From joealexandervintage at gmail.com Thu Mar 2 13:12:26 2017 From: joealexandervintage at gmail.com (Joe Alexander) Date: Thu, 2 Mar 2017 14:12:26 -0600 Subject: [Fot] FOT News. KCup 2017 & 2018 and British Sports Car Hall of Fame FOT: Last month, Kas, Peg, and I sat down and discussed future Kastner Cups. Brilliant planning and executing is going on with Brian Garcia and Jason Ostrowski for Blackhawk Farms, so there wasn't much to discuss for the 2017 Kastner Cup. We did spend some time discussing trophies and awards. Peggy Kastner is, once again, sponsoring marque and special awards. KCup 2018: Exciting news for 2018. Time, Venue, and Chairperson will be announced at Kastner Cup 2018. We are looking at the continuation of the Kastner Cup on a year by year basis. Kas is pleased that we have a Chairperson in place that will sustain and perhaps elevate the prominence of The Kastner Cup Series. It's a tribute to Kas and Peg....and all us. BRITISH SPORTS CAR HALL OF FAME: The Class of 2017 has several prominent Triumph folks as Inductees. Kas Kastner, Bob Tullius, Mike Cook & Robert Johns are notable, with several others having past relationships with The Triumph Marque. The Class of 2018 nominees include no less than 10 FOT Members and perhaps there will be more. Nominations are Open. The present emphasis is being placed on LIVING nominees that are now actively promoting the BRITISH CAR HOBBY. (Nice to recognize people when they are still living) For further information on Inductees and more: Britisportscarhall.org Note: I am not sure any longer that my emails are posted to everyone on the list, so feel free to forward. Regards, Joe Alexander 645 1st Street Jesup, IA 50648 The-vintage-racer.com Gasketinnovations.com Cell: 319.464.4711 From jhd11 at hotmail.com Thu Mar 2 14:17:56 2017 From: jhd11 at hotmail.com (Joe Henry) Date: Thu, 2 Mar 2017 21:17:56 +0000 Subject: [Fot] FOT News. KCup 2017 & 2018 and British Sports Car Hall of Fame References: <7D076E8F-2705-4FCA-BD00-79D05293B14B@gmail.com> Joe, back to the East Coast? Joe Downer Charlotte, NC Sent from my iPhone > On Mar 2, 2017, at 3:12 PM, Joe Alexander via Fot wrote: > > FOT: > > Last month, Kas, Peg, and I sat down and discussed future Kastner Cups. > > Brilliant planning and executing is going on with Brian Garcia and Jason Ostrowski for Blackhawk Farms, so there wasn't much to discuss for the 2017 Kastner Cup. We did spend some time discussing trophies and awards. Peggy Kastner is, once again, sponsoring marque and special awards. > > KCup 2018: Exciting news for 2018. Time, Venue, and Chairperson will be announced at Kastner Cup 2018. We are looking at the continuation of the Kastner Cup on a year by year basis. Kas is pleased that we have a Chairperson in place that will sustain and perhaps elevate the prominence of The Kastner Cup Series. It's a tribute to Kas and Peg....and all us. > > BRITISH SPORTS CAR HALL OF FAME: The Class of 2017 has several prominent Triumph folks as Inductees. Kas Kastner, Bob Tullius, Mike Cook & Robert Johns are notable, with several others having past relationships with The Triumph Marque. > > The Class of 2018 nominees include no less than 10 FOT Members and perhaps there will be more. Nominations are Open. The present emphasis is being placed on LIVING nominees that are now actively promoting the BRITISH CAR HOBBY. (Nice to recognize people when they are still living) > > For further information on Inductees and more: > > Britisportscarhall.org > > Note: I am not sure any longer that my emails are posted to everyone on the list, so feel free to forward. > > Regards, > > Joe Alexander > 645 1st Street > Jesup, IA 50648 > The-vintage-racer.com > Gasketinnovations.com > Cell: 319.464.4711 > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhd11 at hotmail.com > > From pvucinic at netspace.net.au Fri Mar 3 01:19:09 2017 From: pvucinic at netspace.net.au (Peter Vucinic) Date: Fri, 3 Mar 2017 19:19:09 +1100 Subject: [Fot] TR6 Oil Pump Issues Listers, Has anyone had problems with the replacement 'POWERTUNE' brand TR6 Oil Pumps. In particular the casting strength? I can't torque down the 3 bolts to the recommended lbs, as the alloy is so soft it simply deforms Many thanks "You can Make a Small Fortune From Motor Racing. As long as You Started With A Lage Fortune!" Kind Regards Peter Vucinic TR4 - TR7 V8 - Spitfire MkII _______________________________________________ http://www.fot-racing.com Archive: http://www.team.net/archive Forums: http://www.team.net/forums -------------- next part -------------- An HTML attachment was scrubbed... URL: From william.tobin31 at verizon.net Fri Mar 3 13:59:45 2017 From: william.tobin31 at verizon.net (Bill Tobin) Date: Fri, 03 Mar 2017 15:59:45 -0500 Subject: [Fot] TR6 Oil Pump Issues References: My experience with oil replacement pumps wasn't good. I bought one a few years ago and wasn't impressed with the quality. Also the oil pickup tube on the new one had different threads than the original. Just had a bad feeling about it. I prefer using an original pump if it's within spes and clearances. Maybe you can find a NOS punp somewhere. My 2 cent's worth. Cheers, Bill ----- Original Message ----- From: Peter Vucinic via Fot To: 'FOT' Sent: Friday, March 03, 2017 3:19 AM Subject: [Fot] TR6 Oil Pump Issues Listers, Has anyone had problems with the replacement 'POWERTUNE' brand TR6 Oil Pumps. In particular the casting strength? I can't torque down the 3 bolts to the recommended lbs, as the alloy is so soft it simply deforms Many thanks "You can Make a Small Fortune From Motor Racing. As long as You Started With A Lage Fortune!" Kind Regards Peter Vucinic TR4 - TR7 V8 - Spitfire MkII _______________________________________________ fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums ------------------------------------------------------------------------------ _______________________________________________ fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31 at verizon.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From gblake58tr3 at icloud.com Sat Mar 4 18:39:36 2017 From: gblake58tr3 at icloud.com (Greg Blake) Date: Sat, 04 Mar 2017 19:39:36 -0600 Subject: [Fot] CVAR MSRH GRP2 Feb2017 sat R1 First race in the 3 in about 9 months. Enjoy, I certainly did other than that really wide 914:-) Greg https://youtu.be/XgT8BibD0_E Sent from my iPhone From dforeman at fooddude.com Sun Mar 5 09:10:14 2017 From: dforeman at fooddude.com (DF) Date: Sun, 5 Mar 2017 10:10:14 -0600 (CST) Subject: [Fot] CVAR MSRH GRP2 Feb2017 sat R1 References: An HTML attachment was scrubbed... URL: From van.mulders.marcel at telenet.be Mon Mar 6 10:59:52 2017 From: van.mulders.marcel at telenet.be (Marcel Van Mulders) Date: Mon, 6 Mar 2017 18:59:52 +0100 Subject: [Fot] CVAR MSRH GRP2 Feb2017 sat R1 References: Congratulations Greg, you did it really good! Marcel Van Mulders -----Oorspronkelijk bericht----- Van: Fot [mailto:fot-bounces at autox.team.net] Namens Greg Blake via Fot Verzonden: zondag 5 maart 2017 02:40 Aan: Fot Onderwerp: [Fot] CVAR MSRH GRP2 Feb2017 sat R1 First race in the 3 in about 9 months. Enjoy, I certainly did other than that really wide 914:-) Greg https://youtu.be/XgT8BibD0_E Sent from my iPhone _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive http://autox.team.net/mailman/options/fot/van.mulders.marcel at telenet.be From cudapilot at comcast.net Mon Mar 6 22:00:02 2017 From: cudapilot at comcast.net (Brian Garcia) Date: Mon, 6 Mar 2017 23:00:02 -0600 (CST) Subject: [Fot] 2017 Kastner Cup - Registration Now Open! ? Amici- VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. - Be sure that you select the Kastner Cup from the list of options - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. Brian Garcia Friendly Ghost Racing 847-452-2246 cudapilot at comcast.net mailto:cudapilot at comcast.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at bradakis.com Tue Mar 7 00:09:14 2017 From: mark at bradakis.com (Mark J Bradakis) Date: Tue, 7 Mar 2017 00:09:14 -0700 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> Yikes. I better start planning. Fly in to some airport, rent a car and reserve a room at some hotel. That kind of stuff. Event will be here sooner than I think. mjb. From sjanzen at me.com Tue Mar 7 10:21:58 2017 From: sjanzen at me.com (Scott Janzen) Date: Tue, 7 Mar 2017 12:21:58 -0500 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> rooms at the Kastner Hampton Inn are all booked. On Mar 7, 2017, at 2:09 AM, Mark J Bradakis via Fot wrote: Yikes. I better start planning. Fly in to some airport, rent a car and reserve a room at some hotel. That kind of stuff. Event will be here sooner than I think. mjb. _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From ponobill at gmail.com Tue Mar 7 12:43:15 2017 From: ponobill at gmail.com (Bill Babcock) Date: Tue, 7 Mar 2017 11:43:15 -0800 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> Looks like any Devins, Ambros, TR250K and Peyote would be group 3. Is that correct? Bill > On Mar 6, 2017, at 9:00 PM, Brian Garcia via Fot wrote: > > ? > > Amici- > > > > VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: > > > > http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx > > > > Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: > > > > - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: > > > > Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ > Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ > > - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. > > > > - Be sure that you select the Kastner Cup from the list of options > > > > - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. > > > > Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. > > > > Brian Garcia > > Friendly Ghost Racing > > 847-452-2246 > > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cudapilot at comcast.net Tue Mar 7 12:49:46 2017 From: cudapilot at comcast.net (Brian Garcia) Date: Tue, 7 Mar 2017 13:49:46 -0600 (CST) Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> <4A975603-8078-46B8-A6F5-1AF326609F2F@ponostyle.com> Bill- Correct. We'll all end up in the same place but you are correct that Group 3 would be the proper placeholders for specials. Thanks! Brian > On March 7, 2017 at 1:43 PM Bill Babcock wrote: > > > Looks like any Devins, Ambros, TR250K and Peyote would be group 3. Is that correct? > > Bill > > > > > > > > > On Mar 6, 2017, at 9:00 PM, Brian Garcia via Fot wrote: > > > > > > ? > > > > Amici- > > > > > > VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: > > > > > > http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx > > > > > > Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: > > > > > > - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: > > > > > > Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ > > > > Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ > > > > > > - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. > > > > > > - Be sure that you select the Kastner Cup from the list of options > > > > > > - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. > > > > > > Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. > > > > > > Brian Garcia > > > > Friendly Ghost Racing > > > > 847-452-2246 > > > > cudapilot at comcast.net mailto:cudapilot at comcast.net > > > > > > > > > > > > _______________________________________________ > > fot at autox.team.net mailto:fot at autox.team.net > > > > http://www.fot-racing.com > > > > Donate: http://www.team.net/donate.html > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Tue Mar 7 13:24:14 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 7 Mar 2017 15:24:14 -0500 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! Mark... Economically Milwaukee's Mitchel International Airport is the most convenient. Chicago's O'Hare or Midway might be cheaper, BUT believe not having to deal with Chicago's mega-urban congestion is worth millions. Blackhawk Farms Raceway is about a convenient hour and a half's drive from the Milwaukee airport, all but the last couple miles via 'interstate' roads. Bill Dentinger -----Original Message----- From: Mark J Bradakis via Fot To: fot Sent: Tue, Mar 7, 2017 12:14 pm Subject: Re: [Fot] 2017 Kastner Cup - Registration Now Open! Yikes. I better start planning. Fly in to some airport, rent a car and reserve a room at some hotel. That kind of stuff. Event will be here sooner than I think. mjb. _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Tue Mar 7 13:32:37 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 7 Mar 2017 15:32:37 -0500 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! Right! I would not dilly dally around booking accommodations. While there are a considerable number of hotel options in the same area as the host hotel, that Father's Day weekend always provided a hotel room shortage for VSCDA's Blackhawk Vintage Classic. I forget what the conflict is, but I think it is either an annual dog or horse show in the area. There's also two or three hotels down in the South Beloit area. They are actually a bit closer to the track, but not as nice as the host hotel. The Best Western Legacy Inn & Suites is nice. A third option is Rockford, Illinois (twenty-five minutes +/- south). Select a hotel close to the I-90 exits. Bill Dentinger -----Original Message----- From: Scott Janzen via Fot To: Mark J Bradakis Cc: 'Friends of Triumph' Triumph Sent: Tue, Mar 7, 2017 12:15 pm Subject: Re: [Fot] 2017 Kastner Cup - Registration Now Open! rooms at the Kastner Hampton Inn are all booked. On Mar 7, 2017, at 2:09 AM, Mark J Bradakis via Fot wrote: Yikes. I better start planning. Fly in to some airport, rent a car and reserve a room at some hotel. That kind of stuff. Event will be here sooner than I think. mjb. _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From charly at mitchelplumbing.com Tue Mar 7 16:11:43 2017 From: charly at mitchelplumbing.com (Charly Mitchel) Date: Tue, 7 Mar 2017 15:11:43 -0800 Subject: [Fot] Sptfire for sale https://losangeles.craigslist.org/sfv/cto/5967322143.html Charly Mitchel TR6 #44 -------------- next part -------------- An HTML attachment was scrubbed... URL: From tony at tonydrews.com Tue Mar 7 16:33:46 2017 From: tony at tonydrews.com (Tony Drews) Date: Tue, 07 Mar 2017 17:33:46 -0600 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> <4A975603-8078-46B8-A6F5-1AF326609F2F@ponostyle.com> An HTML attachment was scrubbed... URL: From cudapilot at comcast.net Tue Mar 7 16:42:02 2017 From: cudapilot at comcast.net (Brian Garcia) Date: Tue, 7 Mar 2017 17:42:02 -0600 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <1752947830.179985.1488862802660@connect.xfinity.com> <4A975603-8078-46B8-A6F5-1AF326609F2F@ponostyle.com> <20170307233352.1CDF9123E98@relay.mailchannels.net> Possibly, but again in this case you just have to pick something to get through the registration process. We will all be running in our own group together so what you enter is somewhat irrelevant. Regards, Brian > On Mar 7, 2017, at 5:33 PM, Tony Drews wrote: > > NOT AN OFFICIAL RESPONSE... Group 3 is the "sports racers" group, and the Devin / Ambro / Peyote could fit in that group. However we've had them run in group 2 with the Triumphs they are based on too. Could be more fun that way if group 2 isn't oversubscribed (it's a very popular group). The 250K could go group 3 as a sports racer or more likely group 8 which would be production cars that match the powertrain / era (like for the Devin / Ambro / Peyote in group 2). > > I suspect VSCDA can be flexible in that regard. > > Normally TR-2/3/4 run in group 2 and TR-5/6 in group 8. I think the Spitfires normally end up here too. It's the 1963 - 1972 sporty cars class where Group 2 is the 1962 and before group. Bill and Bob's Thunderbolt ran in Group 2 rather than group 3, but could have done either. > > Regards, Tony > > At 01:43 PM 3/7/2017, Bill Babcock via Fot wrote: > >> Looks like any Devins, Ambros, TR250K and Peyote would be group 3. Is that correct? >> >> Bill >> >> >> >> >> >>> On Mar 6, 2017, at 9:00 PM, Brian Garcia via Fot wrote: >>> >>> ? >>> >>> Amici- >>> >>> >>> VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: >>> >>> >>> http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx >>> >>> >>> Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: >>> >>> >>> - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: >>> >>> >>> Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ >>> >>> Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ >>> >>> >>> - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. >>> >>> >>> - Be sure that you select the Kastner Cup from the list of options >>> >>> >>> - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. >>> >>> >>> Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. >>> >>> >>> Brian Garcia >>> >>> Friendly Ghost Racing >>> >>> 847-452-2246 >>> >>> cudapilot at comcast.net >>> >>> >>> >>> >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dlhogye at comcast.net Tue Mar 7 16:46:15 2017 From: dlhogye at comcast.net (davehogye) Date: Tue, 7 Mar 2017 23:46:15 +0000 (UTC) Subject: [Fot] KCup host hotel room booked today Hello Friends, I booked a room at the host hotel today for the KCup event weekend. I'm not sure any others are available. I booked a King bed with queen fold-out couch and they had to switch me to a double queen for Saturday night. So, some finagling was needed. $159 per night. If for some reason I don't make the trip, I'll pass the reservation on to the group. Cheers, Dave H. -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Tue Mar 7 17:23:51 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 7 Mar 2017 19:23:51 -0500 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! BrianBill... I am not sure what is happening with VSCDA car placement now, but our TR powered Tornado Thunder Bolt always ran 'with' Race Group 2, as did TR powered Ambros, Devins, the Peyote, etc. I do not remember VSCDA ever listing the Thunder Bolt as Group 3. Perhaps some of those cars were designated Group 3 race cars, but raced with Race Group 2. I know that there is currently a TR powered Kellison racing in VSCDA. Bill Dentinger -----Original Message----- From: Brian Garcia via Fot To: Bill Babcock Cc: fot Sent: Tue, Mar 7, 2017 3:20 pm Subject: Re: [Fot] 2017 Kastner Cup - Registration Now Open! Bill- Correct. We'll all end up in the same place but you are correct that Group 3 would be the proper placeholders for specials. Thanks! Brian On March 7, 2017 at 1:43 PM Bill Babcock wrote: Looks like any Devins, Ambros, TR250K and Peyote would be group 3. Is that correct? Bill On Mar 6, 2017, at 9:00 PM, Brian Garcia via Fot wrote: ? Amici- VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. - Be sure that you select the Kastner Cup from the list of options - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. Brian Garcia Friendly Ghost Racing 847-452-2246 cudapilot at comcast.net _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Tue Mar 7 17:50:42 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 7 Mar 2017 19:50:42 -0500 Subject: [Fot] 2017 Kastner Cup - Registration Now Open! References: <852574791.1010266.1488916186992@connect.xfinity.com> Brian/Bill Shame on me. I visited the VSCDA website and it all came back to me. VSCDA designates their Race Car Groups numerically, and it is pretty clear where most race cars fit (including the specials in Race Group 3). Then after they determine the entry for an event, the designate Race Groups using letters of the alphabet, and that is where 3D and 3X end up running with the cars from Race Car 8 Group in Race Group "C" or CHARLIE, and 3E, 3F, and 3G end up running with the cars from Race Car 2 Group in Race Group "E" or ECHO. The preliminary schedule for VSCDA's Gingerman Raceway event is now up on their website. Visit the website, pull down the Gingerman preliminary schedule and it is pretty clear. We'll see, but I will not be surprised if at the Blackhawk Vintage Classic event this year there will be a special Race Groups for TRIUMPHs, most likely called Race Group F or FOXTROT. Bill Dentinger -----Original Message----- From: Brian Garcia via Fot To: Bill Babcock Cc: fot Sent: Tue, Mar 7, 2017 3:20 pm Subject: Re: [Fot] 2017 Kastner Cup - Registration Now Open! Bill- Correct. We'll all end up in the same place but you are correct that Group 3 would be the proper placeholders for specials. Thanks! Brian On March 7, 2017 at 1:43 PM Bill Babcock wrote: Looks like any Devins, Ambros, TR250K and Peyote would be group 3. Is that correct? Bill On Mar 6, 2017, at 9:00 PM, Brian Garcia via Fot wrote: ? Amici- VSCDA has opened registration for the 2017 Blackhawk Classic. This is the host event for the 2017 Kastner Cup. The link for online registration is: http://www.cvent.com/events/vscda-blackhawk-vintage-classic-xxv/invitation-706dde3c6c304c0d9262e3e7bca7dd88.aspx Please register as soon as you are able - this will be a big help with planning. Here's a few notes regarding registration: - You will have to select a Group and Class during the process. All of our cars will either fall into Group 2 or Group 8. Either way, we'll all run together in an all Triumph group but you will need to make a selection. Information on the groups can be found here: Group 8: https://vscda.org/racing/groups/group-8-historic-production-gtu-through-1972-1275-cc-and-over-engines/ Group 2: https://vscda.org/racing/groups/group-2-vintage-production-based-sports-cars/ - The preliminary schedule has not been posted yet but in general there will Friday practice with an optional enduro at the end of the day, Saturday qualifying and then the Kastner Cup at the end of the day, and then additional opportunities for racing on Sunday. - Be sure that you select the Kastner Cup from the list of options - VSCDA will be providing me with contact information for all of the Kastner Cup competitors. I'll reach out with an email containing a few questions. Please take a few moments to answer these questions as the information will be used in a Kastner Cup program / spotters guide that will be available at the event. Thanks so much to everyone that is supporting the event. We can't wait to see you in June. Please let me know if you have any questions. Brian Garcia Friendly Ghost Racing 847-452-2246 cudapilot at comcast.net _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From enquiries at roadandtrack.net.au Wed Mar 8 04:13:59 2017 From: enquiries at roadandtrack.net.au (Enquiries Road & Track) Date: Wed, 8 Mar 2017 21:13:59 +1000 Subject: [Fot] anyone from chicago? after attending kastner trophy race meeting, we will be in chicago for 1 day (monday) before flying back to Australia. Can anyone suggest something interesting to do/see. will have rental car thanks Terry -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbarr at McCarty-Law.com Wed Mar 8 06:55:43 2017 From: sbarr at McCarty-Law.com (Barr, Scott) Date: Wed, 8 Mar 2017 13:55:43 +0000 Subject: [Fot] anyone from chicago? References: What do you like? Museums? Art? Tall buildings? Architecture? Shopping? Meat processing? All of that is available. You could watch ?Ferris Bueller?s Day Off? and recreate those activities. Sans killing the Ferrari. Scott (B.) From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Enquiries Road & Track via Fot Sent: Wednesday, March 08, 2017 5:14 AM To: fot at autox.team.net Subject: [Fot] anyone from chicago? after attending kastner trophy race meeting, we will be in chicago for 1 day (monday) before flying back to Australia. Can anyone suggest something interesting to do/see. will have rental car thanks Terry -------------- next part -------------- An HTML attachment was scrubbed... URL: From jason at multivintage.com Wed Mar 8 07:42:12 2017 From: jason at multivintage.com (Jason Ostrowski) Date: Wed, 8 Mar 2017 08:42:12 -0600 Subject: [Fot] anyone from chicago? References: Terry, I live very close to Chicago and have lived there my whole life. There are several wonderful museums (Science, Art, And Natural History to name a few), There's several miles of walking or biking paths along the lakefront that give a nice perspective of great city views and lakeside people watching. You could go to the top of the Sears Tower (Willis tower) for some breathtaking views of the entire city. Nice public parks too. Lots of great restaurants and shopping areas. Give me an idea of what sort of stuff you guys might be into and I will be happy to help you plan an agenda and an idea of what you could fit into any particular timeline. on any other day I would happy to take you on my own special world famous "bright and dark" side tour... But I already have plans... I will most likely be drinking Champagne all day ; out of my newly won and totally awesome Kastner Cup. Jason Ostrowski Friendly Ghost Racing 1969 Triumph GT6+ Racecars On Wed, Mar 8, 2017 at 5:13 AM, Enquiries Road & Track via Fot < fot at autox.team.net> wrote: > after attending kastner trophy race meeting, we will be in chicago for 1 > day (monday) before flying back to Australia. Can anyone suggest something > interesting to do/see. will have rental car > > thanks > Terry > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason@ > multivintage.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From trhouse at columbus.rr.com Wed Mar 8 08:27:05 2017 From: trhouse at columbus.rr.com (Tom Householder) Date: Wed, 8 Mar 2017 10:27:05 -0500 Subject: [Fot] anyone from chicago? References: <84F56CFCC31FAC48AE160008ADDECFA562D7F490@SVR-EXCH02.mccarty-law.com> Go to "Millers Pub" Next to the Palmer house downtown (at least it was the last time I was there) ..... Best Rueben sandwich in the world!!! On Mar 8, 2017, at 8:55 AM, Barr, Scott via Fot wrote: > What do you like? Museums? Art? Tall buildings? Architecture? > Shopping? Meat processing? All of that is available. > > > > You could watch ?Ferris Bueller?s Day Off? and recreate those > activities. Sans killing the Ferrari. > > > > Scott (B.) > > > > From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of > Enquiries Road & Track via Fot > Sent: Wednesday, March 08, 2017 5:14 AM > To: fot at autox.team.net > Subject: [Fot] anyone from chicago? > > > > after attending kastner trophy race meeting, we will be in chicago > for 1 day (monday) before flying back to Australia. Can anyone > suggest something interesting to do/see. will have rental car > > > > thanks > > Terry > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/ > trhouse at columbus.rr.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jason at multivintage.com Wed Mar 8 08:45:22 2017 From: jason at multivintage.com (Jason Ostrowski) Date: Wed, 8 Mar 2017 09:45:22 -0600 Subject: [Fot] Kastner Cup Run Group Detail Folks. If for some reason you missed the previous announcement... Here is an important reiteration: I understand that everyone wants to select their proper run group. However, In the end, it really Doesn't Matter what group you select For 2 reasons. Reason 1: ALL US TRIUMPH GUYS WILL HAVE OUR OWN RUN GROUP. In other words. ALL TRIUMPH POWERED CARS WILL BE GROUPED TOGETHER AND WILL RUN TOGETHER FOR THE PRACTICE, QUALIFYING And RACE SESSIONS. This is NOT limited to just the Kastner Cup. Reason 2: Brian and I will handle, all other classification details with VSCDA for any other aspect of the weekend's activities. For example even if you enter the additional enduro, In the end, Brian and I are going approve and discuss classification for you with the chairman and registrar for every possible session. Depending on how many entries we get, we may also Run with some different cars on Sunday. But In any case we are very involved in the planning concerning Race groups, schedule etc. and will handle all such classification. Brian has Done a masterful job negotiating with VSCDA for such an arrangement. As It was one of the main things that we wanted to have happen.(To have an ECLUSIVE TRIUMPH RUN GROUP) Just about everything is going well from a planning standpoint and we are in regular discussions with our sanctioning body on such matters. We are working very hard to make this the Best Kastner Cup Yet. We have some awesome things planned for a fun and exciting racing and social weekend. This is not our first rodeo in terms of organizing race weekends And I promise we have thought of everything. (and still have lots of it to do) Outside of the fact that you need to arrange your own accomodations And Outside of the fact that we will have OUR OWN run group; The key point I would like to drive home here, Our request to all of you is to simply Show up ready to race and party and leave the rest to Friendly Ghost Racing. You won't be disappointed. Jason Ostrowski Friendly Ghost Racing 1969 Triumph GT6+ racecars -------------- next part -------------- An HTML attachment was scrubbed... URL: From levilevi at comcast.net Wed Mar 8 09:47:12 2017 From: levilevi at comcast.net (Elwyn Rolofson) Date: Wed, 8 Mar 2017 09:47:12 -0700 Subject: [Fot] anyone from chicago? References: Billy Goat Tavern Sent from my Commodore 64 > On Mar 8, 2017, at 7:42 AM, Jason Ostrowski via Fot wrote: > > Terry, > I live very close to Chicago and have lived there my whole life. > There are several wonderful museums (Science, Art, And Natural History to name a few), > There's several miles of walking or biking paths along the lakefront that give a nice perspective of great city views and lakeside people watching. > You could go to the top of the Sears Tower (Willis tower) for some breathtaking views of the entire city. > Nice public parks too. > Lots of great restaurants and shopping areas. > Give me an idea of what sort of stuff you guys might be into and I will be happy to help you plan an agenda and an idea of what you could fit into any particular timeline. > on any other day I would happy to take you on my own special world famous "bright and dark" side tour... > But I already have plans... > I will most likely be drinking Champagne all day ; out of my newly won and totally awesome Kastner Cup. > Jason Ostrowski > Friendly Ghost Racing > 1969 Triumph GT6+ Racecars > > > >> On Wed, Mar 8, 2017 at 5:13 AM, Enquiries Road & Track via Fot wrote: >> after attending kastner trophy race meeting, we will be in chicago for 1 day (monday) before flying back to Australia. Can anyone suggest something interesting to do/see. will have rental car >> >> thanks >> Terry >> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason at multivintage.com >> >> >> > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/levilevi at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From fasttr4 at aol.com Wed Mar 8 15:16:16 2017 From: fasttr4 at aol.com (Bruce Lapierre) Date: Wed, 8 Mar 2017 17:16:16 -0500 Subject: [Fot] anyone from chicago? Seconded -----Original Message----- From: Tom Householder via Fot To: Barr, Scott Cc: Enquiries Road & Track ; triumph friends Sent: Wed, Mar 8, 2017 4:12 pm Subject: Re: [Fot] anyone from chicago? Go to "Millers Pub" Next to the Palmer house downtown (at least it was the last time I was there) ..... Best Rueben sandwich in the world!!! On Mar 8, 2017, at 8:55 AM, Barr, Scott via Fot wrote: What do you like? Museums? Art? Tall buildings? Architecture? Shopping? Meat processing? All of that is available. You could watch ?Ferris Bueller?s Day Off? and recreate those activities. Sans killing the Ferrari. Scott (B.) From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Enquiries Road & Track via Fot Sent: Wednesday, March 08, 2017 5:14 AM To: fot at autox.team.net Subject: [Fot] anyone from chicago? after attending kastner trophy race meeting, we will be in chicago for 1 day (monday) before flying back to Australia. Can anyone suggest something interesting to do/see. will have rental car thanks Terry _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From awashatko at wi.rr.com Thu Mar 9 12:09:55 2017 From: awashatko at wi.rr.com (Allen Washatko) Date: Thu, 9 Mar 2017 13:09:55 -0600 Subject: [Fot] Kastner Cup Run Group Detail References: Jason Really appreciate all that you are doing for us! Allen Sent from my iPhone > On Mar 8, 2017, at 9:45 AM, Jason Ostrowski via Fot wrote: > > Folks. > If for some reason you missed the previous announcement... > > Here is an important reiteration: > I understand that everyone wants to select their proper run group. > > However, In the end, it really Doesn't Matter what group you select > For 2 reasons. > > Reason 1: > ALL US TRIUMPH GUYS WILL HAVE OUR OWN RUN GROUP. > In other words. > ALL TRIUMPH POWERED CARS WILL BE GROUPED TOGETHER AND WILL RUN TOGETHER FOR THE PRACTICE, QUALIFYING And RACE SESSIONS. > This is NOT limited to just the Kastner Cup. > > Reason 2: > Brian and I will handle, all other classification details with VSCDA for any other aspect of the weekend's activities. For example even if you enter the additional enduro, In the end, Brian and I are going approve and discuss classification for you with the chairman and registrar for every possible session. Depending on how many entries we get, we may also Run with some different cars on Sunday. But In any case we are very involved in the planning concerning Race groups, schedule etc. and will handle all such classification. > > Brian has Done a masterful job negotiating with VSCDA for such an arrangement. > As It was one of the main things that we wanted to have happen.(To have an ECLUSIVE TRIUMPH RUN GROUP) > > Just about everything is going well from a planning standpoint and we are in regular discussions with our sanctioning body on such matters. > > We are working very hard to make this the Best Kastner Cup Yet. > We have some awesome things planned for a fun and exciting racing and social weekend. > This is not our first rodeo in terms of organizing race weekends > And I promise we have thought of everything. > (and still have lots of it to do) > > Outside of the fact that you need to arrange your own accomodations > And Outside of the fact that we will have OUR OWN run group; > The key point I would like to drive home here, > Our request to all of you is to simply Show up ready to race and party and leave the rest to Friendly Ghost Racing. > You won't be disappointed. > > Jason Ostrowski > Friendly Ghost Racing > 1969 Triumph GT6+ racecars > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko at wi.rr.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dmar823 at gmail.com Thu Mar 9 12:24:09 2017 From: dmar823 at gmail.com (Don Marshall) Date: Thu, 9 Mar 2017 14:24:09 -0500 Subject: [Fot] Nomination I'd like to nominate Bryan Brazelton for non-membership in our non-club. Bryan has just bought the former Jack Wheeler TR4A that I used to own and is going to be putting it back on the track pretty soon. May I have a second? Mark, Bryan's email is bbtr250 at gmail.com. Thanks, Don -------------- next part -------------- An HTML attachment was scrubbed... URL: From tedtsimx at bright.net Thu Mar 9 14:24:20 2017 From: tedtsimx at bright.net (Ted Schumacher) Date: Thu, 9 Mar 2017 16:24:20 -0500 Subject: [Fot] Chicago Brit car swap meet HI list. The Chicagoland MG swap meet is coming up, Sunday March 19. A really good event. Be there early because it starts to shut down around noon and a ghost town by 1 or so. A link to the site is below. If anyone needs us to bring parts (free shipping is good) please let me know as soon as you can and we will bring them along. Thanks for your time. Ted http://www.britishcarswap.info/ -- Ted Schumacher tedtsimx at bright.net http://www.tsimportedautomotive.com 108 S. Jefferson St. Pandora, Ohio, USA 45877 Fax: 419.384.3272 (24 Hrs.) Phone: 800.543.6648 (US & Canada) Tech/ Gen. Information/ Worldwide: 419.384.3022 From tr3a58 at verizon.net Thu Mar 9 15:27:08 2017 From: tr3a58 at verizon.net (Dean Tetterton) Date: Thu, 09 Mar 2017 17:27:08 -0500 Subject: [Fot] Nomination References: I will 2nd it. We need another TR4 for me to follow around the track. Dean Tetterton > On Mar 9, 2017, at 2:24 PM, Don Marshall via Fot wrote: > > I'd like to nominate Bryan Brazelton for non-membership in our non-club. Bryan has just bought the former Jack Wheeler TR4A that I used to own and is going to be putting it back on the track pretty soon. May I have a second? > > > Thanks, Don > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr3a58 at verizon.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From william.tobin31 at verizon.net Thu Mar 9 16:22:05 2017 From: william.tobin31 at verizon.net (Bill Tobin) Date: Thu, 09 Mar 2017 18:22:05 -0500 Subject: [Fot] Nomination References: Second! Welcome to the group. Bill ----- Original Message ----- From: Don Marshall via Fot To: Friends of Triumph Cc: Bryan Brazelton Sent: Thursday, March 09, 2017 2:24 PM Subject: [Fot] Nomination I'd like to nominate Bryan Brazelton for non-membership in our non-club. Bryan has just bought the former Jack Wheeler TR4A that I used to own and is going to be putting it back on the track pretty soon. May I have a second? Mark, Bryan's email is bbtr250 at gmail.com. Thanks, Don ------------------------------------------------------------------------------ _______________________________________________ fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31 at verizon.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From robertlangtr6 at yahoo.com Thu Mar 9 17:02:51 2017 From: robertlangtr6 at yahoo.com (Robert Lang) Date: Fri, 10 Mar 2017 00:02:51 +0000 (UTC) Subject: [Fot] Nomination References: SECOND On Thursday, March 9, 2017 4:39 PM, Don Marshall via Fot wrote: I'd like to nominate Bryan Brazelton for non-membership in our non-club.? Bryan has just bought the former Jack Wheeler TR4A that I used to own and is going to be putting it back on the track pretty soon.? May I have a second? Mark, Bryan's email is bbtr250 at gmail.com. ? Thanks, Don_______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From chasgee22 at gmail.com Thu Mar 9 17:50:09 2017 From: chasgee22 at gmail.com (chasgee22 at gmail.com) Date: Thu, 9 Mar 2017 16:50:09 -0800 Subject: [Fot] anyone from chicago? References: <84F56CFCC31FAC48AE160008ADDECFA562D7F490@SVR-EXCH02.mccarty-law.com> Don't forget the Wiener Circle! Chuck > On Mar 8, 2017, at 5:55 AM, Barr, Scott via Fot wrote: > > What do you like? Museums? Art? Tall buildings? Architecture? Shopping? Meat processing? All of that is available. > > You could watch ?Ferris Bueller?s Day Off? and recreate those activities. Sans killing the Ferrari. > > Scott (B.) > > From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Enquiries Road & Track via Fot > Sent: Wednesday, March 08, 2017 5:14 AM > To: fot at autox.team.net > Subject: [Fot] anyone from chicago? > > after attending kastner trophy race meeting, we will be in chicago for 1 day (monday) before flying back to Australia. Can anyone suggest something interesting to do/see. will have rental car > > thanks > Terry > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chasgee22 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From robertlangtr6 at yahoo.com Thu Mar 9 18:06:54 2017 From: robertlangtr6 at yahoo.com (Robert Lang) Date: Fri, 10 Mar 2017 01:06:54 +0000 (UTC) Subject: [Fot] K-Cup 2017 References: <1166445725.2611988.1489108014318.ref@mail.yahoo.com> Well... I guess I need to read the rules now. :-0 Oh - and get time off from work. Bob Lang -------------- next part -------------- An HTML attachment was scrubbed... URL: From mhaberthur at gmail.com Thu Mar 9 18:52:13 2017 From: mhaberthur at gmail.com (Michael Haberthur) Date: Thu, 9 Mar 2017 17:52:13 -0800 Subject: [Fot] Nomination References: <8B2F7A235F02467982BF6F9AB50DB488@hpd530> Ouch Dean!!! On Mar 9, 2017 5:10 PM, "Bill Tobin via Fot" wrote: > Second! Welcome to the group. > Bill > > ----- Original Message ----- > *From:* Don Marshall via Fot > *To:* Friends of Triumph > *Cc:* Bryan Brazelton > *Sent:* Thursday, March 09, 2017 2:24 PM > *Subject:* [Fot] Nomination > > I'd like to nominate Bryan Brazelton for non-membership in our non-club. > Bryan has just bought the former Jack Wheeler TR4A that I used to own and > is going to be putting it back on the track pretty soon. May I have a > second? > > Mark, Bryan's email is bbtr250 at gmail.com. > > Thanks, Don > > ------------------------------ > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/william.tobin31 at verizon.net > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/mhaberthur at gmail.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tom.lay at comcast.net Thu Mar 9 20:09:36 2017 From: tom.lay at comcast.net (Tom Lay) Date: Thu, 9 Mar 2017 21:09:36 -0600 Subject: [Fot] Nomination References: How about a non-second for a non-membership in a non-club ? > On Mar 9, 2017, at 1:24 PM, Don Marshall via Fot wrote: > > I'd like to nominate Bryan Brazelton for non-membership in our non-club. Bryan has just bought the former Jack Wheeler TR4A that I used to own and is going to be putting it back on the track pretty soon. May I have a second? > > Mark, Bryan's email is bbtr250 at gmail.com. > > Thanks, Don > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tom.lay at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Sat Mar 11 14:44:50 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Sat, 11 Mar 2017 16:44:50 -0500 Subject: [Fot] British Sports Car Hall of Fame Amici... Vintage Triumph Register President, Jack McGahey, has sent out an alert that numerous TRIUMPH folk are to be Charter Members of the British Sports Car Hall of Fame. These include Sir John Black, Mike Cook, Bob Johns, Kas Kastner, Bob Tullius, Graham Robson, Dick Langworth, and Giovanni Michelotti. This initial group of inductees will be joined by others including Sir Stirling Moss, and another personal favorite of mine, Peter Egan. Kudos to one and all. Bill Dentinger -------------- next part -------------- An HTML attachment was scrubbed... URL: From rkramer3 at austin.rr.com Tue Mar 14 05:48:50 2017 From: rkramer3 at austin.rr.com (Bob Kramer) Date: Tue, 14 Mar 2017 06:48:50 -0500 Subject: [Fot] S87492-0001 - 2014 Norma M20FC Race Car I get a daily email from a heavy equipment auction house specializing in salvage. Today's email included a 2014 Norma M20FC Race Car 2014 Norma M20FC Race Car Description 2014 Norma M20FC Race Car General . Production Year: 2014 . Manufacturer: Norma . Model: M20FC . VIN: 67388 . Performance Specifications: Honda 4 Cylinder Engine, Race Gas Condition This unit was damaged during transit on February 7, 2017 while in the transport trailer. The chassis is a race built carbon chassis. The chassis has hairline fractures and is not repairable for race purposes. Visually the chassis looks normal, but the hairline fractures will weaken the chassis substantially and make the race car unsafe for racing. The car can start and run but is not operable in its condition. There are no keys with this car as it has an electric ignition. Please refer to the attached photos and bid accordingly. Note: This unit is not a titled asset. The unit will be sold with a Salvage Bill of Sale only (title not applicable). This unit is to be considered for parts only. There will be no removal assistance available. This unit cannot self load. Buyer is responsible for all labor, equipment, logistics and associated fees to remove the unit. Location requires at least a 24-hour notice prior to removal Here is a link: https://goo.gl/QpXlvQ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 26887 bytes Desc: not available URL: From trmarty at hotmail.com Tue Mar 14 09:51:05 2017 From: trmarty at hotmail.com (marty) Date: Tue, 14 Mar 2017 15:51:05 +0000 Subject: [Fot] Sealing Block Wedges The new Payen gasket sets appear to come with neoprene pieces in place of the conventional wood wedges for use on the front sealing blocks, Spitfire and TR6 related. These neoprene pieces suck for lack of a better term. Years ago a local British shop commented that he didn't use the wood wedges, he used RTV in place of them. Has anybody here used RTV or "The Right Stuff" to fill in the voids in place of the wood wedges with success, or failure for that matter? Thanks, Marty -------------- next part -------------- An HTML attachment was scrubbed... URL: From sjanzen at me.com Tue Mar 14 11:20:32 2017 From: sjanzen at me.com (Scott Janzen) Date: Tue, 14 Mar 2017 13:20:32 -0400 Subject: [Fot] Sealing Block Wedges References: i?ve used the black neoprene with no issues - they did require some trimming. Lots of permatex ultrablack. On Mar 14, 2017, at 11:51 AM, marty via Fot wrote: The new Payen gasket sets appear to come with neoprene pieces in place of the conventional wood wedges for use on the front sealing blocks, Spitfire and TR6 related. These neoprene pieces suck for lack of a better term. Years ago a local British shop commented that he didn't use the wood wedges, he used RTV in place of them. Has anybody here used RTV or "The Right Stuff" to fill in the voids in place of the wood wedges with success, or failure for that matter? Thanks, Marty _______________________________________________ http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From awashatko at wi.rr.com Tue Mar 14 12:49:41 2017 From: awashatko at wi.rr.com (Allen Washatko) Date: Tue, 14 Mar 2017 13:49:41 -0500 Subject: [Fot] Sealing Block Wedges References: I continue to use the wood pieces with success. Hey... it's a British car. You need wood somewhere! Allen Sent from my iPhone > On Mar 14, 2017, at 12:20 PM, Scott Janzen via Fot wrote: > > i?ve used the black neoprene with no issues - they did require some trimming. Lots of permatex ultrablack. > > On Mar 14, 2017, at 11:51 AM, marty via Fot wrote: > > The new Payen gasket sets appear to come with neoprene pieces in place of the conventional wood wedges for use on the front sealing blocks, Spitfire and TR6 related. These neoprene pieces suck for lack of a better term. Years ago a local British shop commented that he didn't use the wood wedges, he used RTV in place of them. Has anybody here used RTV or "The Right Stuff" to fill in the voids in place of the wood wedges with success, or failure for that matter? > > Thanks, > Marty > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen at me.com > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko at wi.rr.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rocky at spitfire4.com Tue Mar 14 18:38:54 2017 From: rocky at spitfire4.com (Rocky Entriken) Date: Tue, 14 Mar 2017 19:38:54 -0500 Subject: [Fot] Sealing Block Wedges References: I was taught the RTV trick by an engine builder decades ago. Even later I found a front sealing block that didn?t even have the slot for the woody wedgies and was installed with a complete RTV seal. --Rocky Entriken PS, I have wood in my Spitfire, as a spacer inside the fiberglass hood roughly where the latches were on the metal one. From: Allen Washatko via Fot Sent: Tuesday, March 14, 2017 1:49 PM To: Scott Janzen ; FOT Subject: Re: [Fot] Sealing Block Wedges I continue to use the wood pieces with success. Hey... it's a British car. You need wood somewhere! Allen Sent from my iPhone On Mar 14, 2017, at 12:20 PM, Scott Janzen via Fot wrote: i?ve used the black neoprene with no issues - they did require some trimming. Lots of permatex ultrablack. On Mar 14, 2017, at 11:51 AM, marty via Fot wrote: The new Payen gasket sets appear to come with neoprene pieces in place of the conventional wood wedges for use on the front sealing blocks, Spitfire and TR6 related. These neoprene pieces suck for lack of a better term. Years ago a local British shop commented that he didn't use the wood wedges, he used RTV in place of them. Has anybody here used RTV or "The Right Stuff" to fill in the voids in place of the wood wedges with success, or failure for that matter? Thanks, Marty _______________________________________________ fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen at me.com _______________________________________________ fot at autox.team.net http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko at wi.rr.com -------------------------------------------------------------------------------- _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: wlEmoticon-winkingsmile[1].png Type: image/png Size: 1135 bytes Desc: not available URL: From walt at hot-tr6.com Thu Mar 16 13:59:57 2017 From: walt at hot-tr6.com (walt at hot-tr6.com) Date: Thu, 16 Mar 2017 13:59:57 -0600 Subject: [Fot] VR-1 On Sale To my fellow FOT racers. At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. I don't know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart. It might be worth your while to see if this pricing holds true where you live. Good Hunting, Walt Hollowell Albuquerque, New Mexico -------------- next part -------------- An HTML attachment was scrubbed... URL: From pethier7 at gmail.com Thu Mar 16 14:18:46 2017 From: pethier7 at gmail.com (Philip Ethier) Date: Thu, 16 Mar 2017 15:18:46 -0500 Subject: [Fot] S87492-0001 - 2014 Norma M20FC Race Car References: <001e01d29cb8$f5214700$df63d500$@rr.com> Sounds like a parts car. On Tue, Mar 14, 2017 at 6:48 AM, Bob Kramer via Fot wrote: > I get a daily email from a heavy equipment auction house specializing in > salvage. Today?s email included a 2014 Norma M20FC Race Car > > [image: 2014 Norma M20FC Race Car] > > *Description* > > 2014 Norma M20FC Race Car > > *General* > > > > ? Production Year: 2014 > > ? Manufacturer: Norma > > ? Model: M20FC > > ? VIN: 67388 > > ? Performance Specifications: Honda 4 Cylinder Engine, Race Gas > > > > *Condition* > > This unit was damaged during transit on February 7, 2017 while in the > transport trailer. The chassis is a race built carbon chassis. The chassis > has hairline fractures and is not repairable for race purposes. Visually > the chassis looks normal, but the hairline fractures will weaken the > chassis substantially and make the race car unsafe for racing. The car can > start and run but is not operable in its condition. There are no keys with > this car as it has an electric ignition. Please refer to the attached > photos and bid accordingly. > > *Note: This unit is not a titled asset. The unit will be sold with a > Salvage Bill of Sale only (title not applicable). This unit is to be > considered for parts only.* > > There will be no removal assistance available. This unit cannot self load. > Buyer is responsible for all labor, equipment, logistics and associated > fees to remove the unit. Location requires at least a 24-hour notice prior > to removal > > Here is a link: > > > > https://goo.gl/QpXlvQ > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/pethier at comcast.net > > > > -- Phil Ethier West Side Saint Paul Minnesota USA 1973 Triumph Stag LE22439UBW "uncle jack", Sapphire Blue 2004 Suburban 8.1, Sport Red, the only automatic of the bunch 2005 Lotus Elise, Bordeaux Red Pearl 2005 Subaru Legacy GT Limited, Regal Blue Pearl http://www.mnautox.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 26887 bytes Desc: not available URL: From triosan at gmail.com Thu Mar 16 15:06:07 2017 From: triosan at gmail.com (Chuck Arnold and/or Kathleen Kelley) Date: Thu, 16 Mar 2017 14:06:07 -0700 Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> Dropping. None available here last month. Others still have it. On Mar 16, 2017 1:23 PM, "Walt Hollowell via Fot" wrote: > To my fellow FOT racers. > > At my local AutoZone region in and around Albuquerque, New Mexico all > Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. > > I don?t know if a rebranding is going on or if AutoZone is going to drop > this product or whatever but as long as I can find quarts on the shelves at > my local stores it is $1 per quart. > > It might be worth your while to see if this pricing holds true where you > live. > > > > Good Hunting, > > > > > > Walt Hollowell > > Albuquerque, New Mexico > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/triosan at gmail.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From walt at hot-tr6.com Thu Mar 16 17:26:42 2017 From: walt at hot-tr6.com (walt at hot-tr6.com) Date: Thu, 16 Mar 2017 17:26:42 -0600 Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> <3DCF5756-A790-4746-820A-B24A05BB82F2@comcast.net> I went by a few stores in Albuquerque was able to grab 38 quarts. Ta Daa. Walt Hollowell From: Robert Dalziel [mailto:robertdalziel at comcast.net] Sent: Thursday, March 16, 2017 3:58 PM To: walt at hot-tr6.com Subject: Re: [Fot] VR-1 On Sale I'll check again but here in Michigan after that last price drop they said they were not going to stock it again. And left no space on the shelve . Get it if you can Awrabest. Scottie On Mar 16, 2017, at 3:59 PM, Walt Hollowell via Fot wrote: To my fellow FOT racers. At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. I don?t know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart. It might be worth your while to see if this pricing holds true where you live. Good Hunting, Walt Hollowell Albuquerque, New Mexico _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From bschirano at yahoo.com Thu Mar 16 19:35:22 2017 From: bschirano at yahoo.com (Brian Schirano) Date: Fri, 17 Mar 2017 01:35:22 +0000 (UTC) Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> I remember this same story last year, maybe an annual sale? But not available everywhere unfortunately, Can't find it locally again this year??26A GT6+, 28 TR6Brian Schirano 585-305-0349 Cell? BSchirano at yahoo.com From: Walt Hollowell via Fot To: fot at autox.team.net Sent: Thursday, March 16, 2017 3:59 PM Subject: [Fot] VR-1 On Sale To my fellow FOT racers.At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, ?is on sale for $1 per quart. I don?t know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart.It might be worth your while to see if this pricing holds true where you live. ?Good Hunting, ? ?Walt HollowellAlbuquerque, New Mexico _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From toodamnfunky at comcast.net Thu Mar 16 19:40:24 2017 From: toodamnfunky at comcast.net (Jim Gray) Date: Thu, 16 Mar 2017 19:40:24 -0600 Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> <3DCF5756-A790-4746-820A-B24A05BB82F2@comcast.net> <008701d29eac$c50f3f40$4f2dbdc0$@hot-tr6.com> I cleaned Aurora Colorado, 36 was Jim g Sent from my iPhone > On Mar 16, 2017, at 5:26 PM, Walt Hollowell via Fot wrote: > > I went by a few stores in Albuquerque was able to grab 38 quarts. Ta Daa. > Walt Hollowell > > From: Robert Dalziel [mailto:robertdalziel at comcast.net] > Sent: Thursday, March 16, 2017 3:58 PM > To: walt at hot-tr6.com > Subject: Re: [Fot] VR-1 On Sale > > I'll check again but here in Michigan after that last price drop they said they were not going to stock it again. And left no space on the shelve . Get it if you can > > Awrabest. Scottie > > On Mar 16, 2017, at 3:59 PM, Walt Hollowell via Fot wrote: > > To my fellow FOT racers. > At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. > I don?t know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart. > It might be worth your while to see if this pricing holds true where you live. > > Good Hunting, > > > Walt Hollowell > Albuquerque, New Mexico > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/robertdalziel at comcast.net > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/toodamnfunky at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jhassall at gmail.com Fri Mar 17 08:26:08 2017 From: jhassall at gmail.com (J.C. Hassall) Date: Fri, 17 Mar 2017 10:26:08 -0400 Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> <862367677.1914104.1489714522951@mail.yahoo.com> My store said that AZ will no longer carry it, although didn't know why. He remembered that i cleaned him out of 50w last DEC and said there had been no subsequent requests, so perhaps lack of demand killed it? jim Fat-thumbed from my iPhone7 > On Mar 16, 2017, at 9:35 PM, Brian Schirano via Fot wrote: > > I remember this same story last year, maybe an annual sale? But not available everywhere unfortunately, Can't find it locally again this year > > 26A GT6+, 28 TR6 > Brian Schirano > 585-305-0349 Cell > BSchirano at yahoo.com > > > From: Walt Hollowell via Fot > To: fot at autox.team.net > Sent: Thursday, March 16, 2017 3:59 PM > Subject: [Fot] VR-1 On Sale > > To my fellow FOT racers. > At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. > I don?t know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart. > It might be worth your while to see if this pricing holds true where you live. > > Good Hunting, > > > Walt Hollowell > Albuquerque, New Mexico > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bschirano at yahoo.com > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhassall at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From toodamnfunky at comcast.net Fri Mar 17 09:35:58 2017 From: toodamnfunky at comcast.net (toodamnfunky at comcast.net) Date: Fri, 17 Mar 2017 15:35:58 +0000 (UTC) Subject: [Fot] VR-1 On Sale References: <000301d29e8f$e33b9350$a9b2b9f0$@hot-tr6.com> <862367677.1914104.1489714522951@mail.yahoo.com> <801FD251-44C0-4DAA-A898-B2C53842DF62@gmail.com> I heard from the air-cooled guys California banned it a few years ago. No suprise, we will likely see internal combustion free zones soon enough. jg ----- Original Message ----- From: "J.C. Hassall via Fot" To: "Brian Schirano" Cc: "fot" Sent: Friday, March 17, 2017 8:26:08 AM Subject: Re: [Fot] VR-1 On Sale My store said that AZ will no longer carry it, although didn't know why. He remembered that i cleaned him out of 50w last DEC and said there had been no subsequent requests, so perhaps lack of demand killed it? jim Fat-thumbed from my iPhone7 On Mar 16, 2017, at 9:35 PM, Brian Schirano via Fot < fot at autox.team.net > wrote: I remember this same story last year, maybe an annual sale? But not available everywhere unfortunately, Can't find it locally again this year 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell BSchirano at yahoo.com From: Walt Hollowell via Fot < fot at autox.team.net > To: fot at autox.team.net Sent: Thursday, March 16, 2017 3:59 PM Subject: [Fot] VR-1 On Sale To my fellow FOT racers. At my local AutoZone region in and around Albuquerque, New Mexico all Valvoline VR-1 20W50, non-synthetic, is on sale for $1 per quart. I don?t know if a rebranding is going on or if AutoZone is going to drop this product or whatever but as long as I can find quarts on the shelves at my local stores it is $1 per quart. It might be worth your while to see if this pricing holds true where you live. Good Hunting, Walt Hollowell Albuquerque, New Mexico _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive
_______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive
_______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From cudapilot at comcast.net Fri Mar 17 12:08:44 2017 From: cudapilot at comcast.net (Brian Garcia) Date: Fri, 17 Mar 2017 13:08:44 -0500 (CDT) Subject: [Fot] 2017 Kastner Cup - Weekly Update References: <027c01d29e68$b74cb250$25e616f0$@vscda.org> Happy St. Patrick's Day, Amici- We are three months out from being on track for the 15th running of the Kastner Cup. Sounds like a lot when you say it out loud but we all know how quickly the time will go by. Registration has been open for a week or so now. VSCDA had a few hiccups early but has worked through them now. We have ten Triumphs confirmed so far. My list of racers that had said they were planning on running is much larger than that so I am very hopeful for an incredible turnout. Early registration helps all of us on this end with planning so please get yours in as early as you are able. The link for online registration is: http://www.cvent.com/events/2017-vscda-blackhawk-vintage-classic-xxv/event-summary-706dde3c6c304c0d9262e3e7bca7dd88.aspx Just so you know, after submitting your registration VSCDA does a manual confirmation of all information before you receive an email confirming that your registration has been processed. This can take several days so no need to worry if you don't see something right away. If you have any questions please let me know - I am regular contact with their event chair. As previously mentioned here I am working on a Kastner Cup program/spotter's guide that will have background, facility, and scheduling information specific to the Kastner Cup to make it easier for entrants and guests to know when Triumph-specific activities both on track and off will be taking place that weekend. As such, I would like a picture of each entrant's car. Between shots I have taken at past events and internet searches and will be able to come up with many but surely not all. If you haven't previously sent me a picture of your car please do so when you register. This will be used for the program as well as added to an album on the Kastner Cup 2017 Facebook page: https://www.facebook.com/2017-Kastner-Cup-412465015590721 Good news from VSCDA. Bob Woodman Tires has signed on to support the event at Blackhawk Farms! For those of us that attend this event yearly it is a blessing as it has been a number of years since there was an onsite tire vendor. The support for and excitement about a large Kastner Cup contingent was certainly part of the equation to making this happen. If you run Hoosiers or Toyos please consider buying your tires from Bob Woodman tires and have them delivered to the track. Supporting a sponsor in this way helps us all in the long run as it makes it more likely to get them to support other vintage race events. Links to their website and ordering pages can be found below. Thanks for all of your support! Friendly Ghost Racing Brian Garcia - cudapilot at Comcast.net mailto:cudapilot at Comcast.net 847-452-2246 Jason Ostrowski - Jason at multivintage.net mailto:Jason at multivintage.net 312-208-5227 > > > > [Bob Woodman Tires] > > > > [http://new.bobwoodmantires.com/wp-content/uploads/2012/09/hoosier.jpg]Order Form: http://www.bobwoodmantires.com/hoosier-order-page/ > > [http://www.bobwoodmantires.com/wp-content/uploads/2013/03/Yokohama-logo-e1433186942453.jpg]Order Form: http://www.bobwoodmantires.com/yokohama_order_page/ > > [http://new.bobwoodmantires.com/wp-content/uploads/2012/09/toyotires.jpg]Order Form: http://www.bobwoodmantires.com/toyo-order-page/ > > > > > > > > Not sure what you need to purchase? Call Bob Woodman at (843) 524-8473 > > > > Here is the link to Bob Woodman Tires Website. http://www.bobwoodmantires.com/ > > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 959 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 4675 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image004.jpg Type: image/jpeg Size: 7265 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image005.jpg Type: image/jpeg Size: 4144 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image006.jpg Type: image/jpeg Size: 3580 bytes Desc: not available URL: From starr001 at umn.edu Fri Mar 17 13:31:48 2017 From: starr001 at umn.edu (starr001 University of Minnesota) Date: Fri, 17 Mar 2017 14:31:48 -0500 Subject: [Fot] Morgan Vintage Racer on BAT Hello fellow TR3/4 vintage racers. My race ready Morgan +4 is still looking for its third owner. Today it was listed on BAT (bringatrailer) with a detailed description including links to videos from ELVF 2015 and 2012, to a website for the car, and to a Classic Motorsports article about the car. Take a look. Patrick Starr -------------- next part -------------- An HTML attachment was scrubbed... URL: From tony at tonydrews.com Sat Mar 18 10:17:53 2017 From: tony at tonydrews.com (Tony Drews) Date: Sat, 18 Mar 2017 11:17:53 -0500 Subject: [Fot] Morgan Vintage Racer on BAT mail.com> References: Here's the link: http://bringatrailer.com/listing/1958-morgan-plus-4-roadster/ Fast car, well built. Kicked my ass. Cheers, Tony At 02:31 PM 3/17/2017, starr001 University of Minnesota via Fot wrote: >Hello fellow TR3/4 vintage racers. My race ready >Morgan +4 is still looking for its third owner.? > >Today it was listed on BAT (bringatrailer) with >a detailed description including links to ? >videos from ELVF 2015 and 2012, to a website for >the car, and to a Classic Motorsports article about the car. Take a look. > >Patrick Starr >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: >http://autox.team.net/mailman/options/fot/tony at tonydrews.com From tony at tonydrews.com Sat Mar 18 18:48:40 2017 From: tony at tonydrews.com (Tony Drews) Date: Sat, 18 Mar 2017 19:48:40 -0500 Subject: [Fot] Midwest contingent May race? I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? Thanks, Tony Drews vroom, vroom From jhasty at mhc-law.com Sun Mar 19 08:48:12 2017 From: jhasty at mhc-law.com (John Hasty) Date: Sun, 19 Mar 2017 14:48:12 +0000 Subject: [Fot] Midwest contingent May race? References: <20170319004836.5958E360CF6@relay.mailchannels.net> VRG Summit Point in May for us Sent from my iPhone > On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: > > I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? > > Thanks, Tony Drews > > vroom, vroom > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com > > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. From paulricco at att.net Sun Mar 19 13:27:45 2017 From: paulricco at att.net (Paul Ricco) Date: Sun, 19 Mar 2017 14:27:45 -0500 Subject: [Fot] Midwest contingent May race? References: <20170319004836.5958E360CF6@relay.mailchannels.net> Tony, We used to really enjoy the Spring race at Road America and we are really trying to have a good relationship with SVRA. Although the registerers and admin staff at SVRA have been TERRIFIC to deal with, some other areas of the staff have been far less than satisfactory. Tony is alway nice to us when we see him. However, we have gotten the royal run around in another area by SVRA. I am not a happy member at this time. We renewed are SVRA membership for 1 more year and we are going to give SVRA RA event another run this year. If we do not have a great experience (weather excluded, because they do not control that), we will done with SVRA and the Spring event at RA until another organization starts running the event. Paul > On Mar 19, 2017, at 9:48 AM, John Hasty via Fot wrote: > > VRG Summit Point in May for us > > Sent from my iPhone > >> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: >> >> I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? >> >> Thanks, Tony Drews >> >> vroom, vroom >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >> >> > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net > > From grandwazoo at earthlink.net Sun Mar 19 18:53:20 2017 From: grandwazoo at earthlink.net (Mike Jackson) Date: Sun, 19 Mar 2017 20:53:20 -0400 (GMT-04:00) Subject: [Fot] Midwest contingent May race? Last year we went to mid Ohio for the first time in nearly a decade, SVRA had hired some local tech guys. Probably SCCA. They did not understand vintage cars and there did not seem to be any mgmt guidance. After nearly 30 min of arguing and further dismantling of my car to try and satisfy him, I was about ready to load up and leave. Seriously. Just before I did so, some one showed up, did not introduce himself but said I could go. I didn't bother to ask for anyone to sign my logbook, just took my sticker and went back to the good old Triumph tree in the grass paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd of TRs that used to go. Mike Jackson -----Original Message----- >From: Paul Ricco via Fot >Sent: Mar 19, 2017 3:27 PM >To: John Hasty >Cc: "fot at autox.team.net" >Subject: Re: [Fot] Midwest contingent May race? > >Tony, > >We used to really enjoy the Spring race at Road America and we are really trying to have a good relationship with SVRA. Although the registerers and admin staff at SVRA have been TERRIFIC to deal with, some other areas of the staff have been far less than satisfactory. Tony is alway nice to us when we see him. However, we have gotten the royal run around in another area by SVRA. I am not a happy member at this time. We renewed are SVRA membership for 1 more year and we are going to give SVRA RA event another run this year. If we do not have a great experience (weather excluded, because they do not control that), we will done with SVRA and the Spring event at RA until another organization starts running the event. > >Paul > >> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot wrote: >> >> VRG Summit Point in May for us >> >> Sent from my iPhone >> >>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: >>> >>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? >>> >>> Thanks, Tony Drews >>> >>> vroom, vroom >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >>> >>> >> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >> >> > >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net > > From spitfire_racing at twcny.rr.com Mon Mar 20 04:48:51 2017 From: spitfire_racing at twcny.rr.com (Spitfire Racing) Date: Mon, 20 Mar 2017 06:48:51 -0400 Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> I feel the same way Mike. Those were great times due entirely to who we kept company with but there is no chance I'll ever attend another $VRA event. Even back then, they were more interested in the "big money" cars rather than the production sports car folks, yet I recall Triumphs filling the entire track for the parade laps. Mid-Ohio with their Nazi-like "security" and $VRA with its attentions to the moneyed few, seem to have shot themselves in the foot. Triumph guys have found other locations and groups more friendly to run with. Russ Moore -----Original Message----- From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Mike Jackson via Fot Sent: Sunday, March 19, 2017 8:53 PM To: Paul Ricco; John Hasty Cc: fot at autox.team.net Subject: Re: [Fot] Midwest contingent May race? Last year we went to mid Ohio for the first time in nearly a decade, SVRA had hired some local tech guys. Probably SCCA. They did not understand vintage cars and there did not seem to be any mgmt guidance. After nearly 30 min of arguing and further dismantling of my car to try and satisfy him, I was about ready to load up and leave. Seriously. Just before I did so, some one showed up, did not introduce himself but said I could go. I didn't bother to ask for anyone to sign my logbook, just took my sticker and went back to the good old Triumph tree in the grass paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd of TRs that used to go. Mike Jackson -----Original Message----- >From: Paul Ricco via Fot >Sent: Mar 19, 2017 3:27 PM >To: John Hasty >Cc: "fot at autox.team.net" >Subject: Re: [Fot] Midwest contingent May race? > >Tony, > >We used to really enjoy the Spring race at Road America and we are really trying to have a good relationship with SVRA. Although the registerers and admin staff at SVRA have been TERRIFIC to deal with, some other areas of the staff have been far less than satisfactory. Tony is alway nice to us when we see him. However, we have gotten the royal run around in another area by SVRA. I am not a happy member at this time. We renewed are SVRA membership for 1 more year and we are going to give SVRA RA event another run this year. If we do not have a great experience (weather excluded, because they do not control that), we will done with SVRA and the Spring event at RA until another organization starts running the event. > >Paul > >> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot wrote: >> >> VRG Summit Point in May for us >> >> Sent from my iPhone >> >>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: >>> >>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? >>> >>> Thanks, Tony Drews >>> >>> vroom, vroom >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >>> >>> >> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >> >> > >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net > > _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive http://autox.team.net/mailman/options/fot/spitfire_racing at twcny.rr.com From jeffsnook01 at gmail.com Mon Mar 20 07:33:00 2017 From: jeffsnook01 at gmail.com (Jeff Snook) Date: Mon, 20 Mar 2017 09:33:00 -0400 Subject: [Fot] May Racing References: Tony, I?m in the same quandary, RA or Summit Point. RA is a little closer for me to haul to, but not by much. Based on what you said about the May RA weather ( I remember unloading many years ago for this event and there was snow on the ground!) I think the weather at Summit will be better. Plus we?ll see our East Coast FOT buddies at Summit! OK, I?ve made up my mind. Vroom, vroom, Jeff Snook http://www.snooksdreamcars.com 419-344-0319 -------------- next part -------------- An HTML attachment was scrubbed... URL: From ponobill at gmail.com Mon Mar 20 14:32:24 2017 From: ponobill at gmail.com (Bill Babcock) Date: Mon, 20 Mar 2017 13:32:24 -0700 Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> Oh great, you?ve furthered my aversion to Mid Ohio. I had one of the standard fascist security schmuck experiences years ago, went and talked to management who offered to have me arrested. Wasn?t interested in returning. Heard everything was better. I think there are are plenty of other tracks and other events. I know this was probably more of an SVRA issue than a Mid Ohio issue, but still... Besides, if I went there and everything wasn?t peachy I?d hate myself . Bill > On Mar 19, 2017, at 5:53 PM, Mike Jackson via Fot wrote: > > Last year we went to mid Ohio for the first time in nearly a decade, SVRA had hired some local tech guys. Probably SCCA. They did not understand vintage cars and there did not seem to be any mgmt guidance. After nearly 30 min of arguing and further dismantling of my car to try and satisfy him, I was about ready to load up and leave. Seriously. Just before I did so, some one showed up, did not introduce himself but said I could go. I didn't bother to ask for anyone to sign my logbook, just took my sticker and went back to the good old Triumph tree in the grass paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd of TRs that used to go. > > Mike Jackson > > -----Original Message----- >> From: Paul Ricco via Fot >> Sent: Mar 19, 2017 3:27 PM >> To: John Hasty >> Cc: "fot at autox.team.net" >> Subject: Re: [Fot] Midwest contingent May race? >> >> Tony, >> >> We used to really enjoy the Spring race at Road America and we are really trying to have a good relationship with SVRA. Although the registerers and admin staff at SVRA have been TERRIFIC to deal with, some other areas of the staff have been far less than satisfactory. Tony is alway nice to us when we see him. However, we have gotten the royal run around in another area by SVRA. I am not a happy member at this time. We renewed are SVRA membership for 1 more year and we are going to give SVRA RA event another run this year. If we do not have a great experience (weather excluded, because they do not control that), we will done with SVRA and the Spring event at RA until another organization starts running the event. >> >> Paul >> >>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot wrote: >>> >>> VRG Summit Point in May for us >>> >>> Sent from my iPhone >>> >>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: >>>> >>>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? >>>> >>>> Thanks, Tony Drews >>>> >>>> vroom, vroom >>>> >>>> _______________________________________________ >>>> fot at autox.team.net >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >>>> >>>> >>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>> >>> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net >> >> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > From jason at multivintage.com Mon Mar 20 17:35:58 2017 From: jason at multivintage.com (Jason Ostrowski) Date: Mon, 20 Mar 2017 18:35:58 -0500 Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> <5DDA8065-B8B8-4D1F-BE00-9570F53F6BCF@ponostyle.com> On the positive side... When it comes to Blackhawk Farms, It is the exact opposite. We have had some truly epic parties there over the years. Things have happened there that people should have been arrested for. Yet, What happens at Blackhawk Stays At Blackhawk. No one from the track ever plays cop. Another reason to attend the Kastner Cup this year. Spoiler alert.... Brian and I are Actually building a full scale tavern style bar For our Triumph Paddock. That's the way we roll. Jason Ostrowski Friendly Ghost Racing 1969 Triumph GT6+ Racecars On Mon, Mar 20, 2017 at 3:32 PM, Bill Babcock via Fot wrote: > Oh great, you?ve furthered my aversion to Mid Ohio. I had one of the > standard fascist security schmuck experiences years ago, went and talked to > management who offered to have me arrested. Wasn?t interested in returning. > Heard everything was better. I think there are are plenty of other tracks > and other events. I know this was probably more of an SVRA issue than a Mid > Ohio issue, but still... Besides, if I went there and everything wasn?t > peachy I?d hate myself . > > Bill > > > > On Mar 19, 2017, at 5:53 PM, Mike Jackson via Fot > wrote: > > > > Last year we went to mid Ohio for the first time in nearly a decade, > SVRA had hired some local tech guys. Probably SCCA. They did not > understand vintage cars and there did not seem to be any mgmt guidance. > After nearly 30 min of arguing and further dismantling of my car to try and > satisfy him, I was about ready to load up and leave. Seriously. Just > before I did so, some one showed up, did not introduce himself but said I > could go. I didn't bother to ask for anyone to sign my logbook, just took > my sticker and went back to the good old Triumph tree in the grass > paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and > all the rest of the huge crowd of TRs that used to go. > > > > Mike Jackson > > > > -----Original Message----- > >> From: Paul Ricco via Fot > >> Sent: Mar 19, 2017 3:27 PM > >> To: John Hasty > >> Cc: "fot at autox.team.net" > >> Subject: Re: [Fot] Midwest contingent May race? > >> > >> Tony, > >> > >> We used to really enjoy the Spring race at Road America and we are > really trying to have a good relationship with SVRA. Although the > registerers and admin staff at SVRA have been TERRIFIC to deal with, some > other areas of the staff have been far less than satisfactory. Tony is > alway nice to us when we see him. However, we have gotten the royal run > around in another area by SVRA. I am not a happy member at this time. We > renewed are SVRA membership for 1 more year and we are going to give SVRA > RA event another run this year. If we do not have a great experience > (weather excluded, because they do not control that), we will done with > SVRA and the Spring event at RA until another organization starts running > the event. > >> > >> Paul > >> > >>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot > wrote: > >>> > >>> VRG Summit Point in May for us > >>> > >>> Sent from my iPhone > >>> > >>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" > wrote: > >>>> > >>>> I'm not sure what race to choose for May (doing VIR Wild Hare in > April, awesome way to start the season). What are the other Midwest FOT > looking at? I wasn't impressed with SVRA's rendition of Road America last > year (that's my default May race). Tech was a pain, turnout was low, > weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing > Gingerman with VSCDA instead? Or other options? > >>>> > >>>> Thanks, Tony Drews > >>>> > >>>> vroom, vroom > >>>> > >>>> _______________________________________________ > >>>> fot at autox.team.net > >>>> > >>>> http://www.fot-racing.com > >>>> > >>>> Donate: http://www.team.net/donate.html > >>>> Archive: http://www.team.net/archive > >>>> Forums: http://www.team.net/forums > >>>> Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/jhasty at mhc-law.com > >>>> > >>>> > >>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been > sent by a law firm on a legal matter. It may contain information that is > confidential, privileged, proprietary, or otherwise legally exempt from > disclosure. If you are not the intended recipient, you are hereby notified > that you are not authorized to read, print, retain, copy or disseminate > this message, any part of it, or any attachments. If you have received this > message in error, please delete this message and any attachments from your > system without reading the content and notify the sender immediately of the > inadvertent transmission. There is no intent on the part of the sender to > waive any privilege, including the attorney-client privilege, that may > attach to this communication. Thank you for your cooperation. 11 U.S.C. > 528(a)(4) NOTICE. We are a debt relief agency. We help people file for > bankruptcy relief under the federal Bankruptcy Code. > >>> > >>> _______________________________________________ > >>> fot at autox.team.net > >>> > >>> http://www.fot-racing.com > >>> > >>> Donate: http://www.team.net/donate.html > >>> Archive: http://www.team.net/archive > >>> Forums: http://www.team.net/forums > >>> Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/paulricco at att.net > >>> > >>> > >> > >> _______________________________________________ > >> fot at autox.team.net > >> > >> http://www.fot-racing.com > >> > >> Donate: http://www.team.net/donate.html > >> Archive: http://www.team.net/archive > >> Forums: http://www.team.net/forums > >> Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/grandwazoo at earthlink.net > >> > >> > > _______________________________________________ > > fot at autox.team.net > > > > http://www.fot-racing.com > > > > Donate: http://www.team.net/donate.html > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/bill at ponostyle.com > > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason@ > multivintage.