From mgs-bounces@autox.team.net Sun Oct 7 16:20:34 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 16A5D2588AEB for ; Sun, 7 Oct 2018 16:20:34 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from d.mail.sonic.net (d.mail.sonic.net [64.142.111.50]) by autox.team.net (Postfix) with ESMTP id CFD3D2588762 for ; Sun, 7 Oct 2018 15:04:57 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by d.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w97L4nFu015988 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Sun, 7 Oct 2018 14:04:50 -0700 Date: Sun, 7 Oct 2018 14:04:49 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============5367999745430534380== boundary="Apple-Mail=_FCC46F58-2E0A-4EC0-B941-3251024B50B1" --Apple-Mail=_FCC46F58-2E0A-4EC0-B941-3251024B50B1 Content-Transfer-Encoding: quoted-printable charset=utf-8 I just got the engine back together, but now the temperature gauge is = malfunctioning. It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. Anyone seen this before? Any suggestions? -- Max Heim '66 MGB > On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs = wrote: >=20 > Actually, when we finally got to my house, we swapped the luggage into = my 1967 Barracuda convertible and headed up the freeway to catch up with = the Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm. >=20 > Not the first participants to have to pull in a backup vehicle=E2=80=A6 >=20 > The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D = the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >=20 > With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, = and the radiator shop said it was irreparable other than by completely = recoring it. >=20 > -- > Max Heim > '66 MGB >=20 >> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >=20 >> A bummer that you couldn't participate in the melee, Max, I bet you = were disappointed. Good recovery by Moss, though.=20 >>=20 >> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>=20 >> Dan D >> '76B, '65B >> Central NJ USA >> http://dandibiase.cbintouch.com/ >>=20 >> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs > I haven=E2=80=99t said much on the list about my project. but I got = my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the start of = the California Melee on Sept. 8. Unfortunately, a blade flew off the new = Moss plastic fan within the first ten miles and punctured the radiator, = so that was as far as it got =E2=80=94 from the San Francisco Presidio = to Marin Civic Center.=20 >>=20 >> I made the mistake of trying to get it to the next exit (it was a bad = place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>=20 >> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>=20 >> But regardless, they decided to send me a new fan ("new model" nylon = 7-blade fan) and a new aluminum radiator (the shop had told me mine was = irreparable). I thought this was pretty decent of them. >>=20 >> I just picked up my head at the machine shop where they had skimmed = the surface and cleaned up the valves. In the meantime I had inspected = the lifters based on a tip from Dave at British Motorsports in Campbell = and found a few of them were showing pitting. By replacing them now I = can save the cam. >>=20 >> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>=20 >> A few tips based on my experience: >>=20 >> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>=20 >> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>=20 >> 3. If you have a yellow plastic 7-bladed fan from Moss USA purchased = prior to mid-2015, you may want to consider retiring it. I suppose if it = hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air = bubbles in a critical location. But they had perhaps a dozen reported = incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>=20 >> Buy British, Buy Best! >>=20 >> -- >> Max Heim >> '66 MGB >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html = >> Suggested annual donation $12.75 >>=20 >> Archive: http://www.team.net/pipermail/mgs = >>=20 >> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >=20 > _______________________________________________ >=20 > Mgs@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 >=20 > Archive: http://www.team.net/pipermail/mgs >=20 > Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net --Apple-Mail=_FCC46F58-2E0A-4EC0-B941-3251024B50B1 Content-Transfer-Encoding: quoted-printable charset=utf-8 I just got the engine back together, but now the temperature = gauge is malfunctioning.

It seems to have got stuck at about 220. That=E2=80=99s what = it was reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180.

Anyone seen this before? Any = suggestions?

--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net> = wrote:

Actually, when = we finally got to my house, we swapped the luggage into my 1967 = Barracuda convertible and headed up the freeway to catch up with the = Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm.

Not the first = participants to have to pull in a backup vehicle=E2=80=A6

The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max Heim
'66 MGB

On Sep 26, 2018, at 3:56 AM, Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you couldn't participate in the melee, Max, I = bet you were disappointed. Good recovery by Moss, though. 

Just tells you how fast = these things spin, for a plastic blade to puncture a metal = radiator! 

Dan = D
'76B, '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99= t said much on the list about my project. but I got my =E2=80=9Cnew=E2=80=9D= 66 B roadster together in time for the start of the California Melee on = Sept. 8. Unfortunately, a blade flew off the new Moss plastic fan within = the first ten miles and punctured the radiator, so that was as far as it = got =E2=80=94 from the San Francisco Presidio to Marin Civic = Center. 

I = made the mistake of trying to get it to the next exit (it was a bad = place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination = of the stub revealed an air pocket in the plastic right at the center of = the base of the blade. Moss accepted my photo of this as evidence of a = manufacturing flaw. This model of fan was already out of production (and = out of warranty) =E2=80=94 I had purchased it as part of a large order = back in 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max = Heim
'66 = MGB
_______________________________________________
=
Mgs@autox.team.net
target=3D"_blank" class=3D"">http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: =  $12.75

Archive: = http://www.team.net/pipermail/mgs

Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net

= --Apple-Mail=_FCC46F58-2E0A-4EC0-B941-3251024B50B1-- --===============5367999745430534380== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============5367999745430534380==-- From mgs-bounces@autox.team.net Sun Oct 7 18:07:58 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 1F4FC2588AE3 for ; Sun, 7 Oct 2018 18:07:58 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from c.mail.sonic.net (c.mail.sonic.net [64.142.111.80]) by autox.team.net (Postfix) with ESMTP id 04D272588734 for ; Sun, 7 Oct 2018 17:38:12 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by c.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w97Nc5jd019051 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Sun, 7 Oct 2018 16:38:05 -0700 Date: Sun, 7 Oct 2018 16:38:04 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============1764563722457269615== boundary="Apple-Mail=_BD2ACD4E-80DC-44C5-BA15-E7060A518015" --Apple-Mail=_BD2ACD4E-80DC-44C5-BA15-E7060A518015 Content-Transfer-Encoding: quoted-printable charset=utf-8 How could the capsule get damaged? I unscrewed it from the head, and gently pulled the tube out of the way. = Then I replaced it after replacing the head. Unfortunately, it never occurred to me to see what the gauge was reading = while the head was off and the capsule was resting on the inner fender. I=E2=80=99m not sure what the test would demonstrate. I already know it = responds to temperature changes, so the capillary tube is not broken. = The problem seems to be at the gauge end. I just can=E2=80=99t figure = out what that would be. I know there is a flattened tube rolled into a coil inside the gauge. = Could it have unrolled beyond its intended limit during the overheating = episode, and is now hung up on some protuberance inside the housing, = preventing it from recoiling? -- Max Heim mvheim@sonic.net > On Oct 7, 2018, at 3:49 PM, B H wrote: >=20 > Yours has the non-electric temp sender and gauge?=20 > If it does, the gauge is moved by pressure of expanding ether in the = little capsule that is screwed into the engine. If it reads 220 from the = beginning, my guess is that the capsule got squeezed or the tube damaged = during the R&R. > Test by removing capsule from engine, and putting it into a pan of = hot water. Check the temp with your hand-held thermometer. > Bob >=20 >=20 > On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs I just got the engine back together, but now the temperature gauge is = malfunctioning. >=20 > It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. >=20 > Anyone seen this before? Any suggestions? >=20 >=20 > -- > Max Heim > '66 MGB >=20 >> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs >=20 >> Actually, when we finally got to my house, we swapped the luggage = into my 1967 Barracuda convertible and headed up the freeway to catch up = with the Melee. Reached the first night=E2=80=99s stop in Red Bluff by = 7pm. >>=20 >> Not the first participants to have to pull in a backup vehicle=E2=80=A6= >>=20 >> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D = the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >>=20 >> With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, = and the radiator shop said it was irreparable other than by completely = recoring it. >>=20 >> -- >> Max Heim >> '66 MGB >>=20 >>> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >>=20 >>> A bummer that you couldn't participate in the melee, Max, I bet you = were disappointed. Good recovery by Moss, though.=20 >>>=20 >>> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>>=20 >>> Dan D >>> '76B, '65B >>> Central NJ USA >>> http://dandibiase.cbintouch.com/ >>>=20 >>> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs = >>> I haven=E2=80=99t said much on the list about my project. but I got = my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the start of = the California Melee on Sept. 8. Unfortunately, a blade flew off the new = Moss plastic fan within the first ten miles and punctured the radiator, = so that was as far as it got =E2=80=94 from the San Francisco Presidio = to Marin Civic Center.=20 >>>=20 >>> I made the mistake of trying to get it to the next exit (it was a = bad place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>>=20 >>> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>>=20 >>> But regardless, they decided to send me a new fan ("new model" nylon = 7-blade fan) and a new aluminum radiator (the shop had told me mine was = irreparable). I thought this was pretty decent of them. >>>=20 >>> I just picked up my head at the machine shop where they had skimmed = the surface and cleaned up the valves. In the meantime I had inspected = the lifters based on a tip from Dave at British Motorsports in Campbell = and found a few of them were showing pitting. By replacing them now I = can save the cam. >>>=20 >>> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>>=20 >>> A few tips based on my experience: >>>=20 >>> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>>=20 >>> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>>=20 >>> 3. If you have a yellow plastic 7-bladed fan from Moss USA purchased = prior to mid-2015, you may want to consider retiring it. I suppose if it = hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air = bubbles in a critical location. But they had perhaps a dozen reported = incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>>=20 >>> Buy British, Buy Best! >>>=20 >>> -- >>> Max Heim >>> '66 MGB >>> _______________________________________________ >>>=20 >>> Donate: http://www.team.net/donate.html = >>> Suggested annual donation $12.75 >>>=20 >>> Archive: http://www.team.net/pipermail/mgs = >>>=20 >>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >>=20 >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html = >> Suggested annual donation $12.75 >>=20 >> Archive: http://www.team.net/pipermail/mgs = >>=20 >> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net = >=20 > _______________________________________________ >=20 > Donate: http://www.team.net/donate.html = > Suggested annual donation $12.75 >=20 > Archive: http://www.team.net/pipermail/mgs = >=20 > Unsubscribe: = http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com = --Apple-Mail=_BD2ACD4E-80DC-44C5-BA15-E7060A518015 Content-Transfer-Encoding: quoted-printable charset=utf-8 How could the capsule get damaged?

I unscrewed it from the head, and = gently pulled the tube out of the way. Then I replaced it after = replacing the head.

Unfortunately, it never occurred to me to see what the gauge = was reading while the head was off and the capsule was resting on the = inner fender.

I=E2=80=99m not sure what the test would demonstrate. I = already know it responds to temperature changes, so the capillary tube = is not broken. The problem seems to be at the gauge end. I just can=E2=80=99= t figure out what that would be.

I know there is a flattened tube rolled = into a coil inside the gauge. Could it have unrolled beyond its intended = limit during the overheating episode, and is now hung up on some = protuberance inside the housing, preventing it from recoiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <mgbobh@gmail.com> = wrote:

  Yours has the non-electric temp sender = and gauge? 
  If it does, the gauge is moved = by pressure of expanding ether in the little capsule that is screwed = into the engine. If it reads 220 from the beginning, my guess is that = the capsule got squeezed or the tube damaged during the = R&R.
  Test by removing capsule from = engine, and putting it into a pan of hot water. Check the temp with your = hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
I just got the engine back = together, but now the temperature gauge is malfunctioning.

It seems to have got = stuck at about 220. That=E2=80=99s what it was reading before I even = tried to start the car. After warming up to operating temp (estimated, = of course), the gauge had climbed into the oil pressure zone, reading at = 85 psi. At this point my cheap temp gun had the thermostat housing at = around 180.

Anyone seen this before? Any suggestions?


--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net> wrote:

Actually, = when we finally got to my house, we swapped the luggage into my 1967 = Barracuda convertible and headed up the freeway to catch up with the = Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm.

Not the first = participants to have to pull in a backup vehicle=E2=80=A6

The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 3:56 AM, = Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you couldn't = participate in the melee, Max, I bet you were disappointed. Good = recovery by Moss, though. 

Just tells you how fast these things spin, for a plastic = blade to puncture a metal radiator! 

Dan D
'76B, = '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99= t said much on the list about my project. but I got my =E2=80=9Cnew=E2=80=9D= 66 B roadster together in time for the start of the California Melee on = Sept. 8. Unfortunately, a blade flew off the new Moss plastic fan within = the first ten miles and punctured the radiator, so that was as far as it = got =E2=80=94 from the San Francisco Presidio to Marin Civic = Center. 

I = made the mistake of trying to get it to the next exit (it was a bad = place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination = of the stub revealed an air pocket in the plastic right at the center of = the base of the blade. Moss accepted my photo of this as evidence of a = manufacturing flaw. This model of fan was already out of production (and = out of warranty) =E2=80=94 I had purchased it as part of a large order = back in 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max Heim
'66 = MGB
___________________________________= ____________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested = annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net<= br class=3D"">

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com<= /blockquote>
= --Apple-Mail=_BD2ACD4E-80DC-44C5-BA15-E7060A518015-- --===============1764563722457269615== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============1764563722457269615==-- From mgs-bounces@autox.team.net Sun Oct 7 18:29:45 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id EA6362587B47 for ; Sun, 7 Oct 2018 18:29:44 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from c.mail.sonic.net (c.mail.sonic.net [64.142.111.80]) by autox.team.net (Postfix) with ESMTP id C5A6D258809B for ; Sun, 7 Oct 2018 17:44:40 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by c.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w97NiRds025340 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Sun, 7 Oct 2018 16:44:28 -0700 Date: Sun, 7 Oct 2018 16:44:27 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============4347540894879140914== boundary="Apple-Mail=_33816830-2B4A-489C-A46A-11CDF7AF087A" --Apple-Mail=_33816830-2B4A-489C-A46A-11CDF7AF087A Content-Transfer-Encoding: quoted-printable charset=utf-8 Here=E2=80=99s what Joey at MoMa Instrument Repair had to suggest: "It means that the movement itself is deformed that is why it=E2=80=99s= way out of calibration. Some of those we can repair by reshaping the = movement carefully or just replace the movement. It=E2=80=99s not an = easy fix at all. You can send it and it will all depend on the extent of = the damage if we can repair or replace movement. Thanks Joey" =E2=80=A6which sounds kind of like what I was suggesting. Damn. The = problem is, the car is undriveable with the gauge removed =E2=80=94 it = leaves an open passage to both coolant and oil. I=E2=80=99ve only had = the car running for two weeks all year=E2=80=A6 kind of running out of = nice weather=E2=80=A6 Grr. I think I may try to buy a good one to swap in while having this one = repaired, then sell one later. -- Max Heim '66 MGB > On Oct 7, 2018, at 4:38 PM, Max Heim wrote: >=20 > How could the capsule get damaged? >=20 > I unscrewed it from the head, and gently pulled the tube out of the = way. Then I replaced it after replacing the head. >=20 > Unfortunately, it never occurred to me to see what the gauge was = reading while the head was off and the capsule was resting on the inner = fender. >=20 > I=E2=80=99m not sure what the test would demonstrate. I already know = it responds to temperature changes, so the capillary tube is not broken. = The problem seems to be at the gauge end. I just can=E2=80=99t figure = out what that would be. >=20 > I know there is a flattened tube rolled into a coil inside the gauge. = Could it have unrolled beyond its intended limit during the overheating = episode, and is now hung up on some protuberance inside the housing, = preventing it from recoiling? >=20 >=20 > -- > Max Heim >=20 >=20 >=20 >> On Oct 7, 2018, at 3:49 PM, B H >=20 >> Yours has the non-electric temp sender and gauge?=20 >> If it does, the gauge is moved by pressure of expanding ether in = the little capsule that is screwed into the engine. If it reads 220 from = the beginning, my guess is that the capsule got squeezed or the tube = damaged during the R&R. >> Test by removing capsule from engine, and putting it into a pan of = hot water. Check the temp with your hand-held thermometer. >> Bob >>=20 >>=20 >> On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs > I just got the engine back together, but now the temperature gauge is = malfunctioning. >>=20 >> It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. >>=20 >> Anyone seen this before? Any suggestions? >>=20 >>=20 >> -- >> Max Heim >> '66 MGB >>=20 >>> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs >>=20 >>> Actually, when we finally got to my house, we swapped the luggage = into my 1967 Barracuda convertible and headed up the freeway to catch up = with the Melee. Reached the first night=E2=80=99s stop in Red Bluff by = 7pm. >>>=20 >>> Not the first participants to have to pull in a backup vehicle=E2=80=A6= >>>=20 >>> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D = the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >>>=20 >>> With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, = and the radiator shop said it was irreparable other than by completely = recoring it. >>>=20 >>> -- >>> Max Heim >>> '66 MGB >>>=20 >>>> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >>>=20 >>>> A bummer that you couldn't participate in the melee, Max, I bet you = were disappointed. Good recovery by Moss, though.=20 >>>>=20 >>>> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>>>=20 >>>> Dan D >>>> '76B, '65B >>>> Central NJ USA >>>> http://dandibiase.cbintouch.com/ >>>>=20 >>>> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs = >>>> I haven=E2=80=99t said much on the list about my project. but I got = my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the start of = the California Melee on Sept. 8. Unfortunately, a blade flew off the new = Moss plastic fan within the first ten miles and punctured the radiator, = so that was as far as it got =E2=80=94 from the San Francisco Presidio = to Marin Civic Center.=20 >>>>=20 >>>> I made the mistake of trying to get it to the next exit (it was a = bad place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>>>=20 >>>> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>>>=20 >>>> But regardless, they decided to send me a new fan ("new model" = nylon 7-blade fan) and a new aluminum radiator (the shop had told me = mine was irreparable). I thought this was pretty decent of them. >>>>=20 >>>> I just picked up my head at the machine shop where they had skimmed = the surface and cleaned up the valves. In the meantime I had inspected = the lifters based on a tip from Dave at British Motorsports in Campbell = and found a few of them were showing pitting. By replacing them now I = can save the cam. >>>>=20 >>>> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>>>=20 >>>> A few tips based on my experience: >>>>=20 >>>> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>>>=20 >>>> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>>>=20 >>>> 3. If you have a yellow plastic 7-bladed fan from Moss USA = purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>>>=20 >>>> Buy British, Buy Best! >>>>=20 >>>> -- >>>> Max Heim >>>> '66 MGB >>>> _______________________________________________ >>>>=20 >>>> Donate: http://www.team.net/donate.html = >>>> Suggested annual donation $12.75 >>>>=20 >>>> Archive: http://www.team.net/pipermail/mgs = >>>>=20 >>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >>>=20 >>> _______________________________________________ >>>=20 >>> Donate: http://www.team.net/donate.html = >>> Suggested annual donation $12.75 >>>=20 >>> Archive: http://www.team.net/pipermail/mgs = >>>=20 >>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net = >>=20 >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html = >> Suggested annual donation $12.75 >>=20 >> Archive: http://www.team.net/pipermail/mgs = >>=20 >> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com = --Apple-Mail=_33816830-2B4A-489C-A46A-11CDF7AF087A Content-Transfer-Encoding: quoted-printable charset=utf-8 Here=E2=80=99s what Joey at MoMa Instrument Repair had to = suggest:

  =  "It means that the movement itself is deformed that is why it=E2=80=99= s way out of calibration. Some of those we can repair by reshaping the = movement carefully or just replace the movement. It=E2=80=99s not an = easy fix at all. You can send it and it will all depend on the extent of = the damage if we can repair or replace movement. Thanks Joey"

=E2=80=A6which sounds = kind of like what I was suggesting. Damn. The problem is, the car is = undriveable with the gauge removed =E2=80=94 it leaves an open passage = to both coolant and oil. I=E2=80=99ve only had the car running for two = weeks all year=E2=80=A6 kind of running out of nice weather=E2=80=A6 = Grr.

I think I = may try to buy a good one to swap in while having this one repaired, = then sell one later.

--
Max Heim
'66 MGB

On Oct 7, 2018, at 4:38 PM, Max Heim <mvheim@sonic.net> = wrote:

How could the = capsule get damaged?

I= unscrewed it from the head, and gently pulled the tube out of the way. = Then I replaced it after replacing the head.

Unfortunately, it never occurred to me = to see what the gauge was reading while the head was off and the capsule = was resting on the inner fender.

I=E2=80=99m not sure what the test = would demonstrate. I already know it responds to temperature changes, so = the capillary tube is not broken. The problem seems to be at the gauge = end. I just can=E2=80=99t figure out what that would be.

I know there is a = flattened tube rolled into a coil inside the gauge. Could it have = unrolled beyond its intended limit during the overheating episode, and = is now hung up on some protuberance inside the housing, preventing it = from recoiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <mgbobh@gmail.com> = wrote:

  Yours has the non-electric temp sender = and gauge? 
  If it does, the gauge is moved = by pressure of expanding ether in the little capsule that is screwed = into the engine. If it reads 220 from the beginning, my guess is that = the capsule got squeezed or the tube damaged during the = R&R.
  Test by removing capsule from = engine, and putting it into a pan of hot water. Check the temp with your = hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
I just got the engine back = together, but now the temperature gauge is malfunctioning.

It seems to have got = stuck at about 220. That=E2=80=99s what it was reading before I even = tried to start the car. After warming up to operating temp (estimated, = of course), the gauge had climbed into the oil pressure zone, reading at = 85 psi. At this point my cheap temp gun had the thermostat housing at = around 180.

Anyone seen this before? Any suggestions?


--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net> wrote:

Actually, = when we finally got to my house, we swapped the luggage into my 1967 = Barracuda convertible and headed up the freeway to catch up with the = Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm.

Not the first = participants to have to pull in a backup vehicle=E2=80=A6

The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 3:56 AM, = Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you couldn't = participate in the melee, Max, I bet you were disappointed. Good = recovery by Moss, though. 

Just tells you how fast these things spin, for a plastic = blade to puncture a metal radiator! 

Dan D
'76B, = '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99= t said much on the list about my project. but I got my =E2=80=9Cnew=E2=80=9D= 66 B roadster together in time for the start of the California Melee on = Sept. 8. Unfortunately, a blade flew off the new Moss plastic fan within = the first ten miles and punctured the radiator, so that was as far as it = got =E2=80=94 from the San Francisco Presidio to Marin Civic = Center. 

I = made the mistake of trying to get it to the next exit (it was a bad = place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination = of the stub revealed an air pocket in the plastic right at the center of = the base of the blade. Moss accepted my photo of this as evidence of a = manufacturing flaw. This model of fan was already out of production (and = out of warranty) =E2=80=94 I had purchased it as part of a large order = back in 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max Heim
'66 = MGB
___________________________________= ____________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested = annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net<= br class=3D"">

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com<= /blockquote>


= --Apple-Mail=_33816830-2B4A-489C-A46A-11CDF7AF087A-- --===============4347540894879140914== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============4347540894879140914==-- From mgs-bounces@autox.team.net Sun Oct 7 18:52:07 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 098232588A51 for ; Sun, 7 Oct 2018 18:52:07 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from gproxy5-pub.mail.unifiedlayer.com (gproxy5-pub.mail.unifiedlayer.com [67.222.38.55]) by autox.team.net (Postfix) with ESMTP id A3D4025886E7 for ; Sun, 7 Oct 2018 18:10:39 -0600 (MDT) Received: from cmgw14.unifiedlayer.com (unknown [10.9.0.14]) by gproxy5.mail.unifiedlayer.com (Postfix) with ESMTP id 2DB551404CE for ; Sun, 7 Oct 2018 18:10:34 -0600 (MDT) Received: from box522.bluehost.com ([74.220.219.122]) by cmsmtp with ESMTP id 9J86gJrvrvdTu9J86ggEAd; Sun, 07 Oct 2018 18:10:34 -0600 ; s=default; h=Content-Transfer-Encoding:Content-Type:Mime-Version:References :In-Reply-To:Subject:From:To:Date:Sender:Reply-To:Message-ID:Cc:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=YgsUnr54wSGZ6HdW9YdQ18NwJWL7afETeN9bkTCKXgs=; b=zhXxKUmkq1sgFUMKuOyS0N7XPk /jIvtIbGM+5Ily4TjZsFN8Fd4UX88+CHWljfqO4fNVmn2LWv4hkn7++C0LPZamyVeeuv+GlAHlh9e Cu8pqDoMBxUmDrdzTrB6Os2t9; Received: from c-76-24-166-40.hsd1.ma.comcast.net ([76.24.166.40]:51449 helo=BarneysPC.mgaguru.com) by box522.bluehost.com with esmtpa (Exim 4.91) (envelope-from ) id 1g9J85-0033ue-Oy; Sun, 07 Oct 2018 18:10:33 -0600 Date: Sun, 07 Oct 2018 20:10:16 -0400 To: Max Heim ,mglist References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> please include it with any abuse report [76.24.166.40]:51449 Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Barney Gaylord via Mgs Content-Transfer-Encoding: quoted-printable Errors-To: mgs-bounces@autox.team.net Remove the gauge from the dash. Unscrew the font = chome ring to remove the face glass. Place the = sensor bulb in boiling water. Pull off the = needle, reposition it to point at 212dF, and = press it back on. You can then use a thermometer = with variable water temperatures to check if the = gauge reads correctly at diffeent temperatures. When it works properly it can read higher = temperatures up into the oil pressure range. The = temperature needle should run out of mechanical = travel around 82-psi (if you can warm it up to = about 250dF). If it stops before it gets that = far, then the bourdon tube may have been stetched = beyond its electic limit by overheating, in which all bets are off on accur= acy. Barney Gaylord 1958 MGA with an attitude http://MGAguru.com At 05:04 PM 10/7/2018, Max Heim via Mgs wrote: >I just got the engine back together, but now the = >temperature gauge is malfunctioning. > >It seems to have got stuck at about 220. = >That=E2=80=99s what it was reading before I even tried = >to start the car. After warming up to operating = >temp (estimated, of course), the gauge had = >climbed into the oil pressure zone, reading at = >85 psi. At this point my cheap temp gun had the = >thermostat housing at around 180. > >Anyone seen this before? Any suggestions? >-- >Max Heim >'66 MGB >.... _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net From mgs-bounces@autox.team.net Sun Oct 7 19:35:48 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 4526E258886B for ; Sun, 7 Oct 2018 19:35:48 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from mail-ed1-f53.google.com (mail-ed1-f53.google.com [209.85.208.53]) by autox.team.net (Postfix) with ESMTP id 6ACBA258894A for ; Sun, 7 Oct 2018 19:07:04 -0600 (MDT) Received: by mail-ed1-f53.google.com with SMTP id z21-v6so11694627edb.11 for ; Sun, 07 Oct 2018 18:07:04 -0700 (PDT) h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=xfrXlrw7ofQ2AaP0LZ+ay1VEbn5D6CBtaZQ43QrqubI=; b=pm2+kx4+/P8PkDO/Ev/2Cv8wFpePAc8PTcQkR2pwQ70PakiyWkeLlEDItsZ0RmPRng bkI3/M76CiuYV/0YOAXX1cJ7AVF6drqBWub8GzWNodZy+2Asgthl4pFFuWYO+Ag/7Wqt xoqsc3mxXPp8YjrEoAJuVeRdrsRw7+7kujC3kG+VhLqA7MXv3uF+am8F0Wp+Iwdq5cSV m4J0ZcZ6fGoeQiN0tSXG680ylhGTHr/kHq7mCYL/LQRnoJZhGO+PINrMQmxDIZ5PWr6z C0VZR+POrKlhRrD+nHNjYpQCxQWYcdLQvONlQFfj+IcdcbDW16kIRx0GpW+O3/hRKN7C ossA== d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=xfrXlrw7ofQ2AaP0LZ+ay1VEbn5D6CBtaZQ43QrqubI=; b=hwrkCk7pQcU4KSAsn22jLGirHtipmhjRG8KO/XO3f+t77PMQ+icl4TXALSOW5tW8yu GB9aPz/gRSokirquACaXlM7P81L1gEyHgktxVorRCubWDBZomQSGSH4aAYVMO4tty2xQ /fV0am4i6EFY6wAzd5B8/fiQxSBHr+B2SfDh9TIFZl6v9qtF8te2Aw3D4jjKkTTHHxNx GoEyUqzp8tkjG2pJ6rElHVHemRpZAz1X+mSAUDNEl0Y4v7vPlVF7AGEuSI6yR+P3+IP2 HFK5KFNXX1hfZxWpK1AAHG6tw+dr2ztDvnXkMmGsbFZ18F1Bk3hIklc+3jDOZwBQodtA cR7A== pXvZjo/Lct7hP0prRhl5482SFf3hPl02eJuoshY= z6-v6mr21093973ejo.144.1538960818062; Sun, 07 Oct 2018 18:06:58 -0700 (PDT) References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> Date: Sun, 7 Oct 2018 18:06:46 -0700 To: Max Heim Cc: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: i erbs via Mgs Errors-To: mgs-bounces@autox.team.net --===============6114447783189068263== --000000000000e24b3d0577ad3c30 Content-Transfer-Encoding: quoted-printable check to see if the gauge needs cleaning. Gently remove the pointers and remove the gauge face. most likely the gears are gummy Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes 1967 MGB [image: MG] A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Sun, Oct 7, 2018 at 5:13 PM Max Heim via Mgs wrote: > How could the capsule get damaged? > > I unscrewed it from the head, and gently pulled the tube out of the way. > Then I replaced it after replacing the head. > > Unfortunately, it never occurred to me to see what the gauge was reading > while the head was off and the capsule was resting on the inner fender. > > I=E2=80=99m not sure what the test would demonstrate. I already know it r= esponds > to temperature changes, so the capillary tube is not broken. The problem > seems to be at the gauge end. I just can=E2=80=99t figure out what that w= ould be. > > I know there is a flattened tube rolled into a coil inside the gauge. > Could it have unrolled beyond its intended limit during the overheating > episode, and is now hung up on some protuberance inside the housing, > preventing it from recoiling? > > > -- > Max Heim > mvheim@sonic.net > > > > On Oct 7, 2018, at 3:49 PM, B H wrote: > > Yours has the non-electric temp sender and gauge? > If it does, the gauge is moved by pressure of expanding ether in the > little capsule that is screwed into the engine. If it reads 220 from the > beginning, my guess is that the capsule got squeezed or the tube damaged > during the R&R. > Test by removing capsule from engine, and putting it into a pan of hot > water. Check the temp with your hand-held thermometer. > Bob > > > On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs > wrote: > >> I just got the engine back together, but now the temperature gauge is >> malfunctioning. >> >> It seems to have got stuck at about 220. That=E2=80=99s what it was read= ing >> before I even tried to start the car. After warming up to operating temp >> (estimated, of course), the gauge had climbed into the oil pressure zone= , >> reading at 85 psi. At this point my cheap temp gun had the thermostat >> housing at around 180. >> >> Anyone seen this before? Any suggestions? >> >> >> -- >> Max Heim >> '66 MGB >> >> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs wrote= : >> >> Actually, when we finally got to my house, we swapped the luggage into m= y >> 1967 Barracuda convertible and headed up the freeway to catch up with th= e >> Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm. >> >> Not the first participants to have to pull in a backup vehicle=E2=80=A6 >> >> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the= radiator, actually. But >> it was trapped inside the shroud, and wound up smashing several tubes ri= ght >> where they enter the top and bottom tanks (the blade being caught on the >> lip of the tank at each revolution, I think). I didn't even know that it >> had thrown a blade until I started disassembly =E2=80=94 I was assuming = the 50+ >> year old radiator had just suddenly developed a stress crack after being >> transferred from one body to another. >> >> With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and >> the radiator shop said it was irreparable other than by completely recor= ing >> it. >> >> -- >> Max Heim >> '66 MGB >> >> On Sep 26, 2018, at 3:56 AM, Dan DiBiase wrote: >> >> A bummer that you couldn't participate in the melee, Max, I bet you were >> disappointed. Good recovery by Moss, though. >> >> Just tells you how fast these things spin, for a plastic blade to >> puncture a metal radiator! >> >> Dan D >> '76B, '65B >> Central NJ USA >> http://dandibiase.cbintouch.com/ >> >> >> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs >> wrote: >> >>> I haven=E2=80=99t said much on the list about my project. but I got my = =E2=80=9Cnew=E2=80=9D 66 >>> B roadster together in time for the start of the California Melee on Se= pt. >>> 8. Unfortunately, a blade flew off the new Moss plastic fan within the >>> first ten miles and punctured the radiator, so that was as far as it go= t =E2=80=94 >>> from the San Francisco Presidio to Marin Civic Center. >>> >>> I made the mistake of trying to get it to the next exit (it was a bad >>> place to be on the shoulder, between the sound wall and 5 lanes of traf= fic >>> doing 75+), which resulted in overheating and a blown head gasket. Tota= l >>> mileage to failure on this fan was 307 miles. >>> >>> Subsequent examination of the stub revealed an air pocket in the plasti= c >>> right at the center of the base of the blade. Moss accepted my photo of >>> this as evidence of a manufacturing flaw. This model of fan was already= out >>> of production (and out of warranty) =E2=80=94 I had purchased it as par= t of a large >>> order back in 2015 when the car body was still in the paint shop. >>> >>> But regardless, they decided to send me a new fan ("new model" nylon >>> 7-blade fan) and a new aluminum radiator (the shop had told me mine was >>> irreparable). I thought this was pretty decent of them. >>> >>> I just picked up my head at the machine shop where they had skimmed the >>> surface and cleaned up the valves. In the meantime I had inspected the >>> lifters based on a tip from Dave at British Motorsports in Campbell and >>> found a few of them were showing pitting. By replacing them now I can s= ave >>> the cam. >>> >>> Now I just need to pick up the lifters and the gasket set and I should >>> be able to have it back together this weekend. >>> >>> A few tips based on my experience: >>> >>> 1. Just shut it down. If I had stayed out on the freeway verge I would >>> have saved the head gasket, and AAA would have picked me up in a timely >>> manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D and off = the highway, it took >>> 4 hours to get a tow. >>> >>> 2. Check your lifters every so often. I had replaced the cam and lifter= s >>> due to lifter spalling sometime between 1998 and 2010. The new lifters = were >>> just starting to pit in 2018. >>> >>> 3. If you have a yellow plastic 7-bladed fan from Moss USA purchased >>> prior to mid-2015, you may want to consider retiring it. I suppose if i= t >>> hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air bubb= les in a critical >>> location. But they had perhaps a dozen reported incidents. The current >>> product being sold as part #434-332 is a different pattern by a differe= nt >>> maker in a different material, so should not be a cause for worry. >>> >>> Buy British, Buy Best! >>> >>> -- >>> Max Heim >>> '66 MGB >>> _______________________________________________ >>> >>> Mgs@autox.team.net >>> Donate: http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> >>> Archive: http://www.team.net/pipermail/mgs >>> >>> Unsubscribe: >>> http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com >>> >> >> _______________________________________________ >> >> Mgs@autox.team.net >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.75 >> >> Archive: http://www.team.net/pipermail/mgs >> >> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net >> >> >> _______________________________________________ >> >> Mgs@autox.team.net >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.75 >> >> Archive: http://www.team.net/pipermail/mgs >> >> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com > > > _______________________________________________ > > Mgs@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/mgs > > Unsubscribe: http://autox.team.net/mailman/options/mgs/eyera3000@gmail.co= m > --000000000000e24b3d0577ad3c30 Content-Transfer-Encoding: quoted-printable
check to see if the gauge needs cleaning. Gently remove th= e pointers and remove the gauge face. most likely the gears are gummy=C2=A0= =C2=A0
Ira Erbs
Portland,OR
=C2=A0 = =C2=A0 =C2=A0 _______ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0_______
=C2=A0 =C2=A0=C2=A0 (_____= _ \____1959 BN4____/ _______)
=C2=A0 =C2=A0 =C2=A0 =C2=A0=C2=A0 (_________________________)
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 BT7 engine and disk brakes
=


