlN61n0iiHoB1lfRjZcy3Rp7yvcr9d4= From: Jim Franklin Date: Wed, 4 Nov 2026 07:23:23 -0500 To: Al Fuller References: <7a04d017-6116-4455-93d4-d32007037e1d@threeboysfarm.com> <35821233-CE60-4C23-A0BE-D095EBB70C6F@groupwbench.org> Subject: Re: [Shop-talk] Cutting a chain link fence post? (Jim Franklin) Cc: Shop Talk Errors-To: shop-talk-bounces@autox.team.net --===============7514215995347546257== boundary="Apple-Mail=_7B6A9603-8172-40C1-8C05-19051C843B60" --Apple-Mail=_7B6A9603-8172-40C1-8C05-19051C843B60 Content-Transfer-Encoding: quoted-printable charset=utf-8 I'm not seeing how the 2x4s would attach. Given that product's intended = use, I would assume there'd be an easy way of securing the legs. But it = looks like the bracket just rests on loose 2x4s, which the wind would = topple. Sure I could make a top cap for each 2x4, but that's a rabbit = hole I don't want to get into especially for $89.=20 I had better luck this morning, found one by Vivere for only $200 =F0=9F=98= =B3 =20 I could cram 3 2x4s up into a jack stand, and it has cutouts for a = chain. Hmm.=20 jim > On Nov 4, 2026, at 1:36 AM, Al Fuller wrote: >=20 > I can't tell for sure, but this looks interesting: >=20 > = https://www.legiontargets.com/products/legion-2x4-tripod-stand?variant=3D3= 5003472314526 >=20 >=20 > ________________ > Sent from my phone=20 > Best Regards, > Al Fuller >=20 > On Mon, Nov 2, 2026, 6:55=E2=80=AFPM Jeff Scarbrough = >>=20 >>=20 >> On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin = >>>=20 >>> Now I need to pull out the ones that need the concrete removed so = some kid doesn't ruin their rototiller in 10 years. I've been looking = for a metal head that accepts 3 2x4s for a tripod but can't find any. Is = it not a thing? The 2x4 sawhorse brackets are everywhere, I assumed a = tripod head would be as well. A friend has a chan fall I can borrow. >>=20 >> If you plan to bolt it all together, I'm sure there's some = combination of drilling angle and bolt or pin that should allow 3 2x4s = to be connected to one another without a special bracket. Should be = close enough for what you're planning. >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.96 >> Archive: http://www.team.net/pipermail/shop-talk = http://autox.team.net/archive >>=20 >> Unsubscribe/Manage: = http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com >>=20 --Apple-Mail=_7B6A9603-8172-40C1-8C05-19051C843B60 Content-Transfer-Encoding: quoted-printable charset=utf-8 I'm not seeing = how the 2x4s would attach. Given that product's intended use, I would = assume there'd be an easy way of securing the legs. But it looks like = the bracket just rests on loose 2x4s, which the wind would topple. Sure = I could make a top cap for each 2x4, but that's a rabbit hole I don't = want to get into especially for $89. 

I had = better luck this morning, found one by Vivere for only $200 =F0=9F=98=B3 =  

I could cram 3  2x4s up into a jack = stand, and it has cutouts for a chain. = Hmm. 

jim

On Nov 4, 2026, at 1:36 AM, Al Fuller = <alfuller194@gmail.com> wrote:

I can't = tell for sure, but this looks interesting:



________________
Sent from my = phone
Best Regards,
Al Fuller

On Mon, Nov 2, 2026, 6:55=E2=80=AFPM Jeff = Scarbrough <fishplate@gmail.com> = wrote:


On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin = <jamesf@groupwbench.org> = wrote:

Now I need to pull out the ones that need the concrete removed so some = kid doesn't ruin their rototiller in 10 years. I've been looking for a = metal head that accepts 3 2x4s for a tripod but can't find any. Is it = not a thing? The 2x4 sawhorse brackets are everywhere, I assumed a = tripod head would be as well. A friend has a chan fall I can = borrow.