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jerryvv at roadrunner.com Tue Mar 21 07:33:37 2017 From: jerryvv at roadrunner.com (jerryvv at roadrunner.com) Date: Tue, 21 Mar 2017 9:33:37 -0400 Subject: [Fot] May Racing Hello Jeff, My cousin and I are attending the April race at VIR along with several other WPTA Folks. Do you have any extra Crew Passes? Or can we pay for extra crew on your registration? I'd need 2. Hope all is well. JVV ---- Jeff Snook via Fot wrote: Tony, I?m in the same quandary, RA or Summit Point. RA is a little closer for me to haul to, but not by much. Based on what you said about the May RA weather ( I remember unloading many years ago for this event and there was snow on the ground!) I think the weather at Summit will be better. Plus we?ll see our East Coast FOT buddies at Summit! OK, I?ve made up my mind. Vroom, vroom, Jeff Snook http://www.snooksdreamcars.com 419-344-0319 From billdentin at aol.com Tue Mar 21 13:35:03 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 21 Mar 2017 15:35:03 -0400 Subject: [Fot] Midwest contingent May race? References: Amici... Starting in the mid-1980s, we used to run the SVRA's Mid-Ohio vintage event every summer. But we too pulled that plug at one point. For one thing the old Buck's watering hole had burned down, and the concrete block replacement just didn't cut it. But a bigger issue was the way the track began treating racers with early arrival access and in the competition paddock. Mid-Ohio is a fantastic track, especially for our cars, but Mid-Ohio's new management style had begun put a damper on things. The way I understand it is that the radical change occurred when Jim and Barbara Trueman's daughter took over the management. I suspect her CPAs had encouraged her to tighten things up, which she did in spades. When Jim Trueman was running things, and wife Barbara too for that matter, things were much different. Recall at one SVRA meet the temperature went through the roof, and set all kinds of records. Mid-Ohio towed trailers through the competition paddock passing out free bags of ice. Recall at the big 1992 Triumph featured event, Mid-Ohio was caught off guard when thousands of street Triumphs showed up, and they all stayed for the track party on Saturday night. It was only beans and hot dogs, but Mid-Ohio made sure that there was plenty for everyone. Not only that, but when the waiting line to get into the dinner tent strung out more then a block or so long, they drove up and down that line and passed out free cold beer. That's the way Jim and later Barbara ran things. After all, Jim Trueman was a successful business man (Red Roof Inns), and this was more his hobby than a necessary profit center. So when the daughter took over and decided it was time to tighten things up, it was shock to many race teams, and they said, "No thank you." The reaction to this attitude had serious impact on the business. I understand the straw that broke the camel's back was when CART in general, and Bobby Rahall in particular, were given trouble one week end. Bobby was always the favored son at Mid-Ohio, but they would not let him bring his Ferrari (street car) down to the competition paddock. The 'Fit hit the Shan'. "We're not coming back!" The daughter, whose name escapes me right now, got the message and contacted other tracks, like Road America, Lime Rock, etc., for advice. They had heard all the bad talk and rumors. They told her what she was doing wrong. She got the message, and changed her style. A year or so later VSCDA started running a Fall Finale event there every year. They had no serious trouble whatsoever. Mid-Ohio was glad to see us, and we were sure glad to be there. I think Mike Jackson's take that his Tech problems is correct. They were a SVRA issue. They had not schooled their Tech Inspector's on what constitutes vintage tech. It was not a Mid-Ohio track issue. Bill Dentinger On Mon, Mar 20, 2017 at 3:32 PM, Bill Babcock via Fot wrote: Oh great, you?ve furthered my aversion to Mid Ohio. I had one of the standard fascist security schmuck experiences years ago, went and talked to management who offered to have me arrested. Wasn?t interested in returning. Heard everything was better. I think there are are plenty of other tracks and other events. I know this was probably more of an SVRA issue than a Mid Ohio issue, but still... Besides, if I went there and everything wasn?t peachy I?d hate myself . Bill > On Mar 19, 2017, at 5:53 PM, Mike Jackson via Fot wrote: > > Last year we went to mid Ohio for the first time in nearly a decade, SVRA had hired some local tech guys. Probably SCCA. They did not understand vintage cars and there did not seem to be any mgmt guidance. After nearly 30 min of arguing and further dismantling of my car to try and satisfy him, I was about ready to load up and leave. Seriously. Just before I did so, some one showed up, did not introduce himself but said I could go. I didn't bother to ask for anyone to sign my logbook, just took my sticker and went back to the good old Triumph tree in the grass paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd of TRs that used to go. > > Mike Jackson > -------------- next part -------------- An HTML attachment was scrubbed... URL: From biznzman at pacbell.net Tue Mar 21 14:40:45 2017 From: biznzman at pacbell.net (STEPHEN BOROWSKI) Date: Tue, 21 Mar 2017 20:40:45 +0000 (UTC) Subject: [Fot] TR4 Motor Mount Question References: <110843590.1155706.1490128845705.ref@mail.yahoo.com> Hello All,Which is the better engine mount for racing, Rubber or Polyurethane?? Round or Square? Transmission Mount? Thxs. Steve TR4 Racer -------------- next part -------------- An HTML attachment was scrubbed... URL: From triosan at gmail.com Tue Mar 21 18:23:37 2017 From: triosan at gmail.com (Chuck Arnold and/or Kathleen Kelley) Date: Tue, 21 Mar 2017 17:23:37 -0700 Subject: [Fot] Nissan Diff for Goodparts conversion I have a limited slip differential from an Infinity available. It is for use with the Goodparts kit. I have had the driving flange machined to fit the triumph drive shaft u-joint. It has about a3.5 or 3.6:1 ratio. I used it in my race car for a couple of weekends, but decided to use the 4.1:1 version instead when I installed an overdrive transmission. If anyone is interested in buying this, let me know. We can discuss price and shipping options then. Thanks, Chuck Arnold -------------- next part -------------- An HTML attachment was scrubbed... URL: From tlizzard at msn.com Tue Mar 21 19:35:53 2017 From: tlizzard at msn.com (Terry Stetler) Date: Wed, 22 Mar 2017 01:35:53 +0000 Subject: [Fot] Midwest contingent May race? The name you seek Bill is Michelle Truman. Now I believe Mid Ohio is owned by one of the conglomerates that owns several other ?venues? as they call them now. Terry Stetler Sent from Mail for Windows 10 -------------- next part -------------- An HTML attachment was scrubbed... URL: From tony at tonydrews.com Tue Mar 21 20:49:25 2017 From: tony at tonydrews.com (Tony Drews) Date: Tue, 21 Mar 2017 21:49:25 -0500 Subject: [Fot] Midwest contingent May race? mail.com> References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> <5DDA8065-B8B8-4D1F-BE00-9570F53F6BCF@ponostyle.com> Didn't really mean to start a SVRA bashing session. Summit Point would be fun but is a bit far - I'm doing VIR in April (Wild Hare, FANTASTIC race) which is a 2 day tow, Summit would be another 2 day tow. Gingerman is looking like the contender at this point. Now that I said I hadn't planned on this being an SVRA bashing session, I'll mention specifically my issues with the last SVRA event. I've race with them before and was fine with them - a bit expensive but we're not in this because it's cheap. At Tech inspection, they found a possibly serious issue with my car. I was very grateful for that. But the also nitpicked the heck out of other stuff, said my 2.1 year old belts were expired and I'd need to replace them before running with them again (that cost me a couple of hundred for "FIA" belts which I hate, but have the 5 year SVRA-approved life), made me get my HANS device recertified ($140 for nothing that improved my safety), made me plug up a water drain hole in the floor of my car because it was a firewall fire issue (this is very outer edge just behind front tire, would have to have a frickin' bonfire going before it made it to THAT hole). It was an SCCA inspection, not a Vintage inspection. Multiple guys in white coveralls for good visual effect. He had to check with the chief on whether they thought my fuel cell was OK (it was). To be fair, they DID supply me with tape to cover the firewall holes and did stick around a few extra minutes for round 2 of tech so I could actually race (at 8 am the next morning). One of my buddies at the track was going for "Era Correct" certification (or whatever they called it) and they said his gauges looked too "modern" and they would all have to be replaced to get that rating. They are correctly sized gauges, nothing notably "modern" looking about them but not white faced jaeger gauges. While it didn't directly affect me, it angered me - why make someone spend $500 or more on gauges that work the same and look slightly different? And, the scheduling of the sessions made it clear that our group was not what they wanted to feature. We were first or 2nd out, racing was done very early in the day on Sunday. They did do a "podium" for the top 3 in each race, I was going to make that in one of my races before I broke a rear axle. That was cool (the podium, not breaking the axle). What's interesting is the tech guys who I didn't take a real shine to stuck around and were part of the cheering section for guys who made the podium. The party they had was fine, the head of SVRA (Tony P) wandered around and seemed to be a decent fellow. So it was an odd mix of high hassle factor upon arrival, weird scheduling but some extra touches that were nice. I guess it proves the old "first impressions" saying. Wow, I wrote a book I hadn't intended to. Cheers, Tony Drews From gasket.works at gte.net Wed Mar 22 18:20:35 2017 From: gasket.works at gte.net (Mordy Dunst) Date: Wed, 22 Mar 2017 20:20:35 -0400 Subject: [Fot] Nissan Diff for Goodparts conversion References: Yes interested MDunst Headgasket.com 626.358.1616 T 626.628.3777 F Triple R Munitions, Inc 626.201.9471 T FFL 6,7 SOT 2 On Tuesday, March 21, 2017, Chuck Arnold and/or Kathleen Kelley via Fot wrote: I have a limited slip differential from an Infinity available. It is for use with the Goodparts kit. I have had the driving flange machined to fit the triumph drive shaft u-joint. It has about a3.5 or 3.6:1 ratio. I used it in my race car for a couple of weekends, but decided to use the 4.1:1 version instead when I installed an overdrive transmission. If anyone is interested in buying this, let me know. We can discuss price and shipping options then. Thanks, Chuck Arnold _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive From johnstydo at gmail.com Thu Mar 23 05:59:21 2017 From: johnstydo at gmail.com (John Styduhar) Date: Thu, 23 Mar 2017 07:59:21 -0400 Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> <5DDA8065-B8B8-4D1F-BE00-9570F53F6BCF@ponostyle.com> The May racing event for me is the Jefferson 500 at Summit Point sanctioned by the Vintage Racer Group. No surprises from track officials or tech inspection from my experience. As for SVRA at Mid-Ohio, I would return if it my schedule permitted. The track is awesome and close to home. Jason, what should we expect from VSCDA at far as tech inspection for the Blackhawk Farms and the Kastner Cup? On Mon, Mar 20, 2017 at 7:35 PM, Jason Ostrowski via Fot wrote: > On the positive side... > When it comes to Blackhawk Farms, > It is the exact opposite. > We have had some truly epic parties there over the years. > Things have happened there that people should have been arrested for. > > Yet, What happens at Blackhawk Stays At Blackhawk. > No one from the track ever plays cop. > Another reason to attend the Kastner Cup this year. > Spoiler alert.... > Brian and I are Actually building a full scale tavern style bar For our > Triumph Paddock. > That's the way we roll. > > Jason Ostrowski > Friendly Ghost Racing > 1969 Triumph GT6+ Racecars > > On Mon, Mar 20, 2017 at 3:32 PM, Bill Babcock via Fot > wrote: > >> Oh great, you?ve furthered my aversion to Mid Ohio. I had one of the >> standard fascist security schmuck experiences years ago, went and talked to >> management who offered to have me arrested. Wasn?t interested in returning. >> Heard everything was better. I think there are are plenty of other tracks >> and other events. I know this was probably more of an SVRA issue than a Mid >> Ohio issue, but still... Besides, if I went there and everything wasn?t >> peachy I?d hate myself . >> >> Bill >> >> >> > On Mar 19, 2017, at 5:53 PM, Mike Jackson via Fot >> wrote: >> > >> > Last year we went to mid Ohio for the first time in nearly a decade, >> SVRA had hired some local tech guys. Probably SCCA. They did not >> understand vintage cars and there did not seem to be any mgmt guidance. >> After nearly 30 min of arguing and further dismantling of my car to try and >> satisfy him, I was about ready to load up and leave. Seriously. Just >> before I did so, some one showed up, did not introduce himself but said I >> could go. I didn't bother to ask for anyone to sign my logbook, just took >> my sticker and went back to the good old Triumph tree in the grass >> paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and >> all the rest of the huge crowd of TRs that used to go. >> > >> > Mike Jackson >> > >> > -----Original Message----- >> >> From: Paul Ricco via Fot >> >> Sent: Mar 19, 2017 3:27 PM >> >> To: John Hasty >> >> Cc: "fot at autox.team.net" >> >> Subject: Re: [Fot] Midwest contingent May race? >> >> >> >> Tony, >> >> >> >> We used to really enjoy the Spring race at Road America and we are >> really trying to have a good relationship with SVRA. Although the >> registerers and admin staff at SVRA have been TERRIFIC to deal with, some >> other areas of the staff have been far less than satisfactory. Tony is >> alway nice to us when we see him. However, we have gotten the royal run >> around in another area by SVRA. I am not a happy member at this time. We >> renewed are SVRA membership for 1 more year and we are going to give SVRA >> RA event another run this year. If we do not have a great experience >> (weather excluded, because they do not control that), we will done with >> SVRA and the Spring event at RA until another organization starts running >> the event. >> >> >> >> Paul >> >> >> >>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot >> wrote: >> >>> >> >>> VRG Summit Point in May for us >> >>> >> >>> Sent from my iPhone >> >>> >> >>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" < >> fot at autox.team.net> wrote: >> >>>> >> >>>> I'm not sure what race to choose for May (doing VIR Wild Hare in >> April, awesome way to start the season). What are the other Midwest FOT >> looking at? I wasn't impressed with SVRA's rendition of Road America last >> year (that's my default May race). Tech was a pain, turnout was low, >> weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing >> Gingerman with VSCDA instead? Or other options? >> >>>> >> >>>> Thanks, Tony Drews >> >>>> >> >>>> vroom, vroom >> >>>> >> >>>> _______________________________________________ >> >>>> fot at autox.team.net >> >>>> >> >>>> http://www.fot-racing.com >> >>>> >> >>>> Donate: http://www.team.net/donate.html >> >>>> Archive: http://www.team.net/archive >> >>>> Forums: http://www.team.net/forums >> >>>> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/fot/jhasty at mhc-law.com >> >>>> >> >>>> >> >>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been >> sent by a law firm on a legal matter. It may contain information that is >> confidential, privileged, proprietary, or otherwise legally exempt from >> disclosure. If you are not the intended recipient, you are hereby notified >> that you are not authorized to read, print, retain, copy or disseminate >> this message, any part of it, or any attachments. If you have received this >> message in error, please delete this message and any attachments from your >> system without reading the content and notify the sender immediately of the >> inadvertent transmission. There is no intent on the part of the sender to >> waive any privilege, including the attorney-client privilege, that may >> attach to this communication. Thank you for your cooperation. 11 U.S.C. >> 528(a)(4) NOTICE. We are a debt relief agency. We help people file for >> bankruptcy relief under the federal Bankruptcy Code. >> >>> >> >>> _______________________________________________ >> >>> fot at autox.team.net >> >>> >> >>> http://www.fot-racing.com >> >>> >> >>> Donate: http://www.team.net/donate.html >> >>> Archive: http://www.team.net/archive >> >>> Forums: http://www.team.net/forums >> >>> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/fot/paulricco at att.net >> >>> >> >>> >> >> >> >> _______________________________________________ >> >> fot at autox.team.net >> >> >> >> http://www.fot-racing.com >> >> >> >> Donate: http://www.team.net/donate.html >> >> Archive: http://www.team.net/archive >> >> Forums: http://www.team.net/forums >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/fot/grandwazoo at earthlink.net >> >> >> >> >> > _______________________________________________ >> > fot at autox.team.net >> > >> > http://www.fot-racing.com >> > >> > Donate: http://www.team.net/donate.html >> > Archive: http://www.team.net/archive >> > Forums: http://www.team.net/forums >> > Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/fot/bill at ponostyle.com >> > >> > >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/fot/jason at multivintage.com >> >> >> > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/johnstydo at gmail.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cudapilot at comcast.net Thu Mar 23 06:54:22 2017 From: cudapilot at comcast.net (Brian Garcia) Date: Thu, 23 Mar 2017 07:54:22 -0500 (CDT) Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net> <5DDA8065-B8B8-4D1F-BE00-9570F53F6BCF@ponostyle.com> John- You will find VSCDA very easy to work with at tech. Dave Young has been their chief of Tech for a long time. Dave is a friendly guy that has a true passion for the sport and gets the Vintage spirit. He and his team are not there to make anyone's day difficult. Just want people to be safe and have fun. My only complaint ever with VSCDA tech is they were so friendly and chatty that I almost missed my first session because they were chatting about my Barracuda and how their sister had one just like it growing up etc. etc. We lost track of time talking cars. That's never a bad thing ;) Brian > On March 23, 2017 at 6:59 AM John Styduhar via Fot wrote: > > The May racing event for me is the Jefferson 500 at Summit Point sanctioned by the Vintage Racer Group. No surprises from track officials or tech inspection from my experience. As for SVRA at Mid-Ohio, I would return if it my schedule permitted. The track is awesome and close to home. > Jason, what should we expect from VSCDA at far as tech inspection for the Blackhawk Farms and the Kastner Cup? > > On Mon, Mar 20, 2017 at 7:35 PM, Jason Ostrowski via Fot wrote: > > > > On the positive side... > > When it comes to Blackhawk Farms, > > It is the exact opposite. > > We have had some truly epic parties there over the years. > > Things have happened there that people should have been arrested for. > > > > Yet, What happens at Blackhawk Stays At Blackhawk. > > No one from the track ever plays cop. > > Another reason to attend the Kastner Cup this year. > > Spoiler alert.... > > Brian and I are Actually building a full scale tavern style bar For our Triumph Paddock. > > That's the way we roll. > > > > Jason Ostrowski > > Friendly Ghost Racing > > 1969 Triumph GT6+ Racecars > > > > On Mon, Mar 20, 2017 at 3:32 PM, Bill Babcock via Fot wrote: > > > > > > > Oh great, you?ve furthered my aversion to Mid Ohio. I had one of the standard fascist security schmuck experiences years ago, went and talked to management who offered to have me arrested. Wasn?t interested in returning. Heard everything was better. I think there are are plenty of other tracks and other events. I know this was probably more of an SVRA issue than a Mid Ohio issue, but still... Besides, if I went there and everything wasn?t peachy I?d hate myself . > > > > > > Bill > > > > > > > > > > On Mar 19, 2017, at 5:53 PM, Mike Jackson via Fot wrote: > > > > > > > > Last year we went to mid Ohio for the first time in nearly a decade, SVRA had hired some local tech guys. Probably SCCA. They did not understand vintage cars and there did not seem to be any mgmt guidance. After nearly 30 min of arguing and further dismantling of my car to try and satisfy him, I was about ready to load up and leave. Seriously. Just before I did so, some one showed up, did not introduce himself but said I could go. I didn't bother to ask for anyone to sign my logbook, just took my sticker and went back to the good old Triumph tree in the grass paddock. I miss those days with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd of TRs that used to go. > > > > > > > > Mike Jackson > > > > > > > > -----Original Message----- > > > >> From: Paul Ricco via Fot > > > >> Sent: Mar 19, 2017 3:27 PM > > > >> To: John Hasty > > > >> Cc: "fot at autox.team.net mailto:fot at autox.team.net " > > > >> Subject: Re: [Fot] Midwest contingent May race? > > > >> > > > >> Tony, > > > >> > > > >> We used to really enjoy the Spring race at Road America and we are really trying to have a good relationship with SVRA. Although the registerers and admin staff at SVRA have been TERRIFIC to deal with, some other areas of the staff have been far less than satisfactory. Tony is alway nice to us when we see him. However, we have gotten the royal run around in another area by SVRA. I am not a happy member at this time. We renewed are SVRA membership for 1 more year and we are going to give SVRA RA event another run this year. If we do not have a great experience (weather excluded, because they do not control that), we will done with SVRA and the Spring event at RA until another organization starts running the event. > > > >> > > > >> Paul > > > >> > > > >>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot wrote: > > > >>> > > > >>> VRG Summit Point in May for us > > > >>> > > > >>> Sent from my iPhone > > > >>> > > > >>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" wrote: > > > >>>> > > > >>>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, awesome way to start the season). What are the other Midwest FOT looking at? I wasn't impressed with SVRA's rendition of Road America last year (that's my default May race). Tech was a pain, turnout was low, weather was mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman with VSCDA instead? Or other options? > > > >>>> > > > >>>> Thanks, Tony Drews > > > >>>> > > > >>>> vroom, vroom > > > >>>> > > > >>>> _______________________________________________ > > > >>>> fot at autox.team.net mailto:fot at autox.team.net > > > >>>> > > > >>>> http://www.fot-racing.com > > > >>>> > > > >>>> Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > > >>>> Archive: http://www.team.net/archive > > > >>>> Forums: http://www.team.net/forums > > > >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com > > > >>>> > > > >>>> > > > >>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. > > > >>> > > > >>> _______________________________________________ > > > >>> fot at autox.team.net mailto:fot at autox.team.net > > > >>> > > > >>> http://www.fot-racing.com > > > >>> > > > >>> Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > > >>> Archive: http://www.team.net/archive > > > >>> Forums: http://www.team.net/forums > > > >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net http://autox.team.net/mailman/options/fot/paulricco at att.net > > > >>> > > > >>> > > > >> > > > >> _______________________________________________ > > > >> fot at autox.team.net mailto:fot at autox.team.net > > > >> > > > >> http://www.fot-racing.com > > > >> > > > >> Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > > >> Archive: http://www.team.net/archive > > > >> Forums: http://www.team.net/forums > > > >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net > > > >> > > > >> > > > > _______________________________________________ > > > > fot at autox.team.net mailto:fot at autox.team.net > > > > > > > > http://www.fot-racing.com > > > > > > > > Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > > > Archive: http://www.team.net/archive > > > > Forums: http://www.team.net/forums > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > > > > > > > > > > > > > _______________________________________________ > > > fot at autox.team.net mailto:fot at autox.team.net > > > > > > http://www.fot-racing.com > > > > > > Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > > Archive: http://www.team.net/archive > > > Forums: http://www.team.net/forums > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason at multivintage.com http://autox.team.net/mailman/options/fot/jason at multivintage.com > > > > > > > > > > > > > > > > > > _______________________________________________ > > fot at autox.team.net mailto:fot at autox.team.net > > > > http://www.fot-racing.com > > > > Donate: http://www.team.net/donate.html http://www.team.net/donate.html > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo at gmail.com http://autox.team.net/mailman/options/fot/johnstydo at gmail.com > > > > > > > > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/cudapilot at comcast.net > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From timmmurphh at gmail.com Thu Mar 23 09:17:06 2017 From: timmmurphh at gmail.com (timmmurphh at gmail.com) Date: Thu, 23 Mar 2017 10:17:06 -0500 Subject: [Fot] FW: TR4 Motor Mount Question References: <110843590.1155706.1490128845705.ref@mail.yahoo.com> <110843590.1155706.1490128845705@mail.yahoo.com> <002401d2a345$82085220$8618f660$@gmail.com> From: timmmurphh at gmail.com [mailto:timmmurphh at gmail.com] Sent: Wednesday, March 22, 2017 2:50 PM To: 'STEPHEN BOROWSKI' Subject: RE: [Fot] TR4 Motor Mount Question We at first tried the square ones from Moss and broke two sets of them, once going into Canada Corner at RA and the throttle got open wide. Not good. Then we got a set of round ones through Tony Drews from I think Cambridge in England. That was about 8 years ago, and no problems. Strongly recommend them. About $50 a set at that time but the postage is about $50 from England. Maybe you can tie up with someone who also needs some parts from England. You might try Steve Yott. I think he gets somewhat regular shipments in from England. Tim Murphy TR4 #317 BRG From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of STEPHEN BOROWSKI via Fot Sent: Tuesday, March 21, 2017 3:41 PM Subject: [Fot] TR4 Motor Mount Question Hello All, Which is the better engine mount for racing, Rubber or Polyurethane? Round or Square? Transmission Mount? Thxs. Steve TR4 Racer -------------- next part -------------- An HTML attachment was scrubbed... URL: From biznzman at pacbell.net Thu Mar 23 13:57:25 2017 From: biznzman at pacbell.net (STEPHEN BOROWSKI) Date: Thu, 23 Mar 2017 19:57:25 +0000 (UTC) Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <2133858857.2931664.1490299045559.ref@mail.yahoo.com> Hello All,What do you recommend for a race flywheel, Pressure Plate and Disk?My existing is a lightened stock flywheel with a diaphragm type (Porsche) pressure plate. Also has anyone used the hydraulic throw out bearing devise? Is it worth it? Thanks,SteveFL TR4 racer -------------- next part -------------- An HTML attachment was scrubbed... URL: From tony at tonydrews.com Thu Mar 23 21:49:17 2017 From: tony at tonydrews.com (Tony Drews) Date: Thu, 23 Mar 2017 22:49:17 -0500 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <2133858857.2931664.1490299045559.ref@mail.yahoo.com> <2133858857.2931664.1490299045559@mail.yahoo.com> Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of steel ones similar to what's sold by Cambridge made a while back, weighs the same and doesn't have the tendency to come loose from the crank like the alloy ones do. Looks like this but for a TR4: http://www.cambridgemotorsport.com/partsxx/cm6953 I use a diaphragm pressure plate like you describe with a heavy duty clutch disk. The annular hydraulic throwout bearing is cool, but if you have any kind of failure you have to pull the tranny. For that reason I converted from a very cool setup like that back to stock - so if the slave cylinder went out I had half a chance of fixing it at the track. Regards, Tony Drews At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: >Hello All, >What do you recommend for a race flywheel, Pressure Plate and Disk? >My existing is a lightened stock flywheel with a diaphragm type >(Porsche) pressure plate. > >Also has anyone used the hydraulic throw out bearing devise? Is it worth it? > >Thanks, >Steve >FL TR4 racer > >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: >http://autox.team.net/mailman/options/fot/tony at tonydrews.com From tony at tonydrews.com Thu Mar 23 21:50:22 2017 From: tony at tonydrews.com (Tony Drews) Date: Thu, 23 Mar 2017 22:50:22 -0500 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <2133858857.2931664.1490299045559.ref@mail.yahoo.com> <2133858857.2931664.1490299045559@mail.yahoo.com> <7.1.0.9.0.20170323224340.0e7dfd58@tonydrews.com> BTW, here's their motor mounts which I mentioned earlier: http://www.cambridgemotorsport.com/partsxx/mtc4444 Tony At 10:49 PM 3/23/2017, Tony Drews wrote: >Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of >steel ones similar to what's sold by Cambridge made a while back, >weighs the same and doesn't have the tendency to come loose from the >crank like the alloy ones do. Looks like this but for a TR4: >http://www.cambridgemotorsport.com/partsxx/cm6953 > >I use a diaphragm pressure plate like you describe with a heavy duty >clutch disk. > >The annular hydraulic throwout bearing is cool, but if you have any >kind of failure you have to pull the tranny. For that reason I >converted from a very cool setup like that back to stock - so if the >slave cylinder went out I had half a chance of fixing it at the track. > >Regards, Tony Drews > >At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: >>Hello All, >>What do you recommend for a race flywheel, Pressure Plate and Disk? >>My existing is a lightened stock flywheel with a diaphragm type >>(Porsche) pressure plate. >> >>Also has anyone used the hydraulic throw out bearing devise? Is it worth it? >> >>Thanks, >>Steve >>FL TR4 racer >> >>_______________________________________________ >>fot at autox.team.net >> >>http://www.fot-racing.com >> >>Donate: http://www.team.net/donate.html >>Archive: http://www.team.net/archive >>Forums: http://www.team.net/forums >>Unsubscribe/Manage: >>http://autox.team.net/mailman/options/fot/tony at tonydrews.com From triosan at gmail.com Thu Mar 23 21:52:42 2017 From: triosan at gmail.com (Chuck Arnold and/or Kathleen Kelley) Date: Thu, 23 Mar 2017 20:52:42 -0700 Subject: [Fot] Nissan Diff for Goodparts conversion References: <15af8895a9a-1dc7-182b2@webprd-a44.mail.aol.com> Yes, that works. On Mar 22, 2017 6:32 PM, "Mordy Dunst via Fot" wrote: > > Yes interested > MDunst Headgasket.com 626.358.1616 T 626.628.3777 F Triple R Munitions, > Inc 626.201.9471 T FFL 6,7 SOT 2 > > On Tuesday, March 21, 2017, Chuck Arnold and/or Kathleen Kelley via Fot < > fot at autox.team.net> wrote: > > I have a limited slip differential from an Infinity available. It is for > use with the Goodparts kit. I have had the driving flange machined to fit > the triumph drive shaft u-joint. It has about a3.5 or 3.6:1 ratio. > > I used it in my race car for a couple of weekends, but decided to use the > 4.1:1 version instead when I installed an overdrive transmission. > > If anyone is interested in buying this, let me know. We can discuss price > and shipping options then. > > Thanks, > > Chuck Arnold > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/gasket.works at gte.net > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/triosan at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From charly at mitchelplumbing.com Thu Mar 23 23:51:30 2017 From: charly at mitchelplumbing.com (Charly) Date: Fri, 24 Mar 2017 00:51:30 -0500 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question I belive British Parts NW has them also.steel lightweight flywheels Charly Mitchel TR6 #44 On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent: > Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of > steel ones similar to what's sold by Cambridge made a while back, > weighs the same and doesn't have the tendency to come loose from the > crank like the alloy ones do. Looks like this but for a TR4: > http://www.cambridgemotorsport.com/partsxx/cm6953 > I use a diaphragm pressure plate like you describe with a heavy duty > clutch disk. > > The annular hydraulic throwout bearing is cool, but if you have any > kind of failure you have to pull the tranny. For that reason I > converted from a very cool setup like that back to stock - so if the > slave cylinder went out I had half a chance of fixing it at the track. > > Regards, Tony Drews > > At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: > >Hello All, > >What do you recommend for a race flywheel, > Pressure Plate and Disk?>My existing is a lightened stock flywheel with a > diaphragm type >(Porsche) pressure plate. > > > >Also has anyone used the hydraulic throw out > bearing devise? Is it worth it?> > >Thanks, > >Steve > >FL TR4 racer > > > >_______________________________________________>fot at autox. > team.net> > >http://www.fot-racing.com> > >Donate: http://www.team.net/donate.html>Archive: http://www.team.net/archive>Forums: http://www.team.net/forums>Unsubscribe/Manage: > >http://autox.team.net/mailman/options/fot/tony at tonyd > rews.com > > _______________________________________________ > fot at autox. > team.net > http://www.fot-racing.com > Donate: http://www.team.net/donate.htmlArchive: http://www.team.net/archiveForums: http://www.team.net/forumsUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/ch > arly at mitchelplumbing.com > > > > From tony at tonydrews.com Fri Mar 24 00:28:49 2017 From: tony at tonydrews.com (Tony Drews) Date: Fri, 24 Mar 2017 01:28:49 -0500 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <12619.1490334690@mitchelplumbing.com> Yep, that's the ticket: https://www.bpnorthwest.com/triumph/tr3-tr4-tr4a/clutch-components/alloy-light-flywheel-tr2-tr3-tr4-tr4a.html Currently out of stock though. The aluminum one is available there and is not out of stock: https://www.bpnorthwest.com/triumph/tr3-tr4-tr4a/clutch-components/aluminum-flywheel-tr2-to-tr4a.html Regards, Tony At 12:51 AM 3/24/2017, Charly via Fot wrote: >I belive British Parts NW has them also.steel lightweight flywheels >Charly Mitchel >TR6 #44 > >On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent: > > Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of > > steel ones similar to what's sold by Cambridge made a while back, > > weighs the same and doesn't have the tendency to come loose from the > > crank like the alloy ones do. Looks like this but for a TR4: > > http://www.cambridgemotorsport.com/partsxx/cm6953 > > I use a diaphragm pressure plate like you describe with a heavy duty > > clutch disk. > > > > The annular hydraulic throwout bearing is cool, but if you have any > > kind of failure you have to pull the tranny. For that reason I > > converted from a very cool setup like that back to stock - so if the > > slave cylinder went out I had half a chance of fixing it at the track. > > > > Regards, Tony Drews > > > > At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: > > >Hello All, > > >What do you recommend for a race flywheel, > > Pressure Plate and Disk?>My existing is a lightened stock flywheel with a > > diaphragm type >(Porsche) pressure plate. > > > > > >Also has anyone used the hydraulic throw out > > bearing devise? Is it worth it?> > > >Thanks, > > >Steve > > >FL TR4 racer > > > > > >_______________________________________________>fot at autox. > > team.net> > > >http://www.fot-racing.com> > > >Donate: http://www.team.net/donate.html>Archive: > http://www.team.net/archive>Forums: >http://www.team.net/forums>Unsubscribe/Manage: > > >http://autox.team.net/mailman/options/fot/tony at tonyd > > rews.com > > > > _______________________________________________ > > fot at autox. > > team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.htmlArchive: > http://www.team.net/archiveForums: >http://www.team.net/forumsUnsubscribe/Manage: >http://autox.team.net/mailman/options/fot/ch > > arly at mitchelplumbing.com > > > > > > > > > >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: >http://autox.team.net/mailman/options/fot/tony at tonydrews.com From fmccjr at aol.com Fri Mar 24 05:27:03 2017 From: fmccjr at aol.com (Rick McCurdy) Date: Fri, 24 Mar 2017 07:27:03 -0400 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <12619.1490334690@mitchelplumbing.com> My Tr3 had an aluminum flywheel when I got it (no idea what brand, or when it was new) and I sourced the diaphragm the clutch and PP through TS Imports. So far, no problems and the clutch works like a charm! Rick McCurdy Newburgh, NY (See you at "the Cup"!) Sent from my iPad > On Mar 24, 2017, at 1:51 AM, Charly via Fot wrote: > > I belive British Parts NW has them also.steel lightweight flywheels > Charly Mitchel > TR6 #44 > > On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent: >> Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of >> steel ones similar to what's sold by Cambridge made a while back, >> weighs the same and doesn't have the tendency to come loose from the >> crank like the alloy ones do. Looks like this but for a TR4: >> http://www.cambridgemotorsport.com/partsxx/cm6953 >> I use a diaphragm pressure plate like you describe with a heavy duty >> clutch disk. >> >> The annular hydraulic throwout bearing is cool, but if you have any >> kind of failure you have to pull the tranny. For that reason I >> converted from a very cool setup like that back to stock - so if the >> slave cylinder went out I had half a chance of fixing it at the track. >> >> Regards, Tony Drews >> >> At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: >>> Hello All, >>> What do you recommend for a race flywheel, >> Pressure Plate and Disk?>My existing is a lightened stock flywheel with a >> diaphragm type >(Porsche) pressure plate. >>> >>> Also has anyone used the hydraulic throw out >> bearing devise? Is it worth it?> >>> Thanks, >>> Steve >>> FL TR4 racer >>> >>> _______________________________________________>fot at autox. >> team.net> >>> http://www.fot-racing.com> >>> Donate: http://www.team.net/donate.html>Archive: http://www.team.net/archive>Forums: > http://www.team.net/forums>Unsubscribe/Manage: >>> http://autox.team.net/mailman/options/fot/tony at tonyd >> rews.com >> >> _______________________________________________ >> fot at autox. >> team.net >> http://www.fot-racing.com >> Donate: http://www.team.net/donate.htmlArchive: http://www.team.net/archiveForums: > http://www.team.net/forumsUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/ch >> arly at mitchelplumbing.com >> >> >> >> > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fmccjr at aol.com > > From tedtsimx at bright.net Fri Mar 24 06:00:30 2017 From: tedtsimx at bright.net (Ted Schumacher) Date: Fri, 24 Mar 2017 08:00:30 -0400 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <12619.1490334690@mitchelplumbing.com> <012ADE77-B217-4CBF-B16E-01E185E550BB@aol.com> Thank you. And we do stock the alloy flywheel. Ted On 3/24/2017 7:27 AM, Rick McCurdy via Fot wrote: > My Tr3 had an aluminum flywheel when I got it (no idea what brand, or when it was new) and I sourced the diaphragm the clutch and PP through TS Imports. > So far, no problems and the clutch works like a charm! > > Rick McCurdy > Newburgh, NY > > (See you at "the Cup"!) > > Sent from my iPad > >> On Mar 24, 2017, at 1:51 AM, Charly via Fot wrote: >> >> I belive British Parts NW has them also.steel lightweight flywheels >> Charly Mitchel >> TR6 #44 >> >> On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent: >>> Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of >>> steel ones similar to what's sold by Cambridge made a while back, >>> weighs the same and doesn't have the tendency to come loose from the >>> crank like the alloy ones do. Looks like this but for a TR4: >>> http://www.cambridgemotorsport.com/partsxx/cm6953 >>> I use a diaphragm pressure plate like you describe with a heavy duty >>> clutch disk. >>> >>> The annular hydraulic throwout bearing is cool, but if you have any >>> kind of failure you have to pull the tranny. For that reason I >>> converted from a very cool setup like that back to stock - so if the >>> slave cylinder went out I had half a chance of fixing it at the track. >>> >>> Regards, Tony Drews >>> >>> At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: >>>> Hello All, >>>> What do you recommend for a race flywheel, >>> Pressure Plate and Disk?>My existing is a lightened stock flywheel with a >>> diaphragm type >(Porsche) pressure plate. >>>> Also has anyone used the hydraulic throw out >>> bearing devise? Is it worth it?> >>>> Thanks, >>>> Steve >>>> FL TR4 racer >>>> >>>> _______________________________________________>fot at autox. >>> team.net> >>>> http://www.fot-racing.com> >>>> Donate: http://www.team.net/donate.html>Archive: http://www.team.net/archive>Forums: >> http://www.team.net/forums>Unsubscribe/Manage: >>>> http://autox.team.net/mailman/options/fot/tony at tonyd >>> rews.com >>> >>> _______________________________________________ >>> fot at autox. >>> team.net >>> http://www.fot-racing.com >>> Donate: http://www.team.net/donate.htmlArchive: http://www.team.net/archiveForums: >> http://www.team.net/forumsUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/ch >>> arly at mitchelplumbing.com >>> >>> >>> >>> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fmccjr at aol.com >> >> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tedtsimx at bright.net > > > > -- Ted Schumacher tedtsimx at bright.net http://www.tsimportedautomotive.com 108 S. Jefferson St. Pandora, Ohio, USA 45877 Fax: 419.384.3272 (24 Hrs.) Phone: 800.543.6648 (US & Canada) Tech/ Gen. Information/ Worldwide: 419.384.3022 From adcronin at mi.rr.com Fri Mar 24 06:26:17 2017 From: adcronin at mi.rr.com (Dan Cronin) Date: Fri, 24 Mar 2017 08:26:17 -0400 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <2133858857.2931664.1490299045559.ref@mail.yahoo.com> <2133858857.2931664.1490299045559@mail.yahoo.com> <20170324034919.526D11022AF@relay.mailchannels.net> The alloy flywheels can be upgraded by having or installing ARP hardened steel inserts into the flywheel attaching holes which alieviates the tendancy for the holes to elongate. D On Mar 23, 2017, at 11:49 PM, Tony Drews via Fot wrote: Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of steel ones similar to what's sold by Cambridge made a while back, weighs the same and doesn't have the tendency to come loose from the crank like the alloy ones do. Looks like this but for a TR4: http://www.cambridgemotorsport.com/partsxx/cm6953 I use a diaphragm pressure plate like you describe with a heavy duty clutch disk. The annular hydraulic throwout bearing is cool, but if you have any kind of failure you have to pull the tranny. For that reason I converted from a very cool setup like that back to stock - so if the slave cylinder went out I had half a chance of fixing it at the track. Regards, Tony Drews At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: > Hello All, > What do you recommend for a race flywheel, Pressure Plate and Disk? > My existing is a lightened stock flywheel with a diaphragm type (Porsche) pressure plate. > > Also has anyone used the hydraulic throw out bearing devise? Is it worth it? > > Thanks, > Steve > FL TR4 racer > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From Spitfire_Racing at twcny.rr.com Fri Mar 24 08:03:25 2017 From: Spitfire_Racing at twcny.rr.com (Spitfire Racing) Date: Fri, 24 Mar 2017 10:03:25 -0400 Subject: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question References: <2133858857.2931664.1490299045559.ref@mail.yahoo.com> <2133858857.2931664.1490299045559@mail.yahoo.com> <20170324034919.526D11022AF@relay.mailchannels.net> <4FA015F2-6032-49FF-804B-6F00F58A3BDD@mi.rr.com> The other way to address this at least with Spitfire and GT-6 applications is to go with larger fasteners and use 8 instead of 4 and a pin. Hardened flat washers under the heads also is a good idea as is blue lock-tite. I would figure results would be similar in TR3-6 applications but I have never tried it. Works very well on 8K rpm Spitfires From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Dan Cronin via Fot Sent: Friday, March 24, 2017 8:26 AM To: Tony Drews Cc: FOT List Triumph Subject: Re: [Fot] TR4 Race Flywheel, Presure Plate and Disk Question The alloy flywheels can be upgraded by having or installing ARP hardened steel inserts into the flywheel attaching holes which alieviates the tendancy for the holes to elongate. D On Mar 23, 2017, at 11:49 PM, Tony Drews via Fot wrote: Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of steel ones similar to what's sold by Cambridge made a while back, weighs the same and doesn't have the tendency to come loose from the crank like the alloy ones do. Looks like this but for a TR4: http://www.cambridgemotorsport.com/partsxx/cm6953 I use a diaphragm pressure plate like you describe with a heavy duty clutch disk. The annular hydraulic throwout bearing is cool, but if you have any kind of failure you have to pull the tranny. For that reason I converted from a very cool setup like that back to stock - so if the slave cylinder went out I had half a chance of fixing it at the track. Regards, Tony Drews At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote: Hello All, What do you recommend for a race flywheel, Pressure Plate and Disk? My existing is a lightened stock flywheel with a diaphragm type (Porsche) pressure plate. Also has anyone used the hydraulic throw out bearing devise? Is it worth it? Thanks, Steve FL TR4 racer _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive http://autox.team.net/mailman/options/fot/tony at tonydrews.com _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive http://autox.team.net/mailman/options/fot/adcronin at mi.rr.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From jhasty at mhc-law.com Fri Mar 24 12:12:41 2017 From: jhasty at mhc-law.com (John Hasty) Date: Fri, 24 Mar 2017 18:12:41 +0000 Subject: [Fot] K Cup Brian: I just got an email from VSCDA asking for an additional $55.00 entry fee because I don't have a VSCDA license....I thought that all council club members had reciprocal licenses. Can you shed any light on this???? John H. Hasty | MULLEN HOLLAND & COOPER P.A. 301 South York Street (zip: 28052) P.O. Box 488 Gastonia, NC 28053-0488 Telephone: 704.864.6751 | Facsimile: 704.861.8394 CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. -------------- next part -------------- An HTML attachment was scrubbed... URL: From duncan.charlton54 at gmail.com Sat Mar 25 08:32:21 2017 From: duncan.charlton54 at gmail.com (Duncan Charlton) Date: Sat, 25 Mar 2017 09:32:21 -0500 Subject: [Fot] road springs Any recommendations for suppliers of custom made coil suspension springs in the US? Duncan Charlton Elgin, Texas USA From robertten1 at aol.com Sat Mar 25 13:08:45 2017 From: robertten1 at aol.com (robertten1 at aol.com) Date: Sat, 25 Mar 2017 15:08:45 -0400 Subject: [Fot] Starter Solenoid Group wisdom on Starter Solenoids for our Triumph's ? Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? Curious, Bob T '64 Spit GT autocrosser PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). -------------- next part -------------- An HTML attachment was scrubbed... URL: From tony at tonydrews.com Sat Mar 25 13:52:54 2017 From: tony at tonydrews.com (Tony Drews) Date: Sat, 25 Mar 2017 14:52:54 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> An HTML attachment was scrubbed... URL: From paulricco at att.net Sat Mar 25 14:48:57 2017 From: paulricco at att.net (Paul Ricco) Date: Sat, 25 Mar 2017 15:48:57 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> Napa auto parts has a part number ST51. We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. Good Luck, Paul Sent from my iPhone > On Mar 25, 2017, at 2:52 PM, Tony Drews via Fot wrote: > > I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. > > Tony Drews > > At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >> Group wisdom on Starter Solenoids for our Triumph's ? >> >> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >> >> Curious, >> >> Bob T >> '64 Spit GT autocrosser >> >> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tr6nut at verizon.net Sat Mar 25 15:07:06 2017 From: tr6nut at verizon.net (Hugh Barber) Date: Sat, 25 Mar 2017 17:07:06 -0400 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> If you are having issue with the Lucas solenoids, why not substitute a Ford solenoid (as originally fitted to early Mustangs and such)? I know that you can even get the Ford units in "heavy duty" versions. On 3/25/17 3:08 PM, Bob Totten via Fot wrote: > Group wisdom on Starter Solenoids for our Triumph's ? > > Who sells the better quality Lucas (?) units as my starting problem > has pointed to the solenoid is not functioning properly. Would also > be interested in learning about any alternative brand that would be > better in the long run. In 20 years of running my Spit my 5th unit is > on the fritz or is that the life span for these things? > > Curious, > > Bob T > '64 Spit GT autocrosser > > PS I have inspected and tested the starter, and had it tested at the > local Advance Auto Parts and it functions just fine(?). > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr6nut at verizon.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ponobill at gmail.com Sat Mar 25 17:32:30 2017 From: ponobill at gmail.com (Bill Babcock) Date: Sat, 25 Mar 2017 16:32:30 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. > On Mar 25, 2017, at 1:48 PM, Paul Ricco via Fot wrote: > > Napa auto parts has a part number ST51. > > We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. > > I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. > > Good Luck, > > Paul > > Sent from my iPhone > > >> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >> >> Tony Drews >> >> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>> Group wisdom on Starter Solenoids for our Triumph's ? >>> >>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>> >>> Curious, >>> >>> Bob T >>> '64 Spit GT autocrosser >>> >>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >> _______________________________________________ >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >> >> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dlhogye at comcast.net Sat Mar 25 17:52:24 2017 From: dlhogye at comcast.net (Dave) Date: Sat, 25 Mar 2017 16:52:24 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> I'm glad someone else responded with the Ford recommendation. That is exactly what I was thinking. I'd bet that just about every Ford from the 60s through the 70s had the same solenoid. Dave H. Sent from my iPad > On Mar 25, 2017, at 1:48 PM, Paul Ricco via Fot wrote: > > Napa auto parts has a part number ST51. > > We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. > > I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. > > Good Luck, > > Paul > > Sent from my iPhone > >> On Mar 25, 2017, at 2:52 PM, Tony Drews via Fot wrote: >> >> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >> >> Tony Drews >> >> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>> Group wisdom on Starter Solenoids for our Triumph's ? >>> >>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>> >>> Curious, >>> >>> Bob T >>> '64 Spit GT autocrosser >>> >>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dlhogye at comcast.net Sat Mar 25 18:21:36 2017 From: dlhogye at comcast.net (Dave) Date: Sat, 25 Mar 2017 17:21:36 -0700 Subject: [Fot] TR4 frame and body needed. Hello Friends, Our friend Jon Gannaway's email address is currently not linked to the FoT. He has asked me to write to the group. He is looking for a TR4 frame and body. Most unfortunately, he wrecked his car at Laguna last weekend. He was not hurt. He impacted a concrete barrier exiting the Corkscrew. I was there, the car is badly bent. Jon would like to find another car to transfer his drivetrain to. An ex-race car would be preferred. Please write or call Jon if you know of a possibility at, itbjon at gmail.com, or 831-402-4080. Thanks, Dave H. Sent from my iPad From duncan.charlton54 at gmail.com Sat Mar 25 19:28:08 2017 From: duncan.charlton54 at gmail.com (Duncan Charlton) Date: Sat, 25 Mar 2017 20:28:08 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> Unless? We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. Duncan Charlton Elgin, Texas USA > On Mar 25, 2017, at 6:32 PM, Bill Babcock via Fot wrote: > > Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. > > >> >> Napa auto parts has a part number ST51. >> >> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >> >> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >> >> Good Luck, >> >> Paul >> >> Sent from my iPhone >> >> >>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>> >>> Tony Drews >>> >>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>> >>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>> >>>> Curious, >>>> >>>> Bob T >>>> '64 Spit GT autocrosser >>>> >>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>> _______________________________________________ >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>> >>> >> _______________________________________________ >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >> >> > > _______________________________________________ > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From ponobill at gmail.com Sat Mar 25 21:05:39 2017 From: ponobill at gmail.com (Bill Babcock) Date: Sat, 25 Mar 2017 20:05:39 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> If you short across the big terminals you eliminate the integrated solenoid. I have seen people bypass the integrated solenoid and use an external one, but my experience with the gear reduction starters is that they fail in the connection to the field coil, and rarely anywhere else. > On Mar 25, 2017, at 6:28 PM, Duncan Charlton via Fot wrote: > > Unless? > > We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. > > The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. > > Duncan Charlton > Elgin, Texas USA > > > >> >> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. >> >> >>> >>> Napa auto parts has a part number ST51. >>> >>> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >>> >>> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >>> >>> Good Luck, >>> >>> Paul >>> >>> Sent from my iPhone >>> >>> >>>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>>> >>>> Tony Drews >>>> >>>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>>> >>>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>>> >>>>> Curious, >>>>> >>>>> Bob T >>>>> '64 Spit GT autocrosser >>>>> >>>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>>> _______________________________________________ >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>>> _______________________________________________ >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>>> >>>> >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>> >>> >> >> _______________________________________________ >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From duncan.charlton54 at gmail.com Sun Mar 26 06:18:24 2017 From: duncan.charlton54 at gmail.com (Duncan Charlton) Date: Sun, 26 Mar 2017 07:18:24 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> Your?re right ? what I meant to say was that I shorted from the terminal with the incoming heavy lead to the small terminal that has the starter switch lead on it. That activates the solenoid rather than bypassing it, which likely simply spins the starter motor and doesn?t move the bendix. Duncan Charlton Elgin, Texas USA > On Mar 25, 2017, at 10:05 PM, Bill Babcock wrote: > > If you short across the big terminals you eliminate the integrated solenoid. > > I have seen people bypass the integrated solenoid and use an external one, but my experience with the gear reduction starters is that they fail in the connection to the field coil, and rarely anywhere else. >> >> Unless? >> >> We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. >> >> The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. >> >> Duncan Charlton >> Elgin, Texas USA >> >> >> >>> >>> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. >>> >>> >>>> >>>> Napa auto parts has a part number ST51. >>>> >>>> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >>>> >>>> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >>>> >>>> Good Luck, >>>> >>>> Paul >>>> >>>> Sent from my iPhone >>>> >>>> >>>>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>>>> >>>>> Tony Drews >>>>> >>>>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>>>> >>>>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>>>> >>>>>> Curious, >>>>>> >>>>>> Bob T >>>>>> '64 Spit GT autocrosser >>>>>> >>>>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>>>> _______________________________________________ >>>>>> >>>>>> http://www.fot-racing.com >>>>>> >>>>>> Donate: http://www.team.net/donate.html >>>>>> Archive: http://www.team.net/archive >>>>>> Forums: http://www.team.net/forums >>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>>>> _______________________________________________ >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>>>> >>>>> >>>> _______________________________________________ >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>> >>>> >>> >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com >> _______________________________________________ >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ponobill at gmail.com Sun Mar 26 08:32:00 2017 From: ponobill at gmail.com (Bill Babcock) Date: Sun, 26 Mar 2017 07:32:00 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> Ah, you?re thinking that the integrated solenoid makes the starter gear engage. no, it?s just a high-current relay?functionally identical to the separate solenoid the old Luca unit uses. I can?t think of a purpose to have a second solenoid?don?t know why they call that particular relay a Solenoid . The bendix engages by drag on a helical actuator. Purely mechanical in every starter I?ve ever seen. > On Mar 26, 2017, at 5:18 AM, Duncan Charlton via Fot wrote: > > Your?re right ? what I meant to say was that I shorted from the terminal with the incoming heavy lead to the small terminal that has the starter switch lead on it. That activates the solenoid rather than bypassing it, which likely simply spins the starter motor and doesn?t move the bendix. > > Duncan Charlton > Elgin, Texas USA > > > >> >> If you short across the big terminals you eliminate the integrated solenoid. >> >> I have seen people bypass the integrated solenoid and use an external one, but my experience with the gear reduction starters is that they fail in the connection to the field coil, and rarely anywhere else. >>> >>> Unless? >>> >>> We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. >>> >>> The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. >>> >>> Duncan Charlton >>> Elgin, Texas USA >>> >>> >>> >>>> >>>> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. >>>> >>>> >>>>> >>>>> Napa auto parts has a part number ST51. >>>>> >>>>> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >>>>> >>>>> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >>>>> >>>>> Good Luck, >>>>> >>>>> Paul >>>>> >>>>> Sent from my iPhone >>>>> >>>>> >>>>>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>>>>> >>>>>> Tony Drews >>>>>> >>>>>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>>>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>>>>> >>>>>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>>>>> >>>>>>> Curious, >>>>>>> >>>>>>> Bob T >>>>>>> '64 Spit GT autocrosser >>>>>>> >>>>>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>>>>> _______________________________________________ >>>>>>> >>>>>>> http://www.fot-racing.com >>>>>>> >>>>>>> Donate: http://www.team.net/donate.html >>>>>>> Archive: http://www.team.net/archive >>>>>>> Forums: http://www.team.net/forums >>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>>>>> _______________________________________________ >>>>>> >>>>>> http://www.fot-racing.com >>>>>> >>>>>> Donate: http://www.team.net/donate.html >>>>>> Archive: http://www.team.net/archive >>>>>> Forums: http://www.team.net/forums >>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>>>>> >>>>>> >>>>> _______________________________________________ >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>> >>> >> > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From duncan.charlton54 at gmail.com Sun Mar 26 08:40:50 2017 From: duncan.charlton54 at gmail.com (Duncan Charlton) Date: Sun, 26 Mar 2017 09:40:50 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> <0BB098FC-7596-4EDC-A3EC-074D9D779F80@gmail.com> Oh, I see ? you?re referring to an ?inertia? starter motor. The "integral? solenoid I?m referring to is the type that?s mounted to a pre-engaged starter motor, thus ?integrated? with the starter motor unit, ie: built-in. The ones I?ve disassembled had a piston inside that was moved by an electromagnet when the lead from the ignition switch provides 12V, and the piston simultaneously moves a linkage that shifts the bendix gear into position against the ring gear while closing the circuit on the two heavy contacts connecting the battery with the electric motor, causing it to spin. Duncan Charlton Elgin, Texas USA > On Mar 26, 2017, at 9:32 AM, Bill Babcock wrote: > > Ah, you?re thinking that the integrated solenoid makes the starter gear engage. no, it?s just a high-current relay?functionally identical to the separate solenoid the old Luca unit uses. I can?t think of a purpose to have a second solenoid?don?t know why they call that particular relay a Solenoid . The bendix engages by drag on a helical actuator. Purely mechanical in every starter I?ve ever seen. > > >> >> Your?re right ? what I meant to say was that I shorted from the terminal with the incoming heavy lead to the small terminal that has the starter switch lead on it. That activates the solenoid rather than bypassing it, which likely simply spins the starter motor and doesn?t move the bendix. >> >> Duncan Charlton >> Elgin, Texas USA >> >> >> >>> >>> If you short across the big terminals you eliminate the integrated solenoid. >>> >>> I have seen people bypass the integrated solenoid and use an external one, but my experience with the gear reduction starters is that they fail in the connection to the field coil, and rarely anywhere else. >>>> >>>> Unless? >>>> >>>> We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. >>>> >>>> The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. >>>> >>>> Duncan Charlton >>>> Elgin, Texas USA >>>> >>>> >>>> >>>>> >>>>> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. >>>>> >>>>> >>>>>> >>>>>> Napa auto parts has a part number ST51. >>>>>> >>>>>> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >>>>>> >>>>>> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >>>>>> >>>>>> Good Luck, >>>>>> >>>>>> Paul >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> >>>>>>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>>>>>> >>>>>>> Tony Drews >>>>>>> >>>>>>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>>>>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>>>>>> >>>>>>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>>>>>> >>>>>>>> Curious, >>>>>>>> >>>>>>>> Bob T >>>>>>>> '64 Spit GT autocrosser >>>>>>>> >>>>>>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>>>>>> _______________________________________________ >>>>>>>> >>>>>>>> http://www.fot-racing.com >>>>>>>> >>>>>>>> Donate: http://www.team.net/donate.html >>>>>>>> Archive: http://www.team.net/archive >>>>>>>> Forums: http://www.team.net/forums >>>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>>>>>> _______________________________________________ >>>>>>> >>>>>>> http://www.fot-racing.com >>>>>>> >>>>>>> Donate: http://www.team.net/donate.html >>>>>>> Archive: http://www.team.net/archive >>>>>>> Forums: http://www.team.net/forums >>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> http://www.fot-racing.com >>>>>> >>>>>> Donate: http://www.team.net/donate.html >>>>>> Archive: http://www.team.net/archive >>>>>> Forums: http://www.team.net/forums >>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com >>>> _______________________________________________ >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>> >>>> >>> >> >> _______________________________________________ >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From charly at mitchelplumbing.com Sun Mar 26 11:52:10 2017 From: charly at mitchelplumbing.com (Charly) Date: Sun, 26 Mar 2017 12:52:10 -0500 Subject: [Fot] TR6Tyres Hey, looking for a set or 2 of racing tires. I've been using Hoosier Speedsters for quite a few years and wondering if there is something else available and as good or better. The Speedsters are 205/60R-15 and would need to stay to the same size. I've used the Hoosier Vintage TD in the past and don't really want to go in that direction. Oh and this is for my TR6. Charly Mitchel TR6 #44 -------------- next part -------------- A non-text attachment was scrubbed... Name: 1405097978716.jpg Type: image/jpeg Size: 29320 bytes Desc: not available URL: From tony at tonydrews.com Sun Mar 26 13:15:29 2017 From: tony at tonydrews.com (Tony Drews) Date: Sun, 26 Mar 2017 14:15:29 -0500 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> <0BB098FC-7596-4EDC-A3EC-074D9D779F80@gmail.com> <46759E19-09F3-4750-BFA1-5DE8D4FACE87@gmail.com> An HTML attachment was scrubbed... URL: From tony at tonydrews.com Sun Mar 26 13:17:46 2017 From: tony at tonydrews.com (Tony Drews) Date: Sun, 26 Mar 2017 14:17:46 -0500 Subject: [Fot] TR6Tyres References: <29925.1490550730@mitchelplumbing.com> If you can still get Yokohama A048's, they come in that size. I like them better than the Speedsters. I keep hearing they are going out of production and I keep buying them from Tire Rack. I loved the TD's back a number of years ago but they didn't love me back - wouldn't last 2 weekends. Regards, Tony Drews At 12:52 PM 3/26/2017, Charly via Fot wrote: >Hey, looking for a set or 2 of racing tires. I've been using >Hoosier Speedsters for quite a few years and wondering if there is >something else available and as good >or better. The Speedsters are 205/60R-15 and would need to stay to >the same size. I've used the Hoosier Vintage TD in the past and >don't really want to go in that >direction. >Oh and this is for my TR6. >Charly Mitchel >TR6 #44 > > >Content-Type: image/jpeg; > name="1405097978716.jpg"; >Content-Disposition: attachment; > filename="1405097978716.jpg"; > >_______________________________________________ >fot at autox.team.net > >http://www.fot-racing.com > >Donate: http://www.team.net/donate.html >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums >Unsubscribe/Manage: >http://autox.team.net/mailman/options/fot/tony at tonydrews.com From chasgee22 at gmail.com Sun Mar 26 14:01:05 2017 From: chasgee22 at gmail.com (Chuck Gee) Date: Sun, 26 Mar 2017 13:01:05 -0700 Subject: [Fot] Look who I found at Willow Springs The stories of his demise are greatly exaggerated! -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 35134 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From jhasty at mhc-law.com Sun Mar 26 16:15:57 2017 From: jhasty at mhc-law.com (John Hasty) Date: Sun, 26 Mar 2017 22:15:57 +0000 Subject: [Fot] TR6Tyres References: <29925.1490550730@mitchelplumbing.com> The Yokahamas are not legal under SVRA rules.... Which means VRG &VDCA Sent from my iPhone > On Mar 26, 2017, at 2:34 PM, "Charly via Fot" wrote: > > > > Hey, looking for a set or 2 of racing tires. I've been using Hoosier Speedsters for quite a few years and wondering if there is something else available and as good > or better. The Speedsters are 205/60R-15 and would need to stay to the same size. I've used the Hoosier Vintage TD in the past and don't really want to go in that > direction. > Oh and this is for my TR6. > Charly Mitchel > TR6 #44 > <1405097978716.jpg> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com > > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. From TR3driver at ca.rr.com Sun Mar 26 17:37:02 2017 From: TR3driver at ca.rr.com (Randall) Date: Sun, 26 Mar 2017 16:37:02 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> <0BB098FC-7596-4EDC-A3EC-074D9D779F80@gmail.com> <46759E19-09F3-4750-BFA1-5DE8D4FACE87@gmail.com> <20170326191533.69791362BAA@relay.mailchannels.net> > I've seen the starter type that Duncan is referring to. The high torque > starters sold for the TR's work as Bill describes Sorry, but I disagree. I'm fairly intimate with that area, as I've had trouble with it and I have several of those starters. The Denso design, lightweight gear drive starters commonly sold as aftermarket replacements for TR2-8 and Stag all have a rod on the base of the solenoid plunger, which reaches through the housing and pushes the drive gear out before the contacts make contact. I couldn't find a good diagram just now, but you can see the pin here https://goo.gl/EYZjWG There is a bearing ball down there, because the gear turns but the solenoid plunger does not. I discovered the hard way that if you leave out the ball (must've fallen out at some point and got overlooked), the gear doesn't extend far enough and may or may not engage with the ring gear. Started out working about 99% of the time, but as the rod wore (from riding against the gear), it got more and more unreliable until I had to investigate. The Lucas starters don't work as Bill described either. The earlier ones with the inertia (aka Bendix) drive don't have integral solenoids at all. The later ones with the integral solenoid use the solenoid to engage the gears. Here's a diagram from the TR6 workshop manual. That offset pin on the left is actually used to adjust how far the gear extends (although later starters dropped the adjustment feature). The round housing behind the pinion is just a roller clutch (so the starter motor cannot be overdriven when the engine starts), it doesn't move the gear. That integral solenoid draws a healthy wallop of current at first, which was my main reason for keeping a secondary solenoid (or relay if you prefer). It's much better able to handle the 20 or 30 amps than the puny contacts in the starter switch. Plus, I like having the original starter button under the hood, so I can crank the motor from there. For many pre-computer Mopar products, it also allows the use of a safety interlock switch that returns to ground. -- Randall 56 TR3 TS13571L daily driver 71 Stag LE1473 - awaiting engine rebuild 71-2-3 Stag - awaiting gearbox rebuild -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 31023 bytes Desc: not available URL: From ponobill at gmail.com Mon Mar 27 15:55:57 2017 From: ponobill at gmail.com (Bill Babcock) Date: Mon, 27 Mar 2017 14:55:57 -0700 Subject: [Fot] Starter Solenoid References: <15b06def0f3-1f72-2297e@webprd-a40.mail.aol.com> <20170325195257.8E81E123D57@relay.mailchannels.net> <34ACD167-5D75-4CB9-8612-AE501FCE3F46@att.net> <14547C63-5BCA-43C9-9ACC-94F3790F2F9F@ponostyle.com> <6E05C176-9F6C-445E-88DC-6F882DF0DEF1@gmail.com> <79B378A3-31F8-4E86-B041-E5F0F12562BB@gmail.com> <0BB098FC-7596-4EDC-A3EC-074D9D779F80@gmail.com> <46759E19-09F3-4750-BFA1-5DE8D4FACE87@gmail.com> Yes, I was wrong, or more accurately?remembered incorrectly. The integral solenoid in the geared japanese starters most folks are using does indeed push the bendix part way into engagement and then the helical drag gear does the rest as the motor starts spinning. It is a high current relay though, and it should be all the relay necessary?you can operate these kind of starters with just a pushbutton. An additional relay might be desireable if you wanted the starter button to last a long time, but it?s just one more thing that could fail in a race car. If you bypass the integral solenoid and power the starter with an external solenoid the start will still work, the helical drag gear will still pull the gear into engagement with the flywheel, but I suspect the engagement would do more damage to the gears than necessary. With the internal solenoid pushing the gear into partial engagement before the contactors close and the motor spins up there is less grinding. I?ve seen people use an external solenoid by jumpering the small starter lead to the power lead. The external solenoid then applies power to both the main and the integral solenoid. The starter motor still doesn?t get powered until the bendix is partly engaged. The original Lucas starters have no such pre-engagement device. The bendix engages with the gear spinning, which is why the leading edge of the flywheel gear gets so chewed. > On Mar 26, 2017, at 7:40 AM, Duncan Charlton wrote: > > Oh, I see ? you?re referring to an ?inertia? starter motor. > > The "integral? solenoid I?m referring to is the type that?s mounted to a pre-engaged starter motor, thus ?integrated? with the starter motor unit, ie: built-in. The ones I?ve disassembled had a piston inside that was moved by an electromagnet when the lead from the ignition switch provides 12V, and the piston simultaneously moves a linkage that shifts the bendix gear into position against the ring gear while closing the circuit on the two heavy contacts connecting the battery with the electric motor, causing it to spin. > > Duncan Charlton > Elgin, Texas USA > > > >> >> Ah, you?re thinking that the integrated solenoid makes the starter gear engage. no, it?s just a high-current relay?functionally identical to the separate solenoid the old Luca unit uses. I can?t think of a purpose to have a second solenoid?don?t know why they call that particular relay a Solenoid . The bendix engages by drag on a helical actuator. Purely mechanical in every starter I?ve ever seen. >> >> >>> >>> Your?re right ? what I meant to say was that I shorted from the terminal with the incoming heavy lead to the small terminal that has the starter switch lead on it. That activates the solenoid rather than bypassing it, which likely simply spins the starter motor and doesn?t move the bendix. >>> >>> Duncan Charlton >>> Elgin, Texas USA >>> >>> >>> >>>> >>>> If you short across the big terminals you eliminate the integrated solenoid. >>>> >>>> I have seen people bypass the integrated solenoid and use an external one, but my experience with the gear reduction starters is that they fail in the connection to the field coil, and rarely anywhere else. >>>>> >>>>> Unless? >>>>> >>>>> We?ve had two cars that had starting problems that were cured by using a second solenoid. The actual problem with both was most likely due to a voltage loss between the battery, the ignition switch and the starter solenoid. >>>>> >>>>> The Ford solenoid requires very low voltage (something like 2 volts) to engage, whereas the one on my (German) Opel 1900 and the one on the 1978 Datsun 280Z clearly required a lot more. I could short across the big terminals to get the car to start, so I knew the starter motor and the integrated solenoid were both good. >>>>> >>>>> Duncan Charlton >>>>> Elgin, Texas USA >>>>> >>>>> >>>>> >>>>>> >>>>>> Are you guys not using the gear reduction starters? The built in solenoid in the starters is a very reliable part. If you?re using a solenoid to activate the solenoid, I think you have one too many. >>>>>> >>>>>> >>>>>>> >>>>>>> Napa auto parts has a part number ST51. >>>>>>> >>>>>>> We went with as an emergency repair to replace a broken Lucas at the track on a Sunday. They were the only ones in the town open that had anything. The counter person spent an hour researching what they had that would work. It works. Very reliable. >>>>>>> >>>>>>> I think its actually for 60's era Ford trucks. The Tr4 does not seem to mind or be insulted by it any way. >>>>>>> >>>>>>> Good Luck, >>>>>>> >>>>>>> Paul >>>>>>> >>>>>>> Sent from my iPhone >>>>>>> >>>>>>> >>>>>>>> I replaced my Lucas unit (with button) with one from the local Farm and Fleet. Has been dead reliable for 15 years. >>>>>>>> >>>>>>>> Tony Drews >>>>>>>> >>>>>>>> At 02:08 PM 3/25/2017, Bob Totten via Fot wrote: >>>>>>>>> Group wisdom on Starter Solenoids for our Triumph's ? >>>>>>>>> >>>>>>>>> Who sells the better quality Lucas (?) units as my starting problem has pointed to the solenoid is not functioning properly. Would also be interested in learning about any alternative brand that would be better in the long run. In 20 years of running my Spit my 5th unit is on the fritz or is that the life span for these things? >>>>>>>>> >>>>>>>>> Curious, >>>>>>>>> >>>>>>>>> Bob T >>>>>>>>> '64 Spit GT autocrosser >>>>>>>>> >>>>>>>>> PS I have inspected and tested the starter, and had it tested at the local Advance Auto Parts and it functions just fine(?). >>>>>>>>> _______________________________________________ >>>>>>>>> >>>>>>>>> http://www.fot-racing.com >>>>>>>>> >>>>>>>>> Donate: http://www.team.net/donate.html >>>>>>>>> Archive: http://www.team.net/archive >>>>>>>>> Forums: http://www.team.net/forums >>>>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at tonydrews.com >>>>>>>> _______________________________________________ >>>>>>>> >>>>>>>> http://www.fot-racing.com >>>>>>>> >>>>>>>> Donate: http://www.team.net/donate.html >>>>>>>> Archive: http://www.team.net/archive >>>>>>>> Forums: http://www.team.net/forums >>>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at att.net >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>>> >>>>>>> http://www.fot-racing.com >>>>>>> >>>>>>> Donate: http://www.team.net/donate.html >>>>>>> Archive: http://www.team.net/archive >>>>>>> Forums: http://www.team.net/forums >>>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> http://www.fot-racing.com >>>>>> >>>>>> Donate: http://www.team.net/donate.html >>>>>> Archive: http://www.team.net/archive >>>>>> Forums: http://www.team.net/forums >>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com >>>>> _______________________________________________ >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill at ponostyle.com >>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tr3a58 at verizon.net Mon Mar 27 16:03:58 2017 From: tr3a58 at verizon.net (Dean Tetterton) Date: Mon, 27 Mar 2017 18:03:58 -0400 Subject: [Fot] Hoosier Speedster I just found out from Bob Woodman Tire the Hoosier Dealer that the Speedster have a new compound and construction, They should be sticker, faster, and last longer. I have a set being delivered to VIR to break end for the run at The Kastner Cup. Is is possible for a tire to do all of the above. Any body tried the new compound yet? Dean From jhasty at mhc-law.com Mon Mar 27 17:02:36 2017 From: jhasty at mhc-law.com (John Hasty) Date: Mon, 27 Mar 2017 23:02:36 +0000 Subject: [Fot] Hoosier Speedster References: Yes, I had set for Sebring.... They were great.... Every bit as good as Yokahamas & Toyo R888... Stayed the same throughout each session & were as good for the last race as they were for the first session. Can't tell about how long they last.... Maybe after VIR more on that Sent from my iPhone > On Mar 27, 2017, at 6:56 PM, "Dean Tetterton via Fot" wrote: > > I just found out from Bob Woodman Tire the Hoosier Dealer that the Speedster > have a new compound and construction, They should be sticker, faster, and > last longer. I have a set being delivered to VIR to break end for the run at > The Kastner Cup. Is is possible for a tire to do all of the above. Any body > tried the new compound yet? > > Dean > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com > > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. From riverside at southslope.net Mon Mar 27 19:57:47 2017 From: riverside at southslope.net (riverside at southslope.net) Date: Mon, 27 Mar 2017 20:57:47 -0500 Subject: [Fot] road springs References: <2CB9D178-3441-4A02-AA3B-C891F7C27660@gmail.com> Coil Spring Specialties 632 W Bertrand St. Mary's,Kansas 66536 913 437 2025 -----Original Message----- From: Duncan Charlton via Fot Sent: Saturday, March 25, 2017 9:32 AM To: FOT Subject: [Fot] road springs Any recommendations for suppliers of custom made coil suspension springs in the US? Duncan Charlton Elgin, Texas USA _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive http://autox.team.net/mailman/options/fot/riverside at southslope.net ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7639 / Virus Database: 4767/14179 - Release Date: 03/24/17 From jhasty at mhc-law.com Mon Mar 27 20:17:31 2017 From: jhasty at mhc-law.com (John Hasty) Date: Tue, 28 Mar 2017 02:17:31 +0000 Subject: [Fot] road springs References: <2CB9D178-3441-4A02-AA3B-C891F7C27660@gmail.com>, NASCAR places in Moresville check web sites Sent from my iPhone > On Mar 27, 2017, at 10:05 PM, "riverside--- via Fot" wrote: > > Coil Spring Specialties > 632 W Bertrand > St. Mary's,Kansas > 66536 > 913 437 2025 > > > -----Original Message----- From: Duncan Charlton via Fot > Sent: Saturday, March 25, 2017 9:32 AM > To: FOT > Subject: [Fot] road springs > > Any recommendations for suppliers of custom made coil suspension springs in the US? > > Duncan Charlton > Elgin, Texas USA > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/riverside at southslope.net > > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2016.0.7639 / Virus Database: 4767/14179 - Release Date: 03/24/17 > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com > > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. From apage at prosystembrakes.com Mon Mar 27 21:49:26 2017 From: apage at prosystembrakes.com (Ashley Page) Date: Mon, 27 Mar 2017 23:49:26 -0400 Subject: [Fot] road springs References: <2CB9D178-3441-4A02-AA3B-C891F7C27660@gmail.com> <6FB23B0D-4C27-47E9-ADA8-BC83C80D3424@mhc-law.com> Name I was trying to remember: Mathew Warren Spring in Logansport IN They have been in the business for a long time and make the Hyperco springs among others. Sent from my iPhone > On Mar 27, 2017, at 10:17 PM, John Hasty via Fot wrote: > > NASCAR places in Moresville check web sites > > Sent from my iPhone > >> On Mar 27, 2017, at 10:05 PM, "riverside--- via Fot" wrote: >> >> Coil Spring Specialties >> 632 W Bertrand >> St. Mary's,Kansas >> 66536 >> 913 437 2025 >> >> >> -----Original Message----- From: Duncan Charlton via Fot >> Sent: Saturday, March 25, 2017 9:32 AM >> To: FOT >> Subject: [Fot] road springs >> >> Any recommendations for suppliers of custom made coil suspension springs in the US? >> >> Duncan Charlton >> Elgin, Texas USA >> >> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/riverside at southslope.net >> >> >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2016.0.7639 / Virus Database: 4767/14179 - Release Date: 03/24/17 >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >> >> > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/apage at prosystembrakes.com > > From duncan.charlton54 at gmail.com Tue Mar 28 05:51:59 2017 From: duncan.charlton54 at gmail.com (Duncan Charlton) Date: Tue, 28 Mar 2017 06:51:59 -0500 Subject: [Fot] road springs References: <2CB9D178-3441-4A02-AA3B-C891F7C27660@gmail.com> <6FB23B0D-4C27-47E9-ADA8-BC83C80D3424@mhc-law.com> Thanks to all who sent suggestions ? I have now found a company who can produce the sizes I need. Duncan Charlton Elgin, Texas USA > On Mar 27, 2017, at 9:17 PM, John Hasty wrote: > > NASCAR places in Moresville check web sites Coil Spring Specialties 632 W Bertrand St. Mary's,Kansas 66536 913 437 2025 > > Sent from my iPhone > >> On Mar 27, 2017, at 10:05 PM, "riverside--- via Fot" wrote: >> >> Coil Spring Specialties >> 632 W Bertrand >> St. Mary's,Kansas >> 66536 >> 913 437 2025 >> >> >> -----Original Message----- From: Duncan Charlton via Fot >> Sent: Saturday, March 25, 2017 9:32 AM >> To: FOT >> Subject: [Fot] road springs >> >> Any recommendations for suppliers of custom made coil suspension springs in the US? >> >> Duncan Charlton >> Elgin, Texas USA >> >> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/riverside at southslope.net >> >> >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2016.0.7639 / Virus Database: 4767/14179 - Release Date: 03/24/17 >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >> >> > CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a law firm on a legal matter. It may contain information that is confidential, privileged, proprietary, or otherwise legally exempt from disclosure. If you are not the intended recipient, you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this message, any part of it, or any attachments. If you have received this message in error, please delete this message and any attachments from your system without reading the content and notify the sender immediately of the inadvertent transmission. There is no intent on the part of the sender to waive any privilege, including the attorney-client privilege, that may attach to this communication. Thank you for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency. We help people file for bankruptcy relief under the federal Bankruptcy Code. > From billdentin at aol.com Tue Mar 28 09:37:50 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Tue, 28 Mar 2017 11:37:50 -0400 Subject: [Fot] Lime Rock Amici... I received an email from Lime Rock this morning, which was a poster-type advert for their 2017 schedule. There's a picture of an early, lipstick red, TR3 leading a pack of vintage production based cars. Not sure who it is, but my guess would perhaps be old friend Dave Spiwak (?). Considering all of the photos they might have used, it is nice they chose vintage, and in particular our race group. Having just spent the weekend watching SVRA/VARA race at Willow Springs International in California, I had to remember there's probably still two feet of snow at Lime Rock. But they are thinking about racing. Bill Dentinger -------------- next part -------------- An HTML attachment was scrubbed... URL: From dlhogye at comcast.net Tue Mar 28 11:34:03 2017 From: dlhogye at comcast.net (Dave) Date: Tue, 28 Mar 2017 10:34:03 -0700 Subject: [Fot] Fwd: Lime Rock Park's 2017 Major Events References: <1127549967688.1102444951134.1725086925.0.171003JL.2002@scheduler.constantcontact.com> Hooray for Triumphs! Sent from my iPad Begin forwarded message: > From: Vintage Motorsport > Date: March 28, 2017 at 7:05:06 AM PDT > To: dlhogye at comcast.net > Subject: Lime Rock Park's 2017 Major Events > Reply-To: info at vintagemotorsport.com > > > > Having trouble viewing this email? Click here > > > Hi, just a reminder that you're receiving this email because you have expressed an interest in Vintage Motorsport. Don't forget to add info at vintagemotorsport.com to your address book so we'll be sure to land in your inbox! > > > > Advertisement > > http://limerock.com/ > > > > Vintage Motorsport, 8712 E. Via De Commercio, Scottsdale, AZ 85258 > Forward this email | About our service provider > Sent by info at vintagemotorsport.com in collaboration with > > Try it free today -------------- next part -------------- An HTML attachment was scrubbed... URL: From robertlangtr6 at yahoo.com Tue Mar 28 15:12:14 2017 From: robertlangtr6 at yahoo.com (Robert Lang) Date: Tue, 28 Mar 2017 21:12:14 +0000 (UTC) Subject: [Fot] Triumph TR pinion height References: <189183621.5810668.1490735534266.ref@mail.yahoo.com> Hi, Absent the official tool for setting the pinion height, is there an actual number published any where? Else, is there a tool that you can buy that can be adapted to set up TR diffs? I set up a 3.70 last year and I might have set the pinion head too high... I'm actually not sure if that's the case, I threw in a user R&P - it might have been worn before. Not sure. But I have a couple of new gears sets that I want to get right and I don't really feel like installing / measuring / removing / shimming ad nauseam to get the pattern perfect. I also don't want to muck up the new gears. ;-) Regards,Bob Lang339-927-4489 -------------- next part -------------- An HTML attachment was scrubbed... URL: From dmar823 at gmail.com Tue Mar 28 18:20:09 2017 From: dmar823 at gmail.com (Don Marshall) Date: Tue, 28 Mar 2017 20:20:09 -0400 Subject: [Fot] Mark re: new member to be added Bryan Brazelton was nominated and seconded a week or so ago, but has not gotten any FOT emails yet. Mark, can you check and make sure he's been added to the list? His email is bbtr250 at gmail.com Thanks, Don -------------- next part -------------- An HTML attachment was scrubbed... URL: From johnstydo at gmail.com Tue Mar 28 19:17:25 2017 From: johnstydo at gmail.com (John Styduhar) Date: Tue, 28 Mar 2017 21:17:25 -0400 Subject: [Fot] Triumph TR pinion height References: <189183621.5810668.1490735534266.ref@mail.yahoo.com> <189183621.5810668.1490735534266@mail.yahoo.com> See if you can find and download the document "Six Tech" by Leonard Runkenberger. Contains a chapter on rear end setup for TR6 including info on pinion depth. I can email you the pdf otherwise. On Tue, Mar 28, 2017 at 5:12 PM, Robert Lang via Fot wrote: > Hi, > > Absent the official tool for setting the pinion height, is there an actual > number published any where? > > Else, is there a tool that you can buy that can be adapted to set up TR > diffs? > > I set up a 3.70 last year and I might have set the pinion head too high... > I'm actually not sure if that's the case, I threw in a user R&P - it might > have been worn before. Not sure. > > But I have a couple of new gears sets that I want to get right and I don't > really feel like installing / measuring / removing / shimming ad nauseam to > get the pattern perfect. I also don't want to muck up the new gears. ;-) > > Regards, > Bob Lang > 339-927-4489 <(339)%20927-4489> > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/johnstydo at gmail.com > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From chasgee22 at gmail.com Tue Mar 28 19:28:33 2017 From: chasgee22 at gmail.com (chasgee22 at gmail.com) Date: Tue, 28 Mar 2017 21:28:33 -0400 Subject: [Fot] Lime Rock References: <15b1590e865-6a97-25ea6@webprd-m23.mail.aol.com> It was great to see you this weekend Bill. I appreciate the lap times you took for me. Chuck > On Mar 28, 2017, at 11:37 AM, Bill Dentinger via Fot wrote: > > Amici... > > I received an email from Lime Rock this morning, which was a poster-type advert for their 2017 schedule. There's a picture of an early, lipstick red, TR3 leading a pack of vintage production based cars. Not sure who it is, but my guess would perhaps be old friend Dave Spiwak (?). Considering all of the photos they might have used, it is nice they chose vintage, and in particular our race group. > > Having just spent the weekend watching SVRA/VARA race at Willow Springs International in California, I had to remember there's probably still two feet of snow at Lime Rock. But they are thinking about racing. > > Bill Dentinger > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chasgee22 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From johnstydo at gmail.com Wed Mar 29 09:20:25 2017 From: johnstydo at gmail.com (John Styduhar) Date: Wed, 29 Mar 2017 11:20:25 -0400 Subject: [Fot] Triumph TR pinion height References: <189183621.5810668.1490735534266.ref@mail.yahoo.com> <189183621.5810668.1490735534266@mail.yahoo.com> <923413666.6426318.1490795806078@mail.yahoo.com> There is usually some scribe marking on the head of the pinion (in addition to the gear set number) that I was told indicates the + or - shimming from the "master" pinion depth. I think someone from Greasy Hands Garage might know for sure. I have also seen letter designations on the pinion head on a 4:11 gear set. On Wed, Mar 29, 2017 at 9:56 AM, barry rosenberg wrote: > Without the proper TR tool, setting correct pinion depth is a guess. The > tool has a part that substitutes for the pinion gear and you have to > measure to the top of it. From this measurement, you get the thickness of > shims needed. It is a very precise tool and I let no one use my set, sorry. > Not knowing where you live where you live, I would find a shop that has the > tool and let them set your pinion for you. > > Barry Rosenberg > > > On Wednesday, March 29, 2017 12:59 AM, John Styduhar via Fot < > fot at autox.team.net> wrote: > > > See if you can find and download the document "Six Tech" by Leonard > Runkenberger. Contains a chapter on rear end setup for TR6 including info > on pinion depth. I can email you the pdf otherwise. > > On Tue, Mar 28, 2017 at 5:12 PM, Robert Lang via Fot > wrote: > > Hi, > > Absent the official tool for setting the pinion height, is there an actual > number published any where? > > Else, is there a tool that you can buy that can be adapted to set up TR > diffs? > > I set up a 3.70 last year and I might have set the pinion head too high... > I'm actually not sure if that's the case, I threw in a user R&P - it might > have been worn before. Not sure. > > But I have a couple of new gears sets that I want to get right and I don't > really feel like installing / measuring / removing / shimming ad nauseam to > get the pattern perfect. I also don't want to muck up the new gears. ;-) > > Regards, > Bob Lang > 339-927-4489 > > > ______________________________ _________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate. html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/fot/johnstydo at gmail. com > > > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/britcars@ > bellsouth.net > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmccjr at aol.com Wed Mar 29 11:17:42 2017 From: fmccjr at aol.com (fmccjr at aol.com) Date: Wed, 29 Mar 2017 13:17:42 -0400 Subject: [Fot] Lime Rock References: <15b1590e865-6a97-25ea6@webprd-m23.mail.aol.com> <326F3046-0862-4614-962C-5C74A21FF53C@gmail.com> That is my car, and its about to be passed by all those behind; first practice session, Lime rock historics last September... I'm sure they wondered why I was so slow! Somehow, I broke the two rear rocker studs, but got ARP replacements from Larry Eckler of Morgan Spares, pushrods, etc from a track vendor, and was back on the pavement the next day (I was in group 9, so there was time). I had a blast, and cannot wait to do it again. The snow is almost gone here in the Hudson Valley. (Huzzah!) See you all at "The Cup". Rick McCurdy Newburgh, NY > On Mar 28, 2017, at 9:28 PM, Chuck Gee via Fot wrote: > > It was great to see you this weekend Bill. I appreciate the lap times you took for me. > > Chuck > >> On Mar 28, 2017, at 11:37 AM, Bill Dentinger via Fot wrote: >> >> Amici... >> >> I received an email from Lime Rock this morning, which was a poster-type advert for their 2017 schedule. There's a picture of an early, lipstick red, TR3 leading a pack of vintage production based cars. Not sure who it is, but my guess would perhaps be old friend Dave Spiwak (?). Considering all of the photos they might have used, it is nice they chose vintage, and in particular our race group. >> >> Having just spent the weekend watching SVRA/VARA race at Willow Springs International in California, I had to remember there's probably still two feet of snow at Lime Rock. But they are thinking about racing. >> >> Bill Dentinger >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/chasgee22 at gmail.com >> >> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fmccjr at aol.