1967 MGB =C2=A03D"MG"
=
A racing car is an= animal with a thousand adjustments. Mario Andretti
Pl= ease excuse random auto corrects and misspelled words
<= /div>

On Sun, Oct = 7, 2018 at 5:13 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
How could the capsule get damaged?
I unscrewed it from the head, and gently pulled the tube o= ut of the way. Then I replaced it after replacing the head.

<= /div>
Unfortunately, it never occurred to me to see what the gauge was = reading while the head was off and the capsule was resting on the inner fen= der.

I=E2=80=99m not sure what the test would demo= nstrate. I already know it responds to temperature changes, so the capillar= y tube is not broken. The problem seems to be at the gauge end. I just can= =E2=80=99t figure out what that would be.

I know t= here is a flattened tube rolled into a coil inside the gauge. Could it have= unrolled beyond its intended limit during the overheating episode, and is = now hung up on some protuberance inside the housing, preventing it from rec= oiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <= ;mgbobh@gmail.com= > wrote:

=C2=A0 Yours has the non-electric temp sender and ga= uge?=C2=A0
=C2=A0 If it does, the gauge is moved by pressure of expand= ing ether in the little capsule that is screwed into the engine. If it read= s 220 from the beginning, my guess is that the capsule got squeezed or the = tube damaged during the R&R.
=C2=A0 Test by removing capsule = from engine, and putting it into a pan of hot water. Check the temp with yo= ur hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.= net> wrote:
I just got the engine back together, but now the temperature gauge is= malfunctioning.

It seems to have got stuck at about 220= . That=E2=80=99s what it was reading before I even tried to start the car. = After warming up to operating temp (estimated, of course), the gauge had cl= imbed into the oil pressure zone, reading at 85 psi. At this point my cheap= temp gun had the thermostat housing at around 180.

Anyone seen this before? Any suggestions?


--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net>= ; wrote:

Actually, wh= en we finally got to my house, we swapped the luggage into my 1967 Barracud= a convertible and headed up the freeway to catch up with the Melee. Reached= the first night=E2=80=99s stop in Red Bluff by 7pm.

Not= the first participants to have to pull in a backup vehicle=E2=80=A6
<= div>
The plastic blade didn=E2=80=99t directly =E2=80=9Cpunct= ure=E2=80=9D the radiator, actually. But it was trapped inside the shroud, = and wound up smashing several tubes right where they enter the top and bott= om tanks (the blade being caught on the lip of the tank at each revolution,= I think). I didn't even know that it had thrown a blade until I starte= d disassembly =E2=80=94 I was assuming the 50+ year old radiator had just s= uddenly developed a stress crack after being transferred from one body to a= nother.

With 5 or 6 tubes mangled top and bottom, = it lost coolant instantly, and the radiator shop said it was irreparable ot= her than by completely recoring it.

--
Max Heim
'66 MGB

On Sep 26, 2018= , at 3:56 AM, Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you couldn't participate in the melee, Max, I = bet you were disappointed. Good recovery by Moss, though.=C2=A0

Just tells you how fast these things spin, for a plastic blade to p= uncture a metal radiator!=C2=A0

Dan D
'76B= , '65B

On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrot= e:
I hav= en=E2=80=99t said much on the list about my project. but I got my =E2=80=9C= new=E2=80=9D 66 B roadster together in time for the start of the California= Melee on Sept. 8. Unfortunately, a blade flew off the new Moss plastic fan= within the first ten miles and punctured the radiator, so that was as far = as it got =E2=80=94 from the San Francisco Presidio to Marin Civic Center.= =C2=A0

I made the mistake of trying to get it to t= he next exit (it was a bad place to be on the shoulder, between the sound w= all and 5 lanes of traffic doing 75+), which resulted in overheating and a = blown head gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination of the stub revealed an air poc= ket in the plastic right at the center of the base of the blade. Moss accep= ted my photo of this as evidence of a manufacturing flaw. This model of fan= was already out of production (and out of warranty) =E2=80=94 I had purcha= sed it as part of a large order back in 2015 when the car body was still in= the paint shop.

But regardless, they decided to s= end me a new fan ("new model" nylon 7-blade fan) and a new alumin= um radiator (the shop had told me mine was irreparable). I thought this was= pretty decent of them.

I just picked up my head a= t the machine shop where they had skimmed the surface and cleaned up the va= lves. In the meantime I had inspected the lifters based on a tip from Dave = at British Motorsports in Campbell and found a few of them were showing pit= ting. By replacing them now I can save the cam.

No= w I just need to pick up the lifters and the gasket set and I should be abl= e to have it back together this weekend.

A few tip= s based on my experience:

1. Just shut it down. If= I had stayed out on the freeway verge I would have saved the head gasket, = and AAA would have picked me up in a timely manner. But since I had reporte= d myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to get= a tow.=C2=A0

2. Check your lifters every so often= . I had replaced the cam and lifters due to lifter spalling sometime betwee= n 1998 and 2010. The new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss USA pur= chased prior to mid-2015, you may want to consider retiring it. I suppose i= f it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air bub= bles in a critical location. But they had perhaps a dozen reported incident= s. The current product being sold as part #434-332 is a different pattern b= y a different maker in a different material, so should not be a cause for w= orry.

Buy British, Buy Best!

--
Max Heim
&#= 39;66 MGB
______________________________= _________________

Mgs@autox.team.net
Donate:=C2=A0http://www.team.net/donate.html
Suggested annual donation=C2=A0 $12.75

Archive:=C2=A0
http://www= .team.net/pipermail/mgs

Unsubscribe:=C2=A0http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com<= br>

____________= ___________________________________

Mgs@autox.team.net
Donate:=C2=A0http://www.team.net/donate.html
Suggested annual donation =C2=A0$12.75

Archive:=C2=A0
http://www.team.net/pipermail/= mgs

Unsubscribe:=C2=A0http://autox.team.net/mailman/options= /mgs/mvheim@sonic.net

_____= __________________________________________

Mgs@autox.team.net
Donate:=C2=A0http://w= ww.team.net/donate.html
Suggested annual donation=C2=A0 $12.75
Archive:=C2=A0= http://www.team.net/pipermail/mgs

Unsubscribe:=C2=A0http://autox.team.net/mailman/options/mgs/mgbobh= @gmail.com

_= ______________________________________________

Mgs@autox.team.net<= /a>
et=3D"_blank">http://www.team.net/donate.html


Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mail= man/options/mgs/eyera3000@gmail.com
--000000000000e24b3d0577ad3c30-- --===============6114447783189068263== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============6114447783189068263==-- From mgs-bounces@autox.team.net Sun Oct 7 20:44:29 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id CF2AE2580547 for ; Sun, 7 Oct 2018 20:44:29 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from c.mail.sonic.net (c.mail.sonic.net [64.142.111.80]) by autox.team.net (Postfix) with ESMTP id 9C15025889FE for ; Sun, 7 Oct 2018 19:43:42 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by c.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w981hYl9002658 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Sun, 7 Oct 2018 18:43:34 -0700 Date: Sun, 7 Oct 2018 18:43:33 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============4302896605858526189== boundary="Apple-Mail=_8C56DCA5-CD88-4EE4-94FE-256E68C2A060" --Apple-Mail=_8C56DCA5-CD88-4EE4-94FE-256E68C2A060 Content-Transfer-Encoding: quoted-printable charset=utf-8 That=E2=80=99s a possibility, I suppose, but it was professionally = rebuilt only a few years ago. And that was just because I broke the = capillary tube =E2=80=94 it was working fine. What I just did, based on some other responses, was pop off the bezel = and glass, pull the needle, and reset it to rest position. It=E2=80=99s getting dark, and it's parked behind my other car, so I = will wait until tomorrow to test it. Thanks for all the suggestions. -- Max Heim '66 MGB > On Oct 7, 2018, at 6:06 PM, i erbs =20 > check to see if the gauge needs cleaning. Gently remove the pointers = and remove the gauge face. most likely the gears are gummy =20 > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes >=20 >=20 > 1967 MGB =20 >=20 > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words >=20 >=20 > On Sun, Oct 7, 2018 at 5:13 PM Max Heim via Mgs How could the capsule get damaged? >=20 > I unscrewed it from the head, and gently pulled the tube out of the = way. Then I replaced it after replacing the head. >=20 > Unfortunately, it never occurred to me to see what the gauge was = reading while the head was off and the capsule was resting on the inner = fender. >=20 > I=E2=80=99m not sure what the test would demonstrate. I already know = it responds to temperature changes, so the capillary tube is not broken. = The problem seems to be at the gauge end. I just can=E2=80=99t figure = out what that would be. >=20 > I know there is a flattened tube rolled into a coil inside the gauge. = Could it have unrolled beyond its intended limit during the overheating = episode, and is now hung up on some protuberance inside the housing, = preventing it from recoiling? >=20 >=20 > -- > Max Heim >=20 >=20 >=20 >> On Oct 7, 2018, at 3:49 PM, B H >=20 >> Yours has the non-electric temp sender and gauge?=20 >> If it does, the gauge is moved by pressure of expanding ether in = the little capsule that is screwed into the engine. If it reads 220 from = the beginning, my guess is that the capsule got squeezed or the tube = damaged during the R&R. >> Test by removing capsule from engine, and putting it into a pan of = hot water. Check the temp with your hand-held thermometer. >> Bob >>=20 >>=20 >> On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs > I just got the engine back together, but now the temperature gauge is = malfunctioning. >>=20 >> It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. >>=20 >> Anyone seen this before? Any suggestions? >>=20 >>=20 >> -- >> Max Heim >> '66 MGB >>=20 >>> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs >>=20 >>> Actually, when we finally got to my house, we swapped the luggage = into my 1967 Barracuda convertible and headed up the freeway to catch up = with the Melee. Reached the first night=E2=80=99s stop in Red Bluff by = 7pm. >>>=20 >>> Not the first participants to have to pull in a backup vehicle=E2=80=A6= >>>=20 >>> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D = the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >>>=20 >>> With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, = and the radiator shop said it was irreparable other than by completely = recoring it. >>>=20 >>> -- >>> Max Heim >>> '66 MGB >>>=20 >>>> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >>>=20 >>>> A bummer that you couldn't participate in the melee, Max, I bet you = were disappointed. Good recovery by Moss, though.=20 >>>>=20 >>>> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>>>=20 >>>> Dan D >>>> '76B, '65B >>>> Central NJ USA >>>> http://dandibiase.cbintouch.com/ >>>>=20 >>>> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs = >>>> I haven=E2=80=99t said much on the list about my project. but I got = my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the start of = the California Melee on Sept. 8. Unfortunately, a blade flew off the new = Moss plastic fan within the first ten miles and punctured the radiator, = so that was as far as it got =E2=80=94 from the San Francisco Presidio = to Marin Civic Center.=20 >>>>=20 >>>> I made the mistake of trying to get it to the next exit (it was a = bad place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>>>=20 >>>> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>>>=20 >>>> But regardless, they decided to send me a new fan ("new model" = nylon 7-blade fan) and a new aluminum radiator (the shop had told me = mine was irreparable). I thought this was pretty decent of them. >>>>=20 >>>> I just picked up my head at the machine shop where they had skimmed = the surface and cleaned up the valves. In the meantime I had inspected = the lifters based on a tip from Dave at British Motorsports in Campbell = and found a few of them were showing pitting. By replacing them now I = can save the cam. >>>>=20 >>>> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>>>=20 >>>> A few tips based on my experience: >>>>=20 >>>> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>>>=20 >>>> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>>>=20 >>>> 3. If you have a yellow plastic 7-bladed fan from Moss USA = purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>>>=20 >>>> Buy British, Buy Best! >>>>=20 >>>> -- >>>> Max Heim >>>> '66 MGB >>>> _______________________________________________ >>>>=20 >>>> Donate: http://www.team.net/donate.html = >>>> Suggested annual donation $12.75 >>>>=20 >>>> Archive: http://www.team.net/pipermail/mgs = >>>>=20 >>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >>>=20 >>> _______________________________________________ >>>=20 >>> Donate: http://www.team.net/donate.html = >>> Suggested annual donation $12.75 >>>=20 >>> Archive: http://www.team.net/pipermail/mgs = >>>=20 >>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net = >>=20 >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html = >> Suggested annual donation $12.75 >>=20 >> Archive: http://www.team.net/pipermail/mgs = >>=20 >> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com = > _______________________________________________ >=20 > Donate: http://www.team.net/donate.html = > Suggested annual donation $12.75 >=20 > Archive: http://www.team.net/pipermail/mgs = >=20 > Unsubscribe: = http://autox.team.net/mailman/options/mgs/eyera3000@gmail.com = -- Max Heim mvheim@sonic.net --Apple-Mail=_8C56DCA5-CD88-4EE4-94FE-256E68C2A060 Content-Transfer-Encoding: quoted-printable charset=utf-8
That=E2=80=99s a possibility, I suppose, but it was = professionally rebuilt only a few years ago. And that was just because I = broke the capillary tube =E2=80=94 it was working fine.
What I just did, based on some other = responses, was pop off the bezel and glass, pull the needle, and reset = it to rest position.

It=E2=80=99s getting dark, and it's parked behind my other = car, so I will wait until tomorrow to test it.

Thanks for all the = suggestions.

--
Max Heim
'66 MGB

On Oct 7, 2018, at 6:06 PM, i erbs <eyera3000@gmail.com>= wrote:

check to see if the gauge needs cleaning. Gently remove the = pointers and remove the gauge face. most likely the gears are = gummy  
Ira Erbs
Portland,OR
  =     _______               =                   =  _______
     (______ \____1959 BN4____/ = _______)
         = (_________________________)
    =       BT7 engine and disk brakes


1967= MGB  3D"MG"

A racing car is an animal with a thousand adjustments. Mario = Andretti
Please excuse random = auto corrects and misspelled = words


On Sun, Oct 7, 2018 at 5:13 PM Max Heim via Mgs <mgs@autox.team.net> = wrote:
How = could the capsule get damaged?

I unscrewed it from the head, and gently pulled the tube out = of the way. Then I replaced it after replacing the head.

Unfortunately, it never = occurred to me to see what the gauge was reading while the head was off = and the capsule was resting on the inner fender.

I=E2=80=99m not sure what the test = would demonstrate. I already know it responds to temperature changes, so = the capillary tube is not broken. The problem seems to be at the gauge = end. I just can=E2=80=99t figure out what that would be.

I know there is a = flattened tube rolled into a coil inside the gauge. Could it have = unrolled beyond its intended limit during the overheating episode, and = is now hung up on some protuberance inside the housing, preventing it = from recoiling?



On Oct 7, 2018, at 3:49 PM, B H <mgbobh@gmail.com> wrote:

  Yours has the non-electric = temp sender and gauge? 
  If it does, the gauge is = moved by pressure of expanding ether in the little capsule that is = screwed into the engine. If it reads 220 from the beginning, my guess is = that the capsule got squeezed or the tube damaged during the = R&R.
  Test by removing capsule = from engine, and putting it into a pan of hot water. Check the temp with = your hand-held thermometer.
Bob


On Sun, Oct 7, = 2018 at 6:30 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I just got the engine back = together, but now the temperature gauge is malfunctioning.

It seems to have got = stuck at about 220. That=E2=80=99s what it was reading before I even = tried to start the car. After warming up to operating temp (estimated, = of course), the gauge had climbed into the oil pressure zone, reading at = 85 psi. At this point my cheap temp gun had the thermostat housing at = around 180.

Anyone seen this before? Any suggestions?


--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net> wrote:

Actually, when we finally got to my house, we swapped the = luggage into my 1967 Barracuda convertible and headed up the freeway to = catch up with the Melee. Reached the first night=E2=80=99s stop in Red = Bluff by 7pm.

Not = the first participants to have to pull in a backup vehicle=E2=80=A6
<= div class=3D"">
The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 3:56 AM, = Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you = couldn't participate in the melee, Max, I bet you were disappointed. = Good recovery by Moss, though. 

Just tells you how fast these things = spin, for a plastic blade to puncture a metal radiator! 

Dan D
'76B, '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99= t said much on the list about my project. but I got my =E2=80=9Cnew=E2=80=9D= 66 B roadster together in time for the start of the California Melee on = Sept. 8. Unfortunately, a blade flew off the new Moss plastic fan within = the first ten miles and punctured the radiator, so that was as far as it = got =E2=80=94 from the San Francisco Presidio to Marin Civic = Center. 

I = made the mistake of trying to get it to the next exit (it was a bad = place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination = of the stub revealed an air pocket in the plastic right at the center of = the base of the blade. Moss accepted my photo of this as evidence of a = manufacturing flaw. This model of fan was already out of production (and = out of warranty) =E2=80=94 I had purchased it as part of a large order = back in 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max Heim
'66 = MGB
___________________________________= ____________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested = annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net<= br class=3D"">

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com<= /blockquote>

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/eyera3000@gmail.com





= --Apple-Mail=_8C56DCA5-CD88-4EE4-94FE-256E68C2A060-- --===============4302896605858526189== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============4302896605858526189==-- From mgs-bounces@autox.team.net Mon Oct 8 05:34:37 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id A28E02587788 for ; Mon, 8 Oct 2018 05:34:37 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from mail-oi1-f182.google.com (mail-oi1-f182.google.com [209.85.167.182]) by autox.team.net (Postfix) with ESMTP id 6E5A62588272 for ; Mon, 8 Oct 2018 05:00:01 -0600 (MDT) Received: by mail-oi1-f182.google.com with SMTP id j68-v6so15414029oib.7 for ; Mon, 08 Oct 2018 04:00:01 -0700 (PDT) h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=qbeZ8uTZ1rd0F/sugd6i9PC6NIAK3L6t0NU0u3PZWKs=; b=OBHAlfctfdsM2GWg00YIe04duK9HZj6H8q2pfbbVbhFeQmhXtqsNkhRc0QWqRk5ufu CZs2pXQBbTI7hiBKJH41dB3qvJcs42S3xRlc0UEBhf/c4ESYJJs7no6Y1dLwp+Gjr/41 vAppYm5rI0pq6b4rZjYYTZYDvwqM5iGMz5RHFo8NUM8WroliSxQCjLUrbGypB0XmRPOe 6EVm7UsWSSXJnqjFZXSuoSCxSfDHxvMWi2WVhjaCHJK+GLbui9V5n7OzBw4kgNzvgi1c eufuA5+G02gSACA60tXfGK0KR2r6+og7dYuaIjh0bmACry2RYVWMRqjskGaw2A3LF5Pg SObg== d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=qbeZ8uTZ1rd0F/sugd6i9PC6NIAK3L6t0NU0u3PZWKs=; b=sf5RoelTKiNR/ngqd+J004knmMiAxgPWYBnbWAmZ/7QZ27Sp4OZtBH05gkpAQOcgt2 rTZuSk0xJ17SEy0Gg+lZ2ErWLtsFNJhzvEJ3XAUGDYho49llJhs/XJzNcjMAQi0sFP/k 0QvFgj2ntf3OltJWM/GgVX1esa5ZU8UmgWfK5daq8URqKQ1R6KSYtuyDRn40CVzFUMcn mjnAlpbCVto+EyCngnFnkHWqJ/nDjIO6N1BB92lobigPj9FL5BD0xCRqPXDLfOj3UUXO IIqPG8XhOYzoWLnPBPDoGJ28Ssje1nS1C0GF/DvK9NYBa9ds27isLrJxTgIaugHW142C XQPw== 1wHBWSTHTKrsYnh1t/WsHsSx4ml6xG1R0yIvEZg= d196-v6mr5056279oib.142.1538996400611; Mon, 08 Oct 2018 04:00:00 -0700 (PDT) References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> Date: Mon, 8 Oct 2018 06:59:24 -0400 To: mvheim@sonic.net Cc: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Dan DiBiase via Mgs Errors-To: mgs-bounces@autox.team.net --===============7878529568524708055== --000000000000c4e5c50577b5859f Content-Transfer-Encoding: quoted-printable Youse said - I=E2=80=99ve only had the car running for two weeks all year= =E2=80=A6 kind of running out of nice weather=E2=80=A6 Wait, don't you live in California where it is nice all year round?! (Other than fires) ;-) Dan D '76B, '65B Central NJ USA http://dandibiase.cbintouch.com/ On Sun, Oct 7, 2018 at 8:24 PM Max Heim via Mgs wrote: > Here=E2=80=99s what Joey at MoMa Instrument Repair had to suggest: > > "It means that the movement itself is deformed that is why it=E2=80=99= s way out > of calibration. Some of those we can repair by reshaping the movement > carefully or just replace the movement. It=E2=80=99s not an easy fix at a= ll. You > can send it and it will all depend on the extent of the damage if we can > repair or replace movement. Thanks Joey" > > =E2=80=A6which sounds kind of like what I was suggesting. Damn. The probl= em is, > the car is undriveable with the gauge removed =E2=80=94 it leaves an open= passage > to both coolant and oil. I=E2=80=99ve only had the car running for two we= eks all > year=E2=80=A6 kind of running out of nice weather=E2=80=A6 Grr. > > I think I may try to buy a good one to swap in while having this one > repaired, then sell one later. > > -- > Max Heim > '66 MGB > > On Oct 7, 2018, at 4:38 PM, Max Heim wrote: > > How could the capsule get damaged? > > I unscrewed it from the head, and gently pulled the tube out of the way. > Then I replaced it after replacing the head. > > Unfortunately, it never occurred to me to see what the gauge was reading > while the head was off and the capsule was resting on the inner fender. > > I=E2=80=99m not sure what the test would demonstrate. I already know it r= esponds > to temperature changes, so the capillary tube is not broken. The problem > seems to be at the gauge end. I just can=E2=80=99t figure out what that w= ould be. > > I know there is a flattened tube rolled into a coil inside the gauge. > Could it have unrolled beyond its intended limit during the overheating > episode, and is now hung up on some protuberance inside the housing, > preventing it from recoiling? > > > -- > Max Heim > mvheim@sonic.net > > > > On Oct 7, 2018, at 3:49 PM, B H wrote: > > Yours has the non-electric temp sender and gauge? > If it does, the gauge is moved by pressure of expanding ether in the > little capsule that is screwed into the engine. If it reads 220 from the > beginning, my guess is that the capsule got squeezed or the tube damaged > during the R&R. > Test by removing capsule from engine, and putting it into a pan of hot > water. Check the temp with your hand-held thermometer. > Bob > > > On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs > wrote: > >> I just got the engine back together, but now the temperature gauge is >> malfunctioning. >> >> It seems to have got stuck at about 220. That=E2=80=99s what it was read= ing >> before I even tried to start the car. After warming up to operating temp >> (estimated, of course), the gauge had climbed into the oil pressure zone= , >> reading at 85 psi. At this point my cheap temp gun had the thermostat >> housing at around 180. >> >> Anyone seen this before? Any suggestions? >> >> >> -- >> Max Heim >> '66 MGB >> >> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs wrote= : >> >> Actually, when we finally got to my house, we swapped the luggage into m= y >> 1967 Barracuda convertible and headed up the freeway to catch up with th= e >> Melee. Reached the first night=E2=80=99s stop in Red Bluff by 7pm. >> >> Not the first participants to have to pull in a backup vehicle=E2=80=A6 >> >> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the= radiator, actually. But >> it was trapped inside the shroud, and wound up smashing several tubes ri= ght >> where they enter the top and bottom tanks (the blade being caught on the >> lip of the tank at each revolution, I think). I didn't even know that it >> had thrown a blade until I started disassembly =E2=80=94 I was assuming = the 50+ >> year old radiator had just suddenly developed a stress crack after being >> transferred from one body to another. >> >> With 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and >> the radiator shop said it was irreparable other than by completely recor= ing >> it. >> >> -- >> Max Heim >> '66 MGB >> >> On Sep 26, 2018, at 3:56 AM, Dan DiBiase wrote: >> >> A bummer that you couldn't participate in the melee, Max, I bet you were >> disappointed. Good recovery by Moss, though. >> >> Just tells you how fast these things spin, for a plastic blade to >> puncture a metal radiator! >> >> Dan D >> '76B, '65B >> Central NJ USA >> http://dandibiase.cbintouch.com/ >> >> >> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs >> wrote: >> >>> I haven=E2=80=99t said much on the list about my project. but I got my = =E2=80=9Cnew=E2=80=9D 66 >>> B roadster together in time for the start of the California Melee on Se= pt. >>> 8. Unfortunately, a blade flew off the new Moss plastic fan within the >>> first ten miles and punctured the radiator, so that was as far as it go= t =E2=80=94 >>> from the San Francisco Presidio to Marin Civic Center. >>> >>> I made the mistake of trying to get it to the next exit (it was a bad >>> place to be on the shoulder, between the sound wall and 5 lanes of traf= fic >>> doing 75+), which resulted in overheating and a blown head gasket. Tota= l >>> mileage to failure on this fan was 307 miles. >>> >>> Subsequent examination of the stub revealed an air pocket in the plasti= c >>> right at the center of the base of the blade. Moss accepted my photo of >>> this as evidence of a manufacturing flaw. This model of fan was already= out >>> of production (and out of warranty) =E2=80=94 I had purchased it as par= t of a large >>> order back in 2015 when the car body was still in the paint shop. >>> >>> But regardless, they decided to send me a new fan ("new model" nylon >>> 7-blade fan) and a new aluminum radiator (the shop had told me mine was >>> irreparable). I thought this was pretty decent of them. >>> >>> I just picked up my head at the machine shop where they had skimmed the >>> surface and cleaned up the valves. In the meantime I had inspected the >>> lifters based on a tip from Dave at British Motorsports in Campbell and >>> found a few of them were showing pitting. By replacing them now I can s= ave >>> the cam. >>> >>> Now I just need to pick up the lifters and the gasket set and I should >>> be able to have it back together this weekend. >>> >>> A few tips based on my experience: >>> >>> 1. Just shut it down. If I had stayed out on the freeway verge I would >>> have saved the head gasket, and AAA would have picked me up in a timely >>> manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D and off = the highway, it took >>> 4 hours to get a tow. >>> >>> 2. Check your lifters every so often. I had replaced the cam and lifter= s >>> due to lifter spalling sometime between 1998 and 2010. The new lifters = were >>> just starting to pit in 2018. >>> >>> 3. If you have a yellow plastic 7-bladed fan from Moss USA purchased >>> prior to mid-2015, you may want to consider retiring it. I suppose if i= t >>> hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air bubb= les in a critical >>> location. But they had perhaps a dozen reported incidents. The current >>> product being sold as part #434-332 is a different pattern by a differe= nt >>> maker in a different material, so should not be a cause for worry. >>> >>> Buy British, Buy Best! >>> >>> -- >>> Max Heim >>> '66 MGB >>> _______________________________________________ >>> >>> Mgs@autox.team.net >>> Donate: http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> >>> Archive: http://www.team.net/pipermail/mgs >>> >>> Unsubscribe: >>> http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com >>> >> >> _______________________________________________ >> >> Mgs@autox.team.net >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.75 >> >> Archive: http://www.team.net/pipermail/mgs >> >> Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net >> >> >> _______________________________________________ >> >> Mgs@autox.team.net >> Donate: http://www.team.net/donate.html >> Suggested annual donation $12.75 >> >> Archive: http://www.team.net/pipermail/mgs >> >> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com > > > > _______________________________________________ > > Mgs@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/mgs > > Unsubscribe: > http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com > --000000000000c4e5c50577b5859f Content-Transfer-Encoding: quoted-printable
Youse said -=C2=A0 I=E2=80=99ve only had the car running for two weeks all year=E2=80=A6 kind = of running out of nice weather=E2=80=A6=C2=A0