If you plan to bolt it all = together, I'm sure there's some combination of drilling angle and = bolt or pin that should allow 3 2x4s to be connected to one another = without a special bracket.   Should be close enough for = what you're planning.
_______________________________________________

Shop-talk@autox.team.net
noreferrer" target=3D"_blank">http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

href=3D"http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.= com" rel=3D"noreferrer noreferrer" = target=3D"_blank">http://autox.team.net/mailman/options/shop-talk/alfuller= 194@gmail.com


= --Apple-Mail=_7B6A9603-8172-40C1-8C05-19051C843B60-- --===============7514215995347546257== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive --===============7514215995347546257==-- From shop-talk-bounces@autox.team.net Thu Nov 5 17:17:28 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 16019A1302 for ; Thu, 5 Nov 2026 17:17:28 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from mail-pf1-f178.google.com (unknown [209.85.210.178]) by autox.team.net (Postfix) with ESMTP id 3B39BA10A9 for ; Thu, 5 Nov 2026 14:05:30 -0700 (MST) Received: by mail-pf1-f178.google.com with SMTP id d2e1a72fcca58-8a05da1cc1fso1025302b3a.2 for ; Thu, 05 Nov 2026 13:04:56 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1793912696; cv=none; d=google.com; s=arc-20260327; b=a5Q9sMzUbfw85goRw4k1xmdfc8OATB/xGDTtc6cXXxo9/FjlNG5B2kzpsOR1j+TON1 3fKGJ6UCKD9hVM638BjuAXMW7kwaIVWUM+MxTmYEYGVwJ6EhVhtHyVIXS+P77JzD9nbR 1MXcNutGkzk7yEMCMjEPq7/I4iEJdX2jnG9zvkT2h/HL3f4aOrV3qPB3gCQsBK43UCDI NGjwG6FZUTq/4+F2Wukjk0cPH7HGDsxLxRrXUiHD2wvo7+c2LAScebZ+mwXKFCzeNrpS Me5ywY3YJts4dgwT63wu+YccwmpCn3FT6YKqV+Qh22sMOkNKKKjfCxhgqxjImjskMoNQ RDvA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20260327; h=cc:to:subject:message-id:date:from:in-reply-to:references bh=TXMSjP+Y4boPEDK0vNO0SK5Jx/wuGTaKfnu/vb+x9R8=; fh=3bqTdXi3a81sWVwDRpjTGNuSRBpZyeQnoKBy9iWHGHU=; b=D4L3eoUX0StN0F7q9d8M9/SEu76nLJm3DCSV8rHAd7D8bWFqfIyr/9MCKRo5eMvLyM prtv1m7IprUH+Jj0cNfPY+6UcwXbt5i/nVvhhGnMLYhjUdelar0Gi6wapRY6oEpEELZ4 iHLer9nUkGhjFMxUNJgYLzbphuLTsrVusJA5jjcvgeU3XEklG/M3srTQa2IhtIE3z7vC IIHdh1GKP+qjxwwMOlhw3NJ4rH6gkgxFMTxddu0lW7fsLRUcUOuS/p0LpFsWXM+IWG86 bae3ytUxZMPiAlsFwrnc4mYuWJSpOHixDefEVoqNsk+ROaINSszoYi83t1zlSTVnyabn aHSg==; darn=autox.team.net ARC-Authentication-Results: i=1; mx.google.com; arc=none d=gmail.com; s=20260707; t=1793912696; x=1794517496; darn=autox.team.net; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:from:to:cc:subject:date:message-id:reply-to :content-type; bh=TXMSjP+Y4boPEDK0vNO0SK5Jx/wuGTaKfnu/vb+x9R8=; b=BuoEUGblCZUuW3IOMGmh77UAmxUC1YWhsi7W84/9wv81KUElwYlSQXdvqmD0VYfcx+ bXWnSL+iXHs14RBs6BxqYle/x2U/NxcEZvBg/Ody2Zr7ImNqVHTFTMyn2oHKL06c0zne 5NMIGBA+tAhmj+nqRwfkejLl/HH6uSvqM9EbduA2aeuB6dTVaXKT7kUOi3cu7zgSF3mz 1f59wwPfjRqYXyh1GorFGnj4NHIwvBceYbNL+V1oeTIiJfjMolWxBce10OAsPoxzq8jf jopRqp7asBcEmZb7BGmNyWriM629PKN8QK2NhAr1W7orfHFMTLlTrE27KbyPRyxX7plU S+Ag== d=1e100.net; s=20260707; t=1793912696; x=1794517496; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to:content-type; bh=TXMSjP+Y4boPEDK0vNO0SK5Jx/wuGTaKfnu/vb+x9R8=; b=Yellh1mir2Pg/nQolzxTx3IMHhDOJzTzI+EPTNU8iIyHvHkD8wVLGTAeCIKiWAyZ6K crup2ak8IlV2pvp8fGhb94vDn9EYaviIGXzgP8eD1xPo8qDaYveZqeOiyhO2t3O5gIho