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Wed Mar 29 14:10:12 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Wed, 29 Mar 2017 16:10:12 -0400 Subject: [Fot] Victory Lane, April 2017 Amici... For those of you who are subscribers to Victory Lane, the April 2017 issue arrive in my mail yesterday afternoon. Page 3 (first page inside facing the front cover) has VSCDA's advertisement for the Blackhawk Vintage Classic, which this year features the 15th running of the Kastner Cup Triumph Race. Those familiar with Blackhawk Farms Raceway will recognize its iconic front straight dairy farm silo in the background. The two TRs pictured are a Frog Blue early TR3 and a dark blue TR4 running side by side. The former is 'Ole Blue'. my old car. The latter is Bob Wismer's TR4. Both cars are scheduled to enter the 15th Kastner Cup, and are now owned and driven by Henry Frye and Paul Ricco, respectively. Brian Garcia did early artwork on this ad/poster, which originally was to feature three 'Beady Eye' TRs, but we had difficultly locating a 3/4 front photo of Don Brick's white TR4. But not to worry. Don's car is also scheduled to be entered in the event. It is currently owned and raced by Ken Suhre. Bill Dentinger PS FOT members who ran VARA's Duel in the Desert Spring Mountain event last month at Pahrump, Nevada will be very pleased to see great coverage of the event starting on page 24. I hope Ken Knight is a subscriber, because there's a fantastic two page wide picture of him chasing down a Bobsy Sports Racer on his way to a First Overall win. A good portion of the rest of the five page article deals with the incredible ducky wet weather experienced that weekend on Friday and Saturday. How extra-ordinary. How often does one experience fifteen foot high Rooster Tails spraying from the open wheel cars when one is 'Dueling in the Desert'. Extra-ordinary indeed. -------------- next part -------------- An HTML attachment was scrubbed... URL: From bschirano at yahoo.com Wed Mar 29 20:15:56 2017 From: bschirano at yahoo.com (Brian Schirano) Date: Thu, 30 Mar 2017 02:15:56 +0000 (UTC) Subject: [Fot] GT6 Triple Weber intake? References: <1212055471.34753.1490840156883.ref@mail.yahoo.com> Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advanceBrian??26A GT6+, 28 TR6Brian Schirano 585-305-0349 Cell? BSchirano at yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From macdonaldp at rogers.com Wed Mar 29 20:53:00 2017 From: macdonaldp at rogers.com (Paul MacDonald) Date: Wed, 29 Mar 2017 22:53:00 -0400 Subject: [Fot] Race TR3 http://www.ebay.com/itm/1959-Triumph-TR3-TR3-/322463351047?hash=item4b145041 07:g:iFMAAOSwXYtYzY0C &vxp=mtr -------------- next part -------------- An HTML attachment was scrubbed... URL: From spitfire_racing at twcny.rr.com Thu Mar 30 01:52:11 2017 From: spitfire_racing at twcny.rr.com (Spitfire Racing) Date: Thu, 30 Mar 2017 03:52:11 -0400 Subject: [Fot] GT6 Triple Weber intake? References: <1212055471.34753.1490840156883.ref@mail.yahoo.com> <1212055471.34753.1490840156883@mail.yahoo.com> Brian, he?s going to spend quite a bit on that setup, especially for a street car. Richard Good has a great triple manifold for using three Strombergs or three SU HS-6 carbs. I can send pictures of the triple SU setup and Bruce Stutzman has the triple Stromberg setup on his TR-6. If he?s after some eye candy under the hood, those will do it for way fewer dollars invested. Once he buys the Weber components then he also needs to buy assortments of jets and air correctors to tune them. Hopefully he realizes one doesn?t just bolt on Webers. To get reasonable benefit from them he also needs cam; compression; and some alteration to the distributor curve, not to mention headers and exhaust system. Then once he has all this extra horsepower paid for I do hope the rest of the drivetrain is up to the task. There?s also the new issue then of cooling due to the extra heat potential on the mods. If he?s committed to this modification he can contact: http://www.piercemanifolds.com/ I hope he understands what is ahead. This will put serious hurt on the bankbook. Russ Moore Spitfire #49 From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Brian Schirano via Fot Sent: Wednesday, March 29, 2017 10:16 PM To: FOT List Subject: [Fot] GT6 Triple Weber intake? Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advance Brian 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell BSchirano at yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From clw2000 at msn.com Thu Mar 30 05:43:27 2017 From: clw2000 at msn.com (Chuck WATSON) Date: Thu, 30 Mar 2017 11:43:27 +0000 Subject: [Fot] GT6 Triple Weber intake? References: <1212055471.34753.1490840156883.ref@mail.yahoo.com>, <1212055471.34753.1490840156883@mail.yahoo.com> I agree with all the other necessary mods, but if he is committed look at the Moss European website. They have them. Or did recently. Sent from Outlook Mobile. _____________________________ Sent: Wednesday, March 29, 2017 10:53 PM Subject: [Fot] GT6 Triple Weber intake? Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advance Brian 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From bschirano at yahoo.com Thu Mar 30 05:54:32 2017 From: bschirano at yahoo.com (Brian Schirano) Date: Thu, 30 Mar 2017 11:54:32 +0000 (UTC) Subject: [Fot] GT6 Triple Weber intake? References: <1212055471.34753.1490840156883.ref@mail.yahoo.com> <1212055471.34753.1490840156883@mail.yahoo.com> Thanks All on the triple weber info, I will pass it along, I told him it was way more? carbureation than he needs, we'll see if Russ deeper explanation put's him on another path Brian 26A GT6+, 28 TR6Brian Schirano 585-305-0349 Cell? BSchirano at yahoo.com From: Brian Schirano via Fot To: FOT List Sent: Wednesday, March 29, 2017 10:36 PM Subject: [Fot] GT6 Triple Weber intake? Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advanceBrian??26A GT6+, 28 TR6Brian Schirano 585-305-0349 Cell? BSchirano at yahoo.com_______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From sjanzen at me.com Thu Mar 30 05:41:33 2017 From: sjanzen at me.com (Scott Janzen) Date: Thu, 30 Mar 2017 07:41:33 -0400 Subject: [Fot] GT6 Triple Weber intake? References: <1212055471.34753.1490840156883.ref@mail.yahoo.com> <1212055471.34753.1490840156883@mail.yahoo.com> I agree with the others, though I have triple webers on my race car, it?s totally unnecessary for the street. On the race car, I can?t give it wide open throttle until over 4,000 rpm. They do look pretty though! I have probably two dozen Strombergs of various configurations, if your friend goes that route. Finally, on the triple webers, my stepped manifolds were made by Triumphtune. I got them from Scott Harper at Team Triumph - he may have a set, or my guess is you could try Canley Classics. On Mar 29, 2017, at 10:15 PM, Brian Schirano via Fot wrote: Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advance Brian 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell BSchirano at yahoo.com _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From gt6steve at aol.com Thu Mar 30 06:55:02 2017 From: gt6steve at aol.com (gt6steve at aol.com) Date: Thu, 30 Mar 2017 08:55:02 -0400 Subject: [Fot] GT6 Triple Weber intake? Brian, I have a set of original Triumphtune manifolds and three carbs I could sell him. Unfortunately I won't be home again until next weekend. I'd ask a Grand for the setup. Steve -----Original Message----- From: Chuck WATSON via Fot To: Brian Schirano ; FOT List Sent: Thu, Mar 30, 2017 5:08 am Subject: Re: [Fot] GT6 Triple Weber intake? I agree with all the other necessary mods, but if he is committed look at the Moss European website. They have them. Or did recently. Sent from Outlook Mobile. _____________________________ From: Brian Schirano via Fot Sent: Wednesday, March 29, 2017 10:53 PM Subject: [Fot] GT6 Triple Weber intake? To: FOT List Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advance Brian 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell BSchirano at yahoo.com _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From billdentin at aol.com Thu Mar 30 09:39:54 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Thu, 30 Mar 2017 11:39:54 -0400 Subject: [Fot] Race TR3 References: <002401d2a900$bf356f50$3da04df0$@rogers.com> Amici... John Fridirici's TR3A. He has/had a gorgeous, real Shelby Mustang he raced as well. Bill Dentinger -----Original Message----- From: Paul MacDonald via Fot To: Fot Sent: Wed, Mar 29, 2017 11:47 pm Subject: [Fot] Race TR3 http://www.ebay.com/itm/1959-Triumph-TR3-TR3-/322463351047?hash=item4b14504107:g:iFMAAOSwXYtYzY0C&vxp=mtr _______________________________________________ fot at autox.team.net http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From steve at artwithcars.com Thu Mar 30 11:30:41 2017 From: steve at artwithcars.com (Steven Belfer) Date: Thu, 30 Mar 2017 10:30:41 -0700 Subject: [Fot] Race TR3 References: <002401d2a900$bf356f50$3da04df0$@rogers.com> <15b1fdf8659-76f3-1246@webprd-a84.mail.aol.com> Even the cylinder head is purple! ~Steve www.artwithcars.com www.stevebelfercreative.com > On Mar 30, 2017, at 8:39 AM, Bill Dentinger via Fot wrote: > > Amici... > > John Fridirici's TR3A. > > He has/had a gorgeous, real Shelby Mustang he raced as well. > > Bill Dentinger > > > -----Original Message----- > Sent: Wed, Mar 29, 2017 11:47 pm > Subject: [Fot] Race TR3 > > http://www.ebay.com/itm/1959-Triumph-TR3-TR3-/322463351047?hash=item4b14504107:g:iFMAAOSwXYtYzY0C&vxp=mtr > > > _______________________________________________ > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/billdentin at aol.com > > > _______________________________________________ > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/steve at artwithcars.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From horizonracing at msn.com Mon Mar 20 08:12:37 2017 From: horizonracing at msn.com (Tony and Annie Garmey) Date: Mon, 20 Mar 2017 14:12:37 +0000 Subject: [Fot] Midwest contingent May race? References: <13694787.9779.1489971200625@elwamui-karabash.atl.sa.earthlink.net>, <000601d2a167$902b5cb0$b0821610$@rr.com> Interesting thread . Too bad about the negative comments about SVRA. I'm based out of Seattle and attend races all over the country . I usually bring 2-4 cars to events . I have found SVRA to be the most professional group of any of the Vintage organizations. They have a published rule book . Anytime I've had a problem , it's because " I" have not read the rules. Pretty simple . Rick ( head of tech) and his staff has always been supportive and they want cars on track . The small and mid bore grids are important to Svra. Just my 2 cents ;) Sent from my iPhone > On Mar 20, 2017, at 4:13 AM, Spitfire Racing via Fot wrote: > > I feel the same way Mike. Those were great times due entirely to who we kept > company with but there is no chance I'll ever attend another $VRA event. > Even back then, they were more interested in the "big money" cars rather > than the production sports car folks, yet I recall Triumphs filling the > entire track for the parade laps. Mid-Ohio with their Nazi-like "security" > and $VRA with its attentions to the moneyed few, seem to have shot > themselves in the foot. Triumph guys have found other locations and groups > more friendly to run with. > > Russ Moore > > -----Original Message----- > From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Mike Jackson via > Fot > Sent: Sunday, March 19, 2017 8:53 PM > To: Paul Ricco; John Hasty > Cc: fot at autox.team.net > Subject: Re: [Fot] Midwest contingent May race? > > Last year we went to mid Ohio for the first time in nearly a decade, SVRA > had hired some local tech guys. Probably SCCA. They did not understand > vintage cars and there did not seem to be any mgmt guidance. After nearly > 30 min of arguing and further dismantling of my car to try and satisfy him, > I was about ready to load up and leave. Seriously. Just before I did so, > some one showed up, did not introduce himself but said I could go. I didn't > bother to ask for anyone to sign my logbook, just took my sticker and went > back to the good old Triumph tree in the grass paddock. I miss those days > with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd > of TRs that used to go. > > Mike Jackson > > -----Original Message----- >> From: Paul Ricco via Fot >> Sent: Mar 19, 2017 3:27 PM >> To: John Hasty >> Cc: "fot at autox.team.net" >> Subject: Re: [Fot] Midwest contingent May race? >> >> Tony, >> >> We used to really enjoy the Spring race at Road America and we are really > trying to have a good relationship with SVRA. Although the registerers and > admin staff at SVRA have been TERRIFIC to deal with, some other areas of the > staff have been far less than satisfactory. Tony is alway nice to us when > we see him. However, we have gotten the royal run around in another area by > SVRA. I am not a happy member at this time. We renewed are SVRA membership > for 1 more year and we are going to give SVRA RA event another run this > year. If we do not have a great experience (weather excluded, because they > do not control that), we will done with SVRA and the Spring event at RA > until another organization starts running the event. >> >> Paul >> >>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot > wrote: >>> >>> VRG Summit Point in May for us >>> >>> Sent from my iPhone >>> >>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" > wrote: >>>> >>>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, > awesome way to start the season). What are the other Midwest FOT looking > at? I wasn't impressed with SVRA's rendition of Road America last year > (that's my default May race). Tech was a pain, turnout was low, weather was > mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman > with VSCDA instead? Or other options? >>>> >>>> Thanks, Tony Drews >>>> >>>> vroom, vroom >>>> >>>> _______________________________________________ >>>> fot at autox.team.net >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: > http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >>>> >>>> >>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent > by a law firm on a legal matter. It may contain information that is > confidential, privileged, proprietary, or otherwise legally exempt from > disclosure. If you are not the intended recipient, you are hereby notified > that you are not authorized to read, print, retain, copy or disseminate this > message, any part of it, or any attachments. If you have received this > message in error, please delete this message and any attachments from your > system without reading the content and notify the sender immediately of the > inadvertent transmission. There is no intent on the part of the sender to > waive any privilege, including the attorney-client privilege, that may > attach to this communication. Thank you for your cooperation. 11 U.S.C. > 528(a)(4) NOTICE. We are a debt relief agency. We help people file for > bankruptcy relief under the federal Bankruptcy Code. >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: > http://autox.team.net/mailman/options/fot/paulricco at att.net >>> >>> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: > http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net >> >> > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: > http://autox.team.net/mailman/options/fot/spitfire_racing at twcny.rr.com > > > > _______________________________________________ > fot at autox.team.net > > http://www.fot-racing.com > > Donate: http://www.team.net/donate.html > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/horizonracing at msn.com > > From grandwazoo at earthlink.net Mon Mar 20 11:22:29 2017 From: grandwazoo at earthlink.net (Mike Jackson) Date: Mon, 20 Mar 2017 13:22:29 -0400 (GMT-04:00) Subject: [Fot] Midwest contingent May race? Rick is a very nice guy. I like him a lot. Before the end of the weekend at Mid-Ohio he even came to my spot in the grass paddock and apologized for the miserable way I was treated at Tech. I guess he wasnt there at the time but word of the shouting contest got around. Mike -----Original Message----- >From: Tony and Annie Garmey >Sent: Mar 20, 2017 10:12 AM >To: Spitfire Racing >Cc: Mike Jackson , Paul Ricco , John Hasty , "fot at autox.team.net" >Subject: Re: [Fot] Midwest contingent May race? > >Interesting thread . Too bad about the negative comments about SVRA. >I'm based out of Seattle and attend races all over the country . I usually bring 2-4 cars to events . >I have found SVRA to be the most professional group of any of the Vintage organizations. They have a published rule book . Anytime I've had a problem , it's because " I" have not read the rules. Pretty simple . Rick ( head of tech) and his staff has always been supportive and they want cars on track . The small and mid bore grids are important to Svra. > >Just my 2 cents ;) > >Sent from my iPhone > >> On Mar 20, 2017, at 4:13 AM, Spitfire Racing via Fot wrote: >> >> I feel the same way Mike. Those were great times due entirely to who we kept >> company with but there is no chance I'll ever attend another $VRA event. >> Even back then, they were more interested in the "big money" cars rather >> than the production sports car folks, yet I recall Triumphs filling the >> entire track for the parade laps. Mid-Ohio with their Nazi-like "security" >> and $VRA with its attentions to the moneyed few, seem to have shot >> themselves in the foot. Triumph guys have found other locations and groups >> more friendly to run with. >> >> Russ Moore >> >> -----Original Message----- >> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Mike Jackson via >> Fot >> Sent: Sunday, March 19, 2017 8:53 PM >> To: Paul Ricco; John Hasty >> Cc: fot at autox.team.net >> Subject: Re: [Fot] Midwest contingent May race? >> >> Last year we went to mid Ohio for the first time in nearly a decade, SVRA >> had hired some local tech guys. Probably SCCA. They did not understand >> vintage cars and there did not seem to be any mgmt guidance. After nearly >> 30 min of arguing and further dismantling of my car to try and satisfy him, >> I was about ready to load up and leave. Seriously. Just before I did so, >> some one showed up, did not introduce himself but said I could go. I didn't >> bother to ask for anyone to sign my logbook, just took my sticker and went >> back to the good old Triumph tree in the grass paddock. I miss those days >> with Dentinger, Wismer, Karen, Russ Moore and all the rest of the huge crowd >> of TRs that used to go. >> >> Mike Jackson >> >> -----Original Message----- >>> From: Paul Ricco via Fot >>> Sent: Mar 19, 2017 3:27 PM >>> To: John Hasty >>> Cc: "fot at autox.team.net" >>> Subject: Re: [Fot] Midwest contingent May race? >>> >>> Tony, >>> >>> We used to really enjoy the Spring race at Road America and we are really >> trying to have a good relationship with SVRA. Although the registerers and >> admin staff at SVRA have been TERRIFIC to deal with, some other areas of the >> staff have been far less than satisfactory. Tony is alway nice to us when >> we see him. However, we have gotten the royal run around in another area by >> SVRA. I am not a happy member at this time. We renewed are SVRA membership >> for 1 more year and we are going to give SVRA RA event another run this >> year. If we do not have a great experience (weather excluded, because they >> do not control that), we will done with SVRA and the Spring event at RA >> until another organization starts running the event. >>> >>> Paul >>> >>>> On Mar 19, 2017, at 9:48 AM, John Hasty via Fot >> wrote: >>>> >>>> VRG Summit Point in May for us >>>> >>>> Sent from my iPhone >>>> >>>>> On Mar 18, 2017, at 9:07 PM, "Tony Drews via Fot" >> wrote: >>>>> >>>>> I'm not sure what race to choose for May (doing VIR Wild Hare in April, >> awesome way to start the season). What are the other Midwest FOT looking >> at? I wasn't impressed with SVRA's rendition of Road America last year >> (that's my default May race). Tech was a pain, turnout was low, weather was >> mediocre (I know SVRA doesn't control THAT :) ). Who is doing Gingerman >> with VSCDA instead? Or other options? >>>>> >>>>> Thanks, Tony Drews >>>>> >>>>> vroom, vroom >>>>> >>>>> _______________________________________________ >>>>> fot at autox.team.net >>>>> >>>>> http://www.fot-racing.com >>>>> >>>>> Donate: http://www.team.net/donate.html >>>>> Archive: http://www.team.net/archive >>>>> Forums: http://www.team.net/forums >>>>> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/fot/jhasty at mhc-law.com >>>>> >>>>> >>>> CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent >> by a law firm on a legal matter. It may contain information that is >> confidential, privileged, proprietary, or otherwise legally exempt from >> disclosure. If you are not the intended recipient, you are hereby notified >> that you are not authorized to read, print, retain, copy or disseminate this >> message, any part of it, or any attachments. If you have received this >> message in error, please delete this message and any attachments from your >> system without reading the content and notify the sender immediately of the >> inadvertent transmission. There is no intent on the part of the sender to >> waive any privilege, including the attorney-client privilege, that may >> attach to this communication. Thank you for your cooperation. 11 U.S.C. >> 528(a)(4) NOTICE. We are a debt relief agency. We help people file for >> bankruptcy relief under the federal Bankruptcy Code. >>>> >>>> _______________________________________________ >>>> fot at autox.team.net >>>> >>>> http://www.fot-racing.com >>>> >>>> Donate: http://www.team.net/donate.html >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/fot/paulricco at att.net >>>> >>>> >>> >>> _______________________________________________ >>> fot at autox.team.net >>> >>> http://www.fot-racing.com >>> >>> Donate: http://www.team.net/donate.html >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/fot/grandwazoo at earthlink.net >>> >>> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/fot/spitfire_racing at twcny.rr.com >> >> >> >> _______________________________________________ >> fot at autox.team.net >> >> http://www.fot-racing.com >> >> Donate: http://www.team.net/donate.html >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/horizonracing at msn.com >> >> From billdentin at aol.com Fri Mar 31 10:15:08 2017 From: billdentin at aol.com (billdentin at aol.com) Date: Fri, 31 Mar 2017 12:15:08 -0400 Subject: [Fot] Midwest contingent May race? Hi Tony... Kudos to you! In particular, one sentence in your succinct paragraph is a bell ringer. That is, " Anytime I've had a problem , it's because "I" have not read the rules." That sir, is a mouthful, and deserves re-reading by all of us. Bill Dentinger -----Original Message----- From: Tony and Annie Garmey via Fot To: Spitfire Racing Cc: fot Sent: Fri, Mar 31, 2017 1:08 am Subject: Re: [Fot] Midwest contingent May race? Interesting thread . Too bad about the negative comments about SVRA. I'm based out of Seattle and attend races all over the country . I usually bring 2-4 cars to events . I have found SVRA to be the most professional group of any of the Vintage organizations. They have a published rule book . Anytime I've had a problem , it's because " I" have not read the rules. Pretty simple . Rick ( head of tech) and his staff has always been supportive and they want cars on track . The small and mid bore grids are important to Svra. Just my 2 cents ;) -------------- next part -------------- An HTML attachment was scrubbed... URL: From explore8 at outlook.com Fri Mar 31 11:19:41 2017 From: explore8 at outlook.com (D V) Date: Fri, 31 Mar 2017 17:19:41 +0000 Subject: [Fot] GT6 Triple Weber intake? References: , <15b1f4894ca-6a80-b1b@webprd-m95.mail.aol.com> I had a set of the stepped triumph tune manifolds but sold them recently. They are pretty pricey as I don't think they make them any more. I still have the set of sequential Spanish made webers and linkage. Sent from my iPhone Brian, I have a set of original Triumphtune manifolds and three carbs I could sell him. Unfortunately I won't be home again until next weekend. I'd ask a Grand for the setup. Steve -----Original Message----- Sent: Thu, Mar 30, 2017 5:08 am Subject: Re: [Fot] GT6 Triple Weber intake? I agree with all the other necessary mods, but if he is committed look at the Moss European website. They have them. Or did recently. Sent from Outlook Mobile. _____________________________ Sent: Wednesday, March 29, 2017 10:53 PM Subject: [Fot] GT6 Triple Weber intake? Hey Triumph friends I have an local racer who's son is building a GT6 (road car) and in search of a GT6 triple Weber intake, I suggested Richard Good and Kai at Wishbone, no luck. Any sourcing suggestions I can pass on to him? I don't run one myself. Thanks in advance Brian 26A GT6+, 28 TR6 Brian Schirano 585-305-0349 Cell _______________________________________________ http://www.fot-racing.com Archive: http://www.team.net/archive _______________________________________________ http://www.fot-racing.com Archive: http://www.team.net/archive -------------- next part -------------- An HTML attachment was scrubbed... URL: From charly at mitchelplumbing.com Fri Mar 31 12:40:24 2017 From: charly at mitchelplumbing.com (Charly Mitchel) Date: Fri, 31 Mar 2017 11:40:24 -0700 Subject: [Fot] TR6 Racecar An acquaintance of mine is looking for a TR6 racecar, preferably with some history (of racing) Does anyone have some leads as to where one might be? Thanks, Charly Mitchel TR6 #44 -------------- next part -------------- An HTML attachment was scrubbed... URL: From toodamnfunky at comcast.net Fri Mar 31 19:39:51 2017 From: toodamnfunky at comcast.net (Jim Gray) Date: Fri, 31 Mar 2017 19:39:51 -0600 Subject: [Fot] Trying to time a spitfire cam ..... Help! I'm trying to time a spitfire cam with no cam card. A local cam guy says it has 256 degrees duration at .050. Can anyone with a similar cam tell me How many degrees btdc the intake should open at .050 off the seat? Thanx as always for any help Jim g Sent from my iPhone From joeg at neb.rr.com Fri Mar 31 20:37:33 2017 From: joeg at neb.rr.com (Joe Guinan) Date: Fri, 31 Mar 2017 21:37:33 -0500 Subject: [Fot] Off Topic - Value of an MG TD? Sorry to hit the list with this off topic request, but is anyone on FOT able to assist me in helping a friend? He's found a 1952 MG-TD in "unrestored" and "almost but not quite running" condition and is having a hard time determining what a fair price would be. I have a few photos that I can forward - and we both realize that it is really impossible to judge a car by photos. We are trying to get a decent "ballpark" figure. From what I can find - prices for a well-restored car can hit $25,000 or so. Unrestored cars are hard to find, and the numerous replica versions available really make it difficult to put a finger on a price. Joe Guinan Fremont, Nebraska -------------- next part -------------- An HTML attachment was scrubbed... URL: From airtightproductions at icloud.com Wed Mar 1 10:21:25 2017 From: airtightproductions at icloud.com (Steven Kingsbury) Date: Wed, 01 Mar 2017 17:21:25 +0000 (GMT) Subject: [Healeys] LA Visit Ira, Not sure of the LBC stuff going on as I no longer live in that area, but if you like to look at cars, I suggest a trip to the Nethercutt Museum. http://www.nethercuttcollection.org/ It's free and amazing. Check them out online and if you can, make the appointment to take the guided tour, again, it's free. Also there is the Mullin Museum out in Oxnard. http://mullinautomotivemuseum.com/ It is totally French cars and there is an admission price, not sure what it is and there is also the Murphy Museum almost right next door. http://www.murphyautomuseum.org/ And then you can contact the Southern California Austin Healey club and see if there's anything going on there. http://www.austin-healey.org/ Good luck and have fun! Steven Kingsbury BN1 #598 On Feb 28, 2017, at 01:54 PM, i erbs wrote: I'm going to be in LA April 1-5 and was wondering if there is any LBC stuff going on? I want to visit the refurbished Petersen Museum, but what else? I'll be staying in the San Fernado Valley. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Wed Mar 1 10:50:23 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 1 Mar 2017 09:50:23 -0800 Subject: [Healeys] LA Visit References: <119c0c59-27f5-49d8-815b-28030e0ec5aa@me.com> I have been to the first two, but have not heard of the Murphy Museum. Looks like it's worth checking out. Thanks Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Wed, Mar 1, 2017 at 9:21 AM, Steven Kingsbury < airtightproductions at icloud.com> wrote: > Ira, > Not sure of the LBC stuff going on as I no longer live in that area, but > if you like to look at cars, I suggest a trip to the Nethercutt Museum. > http://www.nethercuttcollection.org/ It's free and amazing. Check them > out online and if you can, make the appointment to take the guided tour, > again, it's free. Also there is the Mullin Museum out in Oxnard. > http://mullinautomotivemuseum.com/ It is totally French cars and there > is an admission price, not sure what it is and there is also the Murphy > Museum almost right next door. http://www.murphyautomuseum.org/ > And then you can contact the Southern California Austin Healey club and > see if there's anything going on there. http://www.austin-healey.org/ > Good luck and have fun! > Steven Kingsbury > BN1 #598 > > On Feb 28, 2017, at 01:54 PM, i erbs wrote: > > I'm going to be in LA April 1-5 and was wondering if there is any LBC > stuff going on? I want to visit the refurbished Petersen Museum, but what > else? I'll be staying in the San Fernado Valley. > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ > airtightproductions at icloud.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydohdahman at gmail.com Wed Mar 1 22:07:05 2017 From: healeydohdahman at gmail.com (1 2) Date: Wed, 1 Mar 2017 22:07:05 -0700 Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjhco at att.net Thu Mar 2 07:26:06 2017 From: rjhco at att.net (Richard J. Hockert) Date: Thu, 2 Mar 2017 08:26:06 -0600 Subject: [Healeys] Engine Rebuild Modifications References: How much $$$$$ do you have to spend? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of 1 2 Sent: Wednesday, March 01, 2017 11:07 PM To: Ahealey help Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 2 08:22:01 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 2 Mar 2017 16:22:01 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 2, 2017 at 6:07 AM 1 2 wrote: > > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From al at bighealey.org Thu Mar 2 08:23:12 2017 From: al at bighealey.org (Al Fuller) Date: Thu, 2 Mar 2017 10:23:12 -0500 Subject: [Healeys] Engine Rebuild Modifications References: What are you trying to accomplish? More power? High reliability? Originality? Drivability? Other particular needs/wants? Al Fuller al at bighealey dot org '65 BJ-8 '85 Rx-7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of 1 2 Sent: Thursday, March 2, 2017 12:07 AM To: Ahealey help Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 2 09:56:51 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 2 Mar 2017 17:56:51 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> I should mention I've had Pertronix electronic 'points' in my BJ8 for years. Electronic/computer control and fuel injection--now, electronically controlled--are the two most significant improvements to the internal combustion engine. -------------------------------- Bob Spidell - San Jose, CA > On March 2, 2017 at 4:22 PM Bob Spidell wrote: > > > Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: > > > * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters > * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality > * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) > * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. > * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification > * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' > * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem > > I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > > > On March 2, 2017 at 6:07 AM 1 2 wrote: > > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From per at schoerner.se Thu Mar 2 11:19:36 2017 From: per at schoerner.se (Per Schoerner) Date: Thu, 2 Mar 2017 19:19:36 +0100 Subject: [Healeys] Engine Rebuild Modifications References: Sleeve the oil channels, especially the one that goes across the block and the one that goes up to the cylinder head. To avoid oil leaking into the water ways. Per Skickat fr?n min iPhone > 2 mars 2017 kl. 06:07 skrev 1 2 : > > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at schoerner.se > From healeybruce at roadrunner.com Thu Mar 2 16:06:56 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Thu, 2 Mar 2017 15:06:56 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> Good list, Bob. When completed, my engine will have the Denis Welch DWR1 cam, bucket tappets, hollow push rods, DW 85mm pistons, DW lightened flywheel and a diaphragm style 9.5? Jaguar clutch, along with the DW high capacity oil pump I already had installed. The floor of the water jacket has also been epoxied to seal any possible leaks from the oil gallery. My exhaust manifolds were previously Jet-Hot coated, but Jet-Hot has since been through bankruptcy and is not owned by another company, though still operating under that brand. With this rebuild, I am using a company called IA Coatings in Houston for ceramic coating of the exhaust and intake manifolds. The transmission has been rebuilt with DW 1st, reverse and cluster gears, synchros, with a new hardened DW gear lever. I also use modern K&N oil and air filters. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Thursday, March 02, 2017 7:22 AM To: Ahealey help ; 1 2 Subject: Re: [Healeys] Engine Rebuild Modifications Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. Bob -------------------------------- Bob Spidell - San Jose, CA Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From jc9821 at msn.com Thu Mar 2 17:37:46 2017 From: jc9821 at msn.com (John and Judy Carter) Date: Fri, 3 Mar 2017 00:37:46 +0000 Subject: [Healeys] Healeys Digest, Vol 10, Issue 63 References: Mark Schneider is out of town and may not be receiving emails. Sent from my iPhone > On Feb 24, 2017, at 1:05 PM, "healeys-request at autox.team.net" wrote: > > Send Healeys mailing list submissions to > healeys at autox.team.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://autox.team.net/mailman/listinfo/healeys > or, via email, send a message with subject or body 'help' to > healeys-request at autox.team.net > > You can reach the person managing the list at > healeys-owner at autox.team.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Healeys digest..." > > > Today's Topics: > > 1. Re: removing the 8-way flasher box (kerry) > 2. AH Club USA - membership renewal. Help? (Bluehealey) > 3. Re: AH Club USA - membership renewal. Help? (Bob Spidell) > 4. Re: AH Club USA - membership renewal. Help? (E.A. Driver) > 5. Re: AH Club USA - membership renewal. Help? (Jean Caron) > 6. Trans oil foaming (Roger Grace) > 7. Heat Shield Install (R. Lindsay) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 23 Feb 2017 20:40:47 -0800 > From: "kerry" > To: > Subject: Re: [Healeys] removing the 8-way flasher box > Message-ID: <008201d28e58$2c822a80$85867f80$@shaw.ca> > Content-Type: text/plain; charset="us-ascii" > > Thanks for the idea of going through the back to replace the flasherbox..I > had thought about backing the two top scews out from the wheel well access > just couldn't figure out how to get them back in after installing new box > .maybe staring at it for a couple more months will help..darn air hose ! > > > > Right now I only make left turnsJ > > > > Kerry > > BT7 > > Victoria BC > > > > From: Jean Caron [mailto:vintage_roadster_restoration at hotmail.com] > Sent: February 22, 2017 3:16 PM > To: Bob Spidell; healeys at autox.team.net > Subject: Re: [Healeys] removing the 8-way flasher box > > > > Bob, > > No these boxes are not sealed, they have three prongs, two at one end and > one at the other that hold the cover in place. As Bruce Steele, I had done > an article on these a while ago for Healey Marque, and I have done about a > dozen of these and they are still working well and the outside liiks > original. > > > > Jean > > > > _____ > > From: Healeys on behalf of Bob Spidell > > Sent: February 22, 2017 4:39 PM > To: healeys at autox.team.net > Subject: Re: [Healeys] removing the 8-way flasher box > > > > Are these boxes sealed? We got into ours from a BN2, and had to drill out a > couple spot welds. > > After installing a new harness, the turn indicators didn't function > properly. 'Assuming' the problem was in the relay box, we opened it up only > to find out later the harness had a couple wires mislabeled (wrong > color/trace). This really pissed me off as otherwise I had the harness > wired 100% correct (not to mention 'violating' an original flasher box). > > Bob > > > > On 2/22/2017 8:04 AM, i erbs wrote: > > I don't have my air hoses in place yet, so It is a straight shot to the top > nuts. My mechanic removed mine and cleaned and adjusted the internal points. > It gets rusty in there. So Simon, you might take a look inside once you get > it out and I would bet you will find rust and crud in there. Using a > multi-meter you should be able to check the contacts. > > > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Wed, Feb 22, 2017 at 7:21 AM, Bruce Steele > wrote: > > Simon, I've had mine out twice, most recently last weekend when I replaced > it while the engine is out for a rebuild (it was a lot easier to sit in the > engine bay than reach over!). Using a long thin flat blade screwdriver, > loosen the terminals one at a time. I was perhaps fortunate that my wires > are basically "trained" to lay in order so keeping them straight was not a > problem, but if in doubt label them first. Ira's right-seeing the color > codes can be tricky unless everything is really clean! Remove the bottom > screw last. Removing the top 2 screws is the problem as they are blocked by > the air trunking. If there is no way to get to them from the front, and > there probably isn't, you can drill them out through the captive nuts in the > wheel well. Yes, that ruins the nuts, but there is an easy solution to > that. Before reinstalling the relay unit, put 2 U-type spring clip speed > nuts on the flange over the outboard holes. Install the bottom machine > screw to finger tight to hold the unit in place, then use 2 sheet metal > screws through the drilled out nuts to secure the top. Or 1 screw-I'm > pretty sure 3 screws in that is overkill. You may have to move the unit > slightly side to side to line up the holes, but it will work fine and is > much easier than trying to go in from the front. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs > Sent: Tuesday, February 21, 2017 9:19 AM > To: Simon Lachlan > Cc: Pierre Henri Claret ; Healey List > > Subject: Re: [Healeys] removing the 8-way flasher box > > > > try using a 1/4 drive ratchet and extension with a knuckle in between the > extensions > > I would mark the wires in case the color coding is hard to read. > > > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Tue, Feb 21, 2017 at 7:30 AM, Simon Lachlan > wrote: > > My car is RHD so accessing that wretched thing is easy enough by Healey > standards. Nothing much above it. However it seems that my nephew may have > to remove his from his LHD '64 BJ8. So the brake fluid reservoir is in the > way, plus its pipework and the steering column...or is that a bit lower? > > Anyhow, can one get the 8-way box out without a major kerfuffle or what does > one have to do? Just grow tiny treble jointed wrists and elbows? The usual > in fact.. > > Thanks, > > Simon > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com > > > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 2 > Date: Fri, 24 Feb 2017 10:10:21 -0000 > From: "Bluehealey" > To: > Subject: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: <059801d28e86$35ed6d40$a1c847c0$@gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Team. > > This is a shout out to report a problem with the Austin Healey Club USA > (Healey.org) website. I'm trying to renew my membership and the site isn't > accepting my username/password. I know they are correct as they are written > down in my secrets stash and also cached in my Chrome browser. > > On trying to exercise the 'forgotten password' link, that also fails as the > 'Captcha' applet appears to be broken too. > > > > Any suggestions what the quick and dirty might be to get membership renewed > as it expired 3 days ago (according to my Outlook calendar) and I don't want > to miss my magazine fix? > > Cheers all. > > > > AlanB > > cid:image001.png at 01D18856.FC90FB60 > > > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image001.png > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 3 > Date: Fri, 24 Feb 2017 06:20:33 -0800 > From: Bob Spidell > To: healeys at autox.team.net > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hmmm ... Didn't find any webmaster info, but the President's--Mark > Schneider--phone# is on the 'Contact Us' page: 503-643-7208 > > I'd say this is an emergency; go straight to the top! > > Bob > > >> On 2/24/2017 2:10 AM, Bluehealey wrote: >> >> Team. >> >> This is a shout out to report a problem with the Austin Healey Club >> USA (Healey.org) website. I?m trying to renew my membership and the >> site isn?t accepting my username/password. I know they are correct as >> they are written down in my secrets stash and also cached in my Chrome >> browser. >> >> On trying to exercise the ?forgotten password? link, that also fails >> as the ?Captcha? applet appears to be broken too. >> >> Any suggestions what the quick and dirty might be to get membership >> renewed as it expired 3 days ago (according to my Outlook calendar) >> and I don?t want to miss my magazine fix? >> >> Cheers all. >> >> AlanB >> >> cid:image001.png at 01D18856.FC90FB60 >> >> >> >> Virus-free. www.avast.com >> >> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 4 > Date: Fri, 24 Feb 2017 09:14:00 -0600 > From: "E.A. Driver" > To: healeys at autox.team.net > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: <48e19606-dba8-daeb-852b-7d9f4b793968 at sasktel.net> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Bob and Alan > > The web master of AHCUSA is Tracy Drummond his email address is > bighealey AT charter.net and > membership director is Mark Schneider Marksbj8 AT icloud.,com > > Cheers > Ed > Saskatoon, Saskatchewan > > > > >> On 24/02/2017 8:20 AM, Bob Spidell wrote: >> >> Hmmm ... Didn't find any webmaster info, but the President's--Mark >> Schneider--phone# is on the 'Contact Us' page: 503-643-7208 >> >> I'd say this is an emergency; go straight to the top! >> >> Bob >> >> >>> On 2/24/2017 2:10 AM, Bluehealey wrote: >>> >>> Team. >>> >>> This is a shout out to report a problem with the Austin Healey Club >>> USA (Healey.org) website. I?m trying to renew my membership and the >>> site isn?t accepting my username/password. I know they are correct as >>> they are written down in my secrets stash and also cached in my >>> Chrome browser. >>> >>> On trying to exercise the ?forgotten password? link, that also fails >>> as the ?Captcha? applet appears to be broken too. >>> >>> Any suggestions what the quick and dirty might be to get membership >>> renewed as it expired 3 days ago (according to my Outlook calendar) >>> and I don?t want to miss my magazine fix? >>> >>> Cheers all. >>> >>> AlanB >>> >>> cid:image001.png at 01D18856.FC90FB60 >>> >>> >>> >>> Virus-free. www.avast.com >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Support Team.Nethttp://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive:http://www.team.net/archive >>> Forums:http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >>> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 5 > Date: Fri, 24 Feb 2017 15:58:58 +0000 > From: Jean Caron > To: Bluehealey , "healeys at autox.team.net" > > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: > > > Content-Type: text/plain; charset="windows-1252" > > Perhaps send a message to Tracy Drummond at bighealey at charter.net, he looks after the website. I just renewed my membership 4 days ago and has no problem. > > > Jean > > > ________________________________ > From: Healeys on behalf of Bluehealey > Sent: February 24, 2017 10:10 AM > To: healeys at autox.team.net > Subject: [Healeys] AH Club USA - membership renewal. Help? > > > Team. > > This is a shout out to report a problem with the Austin Healey Club USA (Healey.org) website. I?m trying to renew my membership and the site isn?t accepting my username/password. I know they are correct as they are written down in my secrets stash and also cached in my Chrome browser. > > On trying to exercise the ?forgotten password? link, that also fails as the ?Captcha? applet appears to be broken too. > > > > Any suggestions what the quick and dirty might be to get membership renewed as it expired 3 days ago (according to my Outlook calendar) and I don?t want to miss my magazine fix? > > Cheers all. > > > > AlanB > > [cid:image001.png at 01D18856.FC90FB60] > > > > [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif] Virus-free. www.avast.com > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image001.png > Type: image/png > Size: 14962 bytes > Desc: image001.png > URL: > > ------------------------------ > > Message: 6 > Date: Fri, 24 Feb 2017 08:18:10 -0800 > From: "Roger Grace" > To: "Healey List" > Subject: [Healeys] Trans oil foaming > Message-ID: <8515F329CB4643728B47B2F3B9EA5C52 at WINDOWST93OFP9> > Content-Type: text/plain; charset="utf-8" > > I recently had the OD on my BJ8 apart to replace some parts ? bearing/accumulator/gaskets/O rings etc. > For a first sort of sacrificial oil fill I decided to use a non detergent Castrol 30 wt oil. Date codes less than 18 months old. Plan was to switch to the expensive Redline MT90 after testing and after a few hundred miles. This 30 WT oil is often recommended by OD experts. I have built an electric variable speed rest rid to be able to test the transmission outside the car. > Overdrive worked fine and transmission sounded OK and ran it for about 2 hours to get the temp up (52C on OD case) and hunt for leaks. > So far so good. > > Then after a few days of standing, and 2 minutes of running, I drained the oil (to fix a leak) and was amazed to see that the oil had foamed badly and there were big classic fish eye bubbles on the surface of the oil. Ambient was about 14C. I did note that the oil coming out of the transmission was somewhat foamier than that from the overdrive drain plug. > See enclosed pix. > After standing overnight the oil looked normal again. > > What disturbs me is that unless I had drained the oil I would not have been aware of the foaming and put it into service .... > Have now replaced with the MT90 that shows no sign of foaming on the dip stick. > Wonder if others have any ideas about this weird phenomenon and is it a concern ? > rg > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170128_122945.jpg > Type: image/jpeg > Size: 121928 bytes > Desc: not available > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170127_210053.jpg > Type: image/jpeg > Size: 336102 bytes > Desc: not available > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170127_210045.jpg > Type: image/jpeg > Size: 187940 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 7 > Date: Fri, 24 Feb 2017 11:02:06 -0700 > From: "R. Lindsay" <050.rpl at gmail.com> > To: Healey List > Subject: [Healeys] Heat Shield Install > Message-ID: <889A0377-D268-4526-BE91-9DF490CE0CA2 at gmail.com> > Content-Type: text/plain; charset=us-ascii > > I would like to replace the heat shields in the engine bay of my BJ8. Is it possible with the engine in place? There are three screws across the one on the fire wall how do I get to the middle one? Can the foot well pieces be accessed from below? > > Any words of wisdom or direction would be wonderful. Thanks in advance. > > Price Lindsay > 67 BJ8 > > Sent from my iPhone > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Healeys mailing list > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > > ------------------------------ > > End of Healeys Digest, Vol 10, Issue 63 > *************************************** From bspidell at comcast.net Thu Mar 2 20:37:42 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 3 Mar 2017 04:37:42 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> <047701d293a9$b0d71f10$12855d30$@roadrunner.com> And get a spin-on oil filter adapter so you have time to do all the fun stuff ;) -------------------------------- Bob Spidell - San Jose, CA > On March 3, 2017 at 1:13 AM David Nock BCS wrote: > > Top it off with a Mallory distributor and MSD ignition and you are rocking it. The final the cooling system off with an aluminium radiator. > > David Nock > British Car Specialists > 209-948-8767 > www.britishcarspecialists.com > > From: Bruce Steele mailto:healeybruce at roadrunner.com > Sent: Thursday, March 02, 2017 3:06 PM > To: 'Bob Spidell' mailto:bspidell at comcast.net ; 'Ahealey help' mailto:healeys at autox.team.net ; '1 2' mailto:healeydohdahman at gmail.com > Subject: Re: [Healeys] Engine Rebuild Modifications > > > Good list, Bob. When completed, my engine will have the Denis Welch DWR1 cam, bucket tappets, hollow push rods, DW 85mm pistons, DW lightened flywheel and a diaphragm style 9.5? Jaguar clutch, along with the DW high capacity oil pump I already had installed. The floor of the water jacket has also been epoxied to seal any possible leaks from the oil gallery. > > > > My exhaust manifolds were previously Jet-Hot coated, but Jet-Hot has since been through bankruptcy and is not owned by another company, though still operating under that brand. With this rebuild, I am using a company called IA Coatings in Houston for ceramic coating of the exhaust and intake manifolds. > > > > The transmission has been rebuilt with DW 1st, reverse and cluster gears, synchros, with a new hardened DW gear lever. > > > > I also use modern K&N oil and air filters. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell > Sent: Thursday, March 02, 2017 7:22 AM > To: Ahealey help ; 1 2 > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: > > > > * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters > * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality > * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) > * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. > * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification > * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' > * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem > > I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. > > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > > > > > On March 2, 2017 at 6:07 AM 1 2 wrote: > > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net mailto:Healeys at autox.team.net > > http://autox.teamnet/mailman/listinfo/healeys http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > > > > --------------------------------------------- > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Thu Mar 2 21:23:32 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Fri, 3 Mar 2017 04:23:32 +0000 Subject: [Healeys] Healeys Digest, Vol 10, Issue 63 References: , Mark is home but very busy with other Club matters. I have talked with him today and he is leaving in one week for a 2 week period. Both he and Tracy are aware of the problems with the website, he told me it works for some and not for others and they are working on it. Jean ________________________________ From: Healeys on behalf of John and Judy Carter Sent: March 3, 2017 12:37 AM To: healeys at autox.team.net Subject: Re: [Healeys] Healeys Digest, Vol 10, Issue 63 Mark Schneider is out of town and may not be receiving emails. Sent from my iPhone -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Fri Mar 3 01:56:54 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Fri, 3 Mar 2017 08:56:54 +0000 Subject: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 engine/transmission >> to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig From austinhealeyslist at gmail.com Fri Mar 3 02:40:35 2017 From: austinhealeyslist at gmail.com (Austin Healeys List) Date: Fri, 3 Mar 2017 22:40:35 +1300 Subject: [Healeys] cockpit finisher rail nuts Does anyone know what sort of nuts are used on the two left/right side forward ali cockpit trim rail screws behind the shut pillars on a BN4? The others going around the rear have J shaped brackets but there doesn't appear to be enough room to get them in behind the shroud at the front. The parts listings don't seem to show anything. Andy. From josef-eckert at t-online.de Fri Mar 3 05:56:28 2017 From: josef-eckert at t-online.de (josef-eckert at t-online.de) Date: Fri, 3 Mar 2017 13:56:28 +0100 (MET) Subject: [Healeys] cockpit finisher rail nuts References: No nuts, same screws as on the door trim rails. -----Original-Nachricht----- Betreff: [Healeys] cockpit finisher rail nuts Datum: 2017-03-03T11:11:30+0100 Von: "Austin Healeys List" An: "healeys at autox.team.net" Does anyone know what sort of nuts are used on the two left/right side forward ali cockpit trim rail screws behind the shut pillars on a BN4? The others going around the rear have J shaped brackets but there doesn't appear to be enough room to get them in behind the shroud at the front. The parts listings don't seem to show anything. Andy. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ? From healeybruce at roadrunner.com Fri Mar 3 07:59:56 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Fri, 3 Mar 2017 06:59:56 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> Good point. Everyone that I know who has Putzke's Fahrpass tube shock conversion loves it. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Peter Dzwig Sent: Friday, March 03, 2017 12:57 AM To: Healey Subject: Re: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 >> engine/transmission to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html Suggested annual >> donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com From healeydoc at sbcglobal.net Fri Mar 3 09:12:30 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Fri, 3 Mar 2017 08:12:30 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> This list could go on and on and on, and most all on them are reversable if you want to go back to original. Tube shocks front and rear Torrington Bearings in front upper trunnions Heavy duty sway bars front and rear Torque bars on rear end Headers New steering column worm to eliminate slop Retractable seat belts Inertia fuel pump cut off Cruise control Power brakes on the earlier cars Aluminium Radiator with or without pusher fan LED strip underdash lighting Power supply outlets David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com -----Original Message----- From: Bruce Steele Sent: Friday, March 03, 2017 6:59 AM To: pdzwig at summaventures.com ; 'Healey' Subject: Re: [Healeys] Engine Rebuild Modifications Good point. Everyone that I know who has Putzke's Fahrpass tube shock conversion loves it. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Peter Dzwig Sent: Friday, March 03, 2017 12:57 AM To: Healey Subject: Re: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 >> engine/transmission to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html Suggested annual >> donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net From austinhealeyslist at gmail.com Fri Mar 3 12:58:33 2017 From: austinhealeyslist at gmail.com (Austin Healeys List) Date: Sat, 4 Mar 2017 08:58:33 +1300 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> These are all available as a pre-assembled kit now, search for part number mx5 On 3/4/17, David Nock BCS wrote: > This list could go on and on and on, and most all on them are reversable if > > you want to go back to original. > Tube shocks front and rear > Torrington Bearings in front upper trunnions > Heavy duty sway bars front and rear > Torque bars on rear end > Headers > New steering column worm to eliminate slop > Retractable seat belts > Inertia fuel pump cut off > Cruise control > Power brakes on the earlier cars > Aluminium Radiator with or without pusher fan > LED strip underdash lighting > Power supply outlets From boyracer466 at gmail.com Fri Mar 3 17:47:11 2017 From: boyracer466 at gmail.com (richard mayor) Date: Fri, 3 Mar 2017 16:47:11 -0800 Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. [image: Inline image 1] -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3841.jpg Type: image/jpeg Size: 2173950 bytes Desc: not available URL: From cnaarndt at gmail.com Sat Mar 4 09:23:57 2017 From: cnaarndt at gmail.com (Curtis Arndt) Date: Sat, 4 Mar 2017 08:23:57 -0800 Subject: [Healeys] Parts Wanted and for Sale Listers, I'm in need of a BN1/2 distributor drive spindle. I have a good distributor, so if anyone has an old busted up distributor that they'd be willing to part with I'd be interested. Also a friend has a set of four early, flat hub BN1 wire wheels for sale. I may already have a buyer, but if this falls through. is anyone needing a set? I don't have a price yet but the condition is described as very good, and I hope to have photos in a week. Cheers, Curt Arndt Carlsbad, CA '55 BN1, '60 AN5 :{) '72 RWA MG Midget, '06 Cooper S -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Sat Mar 4 10:24:51 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sat, 4 Mar 2017 12:24:51 -0500 Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From llennep at verizon.net Sat Mar 4 11:51:38 2017 From: llennep at verizon.net (llennep at verizon.net) Date: Sat, 04 Mar 2017 12:51:38 -0600 (CST) Subject: [Healeys] Heat Shields In 2000 or so I found material like the orig stuff. It came from a local boiler supply house. Looked exactly like the orig. I merely cut it and covered it with a few coats of a clear coat, not sure of its composition right now. Turned out perfectly. Keith On 03/04/17, R. Lindsay <050.rpl at gmail.com> wrote: I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From sentenac.rw at gmail.com Sat Mar 4 11:58:47 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sat, 04 Mar 2017 10:58:47 -0800 Subject: [Healeys] Heat Shields References: It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From 050.rpl at gmail.com Sat Mar 4 12:01:44 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sat, 4 Mar 2017 14:01:44 -0500 Subject: [Healeys] Heat Shields References: Thank you Roland. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 4, 2017, at 1:58 PM, sentenac.rw at gmail.com wrote: > > It is a two-part refinishing process. First part is two coats of > Rustoleum Clean Metal Primer 7780830. Then you apply a very light > coat of MinWax Polyurethane Clear Satin to seal the surface and make > it cleanable. Both are spray cans and each can contains enough for a > dozen cars :-) You don't want the urethane to look shiny. The > instructions are included with Moss's kit. The primer is a nice > off-white that Roger found to match the original color. > > -Roland > BN1 #724 with heat shields installed but not ready for the road > >> On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >> >> I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? >> >> Thank you in advance. >> >> Price Lindsay >> 67 BJ8 >> > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > From jmsdarch at sbcglobal.net Sat Mar 4 12:32:18 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 4 Mar 2017 11:32:18 -0800 Subject: [Healeys] Heat Shields References: White high temperature paint. John Spaur 62? BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 4, 2017 9:25 AM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Sat Mar 4 12:51:08 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Sat, 4 Mar 2017 11:51:08 -0800 (PST) Subject: [Healeys] BJ8 door latch weld repair Someone, I think Len had a repair for a worn BJ8 door latch. Mine wobbles on its shaft. I am thinking to grind a small v around the pivot pin into the latch plate and then weld into the v. Any other suggestions?Thanks,Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Sat Mar 4 13:52:19 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Sat, 4 Mar 2017 20:52:19 +0000 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> Glad to be of help. That's what the list is for.# Peter PS Please ignore the spam warning. I have changed ISP and it is giving me headaches. Advice on sorting it out would be appreciated! On 03/03/2017 21:29, 1 2 wrote: > Many thanks to those that have answered and been patient with this. Of course > there is no one size fits all answer, but a lot of food for thought. The > comments from Peter and others hit the nail on the head for me - I dither > mightily because of the need to balance all the factors. This is a great list > to start from for ideas to build a plan. > > On Fri, Mar 3, 2017 at 9:12 AM, David Nock BCS > This list could go on and on and on, and most all on them are reversable if > you want to go back to original. > Tube shocks front and rear > Torrington Bearings in front upper trunnions > Heavy duty sway bars front and rear > Torque bars on rear end > Headers > New steering column worm to eliminate slop > Retractable seat belts > Inertia fuel pump cut off > Cruise control > Power brakes on the earlier cars > Aluminium Radiator with or without pusher fan > LED strip underdash lighting > Power supply outlets > > > David Nock > British Car Specialists > 209-948-8767 > www.britishcarspecialists.com > > > -----Original Message----- From: Bruce Steele > Sent: Friday, March 03, 2017 6:59 AM > > Subject: Re: [Healeys] Engine Rebuild Modifications > > Good point. Everyone that I know who has Putzke's Fahrpass tube shock > conversion loves it. > > Bruce Steele > Brea, CA > 1960 BN7 > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net > Dzwig > Sent: Friday, March 03, 2017 12:57 AM > Subject: Re: [Healeys] Engine Rebuild Modifications > > It all depends what YOU want out of the exercise. > > Interesting that no-one has mentioned handling and ride comfort. > > I would do the usual mods to the engine, with the DW cam or similar (I used > a version of the race version of the BJ8 cam which went really well because > it was tailored to my requirements). High compression pistons work well with > a modern-fuel-compatible head and modern set up. Personally I used Hepolites > Lighten as much as poss and make sure it is all balanced and that whatever > your heating/cooling needs are, are taken care of and make sure that you > avoid excessive heat to the fuel lines. Carbs can be whatever you want. > Personally I like SUs but not everyone does. > > I mention ride because when you have done all that you do to your engine and > transmission, it has to be usable when you drive it. I drove a couple of > Healeys recently both of which had more power than they could reasonably > handle over the sort of roads we were on. Look at your suspension carefully > and make sure that you get the level of firmness that YOU want. I used poly > bushes, anti-roll bars and tinkered with bits to get a ride that was good > enough to impress the late Alan Cameron storming up Prescott (which he ran > at the time). > > Peter > > > > On March 2, 2017 at 6:07 AM 1 2 > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 > engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation > $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeydohdahman at gmail.com > > > -- =========================================================== Dr Peter Dzwig From ahbn6 at verizon.net Sat Mar 4 14:13:30 2017 From: ahbn6 at verizon.net (John Sims) Date: Sat, 04 Mar 2017 16:13:30 -0500 Subject: [Healeys] Heat Shields References: Look at: http://healey6.com/replacement_parts.htm It is called hardie board and can be found at Home Depot. Basically it is the waterproof cement impregnated backing used in showers in place of plasterboard. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 04, 2017 12:25 PM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From go2ghill at aol.com Sat Mar 4 16:37:07 2017 From: go2ghill at aol.com (Greg Hill) Date: Sat, 4 Mar 2017 18:37:07 -0500 Subject: [Healeys] Engine rebuild Good list of modifications when rebuilding an engine, but would be interested in hearing about the additional costs for parts and labor. Also can we hear more about adding a Jaguar diaphragm style clutch. Greg Hill 58 BN4 67 BJ8 Sent from AOL Mobile Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From llennep at verizon.net Sat Mar 4 18:11:34 2017 From: llennep at verizon.net (llennep at verizon.net) Date: Sat, 04 Mar 2017 19:11:34 -0600 (CST) Subject: [Healeys] Heat Shields Did not mention it but the stuff I refer to had the same "grid" pattern in it like would appear if it were dried on a wire rack. On 03/04/17, llennep at verizon.net wrote: In 2000 or so I found material like the orig stuff. It came from a local boiler supply house. Looked exactly like the orig. I merely cut it and covered it with a few coats of a clear coat, not sure of its composition right now. Turned out perfectly. Keith On 03/04/17, R. Lindsay <050.rpl at gmail.com> wrote: I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From YNOTINK at msn.com Sat Mar 4 19:31:52 2017 From: YNOTINK at msn.com (WILLIAM B LAWRENCE) Date: Sun, 5 Mar 2017 02:31:52 +0000 Subject: [Healeys] Heat Shields References: , <003601d2952c$2cd434d0$867c9e70$@verizon.net> Instead of the portland cement waterproof wall board called Hardiebacker it is their thinner soffit material. Bill Lawrence BN1 #554 ________________________________ From: Healeys on behalf of John Sims Sent: Saturday, March 4, 2017 9:13:30 PM To: 'R. Lindsay'; 'Healey List' Subject: Re: [Healeys] Heat Shields Look at: http://healey6.com/replacement_parts.htm It is called hardie board and can be found at Home Depot. Basically it is the waterproof cement impregnated backing used in showers in place of plasterboard. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 04, 2017 12:25 PM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From derek.c.job at gmail.com Sun Mar 5 01:38:04 2017 From: derek.c.job at gmail.com (Derek Job) Date: Sun, 5 Mar 2017 08:38:04 +0000 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> <479c2f4f-5d6a-8a7b-9ac0-830288b5b780@summaventures.com> ?are these a list of modifications for a Healey or for a Custom Car? On Sat, Mar 4, 2017 at 8:52 PM, Peter Dzwig wrote: > Glad to be of help. That's what the list is for.# > > Peter > > PS Please ignore the spam warning. I have changed ISP and it is giving me > headaches. Advice on sorting it out would be appreciated! > > On 03/03/2017 21:29, 1 2 wrote: > > Many thanks to those that have answered and been patient with this. Of > course > > there is no one size fits all answer, but a lot of food for thought. The > > comments from Peter and others hit the nail on the head for me - I dither > > mightily because of the need to balance all the factors. This is a > great list > > to start from for ideas to build a plan. > > > > On Fri, Mar 3, 2017 at 9:12 AM, David Nock BCS > > > This list could go on and on and on, and most all on them are > reversable if > > you want to go back to original. > > Tube shocks front and rear > > Torrington Bearings in front upper trunnions > > Heavy duty sway bars front and rear > > Torque bars on rear end > > Headers > > New steering column worm to eliminate slop > > Retractable seat belts > > Inertia fuel pump cut off > > Cruise control > > Power brakes on the earlier cars > > Aluminium Radiator with or without pusher fan > > LED strip underdash lighting > > Power supply outlets > > > > > > David Nock > > British Car Specialists > > 209-948-8767 > > www.britishcarspecialists.com > > > > > > -----Original Message----- From: Bruce Steele > > Sent: Friday, March 03, 2017 6:59 AM > 'Healey' > > > > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > Good point. Everyone that I know who has Putzke's Fahrpass tube > shock > > conversion loves it. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > -----Original Message----- > > From: Healeys [mailto:healeys-bounces at autox.team.net > > Dzwig > > Sent: Friday, March 03, 2017 12:57 AM > > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > It all depends what YOU want out of the exercise. > > > > Interesting that no-one has mentioned handling and ride comfort. > > > > I would do the usual mods to the engine, with the DW cam or similar > (I used > > a version of the race version of the BJ8 cam which went really well > because > > it was tailored to my requirements). High compression pistons work > well with > > a modern-fuel-compatible head and modern set up. Personally I used > Hepolites > > Lighten as much as poss and make sure it is all balanced and that > whatever > > your heating/cooling needs are, are taken care of and make sure that > you > > avoid excessive heat to the fuel lines. Carbs can be whatever you > want. > > Personally I like SUs but not everyone does. > > > > I mention ride because when you have done all that you do to your > engine and > > transmission, it has to be usable when you drive it. I drove a > couple of > > Healeys recently both of which had more power than they could > reasonably > > handle over the sort of roads we were on. Look at your suspension > carefully > > and make sure that you get the level of firmness that YOU want. I > used poly > > bushes, anti-roll bars and tinkered with bits to get a ride that was > good > > enough to impress the late Alan Cameron storming up Prescott (which > he ran > > at the time). > > > > Peter > > > > > > > > On March 2, 2017 at 6:07 AM 1 2 > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 > > engine/transmission to modernize it? > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual > > donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/bspidell@ > comcast.net > > bspidell at comcast.net> > > > > > > -- > > > > =========================================================== > > Dr Peter Dzwig > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation > > $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/healeybruce@ > roadrunner.com > > healeybruce at roadrunner.com> > > > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/healeydoc@ > sbcglobal.net > > healeydoc at sbcglobal.net> > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/ > healeydohdahman at gmail.com > > healeydohdahman at gmail.com> > > > > > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/derek.c.job at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Sun Mar 5 08:28:44 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:28:44 -0800 Subject: [Healeys] Heat Shields References: I just installed the Moss kit a couple of weeks ago. Here are a couple of in-progress shots of what they look like finished as described. The kit works very well. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of sentenac.rw at gmail.com Sent: Saturday, March 04, 2017 10:59 AM To: R. Lindsay <050.rpl at gmail.com> Cc: 'Austin Healey list' Subject: Re: [Healeys] Heat Shields It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I've looked through the archives and on John Simm's site and can't find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com -------------- next part -------------- A non-text attachment was scrubbed... Name: 0204171736.jpg Type: image/jpeg Size: 98022 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 0128171559a.jpg Type: image/jpeg Size: 60163 bytes Desc: not available URL: From healeybruce at roadrunner.com Sun Mar 5 08:32:50 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:32:50 -0800 Subject: [Healeys] Heat Shields References: Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to cut the cement board oneself. I know I could not have done nearly as precise a job with a sabre saw and drill. Plus, my old ones were inaccurate and poorly fabricated, and would have made really crappy patterns. The kit is well worth the cost. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Bruce Steele [mailto:healeybruce at roadrunner.com] Sent: Sunday, March 05, 2017 7:29 AM To: 'sentenac.rw at gmail.com' ; 'R. Lindsay' <050.rpl at gmail.com>; 'Austin Healey list' Subject: RE: [Healeys] Heat Shields I just installed the Moss kit a couple of weeks ago. Here are a couple of in-progress shots of what they look like finished as described. The kit works very well. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of sentenac.rw at gmail.com Sent: Saturday, March 04, 2017 10:59 AM To: R. Lindsay <050.rpl at gmail.com> Cc: 'Austin Healey list' Subject: Re: [Healeys] Heat Shields It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I've looked through the archives and on John Simm's site and can't find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com From healeybruce at roadrunner.com Sun Mar 5 08:34:12 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:34:12 -0800 Subject: [Healeys] Engine mods - Headers References: Very nicely fabricated! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Friday, March 03, 2017 4:47 PM To: healeys Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From sentenac.rw at gmail.com Sun Mar 5 17:02:27 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sun, 05 Mar 2017 16:02:27 -0800 Subject: [Healeys] Heat Shields References: <01d101d295c5$c080ad00$41820700$@roadrunner.com> I'll second Bruce's comment. The Moss kit comes with the parts pre cut so that they will fit against each other as they should. They specially made thick washers would take effort to dublicate. If you are going to make your own parts it will take time and probably a few re-makes. Roger Moment's instructions come with it and are very detailed (and of course based on a lot of experience). If you are going to try to cut Hardi panels of any sort you will create a lot of cement dust and dull blades, and possibly a saw motor worn out by the abrasive dust. Getting inside corners and rectangular slots just right can be challenging, too. Having cut a couple of hundred feet of Hardi siding I speak from experience. Just saying. -Roland BN1 #724 On Sun, 5 Mar 2017 07:32:50 -0800, Bruce wrote: >Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to >cut the cement board oneself. I know I could not have done nearly as >precise a job with a sabre saw and drill. Plus, my old ones were inaccurate >and poorly fabricated, and would have made really crappy patterns. The kit >is well worth the cost. > >Bruce Steele >Brea, CA >1960 BN7 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From bspidell at comcast.net Sun Mar 5 17:13:49 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 5 Mar 2017 16:13:49 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> Single exhaust on a 6-cyl Healey? On 3/5/2017 7:34 AM, Bruce Steele wrote: > > Very nicely fabricated! > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > You need a good set of headers and I have one for sale. > Inline image 1 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From austin.healey at gmail.com Sun Mar 5 22:16:31 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Mon, 6 Mar 2017 16:16:31 +1100 Subject: [Healeys] Engine mods - Headers References: You won't be fitting those into a standard Healey engine bay! Are they special ones to keep your (LHD) feet warm? :-) Sent from my iPhone > On 4 Mar. 2017, at 11:47 am, richard mayor wrote: > > You need a good set of headers and I have one for sale. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > From p_cquinn at tpg.com.au Sun Mar 5 22:23:48 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Mon, 6 Mar 2017 16:23:48 +1100 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <950b2141-66be-f74d-48ad-c50d2d65386f@comcast.net> Hello The very early 100/6 BN4s had a two into one muffler and a single tail pipe. Hoo Roo Patrick Quinn From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Monday, 6 March 2017 11:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Engine mods - Headers Single exhaust on a 6-cyl Healey? On 3/5/2017 7:34 AM, Bruce Steele wrote: Very nicely fabricated! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Friday, March 03, 2017 4:47 PM Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. Inline image 1 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/bspidell at comcast.net -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From coudesluijs at chello.nl Mon Mar 6 01:01:56 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Mon, 6 Mar 2017 09:01:56 +0100 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> It is beautifully made but it is a pity the pipes are not equally length and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 joint is not correct. The joining pipe of a smaller diameter than the other. Kees Oudesluijs > Very nicely fabricated! > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > You need a good set of headers and I have one for sale. > Inline image 1 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From pdzwig at summaventures.com Mon Mar 6 02:37:40 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Mon, 6 Mar 2017 09:37:40 +0000 Subject: [Healeys] Engine mods - Headers I wonder what the gas flow dynamics are like with a structure like that. I wouldn't have thought that the flow was very free from a cursory glance. It's those choking bends and the long flat(?) runs that worry me. Patrick is as ever right about these things, 100/6s did use a single exhaust as did works rally cars. Peter -- =========================================================== Dr Peter Dzwig From austin.healey at gmail.com Mon Mar 6 04:39:25 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Mon, 6 Mar 2017 22:39:25 +1100 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> I was being sarcastic about the foot warmers. Seriously Men. 101 exhaust systems theory. You all passed. Now - all you need to do is fit your perfect, identical length pipes inside your body/ chassis structure. Equal lengths, 3 into 2, 2 into 1. Yep Awesome theory. Right out of a Text book. Humor me. This isn't my design. So flush your books, and look again. Focus on the pipe length from the block to the horizontal pipe. Holy shit!! That side pipe is so far away from my engine block..... Then punch yourself in the face. My guess? Extractors to fit like the 1967 RAC car. -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 885755 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On 6 Mar. 2017, at 8:37 pm, Peter Dzwig wrote: > > I wonder what the gas flow dynamics are like with a structure like that. I > wouldn't have thought that the flow was very free from a cursory glance. It's > those choking bends and the long flat(?) runs that worry me. > > Patrick is as ever right about these things, 100/6s did use a single exhaust as > did works rally cars. > > Peter > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > From healeyguy at aol.com Mon Mar 6 13:56:07 2017 From: healeyguy at aol.com (healeyguy at aol.com) Date: Mon, 6 Mar 2017 15:56:07 -0500 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> Listers Headers can play an important part of an engine build and the design of the exhaust system does impact the tune of a car, ?but? the use of the car, grocery getter, daily driver, trailer queen, track or high speed at full throttle dictates what parts you add and the intended benefit those parts may or may not give your build. The headers shown in previous posts will flow better than any stock system. Is it necessary for street cars, probably not. Does it produce 10% more horsepower, maybe. Is that what your after? Maybe the torque curve is more important?.. There is a long list of things to consider when contemplating a change from the stock setup. Aloha Perry 1955 BN2 10.1 to 1 compression on 90 something octane. (Yes Harriet you can run that much compression on the street.) Bench flowed intake and exhaust ports Larger 100-Six valves Reshaped combustion chambers in head 1-3/4 carbs Delta reprofiled cam -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 6 16:09:31 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 6 Mar 2017 23:09:31 -0000 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> <20170306214554.A982925888BA@autox.team.net> We might be going slightly off track here?but I put three HD6s in place of the HS4s on my tricarb. Also a set of headers at the same time. Made a very appreciable difference. Mind you, those original exhaust manifolds are pretty rough old things. Ever looked inside one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeyguy at aol.com Sent: 06 March 2017 20:56 To: Healey Forum Subject: Re: [Healeys] Engine mods - Headers Listers Headers can play an important part of an engine build and the design of the exhaust system does impact the tune of a car, ?but? the use of the car, grocery getter, daily driver, trailer queen, track or high speed at full throttle dictates what parts you add and the intended benefit those parts may or may not give your build. The headers shown in previous posts will flow better than any stock system. Is it necessary for street cars, probably not. Does it produce 10% more horsepower, maybe. Is that what your after? Maybe the torque curve is more important?.. There is a long list of things to consider when contemplating a change from the stock setup. Aloha Perry 1955 BN2 10.1 to 1 compression on 90 something octane. (Yes Harriet you can run that much compression on the street.) Bench flowed intake and exhaust ports Larger 100-Six valves Reshaped combustion chambers in head 1-3/4 carbs Delta reprofiled cam -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:42:55 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:42:55 -0800 Subject: [Healeys] Engine mods - Headers References: <62DC7E55-F01F-40D4-961B-851D4CD6817F@gmail.com> They do fit.... and without any cutting! On Sun, Mar 5, 2017 at 9:16 PM, Chris Dimmock wrote: > You won't be fitting those into a standard Healey engine bay! > Are they special ones to keep your (LHD) feet warm? > :-) > > Sent from my iPhone > > > On 4 Mar. 2017, at 11:47 am, richard mayor > wrote: > > > > You need a good set of headers and I have one for sale. > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/austin.healey at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:47:16 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:47:16 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <950b2141-66be-f74d-48ad-c50d2d65386f@comcast.net> <00e101d29639$d6cfa380$846eea80$@tpg.com.au> The 2 two 1 "wye" is a slip fit. And, that is exactly what I use on my race car. One could use the wye, or not. On Sun, Mar 5, 2017 at 9:23 PM, Patrick & Caroline Quinn < p_cquinn at tpg.com.au> wrote: > Hello > > > > The very early 100/6 BN4s had a two into one muffler and a single tail > pipe. > > > > Hoo Roo > > > > Patrick Quinn > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *Bob > Spidell > *Sent:* Monday, 6 March 2017 11:14 AM > *To:* healeys at autox.team.net > *Subject:* Re: [Healeys] Engine mods - Headers > > > > Single exhaust on a 6-cyl Healey? > > > > On 3/5/2017 7:34 AM, Bruce Steele wrote: > > Very nicely fabricated! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > > > You need a good set of headers and I have one for sale. > [image: Inline image 1] > > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From boyracer466 at gmail.com Mon Mar 6 17:50:50 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:50:50 -0800 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> Not only do they fit without cutting, they are 1-3/4" tubes, which means they are 1-5/8" ID ----- exactly the same size as the exhaust ports. On Mon, Mar 6, 2017 at 3:39 AM, Chris Dimmock wrote: > I was being sarcastic about the foot warmers. > Seriously Men. > 101 exhaust systems theory. > You all passed. > Now - all you need to do is fit your perfect, identical length pipes > inside your body/ chassis structure. > Equal lengths, 3 into 2, 2 into 1. Yep > Awesome theory. Right out of a Text book. > Humor me. This isn't my design. > So flush your books, and look again. > Focus on the pipe length from the block to the horizontal pipe. > Holy shit!! > That side pipe is so far away from my engine block..... > Then punch yourself in the face. > My guess? Extractors to fit like the 1967 RAC car. > > > > > > Sent from my iPhone > > > On 6 Mar. 2017, at 8:37 pm, Peter Dzwig > wrote: > > > > I wonder what the gas flow dynamics are like with a structure like that. > I > > wouldn't have thought that the flow was very free from a cursory glance. > It's > > those choking bends and the long flat(?) runs that worry me. > > > > Patrick is as ever right about these things, 100/6s did use a single > exhaust as > > did works rally cars. > > > > Peter > > > > -- > > > > =========================================================== > > Dr Peter Dzwig > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/austin.healey at gmail.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:58:08 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:58:08 -0800 Subject: [Healeys] Headers They fit! Here's what my headers look like in my engine bay. They are the same as the other set only mine are ceramic coated. -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 18:00:56 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 17:00:56 -0800 Subject: [Healeys] Headers [image: Inline image 1] -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Headers - My headers 001.jpg Type: image/jpeg Size: 400520 bytes Desc: not available URL: From fredwescoe at gmail.com Mon Mar 6 18:08:28 2017 From: fredwescoe at gmail.com (Fred Wescoe) Date: Mon, 6 Mar 2017 20:08:28 -0500 Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Mon Mar 6 22:14:43 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Mon, 6 Mar 2017 21:14:43 -0800 Subject: [Healeys] Headers References: That?s pretty impressive! John Spaur ?62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Monday, March 6, 2017 5:01 PM To: healeys Subject: [Healeys] Headers -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 33458 bytes Desc: not available URL: From jmsdarch at sbcglobal.net Mon Mar 6 22:24:50 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Mon, 6 Mar 2017 21:24:50 -0800 Subject: [Healeys] Overdrive References: Fred, I don?t fully understand the issue. My experience with OD?s is that the lever could be misadjusted if it lines up with the hole. Counter intuitive I know, but parts wear. That said, when driving, to disengage the OD once the switch has been turned off one needs to quickly punch the gas pedal. That causes it to disengage. John 6?2 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: Monday, March 6, 2017 5:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From pollpete at ix.netcom.com Mon Mar 6 23:59:57 2017 From: pollpete at ix.netcom.com (P.M. Pollock) Date: Mon, 6 Mar 2017 22:59:57 -0800 Subject: [Healeys] OT: '71 Midget Mk III Listers, I'd appreciate any comments about the '71 Midget Mk III my son is proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- implies I'm knowledgeable about the other LBCs. https://redding.craigslist.org/cto/5984510714.html Anything about the cars in general or this one in particular would be most appreciated. Cheers, Pete Pollock BJ7 N. California From coudesluijs at chello.nl Tue Mar 7 02:19:33 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Tue, 7 Mar 2017 10:19:33 +0100 Subject: [Healeys] OT: '71 Midget Mk III References: <7e0a31a7-c5b6-dac8-b1aa-d3e540b17035@ix.netcom.com> They are not the prettiest, but they are of very simple construction and easy to restore and repair and all or most parts are available. The engine may be small but can be replaced by a 1275cc engine which is easily tuned. They are as bumpy as a AH100 but if you do not mind that a joy to drive. A perfect car for learning how to deal with a classic car. Kees Oudesluijs Op 7-3-2017 om 7:59 schreef P.M. Pollock: > Listers, > > I'd appreciate any comments about the '71 Midget Mk III my son is > proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- > implies I'm knowledgeable about the other LBCs. > https://redding.craigslist.org/cto/5984510714.html > Anything about the cars in general or this one in particular would be > most appreciated. > > Cheers, > > Pete Pollock > BJ7 > N. California > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From austin.healey at gmail.com Tue Mar 7 04:27:37 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Tue, 7 Mar 2017 22:27:37 +1100 Subject: [Healeys] Headers References: I stand corrected Richard. That's an awesome job with no body mods. Best Chris Sent from my iPhone > On 7 Mar. 2017, at 12:00 pm, richard mayor wrote: > > > ______ From glemon at neb.rr.com Tue Mar 7 06:52:10 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Tue, 7 Mar 2017 13:52:10 +0000 Subject: [Healeys] OT: '71 Midget Mk III It looks and sounds like a nice car at a decent price. As with any old car check for rust or bad rust repairs, rocker panels, floors, bottom of the little area between the front fender and the door. Most parts are cheap and readily available new and used. Check that the front suspension is tight, it can be relatively expensive to fix. Tranny, same thing, non synchro first often gets banged up and chipped, it should whine a little, not a lot. The asking price used to be all the money in the world for a Midget, but they have gone up like everything else. They are a hoot to drive, like a little go kart. I don't know the situation, I don't know if I would want one for my young kids first and only car (let them learn their lessons in a Carolla or something) but as a weekend or fun car they are great. Greg Lemon (first car, 66 Sprite, several others after) > Op 7-3-2017 om 7:59 schreef P.M. Pollock: > > Listers, > > > > I'd appreciate any comments about the '71 Midget Mk III my son is > > proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- > > implies I'm knowledgeable about the other LBCs. > > https://redding.craigslist.org/cto/5984510714.html > > Anything about the cars in general or this one in particular would be > > most appreciated. > > > > Cheers, > > > > Pete Pollock > > BJ7 > > N. California > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/glemon at neb.rr.com > From jdavidso at shaw.ca Tue Mar 7 08:52:21 2017 From: jdavidso at shaw.ca (John Davidson) Date: Tue, 7 Mar 2017 09:52:21 -0600 Subject: [Healeys] Overdrive References: Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Tue Mar 7 09:22:05 2017 From: roggrace at telus.net (Roger Grace) Date: Tue, 7 Mar 2017 08:22:05 -0800 Subject: [Healeys] Overdrive References: lHfwcJerOsVy3lHfxccoeh The operating through shaft is supposed to have about 10 thou end float to stop binding at either end. Perhaps try increasing this a touch as this might be causing it to hang up ? rg From: John Davidson Sent: Tuesday, March 7, 2017 7:52 AM To: 'Fred Wescoe' ; 'healeys' Subject: Re: [Healeys] Overdrive Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------------------------------------------------------------------------- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7998 / Virus Database: 4756/14073 - Release Date: 03/07/17 -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Tue Mar 7 09:35:23 2017 From: roggrace at telus.net (Roger Grace) Date: Tue, 7 Mar 2017 08:35:23 -0800 Subject: [Healeys] Rear Main Drain Pipe I currently have the oil pan off my BJ8 ? to replace the gasket with one of those newer silicon style ones. While scratching around saw that there was a large threaded hole on the rear main. Also one on the front main but smaller diameter. My manual shows a drain pipe there. Is it important ? Do I need to fit one ? Purpose ? Read on another forum that removing it reduces leaks from the rear seal ? What about the front threaded hole ? Manual doesn?t show anything ? Thoughts please. rg -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Tue Mar 7 09:31:18 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Tue, 7 Mar 2017 08:31:18 -0800 Subject: [Healeys] Overdrive References: <007701d2975a$cffdc010$6ff94030$@shaw.ca> Remove the operating rod and check that the very small bleed hole under the check valve isnt plugged. David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com From: John Davidson Sent: Tuesday, March 07, 2017 7:52 AM To: 'Fred Wescoe' ; 'healeys' Subject: Re: [Healeys] Overdrive Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From Ed at wadsworthoneal.com Tue Mar 7 10:41:01 2017 From: Ed at wadsworthoneal.com (Ed O'Neal) Date: Tue, 7 Mar 2017 17:41:01 +0000 Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. From pollpete at ix.netcom.com Tue Mar 7 10:44:30 2017 From: pollpete at ix.netcom.com (P.M. Pollock) Date: Tue, 7 Mar 2017 09:44:30 -0800 Subject: [Healeys] OT: '71 Midget Mk III References: <7e0a31a7-c5b6-dac8-b1aa-d3e540b17035@ix.netcom.com> Thanks folks, I knew the List would come through for us. One aspect I neglected to mention is that our son is long out of the nest and just reaching that station in life where he can think about undertaking the care and feeding of a LBC for fun. (For me it was the reverse: after 15 years companionship with the BJ7 I married a Karmann-Ghia as my second.) Cheers, Pete Pollock BJ7 N. California On 3/6/2017 10:59 PM, P.M. Pollock wrote: > Listers, > > I'd appreciate any comments about the '71 Midget Mk III my son is proposing to > buy. He assumes my BJ7 -sadly inactive for 25 years- implies I'm > knowledgeable about the other LBCs. > https://redding.craigslist.org/cto/5984510714.html > Anything about the cars in general or this one in particular would be most > appreciated. > > Cheers, > > Pete Pollock > BJ7 > N. California > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/pollpete at ix.netcom.com > > -- IMPORTANT - PLEASE NOTE: This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 USC 2510. Its disclosure is strictly limited to the recipient intended by the sender of this message. This communication may contain confidential and privileged material for the sole use of the intended recipient and receipt by anyone other than the intended recipient does not constitute a loss of the confidential or privileged nature of the communication. Any review or distribution by others is strictly prohibited. If you are not the intended recipient please contact the sender by return electronic mail and delete all copies of this communication. From 050.rpl at gmail.com Tue Mar 7 12:25:59 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Tue, 7 Mar 2017 14:25:59 -0500 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Price Lindsay 239-596-8518 (Home) 630-841-6300 (Cell) 050.rpl at gmail.com > On Mar 7, 2017, at 12:41 PM, Ed O'Neal wrote: > > I would like to have some recommendations for a competent distributor rebuilder. > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpaynepbr at cox.net Tue Mar 7 12:34:40 2017 From: jpaynepbr at cox.net (Jonas Payne) Date: Tue, 7 Mar 2017 11:34:40 -0800 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Jeff at Advanced Distributor. They've done a dozen for me and I have been very pleased with the price, lead time and quality of work. Jonas Payne PBR Consulting Services, LLC 702.882.6711 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Ed O'Neal Sent: Tuesday, March 7, 2017 9:41 AM To: healeys at autox.team.net Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/jpaynepbr at cox.net From goldengt at cal.net Tue Mar 7 13:41:15 2017 From: goldengt at cal.net (goldengt) Date: Tue, 07 Mar 2017 12:41:15 -0800 Subject: [Healeys] Repro bj8 window crank and door handle The window crank pivot pin head sticks out too far and tears the door panel. Way different design from the original .The interior door handle mountin pin holes a not as original making the tip of the handle cut the door panel.I can grind the crank pin back but don't have a good solution for the handle.?Ken Freese?65 bj8 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeymanjim at hansencc.net Tue Mar 7 14:05:29 2017 From: healeymanjim at hansencc.net (=?utf-8?Q?healeymanjim?=) Date: Tue, 07 Mar 2017 13:05:29 -0800 Subject: [Healeys] =?utf-8?q?o/d_question?= would a weak relay be the cause of a bj8 overdrive being slow to disengage. it takes 10 to 15 seconds to disengage after switch is turned off. suspected throttle switch but wired around it and it still has same symtoms. TIA From vintage_roadster_restoration at hotmail.com Tue Mar 7 14:51:25 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 7 Mar 2017 21:51:25 +0000 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Ed, The only place I would consider sending a distributor to is Jeff at Advance Distributors in Minnesota. Jean ________________________________ From: Healeys on behalf of Ed O'Neal Sent: March 7, 2017 5:41 PM To: healeys at autox.team.net Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Tue Mar 7 15:33:30 2017 From: boyracer466 at gmail.com (richard mayor) Date: Tue, 7 Mar 2017 14:33:30 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <81beb416-eeaf-6686-7ef3-49a75aa09fd5@chello.nl> Kees, Given the constraints of the Healey engine bay and footwell, I do not think it is possible to achieve exact equal length pipes, then 6 pipes into 3, and so forth as you describe. If it could have been done.... I would have done it. As the pipes are done now, it is like threading a needle to get both sets into the small opening between engine and chassis. The tubes are 1-3/4" so the inside diameter is 1-5/8" which is the same size as the exhaust ports. If anyone has made a set of headers better than these, I would love to see them. And yes the 2 into 1 wye is not every elegant but that is not part of the headers. It was an afterthought and can be discarded. Richard [image: Inline image 1] On Mon, Mar 6, 2017 at 12:01 AM, Oudesluys wrote: > > It is beautifully made but it is a pity the pipes are not equally length > and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 > joint is not correct. The joining pipe of a smaller diameter than the other. > > Kees Oudesluijs > > > > Very nicely fabricated! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > > > You need a good set of headers and I have one for sale. > [image: Inline image 1] > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3844.jpg Type: image/jpeg Size: 2021946 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From eyera3000 at gmail.com Tue Mar 7 21:08:57 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 7 Mar 2017 20:08:57 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <81beb416-eeaf-6686-7ef3-49a75aa09fd5@chello.nl> how much do you want for the header Richard? Easier to sell with a price Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 7, 2017 at 2:33 PM, richard mayor wrote: > Kees, > > Given the constraints of the Healey engine bay and footwell, I do not > think it is possible to achieve exact equal length pipes, then 6 pipes into > 3, and so forth as you describe. If it could have been done.... I would > have done it. As the pipes are done now, it is like threading a needle to > get both sets into the small opening between engine and chassis. The tubes > are 1-3/4" so the inside diameter is 1-5/8" which is the same size as the > exhaust ports. If anyone has made a set of headers better than these, I > would love to see them. And yes the 2 into 1 wye is not every elegant but > that is not part of the headers. It was an afterthought and can be > discarded. > > Richard > > [image: Inline image 1] > > On Mon, Mar 6, 2017 at 12:01 AM, Oudesluys wrote: > >> >> It is beautifully made but it is a pity the pipes are not equally length >> and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 >> joint is not correct. The joining pipe of a smaller diameter than the other. >> >> Kees Oudesluijs >> >> >> >> Very nicely fabricated! >> >> >> >> Bruce Steele >> >> Brea, CA >> >> 1960 BN7 >> >> >> >> *From:* Healeys [mailto:healeys-bounces at autox.team.net >> ] *On Behalf Of *richard mayor >> *Sent:* Friday, March 03, 2017 4:47 PM >> *To:* healeys >> *Subject:* [Healeys] Engine mods - Headers >> >> >> >> You need a good set of headers and I have one for sale. >> [image: Inline image 1] >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/boyracer466 at gmail.com >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3844.jpg Type: image/jpeg Size: 2021946 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From sentenac.rw at gmail.com Tue Mar 7 22:21:09 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Tue, 07 Mar 2017 21:21:09 -0800 Subject: [Healeys] Heat Shields References: <01bf01d295c5$2d734270$8859c750$@roadrunner.com> <15aab61e212-16ba-12753@webstg-a10.mail.aol.com> BCS is my go to supplier for hard to find parts and parts where quality is an issue. In this case, Moss worked hard to come up with a kit that Roger Moment would approve. The only place that BCS can get that kit is from Moss. Moss is closer to me than is BCS and can deliver in 24 - 36 hours while BCS takes a couple of days more. -Roland On Tue, 7 Mar 2017 19:46:43 -0500, you wrote: >I would agree to buying as apposed to making - although I have made them from asbestos panels (very controlled). I would also suggest you get the panel through British Car Specialists - more reliable. Gerry --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From austin.healey at gmail.com Wed Mar 8 05:01:06 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Wed, 8 Mar 2017 23:01:06 +1100 Subject: [Healeys] Repro bj8 window crank and door handle References: Hi Ken, Find some originals on eBay. BJ8 interior door hardware isn't unique to BJ8. Best Chris Sent from my iPhone > On 8 Mar. 2017, at 7:41 am, goldengt wrote: > > The window crank pivot pin head sticks out too far and tears the door panel. Way different design from the original . > The interior door handle mountin pin holes a not as original making the tip of the handle cut the door panel. > I can grind the crank pin back but don't have a good solution for the handle. > Ken Freese > 65 bj8 > > > > Sent from my Verizon, Samsung Galaxy smartphone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Wed Mar 8 09:16:55 2017 From: roggrace at telus.net (Roger Grace) Date: Wed, 8 Mar 2017 08:16:55 -0800 Subject: [Healeys] Trans oil foaming References: hMFGcDhdwDG7qhMFIcAAjy Now heard back from Castrol/BP. Their response is that they do not recommend the use of their non-detergent 30 oil in manual transmissions. Castrol does not recommend our Non-Detergent 30 oil for manual transmission applications, and we believe the foaming was likely caused by some type of contamination, perhaps water in the transmission. Unfortunately Castrol does not offer a manual transmission fluid product in Canada or the US. This phenomenon is still a mystery to me as there certainly was no water in the transmission as had drained it 2x before noticing the foaming. rg From: Olin Brimberry Sent: Friday, February 24, 2017 12:13 PM To: Roger Grace Cc: Healey List Subject: Re: [Healeys] Trans oil foaming Roger, Your post is good timing for me. I just recently replaced my gearbox and installed Shell ND 30wt. After having a reoccurring drip, I thought it would be wise to check the oil this past weekend. I forgot to check the level before I cranked the engine, so I shut it down after it had run for about a minute. Much to my surprise, I noticed a lot of oil foaming on the dipstick. The oil level was just fine, midway between high and low. Always heard oil foaming was a problem to maintaining proper lubrication of the parts. In engines, I understand that foaming can be caused by over filling the crankcase. Hopefully, the level is high enough that the foam is above the rotating gears and bearings. So, I too would be curious what the experts say. I too have the MT90 at hand, but was concerned that the drip would possibly be worse if I switched. Olin K. Brimberry, PE HunterBane Engineering, PLLC 919-803-4274 (office) 919-522-1608 (mobile) On Feb 24, 2017, at 11:18 AM, Roger Grace wrote: I recently had the OD on my BJ8 apart to replace some parts ? bearing/accumulator/gaskets/O rings etc. For a first sort of sacrificial oil fill I decided to use a non detergent Castrol 30 wt oil. Date codes less than 18 months old. Plan was to switch to the expensive Redline MT90 after testing and after a few hundred miles. This 30 WT oil is often recommended by OD experts. I have built an electric variable speed rest rid to be able to test the transmission outside the car. Overdrive worked fine and transmission sounded OK and ran it for about 2 hours to get the temp up (52C on OD case) and hunt for leaks. So far so good. Then after a few days of standing, and 2 minutes of running, I drained the oil (to fix a leak) and was amazed to see that the oil had foamed badly and there were big classic fish eye bubbles on the surface of the oil. Ambient was about 14C. I did note that the oil coming out of the transmission was somewhat foamier than that from the overdrive drain plug. See enclosed pix. After standing overnight the oil looked normal again. What disturbs me is that unless I had drained the oil I would not have been aware of the foaming and put it into service .... Have now replaced with the MT90 that shows no sign of foaming on the dip stick. Wonder if others have any ideas about this weird phenomenon and is it a concern ? rg <20170128_122945.jpg> <20170127_210053.jpg> <20170127_210045.jpg> No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7998 / Virus Database: 4756/14013 - Release Date: 02/24/17 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 9 09:31:03 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 9 Mar 2017 08:31:03 -0800 Subject: [Healeys] Throttle Bushes Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob From eyera3000 at gmail.com Thu Mar 9 10:49:50 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 9 Mar 2017 09:49:50 -0800 Subject: [Healeys] Throttle Bushes References: Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell wrote: > Cross-posting from BCF: > > While getting ready to drop the rebuilt engine into my BJ8, I noticed the > 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible > to get to with the engine installed--was bent. 'Crap,' I thought, 'one more > job to do before I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the List?--because as I > inspected the shaft, I noticed that one of the two brackets was also bent, > and further inspection revealed that the bush on the driver's side was way > sloppy (actually, pretty much gone). A quick check of the Moss catalog > showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered > I'd bought a replacement set--supposedly made of teflon, but they say > 'nylon' on the bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called > BCS to see what they had, and John, their parts guy said they'd work on > BJ8s. So, I did some digging and, although the photo of the instructions > and applications on Moss' web page showed 'though BN7 and BT7,' if you > download the instructions--5 pages!--they've been revised to show they work > on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl cars I > recommend you check these brackets and bushings. They are bronze bonded to > rubber and, although my car has nearly 200K miles, I suspect the life of > these is determined as much/more in years as in miles, as the rubber gets > baked by engine heat. The rubber on my driver's side bush was completely > dry, caked and brittle, and could conceivably have resulted in a stuck > throttle. The instructions are intimidating--5 pages!--but, except for > having to work under the dash, which I hate, the job was pretty > straightforward. I managed to get the shaft reasonably straight, and the > used bracket I got from BCS was in good shape (though, in hindsight, I > probably could have straightened my bent one), so now my Rube > Goldberg-designed throttle works smooth and with no slop. > > Thought I'd pass this along since I hadn't seen this issue discussed > before. I'd long since replaced the rubber/bronze bush on the shaft on the > engine, and should never have to worry about these again. Credit to to Eric > Gruden who designed these bushes, and to Moss for going the extra mile to > provide these, for a reasonable cost (about $13). > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Thu Mar 9 12:50:57 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Thu, 9 Mar 2017 14:50:57 -0500 Subject: [Healeys] Firewall Heat Shield Install Would someone please tell me how to install the heat shield on the firewall with the engine in place? It came out in 4 pieces. Do I come in from the drivers side (lhd), from under the car or??? TIA! Price Lindsay 67 BJ8 Sent from my iPhone From goldengt at cal.net Thu Mar 9 17:27:34 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Thu, 9 Mar 2017 16:27:34 -0800 (PST) Subject: [Healeys] another BJ8 door striker question On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Thu Mar 9 19:37:11 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Thu, 9 Mar 2017 18:37:11 -0800 Subject: [Healeys] Throttle Bushes References: I was going to replace the bushes on my throttle shaft, but saw what Eric had done back in, well, who knows when, and they looked great. So I just stripped and painted the shaft. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 09, 2017 9:50 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Throttle Bushes Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 0219171427b.jpg Type: image/jpeg Size: 81274 bytes Desc: not available URL: From phoenix722 at comcast.net Thu Mar 9 20:44:34 2017 From: phoenix722 at comcast.net (Mike S) Date: Thu, 9 Mar 2017 19:44:34 -0800 Subject: [Healeys] codes Everything is on the web, right? Why can't I find it? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other? Thanks. Mike BJ8 From bspidell at comcast.net Thu Mar 9 21:43:26 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 9 Mar 2017 20:43:26 -0800 Subject: [Healeys] Pump 'Cover' OK gurus, what's the purpose of this, and which cars (#72)? http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 I bought one, hoping it'll muffle the sound and vibration of the pump bolted to the rear bulkhead of my BN2; is this it's purpose in life? TIA, Bob From coudesluijs at chello.nl Fri Mar 10 01:40:27 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 09:40:27 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> That is correct, although it will not help much. The sleeve is the most important item for that purpose and can be made up from scrap materials easily enough, which also allows some experimenting. Kees Oudesluijs Op 10-3-2017 om 5:43 schreef Bob Spidell: > OK gurus, what's the purpose of this, and which cars (#72)? > > http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 > > > I bought one, hoping it'll muffle the sound and vibration of the pump > bolted to the rear bulkhead of my BN2; is this it's purpose in life? > > TIA, > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From per at schoerner.se Fri Mar 10 01:40:32 2017 From: per at schoerner.se (Per Schoerner) Date: Fri, 10 Mar 2017 09:40:32 +0100 Subject: [Healeys] Firewall Heat Shield Install References: <0EAE2C2B-A6C1-44F5-81BD-F3D0FE42C3C7@gmail.com> I did that once, had to split it in the middle IIRC. Per Skickat fr?n min iPhone > 9 mars 2017 kl. 20:50 skrev R. Lindsay <050.rpl at gmail.com>: > > Would someone please tell me how to install the heat shield on the firewall with the engine in place? It came out in 4 pieces. > > Do I come in from the drivers side (lhd), from under the car or??? > > TIA! > > Price Lindsay > 67 BJ8 > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at schoerner.se > From coudesluijs at chello.nl Fri Mar 10 03:09:03 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 11:09:03 +0100 Subject: [Healeys] codes References: See: https://en.wikipedia.org/wiki/Austin-Healey_100#Model_designators They do not refer to any other UK cars. Each make has its own specific codes, like in these modern days, but simpler. Kees Oudesluijs Op 10-3-2017 om 4:44 schreef Mike S: > Everything is on the web, right? Why can't I find it? Anyway, can > someone point me to a website that lists all the British auto codes, > e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they > relate to engine size and body style, but can't find the details. Are > they an Austin system, BMC system, other? Thanks. > > Mike > BJ8 > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From coudesluijs at chello.nl Fri Mar 10 03:10:22 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 11:10:22 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> It also helps to mount the bracket on rubber isolator blocks. Kees Oudesluijs Op 10-3-2017 om 9:40 schreef Oudesluys: > That is correct, although it will not help much. The sleeve is the > most important item for that purpose and can be made up from scrap > materials easily enough, which also allows some experimenting. > Kees Oudesluijs > > > Op 10-3-2017 om 5:43 schreef Bob Spidell: >> OK gurus, what's the purpose of this, and which cars (#72)? >> >> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >> >> >> I bought one, hoping it'll muffle the sound and vibration of the pump >> bolted to the rear bulkhead of my BN2; is this it's purpose in life? >> >> TIA, >> >> Bob >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From bspidell at comcast.net Fri Mar 10 07:58:31 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 06:58:31 -0800 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> What is the 'sleeve?' On 3/10/2017 12:40 AM, Oudesluys wrote: > That is correct, although it will not help much. The sleeve is the > most important item for that purpose and can be made up from scrap > materials easily enough, which also allows some experimenting. > Kees Oudesluijs > > > Op 10-3-2017 om 5:43 schreef Bob Spidell: >> OK gurus, what's the purpose of this, and which cars (#72)? >> >> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >> >> >> I bought one, hoping it'll muffle the sound and vibration of the pump >> bolted to the rear bulkhead of my BN2; is this it's purpose in life? >> >> TIA, >> >> Bob >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > From bspidell at comcast.net Fri Mar 10 08:18:30 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 07:18:30 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> ... and another on the gas pedal shaft--4 total--although that one doesn't suffer as much abuse (that was the 'under the dash' part). Can't speak to your car, Bruce; the instructions show these are suitable for BN7s. Maybe prior to BJ8s they used something different (can't imagine cork would hold up long at all). Mine were rubber/bronze bushings in a metal cup; the nylon/teflon ones still go inside the metal cup. Looking at Bruce's photo, you can see the ends of the cup protruding from either side of the brackets, although I don't see any of the white nylon bushes. Every time I think I've done every possible job on a Healey it proves me wrong. Bob ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a little football in my head. On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: > I don't follow this. Mine were cork in a metal cup not rubber/bronze. > If the engine is out these need to be replaced, two on the cross shaft > and one where the pedal shaft enters the engine bay. > Nice photo.... looks just like my car > > > ------------------------------------------------------------------------ > *From: *"Bruce Steele" > *To: *"i erbs" , "Bob Spidell" > *Cc: *"Healeys" > *Sent: *Thursday, March 9, 2017 8:37:11 PM > *Subject: *Re: [Healeys] Throttle Bushes > > I was going to replace the bushes on my throttle shaft, but saw what > Eric had done back in, well, who knows when, and they looked great. > So I just stripped and painted the shaft. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *i erbs > *Sent:* Thursday, March 09, 2017 9:50 AM > *To:* Bob Spidell > *Cc:* Healeys > *Subject:* Re: [Healeys] Throttle Bushes > > Good catch. They tend to get munged when folks install or remove their > engines, if not as stated heat and time. > > I built a cable throttle set up to bypass the Rube Goldberg set up. I > have promised a wrote up to John Sims for quite some time to add to > his wonderful site. I have been slowly working on it and will soon I > hope get it to him. > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell > Cross-posting from BCF: > > > While getting ready to drop the rebuilt engine into my BJ8, I > noticed the 'throttle relay shaft'--yeah, the one under the > scuttle, all but impossible to get to with the engine > installed--was bent. 'Crap,' I thought, 'one more job to do before > I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the > List?--because as I inspected the shaft, I noticed that one of the > two brackets was also bent, and further inspection revealed that > the bush on the driver's side was way sloppy (actually, pretty > much gone). A quick check of the Moss catalog showed 'N/A' for all > the parts--I'm screwed, I thought. Then, I remembered I'd bought a > replacement set--supposedly made of teflon, but they say 'nylon' > on the bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). > I called BCS to see what they had, and John, their parts guy said > they'd work on BJ8s. So, I did some digging and, although the > photo of the instructions and applications on Moss' web page > showed 'though BN7 and BT7,' if you download the instructions--5 > pages!--they've been revised to show they work on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl > cars I recommend you check these brackets and bushings. They are > bronze bonded to rubber and, although my car has nearly 200K > miles, I suspect the life of these is determined as much/more in > years as in miles, as the rubber gets baked by engine heat. The > rubber on my driver's side bush was completely dry, caked and > brittle, and could conceivably have resulted in a stuck throttle. > The instructions are intimidating--5 pages!--but, except for > having to work under the dash, which I hate, the job was pretty > straightforward. I managed to get the shaft reasonably straight, > and the used bracket I got from BCS was in good shape (though, in > hindsight, I probably could have straightened my bent one), so now > my Rube Goldberg-designed throttle works smooth and with no slop. > > Thought I'd pass this along since I hadn't seen this issue > discussed before. I'd long since replaced the rubber/bronze bush > on the shaft on the engine, and should never have to worry about > these again. Credit to to Eric Gruden who designed these bushes, > and to Moss for going the extra mile to provide these, for a > reasonable cost (about $13). > > Bob > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From coudesluijs at chello.nl Fri Mar 10 08:43:28 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 16:43:28 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> It is actually the cover nr. 72, the earlier shape instead of the later rubber strip that sits between the clamp and the pump body. It is to isolate the pump from the car body to reduce noise. I imagine they replaced the cover to avoid overheating of the pump. The sleeve nr. 70 is a thin rubber ring that is a seal between the pumps coil housing and the Bakelite cover for the points mechanism. I cut the rings from fat bicycle inner tires. When I first looked at the picture (to) quickly I assumed it was the later rubber strip nr.70 as I did not read the explanatory text below the picture. Kees Oudesluijs Op 10-3-2017 om 15:58 schreef Bob Spidell: > What is the 'sleeve?' > > > > On 3/10/2017 12:40 AM, Oudesluys wrote: >> That is correct, although it will not help much. The sleeve is the >> most important item for that purpose and can be made up from scrap >> materials easily enough, which also allows some experimenting. >> Kees Oudesluijs >> >> >> Op 10-3-2017 om 5:43 schreef Bob Spidell: >>> OK gurus, what's the purpose of this, and which cars (#72)? >>> >>> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >>> >>> >>> I bought one, hoping it'll muffle the sound and vibration of the >>> pump bolted to the rear bulkhead of my BN2; is this it's purpose in >>> life? >>> >>> TIA, >>> >>> Bob >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: >>> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >>> >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From healeybruce at roadrunner.com Fri Mar 10 16:56:24 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Fri, 10 Mar 2017 15:56:24 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> That?s because the white nylon bushes got painted cadmium with the rest of the mounts. It clearly looked like Eric had spread the mounts to insert the bushings, then re-crimped them to hold them tightly in place. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Friday, March 10, 2017 7:19 AM Cc: Healeys Subject: Re: [Healeys] Throttle Bushes ... and another on the gas pedal shaft--4 total--although that one doesn't suffer as much abuse (that was the 'under the dash' part). Can't speak to your car, Bruce; the instructions show these are suitable for BN7s. Maybe prior to BJ8s they used something different (can't imagine cork would hold up long at all). Mine were rubber/bronze bushings in a metal cup; the nylon/teflon ones still go inside the metal cup. Looking at Bruce's photo, you can see the ends of the cup protruding from either side of the brackets, although I don't see any of the white nylon bushes. Every time I think I've done every possible job on a Healey it proves me wrong. Bob ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a little football in my head. On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: I don't follow this. Mine were cork in a metal cup not rubber/bronze. If the engine is out these need to be replaced, two on the cross shaft and one where the pedal shaft enters the engine bay. Nice photo.... looks just like my car _____ Sent: Thursday, March 9, 2017 8:37:11 PM Subject: Re: [Healeys] Throttle Bushes I was going to replace the bushes on my throttle shaft, but saw what Eric had done back in, well, who knows when, and they looked great. So I just stripped and painted the shaft. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 09, 2017 9:50 AM Subject: Re: [Healeys] Throttle Bushes Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Mar 10 17:31:57 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 16:31:57 -0800 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> <950ef8ec-f51a-3ccd-5a97-f58b0faf56ad@chello.nl> OK, thanks. Now I can go on to being confused about something else. bs On 3/10/2017 7:43 AM, Oudesluys wrote: > It is actually the cover nr. 72, the earlier shape instead of the > later rubber strip that sits between the clamp and the pump body. It > is to isolate the pump from the car body to reduce noise. I imagine > they replaced the cover to avoid overheating of the pump. > The sleeve nr. 70 is a thin rubber ring that is a seal between the > pumps coil housing and the Bakelite cover for the points mechanism. I > cut the rings from fat bicycle inner tires. When I first looked at the > picture (to) quickly I assumed it was the later rubber strip nr.70 as > I did not read the explanatory text below the picture. > > Kees Oudesluijs > > > Op 10-3-2017 om 15:58 schreef Bob Spidell: >> What is the 'sleeve?' >> >> >> >> On 3/10/2017 12:40 AM, Oudesluys wrote: >>> That is correct, although it will not help much. The sleeve is the >>> most important item for that purpose and can be made up from scrap >>> materials easily enough, which also allows some experimenting. >>> Kees Oudesluijs >>> >>> >>> Op 10-3-2017 om 5:43 schreef Bob Spidell: >>>> OK gurus, what's the purpose of this, and which cars (#72)? >>>> >>>> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >>>> >>>> >>>> I bought one, hoping it'll muffle the sound and vibration of the >>>> pump bolted to the rear bulkhead of my BN2; is this it's purpose in >>>> life? >>>> >>>> TIA, >>>> >>>> Bob >>>> >>>> _______________________________________________ >>>> Support Team.Net http://www.team.net/donate.html >>>> Suggested annual donation $12.75 >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> >>>> Healeys at autox.team.net >>>> http://autox.team.net/mailman/listinfo/healeys >>>> >>>> Unsubscribe/Manage: >>>> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >>>> >>>> >>>> >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: >>> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > From bspidell at comcast.net Fri Mar 10 17:34:29 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 16:34:29 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> <018501d299f9$ed701de0$c85059a0$@roadrunner.com> Damn ... now I have to pull my engine out again to paint the bushes. On 3/10/2017 3:56 PM, Bruce Steele wrote: > > That?s because the white nylon bushes got painted cadmium with the > rest of the mounts. It clearly looked like Eric had spread the mounts > to insert the bushings, then re-crimped them to hold them tightly in > place. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *Bob Spidell > *Sent:* Friday, March 10, 2017 7:19 AM > *Cc:* Healeys > *Subject:* Re: [Healeys] Throttle Bushes > > ... and another on the gas pedal shaft--4 total--although that one > doesn't suffer as much abuse (that was the 'under the dash' part). > Can't speak to your car, Bruce; the instructions show these are > suitable for BN7s. Maybe prior to BJ8s they used something different > (can't imagine cork would hold up long at all). Mine were > rubber/bronze bushings in a metal cup; the nylon/teflon ones still go > inside the metal cup. Looking at Bruce's photo, you can see the ends > of the cup protruding from either side of the brackets, although I > don't see any of the white nylon bushes. > > Every time I think I've done every possible job on a Healey it proves > me wrong. > > Bob > > ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a > little football in my head. > > On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: > > I don't follow this. Mine were cork in a metal cup not > rubber/bronze. If the engine is out these need to be replaced, two > on the cross shaft and one where the pedal shaft enters the engine > bay. > > Nice photo.... looks just like my car > > ------------------------------------------------------------------------ > > *From: *"Bruce Steele" > *Cc: *"Healeys" > *Sent: *Thursday, March 9, 2017 8:37:11 PM > *Subject: *Re: [Healeys] Throttle Bushes > > I was going to replace the bushes on my throttle shaft, but saw > what Eric had done back in, well, who knows when, and they looked > great. So I just stripped and painted the shaft. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf > Of *i erbs > *Sent:* Thursday, March 09, 2017 9:50 AM > *Subject:* Re: [Healeys] Throttle Bushes > > Good catch. They tend to get munged when folks install or remove > their engines, if not as stated heat and time. > > I built a cable throttle set up to bypass the Rube Goldberg set > up. I have promised a wrote up to John Sims for quite some time to > add to his wonderful site. I have been slowly working on it and > will soon I hope get it to him. > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell > Cross-posting from BCF: > > While getting ready to drop the rebuilt engine into my BJ8, I > noticed the 'throttle relay shaft'--yeah, the one under the > scuttle, all but impossible to get to with the engine > installed--was bent. 'Crap,' I thought, 'one more job to do > before I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the > List?--because as I inspected the shaft, I noticed that one of > the two brackets was also bent, and further inspection > revealed that the bush on the driver's side was way sloppy > (actually, pretty much gone). A quick check of the Moss > catalog showed 'N/A' for all the parts--I'm screwed, I > thought. Then, I remembered I'd bought a replacement > set--supposedly made of teflon, but they say 'nylon' on the > bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not > apply). I called BCS to see what they had, and John, their > parts guy said they'd work on BJ8s. So, I did some digging > and, although the photo of the instructions and applications > on Moss' web page showed 'though BN7 and BT7,' if you download > the instructions--5 pages!--they've been revised to show they > work on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl > cars I recommend you check these brackets and bushings. They > are bronze bonded to rubber and, although my car has nearly > 200K miles, I suspect the life of these is determined as > much/more in years as in miles, as the rubber gets baked by > engine heat. The rubber on my driver's side bush was > completely dry, caked and brittle, and could conceivably have > resulted in a stuck throttle. The instructions are > intimidating--5 pages!--but, except for having to work under > the dash, which I hate, the job was pretty straightforward. I > managed to get the shaft reasonably straight, and the used > bracket I got from BCS was in good shape (though, in > hindsight, I probably could have straightened my bent one), so > now my Rube Goldberg-designed throttle works smooth and with > no slop. > > Thought I'd pass this along since I hadn't seen this issue > discussed before. I'd long since replaced the rubber/bronze > bush on the shaft on the engine, and should never have to > worry about these again. Credit to to Eric Gruden who designed > these bushes, and to Moss for going the extra mile to provide > these, for a reasonable cost (about $13). > > Bob > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ghaywood at ec.rr.com Fri Mar 10 18:37:33 2017 From: ghaywood at ec.rr.com (George Haywood) Date: Sat, 11 Mar 2017 1:37:33 +0000 Subject: [Healeys] another BJ8 door striker question Ken, The packing plate goes on the shut face side but they go between the aluminum door finisher and the shut face pillar I'm pretty sure. If I remember correctly I used a few choice expletives while getting the proper alignment and fit. Hope this helps, George Haywood '65 bj8 ---- goldengt at cal.net wrote: > On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. From jstmorris at yahoo.com Sat Mar 11 08:33:13 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 11 Mar 2017 15:33:13 +0000 (UTC) Subject: [Healeys] codes References: Hello Mike;? I am not sure what type of codes you are after - model, engine, chassis, etc.? Attached is a file with chassis codes.? This may help a bit. ?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 10, 2017 2:08 AM, Mike S wrote: Everything is on the web, right?? Why can't I find it?? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)?? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other?? Thanks. Mike BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Chassis-Number-Guide by Hannah Sharp.pdf Type: application/pdf Size: 126824 bytes Desc: not available URL: From ahbn6 at verizon.net Sat Mar 11 09:18:15 2017 From: ahbn6 at verizon.net (John Sims) Date: Sat, 11 Mar 2017 11:18:15 -0500 Subject: [Healeys] codes References: <22340972.3390282.1489246393146@mail.yahoo.com> I can?t find the original layout but: B stands for the engine size. A for the small engine in Sprites (less than 2000cc) and B for the engine in Healeys up to 3000 cc?s or so. Thus the AN, etc. for Sprites since they had a 900 or so cc engine. N stands for two seater although it appeared on the BN4 which was a ?occasional? four seater (if you had stubby legs you could fit) T for four seater J for true convertible with the top permanently fastened L is for left hand drive If there is an ?O? it stands for equipped with overdrive but this was omitted on most cars as most had standard OD. So, BN6 was a large engine two seater and the 6th model in the series. BJ8 was a large engine car with a permanent folding top and the 8th model in the series. BJ9 is my Kia Sedona. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of J. Scott Morris Sent: Saturday, March 11, 2017 10:33 AM To: Mike S; Healey List Subject: Re: [Healeys] codes Hello Mike; I am not sure what type of codes you are after - model, engine, chassis, etc. Attached is a file with chassis codes. This may help a bit. --Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 10, 2017 2:08 AM, Mike S wrote: Everything is on the web, right? Why can't I find it? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other? Thanks. Mike BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Sat Mar 11 10:26:13 2017 From: phoenix722 at comcast.net (Mike S) Date: Sat, 11 Mar 2017 09:26:13 -0800 Subject: [Healeys] codes References: <22340972.3390282.1489246393146@mail.yahoo.com> Thanks to all. Mike From bjcap at optonline.net Sat Mar 11 13:18:44 2017 From: bjcap at optonline.net (carroll phillips) Date: Sat, 11 Mar 2017 15:18:44 -0500 (EST) Subject: [Healeys] Throttle bushes References: I just remove the old rubber and use a windshield type medium hard when cured caulk (think butyl rubber) and redo the original cups and bushes. Looks exactly as original and does the same job as original Carroll From rjhco at att.net Sat Mar 11 13:42:28 2017 From: rjhco at att.net (Richard J. Hockert) Date: Sat, 11 Mar 2017 14:42:28 -0600 Subject: [Healeys] New Pistons and cam for sale I have a new set of full race JE Pistons that I do not need. They are 84.5mm (3.327 Inches), the maximum allowable to remain under 3 liters. Paid to have them custom made, with new pins (with spiro locks), thin rings, tuff coat on skirt and thermal barrier coating on the crown. Also had the crown undercut. Paid almost $1200 delivered. Will sell at discount and take small loss. Have pictures and invoice for serious inquiry. Also, have a Liege cam with bucket followers that is extra to my use (bucket followers require longer push rods). Will sell for fair offer. Best cam factory ever developed. Grind was used in Liege-Rome-Liege rally 1963, then, so good, used at Sebring 1965. Going to eBay next week - list first choice. Contact off list please. Thanks, Jim From sbyers at ec.rr.com Sat Mar 11 14:43:33 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sat, 11 Mar 2017 16:43:33 -0500 Subject: [Healeys] Throttle bushes References: <5d981c13.58bbd.15abf05fbe3.Webtop.32@optonline.net> I think I used liquid silicone rubber when I repaired my throttle rod assembly in 1999. I inserted the bronze bushings into the cups, filled the cups with the silicone, then inserted the rod to ensure that the bushings would be in alignment when the silicone cured. I have had no reason to remove the repaired assembly since then but the silicone seems to be doing fine so far. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of carroll phillips Sent: Saturday, March 11, 2017 3:19 PM To: healeys at autox.team.net Subject: Re: [Healeys] Throttle bushes I just remove the old rubber and use a windshield type medium hard when cured caulk (think butyl rubber) and redo the original cups and bushes. Looks exactly as original and does the same job as original Carroll _______________________________________________ $12.75 Archive: http://www.team.net/archive --- This email has been checked for viruses by AVG. http://www.avg.com From goldengt at cal.net Sat Mar 11 18:25:54 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Sat, 11 Mar 2017 17:25:54 -0800 (PST) Subject: [Healeys] BJ8 door latch done References: <20170311013733.6N4QK.33112.root@cdptpa-web09> I tried a combination of original latch plate and new striker plate without the packing plate and that worked very nicely so I left well enough alone. The welded original latch turned out well.If I want the new latch plate, I am sure I would need the packing plate also for a start. ----- Original Message ----- From: George Haywood To: goldengt at cal.net Cc: healey list Sent: Fri, 10 Mar 2017 17:37:33 -0800 (PST) Subject: Re: [Healeys] another BJ8 door striker question Ken, The packing plate goes on the shut face side but they go between the aluminum door finisher and the shut face pillar I'm pretty sure. If I remember correctly I used a few choice expletives while getting the proper alignment and fit. Hope this helps, George Haywood '65 bj8 ---- goldengt at cal.net wrote: > On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Sat Mar 11 20:50:10 2017 From: healeyrik at gmail.com (HealeyRick) Date: Sat, 11 Mar 2017 22:50:10 -0500 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Sat Mar 11 22:17:12 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sat, 11 Mar 2017 21:17:12 -0800 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Saturday, March 11, 2017 7:50 PM To: healeys at autox.team.net Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville -------------- next part -------------- An HTML attachment was scrubbed... URL: From tomfelts at windstream.net Sun Mar 12 06:01:24 2017 From: tomfelts at windstream.net (Tom Felts) Date: Sun, 12 Mar 2017 8:01:24 -0400 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. tom ---- Bruce Steele wrote: ============= He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Saturday, March 11, 2017 7:50 PM To: healeys at autox.team.net Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville From dayton21 at comcast.net Sun Mar 12 06:57:32 2017 From: dayton21 at comcast.net (dayton21 at comcast.net) Date: Sun, 12 Mar 2017 08:57:32 -0400 Subject: [Healeys] Skip Saunders....? Anyone have a current email for Skip Saunders? tfsbj7 at mindspring.com ;????.is no good Mitchell Sent from Mail for Windows 10 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sun Mar 12 09:51:05 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 12 Mar 2017 16:51:05 +0100 (CET) Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: <020001d29aef$e879bfc0$b96d3f40$@roadrunner.com> <20170312080124.9CC6L.20389.root@pamxwww08-z01> Jerry only sold his last Healey three years ago; maybe the 'Healey regret' hasn't set in yet. Wonder if he'll be one of the people that come up to me at gas stations, hotels and restaurants and says: "I used to have one of those; wish I still had it..." My BFF bought a 'rod a few years ago; all he did with it is take it to car shows and toodle around town. He got bored with it (and his wife wouldn't ride in it). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 12, 2017 at 1:01 PM Tom Felts wrote: > > > Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. > > tom > ---- Bruce Steele wrote: > > ============= > He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick > Sent: Saturday, March 11, 2017 7:50 PM > To: healeys at autox.team.net > Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? > > > > Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ > > > > Rick Neville From healeybruce at roadrunner.com Sun Mar 12 22:16:14 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 12 Mar 2017 21:16:14 -0700 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: <020001d29aef$e879bfc0$b96d3f40$@roadrunner.com> <20170312080124.9CC6L.20389.root@pamxwww08-z01> <1029887373.1539006.1489333866925@connect.xfinity.com> Well, my wife doesn't ride in the Healey, but I always figured it was her loss. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Sunday, March 12, 2017 8:51 AM To: healeys at autox.team.net Subject: Re: [Healeys] Has Jerry Wall Gone to the Dark Side? Jerry only sold his last Healey three years ago; maybe the 'Healey regret' hasn't set in yet. Wonder if he'll be one of the people that come up to me at gas stations, hotels and restaurants and says: "I used to have one of those; wish I still had it..." My BFF bought a 'rod a few years ago; all he did with it is take it to car shows and toodle around town. He got bored with it (and his wife wouldn't ride in it). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 12, 2017 at 1:01 PM Tom Felts wrote: > > > Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. > > tom > ---- Bruce Steele wrote: > > ============= > He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > HealeyRick > Sent: Saturday, March 11, 2017 7:50 PM > To: healeys at autox.team.net > Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? > > > > Healey guy goes back to street rodding: > http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff > -back-street-rodding/ > > > > Rick Neville _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From goldengt at cal.net Mon Mar 13 16:07:08 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Mon, 13 Mar 2017 15:07:08 -0700 (PDT) Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks.For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut.Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Mon Mar 13 17:04:53 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Mon, 13 Mar 2017 16:04:53 -0700 Subject: [Healeys] VHT primer and paint Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I've read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Mon Mar 13 18:31:07 2017 From: jdavidso at shaw.ca (John Davidson) Date: Mon, 13 Mar 2017 19:31:07 -0500 Subject: [Healeys] drive BN2 without safety gage References: <1113900580.2411000.1489442828548.JavaMail.zimbra@cal.net> While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Mon Mar 13 18:52:43 2017 From: jdavidso at shaw.ca (John Davidson) Date: Mon, 13 Mar 2017 19:52:43 -0500 Subject: [Healeys] drive BN2 without safety gage References: <1113900580.2411000.1489442828548.JavaMail.zimbra@cal.net> While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Mon Mar 13 22:39:19 2017 From: goldengt at cal.net (goldengt) Date: Mon, 13 Mar 2017 21:39:19 -0700 Subject: [Healeys] drive BN2 without safety gage Sure. ?Thatis the best way but he has already shipped his gages to the rebuilder.Ken? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: John Davidson Date: 3/13/17 5:52 PM (GMT-08:00) To: goldengt at cal.net, 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go.?Again, not knowing the reason for not installing the gauges; just my 2 cents worth.?John R Davidson, P. Eng.H (204) 895-4523, C (204) 295-9207?From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage?My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks.For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut.Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Mon Mar 13 22:50:28 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Mon, 13 Mar 2017 21:50:28 -0700 Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> Follow-up question-what's the list's experience with various high temp exhaust paints? Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bruce Steele Sent: Monday, March 13, 2017 4:05 PM To: 'Healey List' Subject: [Healeys] VHT primer and paint Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I've read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Tue Mar 14 05:53:04 2017 From: jdavidso at shaw.ca (John Davidson) Date: Tue, 14 Mar 2017 06:53:04 -0500 Subject: [Healeys] drive BN2 without safety gage References: And now I know. The radiator fitting thread I believe to be BSP (British Standard Pipe) and is not easily found in North America. And the radiator is pressurized to 7 psi normally. I have no further suggestions for the temperature gauge. Sorry John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: goldengt [mailto:goldengt at cal.net] Sent: March-13-17 11:39 PM To: John Davidson ; 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage Sure. Thatis the best way but he has already shipped his gages to the rebuilder. Ken Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: John Davidson Date: 3/13/17 5:52 PM (GMT-08:00) To: goldengt at cal.net, 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From einhornlawoffice at gmail.com Tue Mar 14 07:17:44 2017 From: einhornlawoffice at gmail.com (Jonathan Einhorn) Date: Tue, 14 Mar 2017 09:17:44 -0400 Subject: [Healeys] Dashboards 100-4 and 100-6 How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. thanks jon -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 07:44:21 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 14:44:21 +0100 (CET) Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> No, but I've had very satisfactory results with DEI High-Temp Silicone Coating. It's outlasted the BBQ paint I tried. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 12:04 AM Bruce Steele wrote: > > > Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I?ve read some positive comments on line. Available at AutoZone, among others. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 07:54:20 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 14:54:20 +0100 (CET) Subject: [Healeys] drive BN2 without safety gage References: <000601d29cb9$8c406940$a4c13bc0$@shaw.ca> If he can't find a suitable bolt or plug I think a laboratory grade rubber stopper would work if you 'screw' it in. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 12:53 PM John Davidson wrote: > > > And now I know. The radiator fitting thread I believe to be BSP (British Standard Pipe) and is not easily found in North America. And the radiator is pressurized to 7 psi normally. I have no further suggestions for the temperature gauge. Sorry > > > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > > > From: goldengt [mailto:goldengt at cal.net] > Sent: March-13-17 11:39 PM > To: John Davidson ; 'healey list' > Subject: RE: [Healeys] drive BN2 without safety gage > > > > Sure. Thatis the best way but he has already shipped his gages to the rebuilder. > > Ken > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: John Davidson > > Date: 3/13/17 5:52 PM (GMT-08:00) > > To: goldengt at cal.net, 'healey list' > > Subject: RE: [Healeys] drive BN2 without safety gage > > > > While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. > > > > Again, not knowing the reason for not installing the gauges; just my 2 cents worth. > > > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net > Sent: March-13-17 5:07 PM > To: healey list > Subject: [Healeys] drive BN2 without safety gage > > > > My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. > > For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. > > Ken Freese > > 65 BJ8 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 08:24:08 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 15:24:08 +0100 (CET) Subject: [Healeys] Dashboards 100-4 and 100-6 References: Good question! I don't know the difference, but if you advertise it as a '100M Fascia' you'll get three times as much for it. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 2:17 PM Jonathan Einhorn wrote: > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 > einhornlawoffice at gmail.com mailto:einhornlawoffice at gmail.com > fax: 203-782-1721 > cell: 203-623-7373 > _______________________________________________ > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Tue Mar 14 09:17:02 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Tue, 14 Mar 2017 08:17:02 -0700 Subject: [Healeys] Dashboards 100-4 and 100-6 References: The 6 cylinder cars have a hole in the dash for the steering column to come thru and the 4 cylinder cars have a upside down U f or the column. David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com From: Jonathan Einhorn Sent: Tuesday, March 14, 2017 6:17 AM To: healey list Subject: [Healeys] Dashboards 100-4 and 100-6 How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. thanks jon -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 14 09:48:17 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 14 Mar 2017 11:48:17 -0400 Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> <1176350408.1615591.1489499061959@connect.xfinity.com> I installed a new stainless steel exhaust system in my BJ8 in 1986 and painted it before installation with Plasti-Kote Universal #203 Black engine paint. No need to repaint since then. I painted only the pipes and mufflers, not the exhaust manifold. I did not use a separate primer. Recently I repainted the engine in my MG Midget with VHT gray engine primer and black topcoat because that was what is available now locally, but I have not yet reinstalled the engine so I can't comment on its durability. The can says it is good to 550 deg. F (288 C). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Tuesday, March 14, 2017 9:44 AM To: Healey List; Bruce Steele Subject: Re: [Healeys] VHT primer and paint No, but I've had very satisfactory results with DEI High-Temp Silicone Coating. It's outlasted the BBQ paint I tried. Bob -------------------------------- Bob Spidell - San Jose, CA On March 14, 2017 at 12:04 AM Bruce Steele wrote: Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I?ve read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 14 10:39:34 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 14 Mar 2017 09:39:34 -0700 Subject: [Healeys] Dashboards 100-4 and 100-6 References: <1566F0DEE7494744914C2B1464ABB966@DavidNockHP> 4 cyl [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 14, 2017 at 8:17 AM, David Nock BCS wrote: > The 6 cylinder cars have a hole in the dash for the steering column to > come thru and the 4 cylinder cars have a upside down U f or the column. > > David Nock > British Car Specialists > 209-948-8767 <(209)%20948-8767> > www.britishcarspecialists.com > > *From:* Jonathan Einhorn > *Sent:* Tuesday, March 14, 2017 6:17 AM > *To:* healey list > *Subject:* [Healeys] Dashboards 100-4 and 100-6 > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. > Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 <(203)%20777-3777> > einhornlawoffice at gmail.com > fax: 203-782-1721 <(203)%20782-1721> > cell: 203-623-7373 <(203)%20623-7373> > > ------------------------------ > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at sbcglobal.net > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 118888 bytes Desc: not available URL: From waschu2 at gmail.com Tue Mar 14 12:03:17 2017 From: waschu2 at gmail.com (Wayne Schultz) Date: Tue, 14 Mar 2017 14:03:17 -0400 Subject: [Healeys] Healey phase 2 rear end serial number range I am trying to date a couple late BJ-8 rear end housings by their serial numbers. Does anyone have that information from 1965 to 1967? I understand that not all housings had serial numbers. Thanks Wayne -------------- next part -------------- An HTML attachment was scrubbed... URL: From kentmclean at comcast.net Tue Mar 14 15:00:59 2017 From: kentmclean at comcast.net (Kent McLean) Date: Tue, 14 Mar 2017 17:00:59 -0400 Subject: [Healeys] Banshee on Healey chassis Barn Finds has and interesting story about a FiberFab Banshee for sale. http://barnfinds.com/can-hear-wail-1966-fiberfab-banshee/ It is on a ?60s? Austin-Healey chassis, with a 2.3L Ford engine and automatic transmission. That combo sounds a lot less exciting than the promise of the Banshee in this picture: http://www.mgexp.com/phile/1/210116/Fiberfab_banshee_corvette.jpg ebay link here: http://www.ebay.com/itm/172573110399 - Kent McLean ?56 100 BN2 From sbyers at ec.rr.com Tue Mar 14 15:10:45 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 14 Mar 2017 17:10:45 -0400 Subject: [Healeys] Healey phase 2 rear end serial number range References: Wayne, I'm surprised you didn't check with the BJ8 Registry first. The BMIHT certificates sometimes give the rear axle number, but there are apparently long strings of cars in their records for which no rear axle number was recorded and are therefore not on the certificate. And you are correct that some axle housings apparently have no serial number (mine doesn't). The BJ8 Registry now has data, records, and ownership history for almost exactly 50% of the total BJ8 production (8,853 of 17,712), including copies of certificates for 935 chassis numbers (plus BMIHT data for several thousand more for which no certificate is available). There are 1,247 rear axle numbers identified to the chassis number currently in the registry. Rear axle numbers for very early BJ8s were generally much higher than later ones and could vary widely in sequence with the chassis number (e.g., chassis 25317 had rear axle 23564, chassis 25507 had rear axle 28736; but chassis 26898 had rear axle 505). Later cars seem to have a more reliable pattern to the numbers. What are the serial numbers you are interested in? Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Wayne Schultz Sent: Tuesday, March 14, 2017 2:03 PM To: healeys at autox.team.net Subject: [Healeys] Healey phase 2 rear end serial number range I am trying to date a couple late BJ-8 rear end housings by their serial numbers. Does anyone have that information from 1965 to 1967? I understand that not all housings had serial numbers. Thanks Wayne Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From einhornlawoffice at gmail.com Tue Mar 14 15:16:39 2017 From: einhornlawoffice at gmail.com (Jonathan Einhorn) Date: Tue, 14 Mar 2017 17:16:39 -0400 Subject: [Healeys] Dashboards 100-4 and 100-6 References: <1566F0DEE7494744914C2B1464ABB966@DavidNockHP> Thanks: another part of the Healey Education. Mine (I have two), are from a 100-4. jon On Tue, Mar 14, 2017 at 11:17 AM, David Nock BCS wrote: > The 6 cylinder cars have a hole in the dash for the steering column to > come thru and the 4 cylinder cars have a upside down U f or the column. > > David Nock > British Car Specialists > 209-948-8767 <(209)%20948-8767> > www.britishcarspecialists.com > > *From:* Jonathan Einhorn > *Sent:* Tuesday, March 14, 2017 6:17 AM > *To:* healey list > *Subject:* [Healeys] Dashboards 100-4 and 100-6 > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. > Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 <(203)%20777-3777> > einhornlawoffice at gmail.com > fax: 203-782-1721 <(203)%20782-1721> > cell: 203-623-7373 <(203)%20623-7373> > > ------------------------------ > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at sbcglobal.net > > -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyguy at aol.com Tue Mar 14 17:18:26 2017 From: healeyguy at aol.com (Perry) Date: Tue, 14 Mar 2017 19:18:26 -0400 Subject: [Healeys] Banshee on Healey chassis References: <9D748855-25CC-4119-A6D8-44E037553ACD@comcast.net> Since you mentioned Fiberfab, I have a complete Jamaican Fiberfab body including the glass that was mounted on a Healey chassis. It was in primer and driven s few times before the previous owner decided to sell off the AH chassis and mechanicals. If someone is really interested send me an email to discuss. They sold for about a $1000 In the late 60's. That's $6900 US today. Should be worth a few laughs! Perry Sent from my iPhone > On Mar 14, 2017, at 5:00 PM, Kent McLean wrote: > > Barn Finds has and interesting story about a FiberFab Banshee for sale. > > http://barnfinds.com/can-hear-wail-1966-fiberfab-banshee/ > > It is on a ?60s? Austin-Healey chassis, with a 2.3L Ford engine and automatic transmission. That combo sounds a lot less exciting than the promise of the Banshee in this picture: > http://www.mgexp.com/phile/1/210116/Fiberfab_banshee_corvette.jpg > > ebay link here: > http://www.ebay.com/itm/172573110399 > > - > Kent McLean > ?56 100 BN2 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyguy at aol.com > From bspidell at comcast.net Wed Mar 15 13:16:12 2017 From: bspidell at comcast.net (Bob Spidell) Date: Wed, 15 Mar 2017 12:16:12 -0700 Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend. At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot. AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob From goldengt at cal.net Wed Mar 15 14:00:37 2017 From: goldengt at cal.net (goldengt) Date: Wed, 15 Mar 2017 13:00:37 -0700 Subject: [Healeys] Starter Worked ok when I had 175 psi.Ken Freese?65BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Bob Spidell Date: 3/15/17 12:16 PM (GMT-08:00) To: Healeys Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend.? At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot.? AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression?? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Wed Mar 15 14:28:24 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Wed, 15 Mar 2017 13:28:24 -0700 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> We have both the original style rebuilt starters and the gear reduction starters available David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com -----Original Message----- From: Bob Spidell Sent: Wednesday, March 15, 2017 12:16 PM To: Healeys Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend. At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot. AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net From coudesluijs at chello.nl Wed Mar 15 16:41:30 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Wed, 15 Mar 2017 23:41:30 +0100 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs Op 15-3-2017 om 20:16 schreef Bob Spidell: > Finally got my rebuilt engine in my BJ8 and started this weekend. At > first, it ran rough and backfired, but we spotted a secondary ignition > lead shorting out--which probably caused the backfiring--and the > timing was inexplicably set way retarded and once that was corrected > it runs like the proverbial Swiss watch. Based on my scientific > analysis--feeling the exhaust pulses at the tailpipe--this engine is > making big bangs so the compression should be excellent (I'm hoping > for 160psi on all 6 or better). But--there's always a 'but'--my > starter seems to have become impotent as far as cranking the engine > when (both are) hot. AFAIK the starter is original and not rebuilt > and has nearly 200K miles on it so a rebuild is likely in order but > are our old Lucas starters up to motivating a fresh engine with good > compression? I really don't want to go with a gear reduction starter, > but if the old Lucas whiffs what else can I do? > > TIA, > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From jmsdarch at sbcglobal.net Wed Mar 15 22:11:21 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Wed, 15 Mar 2017 21:11:21 -0700 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> The auto electric shop I deal with does not recommend turning the commutator because, at the age of our cars, the copper is very fragile. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys Sent: Wednesday, March 15, 2017 3:42 PM To: healeys at autox.team.net Subject: Re: [Healeys] Starter The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs From rrengineer.mike at att.net Wed Mar 15 23:05:25 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Thu, 16 Mar 2017 05:05:25 +0000 (UTC) Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> <000101d29e0b$5f01fb80$1d05f280$@sbcglobal.net> I just had the starter and generator rebuilt at a shop that has been in business since the sixties. ?They turned the commutator on the generator and filed down the material ber ween the copper blades. ?They did not have the brushes in stock, so the cut a pair that were close. ?It was CP Generator in Rialto here in SoCal.Mike MacLean Sent from Yahoo Mail on Android On Wed, Mar 15, 2017 at 9:35 PM, John Spaur wrote: The auto electric shop I deal with does not recommend turning the commutator because, at the age of our cars, the copper is very fragile. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys Sent: Wednesday, March 15, 2017 3:42 PM To: healeys at autox.team.net Subject: Re: [Healeys] Starter The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From coudesluijs at chello.nl Thu Mar 16 01:33:53 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Thu, 16 Mar 2017 08:33:53 +0100 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> <000101d29e0b$5f01fb80$1d05f280$@sbcglobal.net> No problem at all. I have done it many times on much older cars. Be gentle and take very small and fine cuts with a very sharp tool at high speed and undercut the insulation properly, i.e. not more than 0,5mm. Kees Oudesluijs Op 16-3-2017 om 5:11 schreef John Spaur: > The auto electric shop I deal with does not recommend turning the commutator > because, at the age of our cars, the copper is very fragile. > John Spaur > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys > Sent: Wednesday, March 15, 2017 3:42 PM > To: healeys at autox.team.net > Subject: Re: [Healeys] Starter > > The starter is powerful enough. A proper rebuild is all it needs. A good > clean of the commutator on a lathe and new brushes should bring back the > strength. Also new bearings will help. > Kees Oudesluijs > > > > > From phoenix722 at comcast.net Thu Mar 16 17:22:56 2017 From: phoenix722 at comcast.net (Mike S) Date: Thu, 16 Mar 2017 16:22:56 -0700 Subject: [Healeys] drive BN2 without safety gage References: <000601d29cb9$8c406940$a4c13bc0$@shaw.ca> You might try a motorcycle shop for british threads. Mike BJ8 On 3/14/2017 4:53 AM, John Davidson wrote: > > And now I know. The radiator fitting thread I believe to be BSP > (British Standard Pipe) and is not easily found in North America. And > the radiator is pressurized to 7 psi normally. I have no further > suggestions for the temperature gauge. Sorry > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > *From:*goldengt [mailto:goldengt at cal.net] > *Sent:* March-13-17 11:39 PM > *To:* John Davidson ; 'healey list' > > *Subject:* RE: [Healeys] drive BN2 without safety gage > > Sure. Thatis the best way but he has already shipped his gages to the > rebuilder. > > Ken > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > > From: John Davidson > > Date: 3/13/17 5:52 PM (GMT-08:00) > > To: goldengt at cal.net, 'healey list' > > Subject: RE: [Healeys] drive BN2 without safety gage > > While not knowing the background reasons for not installing the > gauges, I would strongly recommend temporarily installing the oil > pressure and water temp. Lay a cloth or suitable non-scratch material > over the cowl in front of the windshield, tape done (or otherwise hold > from sliding) and tape the gauges down onto it. Connect the gauges > into the engine and radiator. Support the hood on a block of rubber or > wood to allow the piping to exit the engine bay and you should be good > to go. This is faster and less risk than a jury rigged plug letting go > unexpectedly or worse yet, without knowing that it has let go. > > Again, not knowing the reason for not installing the gauges; just my 2 > cents worth. > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *goldengt at cal.net > *Sent:* March-13-17 5:07 PM > *To:* healey list > *Subject:* [Healeys] drive BN2 without safety gage > > My friend needs to drive his BN2 to my house without his gages > installed. I could tell him to use a bolt for the radiator, but I > don't know what size to tell him, I thought it might be non standard. > Would someone tell me, thanks. > > For the oil, he remove the hose from the block and replace with a > upside down screw head and a nut like the steering box olive nut. > > Ken Freese > > 65 BJ8 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmags at cox.net Thu Mar 16 18:27:08 2017 From: fmags at cox.net (Frank Magnusson) Date: Thu, 16 Mar 2017 19:27:08 -0500 Subject: [Healeys] Starter Hi Bob, I had the exact same problem on my BJ8. When hot (like stopping for,gas....) it would not turn over at all. Cold it worked fine. Just needs a rebuild. Incidentally, I did have mine rebuilt locally and no difference, so whatever they did it obviously wasnt right. I got a rebuilt starter from one of the major Healey suppliers and problem fixed. Frank Sent from my iPad From bspidell at comcast.net Thu Mar 16 20:23:02 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 16 Mar 2017 19:23:02 -0700 Subject: [Healeys] Throttle Springs I carelessly overstretched my old throttle return springs--2 of them on my BJ8--removing them before rebuild but thought 'No big deal; they're only a couple bucks apiece.' So I bought new ones, installed them, and the resistance in the gas pedal is so light I'm not sure the car (BJ8) will be as driveable; i.e. the pedal 'touch' may be too sensitive. Since I replaced seriously worn throttle shaft bushes with teflon/nylon, the change may be due to that--I'm just used to pushing harder on a worn out mechanism--or, possibly, the repo springs are weaker (they DO look a little wimpier). I haven't driven the car yet--maybe I'll prefer a lighter pedal--but has anyone else bought new springs and thought they weren't as, er, springy as the originals? Bob From thehartnetts at earthlink.net Thu Mar 16 23:04:24 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Thu, 16 Mar 2017 22:04:24 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November 1966. Delivered (dispatched) 16 Mar 1967.. Running strong as ever with 214,691 miles on the odo. Birthday present: gets to participate in the St. Patrick's Day parade in Old Sacramento on Saturday. Will be joining eleven other cars from the United British Sports Car Club. (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Birthday 2 Ani.gif Type: image/gif Size: 4677 bytes Desc: not available URL: From austinhealeyslist at gmail.com Fri Mar 17 00:01:45 2017 From: austinhealeyslist at gmail.com (A H List) Date: Fri, 17 Mar 2017 19:01:45 +1300 Subject: [Healeys] Starter References: <8E419F80-0888-479F-8BCE-D073C9FEB4A5@cox.net> The one thing that makes a world of difference to the cranking speed is undercutting the insulation on the commutator. The Lucas instructions forbid it big letters but hey, like those brake caliper bolts which we must never undo, there is no good reason not to and there are significant benefits to doing so. Apparently the insulation between the segments is supposed to wear down faster than the copper but in reality it doesn't and creates a high resistance which equals slow or no cranking when hot. On 3/17/17, Frank Magnusson wrote: > Hi Bob, > > I had the exact same problem on my BJ8. When hot (like stopping > for,gas....) it would not turn over at all. Cold it worked fine. Just > needs a rebuild. Incidentally, I did have mine rebuilt locally and no > difference, so whatever they did it obviously wasnt right. I got a rebuilt > starter from one of the major Healey suppliers and problem fixed. > > Frank > > Sent from my iPad > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/austinhealeyslist at gmail.com > > From bspidell at comcast.net Fri Mar 17 08:38:19 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 07:38:19 -0700 Subject: [Healeys] Petroflex Fuel Line The new flexible rubber/stainless wrap fuel line I recently purchased is a bit shorter than the previous one, but still too long to route from the hard line to the front carb without a large 'S turn.' Can these be safely--and 'cleanly'--cut or otherwise shortened without damaging them? I'm thinking: a) measure twice, b) wrap the point of the cut with masking tape, c) cut (once) with air cutoff tool or ?. Anyone done this? The old line, also Petroflex, while a bit less flexible than the new one, was in good enough shape to keep using, but I figured overhaul time was a good time to replace all rubber components. Also, the jet diaphragms in my HD8s were likewise stiffer than new ones, and showed some minute cracks, but were otherwise serviceable. Both components have at least 20 years and 70-80K miles of service, on mostly California--i.e. ethanol spiked--gas. The radiator hoses were like new and could have been reused as well. Bob From bspidell at comcast.net Fri Mar 17 10:59:26 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 09:59:26 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 References: Len, Looks like our cars 'graduated' from the same class. My car, number 38652, was conceived '12 October - 1 November 1966' and 'despatched' (sic) 15 November 1966. But, my car's a slacker: only 195K miles (give-or-take). Bob On 3/16/2017 10:04 PM, Len and/or Marge Hartnett wrote: > Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November > 1966. > Delivered (dispatched) 16 Mar 1967.. Running strong as ever with > 214,691 miles on the odo. Birthday present: gets to participate in > the St. Patrick's Day parade in Old Sacramento on Saturday. Will be > joining eleven other cars from the United British Sports Car Club. > (The Other) Len > Fairfield, CA, USA > 1967 AH 3000 MkIII, HBJ8L39031 > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4677 bytes Desc: not available URL: From michaelsalter at gmail.com Fri Mar 17 11:28:08 2017 From: michaelsalter at gmail.com (Michael Salter) Date: Fri, 17 Mar 2017 13:28:08 -0400 Subject: [Healeys] Handbook Supplement ?We have been writing a supplement for the Concours Guidelines and are looking for some good scans or photographs of the following publication. *Oct, 1956, Pub # 1434 - "Austin-Healey "100 - SIX" PRELIMINARY MAINTENANCE INSTRUCTIONS" - this is a 6 page hardback folder* Anyone on the list who could help with that? Michael S Technical Chairman*? *Big Healeys Concours Guidelines Committee -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Fri Mar 17 11:32:31 2017 From: phoenix722 at comcast.net (Mike S) Date: Fri, 17 Mar 2017 10:32:31 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 References: <74a9c23c-59db-de47-ca2c-e00046d5b958@comcast.net> Happy birthday 'ol 39031. I will attach a picture of my previous AH, born in 1956. The picture is from 1968, with my son, Jon, who turns 50 today (17th). On 3/17/2017 9:59 AM, Bob Spidell wrote: > > Len, > > Looks like our cars 'graduated' from the same class. My car, number > 38652, was conceived '12 October - 1 November 1966' and 'despatched' > (sic) 15 November 1966. > > But, my car's a slacker: only 195K miles (give-or-take). > > Bob > > > On 3/16/2017 10:04 PM, Len and/or Marge Hartnett wrote: >> Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November >> 1966. >> Delivered (dispatched) 16 Mar 1967.. Running strong as ever with >> 214,691 miles on the odo. Birthday present: gets to participate in >> the St. Patrick's Day parade in Old Sacramento on Saturday. Will be >> joining eleven other cars from the United British Sports Car Club. >> (The Other) Len >> Fairfield, CA, USA >> 1967 AH 3000 MkIII, HBJ8L39031 >> >> >> _______________________________________________ >> Support Team.Nethttp://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive:http://www.team.net/archive >> Forums:http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4677 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: AH 100M with Jon, Oct 1968.jpg Type: image/jpeg Size: 2372340 bytes Desc: not available URL: From austinhealeyslist at gmail.com Fri Mar 17 15:19:25 2017 From: austinhealeyslist at gmail.com (A H List) Date: Sat, 18 Mar 2017 10:19:25 +1300 Subject: [Healeys] Hood grille insert- on top or underneath? Was the chrome grille section of the hood air scoop on the six cylinder cars originally fitted from underneath the hood metal or on top of it, underneath the trim? It fits better on top, but then the upper trim gets angled upwards slightly which looks odd. Underneath it digs into the paint at the bottom, as do the ends of the trim. Completely inside- definitely not correct http://www.alamy.com/stock-photo-austin-healey-bonnet-badge-48145309.html Underneath- looks nice but you can see the paint getting damaged at the edges http://www.alamy.com/stock-photo-austin-healey-car-badge-31424979.html On top- clears the paint but sits up and looks a bit odd http://www.alamy.com/stock-photo-austine-healey-3000-mk3-bonnet-badge-detail-113502437.html https://images.fineartamerica.com/images-medium-large-5/austin-healey-3000-grille-emblem-jill-reger.jpg Andy. From rrengineer.mike at att.net Fri Mar 17 18:30:29 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Sat, 18 Mar 2017 00:30:29 +0000 (UTC) Subject: [Healeys] Yet Another Oil Thread References: <336437506.2507068.1489797029464.ref@mail.yahoo.com> What do you think of Lucas Break in oil.? Says it is 3600 PPM of zinc.? Is that too much? Mike MacLean -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Mar 17 18:56:12 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 17:56:12 -0700 Subject: [Healeys] Yet Another Oil Thread References: <336437506.2507068.1489797029464.ref@mail.yahoo.com> <336437506.2507068.1489797029464@mail.yahoo.com> I hope not. It's what my engine builder used--30W--in my 'new' BJ8 engine for break-in; he swears by it. He says to keep it in for 500 miles. He also says while Valvoline 20W-50 is good, to add ZDDP additive to it. Bob On 3/17/2017 5:30 PM, Michael MacLean wrote: > What do you think of Lucas Break in oil. Says it is 3600 PPM of > zinc. Is that too much? > Mike MacLean > -------------- next part -------------- An HTML attachment was scrubbed... URL: From steveg at abrazosdata.com Fri Mar 17 18:59:28 2017 From: steveg at abrazosdata.com (=?iso-8859-1?Q?Steve=20B.