Wait, don&= #39;t you live in California where it is nice all year round?! (Other than = fires)=C2=A0 ;-)

Dan D
'76B, '65= B

On Sun, Oct 7, 2018 at 8:24 PM Max Heim via = Mgs <mgs@autox.team.net> wr= ote:
Here=E2=80=99s what Joey at MoMa Instrument Repair had to suggest:
=C2=A0 =C2=A0"It means that the movement itself is de= formed that is why it=E2=80=99s way out of calibration. Some of those we ca= n repair by reshaping the movement carefully or just replace the movement. = It=E2=80=99s not an easy fix at all. You can send it and it will all depend= on the extent of the damage if we can repair or replace movement. Thanks J= oey"

=E2=80=A6which sounds kind of like what = I was suggesting. Damn. The problem is, the car is undriveable with the gau= ge removed =E2=80=94 it leaves an open passage to both coolant and oil. I= =E2=80=99ve only had the car running for two weeks all year=E2=80=A6 kind o= f running out of nice weather=E2=80=A6 Grr.

I thin= k I may try to buy a good one to swap in while having this one repaired, th= en sell one later.

--
Max Heim
'66 MGB

On Oct 7, 2018, at 4:38 PM, Max Hei= m <mvheim@sonic.ne= t> wrote:

How could the capsule get= damaged?

I unscrewed it from the head, and gently pulle= d the tube out of the way. Then I replaced it after replacing the head.

Unfortunately, it never occurred to me to see what th= e gauge was reading while the head was off and the capsule was resting on t= he inner fender.

I=E2=80=99m not sure what the tes= t would demonstrate. I already know it responds to temperature changes, so = the capillary tube is not broken. The problem seems to be at the gauge end.= I just can=E2=80=99t figure out what that would be.

I know there is a flattened tube rolled into a coil inside the gauge. Co= uld it have unrolled beyond its intended limit during the overheating episo= de, and is now hung up on some protuberance inside the housing, preventing = it from recoiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <= ;mgbobh@gmail.com= > wrote:

=C2=A0 Yours has the non-electric temp sender and g= auge?=C2=A0
=C2=A0 If it does, the gauge is moved by pressure of expa= nding ether in the little capsule that is screwed into the engine. If it re= ads 220 from the beginning, my guess is that the capsule got squeezed or th= e tube damaged during the R&R.
=C2=A0 Test by removing capsul= e from engine, and putting it into a pan of hot water. Check the temp with = your hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.= net> wrote:
I just got the engine back together, but now the temperature gauge is= malfunctioning.

It seems to have got stuck at about 220= . That=E2=80=99s what it was reading before I even tried to start the car. = After warming up to operating temp (estimated, of course), the gauge had cl= imbed into the oil pressure zone, reading at 85 psi. At this point my cheap= temp gun had the thermostat housing at around 180.

Anyone seen this before? Any suggestions?


--
Max Heim
'66 MGB

On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs <mgs@autox.team.net>= ; wrote:

Actually, w= hen we finally got to my house, we swapped the luggage into my 1967 Barracu= da convertible and headed up the freeway to catch up with the Melee. Reache= d the first night=E2=80=99s stop in Red Bluff by 7pm.

No= t the first participants to have to pull in a backup vehicle=E2=80=A6
=

The plastic blade didn=E2=80=99t directly =E2=80=9Cpunc= ture=E2=80=9D the radiator, actually. But it was trapped inside the shroud,= and wound up smashing several tubes right where they enter the top and bot= tom tanks (the blade being caught on the lip of the tank at each revolution= , I think). I didn't even know that it had thrown a blade until I start= ed disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body to = another.

With 5 or 6 tubes mangled top and bottom,= it lost coolant instantly, and the radiator shop said it was irreparable o= ther than by completely recoring it.

--
Max Heim
'66 MGB

On Sep 26, 201= 8, at 3:56 AM, Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you couldn't participate in the melee, Max, = I bet you were disappointed. Good recovery by Moss, though.=C2=A0

<= /div>
Just tells you how fast these things spin, for a plastic blade to= puncture a metal radiator!=C2=A0

Dan D
'7= 6B, '65B

On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wr= ote:
I h= aven=E2=80=99t said much on the list about my project. but I got my =E2=80= =9Cnew=E2=80=9D 66 B roadster together in time for the start of the Califor= nia Melee on Sept. 8. Unfortunately, a blade flew off the new Moss plastic = fan within the first ten miles and punctured the radiator, so that was as f= ar as it got =E2=80=94 from the San Francisco Presidio to Marin Civic Cente= r.=C2=A0

I made the mistake of trying to get it to= the next exit (it was a bad place to be on the shoulder, between the sound= wall and 5 lanes of traffic doing 75+), which resulted in overheating and = a blown head gasket. Total mileage to failure on this fan was 307 miles.

Subsequent examination of the stub revealed an air p= ocket in the plastic right at the center of the base of the blade. Moss acc= epted my photo of this as evidence of a manufacturing flaw. This model of f= an was already out of production (and out of warranty) =E2=80=94 I had purc= hased it as part of a large order back in 2015 when the car body was still = in the paint shop.

But regardless, they decided to= send me a new fan ("new model" nylon 7-blade fan) and a new alum= inum radiator (the shop had told me mine was irreparable). I thought this w= as pretty decent of them.

I just picked up my head= at the machine shop where they had skimmed the surface and cleaned up the = valves. In the meantime I had inspected the lifters based on a tip from Dav= e at British Motorsports in Campbell and found a few of them were showing p= itting. By replacing them now I can save the cam.

= Now I just need to pick up the lifters and the gasket set and I should be a= ble to have it back together this weekend.

A few t= ips based on my experience:

1. Just shut it down. = If I had stayed out on the freeway verge I would have saved the head gasket= , and AAA would have picked me up in a timely manner. But since I had repor= ted myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to g= et a tow.=C2=A0

2. Check your lifters every so oft= en. I had replaced the cam and lifters due to lifter spalling sometime betw= een 1998 and 2010. The new lifters were just starting to pit in 2018.
=

3. If you have a yellow plastic 7-bladed fan from Moss USA p= urchased prior to mid-2015, you may want to consider retiring it. I suppose= if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t have air b= ubbles in a critical location. But they had perhaps a dozen reported incide= nts. The current product being sold as part #434-332 is a different pattern= by a different maker in a different material, so should not be a cause for= worry.

Buy British, Buy Best!

--
Max Heim
'66 MGB
___________________________= ____________________

Mgs@autox.team.net
Donate:=C2=A0http://www.team.net/donate.ht= ml
Suggested annual donation=C2=A0 $12.75

Archive:=C2=A0http:= //www.team.net/pipermail/mgs

Unsubscribe:=C2=A0http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.co= m

______= _________________________________________

Mgs@autox.team.net
Donate:=C2=A0http://www.team.net/donate= .html
Suggested annual donation =C2=A0$12.75

Archive:=C2=A0http://www.team.net/p= ipermail/mgs

Unsubscribe:=C2=A0http://autox.team.net/mailm= an/options/mgs/mvheim@sonic.net

<= /div>_______________________________________________

Mgs@autox.team.net
Donate:<= span class=3D"m_-1158636474461823897Apple-converted-space">=C2=A0http://www.team.net/donate.html
Suggested annual donation=C2=A0 $= 12.75

Archive:=C2=A0http://www.team.net/pipermail/mgs

Uns= ubscribe:=C2=A0= http://autox.team.net/mailman/optio= ns/mgs/mgbobh@gmail.com

=

______________________= _________________________

Mgs@autox.team.net<= /a>
et=3D"_blank">http://www.team.net/donate.html


Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/ma= ilman/options/mgs/dan.dibiase@gmail.com
--000000000000c4e5c50577b5859f-- --===============7878529568524708055== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============7878529568524708055==-- From mgs-bounces@autox.team.net Mon Oct 8 16:50:34 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id DF0FB2588BC4 for ; Mon, 8 Oct 2018 16:50:34 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from d.mail.sonic.net (d.mail.sonic.net [64.142.111.50]) by autox.team.net (Postfix) with ESMTP id 6738F2588628 for ; Mon, 8 Oct 2018 14:27:09 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by d.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w98KQtCs009785 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Mon, 8 Oct 2018 13:26:55 -0700 Date: Mon, 8 Oct 2018 13:26:54 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============7178446116334075995== boundary="Apple-Mail=_09882F93-0F85-41A8-8DA2-404308799F3B" --Apple-Mail=_09882F93-0F85-41A8-8DA2-404308799F3B Content-Transfer-Encoding: quoted-printable charset=utf-8 I=E2=80=99m in NorCal. We have a rainy season (usually), lasting from = November to April. I usually put the hardtop on at the first heavy rain, = and leave it on through March, depending on the state of drought. Anyway, I just took the car for a short spin to get it warmed up. When I = judged it was at operating temperature, the needle had stalled at about = 150=C2=BA. The IR gun read the thermostat housing temp at 180=C2=BA = (makes sense =E2=80=94 it's a 180=C2=BA thermostat) and the upper = radiator temp at 177=C2=BA, so I pulled the glass off the gauge and = reset the needle to 180. I=E2=80=99m guessing that the motor wasn=E2=80=99= t fully cooled down yesterday afternoon when I set the needle at the = rest point. I=E2=80=99ll check it in a few hours and see what it has gone down to. Someone suggested the needle had slipped. That seems to match most of = the observed facts, but it=E2=80=99s hard to see how that might have = occurred, given that the needle was attached firmly when I went to reset = it. I am theorizing that when the temperature exceeded the intended = travel, the coil slipped a gear tooth, which is why I have had to move = the needle to correct the range of travel. Anyway, this approach seems = very promising so far. For now, I am leaving the gauge half out of the dash. so I can easily = remove the bezel. -- Max Heim '66 MGB > On Oct 8, 2018, at 3:59 AM, Dan DiBiase wrote: >=20 > Youse said - I=E2=80=99ve only had the car running for two weeks all = year=E2=80=A6 kind of running out of nice weather=E2=80=A6=20 >=20 > Wait, don't you live in California where it is nice all year round?! = (Other than fires) ;-) >=20 > Dan D > '76B, '65B > Central NJ USA=20 > http://dandibiase.cbintouch.com/ >=20 > On Sun, Oct 7, 2018 at 8:24 PM Max Heim via Mgs Here=E2=80=99s what Joey at MoMa Instrument Repair had to suggest: >=20 > "It means that the movement itself is deformed that is why it=E2=80=99= s way out of calibration. Some of those we can repair by reshaping the = movement carefully or just replace the movement. It=E2=80=99s not an = easy fix at all. You can send it and it will all depend on the extent of = the damage if we can repair or replace movement. Thanks Joey" >=20 > =E2=80=A6which sounds kind of like what I was suggesting. Damn. The = problem is, the car is undriveable with the gauge removed =E2=80=94 it = leaves an open passage to both coolant and oil. I=E2=80=99ve only had = the car running for two weeks all year=E2=80=A6 kind of running out of = nice weather=E2=80=A6 Grr. >=20 > I think I may try to buy a good one to swap in while having this one = repaired, then sell one later. >=20 > -- > Max Heim > '66 MGB >=20 >> On Oct 7, 2018, at 4:38 PM, Max Heim >=20 >> How could the capsule get damaged? >>=20 >> I unscrewed it from the head, and gently pulled the tube out of the = way. Then I replaced it after replacing the head. >>=20 >> Unfortunately, it never occurred to me to see what the gauge was = reading while the head was off and the capsule was resting on the inner = fender. >>=20 >> I=E2=80=99m not sure what the test would demonstrate. I already know = it responds to temperature changes, so the capillary tube is not broken. = The problem seems to be at the gauge end. I just can=E2=80=99t figure = out what that would be. >>=20 >> I know there is a flattened tube rolled into a coil inside the gauge. = Could it have unrolled beyond its intended limit during the overheating = episode, and is now hung up on some protuberance inside the housing, = preventing it from recoiling? >>=20 >>=20 >> -- >> Max Heim >>=20 >>=20 >>=20 >>> On Oct 7, 2018, at 3:49 PM, B H >>=20 >>> Yours has the non-electric temp sender and gauge?=20 >>> If it does, the gauge is moved by pressure of expanding ether in = the little capsule that is screwed into the engine. If it reads 220 from = the beginning, my guess is that the capsule got squeezed or the tube = damaged during the R&R. >>> Test by removing capsule from engine, and putting it into a pan of = hot water. Check the temp with your hand-held thermometer. >>> Bob >>>=20 >>>=20 >>> On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs >> I just got the engine back together, but now the temperature gauge = is malfunctioning. >>>=20 >>> It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. >>>=20 >>> Anyone seen this before? Any suggestions? >>>=20 >>>=20 >>> -- >>> Max Heim >>> '66 MGB >>>=20 >>>> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs >>>=20 >>>> Actually, when we finally got to my house, we swapped the luggage = into my 1967 Barracuda convertible and headed up the freeway to catch up = with the Melee. Reached the first night=E2=80=99s stop in Red Bluff by = 7pm. >>>>=20 >>>> Not the first participants to have to pull in a backup vehicle=E2=80=A6= >>>>=20 >>>> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D = the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >>>>=20 >>>> With 5 or 6 tubes mangled top and bottom, it lost coolant = instantly, and the radiator shop said it was irreparable other than by = completely recoring it. >>>>=20 >>>> -- >>>> Max Heim >>>> '66 MGB >>>>=20 >>>>> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >>>>=20 >>>>> A bummer that you couldn't participate in the melee, Max, I bet = you were disappointed. Good recovery by Moss, though.=20 >>>>>=20 >>>>> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>>>>=20 >>>>> Dan D >>>>> '76B, '65B >>>>> Central NJ USA >>>>> http://dandibiase.cbintouch.com/ = >>>>>=20 >>>>> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs = >>>>> I haven=E2=80=99t said much on the list about my project. but I = got my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the = start of the California Melee on Sept. 8. Unfortunately, a blade flew = off the new Moss plastic fan within the first ten miles and punctured = the radiator, so that was as far as it got =E2=80=94 from the San = Francisco Presidio to Marin Civic Center.=20 >>>>>=20 >>>>> I made the mistake of trying to get it to the next exit (it was a = bad place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>>>>=20 >>>>> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>>>>=20 >>>>> But regardless, they decided to send me a new fan ("new model" = nylon 7-blade fan) and a new aluminum radiator (the shop had told me = mine was irreparable). I thought this was pretty decent of them. >>>>>=20 >>>>> I just picked up my head at the machine shop where they had = skimmed the surface and cleaned up the valves. In the meantime I had = inspected the lifters based on a tip from Dave at British Motorsports in = Campbell and found a few of them were showing pitting. By replacing them = now I can save the cam. >>>>>=20 >>>>> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>>>>=20 >>>>> A few tips based on my experience: >>>>>=20 >>>>> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>>>>=20 >>>>> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>>>>=20 >>>>> 3. If you have a yellow plastic 7-bladed fan from Moss USA = purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>>>>=20 >>>>> Buy British, Buy Best! >>>>>=20 >>>>> -- >>>>> Max Heim >>>>> '66 MGB >>>>> _______________________________________________ >>>>>=20 >>>>> Donate: http://www.team.net/donate.html = >>>>> Suggested annual donation $12.75 >>>>>=20 >>>>> Archive: http://www.team.net/pipermail/mgs = >>>>>=20 >>>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >>>>=20 >>>> _______________________________________________ >>>>=20 >>>> Donate: http://www.team.net/donate.html = >>>> Suggested annual donation $12.75 >>>>=20 >>>> Archive: http://www.team.net/pipermail/mgs = >>>>=20 >>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net = >>>=20 >>> _______________________________________________ >>>=20 >>> Donate: http://www.team.net/donate.html = >>> Suggested annual donation $12.75 >>>=20 >>> Archive: http://www.team.net/pipermail/mgs = >>>=20 >>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com = >=20 > _______________________________________________ >=20 > Donate: http://www.team.net/donate.html = > Suggested annual donation $12.75 >=20 > Archive: http://www.team.net/pipermail/mgs = >=20 > Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = --Apple-Mail=_09882F93-0F85-41A8-8DA2-404308799F3B Content-Transfer-Encoding: quoted-printable charset=utf-8 I=E2=80=99m in NorCal. We have a rainy season (usually), = lasting from November to April. I usually put the hardtop on at the = first heavy rain, and leave it on through March, depending on the state = of drought.

Anyway, = I just took the car for a short spin to get it warmed up. When I judged = it was at operating temperature, the needle had stalled at about 150=C2=BA= . The IR gun read the thermostat housing temp at 180=C2=BA (makes sense = =E2=80=94 it's a 180=C2=BA thermostat) and the upper radiator temp at = 177=C2=BA, so I pulled the glass off the gauge and reset the needle to = 180. I=E2=80=99m guessing that the motor wasn=E2=80=99t fully cooled = down yesterday afternoon when I set the needle at the rest = point.

I=E2=80=99= ll check it in a few hours and see what it has gone down to.

Someone suggested the = needle had slipped. That seems to match most of the observed facts, but = it=E2=80=99s hard to see how that might have occurred, given that the = needle was attached firmly when I went to reset it. I am theorizing that = when the temperature exceeded the intended travel, the coil slipped a = gear tooth, which is why I have had to move the needle to correct the = range of travel. Anyway, this approach seems very promising so = far.

For now, = I am leaving the gauge half out of the dash. so I can easily remove the = bezel.

--
Max Heim
'66 MGB

On Oct 8, 2018, at 3:59 AM, Dan DiBiase <dan.dibiase@gmail.com> wrote:

Youse said -  I=E2=80=99ve only had the car running for two weeks all year=E2=80=A6 = kind of running out of nice weather=E2=80=A6 

Wait, don't you live in California = where it is nice all year round?! (Other than fires)  ;-)

Dan D
'76B, '65B

On Sun, Oct 7, 2018 at 8:24 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
Here=E2=80=99s what Joey at = MoMa Instrument Repair had to suggest:

   "It means that the = movement itself is deformed that is why it=E2=80=99s way out of = calibration. Some of those we can repair by reshaping the movement = carefully or just replace the movement. It=E2=80=99s not an easy fix at = all. You can send it and it will all depend on the extent of the damage = if we can repair or replace movement. Thanks Joey"

=E2=80=A6which sounds = kind of like what I was suggesting. Damn. The problem is, the car is = undriveable with the gauge removed =E2=80=94 it leaves an open passage = to both coolant and oil. I=E2=80=99ve only had the car running for two = weeks all year=E2=80=A6 kind of running out of nice weather=E2=80=A6 = Grr.

I think I = may try to buy a good one to swap in while having this one repaired, = then sell one later.

--
Max = Heim
'66 = MGB

On Oct 7, 2018, at 4:38 PM, Max Heim <mvheim@sonic.net> wrote:

How could the = capsule get damaged?

I= unscrewed it from the head, and gently pulled the tube out of the way. = Then I replaced it after replacing the head.

Unfortunately, it never occurred to me = to see what the gauge was reading while the head was off and the capsule = was resting on the inner fender.

I=E2=80=99m not sure what the test = would demonstrate. I already know it responds to temperature changes, so = the capillary tube is not broken. The problem seems to be at the gauge = end. I just can=E2=80=99t figure out what that would be.

I know there is a = flattened tube rolled into a coil inside the gauge. Could it have = unrolled beyond its intended limit during the overheating episode, and = is now hung up on some protuberance inside the housing, preventing it = from recoiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <mgbobh@gmail.com> wrote:

  Yours has the non-electric temp sender = and gauge? 
  If it does, the gauge is moved = by pressure of expanding ether in the little capsule that is screwed = into the engine. If it reads 220 from the beginning, my guess is that = the capsule got squeezed or the tube damaged during the = R&R.
  Test by removing capsule from = engine, and putting it into a pan of hot water. Check the temp with your = hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
I just got the engine back together, but now the temperature = gauge is malfunctioning.

It seems to have got stuck at about 220. That=E2=80=99s what = it was reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180.

Anyone seen this before? Any = suggestions?

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 9:11 AM, = Max Heim via Mgs <mgs@autox.team.net> wrote:

Actually, when we finally got to my house, we swapped the = luggage into my 1967 Barracuda convertible and headed up the freeway to = catch up with the Melee. Reached the first night=E2=80=99s stop in Red = Bluff by 7pm.

Not = the first participants to have to pull in a backup vehicle=E2=80=A6
<= div class=3D"">
The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 3:56 AM, = Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you = couldn't participate in the melee, Max, I bet you were disappointed. = Good recovery by Moss, though. 

Just tells you how fast these things = spin, for a plastic blade to puncture a metal radiator! 

Dan D
'76B, '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99t said much on the list about = my project. but I got my =E2=80=9Cnew=E2=80=9D 66 B roadster together in = time for the start of the California Melee on Sept. 8. Unfortunately, a = blade flew off the new Moss plastic fan within the first ten miles and = punctured the radiator, so that was as far as it got =E2=80=94 from the = San Francisco Presidio to Marin Civic Center. 

I made the mistake of = trying to get it to the next exit (it was a bad place to be on the = shoulder, between the sound wall and 5 lanes of traffic doing 75+), = which resulted in overheating and a blown head gasket. Total mileage to = failure on this fan was 307 miles.