TxpYx98+Ie/kMUErEmCfB+bsHZ1zfbbNJI+tydc22vI6omrxuT8H2JdZOLMMPmlvMota CTc9xHkiLQYK/GyJY7vAVc9vG5BFS0egVelp8T7kXyGG78tsbwxaR7zbMGuq1eqRspn7 mxSFK5hOGicO7N/pNLaPbZ8rKvELKC5NP6QeoMTqvlbJWQYzRJV6oOCULFmtkbP+F1jf SqaQ== ExyDCPlajt4tsbplYIymH8aF2tnx07yHNx5KyfF1elIW1KpzF2IeTk4rNs7KF84oMN72OXJuJ4k 4wwFqupDTNbI0G3eQhYpzpkRl1cCufuYaKg== IbLavI1X99XNc9319t7K5om1zl2cVC2OmFvgi0CIAoFgoZtejQmFn7YNhTu7d9b2p1EpPKG4g0s sgRpLg4NOYrnntuPIOskaQgRsQLXQUlezTLCLu/G50nj739VvfqSNHxu5VB/O9GPHLLw4ZHFHF3 gqDKvFSNOVscjxRxRe+75Pm7MrHCAoGH3Nt5sx2iBDlUJFkWDkHCMk9x1YUriJx9ONsvEQtaSkW PRlS7+a+FnLgsHifhNUTqaOhbrxIx3CdU7Y5dZm6LhMFk/yARzjg7/CEqUYd7FSliWmx5aQtKTc F1DItmusqod6xNuElEWPOgksXL4qqP8/IYUVUfWpt6wok64PySeI+Tgw4zgPNzezVa0UN6wQR7b cqACqlI0CsL8C6YtI9gtzL8Hnrlw== d2e1a72fcca58-8b37c241150mr200152b3a.49.1793912696015; Thu, 05 Nov 2026 13:04:56 -0800 (PST) References: From: Philip Ethier Date: Thu, 5 Nov 2026 15:04:20 -0600 To: Jim Franklin Subject: Re: [Shop-talk] Cutting a chain link fence post? Cc: Shop-Talk Errors-To: shop-talk-bounces@autox.team.net --===============1249096285560126675== --00000000000001125a065f8dd901 Content-Transfer-Encoding: quoted-printable There are gizmos for cutting a pipe from the inside. Most are probably for softer pipe. If it was me, I would probably cut them at grade with the sawzall and then reach in with a cutting disc on a dremel to shorten them. It takes a lot of time. I don't know if there are saw disks you can put into a half-inch drill motor. On Thu, Oct 29, 2026 at 12:32=E2=80=AFPM Jim Franklin wrote: > I need to cut down about 20 of these a few inches below grade. The catch > is they are right next to my neighbor's PVC fence, so I can't get to that > side. > > I can use my sawzall but I want the cut parallel to the grade which means > getting the entire sawzall below grade and sucking schmutz into the motor= . > Do-able and at the top of the list so far. > > I was going to rent an excavator (still might) to also remove the concret= e > blob but then I'd need a bunch of fill delivered (none on site but there > may be some when they dig up the driveway to repave it, shelving this ide= a > for a few weeks), hassle factor exceeds the joy of having an excavator. > > Portable bandsaw seems like a useful lifetime tool, especially if it can > be mounted vertically to use as a regular bandsaw and also mounted in a > chop saw table. Internet isn't forthcoming on the viability of these > options. > > Angle grinder won't reach around the back. > > Plasma cutter is contraindicated with neighbor's fence. > > Any other ideas? > > thanks, > jim > _______________________________________________ > > Shop-talk@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.96 > Archive: http://www.team.net/pipermail/shop-talk > http://autox.team.net/archive > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/shop-talk/pethier7@gmail.com > > --=20 Phil Ethier, West Side, Saint Paul Minnesota, USA 2006 Gulf Stream Conquest Super C, 8.1, white 2011 Cayman 2.9 PDK, white 2021 Ford F-150 3500cc twin turbo, white 1991 Caterham 1700 Super Sprint, not white www.mnautox.com --00000000000001125a065f8dd901 Content-Transfer-Encoding: quoted-printable
There are gizmos=C2=A0for cutting a pipe from the inside.=C2=A0 Most are= probably for softer pipe.