=20Gerow?=) Date: Fri, 17 Mar 2017 16:59:28 -0800 Subject: [Healeys] =?iso-8859-1?q?Throttle_Springs?= Bob, Do you still have the big mousetrap spring on the gas pedal? If that's true and the pedal is still too light, you could add a stretch coil spring between the upper part of the pedal and the steering column lower bracket. I did this for a while in the oughts when Moss was out of stock on the mousetrap springs. -- Steve Gerow Altadena, CA BN6 Maker of Most Complete Big Healey Rear Disc Kit >>> Date: Thu, 16 Mar 2017 19:23:02 -0700 From: Bob Spidell To: Healeys Subject: [Healeys] Throttle Springs I carelessly overstretched my old throttle return springs--2 of them on my BJ8--removing them before rebuild but thought 'No big deal; they're only a couple bucks apiece.' So I bought new ones, installed them, and the resistance in the gas pedal is so light I'm not sure the car (BJ8) will be as driveable; i.e. the pedal 'touch' may be too sensitive. Since I replaced seriously worn throttle shaft bushes with teflon/nylon, the change may be due to that--I'm just used to pushing harder on a worn out mechanism--or, possibly, the repo springs are weaker (they DO look a little wimpier). I haven't driven the car yet--maybe I'll prefer a lighter pedal--but has anyone else bought new springs and thought they weren't as, er, springy as the originals? Bob <<< From bspidell at comcast.net Fri Mar 17 20:54:05 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 19:54:05 -0700 Subject: [Healeys] Throttle Springs References: <20170318005928.22924.qmail@hoster902.com> Might do that, and/or add additional wimpy throttle springs on the manifold. We'll see how the pedal feels when I get her back on the road. Bob On 3/17/2017 5:59 PM, Steve B. Gerow wrote: > Bob, > Do you still have the big mousetrap spring on the gas pedal? > > If that's true and the pedal is still too light, you could add a stretch coil spring between the upper part of the pedal and the steering column lower bracket. I did this for a while in the oughts when Moss was out of stock on the mousetrap springs. From eschulz at frontiernet.net Sat Mar 18 19:19:21 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Sat, 18 Mar 2017 21:19:21 -0400 Subject: [Healeys] Hood grille insert- on top or underneath? References: On top of the hood metal and underneath the trim Elton On 3/17/2017 5:19 PM, A H List wrote: > Was the chrome grille section of the hood air scoop on the six > cylinder cars originally fitted from underneath the hood metal or on > top of it, underneath the trim? > > It fits better on top, but then the upper trim gets angled upwards > slightly which looks odd. Underneath it digs into the paint at the > bottom, as do the ends of the trim. > > Completely inside- definitely not correct > http://www.alamy.com/stock-photo-austin-healey-bonnet-badge-48145309.html > > Underneath- looks nice but you can see the paint getting damaged at the edges > http://www.alamy.com/stock-photo-austin-healey-car-badge-31424979.html > > On top- clears the paint but sits up and looks a bit odd > http://www.alamy.com/stock-photo-austine-healey-3000-mk3-bonnet-badge-detail-113502437.html > https://images.fineartamerica.com/images-medium-large-5/austin-healey-3000-grille-emblem-jill-reger.jpg > > > Andy. > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > > From dwflagg at juno.com Sun Mar 19 09:35:15 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Sun, 19 Mar 2017 15:35:15 GMT Subject: [Healeys] Shelley Tommy Bar Would anyone have a spare Shelley LJ21 56 tommy bar available for purchase? Many thanks. Cheers, Doug ____________________________________________________________ 3 Things You Should Know About Probiotics Gundry MD http://thirdpartyoffers.juno.com/TGL3141/58cea576af58025760661st02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From cleona44 at hotmail.com Sun Mar 19 12:05:25 2017 From: cleona44 at hotmail.com (Jim Lesher) Date: Sun, 19 Mar 2017 18:05:25 +0000 Subject: [Healeys] Handbook Supplement References: Michael - did you have any success? you may want to try a posting in www.britishcarforum.com best of luck ________________________________ From: Healeys on behalf of Michael Salter Sent: Friday, March 17, 2017 1:28 PM To: healeys at autox.team.net Subject: [Healeys] Handbook Supplement We have been writing a supplement for the Concours Guidelines and are looking for some good scans or photographs of the following publication. Oct, 1956, Pub # 1434 - "Austin-Healey "100 - SIX" PRELIMINARY MAINTENANCE INSTRUCTIONS" - this is a 6 page hardback folder Anyone on the list who could help with that? Michael S Technical Chairman Big Healeys Concours Guidelines Committee -------------- next part -------------- An HTML attachment was scrubbed... URL: From 67healey at gmail.com Sun Mar 19 13:42:47 2017 From: 67healey at gmail.com (Healey) Date: Sun, 19 Mar 2017 12:42:47 -0700 Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20170223_121354[1].jpg Type: image/jpeg Size: 3964341 bytes Desc: not available URL: From fmags at cox.net Sun Mar 19 16:33:35 2017 From: fmags at cox.net (Frank Magnusson) Date: Sun, 19 Mar 2017 17:33:35 -0500 Subject: [Healeys] Are these holes original Hi Neil, My '65 BJ8 does not have those. Frank Sent from my iPad From simon.lachlan at homecall.co.uk Sun Mar 19 17:08:24 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Sun, 19 Mar 2017 23:08:24 -0000 Subject: [Healeys] Are these holes original? References: I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Sun Mar 19 17:28:57 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sun, 19 Mar 2017 19:28:57 -0400 Subject: [Healeys] Are these holes original? References: My 67 has one hole on each side. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 19, 2017, at 3:42 PM, Healey <67healey at gmail.com> wrote: > > 67 BJ8 (late), currently undergoing bodywork before paint. > > There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. > > Pardon the poor picture - hopefully you get the idea. > > Thanks in advance, > > Neil > <20170223_121354[1].jpg> > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > From dwflagg at juno.com Sun Mar 19 17:51:56 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Sun, 19 Mar 2017 23:51:56 GMT Subject: [Healeys] Are these holes original? Or full the holes? I’d guess (only) that those four holes – two at each corner, right? – were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I’ve got one….it’s a decent enough thing.I’m surprised that one fits repair patch panels to a boot lid. Doesn’t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58cf19cc81a8119cc390cst04duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From molony at dodo.com.au Sun Mar 19 20:32:46 2017 From: molony at dodo.com.au (Graeme Molony) Date: Mon, 20 Mar 2017 13:32:46 +1100 Subject: [Healeys] Are these holes original? References: Hi all, I have just checked my late 65 BJ8 which has no holes. As far as I'm aware it is an original trunk lid and has never had a replacement panel on the lid more than I can say for the remainder of the car as all of the lower sections of the panels required replacement when I purchased it 30 years or so ago Graeme M -----Original Message----- From: R. Lindsay Sent: Monday, March 20, 2017 10:28 AM To: Healey Cc: Austin Healey Subject: Re: [Healeys] Are these holes original? My 67 has one hole on each side. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 19, 2017, at 3:42 PM, Healey <67healey at gmail.com> wrote: > > 67 BJ8 (late), currently undergoing bodywork before paint. > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a > function of previous bodywork. > > Pardon the poor picture - hopefully you get the idea. > > Thanks in advance, > > Neil > <20170223_121354[1].jpg> > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au From dcorning at ford.com Mon Mar 20 06:12:55 2017 From: dcorning at ford.com (Corning, Dan (D.C.)) Date: Mon, 20 Mar 2017 12:12:55 +0000 Subject: [Healeys] =?windows-1252?q?Smith=92s_Gauge_Oil_/_Temp_Gauge_Senso?= =?windows-1252?q?r?= I recently purchased a replacement Smiths Gauge Oil / Temp Gauge. The gauge was shipped loose in the box and the sensor wire was bent at 90 degrees during shipment. If I bend the wire back would it likely be reliable or should I return it to the vendor? Best, Dan Corning -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_2633.JPG Type: image/jpeg Size: 192140 bytes Desc: IMG_2633.JPG URL: From sbyers at ec.rr.com Mon Mar 20 07:06:55 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Mon, 20 Mar 2017 09:06:55 -0400 Subject: [Healeys] Smith's Gauge Oil / Temp Gauge Sensor References: As long as you don't break the capillary tube, the gauge will work as it should. The tube is made of a very soft metal and can be straightened if done carefully Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Corning, Dan (D.C.) Sent: Monday, March 20, 2017 8:13 AM To: healeys at autox.team.net Subject: [Healeys] Smith's Gauge Oil / Temp Gauge Sensor I recently purchased a replacement Smiths Gauge Oil / Temp Gauge. The gauge was shipped loose in the box and the sensor wire was bent at 90 degrees during shipment. If I bend the wire back would it likely be reliable or should I return it to the vendor? Best, Dan Corning Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at gmail.com Mon Mar 20 09:00:02 2017 From: healeydoc at gmail.com (David Nock) Date: Mon, 20 Mar 2017 08:00:02 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock healeydoc at sbcglobal.net 209 948 8767 www.britishcarspecialists.com From: Simon Lachlan Sent: Sunday, March 19, 2017 4:08 PM To: 'Healey' ; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 20 09:27:19 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 20 Mar 2017 15:27:19 -0000 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> Send me the distance between the 2 mystery holes and I?ll compare to my luggage rack/my boot lid. Simon From: David Nock [mailto:healeydoc at gmail.com] Sent: 20 March 2017 15:00 To: Simon Lachlan ; 'Healey' <67healey at gmail.com>; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock 209 948 8767 www.britishcarspecialists.com Sent: Sunday, March 19, 2017 4:08 PM Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil _____ _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From 67healey at gmail.com Mon Mar 20 09:53:29 2017 From: 67healey at gmail.com (Healey) Date: Mon, 20 Mar 2017 08:53:29 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> Thanks guys - I appreciate the replies. So, the consensus would be that the holes were for a previously mounted luggage rack. Which makes sense, because the car also has nuts & bolts going through the trunk hinges where the pins would normally be. Which would lead to a follow up question - does anyone know where I could get just the hinge pins (or something equivalent) instead of paying Moss $60 per for each hinge? Does anyone have a couple lying around? :-) @Simon - here is the boot lid patch panel: http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28951#76 It's only a few inches wide, and is really just for repairing the rusty bottom lip. Thanks, Neil On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: > Send me the distance between the 2 mystery holes and I?ll compare to my > luggage rack/my boot lid. > > Simon > > > > *From:* David Nock [mailto:healeydoc at gmail.com] > *Sent:* 20 March 2017 15:00 > *To:* Simon Lachlan ; 'Healey' < > 67healey at gmail.com>; 'Austin Healey' > > *Subject:* Re: [Healeys] Are these holes original? > > > > The only holes along the bottom edge of the trunk lip are for the rivits > that attach shroud to the chassis lip. And the 3 buffers. If there was a > drain hole it would drain into the trunk. > > > > > > David Nock > healeydoc at sbcglobal.net > 209 948 8767 <(209)%20948-8767> > www.britishcarspecialists.com > > > > *From:* Simon Lachlan > > *Sent:* Sunday, March 19, 2017 4:08 PM > > *To:* 'Healey' <67healey at gmail.com> ; 'Austin Healey' > > > *Subject:* Re: [Healeys] Are these holes original? > > > > I?d guess (only) that those four holes ? two at each corner, right? ? were > for the attachment of a luggage rack. There was/is a rack that was attached > via the boot hinge pins and by screwing triangular mounting plates onto the > bottom corners. I?ve got one?.it?s a decent enough thing. > > I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one > just fit a new one? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *Healey > *Sent:* 19 March 2017 19:43 > *To:* Austin Healey > *Subject:* [Healeys] Are these holes original? > > > > 67 BJ8 (late), currently undergoing bodywork before paint. > > > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a function > of previous bodywork. > > > > Pardon the poor picture - hopefully you get the idea. > > > > Thanks in advance, > > > > Neil > ------------------------------ > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 20 12:09:21 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 20 Mar 2017 11:09:21 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> I'd like to see a photo of how the luggage rack attaches Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: > Send me the distance between the 2 mystery holes and I?ll compare to my > luggage rack/my boot lid. > > Simon > > > > *From:* David Nock [mailto:healeydoc at gmail.com] > *Sent:* 20 March 2017 15:00 > *To:* Simon Lachlan ; 'Healey' < > 67healey at gmail.com>; 'Austin Healey' > *Subject:* Re: [Healeys] Are these holes original? > > > > The only holes along the bottom edge of the trunk lip are for the rivits > that attach shroud to the chassis lip. And the 3 buffers. If there was a > drain hole it would drain into the trunk. > > > > > > David Nock > healeydoc at sbcglobal.net > 209 948 8767 <(209)%20948-8767> > www.britishcarspecialists.com > > > > *From:* Simon Lachlan > > *Sent:* Sunday, March 19, 2017 4:08 PM > > *To:* 'Healey' <67healey at gmail.com> ; 'Austin Healey' > > > *Subject:* Re: [Healeys] Are these holes original? > > > > I?d guess (only) that those four holes ? two at each corner, right? ? were > for the attachment of a luggage rack. There was/is a rack that was attached > via the boot hinge pins and by screwing triangular mounting plates onto the > bottom corners. I?ve got one?.it?s a decent enough thing. > > I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one > just fit a new one? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *Healey > *Sent:* 19 March 2017 19:43 > *To:* Austin Healey > *Subject:* [Healeys] Are these holes original? > > > > 67 BJ8 (late), currently undergoing bodywork before paint. > > > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a function > of previous bodywork. > > > > Pardon the poor picture - hopefully you get the idea. > > > > Thanks in advance, > > > > Neil > ------------------------------ > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at gmail.com > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 20 13:43:09 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 20 Mar 2017 12:43:09 -0700 Subject: [Healeys] MkII. MkIII Howdy During a discussion today their was a question about the mkii 3000 and phase two. Did only the phase 2 cars have front dual running lights or when did the dual front plastic running light change happen on US spec cars Ira Erbs 1959 100-6 MKI engine and disc brakes Portland,OR -------------- next part -------------- An HTML attachment was scrubbed... URL: From schottc at knology.net Mon Mar 20 14:51:49 2017 From: schottc at knology.net (Charlie Schott) Date: Mon, 20 Mar 2017 15:51:49 -0500 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> Here is what mine looks like. I believe that I got the luggage rack from British Victoria. Regards, Charlie Schott From: i erbs Sent: Monday, March 20, 2017 1:09 PM To: Simon Lachlan Cc: Austin Healey Subject: Re: [Healeys] Are these holes original? I'd like to see a photo of how the luggage rack attaches Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: Send me the distance between the 2 mystery holes and I?ll compare to my luggage rack/my boot lid. Simon From: David Nock [mailto:healeydoc at gmail.com] Sent: 20 March 2017 15:00 To: Simon Lachlan ; 'Healey' <67healey at gmail.com>; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock healeydoc at sbcglobal.net 209 948 8767 www.britishcarspecialists.com From: Simon Lachlan Sent: Sunday, March 19, 2017 4:08 PM To: 'Healey' ; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil ------------------------------------------------------------------------------ _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1557.JPG Type: image/jpeg Size: 2839786 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1558.JPG Type: image/jpeg Size: 2470733 bytes Desc: not available URL: From sbyers at ec.rr.com Mon Mar 20 16:22:15 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Mon, 20 Mar 2017 18:22:15 -0400 Subject: [Healeys] MkII. MkIII References: Phase 1 BJ8s had single lights under the headlamps with small clear glass lenses like BJ7s. The early Phase 2 cars had single lights under the headlamps with larger clear plastic lenses. This was true up to body number 76137. From body 76138 and up, they had dual lights under the headlamps with amber turn signals and clear parking lights. That is according to the BMC parts manual for BJ7/BJ8, but quite a few cars have been found with pre-body number 76138 dual lights and post-body number 76138 with single light configurations. Shrouds may have been changed from original, or maybe not; but it's hard to verify any BMC change that sticks hard and fast to the parts manual. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Monday, March 20, 2017 3:43 PM To: Ahealey help Subject: [Healeys] MkII. MkIII Howdy During a discussion today their was a question about the mkii 3000 and phase two. Did only the phase 2 cars have front dual running lights or when did the dual front plastic running light change happen on US spec cars Ira Erbs 1959 100-6 MKI engine and disc brakes Portland,OR Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmags at cox.net Mon Mar 20 18:53:56 2017 From: fmags at cox.net (Frank Magnusson) Date: Mon, 20 Mar 2017 19:53:56 -0500 Subject: [Healeys] Mk II. Mk III Hi Ira, My '65 BJ8 is a very early phase II car; phase II rear suspension with a phase I body. It has the single plastic running lights in the front and the small reflectors in the rear. Frank Sent from my iPad From gablegerry at netscape.net Mon Mar 20 19:44:46 2017 From: gablegerry at netscape.net (gablegerry at netscape.net) Date: Mon, 20 Mar 2017 21:44:46 -0400 Subject: [Healeys] Healey Blue again Can anyone tell me is the Healey Blue on a BN6 was a solid color or had specs in it? Thanks Gerry -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeymanjim at hansencc.net Mon Mar 20 20:38:09 2017 From: healeymanjim at hansencc.net (=?utf-8?Q?healeymanjim?=) Date: Mon, 20 Mar 2017 19:38:09 -0700 Subject: [Healeys] =?utf-8?q?MKII=2C_MKIII?= lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. From p_cquinn at tpg.com.au Mon Mar 20 23:04:14 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Tue, 21 Mar 2017 16:04:14 +1100 Subject: [Healeys] Mk II. Mk III References: G'day With all 3000s the twin lights were introduced in late March 1965, before than it depended on what country the car was delivered to. With cars delivered new to certain European countries (Sweden and German) some models as early 3000 Mk 1s had dual beehive style sidelights or even smaller lights than that. In the main, with the BJ8 S2 came the wider single plastic lens front and rear. Hoo Roo Patrick Quinn Blue Mountains, Australia -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Frank Magnusson Sent: Tuesday, 21 March 2017 11:54 AM To: healeys at autox.team.net; eyera3000 at gmail.com Subject: Re: [Healeys] Mk II. Mk III Hi Ira, My '65 BJ8 is a very early phase II car; phase II rear suspension with a phase I body. It has the single plastic running lights in the front and the small reflectors in the rear. Frank Sent from my iPad _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/p_cquinn at tpg.com.au From coudesluijs at chello.nl Tue Mar 21 01:35:57 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Tue, 21 Mar 2017 08:35:57 +0100 Subject: [Healeys] MkII. MkIII References: <00b501d2a1c8$6e5f82d0$4b1e8870$@rr.com> It is not unknown that Jensen, who built the AH100-3000 used what was at hand at the moment and during the transition to new models parts of older models were found the new models and v.v. You cannot go by the chassis number around the change to another variant of the model. It is the same in Jensens. It is not uncommon in other makes either. Common sense to get rid of stock which otherwise would get dumped. Kees Oudesluijs Op 20-3-2017 om 23:22 schreef BJ8Healeys: > > Phase 1 BJ8s had single lights under the headlamps with small clear > glass lenses like BJ7s. The early Phase 2 cars had single lights > under the headlamps with larger clear plastic lenses. This was true > up to body number 76137. From body 76138 and up, they had dual lights > under the headlamps with amber turn signals and clear parking lights. > That is according to the BMC parts manual for BJ7/BJ8, but quite a few > cars have been found with pre-body number 76138 dual lights and > post-body number 76138 with single light configurations. Shrouds may > have been changed from original, or maybe not; but it's hard to verify > any BMC change that sticks hard and fast to the parts manual. > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *i erbs > *Sent:* Monday, March 20, 2017 3:43 PM > *To:* Ahealey help > *Subject:* [Healeys] MkII. MkIII > > Howdy > During a discussion today their was a question about the mkii 3000 > and phase two. Did only the phase 2 cars have front dual running lights > > or when did the dual front plastic running light change happen on US > spec cars > > Ira Erbs > 1959 100-6 > MKI engine and disc brakes > Portland,OR > > > > > > Virus-free. www.avg.com > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 07:14:53 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 09:14:53 -0400 Subject: [Healeys] MKII, MKIII References: <20170321023809.555.qmail@server278.com> As stated before, the light configuration change was based on body number, not chassis number. BMIHT data records the change point body number at 76138 for the dual lights. The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. From healeyrik at gmail.com Tue Mar 21 08:47:17 2017 From: healeyrik at gmail.com (HealeyRick) Date: Tue, 21 Mar 2017 10:47:17 -0400 Subject: [Healeys] Last Big Healey? *When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the *Austin-Healey 3000 Mk III * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. *?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,?* said Richard Greenhalgh, specialist at Classic Car Auctions . So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen . And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 09:43:31 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 08:43:31 -0700 Subject: [Healeys] Last Big Healey? References: Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 Fantastic looking car. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 09:45:53 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 08:45:53 -0700 Subject: [Healeys] MKII, MKIII References: <20170321023809.555.qmail@server278.com> <00fa01d2a245$21090c90$631b25b0$@rr.com> Thanks, So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > As stated before, the light configuration change was based on body number, > not chassis number. BMIHT data records the change point body number at > 76138 for the dual lights. The data also says that body number belonged to > both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March > 1965). > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > healeymanjim > Sent: Monday, March 20, 2017 10:38 PM > To: healeys at autox.team.net > Subject: [Healeys] MKII, MKIII > > lady in our club had a bj8 with dual lights that she bought at the factory > in june, 1965. no idea of exact changover. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From per at schoerner.se Tue Mar 21 10:01:16 2017 From: per at schoerner.se (Per Schoerner) Date: Tue, 21 Mar 2017 17:01:16 +0100 Subject: [Healeys] Last Big Healey? References: I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums From gbrierton at hotmail.com Tue Mar 21 10:51:42 2017 From: gbrierton at hotmail.com (Gary R. Brierton) Date: Tue, 21 Mar 2017 16:51:42 +0000 Subject: [Healeys] Last Big Healey? References: , Wasn't that car originally white? ________________________________ From: Healeys on behalf of i erbs Sent: Tuesday, March 21, 2017 11:43 AM To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 1967 Austin Healey 3000 MK III - Classic Car Auctions www.classiccarauctions.co.uk Offered for sale is a 3.0L 1967 Austin Healey 3000 MK 3 manual that has been with the current owner for the last 44 years. Coming with a partial history file, this ... Fantastic looking car. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eschulz at frontiernet.net Tue Mar 21 10:57:23 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Tue, 21 Mar 2017 12:57:23 -0400 Subject: [Healeys] Last Big Healey? References: HS6 carbs? Elton On 3/21/2017 10:47 AM, HealeyRick wrote: > *When talking British classics, it's impossible to ignore the likes of > the Jaguar E-Type and Aston Martin DB5. But while those are pop icons > in their own right, the *Austin-Healey 3000 Mk III > * is > a bit of a specialty. > *As compared to Jaguar and Aston Martin, which are still with us, the > venture created by Austin and Donald Healey Motor in 1952 came to a > conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk > III is the car Austin-Healey enthusiasts consider to be the British > outfit's crowning achievement. > > 17,712 examples of the Mark III were produced from '64 to '67, and > this here is the last one ever made. Chassis HBJ843025 was > manufactured on the 21st of December, 1967, and the current owner > bought it 45 years ago. Yup, this is one cherished example of the 3000 > Mk III, a back-to-basics sports car > to > die for. Better still, it has covered only 57,389 miles (92,358 > kilometers) over the course of half a century. > > /"This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect > a significant amount of interest,"/ said Richard Greenhalgh, > specialist at Classic Car Auctions > . So > what's the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA's pre-auction estimate, but only time will tell if > bidding will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey's last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six > powerplant benefits from a high-lift camshaft and SU HS6 carbs, > additions that saw power go up from 136 to 150 bhp. And compared to > the previous iteration, the Mk III boasts power-assisted brakes as > standard. > > Last, but not least, it's noteworthy to point out that this is no > garage queen > . > And even restored, the final Big Healey doesn't fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Tue Mar 21 11:30:21 2017 From: goldengt at cal.net (goldengt) Date: Tue, 21 Mar 2017 10:30:21 -0700 Subject: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked?Ken Freese?65 BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: i erbs Date: 3/21/17 8:45 AM (GMT-08:00) To: BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII Thanks,So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira ErbsPortland,OR? ? ? _______ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?_______ ? ?? (______ \____1959 BN4____/ _______) ? ? ? ?? (_________________________)? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: As stated before, the light configuration change was based on body number, not chassis number.? BMIHT data records the change point body number at 76138 for the dual lights.? The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965.? no idea of exact changover. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Tue Mar 21 11:46:27 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Tue, 21 Mar 2017 17:46:27 -0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Don't know about the colour but I'd always thought - and my books confirm - that the last 3000 was a one-off in '68 and that its chassis number was 43026. Fair enough...this one is '67 and 43025 so they're really saying that it was the last one off the regular production line. I'd hesitate to say last "mass-produced" BJ8! Such trivia....didn't I see that the original email talked about HS6 carbs? Simon -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per Schoerner Sent: 21 March 2017 16:01 To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From ahbn6 at verizon.net Tue Mar 21 11:53:32 2017 From: ahbn6 at verizon.net (John Sims) Date: Tue, 21 Mar 2017 13:53:32 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Wonder of this was painted the famous Metallic Gold Beige when it was restored. What does the Heritage certificate show? John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per Schoerner Sent: Tuesday, March 21, 2017 12:01 PM To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From thehartnetts at earthlink.net Tue Mar 21 12:14:11 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Tue, 21 Mar 2017 11:14:11 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > From healeyrik at gmail.com Tue Mar 21 12:55:19 2017 From: healeyrik at gmail.com (HealeyRick) Date: Tue, 21 Mar 2017 14:55:19 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> Why is it never easy? We need Steve Byers in here to officiate. From Graham Robson's "The Big Healeys", 43025 was the last production car coming off the production line on 12/21/67. Two more cars, 43000 and 43007 were finished in January 1968. The last car, 43026 was built from scratch and finished March 14, 1968. 43026 is detailed here and is white: http://www.ahexp.com/registry/HBJ843026 Robson's book also contains a picture of a BJ8 going down the line with a sign saying "The End" on it, which I'm guessing is 43025. It appears to be a rather dark color (maybe BRG) so perhaps the GBM is a repaint (and why would you change the color of the last production car?) Confusing Healeying, Rick Neville On Tue, Mar 21, 2017 at 1:46 PM, Simon Lachlan wrote: > Don't know about the colour but I'd always thought - and my books confirm > - that the last 3000 was a one-off in '68 and that its chassis number was > 43026. > Fair enough...this one is '67 and 43025 so they're really saying that it > was the last one off the regular production line. I'd hesitate to say last > "mass-produced" BJ8! > Such trivia....didn't I see that the original email talked about HS6 carbs? > Simon > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per > Schoerner > Sent: 21 March 2017 16:01 > To: HealeyRick > Cc: healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > > > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > > > forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/simon.lachlan at homecall.co.uk > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.ewald at gmail.com Tue Mar 21 13:12:36 2017 From: richard.ewald at gmail.com (Richard Ewald) Date: Tue, 21 Mar 2017 12:12:36 -0700 Subject: [Healeys] Car for sale Some people look at the way things aren't and say why not, other people look at what those first people did and say WTF? http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod-Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr There are no words. Rick -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:19:33 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:19:33 -0700 Subject: [Healeys] Last Big Healey? References: I figured Kurt Tanner did the restoration Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 9:51 AM, Gary R. Brierton wrote: > Wasn't that car originally white? > > > ------------------------------ > *From:* Healeys on behalf of i erbs < > eyera3000 at gmail.com> > *Sent:* Tuesday, March 21, 2017 11:43 AM > *To:* HealeyRick > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > Here is a working link to the auction > http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 > > 1967 Austin Healey 3000 MK III - Classic Car Auctions > > www.classiccarauctions.co.uk > Offered for sale is a 3.0L 1967 Austin Healey 3000 MK 3 manual that has > been with the current owner for the last 44 years. Coming with a partial > history file, this ... > > > > Fantastic looking car. > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > >> *When talking British classics, it?s impossible to ignore the likes of >> the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in >> their own right, the *Austin-Healey 3000 Mk III >> >> * is a bit of a specialty. *As compared to Jaguar and Aston Martin, >> which are still with us, the venture created by Austin and Donald Healey >> Motor in 1952 came to a conclusion in 1972. The cutesy Sprite >> is >> a quintessential product of this legendary link-up, albeit the 3000 Mk III >> is the car Austin-Healey enthusiasts consider to be the British outfit?s >> crowning achievement. >> >> 17,712 examples of the Mark III were produced from ?64 to ?67, and this >> here is the last one ever made. Chassis HBJ843025 was manufactured on the >> 21st of December, 1967, and the current owner bought it 45 years ago. Yup, >> this is one cherished example of the 3000 Mk III, a back-to-basics >> sports car >> to >> die for. Better still, it has covered only 57,389 miles (92,358 kilometers) >> over the course of half a century. >> >> *?This is the first time the car has been offered for sale in over 40 >> years and as such an important and iconic British sports car we expect a >> significant amount of interest,?* said Richard Greenhalgh, specialist at Classic >> Car Auctions >> . So what?s >> the estimate on this example of the Big Healey? ?75,000 and ?90,000 is >> CCA?s pre-auction estimate, but only time will tell if bidding will get >> rowdy. >> >> Benefitting from a fresh restoration that finished just a year ago, >> Healey?s last-ever Mk III is joined by a large history file, lots of >> documents, and a heritage certificate. Of course, the inline-six powerplant >> benefits from a high-lift camshaft and SU HS6 carbs, additions that saw >> power go up from 136 to 150 bhp. And compared to the previous iteration, >> the Mk III boasts power-assisted brakes as standard. >> >> Last, but not least, it?s noteworthy to point out that this is no garage >> queen >> . >> And even restored, the final Big Healey doesn?t fail to show its patina. >> >> Source: https://www.autoevolution.com/news/t...on-116318.html >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:21:37 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:21:37 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> It's what I do ") Just really trying get my head around the differences as I have not worked on BJ8s in decades and it came up in a conversation at a meeting Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 10:30 AM, goldengt wrote: > For years and years, I have been told phase 1/2 is all about rear > suspension and nothing to do with lights. Why is the boat being rocked? > Ken Freese > 65 BJ8 > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: i erbs > Date: 3/21/17 8:45 AM (GMT-08:00) > To: BJ8Healeys > Cc: Ahealey help > Subject: Re: [Healeys] MKII, MKIII > > Thanks, > So is that a phase 2 car? If so, what other changes came with the phase 2 > designation? > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > >> As stated before, the light configuration change was based on body number, >> not chassis number. BMIHT data records the change point body number at >> 76138 for the dual lights. The data also says that body number belonged >> to >> both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March >> 1965). >> >> Steve Byers >> HBJ8L/36666 >> BJ8 Registry >> AHCA Delegate at Large >> Havelock, NC >> >> >> >> -----Original Message----- >> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of >> healeymanjim >> Sent: Monday, March 20, 2017 10:38 PM >> To: healeys at autox.team.net >> Subject: [Healeys] MKII, MKIII >> >> lady in our club had a bj8 with dual lights that she bought at the factory >> in june, 1965. no idea of exact changover. >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:33:04 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:33:04 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> <004501d2a279$4f4aa440$eddfecc0$@homecall.co.uk> Healey boats? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 12:28 PM, Simon Lachlan < simon.lachlan at homecall.co.uk> wrote: > That?s what boats are for? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > goldengt > *Sent:* 21 March 2017 17:30 > *To:* i erbs ; BJ8Healeys > > *Cc:* Ahealey help > *Subject:* Re: [Healeys] MKII, MKIII > > > > For years and years, I have been told phase 1/2 is all about rear > suspension and nothing to do with lights. Why is the boat being rocked? > > Ken Freese > > 65 BJ8 > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: i erbs > > Date: 3/21/17 8:45 AM (GMT-08:00) > > To: BJ8Healeys > > Cc: Ahealey help > > Subject: Re: [Healeys] MKII, MKIII > > > > Thanks, > > So is that a phase 2 car? If so, what other changes came with the phase 2 > designation? > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > > As stated before, the light configuration change was based on body number, > not chassis number. BMIHT data records the change point body number at > 76138 for the dual lights. The data also says that body number belonged to > both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March > 1965). > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > healeymanjim > Sent: Monday, March 20, 2017 10:38 PM > To: healeys at autox.team.net > Subject: [Healeys] MKII, MKIII > > lady in our club had a bj8 with dual lights that she bought at the factory > in june, 1965. no idea of exact changover. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 13:43:18 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 15:43:18 -0400 Subject: [Healeys] Last Big Healey? References: HBJ8/43025 was NOT the last one ever made. That hono(u)r goes to HBJ8/43026, which was not assembled on the regular production line but in the "Show Shop" three months after regular production ended (it was, and is, Ivory White). 43025 was not even the last car built on the production line (which was 43000, built 23 Nov 67 - 11 Jan 68). 43025 was the last car painted Metallic Golden Beige. Whoever wrote the description below also got the build date for 43025 wrong. It was built (per the BMIHT certificate) 1 - 16 November 1967 and dispatched on 22 November to the Donald Healey Motor Co. Funny that they would get the build date wrong, since they say the certificate is available. 43025 did not leave the factory with HS6 carbs. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC TARHEELY license plate From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Tuesday, March 21, 2017 10:47 AM To: healeys at autox.team.net Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 19755 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From eyera3000 at gmail.com Tue Mar 21 13:48:54 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:48:54 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> I love the details. The arcane knowledge on this list is always amazing. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 10:46 AM, Simon Lachlan < simon.lachlan at homecall.co.uk> wrote: > Don't know about the colour but I'd always thought - and my books confirm > - that the last 3000 was a one-off in '68 and that its chassis number was > 43026. > Fair enough...this one is '67 and 43025 so they're really saying that it > was the last one off the regular production line. I'd hesitate to say last > "mass-produced" BJ8! > Such trivia....didn't I see that the original email talked about HS6 carbs? > Simon > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per > Schoerner > Sent: 21 March 2017 16:01 > To: HealeyRick > Cc: healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > > > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > > > forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/simon.lachlan at homecall.co.uk > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 14:06:16 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 16:06:16 -0400 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> Because the original question was "When did the dual lights begin"? The definition of Phase 1 and Phase 2 does not depend on light configuration alone; but Phase 2 cars had different light configurations depending on body number -- or depending on the whims at the assembly factory. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: goldengt [mailto:goldengt at cal.net] Sent: Tuesday, March 21, 2017 1:30 PM To: i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked? Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Tue Mar 21 14:18:26 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Tue, 21 Mar 2017 20:18:26 -0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> Hardly arcane knowledge. I just refer to reference books, as do most of us. Pretty well all to be bought on eBay or Amazon. Simon From: i erbs [mailto:eyera3000 at gmail.com] Sent: 21 March 2017 19:49 To: Simon Lachlan Cc: Ahealey help Subject: Re: [Healeys] Last Big Healey? I love the details. The arcane knowledge on this list is always amazing. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Don't know about the colour but I'd always thought - and my books confirm - that the last 3000 was a one-off in '68 and that its chassis number was 43026. Fair enough...this one is '67 and 43025 so they're really saying that it was the last one off the regular production line. I'd hesitate to say last "mass-produced" BJ8! Such trivia....didn't I see that the original email talked about HS6 carbs? Simon -----Original Message----- Sent: 21 March 2017 16:01 Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > > forums _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 14:35:06 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 13:35:06 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> I thought the plastic lenses indicated phase 2. the dual front lights was just called late phase 2 or back in the day phase 2+. Do you know of any official nomenclature change for the dual front plastic lens cars? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 1:28 PM, Michael Salter wrote: > Wait, wait, wait...we are all getting confused here!!! > The suspension change was at the transition from the so called Phase I BJ8 > to the Phase II BJ8. > That change which replaced the Panhard Rod rear suspension with the later > radius arm type occurred at (C) 26705. > At the same car (C) number 26705 the side lamp assemblies were changed > from the glass lensed rubber body Lucas Model 594 to the chromed pressed > steel plastic lensed Lucas Model 691/2. > There were various other changes at the same time, cubby box in center > console, pull to push button door handles, ear shocks, larger front brakes > +++. > The introduction of separate side and flasher lamps on the front and > separate stop/tail and flasher at the rear commenced at body number (B) > H-BJ8-76137 and that change is listed in the parts book. No suspension > changes were made at that time. > All the cars with plastic lensed side and tail lights, whether 1 or 2 are > considered to be Phase II. > Michael S > BN1 #174 > > > On Tue, Mar 21, 2017 at 1:30 PM, goldengt wrote: > >> For years and years, I have been told phase 1/2 is all about rear >> suspension and nothing to do with lights. Why is the boat being rocked? >> Ken Freese >> 65 BJ8 >> >> >> >> Sent from my Verizon, Samsung Galaxy smartphone >> >> -------- Original message -------- >> From: i erbs >> Date: 3/21/17 8:45 AM (GMT-08:00) >> To: BJ8Healeys >> Cc: Ahealey help >> Subject: Re: [Healeys] MKII, MKIII >> >> Thanks, >> So is that a phase 2 car? If so, what other changes came with the phase 2 >> designation? >> >> Ira Erbs >> Portland,OR >> _______ _______ >> (______ \____1959 BN4____/ _______) >> (_________________________) >> BT7 engine and disk brakes >> >> A racing car is an animal with a thousand adjustments. Mario Andretti >> Please excuse random auto corrects and misspelled words >> >> On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: >> >>> As stated before, the light configuration change was based on body >>> number, >>> not chassis number. BMIHT data records the change point body number at >>> 76138 for the dual lights. The data also says that body number belonged >>> to >>> both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March >>> 1965). >>> >>> Steve Byers >>> HBJ8L/36666 >>> BJ8 Registry >>> AHCA Delegate at Large >>> Havelock, NC >>> >>> >>> >>> -----Original Message----- >>> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of >>> healeymanjim >>> Sent: Monday, March 20, 2017 10:38 PM >>> To: healeys at autox.team.net >>> Subject: [Healeys] MKII, MKIII >>> >>> lady in our club had a bj8 with dual lights that she bought at the >>> factory >>> in june, 1965. no idea of exact changover. >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: http://autox.team.net/mailman/ >>> options/healeys/eyera3000 at gmail.com >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/michaelsalter at gmail.com >> >> >> > > > -- > *If you can't fix it with a hammer, you've got an electrical problem.* > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 15:56:57 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 17:56:57 -0400 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> Rich, the parts manual says the placement of the license plate was below the rear bumper up to body number 79899 for USA and Canadian cars (no chassis recorded in the registry for that body, but body 79898 is chassis 34992). >From body 79900, a bumper-mounted license plate holder was effective. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Richard Kahn [mailto:tahoehealey at hotmail.com] Sent: Tuesday, March 21, 2017 5:28 PM To: goldengt; i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII My phase 1 has the single glass bee-hive lights, the cubby in the center counsel, pan-hard rod across the rear axle and the earlier body height that centers the wheels in the wheel wells. There is a difference in the placement of the license plates on the bumpers. Rich Kahn _____ From: Healeys on behalf of goldengt Sent: Tuesday, March 21, 2017 10:30 AM To: i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked? Ken Freese 65 BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: i erbs Date: 3/21/17 8:45 AM (GMT-08:00) To: BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII Thanks, So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: As stated before, the light configuration change was based on body number, not chassis number. BMIHT data records the change point body number at 76138 for the dual lights. The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From gbrierton at hotmail.com Tue Mar 21 15:59:11 2017 From: gbrierton at hotmail.com (Gary R. Brierton) Date: Tue, 21 Mar 2017 21:59:11 +0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se>, My left hand driver is 40045, built in January, 1967. I owned another BJ8 lefty, # 39981 built. Oct. 30 ? Nov. 2, 1966 Oddly enough, it was not ?Dispatched? ?til 2/67. Built before my current BJ8, but dispatched after. I also find it interesting that I bought these cars almost 20 years apart (#39981 in Feb. 1977, #40045 in Nov. 1996) and the numbers are only 64 digits apart! Trivia for my idle mind.... ________________________________ From: Healeys on behalf of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... > Suggested annual donation $12.75 > Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys Healeys -- Austin Healey Discussion - Team.Net autox.team.net To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ... > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Healeys -- Austin Healey Discussion - Team.Net autox.team.net To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ... -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 16:14:25 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 18:14:25 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com From vintage_roadster_restoration at hotmail.com Tue Mar 21 18:33:58 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Wed, 22 Mar 2017 00:33:58 +0000 Subject: [Healeys] Last Big Healey? References: "Fresh from a restoration done a year ago". I guess that the term " restoration" is used pretty loosely here. Perhaps saying that it has been resprayed would have been more accurate but it would not get bidders as enthusiastic to bring it up even to the lowest estimate. I can see keeping the original seats to show that "patina" makes sense but the very least they could have done is install the piping on the aluminum door trim, the rubber bumpers on the front shroud for the bonnet and the rubber seal for the trunk actually installed on the trunk lid. At the same time they could have secured the spare tire at its proper location with the metal bar and leather belt holding it in place. I am quite amazed that they di install the fender flash the correct way. Jean ________________________________ From: Healeys on behalf of HealeyRick Sent: March 21, 2017 2:47 PM To: healeys at autox.team.net Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From kags at shaw.ca Tue Mar 21 18:38:33 2017 From: kags at shaw.ca (Earl Kagna) Date: Tue, 21 Mar 2017 17:38:33 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Nope Len. I own 42845, and a good friend close by owns 43014 - both LHD. I know where 43012 is also built and sold LHD, but has been converted to RHD by the current owner. Earl Kagna Victoria, B.C. BJ8, BT7 tri-carb -----Original Message----- From: Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 11:14 AM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/kags at shaw.ca From phoenix722 at comcast.net Tue Mar 21 19:14:42 2017 From: phoenix722 at comcast.net (Mike S) Date: Tue, 21 Mar 2017 18:14:42 -0700 Subject: [Healeys] Car for sale References: Awful. On 3/21/2017 12:12 PM, Richard Ewald wrote: > Some people look at the way things aren't and say why not, other > people look at what those first people did and say WTF? > > http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod-Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr > > There are no words. > Rick > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Tue Mar 21 19:17:07 2017 From: michael.salter at gmail.com (michael.salter at gmail.com) Date: Wed, 22 Mar 2017 01:17:07 +0000 (UTC) Subject: [Healeys] Greg Cory Does anyone have a current email address for Greg Cory, Sprite racer from CA. gregicory at gmail.com doesn't seem to work. Thanks Michael S BN1 #174 . -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 21 20:25:21 2017 From: bspidell at comcast.net (Bob Spidell) Date: Wed, 22 Mar 2017 03:25:21 +0100 (CET) Subject: [Healeys] Dammit! Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.ewald at gmail.com Tue Mar 21 20:51:13 2017 From: richard.ewald at gmail.com (Richard Ewald) Date: Tue, 21 Mar 2017 19:51:13 -0700 Subject: [Healeys] Car for sale References: <54f7b89b-79fd-072e-6b55-e4d24e2c8454@comcast.net> Ya think? On Tue, Mar 21, 2017 at 6:14 PM, Mike S wrote: > Awful. > > On 3/21/2017 12:12 PM, Richard Ewald wrote: > > Some people look at the way things aren't and say why not, other people > look at what those first people did and say WTF? > > http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod- > Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr > > There are no words. > Rick > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > > > -- > Mike > > MGTD (long gone) > BN1 (long gone) > BN2-100M (gone but in good hands) > BJ8 > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Wed Mar 22 05:45:19 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Wed, 22 Mar 2017 11:45:19 +0000 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From gilrockwell at gmail.com Wed Mar 22 06:30:23 2017 From: gilrockwell at gmail.com (Gil Rockwell) Date: Wed, 22 Mar 2017 08:30:23 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> WHAT A SHAME! Without him, the show will never be the same?.. This is (or was) the only really worthwhile show to watch, and Edd was the reason. What a bunch of idiots at Velocity! Gil 61 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Tuesday, March 21, 2017 10:25 PM To: healeys Subject: [Healeys] Dammit! Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Wed Mar 22 06:44:33 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Wed, 22 Mar 2017 12:44:33 +0000 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com>, Also got a mail notice that Hemmings Sports and Exotics Magazine is closing its doors. I was an original subscriber and found it to be one of the best in the business. This appears to be a victim of technology. Regards, Richard C One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _____ -------------- next part -------------- An HTML attachment was scrubbed... URL: From wjc3 at citlink.net Wed Mar 22 06:50:34 2017 From: wjc3 at citlink.net (wjc3 at citlink.net) Date: Wed, 22 Mar 2017 12:50:34 +0000 (UTC) Subject: [Healeys] Last Big Healey? References: <25579615.1291862.1490187034562.ref@mail.yahoo.com> Pretty Car. -------------------------------------------- On Tue, 3/21/17, i erbs wrote: Subject: Re: [Healeys] Last Big Healey? To: "HealeyRick" Cc: "healeys at autox.team.net" Date: Tuesday, March 21, 2017, 11:43 AM Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 Fantastic looking car. Ira Erbs Portland,OR ? ? ? _______? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? _______ ? ???(______ \____1959 BN4____/ _______) ? ? ? ???(_________________________) ? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation? $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -----Inline Attachment Follows----- _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/wjc3 at citlink.net From healeyrik at gmail.com Wed Mar 22 07:42:48 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 22 Mar 2017 09:42:48 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> Double dammit! And the reasons behind his departure stink. The show is too difficult to produce? Amazing how they've managed to do it and do it well all these years. I like that Edd tackles problems that most of us have to deal with. My favorite was putting a new chassis under the Morgan. Rick Neville On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell wrote: > Edd's leaving Wheeler Dealers: > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > -------------------------------- > Bob Spidell - San Jose, CA > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Wed Mar 22 08:12:04 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 22 Mar 2017 07:12:04 -0700 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> So very sorry to read this. Edd And his repairs are the focus of the show. What are they going to focus on now? More Like Brewer yacking on screen? This can't be good. My wife always enjoyed seeing how cars were fixed and Edd is such an easy going guy. Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 22, 2017 3:23 AM, "Bob Spidell" wrote: > Edd's leaving Wheeler Dealers: > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > -------------------------------- > Bob Spidell - San Jose, CA > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jvwojcik at comcast.net Wed Mar 22 08:20:54 2017 From: jvwojcik at comcast.net (Jim Wojcik) Date: Wed, 22 Mar 2017 09:20:54 -0500 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> Agreed. Edd demonstrated what I tried to experience when I pretended to be a mechanic. From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard Collins Sent: Wednesday, March 22, 2017 6:45 AM To: Bob Spidell Cc: healeys Subject: Re: [Healeys] Dammit! One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From jstmorris at yahoo.com Wed Mar 22 08:43:50 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Wed, 22 Mar 2017 14:43:50 +0000 (UTC) Subject: [Healeys] Healey Blue again References: <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> <15aee89b41f-59d9-156bb@webstg-m02.mail.aol.com> Good Day Gerry;? The discussion between Rich Chrysler and Peter Svilans back in 2006 may be of interest.? Hope it helps. --Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives Early Colors - To: "Peter Svilans" , - Subject: Re: Early Colors - From: "Rich C" - Date: Thu, 19 Jan 2006 20:57:57 -0500 Peter, and all,?? This is very interesting. I've personally seen a couple of early Hundreds with what was obviously a plain (non metallic) shade of light grayish blue.? In the meantime having been personally involved in the restoration of Blair Harber's? pre-production Hundred (AHX-14) and the first production car BN1L138031, I can attest to the fact that these two cars had what was immediately recognized as metallic Healey Ice Blue.? This tells me that both the non metallic and the normally recognizable metallic versions were produced from the beginning.?? We also know that Jensens (who painted the bodies) were using at least? Dockers and I.C.I. paints early on.? This fact alone would contribute to varying shades of colour.?? As a further point to confuse, my painter has been experimenting with the Healey Blue metallic shades, and recently showed me a sample spray out card, one side sprayed with a formula we've been happily using for a while now, but just the bare paint, the other half of the sample card oversprayed with a thin coating of clear.? It was amazing how much darker the cleared sample was to the eye.?? It was actually hard to imagine it was the same colour!It is for these many varying reasons that when judging a car in Concours, we first let the owner comment on the colour applied if he/she so chooses, and then when evaluating the colour itself, work on the premise of "a reasonable attempt at accuracy" has been displayed.--Rich Chrysler - To: - Subject: Early Colors - From: "Peter Svilans" - Date: Thu, 19 Jan 2006 11:19:50 -0500 Looking through the color chip library at ?www.AutocolorLibrary.com ??brought up this page:http://autocolorlibrary.com/cgi-bin/search/searchpic.pl?1955-ahmg-pg11.jpg? It shows THREE shades of Healey Blue in use as early as 1957.??? One shade ("H-1 Blue Iridescent") is for 1954, one ("Ice Blue Iridescent") is for later 100's to 1957 (the year of the chip card) and a solid, ie: non-metallic, shade ("Ice? Blue") for the earliest 1953-54 Healeys.? There is also Spruce Green, Carmine Red and Ivory.? I have this same R-M card, and the one shade of blue is definitely non-metallic.What is interesting is that these are not modern recreations of old historic colours, but practical chips meant to repaint cars that were then current, ordinary, on-the-road vehicles.? In other words, 'these shades had better be pretty darn close, or we pay to repaint the customer's car again'.Best regards,? --Peter? On Monday, March 20, 2017 11:24 PM, "gablegerry at netscape.net" wrote: Can anyone tell me is the Healey Blue on a BN6 was a solid color or had specs in it?ThanksGerry _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From ggilliam at usol.com Wed Mar 22 09:01:09 2017 From: ggilliam at usol.com (ggilliam at usol.com) Date: Wed, 22 Mar 2017 11:01:09 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> No point in watching the show now.... Another case where the bean counters think they know more than the technical guys, but guess who will get the blame when the ratings fall? Gordy On 2017-03-21 22:25, Bob Spidell wrote: > Edd's leaving Wheeler Dealers: > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 > > -------------------------------- > Bob Spidell - San Jose, CA -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahbn6 at verizon.net Wed Mar 22 09:28:23 2017 From: ahbn6 at verizon.net (John Sims) Date: Wed, 22 Mar 2017 11:28:23 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> I gave up on the other shows a long time ago. Almost all of them are guys dressed in outlandish garb with tattoos, hairdos, beards, swearing to their help that they are not working hard enough to complete a job with outlandish timelines. The shows are more about them than in the cars. One exception is the girls who have a repair show and they actually show techniques. My other pet peeve is the series Mighty Ships/Mighty Planes and the ilk which skips showing the ships and planes and how they are constructed but zero in on contrived ?problems?. If, for example, they show a B-52 I would rather see the construction process than ?Joe Blow? and his problems in getting a gauge or something to work taking 20 minutes to do it. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Wednesday, March 22, 2017 9:43 AM To: Bob Spidell Cc: healeys Subject: Re: [Healeys] Dammit! Double dammit! And the reasons behind his departure stink. The show is too difficult to produce? Amazing how they've managed to do it and do it well all these years. I like that Edd tackles problems that most of us have to deal with. My favorite was putting a new chassis under the Morgan. Rick Neville On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell wrote: Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Wed Mar 22 10:17:42 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Wed, 22 Mar 2017 16:17:42 +0000 Subject: [Healeys] Dammit! It is no wonder he quit, whenever they computed their "profit" on their flips the poor guy never got paid anything..... ---- i erbs wrote: > So very sorry to read this. Edd > And his repairs are the focus of the show. What are they going to focus on > now? More Like Brewer yacking on screen? > This can't be good. My wife always enjoyed seeing how cars were fixed and > Edd is such an easy going guy. > Ira Erbs > 1959 100-6 > MKI engine and disc brakes > excuse typos and strange words my phone wants you to see. > Portland,OR > > On Mar 22, 2017 3:23 AM, "Bob Spidell" wrote: > > > Edd's leaving Wheeler Dealers: > > > > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > > because-velocity-w-1793498487 > > > > > > -------------------------------- > > Bob Spidell - San Jose, CA > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > > options/healeys/eyera3000 at gmail.com > > > > > > From eyera3000 at gmail.com Wed Mar 22 14:21:30 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 22 Mar 2017 13:21:30 -0700 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> <000c01d2a320$f1f54630$d5dfd290$@verizon.net> Bitchen rides is still about the design and the cars and the crew is not screamed at or attacked, but encouraged and light hearted shop games. I'm pretty tired of fake conflcts And timelines. Eds China is a class act. Will miss him and most likely the show too Its almost driving season round these parts. Today I finish 35 radiation treatments for the return of my cancer. Looking forward to good news and the return of my energy. Cheers Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 22, 2017 11:41 AM, "John Sims" wrote: > I gave up on the other shows a long time ago. Almost all of them are guys > dressed in outlandish garb with tattoos, hairdos, beards, swearing to their > help that they are not working hard enough to complete a job with > outlandish timelines. The shows are more about them than in the cars. One > exception is the girls who have a repair show and they actually show > techniques. My other pet peeve is the series Mighty Ships/Mighty Planes and > the ilk which skips showing the ships and planes and how they are > constructed but zero in on contrived ?problems?. If, for example, they show > a B-52 I would rather see the construction process than ?Joe Blow? and his > problems in getting a gauge or something to work taking 20 minutes to do it. > > > > John Sims > > Aberdeen, NJ > > > > www.healey6.com > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > HealeyRick > *Sent:* Wednesday, March 22, 2017 9:43 AM > *To:* Bob Spidell > *Cc:* healeys > *Subject:* Re: [Healeys] Dammit! > > > > Double dammit! And the reasons behind his departure stink. The show is > too difficult to produce? Amazing how they've managed to do it and do it > well all these years. I like that Edd tackles problems that most of us > have to deal with. My favorite was putting a new chassis under the Morgan. > > > > > Rick Neville > > > > On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell > wrote: > > Edd's leaving Wheeler Dealers: > > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > > -------------------------------- > Bob Spidell - San Jose, CA > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dwflagg at juno.com Wed Mar 22 17:54:39 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Wed, 22 Mar 2017 23:54:39 GMT Subject: [Healeys] Last Big Healey? Steve, We can't do any better than you managing the BJ8 Registry!!! Well done!! Cheers, Doug Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ____________________________________________________________ Actress Maggie Q Shocks With Her Solution To Tummy Troubles activatedyou.com http://thirdpartyoffers.juno.com/TGL3141/58d30efde59cfefd2cecst02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From molony at dodo.com.au Wed Mar 22 18:42:53 2017 From: molony at dodo.com.au (Graeme Molony) Date: Thu, 23 Mar 2017 11:42:53 +1100 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <018101d2a290$80cf3820$826da860$@rr.com> Congratulations Steve, Keep up the good work I'm sure all we Bj8 owners appreciate it. I certainly encourage all of the owners down under that I come across to send you their Info if they haven't already done so. Unfortunately they were never for sale originally in Aust and had to be a special order but there have been lots of imports since and there are a reasonable number of cars here now. Patrick might be able to tell you how many as he was keeping a tally of all of the Healey's in Australia at one stage. Afraid I'm one of the guilty ones having stolen a couple from the US over the years Cheers Graeme M -----Original Message----- From: BJ8Healeys Sent: Wednesday, March 22, 2017 9:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au From ahmg at aol.com Wed Mar 22 18:50:31 2017 From: ahmg at aol.com (Ken Fleming) Date: Wed, 22 Mar 2017 20:50:31 -0400 Subject: [Healeys] Last Big Healey? References: <20170322.195439.19719.0@webmail11.dca.untd.com> I agree Doug! Steve your work is greatly appreciated and hopefully more people will share information with you and recognize the service you provide. Congrats on reaching 50%! I am having beer to celebrate in the garage with my BJ8 and she is having a quart of oil.!!!! We both just raised our drinks to you!! Salute!!! Ken Ken Sent from my iPhone > On Mar 22, 2017, at 7:54 PM, "dwflagg at juno.com" wrote: > > Steve, > > We can't do any better than you managing the BJ8 Registry!!! Well done!! > > Cheers, > > Doug > > > Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. > The last by chassis number was 43026. > The last on the production line was 43000. > The last Metallic Golden Beige was 43025. > The last BRG was 43020. > The last Healey Blue was 43021. > The last Healey Blue/Ivory White was 43023. > The last Ivory White was 43026. > The last Colorado Red was 42971. > All cars from 42991 to 43020 were BRG. > The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. > > This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! > > We could do better if more people would submit the details of their car to the registry. > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett > Sent: Tuesday, March 21, 2017 2:14 PM > To: AH Mail List > Subject: Re: [Healeys] Last Big Healey? > > > The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? > > (The Other) Len > Fairfield, CA, USA > 1967 AH 3000 MkIII, HBJ8L39031 > > > ----- Original Message ----- > From: "Per Schoerner" > To: "HealeyRick" > Cc: > Sent: Tuesday, March 21, 2017 9:01 AM > Subject: Re: [Healeys] Last Big Healey? > > > >I have always thought the last 3000 was a white car. > > > > Per > > > > Skickat fr?n min iPad > > > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : > >> > >> forums > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com > > > > --- > This email has been checked for viruses by AVG. > http://www.avg.com > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/dwflagg at juno.com > > > > ____________________________________________________________ > Actress Maggie Q Shocks With Her Solution To Tummy Troubles > activatedyou.com > http://thirdpartyoffers.juno.com/TGL3142/58d30efde59cfefd2cecst02duc > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ahmg at aol.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kimobriske at gmail.com Wed Mar 22 19:31:09 2017 From: kimobriske at gmail.com (Kimo Briske) Date: Wed, 22 Mar 2017 15:31:09 -1000 Subject: [Healeys] Last Big Healey? References: So how would this car score in Concourse ? With the goal to be as close to original as it left the factory. A fan of originality, Kimo On Tue, Mar 21, 2017 at 2:33 PM, Jean Caron < vintage_roadster_restoration at hotmail.com> wrote: > "Fresh from a restoration done a year ago". I guess that the term " > restoration" is used pretty loosely here. Perhaps saying that it has been > resprayed would have been more accurate but it would not get bidders as > enthusiastic to bring it up even to the lowest estimate. I can see keeping > the original seats to show that "patina" makes sense but the very least > they could have done is install the piping on the aluminum door trim, the > rubber bumpers on the front shroud for the bonnet and the rubber seal for > the trunk actually installed on the trunk lid. At the same time they could > have secured the spare tire at its proper location with the metal bar and > leather belt holding it in place. I am quite amazed that they di install > the fender flash the correct way. > > > Jean > > > ------------------------------ > *From:* Healeys on behalf of HealeyRick < > healeyrik at gmail.com> > *Sent:* March 21, 2017 2:47 PM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Last Big Healey? > > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty. *As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/kimobriske at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Wed Mar 22 19:53:59 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Thu, 23 Mar 2017 01:53:59 +0000 Subject: [Healeys] Last Big Healey? References: , Kimo, While I am no Concours Judge but having built a BJ8 to Concours standards a few years ago as well as having helped a friend bring his car to similar standards, I would say that this car, according to the few photos available from the auction house, would not go beyond the pre-judging phase. There are simply too many details that have been overlooked, things missing, some installed wrong etc. Here are a few examples, the grille surround is not painted where it meets with the back piece, it's left in chrome, the valve cover tags are installed with pop rivets, the rubber bumpers that are installed on the front shroud where it meets with the hood are all missing, the rubber moulding on th front shroud by the carbs is also missing and that is just at the front. Jean ________________________________ From: Kimo Briske Sent: March 23, 2017 1:31 AM To: Jean Caron; Healeys Subject: Re: [Healeys] Last Big Healey? So how would this car score in Concourse ? With the goal to be as close to original as it left the factory. A fan of originality, Kimo "Fresh from a restoration done a year ago". I guess that the term " restoration" is used pretty loosely here. Perhaps saying that it has been resprayed would have been more accurate but it would not get bidders as enthusiastic to bring it up even to the lowest estimate. I can see keeping the original seats to show that "patina" makes sense but the very least they could have done is install the piping on the aluminum door trim, the rubber bumpers on the front shroud for the bonnet and the rubber seal for the trunk actually installed on the trunk lid. At the same time they could have secured the spare tire at its proper location with the metal bar and leather belt holding it in place. I am quite amazed that they di install the fender flash the correct way. Jean ________________________________ Sent: March 21, 2017 2:47 PM Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From p_cquinn at tpg.com.au Wed Mar 22 23:04:37 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Thu, 23 Mar 2017 16:04:37 +1100 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <018101d2a290$80cf3820$826da860$@rr.com> <33586EF20A534FBBBD569D1532295931@msiallinone> Hello Graeme Still keeping the tally. I can tell you that a total of 11 BJ8s were delivered new to Australia and of these one has gone to Japan and ten are still here. A quick look at my records indicate that there are 371 (+ or - some) in Australia now. Hoo Roo Patrick Quinn 1948 Healey Duncan Sports Saloon 1954 Austin-Healey 100 BN3/1 ex-1965 Austin-Healey 3000 BJ8 ex-1966 Austin-Healey 3000 BJ8 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Graeme Molony Sent: Thursday, 23 March 2017 11:43 AM To: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Congratulations Steve, Keep up the good work I'm sure all we Bj8 owners appreciate it. I certainly encourage all of the owners down under that I come across to send you their Info if they haven't already done so. Unfortunately they were never for sale originally in Aust and had to be a special order but there have been lots of imports since and there are a reasonable number of cars here now. Patrick might be able to tell you how many as he was keeping a tally of all of the Healey's in Australia at one stage. Afraid I'm one of the guilty ones having stolen a couple from the US over the years Cheers Graeme M -----Original Message----- From: BJ8Healeys Sent: Wednesday, March 22, 2017 9:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From healeyrik at gmail.com Thu Mar 23 05:40:27 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 07:40:27 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: - We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! *NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars were assembled late in 1967 and another car was built from parts by apprentices in March 1968. This car (43025) was registered to the Donald Healey Motor Company and was, non-negotiably, the last Healey 3000 off the production line."* On Tue, Mar 21, 2017 at 3:43 PM, BJ8Healeys wrote: > HBJ8/43025 was NOT the last one ever made. That hono(u)r goes to > HBJ8/43026, which was not assembled on the regular production line but in > the "Show Shop" three months after regular production ended (it was, and > is, Ivory White). 43025 was not even the last car built on the production > line (which was 43000, built 23 Nov 67 - 11 Jan 68). 43025 *was* the > last car painted Metallic Golden Beige. > > Whoever wrote the description below also got the build date for 43025 > wrong. It was built (per the BMIHT certificate) 1 - 16 November 1967 and > dispatched on 22 November to the Donald Healey Motor Co. Funny that they > would get the build date wrong, since they say the certificate is > available. 43025 did not leave the factory with HS6 carbs. > > > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > [image: TARHEELY license plate] > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > HealeyRick > *Sent:* Tuesday, March 21, 2017 10:47 AM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Last Big Healey? > > > > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > > > [image: Image removed by sender.] > > > Virus-free. www.avg.com > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 19755 bytes Desc: not available URL: From per at schoerner.se Thu Mar 23 06:15:27 2017 From: per at schoerner.se (Per Schoerner) Date: Thu, 23 Mar 2017 13:15:27 +0100 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: > > We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! > > NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Thu Mar 23 06:29:16 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 08:29:16 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Cc: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone 23 mars 2017 kl. 12:40 skrev HealeyRick : The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From josef-eckert at t-online.de Thu Mar 23 07:58:33 2017 From: josef-eckert at t-online.de (josef-eckert at t-online.de) Date: Thu, 23 Mar 2017 14:58:33 +0100 (MET) Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> "Alternative Facts" This is comon these days. You need to accept that. Josef Eckert Konigswinter/Germany -----Original-Nachricht----- Betreff: Re: [Healeys] Last Big Healey? Datum: 2017-03-23T13:35:15+0100 Von: "HealeyRick" An: "BJ8Healeys" The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: * We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars were assembled late in 1967 and another car was built from parts by apprentices in March 1968. This car (43025) was registered to the Donald Healey Motor Company and was, non-negotiably, the last Healey 3000 off the production line." On Tue, Mar 21, 2017 at 3:43 PM, BJ8Healeys From sbyers at ec.rr.com Thu Mar 23 08:15:58 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 10:15:58 -0400 Subject: [Healeys] Last Big Healey? References: <20170322.195439.19719.0@webmail11.dca.untd.com> Many thanks to all of you for the kind words. Building and maintaining the registry and using it for the benefit of the Healey community in general and of BJ8 owners in particular has been fun for me, and has given me plenty to do to keep me out of trouble in retirement. I have received immense satisfaction from the positive benefits and unique service the registry has been able to provide for specific owners over the last 19 years. Although I enter the data and manage the registry, I certainly could never have been able to capture information on 50% of total production by myself. I have been very fortunate to acquire many e-mail friends around the world who believe in the goals of the registry and support it by feeding me information on BJ8s they come across and links to sales on the internet. There are far too many to mention by name, and my sincere thanks and appreciation to all of them, but some stand out and I would like to recognize them especially: - Richard Vaughan, who has spent countless days of his own time researching for me in the BMIHT archives for the last 15 years or so in order to document the original build details of thousands of BJ8s that would otherwise have been unavailable on a mass basis (and free!). - Niels Bengaard for scanning the internet daily for 7 years and sending me links, current and historical, and also for specific information about BJ8s in his part of Scandinavia. - Mell Ward, for sharing her UK 3000 registry with me (BJ8 portion, and minus personal data, of course) - Patrick Quinn for helping me to account for and keep up with all the BJ8s in Australia. - Mark Donaldson for covering the territory in New Zealand. - George and Nathan Bennett for sharing their personal historical databases and keeping me apprised of internet links. - Iain Torrance for making sure that I am aware of BJ8 sales in the UK. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Ken Fleming [mailto:ahmg at aol.com] Sent: Wednesday, March 22, 2017 8:51 PM To: dwflagg at juno.com Cc: sbyers at ec.rr.com; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I agree Doug! Steve your work is greatly appreciated and hopefully more people will share information with you and recognize the service you provide. Congrats on reaching 50%! I am having beer to celebrate in the garage with my BJ8 and she is having a quart of oil.!!!! We both just raised our drinks to you!! Salute!!! Ken Ken Sent from my iPhone On Mar 22, 2017, at 7:54 PM, "dwflagg at juno.com" wrote: Steve, We can't do any better than you managing the BJ8 Registry!!! Well done!! Cheers, Doug Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ____________________________________________________________ Actress Maggie Q Shocks With Her Solution To Tummy Troubles activatedyou.com http://thirdpartyoffers.juno.com/TGL3142/58d30efde59cfefd2cecst02duc Image removed by sender. SponsoredBy Content.Ad _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ~WRD395.jpg Type: image/jpeg Size: 823 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From healeyrik at gmail.com Thu Mar 23 08:24:38 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 10:24:38 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Steve, Good of you to try and set the record straight. I can't imagine an auction buyer geting what he thinks is "the last one" would be too happy finding out that it isn't. Like the various claims of 100Ms and LeMans cars, I guess it's *caveat emptor.