Subsequent examination of the stub = revealed an air pocket in the plastic right at the center of the base of = the blade. Moss accepted my photo of this as evidence of a manufacturing = flaw. This model of fan was already out of production (and out of = warranty) =E2=80=94 I had purchased it as part of a large order back in = 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max = Heim
'66 = MGB
___________________________________= ____________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested = annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net<= br class=3D"">

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com<= /blockquote>


_______________________________________________

Mgs@autox.team.net
target=3D"_blank" class=3D"">http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

= --Apple-Mail=_09882F93-0F85-41A8-8DA2-404308799F3B-- --===============7178446116334075995== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============7178446116334075995==-- From mgs-bounces@autox.team.net Mon Oct 8 18:43:48 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id EA21D2588C62 for ; Mon, 8 Oct 2018 18:43:47 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from d.mail.sonic.net (d.mail.sonic.net [64.142.111.50]) by autox.team.net (Postfix) with ESMTP id C8B8E2588B1F for ; Mon, 8 Oct 2018 16:16:14 -0600 (MDT) Received: from [192.168.1.65] (172-5-155-8.lightspeed.sntcca.sbcglobal.net [172.5.155.8]) (authenticated bits=0) by d.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w98MGBOB012158 (version=TLSv1.2 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NOT) for ; Mon, 8 Oct 2018 15:16:11 -0700 Date: Mon, 8 Oct 2018 15:16:10 -0700 References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> To: mglist Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: Max Heim via Mgs Errors-To: mgs-bounces@autox.team.net --===============1274165327976107943== boundary="Apple-Mail=_078C7228-918F-413A-B862-C4E9C5594CDF" --Apple-Mail=_078C7228-918F-413A-B862-C4E9C5594CDF Content-Transfer-Encoding: quoted-printable charset=utf-8 Hmmmm=E2=80=A6 2 hours later, the rad temp is down to 94=C2=BA, and the cylinder head = is at 108=C2=BA, but the gauge is still reading 150=C2=BA. So it would seem that the range of motion of the gauge has been = compromised. This is probably not acceptable. While the only temperature that needs to be indicated with any degree of = precision is Standard Operating Temperature (180=C2=BA), I feel I need = to know that the needle is actually capable of moving significantly from = this position. So I think this guy is coming out. -- Max Heim '66 MGB > On Oct 8, 2018, at 1:26 PM, Max Heim wrote: >=20 > I=E2=80=99m in NorCal. We have a rainy season (usually), lasting from = November to April. I usually put the hardtop on at the first heavy rain, = and leave it on through March, depending on the state of drought. >=20 > Anyway, I just took the car for a short spin to get it warmed up. When = I judged it was at operating temperature, the needle had stalled at = about 150=C2=BA. The IR gun read the thermostat housing temp at 180=C2=BA = (makes sense =E2=80=94 it's a 180=C2=BA thermostat) and the upper = radiator temp at 177=C2=BA, so I pulled the glass off the gauge and = reset the needle to 180. I=E2=80=99m guessing that the motor wasn=E2=80=99= t fully cooled down yesterday afternoon when I set the needle at the = rest point. >=20 > I=E2=80=99ll check it in a few hours and see what it has gone down to. >=20 > Someone suggested the needle had slipped. That seems to match most of = the observed facts, but it=E2=80=99s hard to see how that might have = occurred, given that the needle was attached firmly when I went to reset = it. I am theorizing that when the temperature exceeded the intended = travel, the coil slipped a gear tooth, which is why I have had to move = the needle to correct the range of travel. Anyway, this approach seems = very promising so far. >=20 > For now, I am leaving the gauge half out of the dash. so I can easily = remove the bezel. >=20 > -- > Max Heim > '66 MGB >=20 >> On Oct 8, 2018, at 3:59 AM, Dan DiBiase >=20 >> Youse said - I=E2=80=99ve only had the car running for two weeks all = year=E2=80=A6 kind of running out of nice weather=E2=80=A6=20 >>=20 >> Wait, don't you live in California where it is nice all year round?! = (Other than fires) ;-) >>=20 >> Dan D >> '76B, '65B >> Central NJ USA=20 >> http://dandibiase.cbintouch.com/ >>=20 >> On Sun, Oct 7, 2018 at 8:24 PM Max Heim via Mgs > Here=E2=80=99s what Joey at MoMa Instrument Repair had to suggest: >>=20 >> "It means that the movement itself is deformed that is why it=E2=80=99= s way out of calibration. Some of those we can repair by reshaping the = movement carefully or just replace the movement. It=E2=80=99s not an = easy fix at all. You can send it and it will all depend on the extent of = the damage if we can repair or replace movement. Thanks Joey" >>=20 >> =E2=80=A6which sounds kind of like what I was suggesting. Damn. The = problem is, the car is undriveable with the gauge removed =E2=80=94 it = leaves an open passage to both coolant and oil. I=E2=80=99ve only had = the car running for two weeks all year=E2=80=A6 kind of running out of = nice weather=E2=80=A6 Grr. >>=20 >> I think I may try to buy a good one to swap in while having this one = repaired, then sell one later. >>=20 >> -- >> Max Heim >> '66 MGB >>=20 >>> On Oct 7, 2018, at 4:38 PM, Max Heim >>=20 >>> How could the capsule get damaged? >>>=20 >>> I unscrewed it from the head, and gently pulled the tube out of the = way. Then I replaced it after replacing the head. >>>=20 >>> Unfortunately, it never occurred to me to see what the gauge was = reading while the head was off and the capsule was resting on the inner = fender. >>>=20 >>> I=E2=80=99m not sure what the test would demonstrate. I already know = it responds to temperature changes, so the capillary tube is not broken. = The problem seems to be at the gauge end. I just can=E2=80=99t figure = out what that would be. >>>=20 >>> I know there is a flattened tube rolled into a coil inside the = gauge. Could it have unrolled beyond its intended limit during the = overheating episode, and is now hung up on some protuberance inside the = housing, preventing it from recoiling? >>>=20 >>>=20 >>> -- >>> Max Heim >>>=20 >>>=20 >>>=20 >>>> On Oct 7, 2018, at 3:49 PM, B H >>>=20 >>>> Yours has the non-electric temp sender and gauge?=20 >>>> If it does, the gauge is moved by pressure of expanding ether in = the little capsule that is screwed into the engine. If it reads 220 from = the beginning, my guess is that the capsule got squeezed or the tube = damaged during the R&R. >>>> Test by removing capsule from engine, and putting it into a pan = of hot water. Check the temp with your hand-held thermometer. >>>> Bob >>>>=20 >>>>=20 >>>> On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs >>> I just got the engine back together, but now the temperature gauge = is malfunctioning. >>>>=20 >>>> It seems to have got stuck at about 220. That=E2=80=99s what it was = reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180. >>>>=20 >>>> Anyone seen this before? Any suggestions? >>>>=20 >>>>=20 >>>> -- >>>> Max Heim >>>> '66 MGB >>>>=20 >>>>> On Sep 26, 2018, at 9:11 AM, Max Heim via Mgs >>>>=20 >>>>> Actually, when we finally got to my house, we swapped the luggage = into my 1967 Barracuda convertible and headed up the freeway to catch up = with the Melee. Reached the first night=E2=80=99s stop in Red Bluff by = 7pm. >>>>>=20 >>>>> Not the first participants to have to pull in a backup vehicle=E2=80= =A6 >>>>>=20 >>>>> The plastic blade didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D= the radiator, actually. But it was trapped inside the shroud, and wound = up smashing several tubes right where they enter the top and bottom = tanks (the blade being caught on the lip of the tank at each revolution, = I think). I didn't even know that it had thrown a blade until I started = disassembly =E2=80=94 I was assuming the 50+ year old radiator had just = suddenly developed a stress crack after being transferred from one body = to another. >>>>>=20 >>>>> With 5 or 6 tubes mangled top and bottom, it lost coolant = instantly, and the radiator shop said it was irreparable other than by = completely recoring it. >>>>>=20 >>>>> -- >>>>> Max Heim >>>>> '66 MGB >>>>>=20 >>>>>> On Sep 26, 2018, at 3:56 AM, Dan DiBiase >>>>>=20 >>>>>> A bummer that you couldn't participate in the melee, Max, I bet = you were disappointed. Good recovery by Moss, though.=20 >>>>>>=20 >>>>>> Just tells you how fast these things spin, for a plastic blade to = puncture a metal radiator!=20 >>>>>>=20 >>>>>> Dan D >>>>>> '76B, '65B >>>>>> Central NJ USA >>>>>> http://dandibiase.cbintouch.com/ = >>>>>>=20 >>>>>> On Tue, Sep 25, 2018 at 11:36 PM Max Heim via Mgs = >>>>>> I haven=E2=80=99t said much on the list about my project. but I = got my =E2=80=9Cnew=E2=80=9D 66 B roadster together in time for the = start of the California Melee on Sept. 8. Unfortunately, a blade flew = off the new Moss plastic fan within the first ten miles and punctured = the radiator, so that was as far as it got =E2=80=94 from the San = Francisco Presidio to Marin Civic Center.=20 >>>>>>=20 >>>>>> I made the mistake of trying to get it to the next exit (it was a = bad place to be on the shoulder, between the sound wall and 5 lanes of = traffic doing 75+), which resulted in overheating and a blown head = gasket. Total mileage to failure on this fan was 307 miles. >>>>>>=20 >>>>>> Subsequent examination of the stub revealed an air pocket in the = plastic right at the center of the base of the blade. Moss accepted my = photo of this as evidence of a manufacturing flaw. This model of fan was = already out of production (and out of warranty) =E2=80=94 I had = purchased it as part of a large order back in 2015 when the car body was = still in the paint shop. >>>>>>=20 >>>>>> But regardless, they decided to send me a new fan ("new model" = nylon 7-blade fan) and a new aluminum radiator (the shop had told me = mine was irreparable). I thought this was pretty decent of them. >>>>>>=20 >>>>>> I just picked up my head at the machine shop where they had = skimmed the surface and cleaned up the valves. In the meantime I had = inspected the lifters based on a tip from Dave at British Motorsports in = Campbell and found a few of them were showing pitting. By replacing them = now I can save the cam. >>>>>>=20 >>>>>> Now I just need to pick up the lifters and the gasket set and I = should be able to have it back together this weekend. >>>>>>=20 >>>>>> A few tips based on my experience: >>>>>>=20 >>>>>> 1. Just shut it down. If I had stayed out on the freeway verge I = would have saved the head gasket, and AAA would have picked me up in a = timely manner. But since I had reported myself =E2=80=9Csafe=E2=80=9D = and off the highway, it took 4 hours to get a tow.=20 >>>>>>=20 >>>>>> 2. Check your lifters every so often. I had replaced the cam and = lifters due to lifter spalling sometime between 1998 and 2010. The new = lifters were just starting to pit in 2018. >>>>>>=20 >>>>>> 3. If you have a yellow plastic 7-bladed fan from Moss USA = purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry. >>>>>>=20 >>>>>> Buy British, Buy Best! >>>>>>=20 >>>>>> -- >>>>>> Max Heim >>>>>> '66 MGB >>>>>> _______________________________________________ >>>>>>=20 >>>>>> Donate: http://www.team.net/donate.html = >>>>>> Suggested annual donation $12.75 >>>>>>=20 >>>>>> Archive: http://www.team.net/pipermail/mgs = >>>>>>=20 >>>>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >>>>>=20 >>>>> _______________________________________________ >>>>>=20 >>>>> Donate: http://www.team.net/donate.html = >>>>> Suggested annual donation $12.75 >>>>>=20 >>>>> Archive: http://www.team.net/pipermail/mgs = >>>>>=20 >>>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mvheim@sonic.net = >>>>=20 >>>> _______________________________________________ >>>>=20 >>>> Donate: http://www.team.net/donate.html = >>>> Suggested annual donation $12.75 >>>>=20 >>>> Archive: http://www.team.net/pipermail/mgs = >>>>=20 >>>> Unsubscribe: = http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com = >>=20 >> _______________________________________________ >>=20 >> Donate: http://www.team.net/donate.html = >> Suggested annual donation $12.75 >>=20 >> Archive: http://www.team.net/pipermail/mgs = >>=20 >> Unsubscribe: = http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com = >=20 --Apple-Mail=_078C7228-918F-413A-B862-C4E9C5594CDF Content-Transfer-Encoding: quoted-printable charset=utf-8 Hmmmm=E2=80=A6

2 hours later, the rad temp is down to 94=C2=BA, and the = cylinder head is at 108=C2=BA, but the gauge is still reading = 150=C2=BA.

So = it would seem that the range of motion of the gauge has been = compromised. This is probably not acceptable.

While the only temperature that needs = to be indicated with any degree of precision is Standard Operating = Temperature (180=C2=BA), I feel I need to know that the needle is = actually capable of moving significantly from this position. So I think = this guy is coming out.


--
Max Heim
'66 MGB

On Oct 8, 2018, at 1:26 PM, Max Heim <mvheim@sonic.net> = wrote:

I=E2=80=99m in = NorCal. We have a rainy season (usually), lasting from November to = April. I usually put the hardtop on at the first heavy rain, and leave = it on through March, depending on the state of drought.
Anyway, I just took the car for a = short spin to get it warmed up. When I judged it was at operating = temperature, the needle had stalled at about 150=C2=BA. The IR gun read = the thermostat housing temp at 180=C2=BA (makes sense =E2=80=94 it's a = 180=C2=BA thermostat) and the upper radiator temp at 177=C2=BA, so I = pulled the glass off the gauge and reset the needle to 180. I=E2=80=99m = guessing that the motor wasn=E2=80=99t fully cooled down yesterday = afternoon when I set the needle at the rest point.

I=E2=80=99ll check it in = a few hours and see what it has gone down to.

Someone suggested the needle had = slipped. That seems to match most of the observed facts, but it=E2=80=99s = hard to see how that might have occurred, given that the needle was = attached firmly when I went to reset it. I am theorizing that when the = temperature exceeded the intended travel, the coil slipped a gear tooth, = which is why I have had to move the needle to correct the range of = travel. Anyway, this approach seems very promising so far.

For now, I am leaving = the gauge half out of the dash. so I can easily remove the = bezel.

--
Max Heim
'66 MGB

On Oct 8, 2018, at 3:59 AM, Dan DiBiase <dan.dibiase@gmail.com> wrote:

Youse said -  I=E2=80=99ve only had the car running for two weeks all year=E2=80=A6 = kind of running out of nice weather=E2=80=A6 

Wait, don't you live in California = where it is nice all year round?! (Other than fires)  ;-)

Dan D
'76B, '65B

On Sun, Oct 7, 2018 at 8:24 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
Here=E2=80=99s what Joey at = MoMa Instrument Repair had to suggest:

   "It means that the = movement itself is deformed that is why it=E2=80=99s way out of = calibration. Some of those we can repair by reshaping the movement = carefully or just replace the movement. It=E2=80=99s not an easy fix at = all. You can send it and it will all depend on the extent of the damage = if we can repair or replace movement. Thanks Joey"

=E2=80=A6which sounds = kind of like what I was suggesting. Damn. The problem is, the car is = undriveable with the gauge removed =E2=80=94 it leaves an open passage = to both coolant and oil. I=E2=80=99ve only had the car running for two = weeks all year=E2=80=A6 kind of running out of nice weather=E2=80=A6 = Grr.

I think I = may try to buy a good one to swap in while having this one repaired, = then sell one later.

--
Max = Heim
'66 = MGB

On Oct 7, 2018, at 4:38 PM, Max Heim <mvheim@sonic.net> wrote:

How could the = capsule get damaged?

I= unscrewed it from the head, and gently pulled the tube out of the way. = Then I replaced it after replacing the head.

Unfortunately, it never occurred to me = to see what the gauge was reading while the head was off and the capsule = was resting on the inner fender.

I=E2=80=99m not sure what the test = would demonstrate. I already know it responds to temperature changes, so = the capillary tube is not broken. The problem seems to be at the gauge = end. I just can=E2=80=99t figure out what that would be.

I know there is a = flattened tube rolled into a coil inside the gauge. Could it have = unrolled beyond its intended limit during the overheating episode, and = is now hung up on some protuberance inside the housing, preventing it = from recoiling?


--
Max Heim



On Oct 7, 2018, at 3:49 PM, B H <mgbobh@gmail.com> wrote:

  Yours has the non-electric temp sender = and gauge? 
  If it does, the gauge is moved = by pressure of expanding ether in the little capsule that is screwed = into the engine. If it reads 220 from the beginning, my guess is that = the capsule got squeezed or the tube damaged during the = R&R.
  Test by removing capsule from = engine, and putting it into a pan of hot water. Check the temp with your = hand-held thermometer.
Bob


On Sun, Oct 7, 2018 at 6:30 PM Max Heim via Mgs = <mgs@autox.team.net> wrote:
I just got the engine back together, but now the temperature = gauge is malfunctioning.

It seems to have got stuck at about 220. That=E2=80=99s what = it was reading before I even tried to start the car. After warming up to = operating temp (estimated, of course), the gauge had climbed into the = oil pressure zone, reading at 85 psi. At this point my cheap temp gun = had the thermostat housing at around 180.

Anyone seen this before? Any = suggestions?

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 9:11 AM, = Max Heim via Mgs <mgs@autox.team.net> wrote:

Actually, when we finally got to my house, we swapped the = luggage into my 1967 Barracuda convertible and headed up the freeway to = catch up with the Melee. Reached the first night=E2=80=99s stop in Red = Bluff by 7pm.

Not = the first participants to have to pull in a backup vehicle=E2=80=A6
<= div class=3D"">
The plastic blade = didn=E2=80=99t directly =E2=80=9Cpuncture=E2=80=9D the radiator, = actually. But it was trapped inside the shroud, and wound up smashing = several tubes right where they enter the top and bottom tanks (the blade = being caught on the lip of the tank at each revolution, I think). I = didn't even know that it had thrown a blade until I started disassembly = =E2=80=94 I was assuming the 50+ year old radiator had just suddenly = developed a stress crack after being transferred from one body to = another.

With = 5 or 6 tubes mangled top and bottom, it lost coolant instantly, and the = radiator shop said it was irreparable other than by completely recoring = it.

--
Max = Heim
'66 = MGB

On Sep 26, 2018, at 3:56 AM, = Dan DiBiase <dan.dibiase@gmail.com> wrote:

A bummer that you = couldn't participate in the melee, Max, I bet you were disappointed. = Good recovery by Moss, though. 

Just tells you how fast these things = spin, for a plastic blade to puncture a metal radiator! 

Dan D
'76B, '65B

On Tue, Sep 25, 2018 = at 11:36 PM Max Heim via Mgs <mgs@autox.team.net> wrote:
I haven=E2=80=99t said much on the list about = my project. but I got my =E2=80=9Cnew=E2=80=9D 66 B roadster together in = time for the start of the California Melee on Sept. 8. Unfortunately, a = blade flew off the new Moss plastic fan within the first ten miles and = punctured the radiator, so that was as far as it got =E2=80=94 from the = San Francisco Presidio to Marin Civic Center. 

I made the mistake of = trying to get it to the next exit (it was a bad place to be on the = shoulder, between the sound wall and 5 lanes of traffic doing 75+), = which resulted in overheating and a blown head gasket. Total mileage to = failure on this fan was 307 miles.

Subsequent examination of the stub = revealed an air pocket in the plastic right at the center of the base of = the blade. Moss accepted my photo of this as evidence of a manufacturing = flaw. This model of fan was already out of production (and out of = warranty) =E2=80=94 I had purchased it as part of a large order back in = 2015 when the car body was still in the paint shop.

But regardless, they = decided to send me a new fan ("new model" nylon 7-blade fan) and a new = aluminum radiator (the shop had told me mine was irreparable). I thought = this was pretty decent of them.

I just picked up my head at the machine = shop where they had skimmed the surface and cleaned up the valves. In = the meantime I had inspected the lifters based on a tip from Dave at = British Motorsports in Campbell and found a few of them were showing = pitting. By replacing them now I can save the cam.

Now I just need to pick = up the lifters and the gasket set and I should be able to have it back = together this weekend.

A few tips based on my experience:

1. Just shut it down. If I had stayed = out on the freeway verge I would have saved the head gasket, and AAA = would have picked me up in a timely manner. But since I had reported = myself =E2=80=9Csafe=E2=80=9D and off the highway, it took 4 hours to = get a tow. 

2. Check your lifters every so often. I had replaced the cam = and lifters due to lifter spalling sometime between 1998 and 2010. The = new lifters were just starting to pit in 2018.

3. If you have a yellow plastic 7-bladed fan from Moss = USA purchased prior to mid-2015, you may want to consider retiring it. I = suppose if it hasn=E2=80=99t broken so far, it probably doesn=E2=80=99t = have air bubbles in a critical location. But they had perhaps a dozen = reported incidents. The current product being sold as part #434-332 is a = different pattern by a different maker in a different material, so = should not be a cause for worry.

Buy British, Buy Best!

--
Max = Heim
'66 = MGB
___________________________________= ____________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested = annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mvheim@sonic.net<= br class=3D"">

_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com<= /blockquote>


_______________________________________________

Mgs@autox.team.net
target=3D"_blank" class=3D"">http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com=


= --Apple-Mail=_078C7228-918F-413A-B862-C4E9C5594CDF-- --===============1274165327976107943== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============1274165327976107943==-- From mgs-bounces@autox.team.net Tue Oct 9 02:15:30 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id D8C202588F98 for ; Tue, 9 Oct 2018 02:15:30 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from know-smtprelay-omc-11.server.virginmedia.net (know-smtprelay-omc-11.server.virginmedia.net [80.0.253.75]) by autox.team.net (Postfix) with ESMTP id 570602588EA2 for ; Tue, 9 Oct 2018 01:44:11 -0600 (MDT) Received: from paul ([92.239.15.247]) by cmsmtp with ESMTPA id 9mgbgmGJDRWce9mgbgfurF; Tue, 09 Oct 2018 08:44:09 +0100 a=ibFpEyFn6mAKt5BSRHG3fg==:17 a=x7bEGLp0ZPQA:10 a=r77TgQKjGQsHNAKrUKIA:9 a=bhkQ7jjJ27_t1Nvh0zQA:9 a=QEXdDO2ut3YA:10 a=lij6VR0LPDDJ6J8Ag4sA:9 a=lxUEhMEiVe5kSHg7:21 a=_W_S_7VecoQA:10 s=meg.feb2017; t=1539071049; bh=tv+nm4V2GNAzeOf+GgdLF/Ng5Jujx8esbx4FnvM1mfY=; h=From:To:References:Subject:Date; b=OMcVtjwv/Bbym9bRkr7fI743axa2sPzZI4ciuf+9XOrr0tUKmDyqTokTUDx5qI+Om IwF1SrEL873Xtsia3u35HGWvHES4dJ0jYMuajhc7pBdQY/TBbN3z+dLUqXvLGThU1Z JCEBpqkbxVVKLZXH7uZ7deJJ3eZ1hzHEN/UttZxc3zvMlz2yuBCFFyXjSWKej91FWf tO3qjKO8bOtVw/pBL8ORXCVmC0m3mEu5m0qnbWgH9a4JA1aU1F3Slk3iaXtOqW9MIu Wo9bKZHTQLarV77QBOESu9gCs7Uxb7oiSJKzFs2KpL35tSIJsGNbYKjMkLa/EpaGsR pqerqcdcv2kbw== To: "Max Heim" , "mglist" References: <18d170e5-53bc-ecf6-b8bc-674093a8f7ad@twc.com> <789BD631-D530-405D-8D48-B921D98313AD@sonic.net> <8C08C079-7906-407A-BBCA-B3A5420F9E1F@sonic.net> <9A061859-CF9B-429F-8322-0630993B13FC@sonic.net> <4E21CA0C-32C0-4254-A77F-38FB1B34013D@sonic.net> Date: Tue, 9 Oct 2018 08:20:44 +0100 x6zUz1mRRUL7l6bDZfYIgDIIP6lkjw96cmnUFh9hZ+cZsyetJW7vOwITJSYc/kbRxi1juzMeNFgC6g== Subject: Re: [Mgs] A short tale of parts & service [Postscript] From: PaulHunt73 via Mgs Errors-To: mgs-bounces@autox.team.net This is a multi-part message in MIME format. --===============0897877289573858096== boundary="----=_NextPart_000_002F_01D45FA8.F9655860" This is a multi-part message in MIME format. ------=_NextPart_000_002F_01D45FA8.F9655860 charset="utf-8" Content-Transfer-Encoding: quoted-printable Advisable, given there is obviously a problem somewhere with it you = don't want it stalling at 190 when the temp has got up to 220. PaulH. ----- Original Message -----=20 While the only temperature that needs to be indicated with any degree = of precision is Standard Operating Temperature (180=C2=BA), I feel I = need to know that the needle is actually capable of moving significantly = from this position. So I think this guy is coming out. ------=_NextPart_000_002F_01D45FA8.F9655860 charset="utf-8" Content-Transfer-Encoding: quoted-printable =EF=BB=BF
Advisable, given there is obviously a problem=20 somewhere with it you don't want it stalling at 190 when the temp = has got=20 up to 220.
 
PaulH.
----- Original Message -----

While the only temperature that needs to be indicated with any = degree of=20 precision is Standard Operating Temperature (180=C2=BA), I feel I need = to know that=20 the needle is actually capable of moving significantly from this = position. So=20 I think this guy is coming out.
------=_NextPart_000_002F_01D45FA8.F9655860-- --===============0897877289573858096== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============0897877289573858096==-- From mgs-bounces@autox.team.net Tue Oct 9 10:50:58 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 3B7C82588E93 for ; Tue, 9 Oct 2018 10:50:58 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from smtp.southslope.net (smtp.southslope.net [216.51.139.10]) by autox.team.net (Postfix) with ESMTP id F1ED72588E12 for ; Tue, 9 Oct 2018 09:29:09 -0600 (MDT) Received: from rileyPC (151.78.126.208.dyn.southslope.net [208.126.78.151]) (Authenticated sender: riverside@southslope.net) by smtp.southslope.net (Postfix) with ESMTPA id 582C941BC0 for ; Tue, 9 Oct 2018 10:28:59 -0500 (CDT) To: Date: Tue, 9 Oct 2018 10:28:57 -0500 Importance: Normal Subject: [Mgs] Fw: Hot B motor From: Ron Sanborn via Mgs Errors-To: mgs-bounces@autox.team.net This is a multi-part message in MIME format. --===============2690788537352815389== boundary="----=_NextPart_000_003F_01D45FBA.E2ECC2F0" This is a multi-part message in MIME format. ------=_NextPart_000_003F_01D45FBA.E2ECC2F0 charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable From: riverside@southslope.net=20 Sent: Monday, October 08, 2018 4:12 PM Subject: Hot B motor I am helping a friend build an MGB motor for autoXssing and track days. We are looking for sources of high performance parts and guidance. Any advice or knowledge you can share would be most welcome. Thanks! Ron Sanborn ------=_NextPart_000_003F_01D45FBA.E2ECC2F0 charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
 
Sent: Monday, October 08, 2018 4:12 PM
Subject: Hot B motor
 
I am helping a friend build an MGB motor for
autoXssing and track days.  We are looking for
sources of high performance parts and guidance.
Any advice or knowledge you can share would be
most welcome.
 
Thanks!
 
Ron Sanborn
------=_NextPart_000_003F_01D45FBA.E2ECC2F0-- --===============2690788537352815389== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============2690788537352815389==-- From mgs-bounces@autox.team.net Tue Oct 9 17:12:40 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id B84282588BC7 for ; Tue, 9 Oct 2018 17:12:40 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from sonic313-41.consmr.mail.bf2.yahoo.com (sonic313-41.consmr.mail.bf2.yahoo.com [74.6.133.215]) by autox.team.net (Postfix) with ESMTP id BB4E925884B9 for ; Tue, 9 Oct 2018 13:24:57 -0600 (MDT) t=1539113077; bh=BmvEsuFkNy5XitiYJrKgfvGKOOX+axXKuep/Dghvzpg=; h=Date:From:To:In-Reply-To:References:Subject:From:Subject; b=kht+GbVWhlM4w2cZTOBbOzuP43tgdl/e8jfsegnykQKZAI3wXXeu8Z1MniPZQknBiMUvTHu2m+KLAV2uhdnzm+E6AzoDCP2tfht60fiwSQ4MVMhWlVXszjjypngZ6i1ZM0lAxFXMUWZNNjfEcGWlpLzPlu9vDwP3PQmdVZHU1gWpHymoi0wIrDm699VKyweb+j9TlRDjf0OhnqYAAYBs4wN3nZoB5xu0TXMhxWQgyfUEwcY7AjR/w8sSCFMj4UWAxO+a2J/U2eY18DF8Ofj0xGKeXrt32e8rcYiQrviKROyK7mD5luIFIOcldnwrXpL65wHn6bZsiYSvbB69wMstLw== Received: from sonic.gate.mail.ne1.yahoo.com by sonic313.consmr.mail.bf2.yahoo.com with HTTP; Tue, 9 Oct 2018 19:24:37 +0000 Date: Tue, 9 Oct 2018 19:20:33 +0000 (UTC) To: Mglist References: Darwin/17.7.0 Subject: Re: [Mgs] Fw: Hot B motor From: Zach Dorsch via Mgs Errors-To: mgs-bounces@autox.team.net --===============1826635231501397531== boundary="----=_Part_7127493_742694567.1539112833312" ------=_Part_7127493_742694567.1539112833312 Content-Transfer-Encoding: quoted-printable To name a few: Hap Waldrop=C2=A0http://www.acmespeedshop.com/=C2=A0 Peter Burgesshttp://www.mg-cars.org.uk/peterburgess/indexstart.html=C2=A0 Dave Headleyhttp://www.fast-mg.com/=C2=A0 On Tuesday, October 9, 2018, 11:28 AM, Ron Sanborn via Mgs wrote: =C2=A0=C2=A0From: riverside@southslope.net Sent: Monday, October 08, 2018 4= :12 PMSubject: Hot B motor=C2=A0I am helping a friend build an MGB motor fo= rautoXssing and track days.=C2=A0 We are looking forsources of high perform= ance parts and guidance.Any advice or knowledge you can share would bemost = welcome.=C2=A0Thanks!=C2=A0Ron Sanborn_____________________________________= __________ Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/herr_dorsch@yahoo.co= m ------=_Part_7127493_742694567.1539112833312 Content-Transfer-Encoding: quoted-printable To name a few:

Hap Waldrop 
http://www.acmespeedshop.com/&= nbsp;


Peter Burgess

Dave Headley
http://www.fast-mg.com/&= nbsp;

On Tues= day, October 9, 2018, 11:28 AM, Ron Sanborn via Mgs <mgs@autox.team.net&= gt; wrote:

 
 
Sent: Monday, October 08, 2018 4:12 PM
Subject: Hot B motor
 
I am helping a friend build an MGB motor for
autoXssing and track days.  We are looking for
sources of high performance parts and guidance.
Any advice or knowledge you can share would be
most welcome.
 
Thanks!
 