If it was me, I would probably cut=C2=A0them at grade with th= e sawzall and then reach in with a cutting disc on a dremel=C2=A0to shorten= them. It takes a lot of time.

I don't know if there are saw disks you can put into = a half-inch drill motor.

On Thu, Oct 29, 2026 at 12:32=E2=80=AFPM Jim = Franklin <ja= mesf@groupwbench.org> wrote:
I need to cut down about 20 of these a few inches below= grade. The catch is they are right next to my neighbor's PVC fence, so= I can't get to that side.

I can use my sawzall but I want the cut parallel to the grade which means g= etting the entire sawzall below grade and sucking schmutz into the motor. D= o-able and at the top of the list so far.

I was going to rent an excavator (still might) to also remove the concrete = blob but then I'd need a bunch of fill delivered (none on site but ther= e may be some when they dig up the driveway to repave it, shelving this ide= a for a few weeks), hassle factor exceeds the joy of having an excavator. <= br>
Portable bandsaw seems like a useful lifetime tool, especially if it can be= mounted vertically to use as a regular bandsaw and also mounted in a chop = saw table. Internet isn't forthcoming on the viability of these options= .

Angle grinder won't reach around the back.

Plasma cutter is contraindicated with neighbor's fence.

Any other ideas?

thanks,
jim
_______________________________________________

Shop-talk@aut= ox.team.net
et=3D"_blank">http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/shop-talk htt= p://autox.team.net/archive

alk/pethier7@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.t= eam.net/mailman/options/shop-talk/pethier7@gmail.com



--
Phil Ethier, West Side, Saint Pau= l Minnesota, USA
2006 Gulf Stream Conquest Super C, 8.1, white
2011 Cayman 2.9 PDK, white
2021 Ford F-150 3500cc twin turbo, white
1991 Caterham 1700 Super Sprint, not white
www.mnautox.com