* BTW, did you happen to notice this BJ8 with the "different" engine paint on BaT: http://bringatrailer.com/listing/1967-austin-healey-3000-bj8-mk-iii-2/ Best, Rick On Thu, Mar 23, 2017 at 8:29 AM, BJ8Healeys wrote: > Yes, that much would be correct. However, after the statement quoted > below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone > Auctions preparing catalogue entries and helping to sort out the inevitable > mistakes that occur when a dozen or so people are under pressure to close a > catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 > with a competition history,(which I bought in 1966), so as a 'Marque' > enthusiast, I am as keen as you to ensure that what we commit to paper is > accurate. I have read ------------ response to you and it's patently > completely inaccurate, however, he does not claim to know what he is > talking about, and is too young to remember the ins and outs of the Donald > Healey Motor Company. In fairness, having had a quick look at our vendor's > 'Entry Form' there are a number of claims on there which Richard took at > face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, > but we can change the Website and issue a 'Saleroom Notice' prior to the > auction. > > I propose that I have a good look at the information provided to us by the > vendor and form some opinions. I will share these with you and see what you > think. It's patently obvious that you have considerable knowledge of the > subject and, I guess, we will be guided by you, but as I said, it appears > the vendor is under the impression that what he has told us is correct and > the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he > claimed, then we may have to revise the 'monetary value', which may not go > down too well, but, given your information, we are obliged to correct any > statements we have made and we are keen to ensure a happy purchaser on the > day. > > I will deal with this from now on and if you can give me 24 hours, I will > get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* Per Schoerner [mailto:per at schoerner.se] > *Sent:* Thursday, March 23, 2017 8:15 AM > *Cc:* BJ8Healeys; healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the > production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion > that this was the last one off the line: > > > > ? We don't want to 'labour the point' but this is the LAST big > Healey off the line - ever!!! > > > *NB: We are aware of the three cars assembled after Chassis 43025. When > the production line was stopped, a further two cars * > > > > [image: Image removed by sender.] > > > Virus-free. www.avg.com > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From sbyers at ec.rr.com Thu Mar 23 09:04:58 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 11:04:58 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Rick obviously, the registry data can be beneficial to a potential buyer but possibly not so beneficial to a seller. It is not the intention to favor either one, but having seen a lot of BJ8s offered for sale with some really wild statements, whenever I can offer proof to refute those I will do so. Sometimes owners are happy to learn the truth about their car, and sometimes they don't want to hear it, but it is what it is. I did see the bringatrailer ad for 38307. The color on the valve cover is not exactly "Healey engine green", but close enough to make one wonder whether it is original. It appears to have been painted long ago, but anything could have happened in the last 50 years, including a repaint. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: HealeyRick [mailto:healeyrik at gmail.com] Sent: Thursday, March 23, 2017 10:25 AM To: BJ8Healeys Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Steve, Good of you to try and set the record straight. I can't imagine an auction buyer geting what he thinks is "the last one" would be too happy finding out that it isn't. Like the various claims of 100Ms and LeMans cars, I guess it's caveat emptor. BTW, did you happen to notice this BJ8 with the "different" engine paint on BaT: http://bringatrailer.com/listing/1967-austin-healey-3000-bj8-mk-iii-2/ Best, Rick -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Thu Mar 23 09:07:04 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 11:07:04 -0400 Subject: [Healeys] FW: Last Big Healey? Sorry, I miss-typed: the car in the ad is 38507. Steve From: BJ8Healeys [mailto:sbyers at ec.rr.com] Sent: Thursday, March 23, 2017 11:05 AM To: 'healeys at autox.team.net' Subject: RE: [Healeys] Last Big Healey? Rick obviously, the registry data can be beneficial to a potential buyer but possibly not so beneficial to a seller. It is not the intention to favor either one, but having seen a lot of BJ8s offered for sale with some really wild statements, whenever I can offer proof to refute those I will do so. Sometimes owners are happy to learn the truth about their car, and sometimes they don't want to hear it, but it is what it is. I did see the bringatrailer ad for 38307. The color on the valve cover is not exactly "Healey engine green", but close enough to make one wonder whether it is original. It appears to have been painted long ago, but anything could have happened in the last 50 years, including a repaint. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 23 09:34:47 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 23 Mar 2017 16:34:47 +0100 (CET) Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 23, 2017 at 1:29 PM BJ8Healeys wrote: > > > Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. > > I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. > > I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > From: Per Schoerner [mailto:per at schoerner.se] > Sent: Thursday, March 23, 2017 8:15 AM > Cc: BJ8Healeys; healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > > > > > The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: > > > > > > > > ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! > > > > > > NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Thu Mar 23 14:11:34 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 16:11:34 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell wrote: > Am I the only one that thinks this car being 'the last of ... whatever' > adds no particular cachet? I'd rather have a well-preserved, low-mileage > survivor--with rough but original paint--or a top-of-the-line concours > resto, in the middle of the production pack. But, my cars are for driving, > not bragging rights (well, except for the 'M'). > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > On March 23, 2017 at 1:29 PM BJ8Healeys wrote: > > Yes, that much would be correct. However, after the statement quoted > below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone > Auctions preparing catalogue entries and helping to sort out the inevitable > mistakes that occur when a dozen or so people are under pressure to close a > catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 > with a competition history,(which I bought in 1966), so as a 'Marque' > enthusiast, I am as keen as you to ensure that what we commit to paper is > accurate. I have read ------------ response to you and it's patently > completely inaccurate, however, he does not claim to know what he is > talking about, and is too young to remember the ins and outs of the Donald > Healey Motor Company. In fairness, having had a quick look at our vendor's > 'Entry Form' there are a number of claims on there which Richard took at > face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, > but we can change the Website and issue a 'Saleroom Notice' prior to the > auction. > > I propose that I have a good look at the information provided to us by the > vendor and form some opinions. I will share these with you and see what you > think. It's patently obvious that you have considerable knowledge of the > subject and, I guess, we will be guided by you, but as I said, it appears > the vendor is under the impression that what he has told us is correct and > the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he > claimed, then we may have to revise the 'monetary value', which may not go > down too well, but, given your information, we are obliged to correct any > statements we have made and we are keen to ensure a happy purchaser on the > day. > > I will deal with this from now on and if you can give me 24 hours, I will > get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* Per Schoerner [mailto:per at schoerner.se] > *Sent:* Thursday, March 23, 2017 8:15 AM > *Cc:* BJ8Healeys; healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the > production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion > that this was the last one off the line: > > > > ? We don't want to 'labour the point' but this is the LAST big > Healey off the line - ever!!! > > > *NB: We are aware of the three cars assembled after Chassis 43025. When > the production line was stopped, a further two cars * > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Thu Mar 23 14:34:53 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Thu, 23 Mar 2017 20:34:53 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com>, <1252613880.358563.1490283288193@connect.xfinity.com> I agree 100%. I just hit 90k miles on my BN7 with a red engine block, gold valve cover, red seats with dark brown and black interior, said to be one of the first 10 of BN7 out of the U.K. Everything works, I drive it on the street and occasionally on a track and get great pleasure from it. My 89 turbo Porsche 930 has gotten too valuable to drive in many instances and stays on my lift way too much; not so with my Healey ! Regards, Richard C BN 7 440 Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From thehartnetts at earthlink.net Thu Mar 23 15:09:10 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Thu, 23 Mar 2017 14:09:10 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <031001d2a3e6$d6df2700$849d7500$@rr.com> Re: the bringatrailer ad for 38507. My BJ8, only a relatively few cars later, has flex down-pipes, two mufflers and two resonators across the back with the exhaust coming out on the right (as opposed to 'left', not 'wrong') side. Looking at Moss, it would appear that the installed system is for a BN4 - BJ7. I guess that this was a choice by the PO? What is the switch on the dash next to the glove compartment for? I do not recall ever seeing a similar one. Standard option or something added by the PO? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 23 16:35:29 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 23 Mar 2017 15:35:29 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> I think a Steve Mcqueen car would be worth more. No one cooler than Mcqueen Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: > Good point, Bob. So many of the things in the car hobby that are supposed > to add value to a car don't make a lot of sense. What makes a car with > "matching numbers" more valuable than one with a replaced engine built to > the same specification? Cars at the beginning or end of production, why > are they more valuable? Cars owned by celebrities, who cares what famous > butt sat in the driver's seat? And of course, no offense, why is a factory > 100M so much more valuable than one fitted with a LeMans kit (can it be the > hi-comp pistons?) As Steve (and the greatest football coach of all time) > say, it is what it is. > > Rick Neville > > On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell > wrote: > >> Am I the only one that thinks this car being 'the last of ... whatever' >> adds no particular cachet? I'd rather have a well-preserved, low-mileage >> survivor--with rough but original paint--or a top-of-the-line concours >> resto, in the middle of the production pack. But, my cars are for driving, >> not bragging rights (well, except for the 'M'). >> >> >> Bob >> >> -------------------------------- >> Bob Spidell - San Jose, CA >> >> On March 23, 2017 at 1:29 PM BJ8Healeys wrote: >> >> Yes, that much would be correct. However, after the statement quoted >> below, I received this from another source at the auction house: >> >> -------------------------- >> >> Steve , Good Afternoon. >> >> >> >> My name is ??????---------- and I do quite a lot of work for Silverstone >> Auctions preparing catalogue entries and helping to sort out the inevitable >> mistakes that occur when a dozen or so people are under pressure to close a >> catalogue with 200 cars. >> >> I am 67 and have owned a number of big Healeys including an early 100/4 >> with a competition history,(which I bought in 1966), so as a 'Marque' >> enthusiast, I am as keen as you to ensure that what we commit to paper is >> accurate. I have read ------------ response to you and it's patently >> completely inaccurate, however, he does not claim to know what he is >> talking about, and is too young to remember the ins and outs of the Donald >> Healey Motor Company. In fairness, having had a quick look at our vendor's >> 'Entry Form' there are a number of claims on there which Richard took at >> face value but which now may be incorrect. >> >> The CCA catalogue has now been printed so it's too late to change that, >> but we can change the Website and issue a 'Saleroom Notice' prior to the >> auction. >> >> I propose that I have a good look at the information provided to us by >> the vendor and form some opinions. I will share these with you and see what >> you think. It's patently obvious that you have considerable knowledge of >> the subject and, I guess, we will be guided by you, but as I said, it >> appears the vendor is under the impression that what he has told us is >> correct and the team were excited to be handling a car with such provenance. >> >> If it appears that the car, although a stunning example, is not what he >> claimed, then we may have to revise the 'monetary value', which may not go >> down too well, but, given your information, we are obliged to correct any >> statements we have made and we are keen to ensure a happy purchaser on the >> day. >> >> I will deal with this from now on and if you can give me 24 hours, I will >> get back to you with as much information as I can find at this end. >> >> >> >> Thank you for your interest in this matter. >> >> >> >> --------------------------------- >> >> Steve Byers >> >> HBJ8L/36666 >> >> BJ8 Registry >> >> AHCA Delegate at Large >> >> Havelock, NC >> >> >> >> >> >> *From:* Per Schoerner [mailto:per at schoerner.se] >> *Sent:* Thursday, March 23, 2017 8:15 AM >> *Cc:* BJ8Healeys; healeys at autox.team.net >> *Subject:* Re: [Healeys] Last Big Healey? >> >> >> >> Let's accept then that this is the highest vin number that left the >> production line. >> >> >> >> Best, Per >> >> Skickat fr?n min iPhone >> >> >> 23 mars 2017 kl. 12:40 skrev HealeyRick : >> >> The ad has been updated, but the sellers are sticking to their assertion >> that this was the last one off the line: >> >> >> >> ? We don't want to 'labour the point' but this is the LAST big >> Healey off the line - ever!!! >> >> >> *NB: We are aware of the three cars assembled after Chassis 43025. When >> the production line was stopped, a further two cars * >> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/healeyrik at gmail.com >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 23 16:36:22 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 23 Mar 2017 15:36:22 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> and of course a Donald Healey owned car would be worth more Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 3:35 PM, i erbs wrote: > I think a Steve Mcqueen car would be worth more. > No one cooler than Mcqueen > > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: > >> Good point, Bob. So many of the things in the car hobby that are >> supposed to add value to a car don't make a lot of sense. What makes a car >> with "matching numbers" more valuable than one with a replaced engine built >> to the same specification? Cars at the beginning or end of production, why >> are they more valuable? Cars owned by celebrities, who cares what famous >> butt sat in the driver's seat? And of course, no offense, why is a factory >> 100M so much more valuable than one fitted with a LeMans kit (can it be the >> hi-comp pistons?) As Steve (and the greatest football coach of all time) >> say, it is what it is. >> >> Rick Neville >> >> On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell >> wrote: >> >>> Am I the only one that thinks this car being 'the last of ... whatever' >>> adds no particular cachet? I'd rather have a well-preserved, low-mileage >>> survivor--with rough but original paint--or a top-of-the-line concours >>> resto, in the middle of the production pack. But, my cars are for driving, >>> not bragging rights (well, except for the 'M'). >>> >>> >>> Bob >>> >>> -------------------------------- >>> Bob Spidell - San Jose, CA >>> >>> On March 23, 2017 at 1:29 PM BJ8Healeys wrote: >>> >>> Yes, that much would be correct. However, after the statement quoted >>> below, I received this from another source at the auction house: >>> >>> -------------------------- >>> >>> Steve , Good Afternoon. >>> >>> >>> >>> My name is ??????---------- and I do quite a lot of work for Silverstone >>> Auctions preparing catalogue entries and helping to sort out the inevitable >>> mistakes that occur when a dozen or so people are under pressure to close a >>> catalogue with 200 cars. >>> >>> I am 67 and have owned a number of big Healeys including an early 100/4 >>> with a competition history,(which I bought in 1966), so as a 'Marque' >>> enthusiast, I am as keen as you to ensure that what we commit to paper is >>> accurate. I have read ------------ response to you and it's patently >>> completely inaccurate, however, he does not claim to know what he is >>> talking about, and is too young to remember the ins and outs of the Donald >>> Healey Motor Company. In fairness, having had a quick look at our vendor's >>> 'Entry Form' there are a number of claims on there which Richard took at >>> face value but which now may be incorrect. >>> >>> The CCA catalogue has now been printed so it's too late to change that, >>> but we can change the Website and issue a 'Saleroom Notice' prior to the >>> auction. >>> >>> I propose that I have a good look at the information provided to us by >>> the vendor and form some opinions. I will share these with you and see what >>> you think. It's patently obvious that you have considerable knowledge of >>> the subject and, I guess, we will be guided by you, but as I said, it >>> appears the vendor is under the impression that what he has told us is >>> correct and the team were excited to be handling a car with such provenance. >>> >>> If it appears that the car, although a stunning example, is not what he >>> claimed, then we may have to revise the 'monetary value', which may not go >>> down too well, but, given your information, we are obliged to correct any >>> statements we have made and we are keen to ensure a happy purchaser on the >>> day. >>> >>> I will deal with this from now on and if you can give me 24 hours, I >>> will get back to you with as much information as I can find at this end. >>> >>> >>> >>> Thank you for your interest in this matter. >>> >>> >>> >>> --------------------------------- >>> >>> Steve Byers >>> >>> HBJ8L/36666 >>> >>> BJ8 Registry >>> >>> AHCA Delegate at Large >>> >>> Havelock, NC >>> >>> >>> >>> >>> >>> *From:* Per Schoerner [mailto:per at schoerner.se] >>> *Sent:* Thursday, March 23, 2017 8:15 AM >>> *Cc:* BJ8Healeys; healeys at autox.team.net >>> *Subject:* Re: [Healeys] Last Big Healey? >>> >>> >>> >>> Let's accept then that this is the highest vin number that left the >>> production line. >>> >>> >>> >>> Best, Per >>> >>> Skickat fr?n min iPhone >>> >>> >>> 23 mars 2017 kl. 12:40 skrev HealeyRick : >>> >>> The ad has been updated, but the sellers are sticking to their assertion >>> that this was the last one off the line: >>> >>> >>> >>> ? We don't want to 'labour the point' but this is the LAST big >>> Healey off the line - ever!!! >>> >>> >>> *NB: We are aware of the three cars assembled after Chassis 43025. When >>> the production line was stopped, a further two cars * >>> >>> >>> >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: http://autox.team.net/mailman/ >>> options/healeys/healeyrik at gmail.com >>> >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Thu Mar 23 17:50:57 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Thu, 23 Mar 2017 23:50:57 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com>, I am of the opinion that all these items like matching numbers, first off the line, last one built etc. are nothing but auction lexicon to try to get more money for a car they have on consignment and therefore make more money for the sometimes 5 minutes they spend selling a particular vehicle. There is little doubt, getting a catalogue ready for a sale is no small task, then getting the car at the site, the paperwork afterwards etc, it all cost something but since most well know auction house get 10% from the seller and the buyer, there is a lot of money at stake for them and the few key words they can add to attract a buyer, they'll do it to create a market. Jean ________________________________ From: Healeys on behalf of HealeyRick Sent: March 23, 2017 8:11 PM To: Bob Spidell Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC Sent: Thursday, March 23, 2017 8:15 AM Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: * We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From amalin at mac.com Thu Mar 23 18:26:09 2017 From: amalin at mac.com (Al Malin) Date: Thu, 23 Mar 2017 20:26:09 -0400 Subject: [Healeys] Toe-in For a Tricarb the manual calls for 1/16 inch to 1/8 inch toe-in. Do these values change for radial tires? Al Malin Tricarb From dwflagg at juno.com Thu Mar 23 18:54:22 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Fri, 24 Mar 2017 00:54:22 GMT Subject: [Healeys] Last Big Healey? Especially the chase scene from "Bullit"!! I think a Steve Mcqueen car would be worth more.No one cooler than Mcqueen Ira ErbsPortland,OR _______ _______ (______ \\____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario AndrettiPlease excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell wrote: Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob-------------------------------- Bob Spidell - San Jose, CAOn March 23, 2017 at 1:29 PM BJ8Healeys wrote: Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house:--------------------------Steve , Good Afternoon. My name is ­­­­­­---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars.I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect.The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction.I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance.If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day.I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. ---------------------------------Steve ByersHBJ8L/36666BJ8 RegistryAHCA Delegate at LargeHavelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Cc: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone 23 mars 2017 kl. 12:40 skrev HealeyRick :The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyrik at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com ____________________________________________________________ Cameraman For Sure Got Fired Over This! [23 Photos] buzzcelebrities.com http://thirdpartyoffers.juno.com/TGL3141/58d46e9d81d836e9d619fst02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Thu Mar 23 20:45:31 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 22:45:31 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <031001d2a3e6$d6df2700$849d7500$@rr.com> And now the ad has been changed again to "This is one of the LAST!! Healey 3000s off the Austin-Healey production line (December 1967)" and "The last 3000 ever to be finished in Golden Beige Metallic" Rick Neville On Thu, Mar 23, 2017 at 11:04 AM, BJ8Healeys wrote: > Rick obviously, the registry data can be beneficial to a potential buyer > but possibly not so beneficial to a seller. It is not the intention to > favor either one, but having seen a lot of BJ8s offered for sale with some > really wild statements, whenever I can offer proof to refute those I will > do so. Sometimes owners are happy to learn the truth about their car, and > sometimes they don't want to hear it, but it is what it is. > > > > I did see the bringatrailer ad for 38307. The color on the valve cover is > not exactly "Healey engine green", but close enough to make one wonder > whether it is original. It appears to have been painted long ago, but > anything could have happened in the last 50 years, including a repaint. > > > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* HealeyRick [mailto:healeyrik at gmail.com] > *Sent:* Thursday, March 23, 2017 10:25 AM > *To:* BJ8Healeys > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Steve, > > > > Good of you to try and set the record straight. I can't imagine an > auction buyer geting what he thinks is "the last one" would be too happy > finding out that it isn't. Like the various claims of 100Ms and LeMans > cars, I guess it's *caveat emptor.* > > > > BTW, did you happen to notice this BJ8 with the "different" engine paint > on BaT: http://bringatrailer.com/listing/1967-austin-healey- > 3000-bj8-mk-iii-2/ > > > > Best, > > Rick > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kentmclean at comcast.net Fri Mar 24 06:19:36 2017 From: kentmclean at comcast.net (Kent McLean) Date: Fri, 24 Mar 2017 08:19:36 -0400 Subject: [Healeys] Dammit! References: Ira Erbs wrote: > Today I finish 35 radiation > treatments for the return of my cancer. Looking forward to good news and > the return of my energy. There are worse things than Edd China leaving a great show. May your doctors succeed in giving you the ?Edd China? treatment, bringing a sick old body back to new. - Kent McLean ?56 100 BN2 From pdzwig at summaventures.com Fri Mar 24 06:47:24 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Fri, 24 Mar 2017 12:47:24 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> While originality has a value, it is all in the eye of the beholder. If a car belonged to, say, Steve McQueen and you have all the documentation going back to when it was sold to him then it has provenance and provably so: what you are prepared to pay for that is up to you. Previous ownership depends on your taste, after all Hitler's Mercedes found a buyer. I wouldn't want it. Consider race cars and rally Healeys which command probably the highest premiums of all. Most cars were modified or rebuilt after each event and throughout the period in which they were campaigned in line with changing technologies and in some cases rules. As a result they have very few bits that were in place when they rolled off the production line. Yes the parts were fitted by a BL engineer/technician but everyone on this list knows what that can mean! That doesn't prevent them from being "authentic". Such a car cannot be considered to be "original" in that it doesn't have the same components with which it left the factory. A very interesting case concerns the Bentley widely known as "Old Number One" in which the originality and "genuineness" of the car and its value were in dispute and which ended up in a twelve-day trial. The judgement is here: http://www.gomog.com/articles/no1judgement.html As far as I am aware it hasn't been superceded in English Law. It's probably also in several other places too. It's very interesting and well worth a read. Peter On 23/03/2017 23:50, Jean Caron wrote: > I am of the opinion that all these items like matching numbers, first off the > line, last one built etc. are nothing but auction lexicon to try to get more > money for a car they have on consignment and therefore make more money for the > sometimes 5 minutes they spend selling a particular vehicle. > > There is little doubt, getting a catalogue ready for a sale is no small task, > then getting the car at the site, the paperwork afterwards etc, it all cost > something but since most well know auction house get 10% from the seller and the > buyer, there is a lot of money at stake for them and the few key words they can > add to attract a buyer, they'll do it to create a market. > > > Jean > > > > -------------------------------------------------------------------------------- > *From:* Healeys on behalf of HealeyRick > > *Sent:* March 23, 2017 8:11 PM > *To:* Bob Spidell > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > Good point, Bob. So many of the things in the car hobby that are supposed to > add value to a car don't make a lot of sense. What makes a car with "matching > numbers" more valuable than one with a replaced engine built to the same > specification? Cars at the beginning or end of production, why are they more > valuable? Cars owned by celebrities, who cares what famous butt sat in the > driver's seat? And of course, no offense, why is a factory 100M so much more > valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As > Steve (and the greatest football coach of all time) say, it is what it is. > > Rick Neville > > On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell > __ > > Am I the only one that thinks this car being 'the last of ... whatever' adds > no particular cachet? I'd rather have a well-preserved, low-mileage > survivor--with rough but original paint--or a top-of-the-line concours > resto, in the middle of the production pack. But, my cars are for driving, > not bragging rights (well, except for the 'M'). > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > >> On March 23, 2017 at 1:29 PM BJ8Healeys > >> Yes, that much would be correct. However, after the statement quoted >> below, I received this from another source at the auction house: >> >> -------------------------- >> >> Steve , Good Afternoon. >> >> >> >> My name is ??????---------- and I do quite a lot of work for Silverstone >> Auctions preparing catalogue entries and helping to sort out the >> inevitable mistakes that occur when a dozen or so people are under >> pressure to close a catalogue with 200 cars. >> >> I am 67 and have owned a number of big Healeys including an early 100/4 >> with a competition history,(which I bought in 1966), so as a 'Marque' >> enthusiast, I am as keen as you to ensure that what we commit to paper is >> accurate. I have read ------------ response to you and it's patently >> completely inaccurate, however, he does not claim to know what he is >> talking about, and is too young to remember the ins and outs of the Donald >> Healey Motor Company. In fairness, having had a quick look at our vendor's >> 'Entry Form' there are a number of claims on there which Richard took at >> face value but which now may be incorrect. >> >> The CCA catalogue has now been printed so it's too late to change that, >> but we can change the Website and issue a 'Saleroom Notice' prior to the >> auction. >> >> I propose that I have a good look at the information provided to us by the >> vendor and form some opinions. I will share these with you and see what >> you think. It's patently obvious that you have considerable knowledge of >> the subject and, I guess, we will be guided by you, but as I said, it >> appears the vendor is under the impression that what he has told us is >> correct and the team were excited to be handling a car with such provenance. >> >> If it appears that the car, although a stunning example, is not what he >> claimed, then we may have to revise the 'monetary value', which may not go >> down too well, but, given your information, we are obliged to correct any >> statements we have made and we are keen to ensure a happy purchaser on the >> day. >> >> I will deal with this from now on and if you can give me 24 hours, I will >> get back to you with as much information as I can find at this end. >> >> >> >> Thank you for your interest in this matter. >> >> >> >> --------------------------------- >> >> Steve Byers >> >> HBJ8L/36666 >> >> BJ8 Registry >> >> AHCA Delegate at Large >> >> Havelock, NC >> >> >> >> >> >> *Sent:* Thursday, March 23, 2017 8:15 AM >> *Subject:* Re: [Healeys] Last Big Healey? >> >> >> >> Let's accept then that this is the highest vin number that left the >> production line. >> >> >> >> Best, Per >> >> Skickat fr?n min iPhone >> >> >> 23 mars 2017 kl. 12:40 skrev HealeyRick > >> The ad has been updated, but the sellers are sticking to their >> assertion that this was the last one off the line: >> >> >> >> ? We don't want to 'labour the point' but this is the LAST big >> Healey off the line - ever!!! >> >> >> /NB: We are aware of the three cars assembled after Chassis 43025. >> When the production line was stopped, a further two cars / >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeyrik at gmail.com > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/pdzwig at summaventures.com > -- =========================================================== Dr Peter Dzwig From eyera3000 at gmail.com Fri Mar 24 09:46:01 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 08:46:01 -0700 Subject: [Healeys] Dammit! References: lovely. well played. appreciate the good wishes Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 24, 2017 at 5:19 AM, Kent McLean wrote: > Ira Erbs wrote: > > Today I finish 35 radiation > > treatments for the return of my cancer. Looking forward to good news and > > the return of my energy. > > There are worse things than Edd China leaving a great show. May your > doctors succeed in giving you the ?Edd China? treatment, bringing a sick > old body back to new. > > - > Kent McLean > ?56 100 BN2 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Fri Mar 24 10:27:42 2017 From: goldengt at cal.net (goldengt) Date: Fri, 24 Mar 2017 09:27:42 -0700 Subject: [Healeys] Road spring tool Anyone found a reasonably priced tool similar to the factory one for compressing the front springs? I/we am getting better with 4 theaded rods, but still would like to buy a new tool.?Ken Freese?65 single plastic light phase 2 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Fri Mar 24 10:27:42 2017 From: goldengt at cal.net (goldengt) Date: Fri, 24 Mar 2017 09:27:42 -0700 Subject: [Healeys] Road spring tool Anyone found a reasonably priced tool similar to the factory one for compressing the front springs? I/we am getting better with 4 theaded rods, but still would like to buy a new tool.?Ken Freese?65 single plastic light phase 2 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From rchaskell at earthlink.net Fri Mar 24 12:42:37 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Fri, 24 Mar 2017 14:42:37 -0400 Subject: [Healeys] Road spring tool References: Ken, I've always used just two threaded rods, placed diagonally. For one set, I pinned a nut on one end of each rods. I've not run across the factory tool, Churchill 18G37. Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/24/2017 12:27 PM, goldengt wrote: > Anyone found a reasonably priced tool similar to the factory one for > compressing the front springs? I/we am getting better with 4 theaded > rods, but still would like to buy a new tool. > Ken Freese > 65 single plastic light phase 2 > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From eyera3000 at gmail.com Fri Mar 24 12:48:23 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 11:48:23 -0700 Subject: [Healeys] Moment Anderson book on ebay currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg&vxp=mtr Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: From rrengineer.mike at att.net Fri Mar 24 15:18:31 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Fri, 24 Mar 2017 21:18:31 +0000 (UTC) Subject: [Healeys] Moment Anderson book on ebay References: Never mind that.? Look at the other one at the middle of the page for a buy it now of $420.00!Mike MacLean On Friday, March 24, 2017 1:22 PM, i erbs wrote: currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg&vxp=mtr ? Ira ErbsPortland,OR? ? ? _______ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?_______ ? ?? (______ \____1959 BN4____/ _______) ? ? ? ?? (_________________________)? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words_______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Fri Mar 24 15:31:56 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 14:31:56 -0700 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> I posted it because of the absurd prices and thought if someone really needed a copy here was one that was just expensive at $195.00 Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 24, 2017 at 2:18 PM, Michael MacLean wrote: > Never mind that. Look at the other one at the middle of the page for a > buy it now of $420.00! > Mike MacLean > > > On Friday, March 24, 2017 1:22 PM, i erbs wrote: > > > currently at $195.00 > > http://www.ebay.com/itm/Austin-Healey-RESTORATION- > GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g: > DyAAAOSwtfhYn5Fg&vxp=mtr > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/rrengineer.mike at att.net > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Fri Mar 24 20:40:27 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Fri, 24 Mar 2017 22:40:27 -0400 Subject: [Healeys] Phenolic spacers I am reinstalling the H6 carbs after rebuilding them and I hope to wrap up everything tomorrow. The Moss kit came with two phenolic spacers about 3/8" thick that mount to the outer face of the carburetor bodies, assumedly between the face and the air cleaners. My car is a Le Mans and cold air box was mounted directly to the carbs without any blocks. Using them would make it just that much more difficult to get the cold air box and the hose and hose adaptor in place. It would also result in the fuel bowl overflow tubes not reaching the grommeted holes in the box. What function do the blocks serve, are they normally found when CAB's are mounted (as opposed to air cleaners) and if so what harm might be caused by not using them? -------------- next part -------------- An HTML attachment was scrubbed... URL: From gturl at sympatico.ca Fri Mar 24 21:55:24 2017 From: gturl at sympatico.ca (gturl gturl) Date: Fri, 24 Mar 2017 23:55:24 -0400 (EDT) Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Sat Mar 25 01:08:16 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 00:08:16 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> Shouldn?t be. It?s not like you are torqueing the head. John Spaur ?62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of gturl gturl Sent: Friday, March 24, 2017 8:55 PM To: healeys at autox.team.net Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine Is there a preferred sequence for tightening the bolts holding the rocker shaft pedestals to the head? Thanks in advance.. Geoff Turl -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Sat Mar 25 01:24:47 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 00:24:47 -0700 Subject: [Healeys] Road spring tool References: <58D5689D.1070700@earthlink.net> Tried and true method. Used it many times over the years. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Haskell Sent: Friday, March 24, 2017 11:43 AM To: goldengt ; Austin Healey List Subject: Re: [Healeys] Road spring tool Ken, I've always used just two threaded rods, placed diagonally. For one set, I pinned a nut on one end of each rods. I've not run across the factory tool, Churchill 18G37. Cheers, Bob Haskell From rchaskell at earthlink.net Sat Mar 25 05:48:07 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Sat, 25 Mar 2017 07:48:07 -0400 Subject: [Healeys] Phenolic spacers References: Michael, The the phenolic spacers are insulators. On other cars they would be installed between the manifold and the heat shield and/or the heat shield and the carbs. But these match the CAB side of the carb body, not the manifold side? Interesting. Not much help, sorry. Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/24/2017 10:40 PM, Michael Oritt wrote: > I am reinstalling the H6 carbs after rebuilding them and I hope to wrap > up everything tomorrow. The Moss kit came with two phenolic spacers > about 3/8" thick that mount to the outer face of the carburetor bodies, > assumedly between the face and the air cleaners. > > My car is a Le Mans and cold air box was mounted directly to the carbs > without any blocks. Using them would make it just that much more > difficult to get the cold air box and the hose and hose adaptor in > place. It would also result in the fuel bowl overflow tubes not reaching > the grommeted holes in the box. > > What function do the blocks serve, are they normally found when CAB's > are mounted (as opposed to air cleaners) and if so what harm might be > caused by not using them? > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From michael.oritt at gmail.com Sat Mar 25 08:00:49 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 10:00:49 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> Bob-- To clarify, the kit came with four phenolic blocks or spacers. Two are square with scalloped sides and four holes and mount between the carbs and the intake manifold face. Two more are diamond shaped with two holes each to accept bolts to mount either air cleaners or a CAB. I assume they would provide some insulating value to minimize heat transfer from the carb body to the filter or CAB but I really cannot see that this would have any effect on the temperature of inlet air. Best--Michael Oritt On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell wrote: > Michael, > > The the phenolic spacers are insulators. On other cars they would be > installed between the manifold and the heat shield and/or the heat shield > and the carbs. > > But these match the CAB side of the carb body, not the manifold side? > Interesting. > > Not much help, sorry. > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > >> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >> up everything tomorrow. The Moss kit came with two phenolic spacers >> about 3/8" thick that mount to the outer face of the carburetor bodies, >> assumedly between the face and the air cleaners. >> >> My car is a Le Mans and cold air box was mounted directly to the carbs >> without any blocks. Using them would make it just that much more >> difficult to get the cold air box and the hose and hose adaptor in >> place. It would also result in the fuel bowl overflow tubes not reaching >> the grommeted holes in the box. >> >> What function do the blocks serve, are they normally found when CAB's >> are mounted (as opposed to air cleaners) and if so what harm might be >> caused by not using them? >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/rchaskell at earthlink.net >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 09:59:06 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 08:59:06 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> Absent a specific sequence, I always torque from the middle out, alternating sides. Bob ps. They're studs--unless someone has changed yours--so you're torquing nuts. On 3/25/2017 12:08 AM, John Spaur wrote: > > Shouldn?t be. It?s not like you are torqueing the head. > > John Spaur > > ?62 BT7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *gturl gturl > *Sent:* Friday, March 24, 2017 8:55 PM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Rocker Shaft Installation, 6 cyl engine > > Is there a preferred sequence for tightening the bolts holding the > rocker shaft pedestals to the head? > > Thanks in advance.. > > Geoff Turl > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 10:03:10 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 09:03:10 -0700 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> And, the CABs are a PITA to remove and attach WITHOUT any more spacers (probably why so many original ones are missing). We got a repop for our M, but I'm considering installing some other type of filter for normal, 'daily' use. Bob On 3/25/2017 7:00 AM, Michael Oritt wrote: > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between > the carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to > mount either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat > transfer from the carb body to the filter or CAB but I really cannot > see that this would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > Michael, > > The the phenolic spacers are insulators. On other cars they would > be installed between the manifold and the heat shield and/or the > heat shield and the carbs. > > But these match the CAB side of the carb body, not the manifold > side? Interesting. > > Not much help, sorry. > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > I am reinstalling the H6 carbs after rebuilding them and I > hope to wrap > up everything tomorrow. The Moss kit came with two phenolic > spacers > about 3/8" thick that mount to the outer face of the > carburetor bodies, > assumedly between the face and the air cleaners. > > My car is a Le Mans and cold air box was mounted directly to > the carbs > without any blocks. Using them would make it just that much more > difficult to get the cold air box and the hose and hose adaptor in > place. It would also result in the fuel bowl overflow tubes > not reaching > the grommeted holes in the box. > > What function do the blocks serve, are they normally found > when CAB's > are mounted (as opposed to air cleaners) and if so what harm > might be > caused by not using them? > > > _______________________________________________ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Sat Mar 25 10:56:49 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 12:56:49 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> Bob-- After further consideration--as well as impatience and laziness--I decided to skip the spacers. As you say, fitting the CAB is difficult enough without pushing everything further out under the shroud. Just took car for a shakedown and all seems good. In the process of removing, rebuilding and refitting the carbs I also managed to lose an annoying rattle that would only appear under acceleration between 3000 and 3500 rpms. It has been there for about five years and no matter what I did I could not find its source. Good riddance! Best--Michael Oritt On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell wrote: > And, the CABs are a PITA to remove and attach WITHOUT any more spacers > (probably why so many original ones are missing). We got a repop for our > M, but I'm considering installing some other type of filter for normal, > 'daily' use. > > Bob > > On 3/25/2017 7:00 AM, Michael Oritt wrote: > > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between the > carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to mount > either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat > transfer from the carb body to the filter or CAB but I really cannot see > that this would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > wrote: > >> Michael, >> >> The the phenolic spacers are insulators. On other cars they would be >> installed between the manifold and the heat shield and/or the heat shield >> and the carbs. >> >> But these match the CAB side of the carb body, not the manifold side? >> Interesting. >> >> Not much help, sorry. >> >> Cheers, >> >> Bob Haskell >> AHCA 3000 MkI registrar >> http://www.ciahc.org/registry_3000mk1.php >> >> >> On 03/24/2017 10:40 PM, Michael Oritt wrote: >> >>> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >>> up everything tomorrow. The Moss kit came with two phenolic spacers >>> about 3/8" thick that mount to the outer face of the carburetor bodies, >>> assumedly between the face and the air cleaners. >>> >>> My car is a Le Mans and cold air box was mounted directly to the carbs >>> without any blocks. Using them would make it just that much more >>> difficult to get the cold air box and the hose and hose adaptor in >>> place. It would also result in the fuel bowl overflow tubes not reaching >>> the grommeted holes in the box. >>> >>> What function do the blocks serve, are they normally found when CAB's >>> are mounted (as opposed to air cleaners) and if so what harm might be >>> caused by not using them? >>> >>> >>> _______________________________________________ >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/michael.oritt at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Sat Mar 25 11:08:09 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sat, 25 Mar 2017 13:08:09 -0400 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> <54697258-54e4-cc3c-f194-dcfe07aedaba@comcast.net> The workshop manual does not specify a torquing sequence, but I do it like Bob does. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Saturday, March 25, 2017 11:59 AM To: healeys at autox.team.net Subject: Re: [Healeys] Rocker Shaft Installation, 6 cyl engine Absent a specific sequence, I always torque from the middle out, alternating sides. Bob ps. They're studs--unless someone has changed yours--so you're torquing nuts. On 3/25/2017 12:08 AM, John Spaur wrote: Shouldn't be. It's not like you are torqueing the head. John Spaur '62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of gturl gturl Sent: Friday, March 24, 2017 8:55 PM To: healeys at autox.team.net Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine Is there a preferred sequence for tightening the bolts holding the rocker shaft pedestals to the head? Thanks in advance.. Geoff Turl Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From jmsdarch at sbcglobal.net Sat Mar 25 11:46:02 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 10:46:02 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> <54697258-54e4-cc3c-f194-dcfe07aedaba@comcast.net> Per the shop manual: When reassembling the rocker gear, commence with the No. 4 bracket and secure the oil feed pipe with the washers in position, ensuring that the dowel on the banjo bolt locates in the rocker shaft. I should have checked the manual first. John Spaur -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Sat Mar 25 14:32:00 2017 From: phoenix722 at comcast.net (Mike S) Date: Sat, 25 Mar 2017 13:32:00 -0700 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> Seems obvious that the phenolic spacers were rattling.... On 3/25/2017 9:56 AM, Michael Oritt wrote: > Bob-- > > After further consideration--as well as impatience and laziness--I > decided to skip the spacers. As you say, fitting the CAB is difficult > enough without pushing everything further out under the shroud. > > Just took car for a shakedown and all seems good. In the process of > removing, rebuilding and refitting the carbs I also managed to lose an > annoying rattle that would only appear under acceleration between 3000 > and 3500 rpms. It has been there for about five years and no matter > what I did I could not find its source. Good riddance! > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell > And, the CABs are a PITA to remove and attach WITHOUT any more > spacers (probably why so many original ones are missing). We got > a repop for our M, but I'm considering installing some other type > of filter for normal, 'daily' use. > > Bob > > > On 3/25/2017 7:00 AM, Michael Oritt wrote: >> Bob-- >> >> To clarify, the kit came with four phenolic blocks or spacers. >> >> Two are square with scalloped sides and four holes and mount >> between the carbs and the intake manifold face. >> >> Two more are diamond shaped with two holes each to accept bolts >> to mount either air cleaners or a CAB. >> >> I assume they would provide some insulating value to minimize >> heat transfer from the carb body to the filter or CAB but I >> really cannot see that this would have any effect on the >> temperature of inlet air. >> >> Best--Michael Oritt >> >> On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell >> >> Michael, >> >> The the phenolic spacers are insulators. On other cars they >> would be installed between the manifold and the heat shield >> and/or the heat shield and the carbs. >> >> But these match the CAB side of the carb body, not the >> manifold side? Interesting. >> >> Not much help, sorry. >> >> Cheers, >> >> Bob Haskell >> AHCA 3000 MkI registrar >> http://www.ciahc.org/registry_3000mk1.php >> >> >> >> On 03/24/2017 10:40 PM, Michael Oritt wrote: >> >> I am reinstalling the H6 carbs after rebuilding them and >> I hope to wrap >> up everything tomorrow. The Moss kit came with two >> phenolic spacers >> about 3/8" thick that mount to the outer face of the >> carburetor bodies, >> assumedly between the face and the air cleaners. >> >> My car is a Le Mans and cold air box was mounted directly >> to the carbs >> without any blocks. Using them would make it just that >> much more >> difficult to get the cold air box and the hose and hose >> adaptor in >> place. It would also result in the fuel bowl overflow >> tubes not reaching >> the grommeted holes in the box. >> >> What function do the blocks serve, are they normally >> found when CAB's >> are mounted (as opposed to air cleaners) and if so what >> harm might be >> caused by not using them? >> >> >> _______________________________________________ >> > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/michael.oritt at gmail.com > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Sat Mar 25 14:53:21 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Sat, 25 Mar 2017 20:53:21 +0000 Subject: [Healeys] Phenolic spacers Don't know about your particular kits, but I do know many of the carb kits they sell these days are packaged so they fit a wide variety of cars with the same or similar carbs. The last kit I got for some Zenith Stromberg 175CDs had enough "extra" parts, including diaphragms for 150CDs, to rebuild another set of carbs. Point being just because it is in the kit doesn't mean it is meant for your car. I would use the gasket to make a good seal between carb and air cleaner and not worry about the insulating block. Greg Lemon ---- Michael Oritt wrote: > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between the > carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to mount > either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat transfer > from the carb body to the filter or CAB but I really cannot see that this > would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > wrote: > > > Michael, > > > > The the phenolic spacers are insulators. On other cars they would be > > installed between the manifold and the heat shield and/or the heat shield > > and the carbs. > > > > But these match the CAB side of the carb body, not the manifold side? > > Interesting. > > > > Not much help, sorry. > > > > Cheers, > > > > Bob Haskell > > AHCA 3000 MkI registrar > > http://www.ciahc.org/registry_3000mk1.php > > > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > > >> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap > >> up everything tomorrow. The Moss kit came with two phenolic spacers > >> about 3/8" thick that mount to the outer face of the carburetor bodies, > >> assumedly between the face and the air cleaners. > >> > >> My car is a Le Mans and cold air box was mounted directly to the carbs > >> without any blocks. Using them would make it just that much more > >> difficult to get the cold air box and the hose and hose adaptor in > >> place. It would also result in the fuel bowl overflow tubes not reaching > >> the grommeted holes in the box. > >> > >> What function do the blocks serve, are they normally found when CAB's > >> are mounted (as opposed to air cleaners) and if so what harm might be > >> caused by not using them? > >> > >> > >> _______________________________________________ > >> Support Team.Net http://www.team.net/donate.html > >> Suggested annual donation $12.75 > >> Archive: http://www.team.net/archive > >> Forums: http://www.team.net/forums > >> > >> Healeys at autox.team.net > >> http://autox.team.net/mailman/listinfo/healeys > >> > >> Unsubscribe/Manage: http://autox.team.net/mailman/ > >> options/healeys/rchaskell at earthlink.net > >> > >> From michael.oritt at gmail.com Sat Mar 25 14:59:46 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 16:59:46 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> <0f140b06-ddaa-c981-feef-a24b3829529e@comcast.net> Mike-- Nope--In my first post I wrote "My car is a Le Mans and the cold air box was mounted directly to the carbs without any blocks." However it might very well have been the CAB itself--in any caae all seems good now. Best--Michael Oritt On Sat, Mar 25, 2017 at 4:32 PM, Mike S wrote: > Seems obvious that the phenolic spacers were rattling.... > > On 3/25/2017 9:56 AM, Michael Oritt wrote: > > Bob-- > > After further consideration--as well as impatience and laziness--I decided > to skip the spacers. As you say, fitting the CAB is difficult enough > without pushing everything further out under the shroud. > > Just took car for a shakedown and all seems good. In the process of > removing, rebuilding and refitting the carbs I also managed to lose an > annoying rattle that would only appear under acceleration between 3000 and > 3500 rpms. It has been there for about five years and no matter what I did > I could not find its source. Good riddance! > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell > wrote: > >> And, the CABs are a PITA to remove and attach WITHOUT any more spacers >> (probably why so many original ones are missing). We got a repop for our >> M, but I'm considering installing some other type of filter for normal, >> 'daily' use. >> >> Bob >> >> On 3/25/2017 7:00 AM, Michael Oritt wrote: >> >> Bob-- >> >> To clarify, the kit came with four phenolic blocks or spacers. >> >> Two are square with scalloped sides and four holes and mount between the >> carbs and the intake manifold face. >> >> Two more are diamond shaped with two holes each to accept bolts to mount >> either air cleaners or a CAB. >> >> I assume they would provide some insulating value to minimize heat >> transfer from the carb body to the filter or CAB but I really cannot see >> that this would have any effect on the temperature of inlet air. >> >> Best--Michael Oritt >> >> On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell >> wrote: >> >>> Michael, >>> >>> The the phenolic spacers are insulators. On other cars they would be >>> installed between the manifold and the heat shield and/or the heat shield >>> and the carbs. >>> >>> But these match the CAB side of the carb body, not the manifold side? >>> Interesting. >>> >>> Not much help, sorry. >>> >>> Cheers, >>> >>> Bob Haskell >>> AHCA 3000 MkI registrar >>> http://www.ciahc.org/registry_3000mk1.php >>> >>> >>> On 03/24/2017 10:40 PM, Michael Oritt wrote: >>> >>>> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >>>> up everything tomorrow. The Moss kit came with two phenolic spacers >>>> about 3/8" thick that mount to the outer face of the carburetor bodies, >>>> assumedly between the face and the air cleaners. >>>> >>>> My car is a Le Mans and cold air box was mounted directly to the carbs >>>> without any blocks. Using them would make it just that much more >>>> difficult to get the cold air box and the hose and hose adaptor in >>>> place. It would also result in the fuel bowl overflow tubes not reaching >>>> the grommeted holes in the box. >>>> >>>> What function do the blocks serve, are they normally found when CAB's >>>> are mounted (as opposed to air cleaners) and if so what harm might be >>>> caused by not using them? >>>> >>>> >>>> _______________________________________________ >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/michael.oritt at gmail.com >> >> >> > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > > > -- > Mike > > MGTD (long gone) > BN1 (long gone) > BN2-100M (gone but in good hands) > BJ8 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/michael.oritt at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Sat Mar 25 15:01:17 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 17:01:17 -0400 Subject: [Healeys] Phenolic spacers References: <20170325205321.K62EW.294844.root@cdptpa-web06> Greg-- You're probably correct and the suggestion you made in your last paragraph is in fact the procedure I followed. Best--Michael Oritt On Sat, Mar 25, 2017 at 4:53 PM, wrote: > Don't know about your particular kits, but I do know many of the carb kits > they sell these days are packaged so they fit a wide variety of cars with > the same or similar carbs. The last kit I got for some Zenith Stromberg > 175CDs had enough "extra" parts, including diaphragms for 150CDs, to > rebuild another set of carbs. Point being just because it is in the kit > doesn't mean it is meant for your car. > > I would use the gasket to make a good seal between carb and air cleaner > and not worry about the insulating block. > > Greg Lemon > > ---- Michael Oritt wrote: > > Bob-- > > > > To clarify, the kit came with four phenolic blocks or spacers. > > > > Two are square with scalloped sides and four holes and mount between the > > carbs and the intake manifold face. > > > > Two more are diamond shaped with two holes each to accept bolts to mount > > either air cleaners or a CAB. > > > > I assume they would provide some insulating value to minimize heat > transfer > > from the carb body to the filter or CAB but I really cannot see that this > > would have any effect on the temperature of inlet air. > > > > Best--Michael Oritt > > > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > > wrote: > > > > > Michael, > > > > > > The the phenolic spacers are insulators. On other cars they would be > > > installed between the manifold and the heat shield and/or the heat > shield > > > and the carbs. > > > > > > But these match the CAB side of the carb body, not the manifold side? > > > Interesting. > > > > > > Not much help, sorry. > > > > > > Cheers, > > > > > > Bob Haskell > > > AHCA 3000 MkI registrar > > > http://www.ciahc.org/registry_3000mk1.php > > > > > > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > > > > >> I am reinstalling the H6 carbs after rebuilding them and I hope to > wrap > > >> up everything tomorrow. The Moss kit came with two phenolic spacers > > >> about 3/8" thick that mount to the outer face of the carburetor > bodies, > > >> assumedly between the face and the air cleaners. > > >> > > >> My car is a Le Mans and cold air box was mounted directly to the carbs > > >> without any blocks. Using them would make it just that much more > > >> difficult to get the cold air box and the hose and hose adaptor in > > >> place. It would also result in the fuel bowl overflow tubes not > reaching > > >> the grommeted holes in the box. > > >> > > >> What function do the blocks serve, are they normally found when CAB's > > >> are mounted (as opposed to air cleaners) and if so what harm might be > > >> caused by not using them? > > >> > > >> > > >> _______________________________________________ > > >> Support Team.Net http://www.team.net/donate.html > > >> Suggested annual donation $12.75 > > >> Archive: http://www.team.net/archive > > >> Forums: http://www.team.net/forums > > >> > > >> Healeys at autox.team.net > > >> http://autox.team.net/mailman/listinfo/healeys > > >> > > >> Unsubscribe/Manage: http://autox.team.net/mailman/ > > >> options/healeys/rchaskell at earthlink.net > > >> > > >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 15:42:31 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 14:42:31 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide *http://tinyurl.com/mkht72e* -------------- next part -------------- An HTML attachment was scrubbed... URL: From fsufan1952 at yahoo.com Sat Mar 25 18:33:05 2017 From: fsufan1952 at yahoo.com (fsufan1952 at yahoo.com) Date: Sat, 25 Mar 2017 20:33:05 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: $473 ? , I wonder if it's signed by the author? Sent from my iPhone > On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: > > http://tinyurl.com/mkht72e > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From m.fawcett at cox.net Sat Mar 25 21:28:41 2017 From: m.fawcett at cox.net (Mark Fawcett) Date: Sat, 25 Mar 2017 20:28:41 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <-7983912800445063073@unknownmsgid> i have signed copy and would sell it for that price. Mark Fawcett On Sat, Mar 25, 2017 at 5:33 PM, wrote: > $473 ? , I wonder if it's signed by the author? > > Sent from my iPhone > > On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: > > *http://tinyurl.com/mkht72e * > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/fsufan1952 at yahoo.com > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/m.fawcett at cox.net > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From p_cquinn at tpg.com.au Sat Mar 25 22:16:08 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Sun, 26 Mar 2017 15:16:08 +1100 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> My Anderson/Moment book is signed by both. Hoo Roo Patrick Quinn Blue Mountains Australia From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of fsufan1952 at yahoo.com Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide $473 ? , I wonder if it's signed by the author? Sent from my iPhone On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healey.nut at gmail.com Sat Mar 25 23:11:03 2017 From: healey.nut at gmail.com (Alan Seigrist) Date: Sun, 26 Mar 2017 13:11:03 +0800 Subject: [Healeys] Phenolic spacers References: <20170325205321.K62EW.294844.root@cdptpa-web06> The phenolic spacers are usually used to get the proper mounting distance from the exhaust manifolds for various applications - they come in many different sizes. If your car didn't have them, there's no need for them. Interestingly, on later smog equipped cars, they put a air heater in that spot to better vaporize the mixture. On Sun, Mar 26, 2017 at 4:53 AM, wrote: > Don't know about your particular kits, but I do know many of the carb kits > they sell these days are packaged so they fit a wide variety of cars with > the same or similar carbs. The last kit I got for some Zenith Stromberg > 175CDs had enough "extra" parts, including diaphragms for 150CDs, to > rebuild another set of carbs. Point being just because it is in the kit > doesn't mean it is meant for your car. > > I would use the gasket to make a good seal between carb and air cleaner > and not worry about the insulating block. > > Greg Lemon > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From edriver at sasktel.net Sun Mar 26 10:01:06 2017 From: edriver at sasktel.net (E.A. Driver) Date: Sun, 26 Mar 2017 10:01:06 -0600 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: > > My Anderson/Moment book is signed by both. > > Hoo Roo > > Patrick Quinn > > Blue Mountains Australia > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *fsufan1952 at yahoo.com > *Sent:* Sunday, 26 March 2017 11:33 AM > *To:* Bob Spidell > *Cc:* Healeys > *Subject:* Re: [Healeys] Something to go in your bookcase alongside > your Anderson/Moment Restoration Guide > > $473 ? , I wonder if it's signed by the author? > > Sent from my iPhone > > > On Mar 25, 2017, at 5:42 PM, Bob Spidell > *http://tinyurl.com/mkht72e* > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Sun Mar 26 10:53:17 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Sun, 26 Mar 2017 16:53:17 +0000 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean ________________________________ From: Healeys on behalf of E.A. Driver Sent: March 26, 2017 4:01 PM To: healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: My Anderson/Moment book is signed by both. Hoo Roo Patrick Quinn Blue Mountains Australia Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide $473 ? , I wonder if it's signed by the author? Sent from my iPhone http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Sun Mar 26 11:40:36 2017 From: goldengt at cal.net (goldengt) Date: Sun, 26 Mar 2017 10:40:36 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide Mine got loaned and I'll probably never see it again.?Ken Freese? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Jean Caron Date: 3/26/17 9:53 AM (GMT-08:00) To: "E.A. Driver" , healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean From: Healeys on behalf of E.A. Driver Sent: March 26, 2017 4:01 PM To: healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide ? So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: My Anderson/Moment book is signed by both. ? Hoo Roo ? Patrick Quinn Blue Mountains Australia ? ? ? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of fsufan1952 at yahoo.com Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide ? $473 ? , I wonder if it's signed by the author? Sent from my iPhone On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From leavcast at gmail.com Sun Mar 26 12:48:46 2017 From: leavcast at gmail.com (George Castleberry) Date: Sun, 26 Mar 2017 11:48:46 -0700 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> $420?.what are they smoking? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael MacLean Sent: Friday, March 24, 2017 2:19 PM To: i erbs; Ahealey help Subject: Re: [Healeys] Moment Anderson book on ebay Never mind that. Look at the other one at the middle of the page for a buy it now of $420.00! Mike MacLean On Friday, March 24, 2017 1:22 PM, i erbs wrote: currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg &vxp=mtr Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Sun Mar 26 13:48:51 2017 From: eyera3000 at gmail.com (i erbs) Date: Sun, 26 Mar 2017 12:48:51 -0700 Subject: [Healeys] Moment Anderson book on ebay References: It sold for $202.50 Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 24, 2017 11:48 AM, "i erbs" wrote: > currently at $195.00 > > http://www.ebay.com/itm/Austin-Healey-RESTORATION- > GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g: > DyAAAOSwtfhYn5Fg&vxp=mtr > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Sun Mar 26 14:17:12 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sun, 26 Mar 2017 16:17:12 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, Mine is pristine with no signatures to deface it and I would probably let it go for around $500 or more, heh, heh, heh..... I have found several errors in that book related to BJ8s (what book doesn't have errors?) and discussed them with Gary Anderson. Unfortunately, there are no plans by the publisher to issue an update or errata sheet. I guess that makes the original edition more valuable. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Jean Caron Sent: Sunday, March 26, 2017 12:53 PM To: E.A. Driver; healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean -------------- next part -------------- An HTML attachment was scrubbed... URL: From m.brouillette at comcast.net Sun Mar 26 15:33:00 2017 From: m.brouillette at comcast.net (mike brouillette) Date: Sun, 26 Mar 2017 17:33:00 -0400 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> <013201d2a661$9a2c03a0$ce840ae0$@gmail.com> Another one just got listed for $195. http://www.ebay.com/itm/-/152486878522? -------------- next part -------------- An HTML attachment was scrubbed... URL: From sentenac.rw at gmail.com Sun Mar 26 16:36:03 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sun, 26 Mar 2017 15:36:03 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, Sounds like mine. I wonder how many later purchasers of the now out of print Guide also have the four pages of single spaced Corrections and Additions from 2001. Doesn't matter if you're not going to use the book ;-) -Roland BN1 #724 On Sun, 26 Mar 2017 16:53:17 +0000, you wrote: >No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. > > >Jean > > >________________________________ >From: Healeys on behalf of E.A. Driver >Sent: March 26, 2017 4:01 PM >To: healeys at autox.team.net >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >So is mine! > >EAD >Canadian Prairies >Saskatoon, Saskatchewan > >On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: >My Anderson/Moment book is signed by both. > >Hoo Roo > >Patrick Quinn >Blue Mountains Australia > > > >Sent: Sunday, 26 March 2017 11:33 AM >To: Bob Spidell >Cc: Healeys >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >$473 ? , I wonder if it's signed by the author? > >Sent from my iPhone > > >http://tinyurl.com/mkht72e >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > > From ahbt71 at gmail.com Sun Mar 26 17:33:41 2017 From: ahbt71 at gmail.com (Mike Tobin) Date: Sun, 26 Mar 2017 17:33:41 -0600 Subject: [Healeys] Caliper Piston Dustcover Hi, If anyone is still out there. I got the caliper apart and cleaned (thanks all) and now I'm having trouble getting the pistons in with the dust covers. I can get the piston in or I can get the dust cover seated in its slot in the cylender. I can't get both. If I put the piston in first I can't get the cover into its slot. If I put the cover in first I can't keep it in position and while installing the piston. I know I've done this back in the day and I don't remember having any problem (or maybe I just said "Screw It!" and only fit the cover to the piston). Cheers, Mike Tobin, Townsend, Montana -------------- next part -------------- An HTML attachment was scrubbed... URL: From rchaskell at earthlink.net Sun Mar 26 18:17:14 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Sun, 26 Mar 2017 20:17:14 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> <057c01d2a66d$f64ec850$e2ec58f0$@rr.com> Steve, Here's the errata sheet that Gary sent me back in 2002. If Gary and/or Roger can provide an new version, I'd be glad to update it. http://liblbc.info/images/Healey/Books/errata_rg.pdf Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/26/2017 04:17 PM, BJ8Healeys wrote: > Mine is pristine with no signatures to deface it and I would probably > let it go for around $500 or more, heh, heh, heh..... > > I have found several errors in that book related to BJ8s (what book > doesn't have errors?) and discussed them with Gary Anderson. > Unfortunately, there are no plans by the publisher to issue an update or > errata sheet. I guess that makes the original edition more valuable. > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *Jean Caron > *Sent:* Sunday, March 26, 2017 12:53 PM > *To:* E.A. Driver; healeys at autox.team.net > *Subject:* Re: [Healeys] Something to go in your bookcase alongside your > Anderson/Moment Restoration Guide > > No signatures in mine, but I have greasy pages, the cover is taped at > the corners so it does not tear apart, several notes in many pages and I > use it almost every week, great reference. > > Jean > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From rrengineer.mike at att.net Sun Mar 26 19:29:31 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Mon, 27 Mar 2017 01:29:31 +0000 (UTC) Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> I remember someone asking me if I waned it autographed for something like 5 or 10 bucks more when I was ordering my copy by phone.? Would that have added another $100 to the value?Mike MacLean On Sunday, March 26, 2017 5:33 PM, "sentenac.rw at gmail.com" wrote: Sounds like mine.? I wonder how many later purchasers of the now out of print Guide also have the four pages of single spaced Corrections and Additions from 2001.? Doesn't matter if you're not going to use the book ;-) -Roland BN1 #724 On Sun, 26 Mar 2017 16:53:17 +0000, you wrote: >No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. > > >Jean > > >________________________________ >From: Healeys on behalf of E.A. Driver >Sent: March 26, 2017 4:01 PM >To: healeys at autox.team.net >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >So is mine! > >EAD >Canadian Prairies >Saskatoon, Saskatchewan > >On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: >My Anderson/Moment book is signed by both. > >Hoo Roo > >Patrick Quinn >Blue Mountains Australia > > > >Sent: Sunday, 26 March 2017 11:33 AM >To: Bob Spidell >Cc: Healeys >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >$473 ? , I wonder if it's signed by the author? > >Sent from my iPhone > > >http://tinyurl.com/mkht72e >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation? $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation? $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Sun Mar 26 22:15:50 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Mon, 27 Mar 2017 4:15:50 +0000 Subject: [Healeys] Caliper Piston Dustcover Mike, I had the same issue on my TR250 (same brakes as a BJ8). Spent the better part of a Saturday trying to get them on, got a couple on, tore a couple, ordered another kit. The new kit was much easier, though still a bit finicky, the rubber was slightly thinner and it made everything fit much better. I don't remember where I sourced either, but the first set was obviously not that well made. Also if you are working with used parts make sure the grooves and everything are cleaned out very thoroughly. Greg Lemon 68 TR250 ---- Mike Tobin wrote: > Hi, If anyone is still out there. > I got the caliper apart and cleaned (thanks all) and now I'm having trouble > getting the pistons in with the dust covers. > I can get the piston in or I can get the dust cover seated in its slot in > the cylender. I can't get both. > If I put the piston in first I can't get the cover into its slot. If I put > the cover in first I can't keep it in position and while installing the > piston. > I know I've done this back in the day and I don't remember having any > problem (or maybe I just said "Screw It!" and only fit the cover to the > piston). > Cheers, > Mike Tobin, > Townsend, Montana From rrengineer.mike at att.net Mon Mar 27 01:16:47 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Mon, 27 Mar 2017 07:16:47 +0000 (UTC) Subject: [Healeys] Brake Cleaner References: <2119238946.3496448.1490599007901.ref@mail.yahoo.com> I was looking for something to clean off some oil spreading around the fill and drain plugs of the differential so I could paint it. ?Here in California any chemical that works is banned. ?It's impossible to find a degreaser that works. ?Looking around the Internet I found a brake and parts cleaner in a spray can made by Wurth. ?It says on the can, "Not for retail sale", but you can buy it at Pegasus Racing for less than 6 bucks. ?I sprayed the oil on the diff with this stuff and waited for it to dry. ?There was no runoff on the ground below where I sprayed, but when it was dry the oil was gone and it was bone dry. ?What makes this so good in this case is the diff had been sand blasted to a rough surface. ?I did not think it would be easy to get out. ?Heck I got to buy more of this stuff. ?No financial interest, just a very satisfied customer. (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies | | | | | | | | | | | (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies Wurth makes the best non-chlorinated brake cleaner available. Removes grease, oil, and brake dust and dries quickly without residue. Harmless to most plastics. | | | | Mike MacLean Sent from Yahoo Mail on Android -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Mon Mar 27 06:16:53 2017 From: michael.salter at gmail.com (michael.salter at gmail.com) Date: Mon, 27 Mar 2017 12:16:53 +0000 (UTC) Subject: [Healeys] Caliper Piston Dustcover References: <20170327041550.Q9GEP.11688.root@cdptpa-web12> Hi Mike, Installing those dust covers can be very difficult however with patience and liberal application of brake grease it can be achieved. First, as Greg mentioned it it imperative that both the grooves in the body are scrupulously clean. Scrape around with a dental pick to ensure that any rust is removed. Now insert the piston seal fully into the lower groove being sure to press it fully home with your thumbs. Apply a little brake grease to it. Next insert the lower lip of the dust seal into the upper groove again being sure to press it fully home with your thumbs. Now lightly? press the closed end of the greased piston against the dust seal and use a small wire hook to lift the outer lip of the dust seal onto the outside of the piston. Now it will be possible to wiggle the piston? into the bore through both seals. DO NOT FORCE IT IN. LIGHT THUMB PRESSURE SHOULD BE ALL THAT IS REQUIRED. Finally use a dental pic to guide the outer lip of the dust seal into its groove in the piston. Only 3 to go... Michael S BN1 #174 With 4 wheel drum brakes. ? From: glemon at neb.rr.com Sent: Monday, March 27, 12:23 AM Subject: Re: [Healeys] Caliper Piston Dustcover To: healeys at autox.team.net, Mike Tobin Mike, I had the same issue on my TR250 (same brakes as a BJ8). Spent the better part of a Saturday trying to get them on, got a couple on, tore a couple, ordered another kit. The new kit was much easier, though still a bit finicky, the rubber was slightly thinner and it made everything fit much better. I don't remember where I sourced either, but the first set was obviously not that well made. Also if you are working with used parts make sure the grooves and everything are cleaned out very thoroughly. Greg Lemon 68 TR250 ---- Mike Tobin wrote: > Hi, If anyone is still out there. > I got the caliper apart and cleaned (thanks all) and now I'm having trouble > getting the pistons in with the dust covers. > I can get the piston in or I can get the dust cover seated in its slot in > the cylender. I can't get both. > If I put the piston in first I can't get the cover into its slot. If I put > the cover in first I can't keep it in position and while installing the > piston. > I know I've done this back in the day and I don't remember having any > problem (or maybe I just said "Screw It!" and only fit the cover to the > piston). > Cheers, > Mike Tobin, > Townsend, Montana _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 27 09:25:19 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 27 Mar 2017 16:25:19 +0100 Subject: [Healeys] FW: Caliper Piston Dustcover References: <20170327041550.Q9GEP.11688.root@cdptpa-web12> <3E17D0DD06EE3063.83ced4e6-546f-4184-93e9-558992bd613c@mail.outlook.com> Is my memory playing me up or, having stripped and split the caliper, doesn?t one fit pistons while it?s still split? (Just the once, as one splits the calipers, say, every 50 years.) Simon Sent: 27 March 2017 13:17 Subject: Re: [Healeys] Caliper Piston Dustcover Hi Mike, Installing those dust covers can be very difficult however with patience and liberal application of brake grease it can be achieved. First, as Greg mentioned it it imperative that both the grooves in the body are scrupulously clean. Scrape around with a dental pick to ensure that any rust is removed. Now insert the piston seal fully into the lower groove being sure to press it fully home with your thumbs. Apply a little brake grease to it. Next insert the lower lip of the dust seal into the upper groove again being sure to press it fully home with your thumbs. Now lightly press the closed end of the greased piston against the dust seal and use a small wire hook to lift the outer lip of the dust seal onto the outside of the piston. Now it will be possible to wiggle the piston into the bore through both seals. DO NOT FORCE IT IN. LIGHT THUMB PRESSURE SHOULD BE ALL THAT IS REQUIRED. Finally use a dental pic to guide the outer lip of the dust seal into its groove in the piston. Only 3 to go... Michael S BN1 #174 With 4 wheel drum brakes. ? Sent: Monday, March 27, 12:23 AM Subject: Re: [Healeys] Caliper Piston Dustcover -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 27 10:06:20 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 27 Mar 2017 09:06:20 -0700 Subject: [Healeys] Brake Cleaner References: <2119238946.3496448.1490599007901.ref@mail.yahoo.com> <2119238946.3496448.1490599007901@mail.yahoo.com> I just hate paying more to ship an item than I paid for it. I'll look to se eif it's available locally or on Amazon. Great product... [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 27, 2017 at 12:16 AM, Michael MacLean wrote: > I was looking for something to clean off some oil spreading around the > fill and drain plugs of the differential so I could paint it. Here in > California any chemical that works is banned. It's impossible to find a > degreaser that works. Looking around the Internet I found a brake and > parts cleaner in a spray can made by Wurth. It says on the can, "Not for > retail sale", but you can buy it at Pegasus Racing for less than 6 bucks. > I sprayed the oil on the diff with this stuff and waited for it to dry. > There was no runoff on the ground below where I sprayed, but when it was > dry the oil was gone and it was bone dry. What makes this so good in this > case is the diff had been sand blasted to a rough surface. I did not think > it would be easy to get out. Heck I got to buy more of this stuff. No > financial interest, just a very satisfied customer. > > (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies > > (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies > > Wurth makes the best non-chlorinated brake cleaner available. Removes > grease, oil, and brake dust and dries quickly without residue. Harmless to > most plastics. > > > Mike MacLean > > Sent from Yahoo Mail on Android > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 42103 bytes Desc: not available URL: From rd_parker at juno.com Tue Mar 28 07:48:51 2017 From: rd_parker at juno.com (rd_parker at juno.com) Date: Tue, 28 Mar 2017 06:48:51 -0700 Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc From vintage_roadster_restoration