Ron Sanborn
___________= ____________________________________


Donate: http://www.team.net/donate.html<= /a>
Suggested annual donation  $12.75

Archive:
http://www.team.net/pipe= rmail/mgs

Unsubscribe: http://autox.team.net/= mailman/options/mgs/herr_dorsch@yahoo.com
<= /blockquote>
------=_Part_7127493_742694567.1539112833312-- --===============1826635231501397531== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============1826635231501397531==-- From mgs-bounces@autox.team.net Tue Oct 9 20:48:27 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 38902258906F for ; Tue, 9 Oct 2018 20:48:27 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from mail-vs1-f48.google.com (mail-vs1-f48.google.com [209.85.217.48]) by autox.team.net (Postfix) with ESMTP id 7FC402588BD7 for ; Tue, 9 Oct 2018 15:26:26 -0600 (MDT) Received: by mail-vs1-f48.google.com with SMTP id w1so3031980vsj.8 for ; Tue, 09 Oct 2018 14:26:26 -0700 (PDT) h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=xE8WVVMDnRtovPC1V9dBM9HAx+vhRps+Dzxh1qhnGuM=; b=Nt2od8mjbynDhf5bNH/S6OxWU7HzIK7GBGpOaz3vMKrYBBm7k1Q2O5ZjtpQeU/YKxK +R748RPtgzMPAIL2q1AUHtnhT2qhaE8XCFKk5e5cGJFMp1DtDFT9FiPXZRq/y7C3riAk D+M1DwOzgX+Gz2sh5ty56HWYugC7ciRXXsMOc9Mbyo0GeZNn/tJaBiREUy2H+6o61bRw YQ5wwZCHGVz35Jbjy/Uqiy8eAp5JM6g2cbVkCjMMUrQrbZuz5xZTLeqL2F3hW+0KkE/r qASbXO2x3csLo26SATsK8oJ4yMCZS4wiM47mIv8UvjtYj/U+U1ojrBzk9ExsBnT6vUlY pORw== d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=xE8WVVMDnRtovPC1V9dBM9HAx+vhRps+Dzxh1qhnGuM=; b=kPK3xbLLMpCxPd/XdxQFh2xfqxvwIlCEiD4DfM+1uA1H4Dm9MpwsJFFheYwFnN/QZ+ Q7q7hqDi9z7SDKV1/SDdlEAd57RjJlPbRDn52POEOeP4zxJ6JgJibuAXPYvMRzM+Mian BHr24jBgPGXqJQHcYkkFQOFFBuKi/8/WgSu7h2wcULovk8pkqqaIq2B0FMRgz/p/f93Y KSXMNLaoP+vhT+71ccL3v29EPfsdKYQfh1LExxsISvz1SdqB574rbXeTA07BahM4Mg+g 4+sgiclNXcNZoVrtrYN9vTifNVJd+fo2FqdoBCU/LnjKg/0nYN6xV+9rSbmsZeDl2Jy3 D+4Q== MyWjBhsmZv4BfA9tM2+hU90KIi3IuUbij9vnVgpjSn4N Tue, 09 Oct 2018 14:26:25 -0700 (PDT) References: Date: Tue, 9 Oct 2018 17:26:25 -0400 To: riverside@southslope.net Cc: mgs@autox.team.net Subject: Re: [Mgs] Fw: Hot B motor From: John DiFede via Mgs Errors-To: mgs-bounces@autox.team.net --===============2949163464698740812== --000000000000dc703d0577d26361 Try this web site https://www.aptfast.com/ John DiFede 1973 MGB On Tue, Oct 9, 2018 at 12:43 PM Ron Sanborn via Mgs wrote: > > > *From:* riverside@southslope.net > *Sent:* Monday, October 08, 2018 4:12 PM > *Subject:* Hot B motor > > I am helping a friend build an MGB motor for > autoXssing and track days. We are looking for > sources of high performance parts and guidance. > Any advice or knowledge you can share would be > most welcome. > > Thanks! > > Ron Sanborn > _______________________________________________ > > Mgs@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/mgs > > Unsubscribe: http://autox.team.net/mailman/options/mgs/difejo1@gmail.com > --000000000000dc703d0577d26361 Content-Transfer-Encoding: quoted-printable
Try this web site=C2=A0=C2=A0


John DiFe= de 1973 MGB

On T= ue, Oct 9, 2018 at 12:43 PM Ron Sanborn via Mgs <mgs@autox.team.net> wrote:
=C2=A0
=C2=A0
Sent: Monday, October 08, 2018 4:12 PM
Subject: Hot B motor
=C2=A0
I am helping a friend build an MGB motor for
autoXssing and track days.=C2=A0 We are looking for
sources of high performance parts and guidance.
Any advice or knowledge you can share would be
most welcome.
=C2=A0
Thanks!
=C2=A0
Ron Sanborn
_______________________________________________