--00000000000001125a065f8dd901-- --===============1249096285560126675== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive --===============1249096285560126675==-- From shop-talk-bounces@autox.team.net Thu Nov 5 20:58:07 2026 Return-Path: Delivered-To: mharc@autox.team.net Received: from [50.198.190.17] (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id E39FDA069D for ; Thu, 5 Nov 2026 20:58:06 -0700 (MST) Authentication-Results: autox.team.net; Delivered-To: shop-talk@autox.team.net Received: from mail-vs1-f45.google.com (unknown [209.85.217.45]) by autox.team.net (Postfix) with ESMTP id 31A30A0B67 for ; Thu, 5 Nov 2026 20:53:35 -0700 (MST) Received: by mail-vs1-f45.google.com with SMTP id ada2fe7eead31-74ab99038afso196868137.3 for ; Thu, 05 Nov 2026 19:53:01 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1793937181; cv=none; d=google.com; s=arc-20260327; b=TNr/x8X9lG7UNf8Mi5FdoCO6aykspnW/4dYy234Trl1+c3oDHYDc/IMEFQkoX8oksK /HcBUKu+y0CLBQQ21atiaUNfLR+bNxecYHHsn6WZlGMjYc1o6m8O9c9HPxkV2H7sdOn1 PCyXIr6wTPDAqUpKGKnvulrA8DW/9aSPeOWlBtqeKp9IkxlQw/Q9refI7GGGEADakIph a2XRDvNcLzjJw5HpAQODj+sQbKIiHevlP139cLNFkXwOOWsK6kLqJJt5p/HT+nD8s/gg 6V8dbsuyYA1s6ROSC0/aGzGFRXxQ1DdGcRrTV0YNEwK9gbrN7A3r7mA2pv4Eue3dpU/9 W4wA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20260327; h=cc:to:subject:message-id:date:from:in-reply-to:references bh=sCFhDT+4Oua/QuXEks6kBN0LjfTU1Ip2Ka+5M7LvBvw=; fh=3OE0YAUBnFhq6nPBHfbsFD6gATBUvMh+X+zZT9UWQWQ=; b=h5lZYAXHruU4TWx63D3++U2CIHP8vMM7JNIDCDCnr2WQIezRPx78f0tilqQ3VR9r2u GREC5eoyHqN6Rl7yECK7m0jvZ+dDy2fjFh/yMfwvKUKry32YK/clsrPGkCfKp1y8FY/S xvMO7NtZTofcT3CgvcIfNZI9Grjj9ZbtQNJCqlg5CeNEfqGYwePrtOKHoxSZL8awVqZa fcI1FJW0G1SVkdYupQeCo0N5aFvXfs5UvNGyFW3SUDwcqrgUayZPto8tdxyf1BdGyI6n PGL3q00NzRTK68gB+AUymT7WpXp7o1BIO6h5AdaO6epJ0KZREvjSdpLC2vaE9qIEj+jM OnQQ==; darn=autox.team.net ARC-Authentication-Results: i=1; mx.google.com; arc=none d=gmail.com; s=20260707; t=1793937181; x=1794541981; darn=autox.team.net; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:from:to:cc:subject:date:message-id:reply-to :content-type; bh=sCFhDT+4Oua/QuXEks6kBN0LjfTU1Ip2Ka+5M7LvBvw=; b=o5k4knI9KU32FoORo3V5pntLQKjJ2b4F0pjlIZpKTFJ58H9hkVnFLIj83dXvtHPadw T1NoKpwRAlS74IQZoB8YiNcV5qfDptYw9IqySTwYW/t2xDBOK5YtjSpo0tz60ZFO0y+x RH7WDYQBjQ4MR8XLpf4UDgIO/T7ySoi9/iUZVJdKt0aNELv7XEz4dm707Hbq/J+nNv13 d3rYAaIyvQICOLgFibrPNhSFsrU7zGlvJC8z+531qwcgiiBUBAAkFv2/VX2mxWeCUb7u iov7ToV8w7gqRwKR/kGSLu+upVVkDLKctF7e8s+OcEBY+befVRl6T3TlMb3ypEQzA/HW 4JsA== d=1e100.net; s=20260707; t=1793937181; x=1794541981; h=content-type:cc:to:subject:message-id:date:from:in-reply-to :references:mime-version:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to:content-type; bh=sCFhDT+4Oua/QuXEks6kBN0LjfTU1Ip2Ka+5M7LvBvw=; b=zPtlbFdrfdiJjVxRp4gj0tZ9ZYXBWb69O6jd4X/LXWkZMRO+HgduoXSNoa0WODJv8H bl1VbxLBXsrZ2U4cvHsyxvdvML8vWFwYiRROItlu59dcFO+fhPkpphM/hccDSgAeHgdW R9rX0eT2SCdikeoPFIl0vgnI9x09OW8bK55Ko3WAYXGs1yHmOqb3CRo9dGiUgvKanext rkAhEJ3XjjVIi2xs/cS49DnDdQ0VLrIGek200XbciCo5FCAh4w+3TYrmWrqTCNy9iHSP 2S8BrH4fxo2PyuR0GTwHuSi9cBZKj/3dfDxnec5uM3ZWI29gDfI/Fo20WzIuSqG4eGDm Fg1g== AKwUvBwf8wS7OIMDW99D3Tnug93q1putTxmz3b+1mXTOExjrXTuiBd9jUJYD3roHlpajMjwZzXAn5B307VE=@autox.team.net gpRxL8mPGg7dDX94liY4qnSlh/HK/lrjsqqeVjatecawysF9wcZmwHTZnOc0RLA6haSD9ZjA1so