Mgs@autox.team.net<= /a>
et=3D"_blank">http://www.team.net/donate.html


Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailma= n/options/mgs/difejo1@gmail.com
--000000000000dc703d0577d26361-- --===============2949163464698740812== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============2949163464698740812==-- From mgs-bounces@autox.team.net Tue Oct 9 21:02:18 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 6A53725890BD for ; Tue, 9 Oct 2018 21:02:18 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from server109.appriver.com (server109f.appriver.com [8.31.233.151]) by autox.team.net (Postfix) with ESMTP id 50C752588D3E for ; Tue, 9 Oct 2018 17:21:05 -0600 (MDT) Received: by server109.appriver.com (CommuniGate Pro PIPE 6.2.4) with PIPE id 102703185; Tue, 09 Oct 2018 19:20:59 -0400 Received: from [128.136.239.183] (HELO mail.scottmadden.com) by server109.appriver.com (CommuniGate Pro SMTP 6.2.4) with ESMTPS id 102703182; Tue, 09 Oct 2018 19:20:58 -0400 Received: from SM-EXCH01.madden.com (192.168.20.7) by SM-EXCH02.madden.com (192.168.20.8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384) id 15.1.1415.2; Tue, 9 Oct 2018 19:20:57 -0400 Received: from SM-EXCH01.madden.com ([fe80::585b:dc35:b359:28f2]) by SM-EXCH01.madden.com ([fe80::585b:dc35:b359:28f2%12]) with mapi id 15.01.1415.007; Tue, 9 Oct 2018 19:20:58 -0400 To: Zach Dorsch , Mglist Thread-Topic: [Mgs] Fw: Hot B motor Thread-Index: AQHUX++JUWtNXqvC2Eq0z6uIDAgtO6UXjXuAgAAAHIA= Date: Tue, 9 Oct 2018 23:20:58 +0000 References: <639797051.7127494.1539112833314@mail.yahoo.com> Accept-Language: en-US Content-Language: en-US x-originating-ip: [12.232.82.154] 100-75149-0-32767-f Subject: Re: [Mgs] Fw: Hot B motor From: Rick Starkweather via Mgs Errors-To: mgs-bounces@autox.team.net --===============8879086381214875777== Content-Language: en-US boundary="_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_"; type="multipart/alternative" --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ boundary="_000_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_" --_000_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Transfer-Encoding: base64 TXkgYXBvbG9naWVzIHRvIEhhcCwgUGV0ZXIgYW5kIERhdmU6DQoNCkkgdGhvdWdodCB0aGlzIHF1 ZXN0aW9uIGNhbWUgZnJvbSBteSBsb2NhbCBNRyBjYXIgY2x1YiBtZXNzYWdlIGJvYXJkIHNvIEkg cHJvdmlkZWQgYSBsb2NhbCBzb2x1dGlvbi4NCg0KUmljaw0KUmljayBTdGFya3dlYXRoZXIgfCBQ YXJ0bmVyDQoyNjI2IEdsZW53b29kIEF2ZS4sIFN1aXRlIDQ4MA0KUmFsZWlnaCwgTkMgMjc2MDgN Ck86ICg5MTkpIDc4MS00MTkxIHwgTTogKDkxOSkgMzQ1LTk4NzENCkY6ICg5MTkpIDc4MS0yNTM3 DQoNCltzaWduYXR1cmVfOTkyMzAwNzMyXTxodHRwOi8vd3d3LnNjb3R0bWFkZGVuLmNvbS8+DQoN CndlYnNpdGU8aHR0cDovL3d3dy5zY290dG1hZGRlbi5jb20vPiB8IGJpbzxodHRwOi8vd3d3LnNj b3R0bWFkZGVuLmNvbS9iaW9zLzMyL1JpY2stU3Rhcmt3ZWF0aGVyLmh0bWw+IHwgdkNhcmQ8aHR0 cDovL3d3dy5keW5hc2VuZC5jb20vc2lnbmF0dXJlcy9nZXQucGhwL3JzdGFya3dlYXRoZXItYXQt c2NvdHRtYWRkZW4uY29tLnZjZj4gfCBtYXA8aHR0cHM6Ly9tYXBzLmdvb2dsZS5jb20vbWFwcz9x PTI2MjYrR2xlbndvb2QrQXZlK1JhbGVpZ2gsK05DKzI3NjA4JmxsPTM1LjgxNzM5NiwtNzguNjYx Mzgmc3BuPTAuMDE0NTQ2LDAuMDE5Mjkmb2U9VVRGLTgmZ2w9dXMmaG5lYXI9MjYyNitHbGVud29v ZCtBdmUsK1JhbGVpZ2gsK1dha2UsK05vcnRoK0Nhcm9saW5hKzI3NjA4JnQ9bSZ6PTE2PiB8IGVt YWlsPG1haWx0bzpyc3Rhcmt3ZWF0aGVyQHNjb3R0bWFkZGVuLmNvbT4gICBbc2lnbmF0dXJlXzc1 NjY5NTI2MF0gPGh0dHA6Ly93d3cudHdpdHRlci5jb20vc2NvdHRtYWRkZW4+IFtzaWduYXR1cmVf MTU2OTQ2OTg3Ml0gPGh0dHA6Ly93d3cuc2NvdHRtYWRkZW4uY29tL3BhZ2UvMTYxL1JTUy5odG1s PiBbc2lnbmF0dXJlXzEwOTQxMjY0ODFdIDxodHRwczovL3d3dy5mYWNlYm9vay5jb20vU2NvdHRN YWRkZW5JbmM+IFtzaWduYXR1cmVfMjA5OTg5MDUwNV0gPGh0dHA6Ly93d3cubGlua2VkaW4uY29t L2NvbXBhbnkvc2NvdHRtYWRkZW4taW5jLj4gW3NpZ25hdHVyZV8xNTY5NTUzMjhdIDxza3lwZTpS aWNoYXJkJTIwRCUyMFN0YXJrd2VhdGhlcj4NCg0KDQoNCkZyb206IE1ncyA8bWdzLWJvdW5jZXNA YXV0b3gudGVhbS5uZXQ+IG9uIGJlaGFsZiBvZiBaYWNoIERvcnNjaCB2aWEgTWdzIDxtZ3NAYXV0 b3gudGVhbS5uZXQ+DQpSZXBseS1UbzogWmFjaCBEb3JzY2ggPGhlcnJfZG9yc2NoQHlhaG9vLmNv bT4NCkRhdGU6IFR1ZXNkYXksIE9jdG9iZXIgOSwgMjAxOCBhdCA3OjE1IFBNDQpUbzogTWdsaXN0 IDxtZ3NAYXV0b3gudGVhbS5uZXQ+DQpTdWJqZWN0OiBSZTogW01nc10gRnc6IEhvdCBCIG1vdG9y DQoNClRvIG5hbWUgYSBmZXc6DQoNCkhhcCBXYWxkcm9wDQpodHRwOi8vd3d3LmFjbWVzcGVlZHNo b3AuY29tLw0KDQoNClBldGVyIEJ1cmdlc3MNCmh0dHA6Ly93d3cubWctY2Fycy5vcmcudWsvcGV0 ZXJidXJnZXNzL2luZGV4c3RhcnQuaHRtbA0KDQoNCkRhdmUgSGVhZGxleQ0KaHR0cDovL3d3dy5m YXN0LW1nLmNvbS8NCg0KDQpPbiBUdWVzZGF5LCBPY3RvYmVyIDksIDIwMTgsIDExOjI4IEFNLCBS b24gU2FuYm9ybiB2aWEgTWdzIDxtZ3NAYXV0b3gudGVhbS5uZXQ+IHdyb3RlOg0KDQoNCkZyb206 IHJpdmVyc2lkZUBzb3V0aHNsb3BlLm5ldDxtYWlsdG86cml2ZXJzaWRlQHNvdXRoc2xvcGUubmV0 Pg0KU2VudDogTW9uZGF5LCBPY3RvYmVyIDA4LCAyMDE4IDQ6MTIgUE0NClN1YmplY3Q6IEhvdCBC IG1vdG9yDQoNCkkgYW0gaGVscGluZyBhIGZyaWVuZCBidWlsZCBhbiBNR0IgbW90b3IgZm9yDQph dXRvWHNzaW5nIGFuZCB0cmFjayBkYXlzLiAgV2UgYXJlIGxvb2tpbmcgZm9yDQpzb3VyY2VzIG9m IGhpZ2ggcGVyZm9ybWFuY2UgcGFydHMgYW5kIGd1aWRhbmNlLg0KQW55IGFkdmljZSBvciBrbm93 bGVkZ2UgeW91IGNhbiBzaGFyZSB3b3VsZCBiZQ0KbW9zdCB3ZWxjb21lLg0KDQpUaGFua3MhDQoN ClJvbiBTYW5ib3JuDQpfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f X19fXw0KDQoNCkRvbmF0ZTogaHR0cDovL3d3dy50ZWFtLm5ldC9kb25hdGUuaHRtbA0KU3VnZ2Vz dGVkIGFubnVhbCBkb25hdGlvbiAgJDEyLjc1DQoNCkFyY2hpdmU6IGh0dHA6Ly93d3cudGVhbS5u ZXQvcGlwZXJtYWlsL21ncw0KDQpVbnN1YnNjcmliZTogaHR0cDovL2F1dG94LnRlYW0ubmV0L21h aWxtYW4vb3B0aW9ucy9tZ3MvaGVycl9kb3JzY2hAeWFob28uY29tDQo= --_000_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-ID: <61AEBAB35B4A534A945DE3CF01766C68@scottmadden.com> Content-Transfer-Encoding: base64 PGh0bWwgeG1sbnM6dj0idXJuOnNjaGVtYXMtbWljcm9zb2Z0LWNvbTp2bWwiIHhtbG5zOm89InVy bjpzY2hlbWFzLW1pY3Jvc29mdC1jb206b2ZmaWNlOm9mZmljZSIgeG1sbnM6dz0idXJuOnNjaGVt YXMtbWljcm9zb2Z0LWNvbTpvZmZpY2U6d29yZCIgeG1sbnM6bT0iaHR0cDovL3NjaGVtYXMubWlj cm9zb2Z0LmNvbS9vZmZpY2UvMjAwNC8xMi9vbW1sIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcv VFIvUkVDLWh0bWw0MCI+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIg Y29udGVudD0idGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjxtZXRhIG5hbWU9IkdlbmVyYXRv ciIgY29udGVudD0iTWljcm9zb2Z0IFdvcmQgMTUgKGZpbHRlcmVkIG1lZGl1bSkiPg0KPCEtLVtp ZiAhbXNvXT48c3R5bGU+dlw6KiB7YmVoYXZpb3I6dXJsKCNkZWZhdWx0I1ZNTCk7fQ0Kb1w6KiB7 YmVoYXZpb3I6dXJsKCNkZWZhdWx0I1ZNTCk7fQ0Kd1w6KiB7YmVoYXZpb3I6dXJsKCNkZWZhdWx0 I1ZNTCk7fQ0KLnNoYXBlIHtiZWhhdmlvcjp1cmwoI2RlZmF1bHQjVk1MKTt9DQo8L3N0eWxlPjwh W2VuZGlmXS0tPjxzdHlsZT48IS0tDQovKiBGb250IERlZmluaXRpb25zICovDQpAZm9udC1mYWNl DQoJe2ZvbnQtZmFtaWx5OiJDYW1icmlhIE1hdGgiOw0KCXBhbm9zZS0xOjIgNCA1IDMgNSA0IDYg MyAyIDQ7fQ0KQGZvbnQtZmFjZQ0KCXtmb250LWZhbWlseTpDYWxpYnJpOw0KCXBhbm9zZS0xOjIg MTUgNSAyIDIgMiA0IDMgMiA0O30NCkBmb250LWZhY2UNCgl7Zm9udC1mYW1pbHk6VGltZXM7DQoJ cGFub3NlLTE6MiAwIDUgMCAwIDAgMCAwIDAgMDt9DQpAZm9udC1mYWNlDQoJe2ZvbnQtZmFtaWx5 OlRhaG9tYTsNCglwYW5vc2UtMToyIDExIDYgNCAzIDUgNCA0IDIgNDt9DQovKiBTdHlsZSBEZWZp bml0aW9ucyAqLw0KcC5Nc29Ob3JtYWwsIGxpLk1zb05vcm1hbCwgZGl2Lk1zb05vcm1hbA0KCXtt YXJnaW46MGluOw0KCW1hcmdpbi1ib3R0b206LjAwMDFwdDsNCglmb250LXNpemU6MTEuMHB0Ow0K CWZvbnQtZmFtaWx5OiJDYWxpYnJpIixzYW5zLXNlcmlmO30NCmE6bGluaywgc3Bhbi5Nc29IeXBl cmxpbmsNCgl7bXNvLXN0eWxlLXByaW9yaXR5Ojk5Ow0KCWNvbG9yOmJsdWU7DQoJdGV4dC1kZWNv cmF0aW9uOnVuZGVybGluZTt9DQphOnZpc2l0ZWQsIHNwYW4uTXNvSHlwZXJsaW5rRm9sbG93ZWQN Cgl7bXNvLXN0eWxlLXByaW9yaXR5Ojk5Ow0KCWNvbG9yOnB1cnBsZTsNCgl0ZXh0LWRlY29yYXRp b246dW5kZXJsaW5lO30NCnAubXNvbm9ybWFsMCwgbGkubXNvbm9ybWFsMCwgZGl2Lm1zb25vcm1h bDANCgl7bXNvLXN0eWxlLW5hbWU6bXNvbm9ybWFsOw0KCW1zby1tYXJnaW4tdG9wLWFsdDphdXRv Ow0KCW1hcmdpbi1yaWdodDowaW47DQoJbXNvLW1hcmdpbi1ib3R0b20tYWx0OmF1dG87DQoJbWFy Z2luLWxlZnQ6MGluOw0KCWZvbnQtc2l6ZToxMS4wcHQ7DQoJZm9udC1mYW1pbHk6IkNhbGlicmki LHNhbnMtc2VyaWY7fQ0KcC55YWhvby1xdW90ZWQtYmVnaW4sIGxpLnlhaG9vLXF1b3RlZC1iZWdp biwgZGl2LnlhaG9vLXF1b3RlZC1iZWdpbg0KCXttc28tc3R5bGUtbmFtZTp5YWhvby1xdW90ZWQt YmVnaW47DQoJbXNvLW1hcmdpbi10b3AtYWx0OmF1dG87DQoJbWFyZ2luLXJpZ2h0OjBpbjsNCglt c28tbWFyZ2luLWJvdHRvbS1hbHQ6YXV0bzsNCgltYXJnaW4tbGVmdDowaW47DQoJZm9udC1zaXpl OjExLjBwdDsNCglmb250LWZhbWlseToiQ2FsaWJyaSIsc2Fucy1zZXJpZjt9DQpzcGFuLkVtYWls U3R5bGUxOQ0KCXttc28tc3R5bGUtdHlwZTpwZXJzb25hbC1yZXBseTsNCglmb250LWZhbWlseToi Q2FsaWJyaSIsc2Fucy1zZXJpZjt9DQouTXNvQ2hwRGVmYXVsdA0KCXttc28tc3R5bGUtdHlwZTpl eHBvcnQtb25seTsNCglmb250LXNpemU6MTAuMHB0O30NCkBwYWdlIFdvcmRTZWN0aW9uMQ0KCXtz aXplOjguNWluIDExLjBpbjsNCgltYXJnaW46MS4waW4gMS4waW4gMS4waW4gMS4waW47fQ0KZGl2 LldvcmRTZWN0aW9uMQ0KCXtwYWdlOldvcmRTZWN0aW9uMTt9DQotLT48L3N0eWxlPg0KPC9oZWFk Pg0KPGJvZHkgbGFuZz0iRU4tVVMiIGxpbms9ImJsdWUiIHZsaW5rPSJwdXJwbGUiPg0KPGRpdiBj bGFzcz0iV29yZFNlY3Rpb24xIj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPk15IGFwb2xvZ2llcyB0 byBIYXAsIFBldGVyIGFuZCBEYXZlOjxvOnA+PC9vOnA+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1h bCI+PG86cD4mbmJzcDs8L286cD48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj5JIHRob3VnaHQg dGhpcyBxdWVzdGlvbiBjYW1lIGZyb20gbXkgbG9jYWwgTUcgY2FyIGNsdWIgbWVzc2FnZSBib2Fy ZCBzbyBJIHByb3ZpZGVkIGEgbG9jYWwgc29sdXRpb24uPG86cD48L286cD48L3A+DQo8cCBjbGFz cz0iTXNvTm9ybWFsIj48bzpwPiZuYnNwOzwvbzpwPjwvcD4NCjxwIGNsYXNzPSJNc29Ob3JtYWwi PlJpY2s8bzpwPjwvbzpwPjwvcD4NCjxkaXY+DQo8dGFibGUgY2xhc3M9Ik1zb05vcm1hbFRhYmxl IiBib3JkZXI9IjAiIGNlbGxwYWRkaW5nPSIwIj4NCjx0Ym9keT4NCjx0cj4NCjx0ZCBzdHlsZT0i cGFkZGluZzowaW4gMGluIDBpbiAwaW4iPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PGI+PHNwYW4g c3R5bGU9ImZvbnQtc2l6ZToxMC4wcHQ7Zm9udC1mYW1pbHk6JnF1b3Q7QXJpYWwmcXVvdDssc2Fu cy1zZXJpZjtjb2xvcjojNUY2MDYyIj5SaWNrIFN0YXJrd2VhdGhlcjwvc3Bhbj48L2I+PHNwYW4g c3R5bGU9ImZvbnQtc2l6ZTo5LjBwdDtmb250LWZhbWlseTomcXVvdDtBcmlhbCZxdW90OyxzYW5z LXNlcmlmO2NvbG9yOiM1RjYwNjIiPiZuYnNwOzwvc3Bhbj48c3BhbiBzdHlsZT0iZm9udC1zaXpl OjcuNXB0O2ZvbnQtZmFtaWx5OiZxdW90O0FyaWFsJnF1b3Q7LHNhbnMtc2VyaWY7Y29sb3I6I0I5 QjlCOSI+fDwvc3Bhbj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjkuMHB0O2ZvbnQtZmFtaWx5OiZx dW90O0FyaWFsJnF1b3Q7LHNhbnMtc2VyaWY7Y29sb3I6IzVGNjA2MiI+Jm5ic3A7UGFydG5lcjwv c3Bhbj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtmb250LWZhbWlseTpUaW1lcyI+PGJy Pg0KPC9zcGFuPjxzcGFuIHN0eWxlPSJmb250LXNpemU6OS4wcHQ7Zm9udC1mYW1pbHk6JnF1b3Q7 QXJpYWwmcXVvdDssc2Fucy1zZXJpZjtjb2xvcjojNUY2MDYyIj4yNjI2IEdsZW53b29kIEF2ZS4s IFN1aXRlIDQ4MDxicj4NClJhbGVpZ2gsJm5ic3A7TkMmbmJzcDsyNzYwODxicj4NCk86Jm5ic3A7 KDkxOSkgNzgxLTQxOTEmbmJzcDs8L3NwYW4+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo3LjVwdDtm b250LWZhbWlseTomcXVvdDtBcmlhbCZxdW90OyxzYW5zLXNlcmlmO2NvbG9yOiNCOUI5QjkiPnw8 L3NwYW4+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo5LjBwdDtmb250LWZhbWlseTomcXVvdDtBcmlh bCZxdW90OyxzYW5zLXNlcmlmO2NvbG9yOiM1RjYwNjIiPiZuYnNwO006Jm5ic3A7KDkxOSkgMzQ1 LTk4NzE8YnI+DQpGOiZuYnNwOyg5MTkpIDc4MS0yNTM3PC9zcGFuPjxzcGFuIHN0eWxlPSJmb250 LXNpemU6MTIuMHB0O2ZvbnQtZmFtaWx5OlRpbWVzIj48bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8 L3RkPg0KPHRkIHN0eWxlPSJwYWRkaW5nOi43NXB0IC43NXB0IC43NXB0IC43NXB0Ij4NCjxwIGNs YXNzPSJNc29Ob3JtYWwiPjxhIGhyZWY9Imh0dHA6Ly93d3cuc2NvdHRtYWRkZW4uY29tLyI+PHNw YW4gc3R5bGU9ImZvbnQtc2l6ZToxMi4wcHQ7Zm9udC1mYW1pbHk6VGltZXM7dGV4dC1kZWNvcmF0 aW9uOm5vbmUiPjxpbWcgYm9yZGVyPSIwIiB3aWR0aD0iMTYzIiBoZWlnaHQ9IjkwIiBzdHlsZT0i d2lkdGg6MS42OTc5aW47aGVpZ2h0Oi45Mzc1aW4iIGlkPSJQaWN0dXJlX3gwMDIwXzYiIHNyYz0i Y2lkOmltYWdlMDAxLmdpZkAwMUQ0NjAwNS4zNEJCNzM3MCIgYWx0PSJzaWduYXR1cmVfOTkyMzAw NzMyIj48L3NwYW4+PC9hPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTIuMHB0O2ZvbnQtZmFtaWx5 OlRpbWVzIj48bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8L3RkPg0KPC90cj4NCjx0cj4NCjx0ZCBj b2xzcGFuPSIyIiBzdHlsZT0icGFkZGluZzozLjc1cHQgMGluIDBpbiAwaW4iPg0KPHAgY2xhc3M9 Ik1zb05vcm1hbCI+PGI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo4LjBwdDtjb2xvcjojMjdCQ0Q3 Ij48YSBocmVmPSJodHRwOi8vd3d3LnNjb3R0bWFkZGVuLmNvbS8iPjxzcGFuIHN0eWxlPSJjb2xv cjojMjdCQ0Q3O3RleHQtZGVjb3JhdGlvbjpub25lIj53ZWJzaXRlPC9zcGFuPjwvYT4mbmJzcDs8 L3NwYW4+PC9iPjxiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6Ny41cHQ7Y29sb3I6IzI3QkNENyI+ fDwvc3Bhbj48L2I+PGI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo4LjBwdDtjb2xvcjojMjdCQ0Q3 Ij4mbmJzcDs8YSBocmVmPSJodHRwOi8vd3d3LnNjb3R0bWFkZGVuLmNvbS9iaW9zLzMyL1JpY2st U3Rhcmt3ZWF0aGVyLmh0bWwiPjxzcGFuIHN0eWxlPSJjb2xvcjojMjdCQ0Q3O3RleHQtZGVjb3Jh dGlvbjpub25lIj5iaW88L3NwYW4+PC9hPiZuYnNwOzwvc3Bhbj48L2I+PGI+PHNwYW4gc3R5bGU9 ImZvbnQtc2l6ZTo3LjVwdDtjb2xvcjojMjdCQ0Q3Ij58PC9zcGFuPjwvYj48Yj48c3BhbiBzdHls ZT0iZm9udC1zaXplOjguMHB0O2NvbG9yOiMyN0JDRDciPiZuYnNwOzxhIGhyZWY9Imh0dHA6Ly93 d3cuZHluYXNlbmQuY29tL3NpZ25hdHVyZXMvZ2V0LnBocC9yc3Rhcmt3ZWF0aGVyLWF0LXNjb3R0 bWFkZGVuLmNvbS52Y2YiPjxzcGFuIHN0eWxlPSJjb2xvcjojMjdCQ0Q3O3RleHQtZGVjb3JhdGlv bjpub25lIj52Q2FyZDwvc3Bhbj48L2E+Jm5ic3A7PC9zcGFuPjwvYj48Yj48c3BhbiBzdHlsZT0i Zm9udC1zaXplOjcuNXB0O2NvbG9yOiMyN0JDRDciPnw8L3NwYW4+PC9iPjxiPjxzcGFuIHN0eWxl PSJmb250LXNpemU6OC4wcHQ7Y29sb3I6IzI3QkNENyI+Jm5ic3A7PGEgaHJlZj0iaHR0cHM6Ly9t YXBzLmdvb2dsZS5jb20vbWFwcz9xPTI2MjYmIzQzO0dsZW53b29kJiM0MztBdmUmIzQzO1JhbGVp Z2gsJiM0MztOQyYjNDM7Mjc2MDgmYW1wO2xsPTM1LjgxNzM5NiwtNzguNjYxMzgmYW1wO3Nwbj0w LjAxNDU0NiwwLjAxOTI5JmFtcDtvZT1VVEYtOCZhbXA7Z2w9dXMmYW1wO2huZWFyPTI2MjYmIzQz O0dsZW53b29kJiM0MztBdmUsJiM0MztSYWxlaWdoLCYjNDM7V2FrZSwmIzQzO05vcnRoJiM0MztD YXJvbGluYSYjNDM7Mjc2MDgmYW1wO3Q9bSZhbXA7ej0xNiI+PHNwYW4gc3R5bGU9ImNvbG9yOiMy N0JDRDc7dGV4dC1kZWNvcmF0aW9uOm5vbmUiPm1hcDwvc3Bhbj48L2E+Jm5ic3A7PC9zcGFuPjwv Yj48Yj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjcuNXB0O2NvbG9yOiMyN0JDRDciPnw8L3NwYW4+ PC9iPjxiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6OC4wcHQ7Y29sb3I6IzI3QkNENyI+Jm5ic3A7 PGEgaHJlZj0ibWFpbHRvOnJzdGFya3dlYXRoZXJAc2NvdHRtYWRkZW4uY29tIj48c3BhbiBzdHls ZT0iY29sb3I6IzI3QkNENzt0ZXh0LWRlY29yYXRpb246bm9uZSI+ZW1haWw8L3NwYW4+PC9hPiZu YnNwOyZuYnNwOyZuYnNwOzwvc3Bhbj48L2I+PGEgaHJlZj0iaHR0cDovL3d3dy50d2l0dGVyLmNv bS9zY290dG1hZGRlbiI+PGI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo4LjBwdDt0ZXh0LWRlY29y YXRpb246bm9uZSI+PGltZyBib3JkZXI9IjAiIHdpZHRoPSIyNSIgaGVpZ2h0PSIxNyIgc3R5bGU9 IndpZHRoOi4yNjA0aW47aGVpZ2h0Oi4xNzdpbiIgaWQ9IlBpY3R1cmVfeDAwMjBfNSIgc3JjPSJj aWQ6aW1hZ2UwMDIuZ2lmQDAxRDQ2MDA1LjM0QkI3MzcwIiBhbHQ9InNpZ25hdHVyZV83NTY2OTUy NjAiPjwvc3Bhbj48L2I+PC9hPjxhIGhyZWY9Imh0dHA6Ly93d3cuc2NvdHRtYWRkZW4uY29tL3Bh Z2UvMTYxL1JTUy5odG1sIj48Yj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjguMHB0O3RleHQtZGVj b3JhdGlvbjpub25lIj48aW1nIGJvcmRlcj0iMCIgd2lkdGg9IjIyIiBoZWlnaHQ9IjE3IiBzdHls ZT0id2lkdGg6LjIyOTFpbjtoZWlnaHQ6LjE3N2luIiBpZD0iUGljdHVyZV94MDAyMF80IiBzcmM9 ImNpZDppbWFnZTAwMy5naWZAMDFENDYwMDUuMzRCQjczNzAiIGFsdD0ic2lnbmF0dXJlXzE1Njk0 Njk4NzIiPjwvc3Bhbj48L2I+PC9hPjxhIGhyZWY9Imh0dHBzOi8vd3d3LmZhY2Vib29rLmNvbS9T Y290dE1hZGRlbkluYyI+PGI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTo4LjBwdDt0ZXh0LWRlY29y YXRpb246bm9uZSI+PGltZyBib3JkZXI9IjAiIHdpZHRoPSIyMiIgaGVpZ2h0PSIxNyIgc3R5bGU9 IndpZHRoOi4yMjkxaW47aGVpZ2h0Oi4xNzdpbiIgaWQ9IlBpY3R1cmVfeDAwMjBfMyIgc3JjPSJj aWQ6aW1hZ2UwMDQuZ2lmQDAxRDQ2MDA1LjM0QkI3MzcwIiBhbHQ9InNpZ25hdHVyZV8xMDk0MTI2 NDgxIj48L3NwYW4+PC9iPjwvYT48YSBocmVmPSJodHRwOi8vd3d3LmxpbmtlZGluLmNvbS9jb21w YW55L3Njb3R0bWFkZGVuLWluYy4iPjxiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6OC4wcHQ7dGV4 dC1kZWNvcmF0aW9uOm5vbmUiPjxpbWcgYm9yZGVyPSIwIiB3aWR0aD0iMjIiIGhlaWdodD0iMTci IHN0eWxlPSJ3aWR0aDouMjI5MWluO2hlaWdodDouMTc3aW4iIGlkPSJQaWN0dXJlX3gwMDIwXzIi IHNyYz0iY2lkOmltYWdlMDA1LmdpZkAwMUQ0NjAwNS4zNEJCNzM3MCIgYWx0PSJzaWduYXR1cmVf MjA5OTg5MDUwNSI+PC9zcGFuPjwvYj48L2E+PGEgaHJlZj0ic2t5cGU6UmljaGFyZCUyMEQlMjBT dGFya3dlYXRoZXIiPjxiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6OC4wcHQ7dGV4dC1kZWNvcmF0 aW9uOm5vbmUiPjxpbWcgYm9yZGVyPSIwIiB3aWR0aD0iMjEiIGhlaWdodD0iMTciIHN0eWxlPSJ3 aWR0aDouMjE4N2luO2hlaWdodDouMTc3aW4iIGlkPSJQaWN0dXJlX3gwMDIwXzEiIHNyYz0iY2lk OmltYWdlMDA2LmdpZkAwMUQ0NjAwNS4zNEJCNzM3MCIgYWx0PSJzaWduYXR1cmVfMTU2OTU1MzI4 Ij48L3NwYW4+PC9iPjwvYT48c3BhbiBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtmb250LWZhbWls eTpUaW1lcyI+PG86cD48L286cD48L3NwYW4+PC9wPg0KPC90ZD4NCjwvdHI+DQo8L3Rib2R5Pg0K PC90YWJsZT4NCjwvZGl2Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PG86cD4mbmJzcDs8L286cD48 L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48bzpwPiZuYnNwOzwvbzpwPjwvcD4NCjxkaXYgc3R5 bGU9ImJvcmRlcjpub25lO2JvcmRlci10b3A6c29saWQgI0I1QzRERiAxLjBwdDtwYWRkaW5nOjMu MHB0IDBpbiAwaW4gMGluIj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxiPjxzcGFuIHN0eWxlPSJm b250LXNpemU6MTIuMHB0O2NvbG9yOmJsYWNrIj5Gcm9tOiA8L3NwYW4+PC9iPjxzcGFuIHN0eWxl PSJmb250LXNpemU6MTIuMHB0O2NvbG9yOmJsYWNrIj5NZ3MgJmx0O21ncy1ib3VuY2VzQGF1dG94 LnRlYW0ubmV0Jmd0OyBvbiBiZWhhbGYgb2YgWmFjaCBEb3JzY2ggdmlhIE1ncyAmbHQ7bWdzQGF1 dG94LnRlYW0ubmV0Jmd0Ozxicj4NCjxiPlJlcGx5LVRvOiA8L2I+WmFjaCBEb3JzY2ggJmx0O2hl cnJfZG9yc2NoQHlhaG9vLmNvbSZndDs8YnI+DQo8Yj5EYXRlOiA8L2I+VHVlc2RheSwgT2N0b2Jl ciA5LCAyMDE4IGF0IDc6MTUgUE08YnI+DQo8Yj5UbzogPC9iPk1nbGlzdCAmbHQ7bWdzQGF1dG94 LnRlYW0ubmV0Jmd0Ozxicj4NCjxiPlN1YmplY3Q6IDwvYj5SZTogW01nc10gRnc6IEhvdCBCIG1v dG9yPG86cD48L286cD48L3NwYW4+PC9wPg0KPC9kaXY+DQo8ZGl2Pg0KPHAgY2xhc3M9Ik1zb05v cm1hbCI+PG86cD4mbmJzcDs8L286cD48L3A+DQo8L2Rpdj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwi PlRvIG5hbWUgYSBmZXc6IDxvOnA+PC9vOnA+PC9wPg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3Jt YWwiPjxvOnA+Jm5ic3A7PC9vOnA+PC9wPg0KPC9kaXY+DQo8ZGl2Pg0KPHAgY2xhc3M9Ik1zb05v cm1hbCI+SGFwIFdhbGRyb3AmbmJzcDsgPG86cD48L286cD48L3A+DQo8ZGl2Pg0KPHAgY2xhc3M9 Ik1zb05vcm1hbCI+PGEgaHJlZj0iaHR0cDovL3d3dy5hY21lc3BlZWRzaG9wLmNvbS8iIHRhcmdl dD0iX2JsYW5rIj5odHRwOi8vd3d3LmFjbWVzcGVlZHNob3AuY29tLzwvYT4mbmJzcDsNCjxvOnA+ PC9vOnA+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PGJyPg0KPGJyPg0KUGV0ZXIgQnVyZ2Vz czxvOnA+PC9vOnA+PC9wPg0KPC9kaXY+DQo8ZGl2Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PGEg aHJlZj0iaHR0cDovL3d3dy5tZy1jYXJzLm9yZy51ay9wZXRlcmJ1cmdlc3MvaW5kZXhzdGFydC5o dG1sIiB0YXJnZXQ9Il9ibGFuayI+aHR0cDovL3d3dy5tZy1jYXJzLm9yZy51ay9wZXRlcmJ1cmdl c3MvaW5kZXhzdGFydC5odG1sPC9hPiZuYnNwOw0KPG86cD48L286cD48L3A+DQo8cCBjbGFzcz0i TXNvTm9ybWFsIj48bzpwPiZuYnNwOzwvbzpwPjwvcD4NCjwvZGl2Pg0KPGRpdj4NCjxwIGNsYXNz PSJNc29Ob3JtYWwiPjxvOnA+Jm5ic3A7PC9vOnA+PC9wPg0KPC9kaXY+DQo8ZGl2Pg0KPHAgY2xh c3M9Ik1zb05vcm1hbCI+RGF2ZSBIZWFkbGV5PG86cD48L286cD48L3A+DQo8L2Rpdj4NCjxkaXY+ DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48YSBocmVmPSJodHRwOi8vd3d3LmZhc3QtbWcuY29tLyIg dGFyZ2V0PSJfYmxhbmsiPmh0dHA6Ly93d3cuZmFzdC1tZy5jb20vPC9hPiZuYnNwOw0KPG86cD48 L286cD48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48bzpwPiZuYnNwOzwvbzpwPjwvcD4NCjxw IGNsYXNzPSJ5YWhvby1xdW90ZWQtYmVnaW4iIHN0eWxlPSJtYXJnaW4tdG9wOjBpbiI+PHNwYW4g c3R5bGU9ImZvbnQtc2l6ZToxMS41cHQ7Y29sb3I6IzcxNUZGQSI+T24gVHVlc2RheSwgT2N0b2Jl ciA5LCAyMDE4LCAxMToyOCBBTSwgUm9uIFNhbmJvcm4gdmlhIE1ncyAmbHQ7bWdzQGF1dG94LnRl YW0ubmV0Jmd0OyB3cm90ZTo8bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8YmxvY2txdW90ZSBzdHls ZT0ibWFyZ2luLXRvcDo1LjBwdDttYXJnaW4tYm90dG9tOjUuMHB0Ij4NCjxkaXYgaWQ9Inlpdjkz OTMxNzA0NDAiPg0KPGRpdj4NCjxkaXY+DQo8ZGl2Pg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3Jt YWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTIuMHB0O2NvbG9yOmJsYWNrIj4mbmJzcDs8bzpw PjwvbzpwPjwvc3Bhbj48L3A+DQo8L2Rpdj4NCjxkaXY+DQo8ZGl2Pg0KPGRpdj4NCjxwIGNsYXNz PSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTAuMHB0O2ZvbnQtZmFtaWx5OiZx dW90O1RhaG9tYSZxdW90OyxzYW5zLXNlcmlmO2NvbG9yOmJsYWNrIj4mbmJzcDs8bzpwPjwvbzpw Pjwvc3Bhbj48L3A+DQo8L2Rpdj4NCjxkaXY+DQo8ZGl2Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCIg c3R5bGU9ImJhY2tncm91bmQ6d2hpdGVzbW9rZSI+PGI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTox MC4wcHQ7Zm9udC1mYW1pbHk6JnF1b3Q7VGFob21hJnF1b3Q7LHNhbnMtc2VyaWY7Y29sb3I6Ymxh Y2siPkZyb206PC9zcGFuPjwvYj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjEwLjBwdDtmb250LWZh bWlseTomcXVvdDtUYWhvbWEmcXVvdDssc2Fucy1zZXJpZjtjb2xvcjpibGFjayI+DQo8YSBocmVm PSJtYWlsdG86cml2ZXJzaWRlQHNvdXRoc2xvcGUubmV0IiB0YXJnZXQ9Il9ibGFuayIgdGl0bGU9 InJpdmVyc2lkZUBzb3V0aHNsb3BlLm5ldCI+DQpyaXZlcnNpZGVAc291dGhzbG9wZS5uZXQ8L2E+ IDxvOnA+PC9vOnA+PC9zcGFuPjwvcD4NCjwvZGl2Pg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3Jt YWwiIHN0eWxlPSJiYWNrZ3JvdW5kOndoaXRlc21va2UiPjxiPjxzcGFuIHN0eWxlPSJmb250LXNp emU6MTAuMHB0O2ZvbnQtZmFtaWx5OiZxdW90O1RhaG9tYSZxdW90OyxzYW5zLXNlcmlmO2NvbG9y OmJsYWNrIj5TZW50Ojwvc3Bhbj48L2I+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMC4wcHQ7Zm9u dC1mYW1pbHk6JnF1b3Q7VGFob21hJnF1b3Q7LHNhbnMtc2VyaWY7Y29sb3I6YmxhY2siPiBNb25k YXksIE9jdG9iZXIgMDgsIDIwMTggNDoxMiBQTTxvOnA+PC9vOnA+PC9zcGFuPjwvcD4NCjwvZGl2 Pg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiIHN0eWxlPSJiYWNrZ3JvdW5kOndoaXRlc21v a2UiPjxiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTAuMHB0O2ZvbnQtZmFtaWx5OiZxdW90O1Rh aG9tYSZxdW90OyxzYW5zLXNlcmlmO2NvbG9yOmJsYWNrIj5TdWJqZWN0Ojwvc3Bhbj48L2I+PHNw YW4gc3R5bGU9ImZvbnQtc2l6ZToxMC4wcHQ7Zm9udC1mYW1pbHk6JnF1b3Q7VGFob21hJnF1b3Q7 LHNhbnMtc2VyaWY7Y29sb3I6YmxhY2siPiBIb3QgQiBtb3RvcjxvOnA+PC9vOnA+PC9zcGFuPjwv cD4NCjwvZGl2Pg0KPC9kaXY+DQo8L2Rpdj4NCjxkaXY+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48 c3BhbiBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtjb2xvcjpibGFjayI+Jm5ic3A7PG86cD48L286 cD48L3NwYW4+PC9wPg0KPC9kaXY+DQo8L2Rpdj4NCjxkaXY+DQo8ZGl2Pg0KPGRpdj4NCjxkaXY+ DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtjb2xv cjpibGFjayI+SSBhbSBoZWxwaW5nIGEgZnJpZW5kIGJ1aWxkIGFuIE1HQiBtb3RvciBmb3I8bzpw PjwvbzpwPjwvc3Bhbj48L3A+DQo8L2Rpdj4NCjxkaXY+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48 c3BhbiBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtjb2xvcjpibGFjayI+YXV0b1hzc2luZyBhbmQg dHJhY2sgZGF5cy4mbmJzcDsgV2UgYXJlIGxvb2tpbmcgZm9yPG86cD48L286cD48L3NwYW4+PC9w Pg0KPC9kaXY+DQo8ZGl2Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQt c2l6ZToxMi4wcHQ7Y29sb3I6YmxhY2siPnNvdXJjZXMgb2YgaGlnaCBwZXJmb3JtYW5jZSBwYXJ0 cyBhbmQgZ3VpZGFuY2UuPG86cD48L286cD48L3NwYW4+PC9wPg0KPC9kaXY+DQo8ZGl2Pg0KPHAg Y2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMi4wcHQ7Y29sb3I6Ymxh Y2siPkFueSBhZHZpY2Ugb3Iga25vd2xlZGdlIHlvdSBjYW4gc2hhcmUgd291bGQgYmU8bzpwPjwv bzpwPjwvc3Bhbj48L3A+DQo8L2Rpdj4NCjxkaXY+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3Bh biBzdHlsZT0iZm9udC1zaXplOjEyLjBwdDtjb2xvcjpibGFjayI+bW9zdCB3ZWxjb21lLjxvOnA+ PC9vOnA+PC9zcGFuPjwvcD4NCjwvZGl2Pg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxz cGFuIHN0eWxlPSJmb250LXNpemU6MTIuMHB0O2NvbG9yOmJsYWNrIj4mbmJzcDs8bzpwPjwvbzpw Pjwvc3Bhbj48L3A+DQo8L2Rpdj4NCjxkaXY+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBz dHlsZT0iZm9udC1zaXplOjEyLjBwdDtjb2xvcjpibGFjayI+VGhhbmtzITxvOnA+PC9vOnA+PC9z cGFuPjwvcD4NCjwvZGl2Pg0KPGRpdj4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxl PSJmb250LXNpemU6MTIuMHB0O2NvbG9yOmJsYWNrIj4mbmJzcDs8bzpwPjwvbzpwPjwvc3Bhbj48 L3A+DQo8L2Rpdj4NCjxkaXY+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBzdHlsZT0iZm9u dC1zaXplOjEyLjBwdDtjb2xvcjpibGFjayI+Um9uIFNhbmJvcm48bzpwPjwvbzpwPjwvc3Bhbj48 L3A+DQo8L2Rpdj4NCjwvZGl2Pg0KPC9kaXY+DQo8L2Rpdj4NCjwvZGl2Pg0KPC9kaXY+DQo8L2Rp dj4NCjwvZGl2Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+X19fX19fX19fX19fX19fX19fX19fX19f X19fX19fX19fX19fX19fX19fX19fX188YnI+DQo8YnI+DQo8YnI+DQpEb25hdGU6IDxhIGhyZWY9 Imh0dHA6Ly93d3cudGVhbS5uZXQvZG9uYXRlLmh0bWwiIHRhcmdldD0iX2JsYW5rIj5odHRwOi8v d3d3LnRlYW0ubmV0L2RvbmF0ZS5odG1sPC9hPjxicj4NClN1Z2dlc3RlZCBhbm51YWwgZG9uYXRp b24mbmJzcDsgJDEyLjc1PGJyPg0KPGJyPg0KQXJjaGl2ZTogPGEgaHJlZj0iaHR0cDovL3d3dy50 ZWFtLm5ldC9waXBlcm1haWwvbWdzIiB0YXJnZXQ9Il9ibGFuayI+aHR0cDovL3d3dy50ZWFtLm5l dC9waXBlcm1haWwvbWdzPC9hPjxicj4NCjxicj4NClVuc3Vic2NyaWJlOiA8YSBocmVmPSJodHRw Oi8vYXV0b3gudGVhbS5uZXQvbWFpbG1hbi9vcHRpb25zL21ncy9oZXJyX2RvcnNjaEB5YWhvby5j b20iIHRhcmdldD0iX2JsYW5rIj4NCmh0dHA6Ly9hdXRveC50ZWFtLm5ldC9tYWlsbWFuL29wdGlv bnMvbWdzL2hlcnJfZG9yc2NoQHlhaG9vLmNvbTwvYT48bzpwPjwvbzpwPjwvcD4NCjwvYmxvY2tx dW90ZT4NCjwvZGl2Pg0KPC9kaXY+DQo8L2Rpdj4NCjwvYm9keT4NCjwvaHRtbD4NCg== --_000_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_-- --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image001.gif Content-Disposition: inline; filename="image001.gif"; size=4169; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhowBaAIcAAAAAADU3OTs8Pjw+QD5AQkJDRUVGSUZISkhISklKTEpMTkxNT01OUE5QUlhP T1BQU1FSVFJUVlRVVlVWWFZYWl9SUVpXWVhZWllaXFpcXlxcXl1eYFZiZV5gYmZTUmtfX2BeYWBg YmFiZGNkZmRjZWRlZmVmaGdoaWhnamhoamlqbGpsbmxrbmxtbmFrcG1ucG5wcXBvcnFydHV2eHd4 enp6fH19gDyQoS6ovwCuzgOx0AWx0Qmy0Qyz0g+31h2vyRyxzBG10hW10ha21BW41hi20xi31B24 1Ry72By82S+pwSKyzCC51SW71ia81yG82CS/2yu81yy91zCqwTG92D660SHC3jfA2TvA2j3B2kGV pn6AgVG+0ma6y0DE20XF20nE20rH3UzG3U7I3lDC1VXJ307J4FDL4lrM4HbP32HN4WbO4WrR437W 54B/goKChIaGiIaIiYiHiYmKjI6OkI6QkZCPkpCRkpKSlJKUlZSTlZSVlpaWmJaYmZiXmpmZmpqa nJucnZybnJycnp6eoKCfoKOjpKamqKeoqaqrrK6usK6wsbCvsLOztLa2uLe4uLm5urq7vLu8vby7 vL29vr6/wIjO3IbT4IbX6ILY5obZ6Ija6Yje7I3a6Y/e7pbg7p7g7bnDxKLh7KXj7afk7qnk7rHo 8bbo8ci6ucC/wcHBwsLCxMPFxMTFxcDFy8HGzMfHyMbIx8bIycXKz8jHyMvLy8rO0s7O0M7Qz87R 1tLS09LW2tfW2Nfa3tnZ2tvb3Nzc29zc3dre4d/f4cLr8t7g4N/i5dDv9dHw9dfx99ny997z9970 99jz+ODg3+Hh4eLi5OTj4+Tk4+Xl5ebm6ODp7Ofq7Ojn6ejo5+np6evr7ers6+vs7Ozr6+zr7Ozs 6+3t7e/v8O7w7+H1+Of2+u/w8O/4+/Lv7vDv8fDw7//x7vHx8fHz9PTz8/T08/X19fb2+PH6+/L6 /Pf4+PX9/vz29Pn49/j4+fr6/Pr+/v/7+Pz8+/38/AAAAAAAAAAAACH5BAEAAP0ALAAAAACjAFoA AAj/APsJHEiwoMGDCBMqXMiwocOHECNKFIhvosWLGDNq3IgQHsePIEOKxMhupMmTKE2CS8mypUuI 1l7KnEmTGs2bOE8ay8mzp0ZhPoMKfdhrqNGjBnchXXo0F9OnQW0dXdPEidWrV5l8SQa15SyjaIJg HWv1CBNkXVO+GnrqSFUnR4L0mEt3bg42aVG6GrpJiNUiYE4tU0a4sLJxmq40yztyr9BMQ5wYUbOw 1A4hxxiHdBw0k5EmUcYtHBVksmaQnH16PjJG3uggTLyQO80xdU9ORo6YyfeaSRbRtDXaljmtFaRI kVB1SfKkSqhpCkn7Bh4c43CXdTRkwMC9wg0rUHBw/9CQZx9C6b+rZ7zO0o8CDRs2aPcOXgkHCwf0 nIedXv1F9ikdsEEHHVwgwQgfaAHeFC6QIAIJ1xyEHnX+SQTgSekgQKAELfiCjjppEMEEGNWcs04x JgxiECn8UVghRBeahE4CBdJAkClMsEaPQPNcYAAfBYkixHQvThTjSDN20MAtBJkjxRBixCOQOxlk EME6A/GTBRNEFhnRkSIliYBBxPCQxUD6yHdAPQONUYQTTGDBjJdf0pSkAQiBEoYYZpChAQgVcHEG FkUcUZYYO9L5EJgh3YlQPFQEgcQSf3qwRBJMvOVEEG0oCqOdNOKJEDFB+ABEpT8QIcSqQuhQBm+e Ov/EKEiOJiTPJ5fE54AlnnTiKybExPrpTLUqlKYGCbAprEWzfqRNqAzNkwGy4izL7E0DdCCqQtNk sEEC1Vpr4U2HNFAAQ1tM0AG44o5L0z6ANPAOPvfUa+89/PAyBwUEstvusDfds0EMMhRscMEiqEug ASv9uyhPhCRAAXcUc6cBgRs8QIfDAOOUxwUKMCDyyCIvwAAc0HEsq0/B6OLyyzDzco/KD9NMZ7M2 E6QNNg0nhE025bSEc84CzXGCHFgmlIIKQLI0NNEzMDBDOgox8AAcQvdUzi26mEfQNLjUEhQNEdCQ NEIQTCBH1jxVIoAB4RTERwEBeM0T2WYrlPbaTvf/1AoDFJREUCERHDB22WcftDfbDMHzjkLvvGMP QvxEftAtgPNT0CGFL+T4PAXt8w7olM8zr0KmV2QD4gZFrnkEahuEz+gLRT55Q0eugscWNeyhSDEF pRKIDTW80YckKfczzSFz1FBDIJRo3s88jOBBQQaJNKKII86ksgUGESyyiCKIkN4PL47swbsbhPjS Ty2HyFGDG3yIPdA9vCRCB/FxINKNQbDoA+/kEAkZTCBvA4EEHmxgAzq04gKxGwg4FCG/LfCBFgbR xSIAQbw3/EEW0ktIjOgggQYoIGQEQMRA2kEDCjTAhAxowAEOIRBYjOCFJmvABF4gkHAUIAIdyNgC /xKQAUh0AIhKWoACBrCSVsBABDhcQAQgQAIbZGABWIQABC4QiYEsYgIKgOEDHjCCZxBkDxQYIxYb sB0EzsMGEoDAA04IgQ1QgG/9AEcI5BiyBlxgENKjxAxC8ICSjXECG1PIhRqhAAq8oBGMcAML3NcP aoQgAhQQAR0YEYgXlEAX/aCExChQA0YQYgQUiIAK7DEPFZxgWjCAwQpq0Io3iEA7MYDBC0SAjn4k YgEYEAENDoEIGFwgA/ySASASYcVMBkMgvnjQGxZhiBmAj4cCuQMwM2CDRAhiBhm4QN7uMYMHXGAD b2BEHl6ATL6BIwMSwMAMJjGIE1CAAYUQCCIUEP/MGgiCEW8AAQYU4AhFKuQNE0MIHiJwgRqESyDR qIgC4NkIgsxhAhAAhEB0ATiDJKJzBamFHFVBEDikkaQDQSMEIDGQWwhOIHqQQAmA0Q9fLACZoBwI 3rD0iAdgYAXPHAjs+MaHCGBPgia4QATilogHhMB+AuHFAzIgA4MmpAbXOwg3JoCBDWzjIImAQASa NpBsmIACJshGP/4WuIIQznAhhQADcrrRBSyJILrQAATyiZBGSGADGCRhBGhIkBqUrR39wKoEKlGQ ofaDGy+QQFUJ4ggINKCLiWiACIBHEBpgIANWRQgjdDiDngkEEg2gwBwQ0kIKBNWiFFCA2GIBuJf/ CuStBhHpXAkSjXuugiDwEAEEAnGQdxxCBFWCRT8ggKyKdLZs7ugHAzIwAYMsTqqDNYjE1pZZEfyi IHdQV2gPMo8YwK4BbsDFQPhQQgy2DgY7/F9BKgsBRvSDtm0dHEgJolu6VrIEC2gFQd6xRxUJBBuO MNoBFjAB7WBwoiYwCN7eAQ8EYMBGBVmcLm4KAzrI4cNz2NcFqtrd7xKkDuIV4ULQMQgFREACEdgD YsO7gNcS5B4xkEANEieQWjQAAhXFr237gdu47nYg1CBBgAdcYIEowgQhQwAD3jAH7YhtuiyQcNnm MQ0FXMAG1o0dRzsQ2xOaOQILILFmTTwQOqQY/yFg8kYetqixfgwiAg/4rUHmAd8XyJcgj5BjkGvr 1v0OpL8ESfKSB0JgCKioFQuA4Bx0AbpUfFa5ExWBlmnwjn0YQJ5hXpsu+GkDRRzi1KguBAZLXBA3 d2C8C4lGCDJwAG5gjpQIweoEKAlbBsyW0PqFK3/l6l9FC5jRTR4BBhoA1VBeT7mzPsBDBYK36G4g AxAIdU0nIAGygnXNrX7zQZoVBxfSYh4b+CyvCRLWsRZkG2c1QYTY6pFg55bYiVbysQXSaBUVQFsF kcSzfanDRA7EsHmzA+xUSJDFrWMGEjiBaQvCaoK4GtYLseYBQBkvDJjAGQc5ALYZ2+YJNOAPAv+B NAWGURBBRCABdusxvpGsbyY7uh8TyAADbAyLS/dDHBQwUBcHsrq83YKhHfAv7FbbD0Q8gAJbcK5H wW1xcRvkQnt4wBxS8YgYUEACMJjZPt7gxwVswRGIoEEClAuLLTJABo4YRCofUAPS0cKPKoAEIkSQ iH7ogogmcMQhNMBYRNN80fxuMiIYoIEG2KAR+hMBd46tCwpMYAEmQIQhapDUFqi1H42AAAUQIANG DGIGIxgx0RsQRzs4whA2WIByCe7dcL9axQnZgMlCBgEFmIAXWSLhGEXWAAMYQiCSEAEDImC1CDSA 0wOBRw10GMMDvKEf90BBaqtvo1YUgADNhgb/BQZAcoG0IwIF0A8+7vCAKRIfAgugwL5vwQIFWLYB L1ZAB5IHCREsQK7t93JZxiNvgGdyFUMFoFH9YAgFIAHAV1IH8AAYRxDFoAh04Eo2QAnTJhDAkAg1 cAIvMAerEDc95IEokAJ2QAtS10OCQAKuRAf20w16sDQvcAdMgg2MoAh/1g/t8AiKkDz9gA+PsAh0 xQt7IANLYwOF0ArTYD79EA6rMAcskAIyIAepgA0xlw2R8AYnkAIzoAe08FUEwQuDYAIq8AJ1QAkN 4wuL8AgTVwuNUFC4RzQV8jR0aBR2eIdCkYd66BN8uBHrYEZ5FFTYgCX84AszIw7YwIHO9Q6x/7AK i/gMt1AL4MAN0SAQ68ByuhA285ANKzEP1/AMuuALt6ANA6ELqyBfvlAJDwgMk7MO39APuHAL7+AO //MO0sAOESKJvFAL7gAP0ABR1XIP01AMuECK75ANrGATc4gTrRABAuEHKkBtd9AP64ABNPQIftAP 7/AA6jUPNDAH9NMPMaAIhfAMh9ACcVMHNdAPFMAIhbAOhpAC/fALd7AKfwADgEBT/aAIMXAHbmAP i0ADfDAD9iUCx1cLjKALGPAGtXALfacLcNAKGkULfCADh7AOjLACoNM8lQQHqVAIJlAIw3ACNaCA cNYTq1AAtQCOWaYLfzAC82APFGADzlAJeP9AZHGwWoUgCARxe/1wCAmAQQjgBv2gaU4mAY+QDVhz DW+AWP2wDxQwOfAwDTVgE9QwAvwwAxEgDbrACIawBzVEQ7rgBqsglv1wDVjTDyFQB8pVhpGwDjYC DyvQD9iAASGUkjwRCYcgA4/wB2sDB49QBzQkAt5QA4lACPyQAc7wAt4AB2IDAxIQDjPQAvunCB5k CG+gHwYgA6CVCLyQApGwMdjwlAKRDZPVD89gcCxwD3BACyqAC31nAx0QNirEC1vQCk3DlP3wCDYw CVuwgLcwArgAZu9Ql75EAsTVjDfhCLXwBjKgC3PQSoMACG9wDRvQD4RgAolQCd00A44QCe3/2A8w UA4jMBCGkAh7sGtrM40CcQjBEAxaZ5dvcDYZYBO0EAwzAEq+YAL7YAPvsAgU4AjrwA+HAAe6cH2N 4AeqQAinuTYzAAiHYALtUAjTAAwQsFrHqTnTgA3QyJw04Qiq8AtgJgeO4KD9MAeSEAICkQJ+MAfu Mwwt0A94oAItkJMzAAMqgAiH4AitQAfhgDUIMAMmsAoL2Q+AYCOleTa6IAMqIAL30KQvIAPAVwMR wgKPEAwq0AECBgcpwAL7kAod0AJ3EAx34AvjmQh9kAjuQwfXd5zcuAUd4JMg2oeMsRZ2Ghxfkae0 IRV8ehpO8aeaoRSCyhhFUah5ARSImhY7IrGoXcGMjvoUMRGpTzFxlGoUQ3apQ1FvmnoUK9ipoNqH AQEAOwAAAAA= --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image002.gif Content-Disposition: inline; filename="image002.gif"; size=1002; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhGQARAIcAAAAAAACs7QGs7QKs7QSt7Qeu7Qmv7Qqv7Qyw7Q6w7g+x7hGx7hKy7hOy7haz 7hi07hu07hy17x217x617x+27yC27yS37yW47ye47yi57yu68C+78DK88DS98DW98De98Di+8Dq+ 8UHB8ULB8UPB8UfD8kvE8k3F8mHL82PM9GTM9HTS9XXS9XfS9XzU9X7V9YXX9pXc95fd957f+J/f +KPh+KTh+Kfi+Kji+LLm+bXn+bjo+rvp+rzp+sDq+sXs+srt+83v+9Tx+9Xx/Nvz/OH1/OP1/eT2 /ef3/fH6/vL6/vL7/vP7/vb8/vf8/vn9/vv9/vz+/v3+/gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAAFMALAAAAAAZABEA AAjDAKcIFJhkoEGBTVxECPBghZIoPYQYjLIByEGBT0YE2LjRAgUPTgwWCZAgx0UZHFMeQAHD4BEB AQSoQGKwRMqUJ5oYlKKB4wEVPJZM+XBzowQoB6PoIHCzgAUFRQNguEikQ4aoWElchDIBK1YWF6fU gOn1Zo+wU2Y0KMuRQhS0NEYMYBsgBtopRxzQ5fDk7pQhIchGVTDE70AbBqIi8HHXiRMjOEwITnkh iN8dICanXPCCieEpUn60EFGBAQQPKW4IRRsQADsAAAAA --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image003.gif Content-Disposition: inline; filename="image003.gif"; size=1144; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhFQARAIcAAP9fAf9gAf9gAv9kB/9nBv9nB/9lC/9mC/9pAf9pBf9qBv9uBf9oC/9rCf9r C/9oD/9sC/9uCP9nEv9qE/9sEP9uF/9sGP9zBv9wCf9xCP9yC/9zDP91CP93C/90DP95DP9yEf93 E/9wGP5yG/93H/95Ev99E/98F/96G/96HP99GP99H/9/Hv51IP95IP95If95Iv96IP98If9/Jf+C Hf+CIP+AJv+BJ/+GJf+CKP+DKP+FKv+FK/+IKv+JK/+LKv+ILP2HMvyNP/+RN/+VNP+UNv+QOP+V Ov+WOP+WPP+YOf+ZOv+ZPP+aPv+aP/+bP/+cPPaLRPeNQfWOT/yPQP+XQv+ZQf+aR/+dRv+bSP+b Sv+cSf+dSf+dSv+fS/OWVO6eav+iRP+gSf+hSf+gSv+gS/+iS/+kSf+nSf+kTf+lT/+pS/+oTP+s TP+sTv+iUf+jUv+kU/+mUf+mU/+kVP+lVP+mVf+nVf6oU/+oVv+pV/+qV/+tUP+tV/+pWPyoXP+s Wf+uWv+vW/+wVv+xXv+zXf+0Xv+0X/+1Xu+iaOejeeekee6ic/Kkbvena/qtbfGpcP+2ZP+6bPez e/u2dPm1et61nNm7qOSqheazkOK5mPa5hvK5iPS8j/m8hOO7od7Mvv/FgvjEjPPDlujRu/PFovXO p/bPrvXXu/PYu9TPydLQzdPRzt3RxtDU19bX2M/a4s/d58nb6Mrd6crc68re683g787i78jh8sni 8tHi79Pj7tXi6Nrh5dnl7djl79Hj8dnn8tnn9Nzn8dnt+t/s+N7t+t3w/9/x/+LNweHQwOnUwOzU xu/YwOzg0+/j2/Lo3f/i0//j0//v3f/w3u/q5Ofv9Onu8eDx/+Px/eLx/+Pz/+fz++f0/Of3/+jx +uj0/un3/+34/+z6/+75/+7///Lp4PDt6/H4//D7//D//////wAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/ANcJXCfNTBo1CBMmTOMnzZxoA9eNQeSmDZ9BhQ5p1GgokqRQYiKWWWMOWipRbND0EcRSUKBA hMhE9BIGnTpy4rw1w3Nmj0+fgLxE7CKHkidT1cJ90zYKyp08UPV0icjFzhMmTZT8cZat2LIlcerU sZMl4hYsqE5VOuKEyCZsw0gheQOHjpaIRn6kKzcOXKciVh4dE8YpyZUqQyL6oDGp1LVtxpR9MAFJ l60aOHr4iAiEB4sTFxwh+wWqA4dWsTSp4AEk4o4bKzRs8BCEGLBEIajcolXCxo6IOlII4RZMSoZG u2BhWPBK1hcUOiLmUHDOWi9XERDwqhUlQqZZmEDkUYg4g8Czbr5UNYDwKdeiBGBwXXIwI6KMCiOY JWshggIjVooUMMUqljAgQ0QxSDABAAJMYIEFBgRwgAUPBDCABC9ENI0LJMDg4YcgwkCCC9QEBAA7 AAAAAA== --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image004.gif Content-Disposition: inline; filename="image004.gif"; size=1130; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhFQARAIcAABA9oCFFmixMli9OlClLmS9RnzBQlzJSnDNUnzVTnDVVniFJoiVPryhStClU uixYvjBTpjNUoTRVoTRWpDVXpzJWrDZYpjVYqzZZqjZaqDdaqjhYozlapzpbpjtbpzpcqjpcqztd qjhcrThcrzlcrjtfrDxfrDxfrTddszlcsDhdszletDxfsDheuDxgrj1grzdhvjxhsT1hsT1isz5g sz5hsz5isz5itD5itT9jtD9jtz1mtT9ktzpguDthuzpiujtivTxjvj9kuD9mvC1axDZjzT1kwj5o xj9oykVkp0BkuEBluEBku0BlukBlu0FmvkFnvkFnv0BpuEJov0ZquUhqtU9vskttukpuvUxvvV50 qVNwsl97tlh6u2B2qWF6tGR9s2Z9sGV+tmd+tGd/tWZ+uUJowkJpwkNpxkNqxUJqx0RsyUptwU1w wU5zxlN2yVl8wFp9wlt+wWeBumeEv2iBuGmCumiBvmqBvGqDvV+AwV6Awl+B1F+D12CAwWGDw2KD w2CExGWFw2WFxGWFxWWHxWaGxGeHxGeHxmKGymeGzGeJxWeIxmSIy2eKzGiFwmiGy2iIxWmIx2iK yW+JymyMyGyMyW2MyG2NyG2NyW2Oy2aH02SI3GmI0GqJ0GqK1GuL2GyO3W+Qz3GKx3CN0HGSzHuX y3iVznGR0HOT0HKQ1XqZ0H6b0X+d0n6d1H+c34KbyoWczImdy4idz4qdzY2iz4Kg1oqj0oug1I2k 1I2m1Y+n1o+p1pCo34mj4ZCp5JCr6Jmz4pqy4Z204Z624qW53qm936q/3qW87KW87aq/4ay+4b3I 4L/L5bzT/L3U/cPO5cPQ6czW6czW7M3Y7NDa7dPc79bg8Nnh8t7l8uLm8+fr9ebr9ufr9+js9uvu 9/Ly8vX3+/f4+/f5/Pj6/P///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/AMsJLAdOGTJiwxIqVEgs2TFwA8stc2YLVaqLGEU5apTI1TNjEYWx0lSqpMlJq6JZy9ZqVbCI vBhZypQJ06VKjE5F3BVIV8RcgCIdOoRokSQ41wSOq2bKz62IsQQZOjTIECE5Ur4J/LNjTyFYEb0M SGKli544xaaRE0gNGxcBWiKGMZBAAQIJAZhFFPiFAJiIYw5s6OABBIRazcQJhCZtSwExEclE4BDi xIsYFQBoE0hiAQYLZSLWmfDBhAwbOXgw2CbwyggXGuZEtEOhhIwaPJoMacBNYJYVM0TciYgnA4sb QphAmeLAm8A2PXCkoBMxzwUaOpxEOZPmQTeBbnwsQ0HxKOKoKiqUPDGDZg2RcALfBPmBhVJEWr+o tABi5AiSIq/40osaMLABzCwRgSMLKZAo0sknoITCSR98bOKJKriAExAAOwAAAAA= --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image005.gif Content-Disposition: inline; filename="image005.gif"; size=1060; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhFgARAPcAAAA7fQBLhwBMiABOiQBPighUjAhWjwtWjQtWjgxWjgxXjg1YjwtYkAxYkQxZ kQ1ZkQ9ZkBBbkhRakBZekxdekhhflBhglBlglBpilxxnmBloox1spx16qR97qiFuqiJwqiJwqyVx qSVxqiVzrCZ/rCpxoih/qyV4tCp5tip7ti5/tCh8uCeArSuBriyCri6Dry6AtDWAqjGAtzCCtzKD tzCFsDKGsTaDtzSHsTeIsjeJsziDuDmKsjuLtDqMszqMtD6MtT6OtD6PtkCOtkKPtUWJvEaKvUSS t0SUu0aUuVKHrlaIr1WJsFeKsVmLslqLs1uNtF6PtVeXvGCQtmqbvW+avHKdvXOdvnSdvnaev0aQ ykuSx0iSy02TymOfwGWfwGqlxW6ryXigwHmgwHmhwHujwXujwnukw3yjwXmoxnqpxXuvy36yzYam vomnvoGnxYKnxYWqx4msyI6wyo6xypOuwZK0zJiww5m40JjC17DP37PR4bzX5MTb6MXb6Mjd6Mzg 6tXm7/P4+fz8/f/+/v/+/////v///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAFgARAAAI/wAPCRTY houRIggTKixiRIubgQK7qPHypaLFi1+8pNkC8dCNHzo6cLDRo6RJkz52dFQRBIhAMDmGyJwpk4iM jjB4rBHY5wVNmkdodJyRhEUePTVwuHDRwwWJFkKQxBjRUUMGKXz2sAnzB5AJP4IClUggwUPHDQeW CMRDpaPAARM+nF3AROCcJwOvGBI4RYFciBvoCqQDReAZAGIEminwd2DguocIC3wTAItAMoznQpZ8 CE6ALJczA17QRKCdKALjBBgjEI1oxxCUHBokx8khQmUIVDlUyAqCxgI3XIggQICBB8UZYHBQvIEF EB1PUKhAvbr16hRWdKyDQkSI7+DDhwUQkeJOQAA7AAAAAA== --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_ Content-Description: image006.gif Content-Disposition: inline; filename="image006.gif"; size=1104; creation-date="Tue, 09 Oct 2018 23:20:58 GMT"; modification-date="Tue, 09 Oct 2018 23:20:58 GMT" Content-ID: Content-Transfer-Encoding: base64 R0lGODlhFQARAIcAAACv8AGv8ASw8AWw8Aax8Aix8Amx8Amy8Aqy8Auy8A+z8BC08BG08Ra28Re2 8Ru38R248R648SG58SO68iW68ie78iq88iq88yy98i2+8y698jC+8jO/8jS/8zfA8zTA9DbB9DfB 9DvB8znB9DzC8z7C80LD80LE9EPF9UTE9EXE9EbF9EbG9UrG9ErG9UrH9UvG9EzG9FDI9FLI9FPI 9FPJ9FPK9lfK9VfM9lrL9VvN913M9V3O91/N9V/O92HN9WPO9WPO9mPP92XO9WjP9mPQ+GjQ9mnQ 9mrQ9mvQ9m/R9mjR+GrS+G3T+G7S+HDS9nLS9nPS9nPT9nbU9nbU93HU+XjV93nU93vV93zW933W 93/W93nX+YDX94HX94LX94LY94PY94TY94XY94bY94bZ94fZ94TZ+IXZ+IjZ94na+Ina+Yva+Izb +I7b+I3c+I7c+Y/c+JDc+JHc+JPc+JTd+JXd+Jnf+Zrf+Jrf+Zvf+Jvf+Zvg+Zzg+aDh+aPi+aXi +aXj+afj+ajj+ark+qzl+q/l+r/r+9Lx/NPx/NTx/Nz0/N30/d70/eP2/ef3/e35/e75/vD6/vP7 /vj8/vr9/vv9/v3+/v7+/v7+/////wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/ADUJFFjpDpIZP8aw+WIGEKSBEAkqiUKGjpgnRHbUULEBy6SIAu9E0aNnjpgpRHLEKIEBAgdH IJOQweOmyxE2gwrVkeEAQQALHyHSiCMnzJNGmi5R0oSpD4EBAqBE7PGFjZZBmhDB6JDjoYgJFAw8 HAiGitVDmg61aJHiRpYSKmAw+AOxTZY5afJk0vTIUBYPEhwsOBBACsQyXvbYCdOF0UBJVwIAmAwE IhsvW0wgmFzhRp6lQyYDMDwwkIPJK+40ED1HkyDRRCBCMjBZjaZEHgpoUKSJjegHEaUkWBABLcRF FRYsULAg4iQSF0B8CHKHkB8rI0Joz3ACpCMXLGzwKRhPfrwOFHZAapqE5kURJvCXVOHSxIcRS+oF RhoEZ82bM0Lg4AQf+AUEADsAAAAA --_009_308BB4C7C739491C81F0CA869146C3A7scottmaddencom_-- --===============8879086381214875777== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============8879086381214875777==-- From mgs-bounces@autox.team.net Wed Oct 10 06:49:59 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id 4C97D2587F85 for ; Wed, 10 Oct 2018 06:49:59 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from mail-ot1-f47.google.com (mail-ot1-f47.google.com [209.85.210.47]) by autox.team.net (Postfix) with ESMTP id 0E11025888D4 for ; Wed, 10 Oct 2018 06:20:44 -0600 (MDT) Received: by mail-ot1-f47.google.com with SMTP id u22so5074388ota.12 for ; Wed, 10 Oct 2018 05:20:44 -0700 (PDT) h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=vixmb/FY1yPNJ2QgEMldpaO/QspPRBk265j9JIunsdc=; b=ejJGHrg9iX8a9GM6eTA3VVRBnTVhVZI//5WaUBTB8PH0eR6mLc3mtZgwIcdrt1zUZN irTLW2Q8Jv7TVGhX91Emh2n20hAwi8FpZFyPMUgz+7YBolVyW6Rew2oeoemMJsHUw7HL 2ofucT1ifNj6aOHE5yfq+nlaMzJuGtL5UtxSPyeuOcNuhc9p6xHclmCjxcnM9NQVyhZG +4bBMCVfk1HJICh52wk20tdTQgxcbw/VfYBqTHsvnwld2Q6tg1FaDP3QHH+fd1Z85gnE xJYVZc81eAPxr8ckbaqQWbKB7JLJljuAsuFgNEWm7MkfZpxLsTy0CB4U3Y5aauGPlrzc w5kg== d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=vixmb/FY1yPNJ2QgEMldpaO/QspPRBk265j9JIunsdc=; b=p5K/hf18Tct66tsrRXb/cMw5lYlYNxKbnoVxho9K59NWEL23KQOC7ex4VJ3wBfImfl 87u5OgNP73csz9mQlsVEu5u+j14sQcKWV7ipqkT+AjV176iUZHg4b/EEFi6jRQbLB9Qa YXnYFHxulYBDKW80PaReWcrD1dx4I+bClFksLhXjyJcdGzwA6YfXVdiippEIm+him1xE vSzLQ+Fal4AFgDw0V+MPLJiIusSG8yN01hMXpKIjpsq4hBc9mstR6H2iqA2yzEtZww1K O6UKuJhbzPq5YnJBgbLMToWkp+g5lRJz//t4QxRSISQURmFfNyIfZ2lROIWrr6ftG1A8 GAVQ== X7JSIk6atF+0yoqa+BQ3yJDpzFwTD7oP22IjYGI= Wed, 10 Oct 2018 05:20:43 -0700 (PDT) References: <639797051.7127494.1539112833314@mail.yahoo.com> <308BB4C7-C739-491C-81F0-CA869146C3A7@scottmadden.com> Date: Wed, 10 Oct 2018 08:20:06 -0400 To: RStarkweather@scottmadden.com Cc: mglist Subject: Re: [Mgs] Fw: Hot B motor From: Dan DiBiase via Mgs Errors-To: mgs-bounces@autox.team.net --===============3282779162329227793== --00000000000017750e0577dee279 --00000000000017750b0577dee278 I suspect they'd be okay with the free publicity and recommendation, Rick.... ;-) Dan D '76B, '65B Central NJ USA http://dandibiase.cbintouch.com/ On Tue, Oct 9, 2018 at 10:59 PM Rick Starkweather via Mgs < mgs@autox.team.net> wrote: > My apologies to Hap, Peter and Dave: > > > > I thought this question came from my local MG car club message board so I > provided a local solution. > > > > Rick > > *Rick Starkweather* | Partner > 2626 Glenwood Ave., Suite 480 > Raleigh, NC 27608 > O: (919) 781-4191 | M: (919) 345-9871 > F: (919) 781-2537 > > [image: signature_992300732] > > *website **|** bio > **|** vCard > * > *|** map > * > *|** email **[image: > signature_756695260]* *[image: > signature_1569469872]* *[image: > signature_1094126481]* *[image: > signature_2099890505]* *[image: > signature_156955328]* > > > > > > *From: *Mgs on behalf of Zach Dorsch via Mgs > > *Reply-To: *Zach Dorsch > *Date: *Tuesday, October 9, 2018 at 7:15 PM > *To: *Mglist > *Subject: *Re: [Mgs] Fw: Hot B motor > > > > To name a few: > > > > Hap Waldrop > > http://www.acmespeedshop.com/ > > > > Peter Burgess > > http://www.mg-cars.org.uk/peterburgess/indexstart.html > > > > > > Dave Headley > > http://www.fast-mg.com/ > > > > On Tuesday, October 9, 2018, 11:28 AM, Ron Sanborn via Mgs < > mgs@autox.team.net> wrote: > > > > > > *From:* riverside@southslope.net > > *Sent:* Monday, October 08, 2018 4:12 PM > > *Subject:* Hot B motor > > > > I am helping a friend build an MGB motor for > > autoXssing and track days. We are looking for > > sources of high performance parts and guidance. > > Any advice or knowledge you can share would be > > most welcome. > > > > Thanks! > > > > Ron Sanborn > > _______________________________________________ > > > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/mgs > > Unsubscribe: > http://autox.team.net/mailman/options/mgs/herr_dorsch@yahoo.com > > _______________________________________________ > > Mgs@autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $12.75 > > Archive: http://www.team.net/pipermail/mgs > > Unsubscribe: > http://autox.team.net/mailman/options/mgs/dan.dibiase@gmail.com > --00000000000017750b0577dee278 Content-Transfer-Encoding: quoted-printable
I suspect they'd be okay with the free publicity and r= ecommendation, Rick.... ;-)

Dan D
'76B, &#= 39;65B
Central NJ USA
<= a href=3D"http://dandibiase.cbintouch.com/" target=3D"_blank">http://dandib= iase.cbintouch.com/


On Tue, Oct 9, 2018 at 10:59 PM Rick Starkwea= ther via Mgs <mgs@autox.team.net> wrote:

My apologies to Hap, Peter and Dave:

=C2=A0

I thought this question came from my local MG car cl= ub message board so I provided a local solution.

=C2=A0

Rick

Rick Starkweather=C2=A0|=C2=A0Partner
2626 Glenwood Ave., Suite 480
Raleigh,=C2=A0NC=C2=A027608
O:=C2=A0(919) 781-4191=C2=A0
|=C2=A0M:= =C2=A0(919) 345-9871
F:=C2=A0(919) 781-2537

3D"signature_992300732"

website=C2=A0|=C2=A0bio=C2=A0|=C2=A0vCard=C2=A0|=C2=A0map=C2=A0|=C2=A0email=C2=A0=C2=A0=C2=A03D"signature_7566952== 3D"signature_1569469872"3D"signa=3D"signature_2099890505"3D"signature_156955328"

=C2=A0

=C2=A0

From= : Mgs <mgs-bounces@autox.= team.net> on behalf of Zach Dorsch via Mgs <mgs@autox.team.net>
Reply-To: Zach Dorsch <herr_dorsch@yahoo.com>
Date: Tuesday, October 9, 2018 at 7:15 PM
To: Mglist <mgs@autox.team.net>
Subject: Re: [Mgs] Fw: Hot B motor

=C2=A0

To name a few:

=C2=A0

Hap Waldrop=C2=A0

http://www.acmespeedshop.com/=C2=A0



Peter Burgess

=C2=A0

Dave Headley

http://www.fast-mg.com/=C2=A0

=C2=A0

On Tuesday, October 9, 2= 018, 11:28 AM, Ron Sanborn via Mgs <mgs@autox.team.net> wrote:<= /p>

=C2=A0<= u>

=C2=A0

Sent:= Monday, October 08, 2018 4:12 PM

Subje= ct: Hot B motor

=C2=A0<= u>

I am he= lping a friend build an MGB motor for

autoXss= ing and track days.=C2=A0 We are looking for

sources= of high performance parts and guidance.

Any adv= ice or knowledge you can share would be

most we= lcome.

=C2=A0<= u>

Thanks!=

=C2=A0<= u>

Ron San= born

_______________________________________________


//www.team.net/donate.html

Archive: ht= tp://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/mailman/options/mgs/herr_dorsch@yahoo.com<= u>