JlZWT3wZLg+AFaN8ECQRYE9djAUVTxVs= s2Ny9koaMKorK6yBqKzipO8no9CRnWcQrj1XCXQdq6YEtCpTQ1sHE5ZlTi6a2oKiiAdwKkbwidl AGX1a36M5HwIAL0M0oYw/gy0ODH1oKPs6RJ6U59G4Ply/rtXrQ6moBJczjDlqbKO7MO5xPCSxIJ 9yQk9Sa7zug0eCEov2avNBb1+Kqu5Q4w8UAe5J6SEb31Oe0zG20IhjJVX7gndeO+GYxgwtHEbQe IRsqc181mFeSJ6dyIQWCa1JT2cb4eLAEm9+m1tQA0g6C51tTSVTQyWmyvRN+pJ2D4PBvmRGzCek U0WP4FoY6R9/N52nxKoHxO3X2sXjejSUhE+XW48WYNXnmbKWfkKCu420hhA== ada2fe7eead31-7d2a153f15fmr971880137.8.1793937181101; Thu, 05 Nov 2026 19:53:01 -0800 (PST) References: <7a04d017-6116-4455-93d4-d32007037e1d@threeboysfarm.com> <35821233-CE60-4C23-A0BE-D095EBB70C6F@groupwbench.org> From: Al Fuller Date: Thu, 5 Nov 2026 19:52:50 -0800 To: Jim Franklin Subject: Re: [Shop-talk] Cutting a chain link fence post? (Jim Franklin) Cc: Shop Talk Errors-To: shop-talk-bounces@autox.team.net --===============0754520679466799854== --0000000000006dd52c065f938cec Content-Transfer-Encoding: quoted-printable Yeah, their pictures don't show it in use. I assume each of the 2x4s would go up through one of the rectangular stampings... ________________ Sent from my phone Best Regards, Al Fuller On Wed, Nov 4, 2026, 4:23=E2=80=AFAM Jim Franklin = wrote: > I'm not seeing how the 2x4s would attach. Given that product's intended > use, I would assume there'd be an easy way of securing the legs. But it > looks like the bracket just rests on loose 2x4s, which the wind would > topple. Sure I could make a top cap for each 2x4, but that's a rabbit hol= e > I don't want to get into especially for $89. > > I had better luck this morning, found one by Vivere for only $200 =F0=9F= =98=B3 > > I could cram 3 2x4s up into a jack stand, and it has cutouts for a chain= . > Hmm. > > jim > > On Nov 4, 2026, at 1:36 AM, Al Fuller wrote: > > I can't tell for sure, but this looks interesting: > > > https://www.legiontargets.com/products/legion-2x4-tripod-stand?variant=3D= 35003472314526 > > > ________________ > Sent from my phone > Best Regards, > Al Fuller > > On Mon, Nov 2, 2026, 6:55=E2=80=AFPM Jeff Scarbrough wrote: > >> >> >> On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin >> wrote: >> >>> >>> Now I need to pull out the ones that need the concrete removed so some >>> kid doesn't ruin their rototiller in 10 years. I've been looking for a >>> metal head that accepts 3 2x4s for a tripod but can't find any. Is it n= ot a >>> thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod hea= d >>> would be as well. A friend has a chan fall I can borrow. >>> >> >> If you plan to bolt it all together, I'm sure there's some combination o= f >> drilling angle and bolt or pin that should allow 3 2x4s to be connected = to >> one another without a special bracket. Should be close enough for what >> you're planning. >> _______________________________________________ >> >> Shop-talk@autox.team.net >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.96 >> Archive: http://www.team.net/pipermail/shop-talk >> http://autox.team.net/archive >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/shop-talk/alfuller194@gmail.com >> >> > --0000000000006dd52c065f938cec Content-Transfer-Encoding: quoted-printable
Yeah, their pictures don't show it in use. I ass= ume each of the 2x4s would go up through one of the rectangular stampings..= .

_____________= ___
Sent from my phone
Best Regards,
Al Fuller

On Wed, Nov 4, 2026, 4:23=E2=80=AFAM Jim Franklin <jamesf@groupwbench.org> wrote:
I'm not seeing how the 2x4s would attach. Given that product's in= tended use, I would assume there'd be an easy way of securing the legs.= But it looks like the bracket just rests on loose 2x4s, which the wind wou= ld topple. Sure I could make a top cap for each 2x4, but that's a rabbi= t hole I don't want to get into especially for $89.=C2=A0

I had better luck this morning, found one by Vivere for only $200 =F0= =9F=98=B3 =C2=A0

I could cram 3 =C2=A02x4s up into= a jack stand, and it has cutouts for a chain. Hmm.=C2=A0
jim

On Nov 4, 2026,= at 1:36 AM, Al Fuller <alfuller194@gmail.com> wrote:
I can't tell for sure, but this looks int= eresting:



________________
Sent from my phone
Best Regards,
Al Fuller

On Mon, Nov 2, 2026, 6:55=E2=80=AFPM Jeff Scarbrough <fishplate@gmai= l.com> wrote:


On Mon, Nov 2, 2026 at 3:06=E2=80=AFPM Jim Franklin= <jamesf@groupwbench.org> wrote:

Now I need to pull out the ones that need the concrete removed so some kid = doesn't ruin their rototiller in 10 years. I've been looking for a = metal head that accepts 3 2x4s for a tripod but can't find any. Is it n= ot a thing? The 2x4 sawhorse brackets are everywhere, I assumed a tripod he= ad would be as well. A friend has a chan fall I can borrow.

If you plan to bolt it all together, I'm sure ther= e's=C2=A0some combination of drilling angle and bolt or pin that should= allow 3 2x4s to be connected to one another without a special bracket.=C2= =A0 =C2=A0Should be close enough=C2=A0for what you're planning.
_______________________________________________

Shop-talk@autox.team.net
errer noreferrer" target=3D"_blank">http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/= shop-talk http://autox.team.net/archive
alk/alfuller194@gmail.com" rel=3D"noreferrer noreferrer noreferrer" target= =3D"_blank">http://autox.team.net/mailman/options/shop-talk/alfuller194@gma= il.com


--0000000000006dd52c065f938cec-- --===============0754520679466799854== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Shop-talk@autox.team.net Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive --===============0754520679466799854==--