_______________________________________________

Mgs@autox.team.net<= /a>
et=3D"_blank">http://www.team.net/donate.html


Archive: http://www.team.net/pipermail/mgs

Unsubscribe: http://autox.team.net/ma= ilman/options/mgs/dan.dibiase@gmail.com
--00000000000017750b0577dee278-- --00000000000017750e0577dee279 Content-Disposition: inline; filename="image001.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff4cdccc1> R0lGODlhowBaAIcAAAAAADU3OTs8Pjw+QD5AQkJDRUVGSUZISkhISklKTEpMTkxNT01OUE5QUlhP T1BQU1FSVFJUVlRVVlVWWFZYWl9SUVpXWVhZWllaXFpcXlxcXl1eYFZiZV5gYmZTUmtfX2BeYWBg YmFiZGNkZmRjZWRlZmVmaGdoaWhnamhoamlqbGpsbmxrbmxtbmFrcG1ucG5wcXBvcnFydHV2eHd4 enp6fH19gDyQoS6ovwCuzgOx0AWx0Qmy0Qyz0g+31h2vyRyxzBG10hW10ha21BW41hi20xi31B24 1Ry72By82S+pwSKyzCC51SW71ia81yG82CS/2yu81yy91zCqwTG92D660SHC3jfA2TvA2j3B2kGV pn6AgVG+0ma6y0DE20XF20nE20rH3UzG3U7I3lDC1VXJ307J4FDL4lrM4HbP32HN4WbO4WrR437W 54B/goKChIaGiIaIiYiHiYmKjI6OkI6QkZCPkpCRkpKSlJKUlZSTlZSVlpaWmJaYmZiXmpmZmpqa nJucnZybnJycnp6eoKCfoKOjpKamqKeoqaqrrK6usK6wsbCvsLOztLa2uLe4uLm5urq7vLu8vby7 vL29vr6/wIjO3IbT4IbX6ILY5obZ6Ija6Yje7I3a6Y/e7pbg7p7g7bnDxKLh7KXj7afk7qnk7rHo 8bbo8ci6ucC/wcHBwsLCxMPFxMTFxcDFy8HGzMfHyMbIx8bIycXKz8jHyMvLy8rO0s7O0M7Qz87R 1tLS09LW2tfW2Nfa3tnZ2tvb3Nzc29zc3dre4d/f4cLr8t7g4N/i5dDv9dHw9dfx99ny997z9970 99jz+ODg3+Hh4eLi5OTj4+Tk4+Xl5ebm6ODp7Ofq7Ojn6ejo5+np6evr7ers6+vs7Ozr6+zr7Ozs 6+3t7e/v8O7w7+H1+Of2+u/w8O/4+/Lv7vDv8fDw7//x7vHx8fHz9PTz8/T08/X19fb2+PH6+/L6 /Pf4+PX9/vz29Pn49/j4+fr6/Pr+/v/7+Pz8+/38/AAAAAAAAAAAACH5BAEAAP0ALAAAAACjAFoA AAj/APsJHEiwoMGDCBMqXMiwocOHECNKFIhvosWLGDNq3IgQHsePIEOKxMhupMmTKE2CS8mypUuI 1l7KnEmTGs2bOE8ay8mzp0ZhPoMKfdhrqNGjBnchXXo0F9OnQW0dXdPEidWrV5l8SQa15SyjaIJg HWv1CBNkXVO+GnrqSFUnR4L0mEt3bg42aVG6GrpJiNUiYE4tU0a4sLJxmq40yztyr9BMQ5wYUbOw 1A4hxxiHdBw0k5EmUcYtHBVksmaQnH16PjJG3uggTLyQO80xdU9ORo6YyfeaSRbRtDXaljmtFaRI kVB1SfKkSqhpCkn7Bh4c43CXdTRkwMC9wg0rUHBw/9CQZx9C6b+rZ7zO0o8CDRs2aPcOXgkHCwf0 nIedXv1F9ikdsEEHHVwgwQgfaAHeFC6QIAIJ1xyEHnX+SQTgSekgQKAELfiCjjppEMEEGNWcs04x JgxiECn8UVghRBeahE4CBdJAkClMsEaPQPNcYAAfBYkixHQvThTjSDN20MAtBJkjxRBixCOQOxlk EME6A/GTBRNEFhnRkSIliYBBxPCQxUD6yHdAPQONUYQTTGDBjJdf0pSkAQiBEoYYZpChAQgVcHEG FkUcUZYYO9L5EJgh3YlQPFQEgcQSf3qwRBJMvOVEEG0oCqOdNOKJEDFB+ABEpT8QIcSqQuhQBm+e Ov/EKEiOJiTPJ5fE54AlnnTiKybExPrpTLUqlKYGCbAprEWzfqRNqAzNkwGy4izL7E0DdCCqQtNk sEEC1Vpr4U2HNFAAQ1tM0AG44o5L0z6ANPAOPvfUa+89/PAyBwUEstvusDfds0EMMhRscMEiqEug ASv9uyhPhCRAAXcUc6cBgRs8QIfDAOOUxwUKMCDyyCIvwAAc0HEsq0/B6OLyyzDzco/KD9NMZ7M2 E6QNNg0nhE025bSEc84CzXGCHFgmlIIKQLI0NNEzMDBDOgox8AAcQvdUzi26mEfQNLjUEhQNEdCQ NEIQTCBH1jxVIoAB4RTERwEBeM0T2WYrlPbaTvf/1AoDFJREUCERHDB22WcftDfbDMHzjkLvvGMP QvxEftAtgPNT0CGFL+T4PAXt8w7olM8zr0KmV2QD4gZFrnkEahuEz+gLRT55Q0eugscWNeyhSDEF pRKIDTW80YckKfczzSFz1FBDIJRo3s88jOBBQQaJNKKII86ksgUGESyyiCKIkN4PL47swbsbhPjS Ty2HyFGDG3yIPdA9vCRCB/FxINKNQbDoA+/kEAkZTCBvA4EEHmxgAzq04gKxGwg4FCG/LfCBFgbR xSIAQbw3/EEW0ktIjOgggQYoIGQEQMRA2kEDCjTAhAxowAEOIRBYjOCFJmvABF4gkHAUIAIdyNgC /xKQAUh0AIhKWoACBrCSVsBABDhcQAQgQAIbZGABWIQABC4QiYEsYgIKgOEDHjCCZxBkDxQYIxYb sB0EzsMGEoDAA04IgQ1QgG/9AEcI5BiyBlxgENKjxAxC8ICSjXECG1PIhRqhAAq8oBGMcAML3NcP aoQgAhQQAR0YEYgXlEAX/aCExChQA0YQYgQUiIAK7DEPFZxgWjCAwQpq0Io3iEA7MYDBC0SAjn4k YgEYEAENDoEIGFwgA/ySASASYcVMBkMgvnjQGxZhiBmAj4cCuQMwM2CDRAhiBhm4QN7uMYMHXGAD b2BEHl6ATL6BIwMSwMAMJjGIE1CAAYUQCCIUEP/MGgiCEW8AAQYU4AhFKuQNE0MIHiJwgRqESyDR qIgC4NkIgsxhAhAAhEB0ATiDJKJzBamFHFVBEDikkaQDQSMEIDGQWwhOIHqQQAmA0Q9fLACZoBwI 3rD0iAdgYAXPHAjs+MaHCGBPgia4QATilogHhMB+AuHFAzIgA4MmpAbXOwg3JoCBDWzjIImAQASa NpBsmIACJshGP/4WuIIQznAhhQADcrrRBSyJILrQAATyiZBGSGADGCRhBGhIkBqUrR39wKoEKlGQ ofaDGy+QQFUJ4ggINKCLiWiACIBHEBpgIANWRQgjdDiDngkEEg2gwBwQ0kIKBNWiFFCA2GIBuJf/ CuStBhHpXAkSjXuugiDwEAEEAnGQdxxCBFWCRT8ggKyKdLZs7ugHAzIwAYMsTqqDNYjE1pZZEfyi IHdQV2gPMo8YwK4BbsDFQPhQQgy2DgY7/F9BKgsBRvSDtm0dHEgJolu6VrIEC2gFQd6xRxUJBBuO MNoBFjAB7WBwoiYwCN7eAQ8EYMBGBVmcLm4KAzrI4cNz2NcFqtrd7xKkDuIV4ULQMQgFREACEdgD YsO7gNcS5B4xkEANEieQWjQAAhXFr237gdu47nYg1CBBgAdcYIEowgQhQwAD3jAH7YhtuiyQcNnm MQ0FXMAG1o0dRzsQ2xOaOQILILFmTTwQOqQY/yFg8kYetqixfgwiAg/4rUHmAd8XyJcgj5BjkGvr 1v0OpL8ESfKSB0JgCKioFQuA4Bx0AbpUfFa5ExWBlmnwjn0YQJ5hXpsu+GkDRRzi1KguBAZLXBA3 d2C8C4lGCDJwAG5gjpQIweoEKAlbBsyW0PqFK3/l6l9FC5jRTR4BBhoA1VBeT7mzPsBDBYK36G4g AxAIdU0nIAGygnXNrX7zQZoVBxfSYh4b+CyvCRLWsRZkG2c1QYTY6pFg55bYiVbysQXSaBUVQFsF kcSzfanDRA7EsHmzA+xUSJDFrWMGEjiBaQvCaoK4GtYLseYBQBkvDJjAGQc5ALYZ2+YJNOAPAv+B NAWGURBBRCABdusxvpGsbyY7uh8TyAADbAyLS/dDHBQwUBcHsrq83YKhHfAv7FbbD0Q8gAJbcK5H wW1xcRvkQnt4wBxS8YgYUEACMJjZPt7gxwVswRGIoEEClAuLLTJABo4YRCofUAPS0cKPKoAEIkSQ iH7ogogmcMQhNMBYRNN80fxuMiIYoIEG2KAR+hMBd46tCwpMYAEmQIQhapDUFqi1H42AAAUQIANG DGIGIxgx0RsQRzs4whA2WIByCe7dcL9axQnZgMlCBgEFmIAXWSLhGEXWAAMYQiCSEAEDImC1CDSA 0wOBRw10GMMDvKEf90BBaqtvo1YUgADNhgb/BQZAcoG0IwIF0A8+7vCAKRIfAgugwL5vwQIFWLYB L1ZAB5IHCREsQK7t93JZxiNvgGdyFUMFoFH9YAgFIAHAV1IH8AAYRxDFoAh04Eo2QAnTJhDAkAg1 cAIvMAerEDc95IEokAJ2QAtS10OCQAKuRAf20w16sDQvcAdMgg2MoAh/1g/t8AiKkDz9gA+PsAh0 xQt7IANLYwOF0ArTYD79EA6rMAcskAIyIAepgA0xlw2R8AYnkAIzoAe08FUEwQuDYAIq8AJ1QAkN 4wuL8AgTVwuNUFC4RzQV8jR0aBR2eIdCkYd66BN8uBHrYEZ5FFTYgCX84AszIw7YwIHO9Q6x/7AK i/gMt1AL4MAN0SAQ68ByuhA285ANKzEP1/AMuuALt6ANA6ELqyBfvlAJDwgMk7MO39APuHAL7+AO //MO0sAOESKJvFAL7gAP0ABR1XIP01AMuECK75ANrGATc4gTrRABAuEHKkBtd9AP64ABNPQIftAP 7/AA6jUPNDAH9NMPMaAIhfAMh9ACcVMHNdAPFMAIhbAOhpAC/fALd7AKfwADgEBT/aAIMXAHbmAP i0ADfDAD9iUCx1cLjKALGPAGtXALfacLcNAKGkULfCADh7AOjLACoNM8lQQHqVAIJlAIw3ACNaCA cNYTq1AAtQCOWaYLfzAC82APFGADzlAJeP9AZHGwWoUgCARxe/1wCAmAQQjgBv2gaU4mAY+QDVhz DW+AWP2wDxQwOfAwDTVgE9QwAvwwAxEgDbrACIawBzVEQ7rgBqsglv1wDVjTDyFQB8pVhpGwDjYC DyvQD9iAASGUkjwRCYcgA4/wB2sDB49QBzQkAt5QA4lACPyQAc7wAt4AB2IDAxIQDjPQAvunCB5k CG+gHwYgA6CVCLyQApGwMdjwlAKRDZPVD89gcCxwD3BACyqAC31nAx0QNirEC1vQCk3DlP3wCDYw CVuwgLcwArgAZu9Ql75EAsTVjDfhCLXwBjKgC3PQSoMACG9wDRvQD4RgAolQCd00A44QCe3/2A8w UA4jMBCGkAh7sGtrM40CcQjBEAxaZ5dvcDYZYBO0EAwzAEq+YAL7YAPvsAgU4AjrwA+HAAe6cH2N 4AeqQAinuTYzAAiHYALtUAjTAAwQsFrHqTnTgA3QyJw04Qiq8AtgJgeO4KD9MAeSEAICkQJ+MAfu Mwwt0A94oAItkJMzAAMqgAiH4AitQAfhgDUIMAMmsAoL2Q+AYCOleTa6IAMqIAL30KQvIAPAVwMR wgKPEAwq0AECBgcpwAL7kAod0AJ3EAx34AvjmQh9kAjuQwfXd5zcuAUd4JMg2oeMsRZ2Ghxfkae0 IRV8ehpO8aeaoRSCyhhFUah5ARSImhY7IrGoXcGMjvoUMRGpTzFxlGoUQ3apQ1FvmnoUK9ipoNqH AQEAOwAAAAA= --00000000000017750e0577dee279 Content-Disposition: inline; filename="image002.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff5af44d2> R0lGODlhGQARAIcAAAAAAACs7QGs7QKs7QSt7Qeu7Qmv7Qqv7Qyw7Q6w7g+x7hGx7hKy7hOy7haz 7hi07hu07hy17x217x617x+27yC27yS37yW47ye47yi57yu68C+78DK88DS98DW98De98Di+8Dq+ 8UHB8ULB8UPB8UfD8kvE8k3F8mHL82PM9GTM9HTS9XXS9XfS9XzU9X7V9YXX9pXc95fd957f+J/f +KPh+KTh+Kfi+Kji+LLm+bXn+bjo+rvp+rzp+sDq+sXs+srt+83v+9Tx+9Xx/Nvz/OH1/OP1/eT2 /ef3/fH6/vL6/vL7/vP7/vb8/vf8/vn9/vv9/vz+/v3+/gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAAFMALAAAAAAZABEA AAjDAKcIFJhkoEGBTVxECPBghZIoPYQYjLIByEGBT0YE2LjRAgUPTgwWCZAgx0UZHFMeQAHD4BEB AQSoQGKwRMqUJ5oYlKKB4wEVPJZM+XBzowQoB6PoIHCzgAUFRQNguEikQ4aoWElchDIBK1YWF6fU gOn1Zo+wU2Y0KMuRQhS0NEYMYBsgBtopRxzQ5fDk7pQhIchGVTDE70AbBqIi8HHXiRMjOEwITnkh iN8dICanXPCCieEpUn60EFGBAQQPKW4IRRsQADsAAAAA --00000000000017750e0577dee279 Content-Disposition: inline; filename="image003.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff690bce3> R0lGODlhFQARAIcAAP9fAf9gAf9gAv9kB/9nBv9nB/9lC/9mC/9pAf9pBf9qBv9uBf9oC/9rCf9r C/9oD/9sC/9uCP9nEv9qE/9sEP9uF/9sGP9zBv9wCf9xCP9yC/9zDP91CP93C/90DP95DP9yEf93 E/9wGP5yG/93H/95Ev99E/98F/96G/96HP99GP99H/9/Hv51IP95IP95If95Iv96IP98If9/Jf+C Hf+CIP+AJv+BJ/+GJf+CKP+DKP+FKv+FK/+IKv+JK/+LKv+ILP2HMvyNP/+RN/+VNP+UNv+QOP+V Ov+WOP+WPP+YOf+ZOv+ZPP+aPv+aP/+bP/+cPPaLRPeNQfWOT/yPQP+XQv+ZQf+aR/+dRv+bSP+b Sv+cSf+dSf+dSv+fS/OWVO6eav+iRP+gSf+hSf+gSv+gS/+iS/+kSf+nSf+kTf+lT/+pS/+oTP+s TP+sTv+iUf+jUv+kU/+mUf+mU/+kVP+lVP+mVf+nVf6oU/+oVv+pV/+qV/+tUP+tV/+pWPyoXP+s Wf+uWv+vW/+wVv+xXv+zXf+0Xv+0X/+1Xu+iaOejeeekee6ic/Kkbvena/qtbfGpcP+2ZP+6bPez e/u2dPm1et61nNm7qOSqheazkOK5mPa5hvK5iPS8j/m8hOO7od7Mvv/FgvjEjPPDlujRu/PFovXO p/bPrvXXu/PYu9TPydLQzdPRzt3RxtDU19bX2M/a4s/d58nb6Mrd6crc68re683g787i78jh8sni 8tHi79Pj7tXi6Nrh5dnl7djl79Hj8dnn8tnn9Nzn8dnt+t/s+N7t+t3w/9/x/+LNweHQwOnUwOzU xu/YwOzg0+/j2/Lo3f/i0//j0//v3f/w3u/q5Ofv9Onu8eDx/+Px/eLx/+Pz/+fz++f0/Of3/+jx +uj0/un3/+34/+z6/+75/+7///Lp4PDt6/H4//D7//D//////wAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/ANcJXCfNTBo1CBMmTOMnzZxoA9eNQeSmDZ9BhQ5p1GgokqRQYiKWWWMOWipRbND0EcRSUKBA hMhE9BIGnTpy4rw1w3Nmj0+fgLxE7CKHkidT1cJ90zYKyp08UPV0icjFzhMmTZT8cZat2LIlcerU sZMl4hYsqE5VOuKEyCZsw0gheQOHjpaIRn6kKzcOXKciVh4dE8YpyZUqQyL6oDGp1LVtxpR9MAFJ l60aOHr4iAiEB4sTFxwh+wWqA4dWsTSp4AEk4o4bKzRs8BCEGLBEIajcolXCxo6IOlII4RZMSoZG u2BhWPBK1hcUOiLmUHDOWi9XERDwqhUlQqZZmEDkUYg4g8Czbr5UNYDwKdeiBGBwXXIwI6KMCiOY JWshggIjVooUMMUqljAgQ0QxSDABAAJMYIEFBgRwgAUPBDCABC9ENI0LJMDg4YcgwkCCC9QEBAA7 AAAAAA== --00000000000017750e0577dee279 Content-Disposition: inline; filename="image004.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff77234f4> R0lGODlhFQARAIcAABA9oCFFmixMli9OlClLmS9RnzBQlzJSnDNUnzVTnDVVniFJoiVPryhStClU uixYvjBTpjNUoTRVoTRWpDVXpzJWrDZYpjVYqzZZqjZaqDdaqjhYozlapzpbpjtbpzpcqjpcqztd qjhcrThcrzlcrjtfrDxfrDxfrTddszlcsDhdszletDxfsDheuDxgrj1grzdhvjxhsT1hsT1isz5g sz5hsz5isz5itD5itT9jtD9jtz1mtT9ktzpguDthuzpiujtivTxjvj9kuD9mvC1axDZjzT1kwj5o xj9oykVkp0BkuEBluEBku0BlukBlu0FmvkFnvkFnv0BpuEJov0ZquUhqtU9vskttukpuvUxvvV50 qVNwsl97tlh6u2B2qWF6tGR9s2Z9sGV+tmd+tGd/tWZ+uUJowkJpwkNpxkNqxUJqx0RsyUptwU1w wU5zxlN2yVl8wFp9wlt+wWeBumeEv2iBuGmCumiBvmqBvGqDvV+AwV6Awl+B1F+D12CAwWGDw2KD w2CExGWFw2WFxGWFxWWHxWaGxGeHxGeHxmKGymeGzGeJxWeIxmSIy2eKzGiFwmiGy2iIxWmIx2iK yW+JymyMyGyMyW2MyG2NyG2NyW2Oy2aH02SI3GmI0GqJ0GqK1GuL2GyO3W+Qz3GKx3CN0HGSzHuX y3iVznGR0HOT0HKQ1XqZ0H6b0X+d0n6d1H+c34KbyoWczImdy4idz4qdzY2iz4Kg1oqj0oug1I2k 1I2m1Y+n1o+p1pCo34mj4ZCp5JCr6Jmz4pqy4Z204Z624qW53qm936q/3qW87KW87aq/4ay+4b3I 4L/L5bzT/L3U/cPO5cPQ6czW6czW7M3Y7NDa7dPc79bg8Nnh8t7l8uLm8+fr9ebr9ufr9+js9uvu 9/Ly8vX3+/f4+/f5/Pj6/P///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/AMsJLAdOGTJiwxIqVEgs2TFwA8stc2YLVaqLGEU5apTI1TNjEYWx0lSqpMlJq6JZy9ZqVbCI vBhZypQJ06VKjE5F3BVIV8RcgCIdOoRokSQ41wSOq2bKz62IsQQZOjTIECE5Ur4J/LNjTyFYEb0M SGKli544xaaRE0gNGxcBWiKGMZBAAQIJAZhFFPiFAJiIYw5s6OABBIRazcQJhCZtSwExEclE4BDi xIsYFQBoE0hiAQYLZSLWmfDBhAwbOXgw2CbwyggXGuZEtEOhhIwaPJoMacBNYJYVM0TciYgnA4sb QphAmeLAm8A2PXCkoBMxzwUaOpxEOZPmQTeBbnwsQ0HxKOKoKiqUPDGDZg2RcALfBPmBhVJEWr+o tABi5AiSIq/40osaMLABzCwRgSMLKZAo0sknoITCSR98bOKJKriAExAAOwAAAAA= --00000000000017750e0577dee279 Content-Disposition: inline; filename="image005.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff853ad05> R0lGODlhFgARAPcAAAA7fQBLhwBMiABOiQBPighUjAhWjwtWjQtWjgxWjgxXjg1YjwtYkAxYkQxZ kQ1ZkQ9ZkBBbkhRakBZekxdekhhflBhglBlglBpilxxnmBloox1spx16qR97qiFuqiJwqiJwqyVx qSVxqiVzrCZ/rCpxoih/qyV4tCp5tip7ti5/tCh8uCeArSuBriyCri6Dry6AtDWAqjGAtzCCtzKD tzCFsDKGsTaDtzSHsTeIsjeJsziDuDmKsjuLtDqMszqMtD6MtT6OtD6PtkCOtkKPtUWJvEaKvUSS t0SUu0aUuVKHrlaIr1WJsFeKsVmLslqLs1uNtF6PtVeXvGCQtmqbvW+avHKdvXOdvnSdvnaev0aQ ykuSx0iSy02TymOfwGWfwGqlxW6ryXigwHmgwHmhwHujwXujwnukw3yjwXmoxnqpxXuvy36yzYam vomnvoGnxYKnxYWqx4msyI6wyo6xypOuwZK0zJiww5m40JjC17DP37PR4bzX5MTb6MXb6Mjd6Mzg 6tXm7/P4+fz8/f/+/v/+/////v///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAFgARAAAI/wAPCRTY houRIggTKixiRIubgQK7qPHypaLFi1+8pNkC8dCNHzo6cLDRo6RJkz52dFQRBIhAMDmGyJwpk4iM jjB4rBHY5wVNmkdodJyRhEUePTVwuHDRwwWJFkKQxBjRUUMGKXz2sAnzB5AJP4IClUggwUPHDQeW CMRDpaPAARM+nF3AROCcJwOvGBI4RYFciBvoCqQDReAZAGIEminwd2DguocIC3wTAItAMoznQpZ8 CE6ALJczA17QRKCdKALjBBgjEI1oxxCUHBokx8khQmUIVDlUyAqCxgI3XIggQICBB8UZYHBQvIEF EB1PUKhAvbr16hRWdKyDQkSI7+DDhwUQkeJOQAA7AAAAAA== --00000000000017750e0577dee279 Content-Disposition: inline; filename="image006.gif" Content-Transfer-Encoding: base64 Content-ID: <1665deacbff9352516> R0lGODlhFQARAIcAAACv8AGv8ASw8AWw8Aax8Aix8Amx8Amy8Aqy8Auy8A+z8BC08BG08Ra28Re2 8Ru38R248R648SG58SO68iW68ie78iq88iq88yy98i2+8y698jC+8jO/8jS/8zfA8zTA9DbB9DfB 9DvB8znB9DzC8z7C80LD80LE9EPF9UTE9EXE9EbF9EbG9UrG9ErG9UrH9UvG9EzG9FDI9FLI9FPI 9FPJ9FPK9lfK9VfM9lrL9VvN913M9V3O91/N9V/O92HN9WPO9WPO9mPP92XO9WjP9mPQ+GjQ9mnQ 9mrQ9mvQ9m/R9mjR+GrS+G3T+G7S+HDS9nLS9nPS9nPT9nbU9nbU93HU+XjV93nU93vV93zW933W 93/W93nX+YDX94HX94LX94LY94PY94TY94XY94bY94bZ94fZ94TZ+IXZ+IjZ94na+Ina+Yva+Izb +I7b+I3c+I7c+Y/c+JDc+JHc+JPc+JTd+JXd+Jnf+Zrf+Jrf+Zvf+Jvf+Zvg+Zzg+aDh+aPi+aXi +aXj+afj+ajj+ark+qzl+q/l+r/r+9Lx/NPx/NTx/Nz0/N30/d70/eP2/ef3/e35/e75/vD6/vP7 /vj8/vr9/vv9/v3+/v7+/v7+/////wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAP8ALAAAAAAVABEA AAj/ADUJFFjpDpIZP8aw+WIGEKSBEAkqiUKGjpgnRHbUULEBy6SIAu9E0aNnjpgpRHLEKIEBAgdH IJOQweOmyxE2gwrVkeEAQQALHyHSiCMnzJNGmi5R0oSpD4EBAqBE7PGFjZZBmhDB6JDjoYgJFAw8 HAiGitVDmg61aJHiRpYSKmAw+AOxTZY5afJk0vTIUBYPEhwsOBBACsQyXvbYCdOF0UBJVwIAmAwE IhsvW0wgmFzhRp6lQyYDMDwwkIPJK+40ED1HkyDRRCBCMjBZjaZEHgpoUKSJjegHEaUkWBABLcRF FRYsULAg4iQSF0B8CHKHkB8rI0Joz3ACpCMXLGzwKRhPfrwOFHZAapqE5kURJvCXVOHSxIcRS+oF RhoEZ82bM0Lg4AQf+AUEADsAAAAA --00000000000017750e0577dee279 Content-Disposition: inline; filename="image005.gif" Content-Transfer-Encoding: base64 Content-ID: <> R0lGODlhFgARAPcAAAA7fQBLhwBMiABOiQBPighUjAhWjwtWjQtWjgxWjgxXjg1YjwtYkAxYkQxZ kQ1ZkQ9ZkBBbkhRakBZekxdekhhflBhglBlglBpilxxnmBloox1spx16qR97qiFuqiJwqiJwqyVx qSVxqiVzrCZ/rCpxoih/qyV4tCp5tip7ti5/tCh8uCeArSuBriyCri6Dry6AtDWAqjGAtzCCtzKD tzCFsDKGsTaDtzSHsTeIsjeJsziDuDmKsjuLtDqMszqMtD6MtT6OtD6PtkCOtkKPtUWJvEaKvUSS t0SUu0aUuVKHrlaIr1WJsFeKsVmLslqLs1uNtF6PtVeXvGCQtmqbvW+avHKdvXOdvnSdvnaev0aQ ykuSx0iSy02TymOfwGWfwGqlxW6ryXigwHmgwHmhwHujwXujwnukw3yjwXmoxnqpxXuvy36yzYam vomnvoGnxYKnxYWqx4msyI6wyo6xypOuwZK0zJiww5m40JjC17DP37PR4bzX5MTb6MXb6Mjd6Mzg 6tXm7/P4+fz8/f/+/v/+/////v///wAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAFgARAAAI/wAPCRTY houRIggTKixiRIubgQK7qPHypaLFi1+8pNkC8dCNHzo6cLDRo6RJkz52dFQRBIhAMDmGyJwpk4iM jjB4rBHY5wVNmkdodJyRhEUePTVwuHDRwwWJFkKQxBjRUUMGKXz2sAnzB5AJP4IClUggwUPHDQeW CMRDpaPAARM+nF3AROCcJwOvGBI4RYFciBvoCqQDReAZAGIEminwd2DguocIC3wTAItAMoznQpZ8 CE6ALJczA17QRKCdKALjBBgjEI1oxxCUHBokx8khQmUIVDlUyAqCxgI3XIggQICBB8UZYHBQvIEF EB1PUKhAvbr16hRWdKyDQkSI7+DDhwUQkeJOQAA7AAAAAA== --00000000000017750e0577dee279-- --===============3282779162329227793== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============3282779162329227793==-- From mgs-bounces@autox.team.net Wed Oct 10 14:10:56 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id E42942587FBE for ; Wed, 10 Oct 2018 14:10:56 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from c.mail.sonic.net (c.mail.sonic.net [64.142.111.80]) by autox.team.net (Postfix) with ESMTP id 8FCAA2587F25 for ; Wed, 10 Oct 2018 13:55:15 -0600 (MDT) Received: from [192.168.5.71] (23-119-162-218.lightspeed.mtryca.sbcglobal.net [23.119.162.218]) (authenticated bits=0) by c.mail.sonic.net (8.15.1/8.15.1) with ESMTPSA id w9AJt7Od013243 (version=TLSv1.2 cipher=DHE-RSA-AES128-SHA bits=128 verify=NOT) for ; Wed, 10 Oct 2018 12:55:08 -0700 References: <3d59c0ca-dcca-4163-9b5a-2c15d6158942@red4est.com> To: mglist Date: Wed, 10 Oct 2018 12:55:07 -0700 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.11; rv:52.0) Gecko/20100101 PostboxApp/6.1.4 Content-Language: en-US Subject: [Mgs] Fwd: Re: Fw: Hot B motor From: Larry Colen via Mgs Content-Transfer-Encoding: base64 Errors-To: mgs-bounces@autox.team.net CgpSaWNrIFN0YXJrd2VhdGhlciB2aWEgTWdzIHdyb3RlIG9uIDEwLzkvMTggNDoyMCBQTToKPiBN eSBhcG9sb2dpZXMgdG8gSGFwLCBQZXRlciBhbmQgRGF2ZToKPiAKPiBJIHRob3VnaHQgdGhpcyBx dWVzdGlvbiBjYW1lIGZyb20gbXkgbG9jYWwgTUcgY2FyIGNsdWIgbWVzc2FnZSBib2FyZCBzbyAK PiBJIHByb3ZpZGVkIGEgbG9jYWwgc29sdXRpb24uCgpJIHJlY29nbml6ZSBhbGwgb2YgdGhvc2Ug c291cmNlcywgcHJvYmFibHkgZnJvbSByZWZlcmVuY2VzIG9uIHRoaXMgbGlzdC4gCkkgdGhpbmsg SSBldmVuIGJvdWdodCBzb21lIHRyYWN0aW9uIGJhcnMgZnJvbSBGYWJ0ZWsgd2hlbiB0aGV5IHdl cmUgb3V0IAphdCBMYWd1bmEgU2VjYSBtYW55IHllYXJzIGFnby4KCgpUaGVyZSBpcyBhbHNvCmh0 dHA6Ly93d3cucHJhdGhlcnJhY2luZy5jb20vCgoKPiAKPiBUbyBuYW1lIGEgZmV3Ogo+IAo+IEhh cCBXYWxkcm9wCj4gCj4gaHR0cDovL3d3dy5hY21lc3BlZWRzaG9wLmNvbS8KPiAKPiAKPiAKPiBQ ZXRlciBCdXJnZXNzCj4gCj4gaHR0cDovL3d3dy5tZy1jYXJzLm9yZy51ay9wZXRlcmJ1cmdlc3Mv aW5kZXhzdGFydC5odG1sCj4gCj4gRGF2ZSBIZWFkbGV5Cj4gCj4gaHR0cDovL3d3dy5mYXN0LW1n LmNvbS8KCgotLSAKTGFycnkgQ29sZW7CoMKgwqDCoMKgwqDCoCDCoMKgIExSQ0ByZWQ0ZXN0LmNv bcKgwqDCoMKgwqDCoMKgwqDCoCBodHRwOi8vcmVkNGVzdC5jb20vbHJjCmh0dHBzOi8vd3d3LmZs aWNrci5jb20vcGhvdG9zL2VsbGFyc2VlL2NvbGxlY3Rpb25zLzcyMTU3NjEyODI0NzMyNDc3LwoK Ci0tIApMYXJyeSBDb2xlbsKgwqDCoMKgwqDCoMKgIMKgwqAgTFJDQHJlZDRlc3QuY29twqDCoMKg wqDCoMKgwqDCoMKgIGh0dHA6Ly9yZWQ0ZXN0LmNvbS9scmMKaHR0cHM6Ly93d3cuZmxpY2tyLmNv bS9waG90b3MvZWxsYXJzZWUvY29sbGVjdGlvbnMvNzIxNTc2MTI4MjQ3MzI0NzcvCl9fX19fX19f X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fCgpNZ3NAYXV0b3gudGVhbS5u ZXQKRG9uYXRlOiBodHRwOi8vd3d3LnRlYW0ubmV0L2RvbmF0ZS5odG1sClN1Z2dlc3RlZCBhbm51 YWwgZG9uYXRpb24gICQxMi43NQoKQXJjaGl2ZTogaHR0cDovL3d3dy50ZWFtLm5ldC9waXBlcm1h aWwvbWdzCgpVbnN1YnNjcmliZTogaHR0cDovL2F1dG94LnRlYW0ubmV0L21haWxtYW4vb3B0aW9u cy9tZ3MvbWhhcmNAYXV0b3gudGVhbS5uZXQK From mgs-bounces@autox.team.net Thu Oct 11 13:43:55 2018 Return-Path: Delivered-To: mharc@autox.team.net Received: from autox.team.net (localhost [127.0.0.1]) by autox.team.net (Postfix) with ESMTP id C45CF258843B for ; Thu, 11 Oct 2018 13:43:55 -0600 (MDT) Delivered-To: mgs@autox.team.net Received: from smtp.southslope.net (smtp.southslope.net [216.51.139.10]) by autox.team.net (Postfix) with ESMTP id 74C04258835F for ; Thu, 11 Oct 2018 12:57:44 -0600 (MDT) Received: from rileyPC (151.78.126.208.dyn.southslope.net [208.126.78.151]) (Authenticated sender: riverside@southslope.net) by smtp.southslope.net (Postfix) with ESMTPA id 3EBED41A93 for ; Thu, 11 Oct 2018 13:57:43 -0500 (CDT) To: Date: Thu, 11 Oct 2018 13:57:39 -0500 Importance: Normal Subject: [Mgs] XPAG Con Rods From: Ron Sanborn via Mgs Errors-To: mgs-bounces@autox.team.net This is a multi-part message in MIME format. --===============8950584957196272936== boundary="----=_NextPart_000_0011_01D4616A.5F4BD560" This is a multi-part message in MIME format. ------=_NextPart_000_0011_01D4616A.5F4BD560 charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I would like to buy a pair of used XPAG connecting rods. Anybody have some gathering dust that=20 you would be willing to turn into cash?? art de armond ------=_NextPart_000_0011_01D4616A.5F4BD560 charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I would like to buy a pair of used XPAG connecting
rods.    Anybody have some gathering dust that =
you would be willing to turn into cash??
 
art de armond
------=_NextPart_000_0011_01D4616A.5F4BD560-- --===============8950584957196272936== Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/pipermail/mgs Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net --===============8950584957196272936==--