at hotmail.com Tue Mar 28 08:27:08 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 28 Mar 2017 14:27:08 +0000 Subject: [Healeys] Rotisseries. References: Bob, Check this site, it will likely be of help for you. www.homemadetools.net/category/rotisseries Homemade Rotisseries - HomemadeTools.net www.homemadetools.net Homemade Rotisseries tools. ... Free 50 Must Read Homemade Tools ebook. Join 20,941 of us on the Homemade Tools forum, and get your free 50 Must Read Homemade Tools ... Jean ________________________________ From: Healeys on behalf of rd_parker at juno.com Sent: March 28, 2017 1:48 PM To: Healeys at autox.team.net Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 28 08:33:54 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 28 Mar 2017 07:33:54 -0700 Subject: [Healeys] Rotisseries. References: This is what my dad built--without telling me--for our 100 resto. Bob On 3/28/2017 6:48 AM, rd_parker at juno.com wrote: > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > > -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0005_IMG.JPG Type: image/jpeg Size: 514055 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0007_IMG.JPG Type: image/jpeg Size: 435885 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0008_IMG.JPG Type: image/jpeg Size: 443004 bytes Desc: not available URL: From ahbn6 at verizon.net Tue Mar 28 08:49:39 2017 From: ahbn6 at verizon.net (John Sims) Date: Tue, 28 Mar 2017 10:49:39 -0400 Subject: [Healeys] Rotisseries. References: Look on this page: http://healey6.com/parts_suppliers.htm Under the Miscellaneous section there are listings for several rotisserie manufacturers. John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of rd_parker at juno.com Sent: Tuesday, March 28, 2017 9:49 AM To: Healeys at autox.team.net Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/ahbn6 at verizon.net From drmasucci at comcast.net Tue Mar 28 09:40:00 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 11:40:00 -0400 Subject: [Healeys] Rotisseries. References: I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 59812 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 84643 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > From drmasucci at comcast.net Tue Mar 28 09:41:11 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 11:41:11 -0400 Subject: [Healeys] Rotisseries. References: A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 71852 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 59812 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > From eschulz at frontiernet.net Tue Mar 28 13:38:49 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Tue, 28 Mar 2017 15:38:49 -0400 Subject: [Healeys] Rotisseries. References: <4ccdd705-5e91-8339-56ae-a9d350bdde8f@comcast.net> I built one using your dad's design. Worked great for me. I disassembled it after using it for my BJ7. Still have all the pieces if someone wants it. I'm located in western New York State. Thanks, Elton On 3/28/2017 10:33 AM, Bob Spidell wrote: > This is what my dad built--without telling me--for our 100 resto. > > Bob > > > On 3/28/2017 6:48 AM, rd_parker at juno.com wrote: >> Gentlemen, >> >> Do any of you have information on vehicle rotisseries? I am considering >> getting one, or building one, that will help me on my restoration of my >> 1961 BT7. >> >> Thanks in advance for any information, >> >> Bob P. >> Bellflower, CA. >> >> ____________________________________________________________ >> >> > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 28 15:04:59 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 28 Mar 2017 14:04:59 -0700 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> This may seem like a silly question... How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. Very clever solution Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: > I used two Harbor Freight engine stands and some home made adapters. > Worked surprisingly well. Now one of those stands is supporting my engine > rebuild. > > > > Sent from my iPhone > > > On Mar 28, 2017, at 9:48 AM, > wrote: > > > > Gentlemen, > > > > Do any of you have information on vehicle rotisseries? I am considering > > getting one, or building one, that will help me on my restoration of my > > 1961 BT7. > > > > Thanks in advance for any information, > > > > Bob P. > > Bellflower, CA. > > > > ____________________________________________________________ > > This Herb Stops Balding Immediately And Restarts Hair Growth > > Regrow Hair Protocol > > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/drmasucci at comcast.net > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From blkbt7 at yahoo.com Tue Mar 28 15:16:45 2017 From: blkbt7 at yahoo.com (ROBERT BROWN) Date: Tue, 28 Mar 2017 16:16:45 -0500 Subject: [Healeys] BJ8 Oil Filter I'm about to change the oil on a BJ8 equipped with a spin-on filter (probably from Moss). I can't read the filter part number while on the engine and would prefer to purchase a new one prior to removing the old. Would some kind BJ8 owner know what filter to use? TIA Bob BT7 owner Sent from my iPhone From drmasucci at comcast.net Tue Mar 28 17:05:12 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 19:05:12 -0400 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> The frame and structure is a two-man lift. My step son rolled it out of my barn up to the ramp truck, we were able to roll it up the ramp with one person on each stand. We then disconnected it from the stands for transport. We got to the shop and carried it off the truck and into the shop. We then inserted the black rotating pieces back into the stands. You can have one guy in the back and one up front. Both lift to proper height, while one gets his into the stand. Then the other. Obviously easier with three people, but we did it without a hitch. It was all much more stable than even I expected. When working on the car, one person can rotate the car without fear of tipping. I would not use these stands with a bigger car, but for the Healey it was great. The two stands cost under $400, plus about another $70 in steel from McMaster-Carr. Plus I can sell one of the stands. It's for sale for say $90. Note that I modified the stands so that the rotating angle would be parallel to the ground. Drilled one additional hole to set the proper angle. It can be switched back and forth in 10 minutes. And yes I installed all brake and fuel lines, all electrics, and other small items while still on the stands. I took the car off the stands before I installed the suspension. Sent from my iPhone > On Mar 28, 2017, at 5:04 PM, i erbs wrote: > > This may seem like a silly question... > How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. > Very clever solution > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > >> On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: >> I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. >> >> >> >> Sent from my iPhone >> >> > On Mar 28, 2017, at 9:48 AM, wrote: >> > >> > Gentlemen, >> > >> > Do any of you have information on vehicle rotisseries? I am considering >> > getting one, or building one, that will help me on my restoration of my >> > 1961 BT7. >> > >> > Thanks in advance for any information, >> > >> > Bob P. >> > Bellflower, CA. >> > >> > ____________________________________________________________ >> > This Herb Stops Balding Immediately And Restarts Hair Growth >> > Regrow Hair Protocol >> > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc >> > _______________________________________________ >> > Support Team.Net http://www.team.net/donate.html >> > Suggested annual donation $12.75 >> > Archive: http://www.team.net/archive >> > Forums: http://www.team.net/forums >> > >> > Healeys at autox.team.net >> > http://autox.team.net/mailman/listinfo/healeys >> > >> > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net >> > >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 116585 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 90331 bytes Desc: not available URL: From drmasucci at comcast.net Tue Mar 28 17:19:59 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 19:19:59 -0400 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> Actually I'm forgetting. I was able to get most of the suspension on also while still on the stands. Then I took it off and sat it on wire spool stands that were being thrown away where I work. Back on wire spool stands. Sent from my iPhone > On Mar 28, 2017, at 5:04 PM, i erbs wrote: > > This may seem like a silly question... > How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. > Very clever solution > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > >> On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: >> I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. >> >> >> >> Sent from my iPhone >> >> > On Mar 28, 2017, at 9:48 AM, wrote: >> > >> > Gentlemen, >> > >> > Do any of you have information on vehicle rotisseries? I am considering >> > getting one, or building one, that will help me on my restoration of my >> > 1961 BT7. >> > >> > Thanks in advance for any information, >> > >> > Bob P. >> > Bellflower, CA. >> > >> > ____________________________________________________________ >> > This Herb Stops Balding Immediately And Restarts Hair Growth >> > Regrow Hair Protocol >> > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc >> > _______________________________________________ >> > Support Team.Net http://www.team.net/donate.html >> > Suggested annual donation $12.75 >> > Archive: http://www.team.net/archive >> > Forums: http://www.team.net/forums >> > >> > Healeys at autox.team.net >> > http://autox.team.net/mailman/listinfo/healeys >> > >> > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net >> > >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 1334944 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 1400047 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image3.JPG Type: image/jpeg Size: 1421634 bytes Desc: not available URL: From ah3000me at gmail.com Tue Mar 28 18:47:52 2017 From: ah3000me at gmail.com (Tom) Date: Tue, 28 Mar 2017 20:47:52 -0400 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> Bob, My spin-on filter adapter is from Moss, and I use a WIX 51516. John Sims's site has additional info: http://healey6.com/replacement_parts.htm - tom On Tue, Mar 28, 2017 at 5:16 PM, ROBERT BROWN wrote: > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/ah3000me at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From thehartnetts at earthlink.net Tue Mar 28 22:54:06 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Tue, 28 Mar 2017 21:54:06 -0700 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > From ahbn6 at verizon.net Wed Mar 29 05:24:51 2017 From: ahbn6 at verizon.net (John Sims) Date: Wed, 29 Mar 2017 07:24:51 -0400 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> <230573B327A34BABA9CADECA3A0D0333@LeonardPCPC> This is rather dated but it is worth a read: http://www.minimopar.net/oilfilters/ John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Wednesday, March 29, 2017 12:54 AM To: AH Mail List Subject: Re: [Healeys] BJ8 Oil Filter Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/ahbn6 at verizon.net From tomfelts at windstream.net Wed Mar 29 06:37:01 2017 From: tomfelts at windstream.net (Tom Felts) Date: Wed, 29 Mar 2017 8:37:01 -0400 Subject: [Healeys] BJ8 Oil Filter I use a NAPA filter. ---- Len and/or Marge Hartnett wrote: ============= Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From tomfelts at windstream.net Wed Mar 29 06:39:00 2017 From: tomfelts at windstream.net (Tom Felts) Date: Wed, 29 Mar 2017 8:39:00 -0400 Subject: [Healeys] BJ8 Oil Filter Disregard---I didn't read the original post. tom ---- Tom Felts wrote: ============= I use a NAPA filter. ---- Len and/or Marge Hartnett wrote: ============= Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From eyera3000 at gmail.com Wed Mar 29 08:24:09 2017 From: eyera3000 at gmail.com (I Erbs) Date: Wed, 29 Mar 2017 07:24:09 -0700 Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> Scam warning Mr. Ira Erbs Portland, OR excuse typos and strange words my phone wants you to see ---------- Forwarded message ---------- From: "Marion S. Brantley, Jr." Date: Mar 29, 2017 6:01 AM Subject: Terrible Misfortune To: Cc: Good Morning, I'm writing this with tears in my eyes, my family and i came down here to Marseille on a short trip.Unfortunately we were mugged at the park of the hotel where we stayed all cash,credit card and mobile phone were stolen off us but luckily we still have our passports with us. I made contact with my bank but it would take me 5 working days to access funds in my account,the bad news is our flight will be leaving in less than 8-hrs from now but we're having problems settling the hotel bills and the hotel manager won't let us leave until we settle the bills. I'll need your help financially and i promise to make the refund once we get back home,Please let me know if i can count on you and i need you to keep checking your email because it's the only way i can reach you. I anticipate your response Marion S. Brantley, Jr. Tampa Bay Austin-Healey Club Membership Chmn. & Delegate -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyron at yahoo.com Wed Mar 29 09:05:51 2017 From: healeyron at yahoo.com (Ron Mitchell) Date: Wed, 29 Mar 2017 15:05:51 +0000 (UTC) Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> I received the same email. ?Be careful out there! Ron MitchellSouth East Michigan Austin Healey Clubwww.semahc.com From: I Erbs To: Ahealey help Sent: Wednesday, March 29, 2017 10:58 AM Subject: [Healeys] Fwd: Terrible Misfortune Scam warning Mr. Ira Erbs Portland, OR excuse typos and strange words my phone wants you to see---------- Forwarded message ---------- From: "Marion S. Brantley, Jr." Date: Mar 29, 2017 6:01 AM Subject: Terrible Misfortune To: Cc: Good Morning, ????? I'm writing this with tears in my eyes, my family and i came down here to Marseille on a short trip.Unfortunately we were mugged at the park of the hotel where we stayed all cash,credit card and mobile phone were stolen off us but luckily we still have our passports with us. ??????? I made contact with my bank but it would take me 5 working days to access funds in my account,the bad news is our flight will be leaving in less than 8-hrs from now but we're having problems settling the hotel bills and the hotel manager won't let us leave until we settle the bills. I'll need your help financially and i promise to make the refund once we get back home,Please let me know if i can count on you and i need you to keep checking your email because it's the only way i can reach you.?I anticipate your response ?? Marion S. Brantley, Jr. Tampa Bay Austin-Healey Club Membership Chmn. & Delegate_______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Wed Mar 29 10:54:42 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 29 Mar 2017 12:54:42 -0400 Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> Dear Marion, I'm a little short of funds right now, but if you look up my friend Alain Charnier in Marseille, he's in a tight spot right now and may be able to help. He needs some welding done on the rocker panels of his Lincoln Continental Mk III for which he'll gladly pay handsomely and a guy with your skills should be able to do the job. Oh, a couple of things. Don't ask any questions and look out for a guy named "Popeye" when you get back. Rick On Wed, Mar 29, 2017 at 10:24 AM, I Erbs wrote: > Scam warning > > Mr. Ira Erbs > Portland, OR > excuse typos and strange words my phone wants you to see > ---------- Forwarded message ---------- > From: "Marion S. Brantley, Jr." > Date: Mar 29, 2017 6:01 AM > Subject: Terrible Misfortune > To: > Cc: > > Good Morning, > I'm writing this with tears in my eyes, my family and i came down > here to Marseille on a short trip.Unfortunately we were mugged at the park > of the hotel where we stayed all cash,credit card and mobile phone were > stolen off us but luckily we still have our passports with us. > I made contact with my bank but it would take me 5 working days to > access funds in my account,the bad news is our flight will be leaving in > less than 8-hrs from now but we're having problems settling the hotel bills > and the hotel manager won't let us leave until we settle the bills. > I'll need your help financially and i promise to make the refund once we > get back home,Please let me know if i can count on you and i need you to > keep checking your email because it's the only way i can reach you. > > I anticipate your response > Marion S. Brantley, Jr. > Tampa Bay Austin-Healey Club > Membership Chmn. & Delegate > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dwflagg at juno.com Wed Mar 29 15:00:33 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Wed, 29 Mar 2017 21:00:33 GMT Subject: [Healeys] Bogus Help Post I received a post, allegedly from Marion Brantley saying he and his family were mugged in France and he needed financial assistance. ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The Observer http://thirdpartyoffers.juno.com/TGL3141/58dc20bfddbed20bf18b6st02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From rick at ewilkins.com Wed Mar 29 16:04:34 2017 From: rick at ewilkins.com (Rick Wilkins) Date: Wed, 29 Mar 2017 15:04:34 -0700 Subject: [Healeys] Time for Wilko to sell... References: <20170329083902.RY9TH.6808.root@pamxwww02-z01> Well guys, It?s been a long time, and now I?ve got to let my Healey hobby go. I?ve been on this list since the 90s and with life getting in the way I just haven?t been able to do my car justice. What I have is a 1958 BN6 and a whole lot of extras. Car was restored the late 70s and some bits done since then. Front was hit and slight damage to headlight assembly (have new bucket and rings) Car and some extras seen here: http://ewilkins .com/wilko/ Currently has stock engine (not running). New Zealand Minilites (bolt on wheels) full set of factory steel wheels and hubcaps bolt on hubs for disk brakes brackets and other bit for disk brake conversion (front) Rear brake conversion brackets for rear. Overdrive transmission (working fine) 3000 engine rebuilt long block .030 over Schneider 2860 cam Bolton lightened flywheel Smitty kit on Toyota transmission w/prop shaft tri carb manifold 1 3/4 Two different triple Weber manifolds three weber DCOE 40 carbs with rebuild kits tri carb exhaust manifold dual carb exhaust manifolds Putzke Bilstein kit New wiring harness in box rally bumperettes 7? Lucas flamethrowers Hardtop w/new perspex and rubber ready to rebuild tons of other extras Not sure how much to ask, but some reasonable offer will work.Thanks for looking, and helping find a good home. Rick Wilkins Wilko -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: frntquarter.jpeg Type: image/jpeg Size: 209055 bytes Desc: not available URL: From jarowe at westnet.com.au Wed Mar 29 17:29:52 2017 From: jarowe at westnet.com.au (John Rowe) Date: Thu, 30 Mar 2017 07:29:52 +0800 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> Hi All Would anyone be able to recognise the car and or the track where this photo was taken. Somewhere in NE USA I think. I need this info to placate FIA re my Lotus 18. Any info or ideas welcome Cheers from West OZ John Rowe -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: in period.jpg Type: image/jpeg Size: 27232 bytes Desc: not available URL: From eyera3000 at gmail.com Wed Mar 29 17:56:57 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 29 Mar 2017 16:56:57 -0700 Subject: [Healeys] Bogus Help Post References: <20170329.170033.1608.0@webmail03.dca.untd.com> Scam Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 29, 2017 2:45 PM, "dwflagg at juno.com" wrote: > I received a post, allegedly from Marion Brantley saying he and his family > were mugged in France and he needed financial assistance. > > > ____________________________________________________________ > *Police Urge Americans to Carry This With Them at All Times* > The Observer > > http://thirdpartyoffers.juno.com/TGL3142/58dc20bfddbed20bf18b6st02duc > [image: SponsoredBy Content.Ad] > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From leavcast at gmail.com Wed Mar 29 18:48:14 2017 From: leavcast at gmail.com (George Castleberry) Date: Wed, 29 Mar 2017 17:48:14 -0700 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> I don?t know how much it weighs but I used my engine hoist to get it on. Maybe someday I can use the hoist to get it off? George From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Tuesday, March 28, 2017 2:05 PM To: David Masucci Cc: Ahealey help Subject: Re: [Healeys] Rotisseries. This may seem like a silly question... How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. Very clever solution Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Wed Mar 29 18:59:05 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 29 Mar 2017 20:59:05 -0400 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, Here's a listing of some of the Lotus18 entries in the US: http://www.racingsportscars.com/type/Lotus/18.html If you go to the section listed "full archives" there is more info. I couldn't find any listing of a car wearing "11" but if you had a driver's name or chassis number, you might get some more info. Best, Rick Neville On Wed, Mar 29, 2017 at 7:29 PM, John Rowe wrote: > > Hi All > > Would anyone be able to recognise the car and or the track where this > photo was taken. Somewhere in NE USA I think. > > I need this info to placate FIA re my Lotus 18. > > Any info or ideas welcome > > Cheers from West OZ > > John Rowe > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Wed Mar 29 19:53:31 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Wed, 29 Mar 2017 18:53:31 -0700 Subject: [Healeys] Bogus Help Post References: <20170329.170033.1608.0@webmail03.dca.untd.com> Hmmm, with what I?m into the engine and transmission with this rebuild, maybe I should start a Go Fund Me campaign. Middle-age guy nearing retirement needs $$$ to for his Healey motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Wednesday, March 29, 2017 4:57 PM To: dwflagg Cc: Ahealey help Subject: Re: [Healeys] Bogus Help Post Scam Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR I received a post, allegedly from Marion Brantley saying he and his family were mugged in France and he needed financial assistance. ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The Observer http://thirdpartyoffers.juno.com/TGL3142/58dc20bfddbed20bf18b6st02duc _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Thu Mar 30 03:15:28 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Thu, 30 Mar 2017 10:15:28 +0100 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, are you sure that that is an FJ car and not F1? If the circuit is in the NE I was wondering whether the circuit was Mosport, the curve looks a bit like Moss. Ok it's not the US but it sort of looks like it. What was the source of the photo? Peter Dzwig On 30/03/2017 00:29, John Rowe wrote: > > Hi All > > Would anyone be able to recognise the car and or the track where this photo was > taken. Somewhere in NE USA I think. > > I need this info to placate FIA re my Lotus 18. > > Any info or ideas welcome > > Cheers from West OZ > > John Rowe > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/pdzwig at summaventures.com > -- =========================================================== Dr Peter Dzwig From linwoodrose at mac.com Thu Mar 30 07:24:18 2017 From: linwoodrose at mac.com (Linwood Rose) Date: Thu, 30 Mar 2017 09:24:18 -0400 Subject: [Healeys] Time for Wilko to sell... References: <20170329083902.RY9TH.6808.root@pamxwww02-z01> <54F4E640-67C3-42E5-BD04-5CA49B1EAD6B@ewilkins.com> Hello Rick, Time does march on. When I began the research in preparation for the restoration of my 1960 BT7 around 1999-2000, the work on your car was one of my resources! Sorry to see you moving on, but best wishes and thanks for the help!! Lin > On Mar 29, 2017, at 6:04 PM, Rick Wilkins wrote: > > Well guys, It?s been a long time, and now I?ve got to let my Healey hobby go. I?ve been on this list since the 90s and with life getting in the way I just haven?t been able to do my car justice. > > What I have is a 1958 BN6 and a whole lot of extras. Car was restored the late 70s and some bits done since then. Front was hit and slight damage to headlight assembly (have new bucket and rings) > > Car and some extras seen here: http://ewilkins.com/wilko/ > > Currently has stock engine (not running). > New Zealand Minilites (bolt on wheels) > full set of factory steel wheels and hubcaps > bolt on hubs for disk brakes > brackets and other bit for disk brake conversion (front) > Rear brake conversion brackets for rear. > Overdrive transmission (working fine) > 3000 engine rebuilt long block .030 over > Schneider 2860 cam > Bolton lightened flywheel > Smitty kit on Toyota transmission w/prop shaft > tri carb manifold 1 3/4 > Two different triple Weber manifolds > three weber DCOE 40 carbs with rebuild kits > tri carb exhaust manifold > dual carb exhaust manifolds > Putzke Bilstein kit > New wiring harness in box > rally bumperettes > 7? Lucas flamethrowers > Hardtop w/new perspex and rubber ready to rebuild > tons of other extras > > Not sure how much to ask, but some reasonable offer will work.Thanks for looking, and helping find a good home. > > Rick Wilkins > Wilko > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/linwoodrose at mac.com > From eyera3000 at gmail.com Thu Mar 30 10:02:10 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 09:02:10 -0700 Subject: [Healeys] cost in today's $ was curious how much healey cost in today's money [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From healeyrik at gmail.com Thu Mar 30 12:07:25 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 30 Mar 2017 14:07:25 -0400 Subject: [Healeys] cost in today's $ References: Interesting, although I'd say a similar car today would actually sell for around $45k. I did the same comparison with the bugeye's price of $1795 and in today's money it would be $15k. I don't know what car you could buy for that today and would guess a modern day bugeye would be around $23k-$25k. This just probably shows that the cost of cars as a percentage of income has increased and we pay more up front for increased safety, mileage, lower emissions and increased longevity. Rick Neville On Thu, Mar 30, 2017 at 12:02 PM, i erbs wrote: > was curious how much healey cost in today's money > [image: Inline image 1] > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From eyera3000 at gmail.com Thu Mar 30 12:36:46 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 11:36:46 -0700 Subject: [Healeys] cost in today's $ References: Seeing as the Healey was about the price of Vette, I guess anew Healey would cost in $80K plus range today. I paid $500.00 in 1975 for my car $2260.00 in today's money. I worked a lot of hours to pay for that car. Of course I have put around $30K into it restoring it over the last 42 years Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 30, 2017 at 11:07 AM, HealeyRick wrote: > Interesting, although I'd say a similar car today would actually sell for > around $45k. I did the same comparison with the bugeye's price of $1795 > and in today's money it would be $15k. I don't know what car you could buy > for that today and would guess a modern day bugeye would be around > $23k-$25k. This just probably shows that the cost of cars as a percentage > of income has increased and we pay more up front for increased safety, > mileage, lower emissions and increased longevity. > > Rick Neville > > On Thu, Mar 30, 2017 at 12:02 PM, i erbs wrote: > >> was curious how much healey cost in today's money >> [image: Inline image 1] >> Ira Erbs >> Portland,OR >> _______ _______ >> (______ \____1959 BN4____/ _______) >> (_________________________) >> BT7 engine and disk brakes >> >> A racing car is an animal with a thousand adjustments. Mario Andretti >> Please excuse random auto corrects and misspelled words >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/healeyrik at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From ardmorebusiness at xtra.co.nz Thu Mar 30 14:55:48 2017 From: ardmorebusiness at xtra.co.nz (Mark Donaldson) Date: Fri, 31 Mar 2017 09:55:48 +1300 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, What is your car serial number? Mark Ardmore, NZ _____ From: John Rowe [mailto:jarowe at westnet.com.au] Sent: Thursday, 30 March 2017 12:30 p.m. To: healey List Subject: [Healeys] Fwd: Not Healey related but Formula Junior history Hi All Would anyone be able to recognise the car and or the track where this photo was taken. Somewhere in NE USA I think. I need this info to placate FIA re my Lotus 18. Any info or ideas welcome Cheers from West OZ John Rowe -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 30 15:05:53 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 14:05:53 -0700 Subject: [Healeys] 1/4 scale Novi v8 https://macsmotorcitygarage.com/video-quarter-scale-novi-v8-by-ron-colonna-hear-it-sing/ Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Thu Mar 30 20:36:37 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Thu, 30 Mar 2017 19:36:37 -0700 Subject: [Healeys] cost in today's $ References: In 1968 I paid $800 dollars for a 1962 tricarb. After painting a couple of times, rebuilding the engine and redoing the interior (in vinyl) I sold it in 1973 for $3,000. It also had a hard top. John Spaur From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 30, 2017 9:02 AM To: Ahealey help Subject: [Healeys] cost in today's $ was curious how much healey cost in today's money Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 51673 bytes Desc: not available URL: From rchaskell at earthlink.net Fri Mar 31 17:50:06 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Fri, 31 Mar 2017 19:50:06 -0400 Subject: [Healeys] For your fireplace mantel Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php From eyera3000 at gmail.com Fri Mar 31 18:41:41 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 31 Mar 2017 17:41:41 -0700 Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> nice of then to throw in free shipping if you came up with the $10K to buy it Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 31, 2017 at 4:50 PM, Bob Haskell wrote: > Anyone know the history of this? > > http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROF > EO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash= > item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr > > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jstmorris at yahoo.com Fri Mar 31 19:03:17 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 1 Apr 2017 01:03:17 +0000 (UTC) Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> Hi Bob;? Attached is a little bit of research I did last month.? It may help a little. ?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 31, 2017 8:15 PM, Bob Haskell wrote: Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia Coppa Delle Trophy-D.M.Healey [eBay 17-02-28].doc Type: application/msword Size: 565248 bytes Desc: not available URL: From jstmorris at yahoo.com Fri Mar 31 19:06:10 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 1 Apr 2017 01:06:10 +0000 (UTC) Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> And here are a couple of other files.?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 31, 2017 8:15 PM, Bob Haskell wrote: Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia [Safety Fast 1962-12].doc Type: application/msword Size: 3602432 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia-Photos-Revs Inst.doc Type: application/msword Size: 294400 bytes Desc: not available URL: From airtightproductions at icloud.com Wed Mar 1 10:21:25 2017 From: airtightproductions at icloud.com (Steven Kingsbury) Date: Wed, 01 Mar 2017 17:21:25 +0000 (GMT) Subject: [Healeys] LA Visit Ira, Not sure of the LBC stuff going on as I no longer live in that area, but if you like to look at cars, I suggest a trip to the Nethercutt Museum. http://www.nethercuttcollection.org/ It's free and amazing. Check them out online and if you can, make the appointment to take the guided tour, again, it's free. Also there is the Mullin Museum out in Oxnard. http://mullinautomotivemuseum.com/ It is totally French cars and there is an admission price, not sure what it is and there is also the Murphy Museum almost right next door. http://www.murphyautomuseum.org/ And then you can contact the Southern California Austin Healey club and see if there's anything going on there. http://www.austin-healey.org/ Good luck and have fun! Steven Kingsbury BN1 #598 On Feb 28, 2017, at 01:54 PM, i erbs wrote: I'm going to be in LA April 1-5 and was wondering if there is any LBC stuff going on? I want to visit the refurbished Petersen Museum, but what else? I'll be staying in the San Fernado Valley. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Wed Mar 1 10:50:23 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 1 Mar 2017 09:50:23 -0800 Subject: [Healeys] LA Visit References: <119c0c59-27f5-49d8-815b-28030e0ec5aa@me.com> I have been to the first two, but have not heard of the Murphy Museum. Looks like it's worth checking out. Thanks Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Wed, Mar 1, 2017 at 9:21 AM, Steven Kingsbury < airtightproductions at icloud.com> wrote: > Ira, > Not sure of the LBC stuff going on as I no longer live in that area, but > if you like to look at cars, I suggest a trip to the Nethercutt Museum. > http://www.nethercuttcollection.org/ It's free and amazing. Check them > out online and if you can, make the appointment to take the guided tour, > again, it's free. Also there is the Mullin Museum out in Oxnard. > http://mullinautomotivemuseum.com/ It is totally French cars and there > is an admission price, not sure what it is and there is also the Murphy > Museum almost right next door. http://www.murphyautomuseum.org/ > And then you can contact the Southern California Austin Healey club and > see if there's anything going on there. http://www.austin-healey.org/ > Good luck and have fun! > Steven Kingsbury > BN1 #598 > > On Feb 28, 2017, at 01:54 PM, i erbs wrote: > > I'm going to be in LA April 1-5 and was wondering if there is any LBC > stuff going on? I want to visit the refurbished Petersen Museum, but what > else? I'll be staying in the San Fernado Valley. > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ > airtightproductions at icloud.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydohdahman at gmail.com Wed Mar 1 22:07:05 2017 From: healeydohdahman at gmail.com (1 2) Date: Wed, 1 Mar 2017 22:07:05 -0700 Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjhco at att.net Thu Mar 2 07:26:06 2017 From: rjhco at att.net (Richard J. Hockert) Date: Thu, 2 Mar 2017 08:26:06 -0600 Subject: [Healeys] Engine Rebuild Modifications References: How much $$$$$ do you have to spend? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of 1 2 Sent: Wednesday, March 01, 2017 11:07 PM To: Ahealey help Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 2 08:22:01 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 2 Mar 2017 16:22:01 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 2, 2017 at 6:07 AM 1 2 wrote: > > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From al at bighealey.org Thu Mar 2 08:23:12 2017 From: al at bighealey.org (Al Fuller) Date: Thu, 2 Mar 2017 10:23:12 -0500 Subject: [Healeys] Engine Rebuild Modifications References: What are you trying to accomplish? More power? High reliability? Originality? Drivability? Other particular needs/wants? Al Fuller al at bighealey dot org '65 BJ-8 '85 Rx-7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of 1 2 Sent: Thursday, March 2, 2017 12:07 AM To: Ahealey help Subject: [Healeys] Engine Rebuild Modifications Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 2 09:56:51 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 2 Mar 2017 17:56:51 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> I should mention I've had Pertronix electronic 'points' in my BJ8 for years. Electronic/computer control and fuel injection--now, electronically controlled--are the two most significant improvements to the internal combustion engine. -------------------------------- Bob Spidell - San Jose, CA > On March 2, 2017 at 4:22 PM Bob Spidell wrote: > > > Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: > > > * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters > * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality > * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) > * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. > * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification > * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' > * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem > > I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > > > On March 2, 2017 at 6:07 AM 1 2 wrote: > > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From per at schoerner.se Thu Mar 2 11:19:36 2017 From: per at schoerner.se (Per Schoerner) Date: Thu, 2 Mar 2017 19:19:36 +0100 Subject: [Healeys] Engine Rebuild Modifications References: Sleeve the oil channels, especially the one that goes across the block and the one that goes up to the cylinder head. To avoid oil leaking into the water ways. Per Skickat fr?n min iPhone > 2 mars 2017 kl. 06:07 skrev 1 2 : > > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at schoerner.se > From healeybruce at roadrunner.com Thu Mar 2 16:06:56 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Thu, 2 Mar 2017 15:06:56 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> Good list, Bob. When completed, my engine will have the Denis Welch DWR1 cam, bucket tappets, hollow push rods, DW 85mm pistons, DW lightened flywheel and a diaphragm style 9.5? Jaguar clutch, along with the DW high capacity oil pump I already had installed. The floor of the water jacket has also been epoxied to seal any possible leaks from the oil gallery. My exhaust manifolds were previously Jet-Hot coated, but Jet-Hot has since been through bankruptcy and is not owned by another company, though still operating under that brand. With this rebuild, I am using a company called IA Coatings in Houston for ceramic coating of the exhaust and intake manifolds. The transmission has been rebuilt with DW 1st, reverse and cluster gears, synchros, with a new hardened DW gear lever. I also use modern K&N oil and air filters. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Thursday, March 02, 2017 7:22 AM To: Ahealey help ; 1 2 Subject: Re: [Healeys] Engine Rebuild Modifications Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. Bob -------------------------------- Bob Spidell - San Jose, CA Hi All, Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From jc9821 at msn.com Thu Mar 2 17:37:46 2017 From: jc9821 at msn.com (John and Judy Carter) Date: Fri, 3 Mar 2017 00:37:46 +0000 Subject: [Healeys] Healeys Digest, Vol 10, Issue 63 References: Mark Schneider is out of town and may not be receiving emails. Sent from my iPhone > On Feb 24, 2017, at 1:05 PM, "healeys-request at autox.team.net" wrote: > > Send Healeys mailing list submissions to > healeys at autox.team.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://autox.team.net/mailman/listinfo/healeys > or, via email, send a message with subject or body 'help' to > healeys-request at autox.team.net > > You can reach the person managing the list at > healeys-owner at autox.team.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Healeys digest..." > > > Today's Topics: > > 1. Re: removing the 8-way flasher box (kerry) > 2. AH Club USA - membership renewal. Help? (Bluehealey) > 3. Re: AH Club USA - membership renewal. Help? (Bob Spidell) > 4. Re: AH Club USA - membership renewal. Help? (E.A. Driver) > 5. Re: AH Club USA - membership renewal. Help? (Jean Caron) > 6. Trans oil foaming (Roger Grace) > 7. Heat Shield Install (R. Lindsay) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 23 Feb 2017 20:40:47 -0800 > From: "kerry" > To: > Subject: Re: [Healeys] removing the 8-way flasher box > Message-ID: <008201d28e58$2c822a80$85867f80$@shaw.ca> > Content-Type: text/plain; charset="us-ascii" > > Thanks for the idea of going through the back to replace the flasherbox..I > had thought about backing the two top scews out from the wheel well access > just couldn't figure out how to get them back in after installing new box > .maybe staring at it for a couple more months will help..darn air hose ! > > > > Right now I only make left turnsJ > > > > Kerry > > BT7 > > Victoria BC > > > > From: Jean Caron [mailto:vintage_roadster_restoration at hotmail.com] > Sent: February 22, 2017 3:16 PM > To: Bob Spidell; healeys at autox.team.net > Subject: Re: [Healeys] removing the 8-way flasher box > > > > Bob, > > No these boxes are not sealed, they have three prongs, two at one end and > one at the other that hold the cover in place. As Bruce Steele, I had done > an article on these a while ago for Healey Marque, and I have done about a > dozen of these and they are still working well and the outside liiks > original. > > > > Jean > > > > _____ > > From: Healeys on behalf of Bob Spidell > > Sent: February 22, 2017 4:39 PM > To: healeys at autox.team.net > Subject: Re: [Healeys] removing the 8-way flasher box > > > > Are these boxes sealed? We got into ours from a BN2, and had to drill out a > couple spot welds. > > After installing a new harness, the turn indicators didn't function > properly. 'Assuming' the problem was in the relay box, we opened it up only > to find out later the harness had a couple wires mislabeled (wrong > color/trace). This really pissed me off as otherwise I had the harness > wired 100% correct (not to mention 'violating' an original flasher box). > > Bob > > > > On 2/22/2017 8:04 AM, i erbs wrote: > > I don't have my air hoses in place yet, so It is a straight shot to the top > nuts. My mechanic removed mine and cleaned and adjusted the internal points. > It gets rusty in there. So Simon, you might take a look inside once you get > it out and I would bet you will find rust and crud in there. Using a > multi-meter you should be able to check the contacts. > > > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Wed, Feb 22, 2017 at 7:21 AM, Bruce Steele > wrote: > > Simon, I've had mine out twice, most recently last weekend when I replaced > it while the engine is out for a rebuild (it was a lot easier to sit in the > engine bay than reach over!). Using a long thin flat blade screwdriver, > loosen the terminals one at a time. I was perhaps fortunate that my wires > are basically "trained" to lay in order so keeping them straight was not a > problem, but if in doubt label them first. Ira's right-seeing the color > codes can be tricky unless everything is really clean! Remove the bottom > screw last. Removing the top 2 screws is the problem as they are blocked by > the air trunking. If there is no way to get to them from the front, and > there probably isn't, you can drill them out through the captive nuts in the > wheel well. Yes, that ruins the nuts, but there is an easy solution to > that. Before reinstalling the relay unit, put 2 U-type spring clip speed > nuts on the flange over the outboard holes. Install the bottom machine > screw to finger tight to hold the unit in place, then use 2 sheet metal > screws through the drilled out nuts to secure the top. Or 1 screw-I'm > pretty sure 3 screws in that is overkill. You may have to move the unit > slightly side to side to line up the holes, but it will work fine and is > much easier than trying to go in from the front. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs > Sent: Tuesday, February 21, 2017 9:19 AM > To: Simon Lachlan > Cc: Pierre Henri Claret ; Healey List > > Subject: Re: [Healeys] removing the 8-way flasher box > > > > try using a 1/4 drive ratchet and extension with a knuckle in between the > extensions > > I would mark the wires in case the color coding is hard to read. > > > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Tue, Feb 21, 2017 at 7:30 AM, Simon Lachlan > wrote: > > My car is RHD so accessing that wretched thing is easy enough by Healey > standards. Nothing much above it. However it seems that my nephew may have > to remove his from his LHD '64 BJ8. So the brake fluid reservoir is in the > way, plus its pipework and the steering column...or is that a bit lower? > > Anyhow, can one get the 8-way box out without a major kerfuffle or what does > one have to do? Just grow tiny treble jointed wrists and elbows? The usual > in fact.. > > Thanks, > > Simon > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com > > > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 2 > Date: Fri, 24 Feb 2017 10:10:21 -0000 > From: "Bluehealey" > To: > Subject: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: <059801d28e86$35ed6d40$a1c847c0$@gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Team. > > This is a shout out to report a problem with the Austin Healey Club USA > (Healey.org) website. I'm trying to renew my membership and the site isn't > accepting my username/password. I know they are correct as they are written > down in my secrets stash and also cached in my Chrome browser. > > On trying to exercise the 'forgotten password' link, that also fails as the > 'Captcha' applet appears to be broken too. > > > > Any suggestions what the quick and dirty might be to get membership renewed > as it expired 3 days ago (according to my Outlook calendar) and I don't want > to miss my magazine fix? > > Cheers all. > > > > AlanB > > cid:image001.png at 01D18856.FC90FB60 > > > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image001.png > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 3 > Date: Fri, 24 Feb 2017 06:20:33 -0800 > From: Bob Spidell > To: healeys at autox.team.net > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hmmm ... Didn't find any webmaster info, but the President's--Mark > Schneider--phone# is on the 'Contact Us' page: 503-643-7208 > > I'd say this is an emergency; go straight to the top! > > Bob > > >> On 2/24/2017 2:10 AM, Bluehealey wrote: >> >> Team. >> >> This is a shout out to report a problem with the Austin Healey Club >> USA (Healey.org) website. I?m trying to renew my membership and the >> site isn?t accepting my username/password. I know they are correct as >> they are written down in my secrets stash and also cached in my Chrome >> browser. >> >> On trying to exercise the ?forgotten password? link, that also fails >> as the ?Captcha? applet appears to be broken too. >> >> Any suggestions what the quick and dirty might be to get membership >> renewed as it expired 3 days ago (according to my Outlook calendar) >> and I don?t want to miss my magazine fix? >> >> Cheers all. >> >> AlanB >> >> cid:image001.png at 01D18856.FC90FB60 >> >> >> >> Virus-free. www.avast.com >> >> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 4 > Date: Fri, 24 Feb 2017 09:14:00 -0600 > From: "E.A. Driver" > To: healeys at autox.team.net > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: <48e19606-dba8-daeb-852b-7d9f4b793968 at sasktel.net> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Bob and Alan > > The web master of AHCUSA is Tracy Drummond his email address is > bighealey AT charter.net and > membership director is Mark Schneider Marksbj8 AT icloud.,com > > Cheers > Ed > Saskatoon, Saskatchewan > > > > >> On 24/02/2017 8:20 AM, Bob Spidell wrote: >> >> Hmmm ... Didn't find any webmaster info, but the President's--Mark >> Schneider--phone# is on the 'Contact Us' page: 503-643-7208 >> >> I'd say this is an emergency; go straight to the top! >> >> Bob >> >> >>> On 2/24/2017 2:10 AM, Bluehealey wrote: >>> >>> Team. >>> >>> This is a shout out to report a problem with the Austin Healey Club >>> USA (Healey.org) website. I?m trying to renew my membership and the >>> site isn?t accepting my username/password. I know they are correct as >>> they are written down in my secrets stash and also cached in my >>> Chrome browser. >>> >>> On trying to exercise the ?forgotten password? link, that also fails >>> as the ?Captcha? applet appears to be broken too. >>> >>> Any suggestions what the quick and dirty might be to get membership >>> renewed as it expired 3 days ago (according to my Outlook calendar) >>> and I don?t want to miss my magazine fix? >>> >>> Cheers all. >>> >>> AlanB >>> >>> cid:image001.png at 01D18856.FC90FB60 >>> >>> >>> >>> Virus-free. www.avast.com >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Support Team.Nethttp://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive:http://www.team.net/archive >>> Forums:http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >>> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: image/png > Size: 14962 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 5 > Date: Fri, 24 Feb 2017 15:58:58 +0000 > From: Jean Caron > To: Bluehealey , "healeys at autox.team.net" > > Subject: Re: [Healeys] AH Club USA - membership renewal. Help? > Message-ID: > > > Content-Type: text/plain; charset="windows-1252" > > Perhaps send a message to Tracy Drummond at bighealey at charter.net, he looks after the website. I just renewed my membership 4 days ago and has no problem. > > > Jean > > > ________________________________ > From: Healeys on behalf of Bluehealey > Sent: February 24, 2017 10:10 AM > To: healeys at autox.team.net > Subject: [Healeys] AH Club USA - membership renewal. Help? > > > Team. > > This is a shout out to report a problem with the Austin Healey Club USA (Healey.org) website. I?m trying to renew my membership and the site isn?t accepting my username/password. I know they are correct as they are written down in my secrets stash and also cached in my Chrome browser. > > On trying to exercise the ?forgotten password? link, that also fails as the ?Captcha? applet appears to be broken too. > > > > Any suggestions what the quick and dirty might be to get membership renewed as it expired 3 days ago (according to my Outlook calendar) and I don?t want to miss my magazine fix? > > Cheers all. > > > > AlanB > > [cid:image001.png at 01D18856.FC90FB60] > > > > [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif] Virus-free. www.avast.com > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image001.png > Type: image/png > Size: 14962 bytes > Desc: image001.png > URL: > > ------------------------------ > > Message: 6 > Date: Fri, 24 Feb 2017 08:18:10 -0800 > From: "Roger Grace" > To: "Healey List" > Subject: [Healeys] Trans oil foaming > Message-ID: <8515F329CB4643728B47B2F3B9EA5C52 at WINDOWST93OFP9> > Content-Type: text/plain; charset="utf-8" > > I recently had the OD on my BJ8 apart to replace some parts ? bearing/accumulator/gaskets/O rings etc. > For a first sort of sacrificial oil fill I decided to use a non detergent Castrol 30 wt oil. Date codes less than 18 months old. Plan was to switch to the expensive Redline MT90 after testing and after a few hundred miles. This 30 WT oil is often recommended by OD experts. I have built an electric variable speed rest rid to be able to test the transmission outside the car. > Overdrive worked fine and transmission sounded OK and ran it for about 2 hours to get the temp up (52C on OD case) and hunt for leaks. > So far so good. > > Then after a few days of standing, and 2 minutes of running, I drained the oil (to fix a leak) and was amazed to see that the oil had foamed badly and there were big classic fish eye bubbles on the surface of the oil. Ambient was about 14C. I did note that the oil coming out of the transmission was somewhat foamier than that from the overdrive drain plug. > See enclosed pix. > After standing overnight the oil looked normal again. > > What disturbs me is that unless I had drained the oil I would not have been aware of the foaming and put it into service .... > Have now replaced with the MT90 that shows no sign of foaming on the dip stick. > Wonder if others have any ideas about this weird phenomenon and is it a concern ? > rg > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170128_122945.jpg > Type: image/jpeg > Size: 121928 bytes > Desc: not available > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170127_210053.jpg > Type: image/jpeg > Size: 336102 bytes > Desc: not available > URL: > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: 20170127_210045.jpg > Type: image/jpeg > Size: 187940 bytes > Desc: not available > URL: > > ------------------------------ > > Message: 7 > Date: Fri, 24 Feb 2017 11:02:06 -0700 > From: "R. Lindsay" <050.rpl at gmail.com> > To: Healey List > Subject: [Healeys] Heat Shield Install > Message-ID: <889A0377-D268-4526-BE91-9DF490CE0CA2 at gmail.com> > Content-Type: text/plain; charset=us-ascii > > I would like to replace the heat shields in the engine bay of my BJ8. Is it possible with the engine in place? There are three screws across the one on the fire wall how do I get to the middle one? Can the foot well pieces be accessed from below? > > Any words of wisdom or direction would be wonderful. Thanks in advance. > > Price Lindsay > 67 BJ8 > > Sent from my iPhone > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Healeys mailing list > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > > ------------------------------ > > End of Healeys Digest, Vol 10, Issue 63 > *************************************** From bspidell at comcast.net Thu Mar 2 20:37:42 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 3 Mar 2017 04:37:42 +0100 (CET) Subject: [Healeys] Engine Rebuild Modifications References: <1868043664.795203.1488468122524@connect.xfinity.com> <047701d293a9$b0d71f10$12855d30$@roadrunner.com> And get a spin-on oil filter adapter so you have time to do all the fun stuff ;) -------------------------------- Bob Spidell - San Jose, CA > On March 3, 2017 at 1:13 AM David Nock BCS wrote: > > Top it off with a Mallory distributor and MSD ignition and you are rocking it. The final the cooling system off with an aluminium radiator. > > David Nock > British Car Specialists > 209-948-8767 > www.britishcarspecialists.com > > From: Bruce Steele mailto:healeybruce at roadrunner.com > Sent: Thursday, March 02, 2017 3:06 PM > To: 'Bob Spidell' mailto:bspidell at comcast.net ; 'Ahealey help' mailto:healeys at autox.team.net ; '1 2' mailto:healeydohdahman at gmail.com > Subject: Re: [Healeys] Engine Rebuild Modifications > > > Good list, Bob. When completed, my engine will have the Denis Welch DWR1 cam, bucket tappets, hollow push rods, DW 85mm pistons, DW lightened flywheel and a diaphragm style 9.5? Jaguar clutch, along with the DW high capacity oil pump I already had installed. The floor of the water jacket has also been epoxied to seal any possible leaks from the oil gallery. > > > > My exhaust manifolds were previously Jet-Hot coated, but Jet-Hot has since been through bankruptcy and is not owned by another company, though still operating under that brand. With this rebuild, I am using a company called IA Coatings in Houston for ceramic coating of the exhaust and intake manifolds. > > > > The transmission has been rebuilt with DW 1st, reverse and cluster gears, synchros, with a new hardened DW gear lever. > > > > I also use modern K&N oil and air filters. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell > Sent: Thursday, March 02, 2017 7:22 AM > To: Ahealey help ; 1 2 > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > Well, the snide answer is: "If you want a 'modern' engine, buy a modern car." But, there are things you can do to a Healey engine to (marginally) improve performance and reliability without changing the essence of the car. Here's some of the things I did for a recent rebuild: > > > > * Denis Welch DWR1 cam. This cam is 'slightly better' than a stock BJ8 cam, and is gun-drilled to provide extra oil to the lobes and lifters > * 84.5mm Omega forged pistons. Way overkill for a street engine, but I couldn't find 'out-of-the-box' pistons that were of sufficient quality with 'modern' features like the 'latest ring design'--the top ring is about 1/16" thick!--from any of the usual suspects. My builder was impressed with both the cam and the pistons; the pistons were not much more than half the weight of the older, more-or-less stock pistons, and the cam was of extraordinary quality > * DWR high capacity oil pump with upgraded shaft (DWR sells this shaft and thrust washer for about half of the 'usual suspects,' esp. with the favorable exchange rate) > * adjustable vernier timing set. My builder said it took almost 4deg to dial in the cam perfectly. Timing set is of excellent quality. > * fully engineered PCV 'system.' Still just sucks gasses from the crankcase, but my builder designed piping to equalize flow to both carbs, and I can run K&N filters without modification > * instead of cork and fiber ('cigarette') gaskets, my builder used a modern sealant ('Right Stuff') to seal the rear main, engine plate and pan. Several hours on the test stand and 'hasn't leaked a drop' > * Jet-Hot coated exhaust manifold. I believe ethanol-blend fuel was causing some stumbling on hot starts and I'm hoping this solves the problem > > I have some video of the engine running on the test stand (LARGE files), and my builder wrote a detailed list of all the work he did to make a strong and reliable street engine. If anybody's interested I'll scan the list and post URLs to the video, but I can't do it until I get home Saturday. > > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > > > > > On March 2, 2017 at 6:07 AM 1 2 wrote: > > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 engine/transmission to modernize it? > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net mailto:Healeys at autox.team.net > > http://autox.teamnet/mailman/listinfo/healeys http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > > > > --------------------------------------------- > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Thu Mar 2 21:23:32 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Fri, 3 Mar 2017 04:23:32 +0000 Subject: [Healeys] Healeys Digest, Vol 10, Issue 63 References: , Mark is home but very busy with other Club matters. I have talked with him today and he is leaving in one week for a 2 week period. Both he and Tracy are aware of the problems with the website, he told me it works for some and not for others and they are working on it. Jean ________________________________ From: Healeys on behalf of John and Judy Carter Sent: March 3, 2017 12:37 AM To: healeys at autox.team.net Subject: Re: [Healeys] Healeys Digest, Vol 10, Issue 63 Mark Schneider is out of town and may not be receiving emails. Sent from my iPhone -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Fri Mar 3 01:56:54 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Fri, 3 Mar 2017 08:56:54 +0000 Subject: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 engine/transmission >> to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig From austinhealeyslist at gmail.com Fri Mar 3 02:40:35 2017 From: austinhealeyslist at gmail.com (Austin Healeys List) Date: Fri, 3 Mar 2017 22:40:35 +1300 Subject: [Healeys] cockpit finisher rail nuts Does anyone know what sort of nuts are used on the two left/right side forward ali cockpit trim rail screws behind the shut pillars on a BN4? The others going around the rear have J shaped brackets but there doesn't appear to be enough room to get them in behind the shroud at the front. The parts listings don't seem to show anything. Andy. From josef-eckert at t-online.de Fri Mar 3 05:56:28 2017 From: josef-eckert at t-online.de (josef-eckert at t-online.de) Date: Fri, 3 Mar 2017 13:56:28 +0100 (MET) Subject: [Healeys] cockpit finisher rail nuts References: No nuts, same screws as on the door trim rails. -----Original-Nachricht----- Betreff: [Healeys] cockpit finisher rail nuts Datum: 2017-03-03T11:11:30+0100 Von: "Austin Healeys List" An: "healeys at autox.team.net" Does anyone know what sort of nuts are used on the two left/right side forward ali cockpit trim rail screws behind the shut pillars on a BN4? The others going around the rear have J shaped brackets but there doesn't appear to be enough room to get them in behind the shroud at the front. The parts listings don't seem to show anything. Andy. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ? From healeybruce at roadrunner.com Fri Mar 3 07:59:56 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Fri, 3 Mar 2017 06:59:56 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> Good point. Everyone that I know who has Putzke's Fahrpass tube shock conversion loves it. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Peter Dzwig Sent: Friday, March 03, 2017 12:57 AM To: Healey Subject: Re: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 >> engine/transmission to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html Suggested annual >> donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com From healeydoc at sbcglobal.net Fri Mar 3 09:12:30 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Fri, 3 Mar 2017 08:12:30 -0800 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> This list could go on and on and on, and most all on them are reversable if you want to go back to original. Tube shocks front and rear Torrington Bearings in front upper trunnions Heavy duty sway bars front and rear Torque bars on rear end Headers New steering column worm to eliminate slop Retractable seat belts Inertia fuel pump cut off Cruise control Power brakes on the earlier cars Aluminium Radiator with or without pusher fan LED strip underdash lighting Power supply outlets David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com -----Original Message----- From: Bruce Steele Sent: Friday, March 03, 2017 6:59 AM To: pdzwig at summaventures.com ; 'Healey' Subject: Re: [Healeys] Engine Rebuild Modifications Good point. Everyone that I know who has Putzke's Fahrpass tube shock conversion loves it. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Peter Dzwig Sent: Friday, March 03, 2017 12:57 AM To: Healey Subject: Re: [Healeys] Engine Rebuild Modifications It all depends what YOU want out of the exercise. Interesting that no-one has mentioned handling and ride comfort. I would do the usual mods to the engine, with the DW cam or similar (I used a version of the race version of the BJ8 cam which went really well because it was tailored to my requirements). High compression pistons work well with a modern-fuel-compatible head and modern set up. Personally I used Hepolites Lighten as much as poss and make sure it is all balanced and that whatever your heating/cooling needs are, are taken care of and make sure that you avoid excessive heat to the fuel lines. Carbs can be whatever you want. Personally I like SUs but not everyone does. I mention ride because when you have done all that you do to your engine and transmission, it has to be usable when you drive it. I drove a couple of Healeys recently both of which had more power than they could reasonably handle over the sort of roads we were on. Look at your suspension carefully and make sure that you get the level of firmness that YOU want. I used poly bushes, anti-roll bars and tinkered with bits to get a ride that was good enough to impress the late Alan Cameron storming up Prescott (which he ran at the time). Peter >> On March 2, 2017 at 6:07 AM 1 2 wrote: >> >> Hi All, >> >> Is there a list of commonly done rebuild mods for the 3000 >> engine/transmission to modernize it? >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html Suggested annual >> donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> -- =========================================================== Dr Peter Dzwig _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net From austinhealeyslist at gmail.com Fri Mar 3 12:58:33 2017 From: austinhealeyslist at gmail.com (Austin Healeys List) Date: Sat, 4 Mar 2017 08:58:33 +1300 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> These are all available as a pre-assembled kit now, search for part number mx5 On 3/4/17, David Nock BCS wrote: > This list could go on and on and on, and most all on them are reversable if > > you want to go back to original. > Tube shocks front and rear > Torrington Bearings in front upper trunnions > Heavy duty sway bars front and rear > Torque bars on rear end > Headers > New steering column worm to eliminate slop > Retractable seat belts > Inertia fuel pump cut off > Cruise control > Power brakes on the earlier cars > Aluminium Radiator with or without pusher fan > LED strip underdash lighting > Power supply outlets From boyracer466 at gmail.com Fri Mar 3 17:47:11 2017 From: boyracer466 at gmail.com (richard mayor) Date: Fri, 3 Mar 2017 16:47:11 -0800 Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. [image: Inline image 1] -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3841.jpg Type: image/jpeg Size: 2173950 bytes Desc: not available URL: From cnaarndt at gmail.com Sat Mar 4 09:23:57 2017 From: cnaarndt at gmail.com (Curtis Arndt) Date: Sat, 4 Mar 2017 08:23:57 -0800 Subject: [Healeys] Parts Wanted and for Sale Listers, I'm in need of a BN1/2 distributor drive spindle. I have a good distributor, so if anyone has an old busted up distributor that they'd be willing to part with I'd be interested. Also a friend has a set of four early, flat hub BN1 wire wheels for sale. I may already have a buyer, but if this falls through. is anyone needing a set? I don't have a price yet but the condition is described as very good, and I hope to have photos in a week. Cheers, Curt Arndt Carlsbad, CA '55 BN1, '60 AN5 :{) '72 RWA MG Midget, '06 Cooper S -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Sat Mar 4 10:24:51 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sat, 4 Mar 2017 12:24:51 -0500 Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From llennep at verizon.net Sat Mar 4 11:51:38 2017 From: llennep at verizon.net (llennep at verizon.net) Date: Sat, 04 Mar 2017 12:51:38 -0600 (CST) Subject: [Healeys] Heat Shields In 2000 or so I found material like the orig stuff. It came from a local boiler supply house. Looked exactly like the orig. I merely cut it and covered it with a few coats of a clear coat, not sure of its composition right now. Turned out perfectly. Keith On 03/04/17, R. Lindsay <050.rpl at gmail.com> wrote: I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From sentenac.rw at gmail.com Sat Mar 4 11:58:47 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sat, 04 Mar 2017 10:58:47 -0800 Subject: [Healeys] Heat Shields References: It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From 050.rpl at gmail.com Sat Mar 4 12:01:44 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sat, 4 Mar 2017 14:01:44 -0500 Subject: [Healeys] Heat Shields References: Thank you Roland. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 4, 2017, at 1:58 PM, sentenac.rw at gmail.com wrote: > > It is a two-part refinishing process. First part is two coats of > Rustoleum Clean Metal Primer 7780830. Then you apply a very light > coat of MinWax Polyurethane Clear Satin to seal the surface and make > it cleanable. Both are spray cans and each can contains enough for a > dozen cars :-) You don't want the urethane to look shiny. The > instructions are included with Moss's kit. The primer is a nice > off-white that Roger found to match the original color. > > -Roland > BN1 #724 with heat shields installed but not ready for the road > >> On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >> >> I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? >> >> Thank you in advance. >> >> Price Lindsay >> 67 BJ8 >> > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > From jmsdarch at sbcglobal.net Sat Mar 4 12:32:18 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 4 Mar 2017 11:32:18 -0800 Subject: [Healeys] Heat Shields References: White high temperature paint. John Spaur 62? BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 4, 2017 9:25 AM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Sat Mar 4 12:51:08 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Sat, 4 Mar 2017 11:51:08 -0800 (PST) Subject: [Healeys] BJ8 door latch weld repair Someone, I think Len had a repair for a worn BJ8 door latch. Mine wobbles on its shaft. I am thinking to grind a small v around the pivot pin into the latch plate and then weld into the v. Any other suggestions?Thanks,Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Sat Mar 4 13:52:19 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Sat, 4 Mar 2017 20:52:19 +0000 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> Glad to be of help. That's what the list is for.# Peter PS Please ignore the spam warning. I have changed ISP and it is giving me headaches. Advice on sorting it out would be appreciated! On 03/03/2017 21:29, 1 2 wrote: > Many thanks to those that have answered and been patient with this. Of course > there is no one size fits all answer, but a lot of food for thought. The > comments from Peter and others hit the nail on the head for me - I dither > mightily because of the need to balance all the factors. This is a great list > to start from for ideas to build a plan. > > On Fri, Mar 3, 2017 at 9:12 AM, David Nock BCS > This list could go on and on and on, and most all on them are reversable if > you want to go back to original. > Tube shocks front and rear > Torrington Bearings in front upper trunnions > Heavy duty sway bars front and rear > Torque bars on rear end > Headers > New steering column worm to eliminate slop > Retractable seat belts > Inertia fuel pump cut off > Cruise control > Power brakes on the earlier cars > Aluminium Radiator with or without pusher fan > LED strip underdash lighting > Power supply outlets > > > David Nock > British Car Specialists > 209-948-8767 > www.britishcarspecialists.com > > > -----Original Message----- From: Bruce Steele > Sent: Friday, March 03, 2017 6:59 AM > > Subject: Re: [Healeys] Engine Rebuild Modifications > > Good point. Everyone that I know who has Putzke's Fahrpass tube shock > conversion loves it. > > Bruce Steele > Brea, CA > 1960 BN7 > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net > Dzwig > Sent: Friday, March 03, 2017 12:57 AM > Subject: Re: [Healeys] Engine Rebuild Modifications > > It all depends what YOU want out of the exercise. > > Interesting that no-one has mentioned handling and ride comfort. > > I would do the usual mods to the engine, with the DW cam or similar (I used > a version of the race version of the BJ8 cam which went really well because > it was tailored to my requirements). High compression pistons work well with > a modern-fuel-compatible head and modern set up. Personally I used Hepolites > Lighten as much as poss and make sure it is all balanced and that whatever > your heating/cooling needs are, are taken care of and make sure that you > avoid excessive heat to the fuel lines. Carbs can be whatever you want. > Personally I like SUs but not everyone does. > > I mention ride because when you have done all that you do to your engine and > transmission, it has to be usable when you drive it. I drove a couple of > Healeys recently both of which had more power than they could reasonably > handle over the sort of roads we were on. Look at your suspension carefully > and make sure that you get the level of firmness that YOU want. I used poly > bushes, anti-roll bars and tinkered with bits to get a ride that was good > enough to impress the late Alan Cameron storming up Prescott (which he ran > at the time). > > Peter > > > > On March 2, 2017 at 6:07 AM 1 2 > Hi All, > > Is there a list of commonly done rebuild mods for the 3000 > engine/transmission to modernize it? > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation > $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeydohdahman at gmail.com > > > -- =========================================================== Dr Peter Dzwig From ahbn6 at verizon.net Sat Mar 4 14:13:30 2017 From: ahbn6 at verizon.net (John Sims) Date: Sat, 04 Mar 2017 16:13:30 -0500 Subject: [Healeys] Heat Shields References: Look at: http://healey6.com/replacement_parts.htm It is called hardie board and can be found at Home Depot. Basically it is the waterproof cement impregnated backing used in showers in place of plasterboard. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 04, 2017 12:25 PM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From go2ghill at aol.com Sat Mar 4 16:37:07 2017 From: go2ghill at aol.com (Greg Hill) Date: Sat, 4 Mar 2017 18:37:07 -0500 Subject: [Healeys] Engine rebuild Good list of modifications when rebuilding an engine, but would be interested in hearing about the additional costs for parts and labor. Also can we hear more about adding a Jaguar diaphragm style clutch. Greg Hill 58 BN4 67 BJ8 Sent from AOL Mobile Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From llennep at verizon.net Sat Mar 4 18:11:34 2017 From: llennep at verizon.net (llennep at verizon.net) Date: Sat, 04 Mar 2017 19:11:34 -0600 (CST) Subject: [Healeys] Heat Shields Did not mention it but the stuff I refer to had the same "grid" pattern in it like would appear if it were dried on a wire rack. On 03/04/17, llennep at verizon.net wrote: In 2000 or so I found material like the orig stuff. It came from a local boiler supply house. Looked exactly like the orig. I merely cut it and covered it with a few coats of a clear coat, not sure of its composition right now. Turned out perfectly. Keith On 03/04/17, R. Lindsay <050.rpl at gmail.com> wrote: I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From YNOTINK at msn.com Sat Mar 4 19:31:52 2017 From: YNOTINK at msn.com (WILLIAM B LAWRENCE) Date: Sun, 5 Mar 2017 02:31:52 +0000 Subject: [Healeys] Heat Shields References: , <003601d2952c$2cd434d0$867c9e70$@verizon.net> Instead of the portland cement waterproof wall board called Hardiebacker it is their thinner soffit material. Bill Lawrence BN1 #554 ________________________________ From: Healeys on behalf of John Sims Sent: Saturday, March 4, 2017 9:13:30 PM To: 'R. Lindsay'; 'Healey List' Subject: Re: [Healeys] Heat Shields Look at: http://healey6.com/replacement_parts.htm It is called hardie board and can be found at Home Depot. Basically it is the waterproof cement impregnated backing used in showers in place of plasterboard. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 04, 2017 12:25 PM To: Healey List Subject: [Healeys] Heat Shields I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and can?t find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? Thank you in advance. Price Lindsay 67 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From derek.c.job at gmail.com Sun Mar 5 01:38:04 2017 From: derek.c.job at gmail.com (Derek Job) Date: Sun, 5 Mar 2017 08:38:04 +0000 Subject: [Healeys] Engine Rebuild Modifications References: <30f0d2d6-b942-29db-f28f-14ba41eb7fcb@summaventures.com> <00b401d2942e$d2d9eef0$788dccd0$@roadrunner.com> <479c2f4f-5d6a-8a7b-9ac0-830288b5b780@summaventures.com> ?are these a list of modifications for a Healey or for a Custom Car? On Sat, Mar 4, 2017 at 8:52 PM, Peter Dzwig wrote: > Glad to be of help. That's what the list is for.# > > Peter > > PS Please ignore the spam warning. I have changed ISP and it is giving me > headaches. Advice on sorting it out would be appreciated! > > On 03/03/2017 21:29, 1 2 wrote: > > Many thanks to those that have answered and been patient with this. Of > course > > there is no one size fits all answer, but a lot of food for thought. The > > comments from Peter and others hit the nail on the head for me - I dither > > mightily because of the need to balance all the factors. This is a > great list > > to start from for ideas to build a plan. > > > > On Fri, Mar 3, 2017 at 9:12 AM, David Nock BCS > > > This list could go on and on and on, and most all on them are > reversable if > > you want to go back to original. > > Tube shocks front and rear > > Torrington Bearings in front upper trunnions > > Heavy duty sway bars front and rear > > Torque bars on rear end > > Headers > > New steering column worm to eliminate slop > > Retractable seat belts > > Inertia fuel pump cut off > > Cruise control > > Power brakes on the earlier cars > > Aluminium Radiator with or without pusher fan > > LED strip underdash lighting > > Power supply outlets > > > > > > David Nock > > British Car Specialists > > 209-948-8767 > > www.britishcarspecialists.com > > > > > > -----Original Message----- From: Bruce Steele > > Sent: Friday, March 03, 2017 6:59 AM > 'Healey' > > > > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > Good point. Everyone that I know who has Putzke's Fahrpass tube > shock > > conversion loves it. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > -----Original Message----- > > From: Healeys [mailto:healeys-bounces at autox.team.net > > Dzwig > > Sent: Friday, March 03, 2017 12:57 AM > > Subject: Re: [Healeys] Engine Rebuild Modifications > > > > It all depends what YOU want out of the exercise. > > > > Interesting that no-one has mentioned handling and ride comfort. > > > > I would do the usual mods to the engine, with the DW cam or similar > (I used > > a version of the race version of the BJ8 cam which went really well > because > > it was tailored to my requirements). High compression pistons work > well with > > a modern-fuel-compatible head and modern set up. Personally I used > Hepolites > > Lighten as much as poss and make sure it is all balanced and that > whatever > > your heating/cooling needs are, are taken care of and make sure that > you > > avoid excessive heat to the fuel lines. Carbs can be whatever you > want. > > Personally I like SUs but not everyone does. > > > > I mention ride because when you have done all that you do to your > engine and > > transmission, it has to be usable when you drive it. I drove a > couple of > > Healeys recently both of which had more power than they could > reasonably > > handle over the sort of roads we were on. Look at your suspension > carefully > > and make sure that you get the level of firmness that YOU want. I > used poly > > bushes, anti-roll bars and tinkered with bits to get a ride that was > good > > enough to impress the late Alan Cameron storming up Prescott (which > he ran > > at the time). > > > > Peter > > > > > > > > On March 2, 2017 at 6:07 AM 1 2 > > > Hi All, > > > > Is there a list of commonly done rebuild mods for the 3000 > > engine/transmission to modernize it? > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual > > donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/bspidell@ > comcast.net > > bspidell at comcast.net> > > > > > > -- > > > > =========================================================== > > Dr Peter Dzwig > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation > > $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/healeybruce@ > roadrunner.com > > healeybruce at roadrunner.com> > > > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/healeydoc@ > sbcglobal.net > > healeydoc at sbcglobal.net> > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > http://autox.team.net/mailman/listinfo/healeys > > > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/ > healeydohdahman at gmail.com > > healeydohdahman at gmail.com> > > > > > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/derek.c.job at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Sun Mar 5 08:28:44 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:28:44 -0800 Subject: [Healeys] Heat Shields References: I just installed the Moss kit a couple of weeks ago. Here are a couple of in-progress shots of what they look like finished as described. The kit works very well. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of sentenac.rw at gmail.com Sent: Saturday, March 04, 2017 10:59 AM To: R. Lindsay <050.rpl at gmail.com> Cc: 'Austin Healey list' Subject: Re: [Healeys] Heat Shields It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I've looked through the archives and on John Simm's site and can't find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com -------------- next part -------------- A non-text attachment was scrubbed... Name: 0204171736.jpg Type: image/jpeg Size: 98022 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 0128171559a.jpg Type: image/jpeg Size: 60163 bytes Desc: not available URL: From healeybruce at roadrunner.com Sun Mar 5 08:32:50 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:32:50 -0800 Subject: [Healeys] Heat Shields References: Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to cut the cement board oneself. I know I could not have done nearly as precise a job with a sabre saw and drill. Plus, my old ones were inaccurate and poorly fabricated, and would have made really crappy patterns. The kit is well worth the cost. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Bruce Steele [mailto:healeybruce at roadrunner.com] Sent: Sunday, March 05, 2017 7:29 AM To: 'sentenac.rw at gmail.com' ; 'R. Lindsay' <050.rpl at gmail.com>; 'Austin Healey list' Subject: RE: [Healeys] Heat Shields I just installed the Moss kit a couple of weeks ago. Here are a couple of in-progress shots of what they look like finished as described. The kit works very well. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of sentenac.rw at gmail.com Sent: Saturday, March 04, 2017 10:59 AM To: R. Lindsay <050.rpl at gmail.com> Cc: 'Austin Healey list' Subject: Re: [Healeys] Heat Shields It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make it cleanable. Both are spray cans and each can contains enough for a dozen cars :-) You don't want the urethane to look shiny. The instructions are included with Moss's kit. The primer is a nice off-white that Roger found to match the original color. -Roland BN1 #724 with heat shields installed but not ready for the road On Sat, 4 Mar 2017 12:24:51 -0500, you wrote: >I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I've looked through the archives and on John Simm's site and can't find the note. Does anyone know the finish he used or is there someone that can provide me with a proper finish? > >Thank you in advance. > >Price Lindsay >67 BJ8 > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com From healeybruce at roadrunner.com Sun Mar 5 08:34:12 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 5 Mar 2017 07:34:12 -0800 Subject: [Healeys] Engine mods - Headers References: Very nicely fabricated! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Friday, March 03, 2017 4:47 PM To: healeys Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From sentenac.rw at gmail.com Sun Mar 5 17:02:27 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sun, 05 Mar 2017 16:02:27 -0800 Subject: [Healeys] Heat Shields References: <01d101d295c5$c080ad00$41820700$@roadrunner.com> I'll second Bruce's comment. The Moss kit comes with the parts pre cut so that they will fit against each other as they should. They specially made thick washers would take effort to dublicate. If you are going to make your own parts it will take time and probably a few re-makes. Roger Moment's instructions come with it and are very detailed (and of course based on a lot of experience). If you are going to try to cut Hardi panels of any sort you will create a lot of cement dust and dull blades, and possibly a saw motor worn out by the abrasive dust. Getting inside corners and rectangular slots just right can be challenging, too. Having cut a couple of hundred feet of Hardi siding I speak from experience. Just saying. -Roland BN1 #724 On Sun, 5 Mar 2017 07:32:50 -0800, Bruce wrote: >Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to >cut the cement board oneself. I know I could not have done nearly as >precise a job with a sabre saw and drill. Plus, my old ones were inaccurate >and poorly fabricated, and would have made really crappy patterns. The kit >is well worth the cost. > >Bruce Steele >Brea, CA >1960 BN7 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From bspidell at comcast.net Sun Mar 5 17:13:49 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 5 Mar 2017 16:13:49 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> Single exhaust on a 6-cyl Healey? On 3/5/2017 7:34 AM, Bruce Steele wrote: > > Very nicely fabricated! > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > You need a good set of headers and I have one for sale. > Inline image 1 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From austin.healey at gmail.com Sun Mar 5 22:16:31 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Mon, 6 Mar 2017 16:16:31 +1100 Subject: [Healeys] Engine mods - Headers References: You won't be fitting those into a standard Healey engine bay! Are they special ones to keep your (LHD) feet warm? :-) Sent from my iPhone > On 4 Mar. 2017, at 11:47 am, richard mayor wrote: > > You need a good set of headers and I have one for sale. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > From p_cquinn at tpg.com.au Sun Mar 5 22:23:48 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Mon, 6 Mar 2017 16:23:48 +1100 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <950b2141-66be-f74d-48ad-c50d2d65386f@comcast.net> Hello The very early 100/6 BN4s had a two into one muffler and a single tail pipe. Hoo Roo Patrick Quinn From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Monday, 6 March 2017 11:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Engine mods - Headers Single exhaust on a 6-cyl Healey? On 3/5/2017 7:34 AM, Bruce Steele wrote: Very nicely fabricated! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Friday, March 03, 2017 4:47 PM Subject: [Healeys] Engine mods - Headers You need a good set of headers and I have one for sale. Inline image 1 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/bspidell at comcast.net -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From coudesluijs at chello.nl Mon Mar 6 01:01:56 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Mon, 6 Mar 2017 09:01:56 +0100 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> It is beautifully made but it is a pity the pipes are not equally length and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 joint is not correct. The joining pipe of a smaller diameter than the other. Kees Oudesluijs > Very nicely fabricated! > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > You need a good set of headers and I have one for sale. > Inline image 1 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From pdzwig at summaventures.com Mon Mar 6 02:37:40 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Mon, 6 Mar 2017 09:37:40 +0000 Subject: [Healeys] Engine mods - Headers I wonder what the gas flow dynamics are like with a structure like that. I wouldn't have thought that the flow was very free from a cursory glance. It's those choking bends and the long flat(?) runs that worry me. Patrick is as ever right about these things, 100/6s did use a single exhaust as did works rally cars. Peter -- =========================================================== Dr Peter Dzwig From austin.healey at gmail.com Mon Mar 6 04:39:25 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Mon, 6 Mar 2017 22:39:25 +1100 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> I was being sarcastic about the foot warmers. Seriously Men. 101 exhaust systems theory. You all passed. Now - all you need to do is fit your perfect, identical length pipes inside your body/ chassis structure. Equal lengths, 3 into 2, 2 into 1. Yep Awesome theory. Right out of a Text book. Humor me. This isn't my design. So flush your books, and look again. Focus on the pipe length from the block to the horizontal pipe. Holy shit!! That side pipe is so far away from my engine block..... Then punch yourself in the face. My guess? Extractors to fit like the 1967 RAC car. -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 885755 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On 6 Mar. 2017, at 8:37 pm, Peter Dzwig wrote: > > I wonder what the gas flow dynamics are like with a structure like that. I > wouldn't have thought that the flow was very free from a cursory glance. It's > those choking bends and the long flat(?) runs that worry me. > > Patrick is as ever right about these things, 100/6s did use a single exhaust as > did works rally cars. > > Peter > > -- > > =========================================================== > Dr Peter Dzwig > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > From healeyguy at aol.com Mon Mar 6 13:56:07 2017 From: healeyguy at aol.com (healeyguy at aol.com) Date: Mon, 6 Mar 2017 15:56:07 -0500 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> Listers Headers can play an important part of an engine build and the design of the exhaust system does impact the tune of a car, ?but? the use of the car, grocery getter, daily driver, trailer queen, track or high speed at full throttle dictates what parts you add and the intended benefit those parts may or may not give your build. The headers shown in previous posts will flow better than any stock system. Is it necessary for street cars, probably not. Does it produce 10% more horsepower, maybe. Is that what your after? Maybe the torque curve is more important?.. There is a long list of things to consider when contemplating a change from the stock setup. Aloha Perry 1955 BN2 10.1 to 1 compression on 90 something octane. (Yes Harriet you can run that much compression on the street.) Bench flowed intake and exhaust ports Larger 100-Six valves Reshaped combustion chambers in head 1-3/4 carbs Delta reprofiled cam -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 6 16:09:31 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 6 Mar 2017 23:09:31 -0000 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> <20170306214554.A982925888BA@autox.team.net> We might be going slightly off track here?but I put three HD6s in place of the HS4s on my tricarb. Also a set of headers at the same time. Made a very appreciable difference. Mind you, those original exhaust manifolds are pretty rough old things. Ever looked inside one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeyguy at aol.com Sent: 06 March 2017 20:56 To: Healey Forum Subject: Re: [Healeys] Engine mods - Headers Listers Headers can play an important part of an engine build and the design of the exhaust system does impact the tune of a car, ?but? the use of the car, grocery getter, daily driver, trailer queen, track or high speed at full throttle dictates what parts you add and the intended benefit those parts may or may not give your build. The headers shown in previous posts will flow better than any stock system. Is it necessary for street cars, probably not. Does it produce 10% more horsepower, maybe. Is that what your after? Maybe the torque curve is more important?.. There is a long list of things to consider when contemplating a change from the stock setup. Aloha Perry 1955 BN2 10.1 to 1 compression on 90 something octane. (Yes Harriet you can run that much compression on the street.) Bench flowed intake and exhaust ports Larger 100-Six valves Reshaped combustion chambers in head 1-3/4 carbs Delta reprofiled cam -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:42:55 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:42:55 -0800 Subject: [Healeys] Engine mods - Headers References: <62DC7E55-F01F-40D4-961B-851D4CD6817F@gmail.com> They do fit.... and without any cutting! On Sun, Mar 5, 2017 at 9:16 PM, Chris Dimmock wrote: > You won't be fitting those into a standard Healey engine bay! > Are they special ones to keep your (LHD) feet warm? > :-) > > Sent from my iPhone > > > On 4 Mar. 2017, at 11:47 am, richard mayor > wrote: > > > > You need a good set of headers and I have one for sale. > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/austin.healey at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:47:16 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:47:16 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <950b2141-66be-f74d-48ad-c50d2d65386f@comcast.net> <00e101d29639$d6cfa380$846eea80$@tpg.com.au> The 2 two 1 "wye" is a slip fit. And, that is exactly what I use on my race car. One could use the wye, or not. On Sun, Mar 5, 2017 at 9:23 PM, Patrick & Caroline Quinn < p_cquinn at tpg.com.au> wrote: > Hello > > > > The very early 100/6 BN4s had a two into one muffler and a single tail > pipe. > > > > Hoo Roo > > > > Patrick Quinn > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *Bob > Spidell > *Sent:* Monday, 6 March 2017 11:14 AM > *To:* healeys at autox.team.net > *Subject:* Re: [Healeys] Engine mods - Headers > > > > Single exhaust on a 6-cyl Healey? > > > > On 3/5/2017 7:34 AM, Bruce Steele wrote: > > Very nicely fabricated! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > > > You need a good set of headers and I have one for sale. > [image: Inline image 1] > > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 31302 bytes Desc: not available URL: From boyracer466 at gmail.com Mon Mar 6 17:50:50 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:50:50 -0800 Subject: [Healeys] Engine mods - Headers References: <2a2489a9-5654-76c5-4a06-7e54f4870d10@summaventures.com> Not only do they fit without cutting, they are 1-3/4" tubes, which means they are 1-5/8" ID ----- exactly the same size as the exhaust ports. On Mon, Mar 6, 2017 at 3:39 AM, Chris Dimmock wrote: > I was being sarcastic about the foot warmers. > Seriously Men. > 101 exhaust systems theory. > You all passed. > Now - all you need to do is fit your perfect, identical length pipes > inside your body/ chassis structure. > Equal lengths, 3 into 2, 2 into 1. Yep > Awesome theory. Right out of a Text book. > Humor me. This isn't my design. > So flush your books, and look again. > Focus on the pipe length from the block to the horizontal pipe. > Holy shit!! > That side pipe is so far away from my engine block..... > Then punch yourself in the face. > My guess? Extractors to fit like the 1967 RAC car. > > > > > > Sent from my iPhone > > > On 6 Mar. 2017, at 8:37 pm, Peter Dzwig > wrote: > > > > I wonder what the gas flow dynamics are like with a structure like that. > I > > wouldn't have thought that the flow was very free from a cursory glance. > It's > > those choking bends and the long flat(?) runs that worry me. > > > > Patrick is as ever right about these things, 100/6s did use a single > exhaust as > > did works rally cars. > > > > Peter > > > > -- > > > > =========================================================== > > Dr Peter Dzwig > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/austin.healey at gmail.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 17:58:08 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 16:58:08 -0800 Subject: [Healeys] Headers They fit! Here's what my headers look like in my engine bay. They are the same as the other set only mine are ceramic coated. -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Mon Mar 6 18:00:56 2017 From: boyracer466 at gmail.com (richard mayor) Date: Mon, 6 Mar 2017 17:00:56 -0800 Subject: [Healeys] Headers [image: Inline image 1] -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Headers - My headers 001.jpg Type: image/jpeg Size: 400520 bytes Desc: not available URL: From fredwescoe at gmail.com Mon Mar 6 18:08:28 2017 From: fredwescoe at gmail.com (Fred Wescoe) Date: Mon, 6 Mar 2017 20:08:28 -0500 Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Mon Mar 6 22:14:43 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Mon, 6 Mar 2017 21:14:43 -0800 Subject: [Healeys] Headers References: That?s pretty impressive! John Spaur ?62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of richard mayor Sent: Monday, March 6, 2017 5:01 PM To: healeys Subject: [Healeys] Headers -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 33458 bytes Desc: not available URL: From jmsdarch at sbcglobal.net Mon Mar 6 22:24:50 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Mon, 6 Mar 2017 21:24:50 -0800 Subject: [Healeys] Overdrive References: Fred, I don?t fully understand the issue. My experience with OD?s is that the lever could be misadjusted if it lines up with the hole. Counter intuitive I know, but parts wear. That said, when driving, to disengage the OD once the switch has been turned off one needs to quickly punch the gas pedal. That causes it to disengage. John 6?2 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: Monday, March 6, 2017 5:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From pollpete at ix.netcom.com Mon Mar 6 23:59:57 2017 From: pollpete at ix.netcom.com (P.M. Pollock) Date: Mon, 6 Mar 2017 22:59:57 -0800 Subject: [Healeys] OT: '71 Midget Mk III Listers, I'd appreciate any comments about the '71 Midget Mk III my son is proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- implies I'm knowledgeable about the other LBCs. https://redding.craigslist.org/cto/5984510714.html Anything about the cars in general or this one in particular would be most appreciated. Cheers, Pete Pollock BJ7 N. California From coudesluijs at chello.nl Tue Mar 7 02:19:33 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Tue, 7 Mar 2017 10:19:33 +0100 Subject: [Healeys] OT: '71 Midget Mk III References: <7e0a31a7-c5b6-dac8-b1aa-d3e540b17035@ix.netcom.com> They are not the prettiest, but they are of very simple construction and easy to restore and repair and all or most parts are available. The engine may be small but can be replaced by a 1275cc engine which is easily tuned. They are as bumpy as a AH100 but if you do not mind that a joy to drive. A perfect car for learning how to deal with a classic car. Kees Oudesluijs Op 7-3-2017 om 7:59 schreef P.M. Pollock: > Listers, > > I'd appreciate any comments about the '71 Midget Mk III my son is > proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- > implies I'm knowledgeable about the other LBCs. > https://redding.craigslist.org/cto/5984510714.html > Anything about the cars in general or this one in particular would be > most appreciated. > > Cheers, > > Pete Pollock > BJ7 > N. California > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From austin.healey at gmail.com Tue Mar 7 04:27:37 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Tue, 7 Mar 2017 22:27:37 +1100 Subject: [Healeys] Headers References: I stand corrected Richard. That's an awesome job with no body mods. Best Chris Sent from my iPhone > On 7 Mar. 2017, at 12:00 pm, richard mayor wrote: > > > ______ From glemon at neb.rr.com Tue Mar 7 06:52:10 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Tue, 7 Mar 2017 13:52:10 +0000 Subject: [Healeys] OT: '71 Midget Mk III It looks and sounds like a nice car at a decent price. As with any old car check for rust or bad rust repairs, rocker panels, floors, bottom of the little area between the front fender and the door. Most parts are cheap and readily available new and used. Check that the front suspension is tight, it can be relatively expensive to fix. Tranny, same thing, non synchro first often gets banged up and chipped, it should whine a little, not a lot. The asking price used to be all the money in the world for a Midget, but they have gone up like everything else. They are a hoot to drive, like a little go kart. I don't know the situation, I don't know if I would want one for my young kids first and only car (let them learn their lessons in a Carolla or something) but as a weekend or fun car they are great. Greg Lemon (first car, 66 Sprite, several others after) > Op 7-3-2017 om 7:59 schreef P.M. Pollock: > > Listers, > > > > I'd appreciate any comments about the '71 Midget Mk III my son is > > proposing to buy. He assumes my BJ7 -sadly inactive for 25 years- > > implies I'm knowledgeable about the other LBCs. > > https://redding.craigslist.org/cto/5984510714.html > > Anything about the cars in general or this one in particular would be > > most appreciated. > > > > Cheers, > > > > Pete Pollock > > BJ7 > > N. California > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/glemon at neb.rr.com > From jdavidso at shaw.ca Tue Mar 7 08:52:21 2017 From: jdavidso at shaw.ca (John Davidson) Date: Tue, 7 Mar 2017 09:52:21 -0600 Subject: [Healeys] Overdrive References: Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Tue Mar 7 09:22:05 2017 From: roggrace at telus.net (Roger Grace) Date: Tue, 7 Mar 2017 08:22:05 -0800 Subject: [Healeys] Overdrive References: lHfwcJerOsVy3lHfxccoeh The operating through shaft is supposed to have about 10 thou end float to stop binding at either end. Perhaps try increasing this a touch as this might be causing it to hang up ? rg From: John Davidson Sent: Tuesday, March 7, 2017 7:52 AM To: 'Fred Wescoe' ; 'healeys' Subject: Re: [Healeys] Overdrive Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------------------------------------------------------------------------- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7998 / Virus Database: 4756/14073 - Release Date: 03/07/17 -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Tue Mar 7 09:35:23 2017 From: roggrace at telus.net (Roger Grace) Date: Tue, 7 Mar 2017 08:35:23 -0800 Subject: [Healeys] Rear Main Drain Pipe I currently have the oil pan off my BJ8 ? to replace the gasket with one of those newer silicon style ones. While scratching around saw that there was a large threaded hole on the rear main. Also one on the front main but smaller diameter. My manual shows a drain pipe there. Is it important ? Do I need to fit one ? Purpose ? Read on another forum that removing it reduces leaks from the rear seal ? What about the front threaded hole ? Manual doesn?t show anything ? Thoughts please. rg -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Tue Mar 7 09:31:18 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Tue, 7 Mar 2017 08:31:18 -0800 Subject: [Healeys] Overdrive References: <007701d2975a$cffdc010$6ff94030$@shaw.ca> Remove the operating rod and check that the very small bleed hole under the check valve isnt plugged. David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com From: John Davidson Sent: Tuesday, March 07, 2017 7:52 AM To: 'Fred Wescoe' ; 'healeys' Subject: Re: [Healeys] Overdrive Fred, it seems that you have tried everything and I can understand your frustrations. Without seeing the solenoid/lever connection, I would suggest that the lever may be too tight to the solenoid core and the lever then jams and cannot return due to the interference. The core has to move freely on the lever as it moves up and down. Unfortunately, the lever attachment point will not remain flat as it pivots at the OD. With the upper and lower ?washer? type widening this area can interfere with the lever if connected too tightly and thus jam ever so slightly. Otherwise, there is something that is causing the solenoid core from dropping. Is the core bent or otherwise interfering with the internal solenoid body? Is your rubber boot adding additional pressure and holding the core in the body? When you loosen the solenoid body, does this ?realignment? allow the core to drop? Is the core straight? Try rolling it on a flat surface and see how it is. Is the core clean without oil or grease buildup? My 2 cents worth Fred hope this helps. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Fred Wescoe Sent: March-06-17 7:08 PM To: healeys Subject: [Healeys] Overdrive Listers, In a previous post, I related problems with my 66 BJ8 overdrive not working/releasing properly. The electrical issues have now been solved and the electrics are working correctly. The remaining issue is still the release of the overdrive. The operating lever is properly adjusted now with the hole in the lever lining up with the hole in the case. The operating solenoid/lever engages strongly every time and the two holes on the right side always line up. However, when the switch is turned off, the gear selector moved to neutral and the gas pedal pressed, the solenoid is deactivated (as indicated by a volt meter) but the lever does not release. I have removed and cleaned the operating valve pushrod and reinstalled it. With the plug removed I can see the spring jump when the overdrive is switched on. At first I thought that the solenoid lever was rubbing against the trans case and not allowing the solenoid lever to release. But that is not what is happening (I checked both sides of the trans). When I apply the slightest pressure to the solenoid lever (at the solenoid), the lever drops down into the off position. Time after time this is happens. The valve operating shaft gives a very slight resistance to moving initially and does not want to release by it's self. After the very slightest pressure on the lever, the lever moves easily and drops to the released position. No matter what I do I cannot get the solenoid lever to drop down on it's own. With just the slightest touch it does drop down. I loosened the solenoid unit so that it was sort of free floating but no change at all no matter what I did or how I moved it. I removed and cleaned the solenoid and plunger. Is it possible that something inside the trans is binding the actuating shaft/lever? I am really frustrated with getting the overdrive to work properly. Any thoughts would be greatly appreciated. Thanks, Fred 66 BJ8 63 BJ7 deceased -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From Ed at wadsworthoneal.com Tue Mar 7 10:41:01 2017 From: Ed at wadsworthoneal.com (Ed O'Neal) Date: Tue, 7 Mar 2017 17:41:01 +0000 Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. From pollpete at ix.netcom.com Tue Mar 7 10:44:30 2017 From: pollpete at ix.netcom.com (P.M. Pollock) Date: Tue, 7 Mar 2017 09:44:30 -0800 Subject: [Healeys] OT: '71 Midget Mk III References: <7e0a31a7-c5b6-dac8-b1aa-d3e540b17035@ix.netcom.com> Thanks folks, I knew the List would come through for us. One aspect I neglected to mention is that our son is long out of the nest and just reaching that station in life where he can think about undertaking the care and feeding of a LBC for fun. (For me it was the reverse: after 15 years companionship with the BJ7 I married a Karmann-Ghia as my second.) Cheers, Pete Pollock BJ7 N. California On 3/6/2017 10:59 PM, P.M. Pollock wrote: > Listers, > > I'd appreciate any comments about the '71 Midget Mk III my son is proposing to > buy. He assumes my BJ7 -sadly inactive for 25 years- implies I'm > knowledgeable about the other LBCs. > https://redding.craigslist.org/cto/5984510714.html > Anything about the cars in general or this one in particular would be most > appreciated. > > Cheers, > > Pete Pollock > BJ7 > N. California > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/pollpete at ix.netcom.com > > -- IMPORTANT - PLEASE NOTE: This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 USC 2510. Its disclosure is strictly limited to the recipient intended by the sender of this message. This communication may contain confidential and privileged material for the sole use of the intended recipient and receipt by anyone other than the intended recipient does not constitute a loss of the confidential or privileged nature of the communication. Any review or distribution by others is strictly prohibited. If you are not the intended recipient please contact the sender by return electronic mail and delete all copies of this communication. From 050.rpl at gmail.com Tue Mar 7 12:25:59 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Tue, 7 Mar 2017 14:25:59 -0500 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Price Lindsay 239-596-8518 (Home) 630-841-6300 (Cell) 050.rpl at gmail.com > On Mar 7, 2017, at 12:41 PM, Ed O'Neal wrote: > > I would like to have some recommendations for a competent distributor rebuilder. > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpaynepbr at cox.net Tue Mar 7 12:34:40 2017 From: jpaynepbr at cox.net (Jonas Payne) Date: Tue, 7 Mar 2017 11:34:40 -0800 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Jeff at Advanced Distributor. They've done a dozen for me and I have been very pleased with the price, lead time and quality of work. Jonas Payne PBR Consulting Services, LLC 702.882.6711 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Ed O'Neal Sent: Tuesday, March 7, 2017 9:41 AM To: healeys at autox.team.net Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/jpaynepbr at cox.net From goldengt at cal.net Tue Mar 7 13:41:15 2017 From: goldengt at cal.net (goldengt) Date: Tue, 07 Mar 2017 12:41:15 -0800 Subject: [Healeys] Repro bj8 window crank and door handle The window crank pivot pin head sticks out too far and tears the door panel. Way different design from the original .The interior door handle mountin pin holes a not as original making the tip of the handle cut the door panel.I can grind the crank pin back but don't have a good solution for the handle.?Ken Freese?65 bj8 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeymanjim at hansencc.net Tue Mar 7 14:05:29 2017 From: healeymanjim at hansencc.net (=?utf-8?Q?healeymanjim?=) Date: Tue, 07 Mar 2017 13:05:29 -0800 Subject: [Healeys] =?utf-8?q?o/d_question?= would a weak relay be the cause of a bj8 overdrive being slow to disengage. it takes 10 to 15 seconds to disengage after switch is turned off. suspected throttle switch but wired around it and it still has same symtoms. TIA From vintage_roadster_restoration at hotmail.com Tue Mar 7 14:51:25 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 7 Mar 2017 21:51:25 +0000 Subject: [Healeys] distributor rebuild References: <5DF89A96AFE9744A854AC9AD65E693CC707076A0@mbx027-w1-ca-4.exch027.domain.local> Ed, The only place I would consider sending a distributor to is Jeff at Advance Distributors in Minnesota. Jean ________________________________ From: Healeys on behalf of Ed O'Neal Sent: March 7, 2017 5:41 PM To: healeys at autox.team.net Subject: [Healeys] distributor rebuild I would like to have some recommendations for a competent distributor rebuilder. _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From boyracer466 at gmail.com Tue Mar 7 15:33:30 2017 From: boyracer466 at gmail.com (richard mayor) Date: Tue, 7 Mar 2017 14:33:30 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <81beb416-eeaf-6686-7ef3-49a75aa09fd5@chello.nl> Kees, Given the constraints of the Healey engine bay and footwell, I do not think it is possible to achieve exact equal length pipes, then 6 pipes into 3, and so forth as you describe. If it could have been done.... I would have done it. As the pipes are done now, it is like threading a needle to get both sets into the small opening between engine and chassis. The tubes are 1-3/4" so the inside diameter is 1-5/8" which is the same size as the exhaust ports. If anyone has made a set of headers better than these, I would love to see them. And yes the 2 into 1 wye is not every elegant but that is not part of the headers. It was an afterthought and can be discarded. Richard [image: Inline image 1] On Mon, Mar 6, 2017 at 12:01 AM, Oudesluys wrote: > > It is beautifully made but it is a pity the pipes are not equally length > and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 > joint is not correct. The joining pipe of a smaller diameter than the other. > > Kees Oudesluijs > > > > Very nicely fabricated! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *richard mayor > *Sent:* Friday, March 03, 2017 4:47 PM > *To:* healeys > *Subject:* [Healeys] Engine mods - Headers > > > > You need a good set of headers and I have one for sale. > [image: Inline image 1] > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/boyracer466 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3844.jpg Type: image/jpeg Size: 2021946 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From eyera3000 at gmail.com Tue Mar 7 21:08:57 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 7 Mar 2017 20:08:57 -0800 Subject: [Healeys] Engine mods - Headers References: <022501d295c5$f0e87db0$d2b97910$@roadrunner.com> <81beb416-eeaf-6686-7ef3-49a75aa09fd5@chello.nl> how much do you want for the header Richard? Easier to sell with a price Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 7, 2017 at 2:33 PM, richard mayor wrote: > Kees, > > Given the constraints of the Healey engine bay and footwell, I do not > think it is possible to achieve exact equal length pipes, then 6 pipes into > 3, and so forth as you describe. If it could have been done.... I would > have done it. As the pipes are done now, it is like threading a needle to > get both sets into the small opening between engine and chassis. The tubes > are 1-3/4" so the inside diameter is 1-5/8" which is the same size as the > exhaust ports. If anyone has made a set of headers better than these, I > would love to see them. And yes the 2 into 1 wye is not every elegant but > that is not part of the headers. It was an afterthought and can be > discarded. > > Richard > > [image: Inline image 1] > > On Mon, Mar 6, 2017 at 12:01 AM, Oudesluys wrote: > >> >> It is beautifully made but it is a pity the pipes are not equally length >> and not joined in pairs 6 into 3 and then into 1. Also the last 2 into 1 >> joint is not correct. The joining pipe of a smaller diameter than the other. >> >> Kees Oudesluijs >> >> >> >> Very nicely fabricated! >> >> >> >> Bruce Steele >> >> Brea, CA >> >> 1960 BN7 >> >> >> >> *From:* Healeys [mailto:healeys-bounces at autox.team.net >> ] *On Behalf Of *richard mayor >> *Sent:* Friday, March 03, 2017 4:47 PM >> *To:* healeys >> *Subject:* [Healeys] Engine mods - Headers >> >> >> >> You need a good set of headers and I have one for sale. >> [image: Inline image 1] >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/boyracer466 at gmail.com >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3844.jpg Type: image/jpeg Size: 2021946 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 31302 bytes Desc: not available URL: From sentenac.rw at gmail.com Tue Mar 7 22:21:09 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Tue, 07 Mar 2017 21:21:09 -0800 Subject: [Healeys] Heat Shields References: <01bf01d295c5$2d734270$8859c750$@roadrunner.com> <15aab61e212-16ba-12753@webstg-a10.mail.aol.com> BCS is my go to supplier for hard to find parts and parts where quality is an issue. In this case, Moss worked hard to come up with a kit that Roger Moment would approve. The only place that BCS can get that kit is from Moss. Moss is closer to me than is BCS and can deliver in 24 - 36 hours while BCS takes a couple of days more. -Roland On Tue, 7 Mar 2017 19:46:43 -0500, you wrote: >I would agree to buying as apposed to making - although I have made them from asbestos panels (very controlled). I would also suggest you get the panel through British Car Specialists - more reliable. Gerry --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From austin.healey at gmail.com Wed Mar 8 05:01:06 2017 From: austin.healey at gmail.com (Chris Dimmock) Date: Wed, 8 Mar 2017 23:01:06 +1100 Subject: [Healeys] Repro bj8 window crank and door handle References: Hi Ken, Find some originals on eBay. BJ8 interior door hardware isn't unique to BJ8. Best Chris Sent from my iPhone > On 8 Mar. 2017, at 7:41 am, goldengt wrote: > > The window crank pivot pin head sticks out too far and tears the door panel. Way different design from the original . > The interior door handle mountin pin holes a not as original making the tip of the handle cut the door panel. > I can grind the crank pin back but don't have a good solution for the handle. > Ken Freese > 65 bj8 > > > > Sent from my Verizon, Samsung Galaxy smartphone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From roggrace at telus.net Wed Mar 8 09:16:55 2017 From: roggrace at telus.net (Roger Grace) Date: Wed, 8 Mar 2017 08:16:55 -0800 Subject: [Healeys] Trans oil foaming References: hMFGcDhdwDG7qhMFIcAAjy Now heard back from Castrol/BP. Their response is that they do not recommend the use of their non-detergent 30 oil in manual transmissions. Castrol does not recommend our Non-Detergent 30 oil for manual transmission applications, and we believe the foaming was likely caused by some type of contamination, perhaps water in the transmission. Unfortunately Castrol does not offer a manual transmission fluid product in Canada or the US. This phenomenon is still a mystery to me as there certainly was no water in the transmission as had drained it 2x before noticing the foaming. rg From: Olin Brimberry Sent: Friday, February 24, 2017 12:13 PM To: Roger Grace Cc: Healey List Subject: Re: [Healeys] Trans oil foaming Roger, Your post is good timing for me. I just recently replaced my gearbox and installed Shell ND 30wt. After having a reoccurring drip, I thought it would be wise to check the oil this past weekend. I forgot to check the level before I cranked the engine, so I shut it down after it had run for about a minute. Much to my surprise, I noticed a lot of oil foaming on the dipstick. The oil level was just fine, midway between high and low. Always heard oil foaming was a problem to maintaining proper lubrication of the parts. In engines, I understand that foaming can be caused by over filling the crankcase. Hopefully, the level is high enough that the foam is above the rotating gears and bearings. So, I too would be curious what the experts say. I too have the MT90 at hand, but was concerned that the drip would possibly be worse if I switched. Olin K. Brimberry, PE HunterBane Engineering, PLLC 919-803-4274 (office) 919-522-1608 (mobile) On Feb 24, 2017, at 11:18 AM, Roger Grace wrote: I recently had the OD on my BJ8 apart to replace some parts ? bearing/accumulator/gaskets/O rings etc. For a first sort of sacrificial oil fill I decided to use a non detergent Castrol 30 wt oil. Date codes less than 18 months old. Plan was to switch to the expensive Redline MT90 after testing and after a few hundred miles. This 30 WT oil is often recommended by OD experts. I have built an electric variable speed rest rid to be able to test the transmission outside the car. Overdrive worked fine and transmission sounded OK and ran it for about 2 hours to get the temp up (52C on OD case) and hunt for leaks. So far so good. Then after a few days of standing, and 2 minutes of running, I drained the oil (to fix a leak) and was amazed to see that the oil had foamed badly and there were big classic fish eye bubbles on the surface of the oil. Ambient was about 14C. I did note that the oil coming out of the transmission was somewhat foamier than that from the overdrive drain plug. See enclosed pix. After standing overnight the oil looked normal again. What disturbs me is that unless I had drained the oil I would not have been aware of the foaming and put it into service .... Have now replaced with the MT90 that shows no sign of foaming on the dip stick. Wonder if others have any ideas about this weird phenomenon and is it a concern ? rg <20170128_122945.jpg> <20170127_210053.jpg> <20170127_210045.jpg> No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7998 / Virus Database: 4756/14013 - Release Date: 02/24/17 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 9 09:31:03 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 9 Mar 2017 08:31:03 -0800 Subject: [Healeys] Throttle Bushes Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob From eyera3000 at gmail.com Thu Mar 9 10:49:50 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 9 Mar 2017 09:49:50 -0800 Subject: [Healeys] Throttle Bushes References: Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell wrote: > Cross-posting from BCF: > > While getting ready to drop the rebuilt engine into my BJ8, I noticed the > 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible > to get to with the engine installed--was bent. 'Crap,' I thought, 'one more > job to do before I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the List?--because as I > inspected the shaft, I noticed that one of the two brackets was also bent, > and further inspection revealed that the bush on the driver's side was way > sloppy (actually, pretty much gone). A quick check of the Moss catalog > showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered > I'd bought a replacement set--supposedly made of teflon, but they say > 'nylon' on the bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called > BCS to see what they had, and John, their parts guy said they'd work on > BJ8s. So, I did some digging and, although the photo of the instructions > and applications on Moss' web page showed 'though BN7 and BT7,' if you > download the instructions--5 pages!--they've been revised to show they work > on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl cars I > recommend you check these brackets and bushings. They are bronze bonded to > rubber and, although my car has nearly 200K miles, I suspect the life of > these is determined as much/more in years as in miles, as the rubber gets > baked by engine heat. The rubber on my driver's side bush was completely > dry, caked and brittle, and could conceivably have resulted in a stuck > throttle. The instructions are intimidating--5 pages!--but, except for > having to work under the dash, which I hate, the job was pretty > straightforward. I managed to get the shaft reasonably straight, and the > used bracket I got from BCS was in good shape (though, in hindsight, I > probably could have straightened my bent one), so now my Rube > Goldberg-designed throttle works smooth and with no slop. > > Thought I'd pass this along since I hadn't seen this issue discussed > before. I'd long since replaced the rubber/bronze bush on the shaft on the > engine, and should never have to worry about these again. Credit to to Eric > Gruden who designed these bushes, and to Moss for going the extra mile to > provide these, for a reasonable cost (about $13). > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Thu Mar 9 12:50:57 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Thu, 9 Mar 2017 14:50:57 -0500 Subject: [Healeys] Firewall Heat Shield Install Would someone please tell me how to install the heat shield on the firewall with the engine in place? It came out in 4 pieces. Do I come in from the drivers side (lhd), from under the car or??? TIA! Price Lindsay 67 BJ8 Sent from my iPhone From goldengt at cal.net Thu Mar 9 17:27:34 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Thu, 9 Mar 2017 16:27:34 -0800 (PST) Subject: [Healeys] another BJ8 door striker question On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Thu Mar 9 19:37:11 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Thu, 9 Mar 2017 18:37:11 -0800 Subject: [Healeys] Throttle Bushes References: I was going to replace the bushes on my throttle shaft, but saw what Eric had done back in, well, who knows when, and they looked great. So I just stripped and painted the shaft. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 09, 2017 9:50 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Throttle Bushes Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 0219171427b.jpg Type: image/jpeg Size: 81274 bytes Desc: not available URL: From phoenix722 at comcast.net Thu Mar 9 20:44:34 2017 From: phoenix722 at comcast.net (Mike S) Date: Thu, 9 Mar 2017 19:44:34 -0800 Subject: [Healeys] codes Everything is on the web, right? Why can't I find it? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other? Thanks. Mike BJ8 From bspidell at comcast.net Thu Mar 9 21:43:26 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 9 Mar 2017 20:43:26 -0800 Subject: [Healeys] Pump 'Cover' OK gurus, what's the purpose of this, and which cars (#72)? http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 I bought one, hoping it'll muffle the sound and vibration of the pump bolted to the rear bulkhead of my BN2; is this it's purpose in life? TIA, Bob From coudesluijs at chello.nl Fri Mar 10 01:40:27 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 09:40:27 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> That is correct, although it will not help much. The sleeve is the most important item for that purpose and can be made up from scrap materials easily enough, which also allows some experimenting. Kees Oudesluijs Op 10-3-2017 om 5:43 schreef Bob Spidell: > OK gurus, what's the purpose of this, and which cars (#72)? > > http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 > > > I bought one, hoping it'll muffle the sound and vibration of the pump > bolted to the rear bulkhead of my BN2; is this it's purpose in life? > > TIA, > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From per at schoerner.se Fri Mar 10 01:40:32 2017 From: per at schoerner.se (Per Schoerner) Date: Fri, 10 Mar 2017 09:40:32 +0100 Subject: [Healeys] Firewall Heat Shield Install References: <0EAE2C2B-A6C1-44F5-81BD-F3D0FE42C3C7@gmail.com> I did that once, had to split it in the middle IIRC. Per Skickat fr?n min iPhone > 9 mars 2017 kl. 20:50 skrev R. Lindsay <050.rpl at gmail.com>: > > Would someone please tell me how to install the heat shield on the firewall with the engine in place? It came out in 4 pieces. > > Do I come in from the drivers side (lhd), from under the car or??? > > TIA! > > Price Lindsay > 67 BJ8 > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at schoerner.se > From coudesluijs at chello.nl Fri Mar 10 03:09:03 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 11:09:03 +0100 Subject: [Healeys] codes References: See: https://en.wikipedia.org/wiki/Austin-Healey_100#Model_designators They do not refer to any other UK cars. Each make has its own specific codes, like in these modern days, but simpler. Kees Oudesluijs Op 10-3-2017 om 4:44 schreef Mike S: > Everything is on the web, right? Why can't I find it? Anyway, can > someone point me to a website that lists all the British auto codes, > e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they > relate to engine size and body style, but can't find the details. Are > they an Austin system, BMC system, other? Thanks. > > Mike > BJ8 > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From coudesluijs at chello.nl Fri Mar 10 03:10:22 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 11:10:22 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> It also helps to mount the bracket on rubber isolator blocks. Kees Oudesluijs Op 10-3-2017 om 9:40 schreef Oudesluys: > That is correct, although it will not help much. The sleeve is the > most important item for that purpose and can be made up from scrap > materials easily enough, which also allows some experimenting. > Kees Oudesluijs > > > Op 10-3-2017 om 5:43 schreef Bob Spidell: >> OK gurus, what's the purpose of this, and which cars (#72)? >> >> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >> >> >> I bought one, hoping it'll muffle the sound and vibration of the pump >> bolted to the rear bulkhead of my BN2; is this it's purpose in life? >> >> TIA, >> >> Bob >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From bspidell at comcast.net Fri Mar 10 07:58:31 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 06:58:31 -0800 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> What is the 'sleeve?' On 3/10/2017 12:40 AM, Oudesluys wrote: > That is correct, although it will not help much. The sleeve is the > most important item for that purpose and can be made up from scrap > materials easily enough, which also allows some experimenting. > Kees Oudesluijs > > > Op 10-3-2017 om 5:43 schreef Bob Spidell: >> OK gurus, what's the purpose of this, and which cars (#72)? >> >> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >> >> >> I bought one, hoping it'll muffle the sound and vibration of the pump >> bolted to the rear bulkhead of my BN2; is this it's purpose in life? >> >> TIA, >> >> Bob >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > From bspidell at comcast.net Fri Mar 10 08:18:30 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 07:18:30 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> ... and another on the gas pedal shaft--4 total--although that one doesn't suffer as much abuse (that was the 'under the dash' part). Can't speak to your car, Bruce; the instructions show these are suitable for BN7s. Maybe prior to BJ8s they used something different (can't imagine cork would hold up long at all). Mine were rubber/bronze bushings in a metal cup; the nylon/teflon ones still go inside the metal cup. Looking at Bruce's photo, you can see the ends of the cup protruding from either side of the brackets, although I don't see any of the white nylon bushes. Every time I think I've done every possible job on a Healey it proves me wrong. Bob ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a little football in my head. On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: > I don't follow this. Mine were cork in a metal cup not rubber/bronze. > If the engine is out these need to be replaced, two on the cross shaft > and one where the pedal shaft enters the engine bay. > Nice photo.... looks just like my car > > > ------------------------------------------------------------------------ > *From: *"Bruce Steele" > *To: *"i erbs" , "Bob Spidell" > *Cc: *"Healeys" > *Sent: *Thursday, March 9, 2017 8:37:11 PM > *Subject: *Re: [Healeys] Throttle Bushes > > I was going to replace the bushes on my throttle shaft, but saw what > Eric had done back in, well, who knows when, and they looked great. > So I just stripped and painted the shaft. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *i erbs > *Sent:* Thursday, March 09, 2017 9:50 AM > *To:* Bob Spidell > *Cc:* Healeys > *Subject:* Re: [Healeys] Throttle Bushes > > Good catch. They tend to get munged when folks install or remove their > engines, if not as stated heat and time. > > I built a cable throttle set up to bypass the Rube Goldberg set up. I > have promised a wrote up to John Sims for quite some time to add to > his wonderful site. I have been slowly working on it and will soon I > hope get it to him. > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell > Cross-posting from BCF: > > > While getting ready to drop the rebuilt engine into my BJ8, I > noticed the 'throttle relay shaft'--yeah, the one under the > scuttle, all but impossible to get to with the engine > installed--was bent. 'Crap,' I thought, 'one more job to do before > I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the > List?--because as I inspected the shaft, I noticed that one of the > two brackets was also bent, and further inspection revealed that > the bush on the driver's side was way sloppy (actually, pretty > much gone). A quick check of the Moss catalog showed 'N/A' for all > the parts--I'm screwed, I thought. Then, I remembered I'd bought a > replacement set--supposedly made of teflon, but they say 'nylon' > on the bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). > I called BCS to see what they had, and John, their parts guy said > they'd work on BJ8s. So, I did some digging and, although the > photo of the instructions and applications on Moss' web page > showed 'though BN7 and BT7,' if you download the instructions--5 > pages!--they've been revised to show they work on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl > cars I recommend you check these brackets and bushings. They are > bronze bonded to rubber and, although my car has nearly 200K > miles, I suspect the life of these is determined as much/more in > years as in miles, as the rubber gets baked by engine heat. The > rubber on my driver's side bush was completely dry, caked and > brittle, and could conceivably have resulted in a stuck throttle. > The instructions are intimidating--5 pages!--but, except for > having to work under the dash, which I hate, the job was pretty > straightforward. I managed to get the shaft reasonably straight, > and the used bracket I got from BCS was in good shape (though, in > hindsight, I probably could have straightened my bent one), so now > my Rube Goldberg-designed throttle works smooth and with no slop. > > Thought I'd pass this along since I hadn't seen this issue > discussed before. I'd long since replaced the rubber/bronze bush > on the shaft on the engine, and should never have to worry about > these again. Credit to to Eric Gruden who designed these bushes, > and to Moss for going the extra mile to provide these, for a > reasonable cost (about $13). > > Bob > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From coudesluijs at chello.nl Fri Mar 10 08:43:28 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Fri, 10 Mar 2017 16:43:28 +0100 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> It is actually the cover nr. 72, the earlier shape instead of the later rubber strip that sits between the clamp and the pump body. It is to isolate the pump from the car body to reduce noise. I imagine they replaced the cover to avoid overheating of the pump. The sleeve nr. 70 is a thin rubber ring that is a seal between the pumps coil housing and the Bakelite cover for the points mechanism. I cut the rings from fat bicycle inner tires. When I first looked at the picture (to) quickly I assumed it was the later rubber strip nr.70 as I did not read the explanatory text below the picture. Kees Oudesluijs Op 10-3-2017 om 15:58 schreef Bob Spidell: > What is the 'sleeve?' > > > > On 3/10/2017 12:40 AM, Oudesluys wrote: >> That is correct, although it will not help much. The sleeve is the >> most important item for that purpose and can be made up from scrap >> materials easily enough, which also allows some experimenting. >> Kees Oudesluijs >> >> >> Op 10-3-2017 om 5:43 schreef Bob Spidell: >>> OK gurus, what's the purpose of this, and which cars (#72)? >>> >>> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >>> >>> >>> I bought one, hoping it'll muffle the sound and vibration of the >>> pump bolted to the rear bulkhead of my BN2; is this it's purpose in >>> life? >>> >>> TIA, >>> >>> Bob >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: >>> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >>> >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From healeybruce at roadrunner.com Fri Mar 10 16:56:24 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Fri, 10 Mar 2017 15:56:24 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> That?s because the white nylon bushes got painted cadmium with the rest of the mounts. It clearly looked like Eric had spread the mounts to insert the bushings, then re-crimped them to hold them tightly in place. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Friday, March 10, 2017 7:19 AM Cc: Healeys Subject: Re: [Healeys] Throttle Bushes ... and another on the gas pedal shaft--4 total--although that one doesn't suffer as much abuse (that was the 'under the dash' part). Can't speak to your car, Bruce; the instructions show these are suitable for BN7s. Maybe prior to BJ8s they used something different (can't imagine cork would hold up long at all). Mine were rubber/bronze bushings in a metal cup; the nylon/teflon ones still go inside the metal cup. Looking at Bruce's photo, you can see the ends of the cup protruding from either side of the brackets, although I don't see any of the white nylon bushes. Every time I think I've done every possible job on a Healey it proves me wrong. Bob ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a little football in my head. On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: I don't follow this. Mine were cork in a metal cup not rubber/bronze. If the engine is out these need to be replaced, two on the cross shaft and one where the pedal shaft enters the engine bay. Nice photo.... looks just like my car _____ Sent: Thursday, March 9, 2017 8:37:11 PM Subject: Re: [Healeys] Throttle Bushes I was going to replace the bushes on my throttle shaft, but saw what Eric had done back in, well, who knows when, and they looked great. So I just stripped and painted the shaft. Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 09, 2017 9:50 AM Subject: Re: [Healeys] Throttle Bushes Good catch. They tend to get munged when folks install or remove their engines, if not as stated heat and time. I built a cable throttle set up to bypass the Rube Goldberg set up. I have promised a wrote up to John Sims for quite some time to add to his wonderful site. I have been slowly working on it and will soon I hope get it to him. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Cross-posting from BCF: While getting ready to drop the rebuilt engine into my BJ8, I noticed the 'throttle relay shaft'--yeah, the one under the scuttle, all but impossible to get to with the engine installed--was bent. 'Crap,' I thought, 'one more job to do before I can get the engine in.' It turns out this was serendipitous--first time this word's been used on the List?--because as I inspected the shaft, I noticed that one of the two brackets was also bent, and further inspection revealed that the bush on the driver's side was way sloppy (actually, pretty much gone). A quick check of the Moss catalog showed 'N/A' for all the parts--I'm screwed, I thought. Then, I remembered I'd bought a replacement set--supposedly made of teflon, but they say 'nylon' on the bag--but had given up on installing them because the instructions showed 'through BN7 and BT7' (BJ7/8s need not apply). I called BCS to see what they had, and John, their parts guy said they'd work on BJ8s. So, I did some digging and, although the photo of the instructions and applications on Moss' web page showed 'though BN7 and BT7,' if you download the instructions--5 pages!--they've been revised to show they work on the 'J' cars. Anyway, if anyone has the engine out of one of the later 6-cyl cars I recommend you check these brackets and bushings. They are bronze bonded to rubber and, although my car has nearly 200K miles, I suspect the life of these is determined as much/more in years as in miles, as the rubber gets baked by engine heat. The rubber on my driver's side bush was completely dry, caked and brittle, and could conceivably have resulted in a stuck throttle. The instructions are intimidating--5 pages!--but, except for having to work under the dash, which I hate, the job was pretty straightforward. I managed to get the shaft reasonably straight, and the used bracket I got from BCS was in good shape (though, in hindsight, I probably could have straightened my bent one), so now my Rube Goldberg-designed throttle works smooth and with no slop. Thought I'd pass this along since I hadn't seen this issue discussed before. I'd long since replaced the rubber/bronze bush on the shaft on the engine, and should never have to worry about these again. Credit to to Eric Gruden who designed these bushes, and to Moss for going the extra mile to provide these, for a reasonable cost (about $13). Bob -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Mar 10 17:31:57 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 16:31:57 -0800 Subject: [Healeys] Pump 'Cover' References: <6d4c4a97-92b1-7ea6-503e-0dcd2b50b396@comcast.net> <950ef8ec-f51a-3ccd-5a97-f58b0faf56ad@chello.nl> OK, thanks. Now I can go on to being confused about something else. bs On 3/10/2017 7:43 AM, Oudesluys wrote: > It is actually the cover nr. 72, the earlier shape instead of the > later rubber strip that sits between the clamp and the pump body. It > is to isolate the pump from the car body to reduce noise. I imagine > they replaced the cover to avoid overheating of the pump. > The sleeve nr. 70 is a thin rubber ring that is a seal between the > pumps coil housing and the Bakelite cover for the points mechanism. I > cut the rings from fat bicycle inner tires. When I first looked at the > picture (to) quickly I assumed it was the later rubber strip nr.70 as > I did not read the explanatory text below the picture. > > Kees Oudesluijs > > > Op 10-3-2017 om 15:58 schreef Bob Spidell: >> What is the 'sleeve?' >> >> >> >> On 3/10/2017 12:40 AM, Oudesluys wrote: >>> That is correct, although it will not help much. The sleeve is the >>> most important item for that purpose and can be made up from scrap >>> materials easily enough, which also allows some experimenting. >>> Kees Oudesluijs >>> >>> >>> Op 10-3-2017 om 5:43 schreef Bob Spidell: >>>> OK gurus, what's the purpose of this, and which cars (#72)? >>>> >>>> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28868&SortOrder=430 >>>> >>>> >>>> I bought one, hoping it'll muffle the sound and vibration of the >>>> pump bolted to the rear bulkhead of my BN2; is this it's purpose in >>>> life? >>>> >>>> TIA, >>>> >>>> Bob >>>> >>>> _______________________________________________ >>>> Support Team.Net http://www.team.net/donate.html >>>> Suggested annual donation $12.75 >>>> Archive: http://www.team.net/archive >>>> Forums: http://www.team.net/forums >>>> >>>> Healeys at autox.team.net >>>> http://autox.team.net/mailman/listinfo/healeys >>>> >>>> Unsubscribe/Manage: >>>> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >>>> >>>> >>>> >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: >>> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: >> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > From bspidell at comcast.net Fri Mar 10 17:34:29 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 10 Mar 2017 16:34:29 -0800 Subject: [Healeys] Throttle Bushes References: <348086511.40969593.1489154822717.JavaMail.zimbra@mchsi.com> <018501d299f9$ed701de0$c85059a0$@roadrunner.com> Damn ... now I have to pull my engine out again to paint the bushes. On 3/10/2017 3:56 PM, Bruce Steele wrote: > > That?s because the white nylon bushes got painted cadmium with the > rest of the mounts. It clearly looked like Eric had spread the mounts > to insert the bushings, then re-crimped them to hold them tightly in > place. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *Bob Spidell > *Sent:* Friday, March 10, 2017 7:19 AM > *Cc:* Healeys > *Subject:* Re: [Healeys] Throttle Bushes > > ... and another on the gas pedal shaft--4 total--although that one > doesn't suffer as much abuse (that was the 'under the dash' part). > Can't speak to your car, Bruce; the instructions show these are > suitable for BN7s. Maybe prior to BJ8s they used something different > (can't imagine cork would hold up long at all). Mine were > rubber/bronze bushings in a metal cup; the nylon/teflon ones still go > inside the metal cup. Looking at Bruce's photo, you can see the ends > of the cup protruding from either side of the brackets, although I > don't see any of the white nylon bushes. > > Every time I think I've done every possible job on a Healey it proves > me wrong. > > Bob > > ps. Of course, it's Eric GruNden, not Gruden. Guess I still had a > little football in my head. > > On 3/10/2017 6:07 AM, Tim Davis BN7 wrote: > > I don't follow this. Mine were cork in a metal cup not > rubber/bronze. If the engine is out these need to be replaced, two > on the cross shaft and one where the pedal shaft enters the engine > bay. > > Nice photo.... looks just like my car > > ------------------------------------------------------------------------ > > *From: *"Bruce Steele" > *Cc: *"Healeys" > *Sent: *Thursday, March 9, 2017 8:37:11 PM > *Subject: *Re: [Healeys] Throttle Bushes > > I was going to replace the bushes on my throttle shaft, but saw > what Eric had done back in, well, who knows when, and they looked > great. So I just stripped and painted the shaft. > > Bruce Steele > > Brea, CA > > 1960 BN7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf > Of *i erbs > *Sent:* Thursday, March 09, 2017 9:50 AM > *Subject:* Re: [Healeys] Throttle Bushes > > Good catch. They tend to get munged when folks install or remove > their engines, if not as stated heat and time. > > I built a cable throttle set up to bypass the Rube Goldberg set > up. I have promised a wrote up to John Sims for quite some time to > add to his wonderful site. I have been slowly working on it and > will soon I hope get it to him. > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > On Thu, Mar 9, 2017 at 8:31 AM, Bob Spidell > Cross-posting from BCF: > > While getting ready to drop the rebuilt engine into my BJ8, I > noticed the 'throttle relay shaft'--yeah, the one under the > scuttle, all but impossible to get to with the engine > installed--was bent. 'Crap,' I thought, 'one more job to do > before I can get the engine in.' It turns out this was > serendipitous--first time this word's been used on the > List?--because as I inspected the shaft, I noticed that one of > the two brackets was also bent, and further inspection > revealed that the bush on the driver's side was way sloppy > (actually, pretty much gone). A quick check of the Moss > catalog showed 'N/A' for all the parts--I'm screwed, I > thought. Then, I remembered I'd bought a replacement > set--supposedly made of teflon, but they say 'nylon' on the > bag--but had given up on installing them because the > instructions showed 'through BN7 and BT7' (BJ7/8s need not > apply). I called BCS to see what they had, and John, their > parts guy said they'd work on BJ8s. So, I did some digging > and, although the photo of the instructions and applications > on Moss' web page showed 'though BN7 and BT7,' if you download > the instructions--5 pages!--they've been revised to show they > work on the 'J' cars. > > Anyway, if anyone has the engine out of one of the later 6-cyl > cars I recommend you check these brackets and bushings. They > are bronze bonded to rubber and, although my car has nearly > 200K miles, I suspect the life of these is determined as > much/more in years as in miles, as the rubber gets baked by > engine heat. The rubber on my driver's side bush was > completely dry, caked and brittle, and could conceivably have > resulted in a stuck throttle. The instructions are > intimidating--5 pages!--but, except for having to work under > the dash, which I hate, the job was pretty straightforward. I > managed to get the shaft reasonably straight, and the used > bracket I got from BCS was in good shape (though, in > hindsight, I probably could have straightened my bent one), so > now my Rube Goldberg-designed throttle works smooth and with > no slop. > > Thought I'd pass this along since I hadn't seen this issue > discussed before. I'd long since replaced the rubber/bronze > bush on the shaft on the engine, and should never have to > worry about these again. Credit to to Eric Gruden who designed > these bushes, and to Moss for going the extra mile to provide > these, for a reasonable cost (about $13). > > Bob > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ghaywood at ec.rr.com Fri Mar 10 18:37:33 2017 From: ghaywood at ec.rr.com (George Haywood) Date: Sat, 11 Mar 2017 1:37:33 +0000 Subject: [Healeys] another BJ8 door striker question Ken, The packing plate goes on the shut face side but they go between the aluminum door finisher and the shut face pillar I'm pretty sure. If I remember correctly I used a few choice expletives while getting the proper alignment and fit. Hope this helps, George Haywood '65 bj8 ---- goldengt at cal.net wrote: > On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. From jstmorris at yahoo.com Sat Mar 11 08:33:13 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 11 Mar 2017 15:33:13 +0000 (UTC) Subject: [Healeys] codes References: Hello Mike;? I am not sure what type of codes you are after - model, engine, chassis, etc.? Attached is a file with chassis codes.? This may help a bit. ?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 10, 2017 2:08 AM, Mike S wrote: Everything is on the web, right?? Why can't I find it?? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)?? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other?? Thanks. Mike BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Chassis-Number-Guide by Hannah Sharp.pdf Type: application/pdf Size: 126824 bytes Desc: not available URL: From ahbn6 at verizon.net Sat Mar 11 09:18:15 2017 From: ahbn6 at verizon.net (John Sims) Date: Sat, 11 Mar 2017 11:18:15 -0500 Subject: [Healeys] codes References: <22340972.3390282.1489246393146@mail.yahoo.com> I can?t find the original layout but: B stands for the engine size. A for the small engine in Sprites (less than 2000cc) and B for the engine in Healeys up to 3000 cc?s or so. Thus the AN, etc. for Sprites since they had a 900 or so cc engine. N stands for two seater although it appeared on the BN4 which was a ?occasional? four seater (if you had stubby legs you could fit) T for four seater J for true convertible with the top permanently fastened L is for left hand drive If there is an ?O? it stands for equipped with overdrive but this was omitted on most cars as most had standard OD. So, BN6 was a large engine two seater and the 6th model in the series. BJ8 was a large engine car with a permanent folding top and the 8th model in the series. BJ9 is my Kia Sedona. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of J. Scott Morris Sent: Saturday, March 11, 2017 10:33 AM To: Mike S; Healey List Subject: Re: [Healeys] codes Hello Mike; I am not sure what type of codes you are after - model, engine, chassis, etc. Attached is a file with chassis codes. This may help a bit. --Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 10, 2017 2:08 AM, Mike S wrote: Everything is on the web, right? Why can't I find it? Anyway, can someone point me to a website that lists all the British auto codes, e.g., BN, BN, BJ........, (but not just Austin Healey)? I know they relate to engine size and body style, but can't find the details. Are they an Austin system, BMC system, other? Thanks. Mike BJ8 _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Sat Mar 11 10:26:13 2017 From: phoenix722 at comcast.net (Mike S) Date: Sat, 11 Mar 2017 09:26:13 -0800 Subject: [Healeys] codes References: <22340972.3390282.1489246393146@mail.yahoo.com> Thanks to all. Mike From bjcap at optonline.net Sat Mar 11 13:18:44 2017 From: bjcap at optonline.net (carroll phillips) Date: Sat, 11 Mar 2017 15:18:44 -0500 (EST) Subject: [Healeys] Throttle bushes References: I just remove the old rubber and use a windshield type medium hard when cured caulk (think butyl rubber) and redo the original cups and bushes. Looks exactly as original and does the same job as original Carroll From rjhco at att.net Sat Mar 11 13:42:28 2017 From: rjhco at att.net (Richard J. Hockert) Date: Sat, 11 Mar 2017 14:42:28 -0600 Subject: [Healeys] New Pistons and cam for sale I have a new set of full race JE Pistons that I do not need. They are 84.5mm (3.327 Inches), the maximum allowable to remain under 3 liters. Paid to have them custom made, with new pins (with spiro locks), thin rings, tuff coat on skirt and thermal barrier coating on the crown. Also had the crown undercut. Paid almost $1200 delivered. Will sell at discount and take small loss. Have pictures and invoice for serious inquiry. Also, have a Liege cam with bucket followers that is extra to my use (bucket followers require longer push rods). Will sell for fair offer. Best cam factory ever developed. Grind was used in Liege-Rome-Liege rally 1963, then, so good, used at Sebring 1965. Going to eBay next week - list first choice. Contact off list please. Thanks, Jim From sbyers at ec.rr.com Sat Mar 11 14:43:33 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sat, 11 Mar 2017 16:43:33 -0500 Subject: [Healeys] Throttle bushes References: <5d981c13.58bbd.15abf05fbe3.Webtop.32@optonline.net> I think I used liquid silicone rubber when I repaired my throttle rod assembly in 1999. I inserted the bronze bushings into the cups, filled the cups with the silicone, then inserted the rod to ensure that the bushings would be in alignment when the silicone cured. I have had no reason to remove the repaired assembly since then but the silicone seems to be doing fine so far. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of carroll phillips Sent: Saturday, March 11, 2017 3:19 PM To: healeys at autox.team.net Subject: Re: [Healeys] Throttle bushes I just remove the old rubber and use a windshield type medium hard when cured caulk (think butyl rubber) and redo the original cups and bushes. Looks exactly as original and does the same job as original Carroll _______________________________________________ $12.75 Archive: http://www.team.net/archive --- This email has been checked for viruses by AVG. http://www.avg.com From goldengt at cal.net Sat Mar 11 18:25:54 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Sat, 11 Mar 2017 17:25:54 -0800 (PST) Subject: [Healeys] BJ8 door latch done References: <20170311013733.6N4QK.33112.root@cdptpa-web09> I tried a combination of original latch plate and new striker plate without the packing plate and that worked very nicely so I left well enough alone. The welded original latch turned out well.If I want the new latch plate, I am sure I would need the packing plate also for a start. ----- Original Message ----- From: George Haywood To: goldengt at cal.net Cc: healey list Sent: Fri, 10 Mar 2017 17:37:33 -0800 (PST) Subject: Re: [Healeys] another BJ8 door striker question Ken, The packing plate goes on the shut face side but they go between the aluminum door finisher and the shut face pillar I'm pretty sure. If I remember correctly I used a few choice expletives while getting the proper alignment and fit. Hope this helps, George Haywood '65 bj8 ---- goldengt at cal.net wrote: > On the BJ8 parts list, a packing plate for the door striker is shown but not exactly. Should this packing plate be on the shut face side where it could help move the striker in and out for an adjustment or should the plate be in the fender well next to the threaded plate? Per my old parts I need to start bending the reproduction stuff. Sticking the packing plate against the shut face would help.Thanks,Ken Freese65 BJ8Note to Len- thanks for the picture, but that is not the part that is worn on my car. -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Sat Mar 11 20:50:10 2017 From: healeyrik at gmail.com (HealeyRick) Date: Sat, 11 Mar 2017 22:50:10 -0500 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Sat Mar 11 22:17:12 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sat, 11 Mar 2017 21:17:12 -0800 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Saturday, March 11, 2017 7:50 PM To: healeys at autox.team.net Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville -------------- next part -------------- An HTML attachment was scrubbed... URL: From tomfelts at windstream.net Sun Mar 12 06:01:24 2017 From: tomfelts at windstream.net (Tom Felts) Date: Sun, 12 Mar 2017 8:01:24 -0400 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. tom ---- Bruce Steele wrote: ============= He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Saturday, March 11, 2017 7:50 PM To: healeys at autox.team.net Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ Rick Neville From dayton21 at comcast.net Sun Mar 12 06:57:32 2017 From: dayton21 at comcast.net (dayton21 at comcast.net) Date: Sun, 12 Mar 2017 08:57:32 -0400 Subject: [Healeys] Skip Saunders....? Anyone have a current email for Skip Saunders? tfsbj7 at mindspring.com ;????.is no good Mitchell Sent from Mail for Windows 10 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sun Mar 12 09:51:05 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sun, 12 Mar 2017 16:51:05 +0100 (CET) Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: <020001d29aef$e879bfc0$b96d3f40$@roadrunner.com> <20170312080124.9CC6L.20389.root@pamxwww08-z01> Jerry only sold his last Healey three years ago; maybe the 'Healey regret' hasn't set in yet. Wonder if he'll be one of the people that come up to me at gas stations, hotels and restaurants and says: "I used to have one of those; wish I still had it..." My BFF bought a 'rod a few years ago; all he did with it is take it to car shows and toodle around town. He got bored with it (and his wife wouldn't ride in it). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 12, 2017 at 1:01 PM Tom Felts wrote: > > > Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. > > tom > ---- Bruce Steele wrote: > > ============= > He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick > Sent: Saturday, March 11, 2017 7:50 PM > To: healeys at autox.team.net > Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? > > > > Healey guy goes back to street rodding: http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff-back-street-rodding/ > > > > Rick Neville From healeybruce at roadrunner.com Sun Mar 12 22:16:14 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Sun, 12 Mar 2017 21:16:14 -0700 Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? References: <020001d29aef$e879bfc0$b96d3f40$@roadrunner.com> <20170312080124.9CC6L.20389.root@pamxwww08-z01> <1029887373.1539006.1489333866925@connect.xfinity.com> Well, my wife doesn't ride in the Healey, but I always figured it was her loss. Bruce Steele Brea, CA 1960 BN7 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Sunday, March 12, 2017 8:51 AM To: healeys at autox.team.net Subject: Re: [Healeys] Has Jerry Wall Gone to the Dark Side? Jerry only sold his last Healey three years ago; maybe the 'Healey regret' hasn't set in yet. Wonder if he'll be one of the people that come up to me at gas stations, hotels and restaurants and says: "I used to have one of those; wish I still had it..." My BFF bought a 'rod a few years ago; all he did with it is take it to car shows and toodle around town. He got bored with it (and his wife wouldn't ride in it). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 12, 2017 at 1:01 PM Tom Felts wrote: > > > Interesting. I can relate to the feeling. Although I haven;t done it, I dream of a 55 Ford Sunliner and would trade my 3000 for it----yep. > > tom > ---- Bruce Steele wrote: > > ============= > He has AC, an automatic, comfortable seats and a real roof over his head. If the day comes when I can no longer fold myself into my Healey, then I say whatever makes you happy! In my case, probably a ?69 Hemi Charger 4-speed. Until that comes, I?ll be enjoying my new motor! > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > HealeyRick > Sent: Saturday, March 11, 2017 7:50 PM > To: healeys at autox.team.net > Subject: [Healeys] Has Jerry Wall Gone to the Dark Side? > > > > Healey guy goes back to street rodding: > http://www.hotrod.com/articles/1948-ford-sedan-brought-sports-car-buff > -back-street-rodding/ > > > > Rick Neville _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From goldengt at cal.net Mon Mar 13 16:07:08 2017 From: goldengt at cal.net (goldengt at cal.net) Date: Mon, 13 Mar 2017 15:07:08 -0700 (PDT) Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks.For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut.Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Mon Mar 13 17:04:53 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Mon, 13 Mar 2017 16:04:53 -0700 Subject: [Healeys] VHT primer and paint Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I've read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Mon Mar 13 18:31:07 2017 From: jdavidso at shaw.ca (John Davidson) Date: Mon, 13 Mar 2017 19:31:07 -0500 Subject: [Healeys] drive BN2 without safety gage References: <1113900580.2411000.1489442828548.JavaMail.zimbra@cal.net> While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Mon Mar 13 18:52:43 2017 From: jdavidso at shaw.ca (John Davidson) Date: Mon, 13 Mar 2017 19:52:43 -0500 Subject: [Healeys] drive BN2 without safety gage References: <1113900580.2411000.1489442828548.JavaMail.zimbra@cal.net> While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Mon Mar 13 22:39:19 2017 From: goldengt at cal.net (goldengt) Date: Mon, 13 Mar 2017 21:39:19 -0700 Subject: [Healeys] drive BN2 without safety gage Sure. ?Thatis the best way but he has already shipped his gages to the rebuilder.Ken? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: John Davidson Date: 3/13/17 5:52 PM (GMT-08:00) To: goldengt at cal.net, 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go.?Again, not knowing the reason for not installing the gauges; just my 2 cents worth.?John R Davidson, P. Eng.H (204) 895-4523, C (204) 295-9207?From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage?My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks.For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut.Ken Freese65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Mon Mar 13 22:50:28 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Mon, 13 Mar 2017 21:50:28 -0700 Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> Follow-up question-what's the list's experience with various high temp exhaust paints? Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bruce Steele Sent: Monday, March 13, 2017 4:05 PM To: 'Healey List' Subject: [Healeys] VHT primer and paint Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I've read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdavidso at shaw.ca Tue Mar 14 05:53:04 2017 From: jdavidso at shaw.ca (John Davidson) Date: Tue, 14 Mar 2017 06:53:04 -0500 Subject: [Healeys] drive BN2 without safety gage References: And now I know. The radiator fitting thread I believe to be BSP (British Standard Pipe) and is not easily found in North America. And the radiator is pressurized to 7 psi normally. I have no further suggestions for the temperature gauge. Sorry John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: goldengt [mailto:goldengt at cal.net] Sent: March-13-17 11:39 PM To: John Davidson ; 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage Sure. Thatis the best way but he has already shipped his gages to the rebuilder. Ken Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: John Davidson Date: 3/13/17 5:52 PM (GMT-08:00) To: goldengt at cal.net, 'healey list' Subject: RE: [Healeys] drive BN2 without safety gage While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. Again, not knowing the reason for not installing the gauges; just my 2 cents worth. John R Davidson, P. Eng. H (204) 895-4523, C (204) 295-9207 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net Sent: March-13-17 5:07 PM To: healey list Subject: [Healeys] drive BN2 without safety gage My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From einhornlawoffice at gmail.com Tue Mar 14 07:17:44 2017 From: einhornlawoffice at gmail.com (Jonathan Einhorn) Date: Tue, 14 Mar 2017 09:17:44 -0400 Subject: [Healeys] Dashboards 100-4 and 100-6 How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. thanks jon -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 07:44:21 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 14:44:21 +0100 (CET) Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> No, but I've had very satisfactory results with DEI High-Temp Silicone Coating. It's outlasted the BBQ paint I tried. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 12:04 AM Bruce Steele wrote: > > > Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I?ve read some positive comments on line. Available at AutoZone, among others. > > > > Bruce Steele > > Brea, CA > > 1960 BN7 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 07:54:20 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 14:54:20 +0100 (CET) Subject: [Healeys] drive BN2 without safety gage References: <000601d29cb9$8c406940$a4c13bc0$@shaw.ca> If he can't find a suitable bolt or plug I think a laboratory grade rubber stopper would work if you 'screw' it in. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 12:53 PM John Davidson wrote: > > > And now I know. The radiator fitting thread I believe to be BSP (British Standard Pipe) and is not easily found in North America. And the radiator is pressurized to 7 psi normally. I have no further suggestions for the temperature gauge. Sorry > > > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > > > From: goldengt [mailto:goldengt at cal.net] > Sent: March-13-17 11:39 PM > To: John Davidson ; 'healey list' > Subject: RE: [Healeys] drive BN2 without safety gage > > > > Sure. Thatis the best way but he has already shipped his gages to the rebuilder. > > Ken > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: John Davidson > > Date: 3/13/17 5:52 PM (GMT-08:00) > > To: goldengt at cal.net, 'healey list' > > Subject: RE: [Healeys] drive BN2 without safety gage > > > > While not knowing the background reasons for not installing the gauges, I would strongly recommend temporarily installing the oil pressure and water temp. Lay a cloth or suitable non-scratch material over the cowl in front of the windshield, tape done (or otherwise hold from sliding) and tape the gauges down onto it. Connect the gauges into the engine and radiator. Support the hood on a block of rubber or wood to allow the piping to exit the engine bay and you should be good to go. This is faster and less risk than a jury rigged plug letting go unexpectedly or worse yet, without knowing that it has let go. > > > > Again, not knowing the reason for not installing the gauges; just my 2 cents worth. > > > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > > > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of goldengt at cal.net > Sent: March-13-17 5:07 PM > To: healey list > Subject: [Healeys] drive BN2 without safety gage > > > > My friend needs to drive his BN2 to my house without his gages installed. I could tell him to use a bolt for the radiator, but I don't know what size to tell him, I thought it might be non standard. Would someone tell me, thanks. > > For the oil, he remove the hose from the block and replace with a upside down screw head and a nut like the steering box olive nut. > > Ken Freese > > 65 BJ8 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 14 08:24:08 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 14 Mar 2017 15:24:08 +0100 (CET) Subject: [Healeys] Dashboards 100-4 and 100-6 References: Good question! I don't know the difference, but if you advertise it as a '100M Fascia' you'll get three times as much for it. Bob -------------------------------- Bob Spidell - San Jose, CA > On March 14, 2017 at 2:17 PM Jonathan Einhorn wrote: > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 > einhornlawoffice at gmail.com mailto:einhornlawoffice at gmail.com > fax: 203-782-1721 > cell: 203-623-7373 > _______________________________________________ > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Tue Mar 14 09:17:02 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Tue, 14 Mar 2017 08:17:02 -0700 Subject: [Healeys] Dashboards 100-4 and 100-6 References: The 6 cylinder cars have a hole in the dash for the steering column to come thru and the 4 cylinder cars have a upside down U f or the column. David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com From: Jonathan Einhorn Sent: Tuesday, March 14, 2017 6:17 AM To: healey list Subject: [Healeys] Dashboards 100-4 and 100-6 How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. Moss shows different numbers and prices for each. thanks jon -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 14 09:48:17 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 14 Mar 2017 11:48:17 -0400 Subject: [Healeys] VHT primer and paint References: <021601d29c4e$3a252260$ae6f6720$@roadrunner.com> <1176350408.1615591.1489499061959@connect.xfinity.com> I installed a new stainless steel exhaust system in my BJ8 in 1986 and painted it before installation with Plasti-Kote Universal #203 Black engine paint. No need to repaint since then. I painted only the pipes and mufflers, not the exhaust manifold. I did not use a separate primer. Recently I repainted the engine in my MG Midget with VHT gray engine primer and black topcoat because that was what is available now locally, but I have not yet reinstalled the engine so I can't comment on its durability. The can says it is good to 550 deg. F (288 C). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Tuesday, March 14, 2017 9:44 AM To: Healey List; Bruce Steele Subject: Re: [Healeys] VHT primer and paint No, but I've had very satisfactory results with DEI High-Temp Silicone Coating. It's outlasted the BBQ paint I tried. Bob -------------------------------- Bob Spidell - San Jose, CA On March 14, 2017 at 12:04 AM Bruce Steele wrote: Getting my exhaust ready for paint. Anyone have experience with VHT primer and paint? I?ve read some positive comments on line. Available at AutoZone, among others. Bruce Steele Brea, CA 1960 BN7 -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 14 10:39:34 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 14 Mar 2017 09:39:34 -0700 Subject: [Healeys] Dashboards 100-4 and 100-6 References: <1566F0DEE7494744914C2B1464ABB966@DavidNockHP> 4 cyl [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 14, 2017 at 8:17 AM, David Nock BCS wrote: > The 6 cylinder cars have a hole in the dash for the steering column to > come thru and the 4 cylinder cars have a upside down U f or the column. > > David Nock > British Car Specialists > 209-948-8767 <(209)%20948-8767> > www.britishcarspecialists.com > > *From:* Jonathan Einhorn > *Sent:* Tuesday, March 14, 2017 6:17 AM > *To:* healey list > *Subject:* [Healeys] Dashboards 100-4 and 100-6 > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. > Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 <(203)%20777-3777> > einhornlawoffice at gmail.com > fax: 203-782-1721 <(203)%20782-1721> > cell: 203-623-7373 <(203)%20623-7373> > > ------------------------------ > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at sbcglobal.net > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 118888 bytes Desc: not available URL: From waschu2 at gmail.com Tue Mar 14 12:03:17 2017 From: waschu2 at gmail.com (Wayne Schultz) Date: Tue, 14 Mar 2017 14:03:17 -0400 Subject: [Healeys] Healey phase 2 rear end serial number range I am trying to date a couple late BJ-8 rear end housings by their serial numbers. Does anyone have that information from 1965 to 1967? I understand that not all housings had serial numbers. Thanks Wayne -------------- next part -------------- An HTML attachment was scrubbed... URL: From kentmclean at comcast.net Tue Mar 14 15:00:59 2017 From: kentmclean at comcast.net (Kent McLean) Date: Tue, 14 Mar 2017 17:00:59 -0400 Subject: [Healeys] Banshee on Healey chassis Barn Finds has and interesting story about a FiberFab Banshee for sale. http://barnfinds.com/can-hear-wail-1966-fiberfab-banshee/ It is on a ?60s? Austin-Healey chassis, with a 2.3L Ford engine and automatic transmission. That combo sounds a lot less exciting than the promise of the Banshee in this picture: http://www.mgexp.com/phile/1/210116/Fiberfab_banshee_corvette.jpg ebay link here: http://www.ebay.com/itm/172573110399 - Kent McLean ?56 100 BN2 From sbyers at ec.rr.com Tue Mar 14 15:10:45 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 14 Mar 2017 17:10:45 -0400 Subject: [Healeys] Healey phase 2 rear end serial number range References: Wayne, I'm surprised you didn't check with the BJ8 Registry first. The BMIHT certificates sometimes give the rear axle number, but there are apparently long strings of cars in their records for which no rear axle number was recorded and are therefore not on the certificate. And you are correct that some axle housings apparently have no serial number (mine doesn't). The BJ8 Registry now has data, records, and ownership history for almost exactly 50% of the total BJ8 production (8,853 of 17,712), including copies of certificates for 935 chassis numbers (plus BMIHT data for several thousand more for which no certificate is available). There are 1,247 rear axle numbers identified to the chassis number currently in the registry. Rear axle numbers for very early BJ8s were generally much higher than later ones and could vary widely in sequence with the chassis number (e.g., chassis 25317 had rear axle 23564, chassis 25507 had rear axle 28736; but chassis 26898 had rear axle 505). Later cars seem to have a more reliable pattern to the numbers. What are the serial numbers you are interested in? Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Wayne Schultz Sent: Tuesday, March 14, 2017 2:03 PM To: healeys at autox.team.net Subject: [Healeys] Healey phase 2 rear end serial number range I am trying to date a couple late BJ-8 rear end housings by their serial numbers. Does anyone have that information from 1965 to 1967? I understand that not all housings had serial numbers. Thanks Wayne Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From einhornlawoffice at gmail.com Tue Mar 14 15:16:39 2017 From: einhornlawoffice at gmail.com (Jonathan Einhorn) Date: Tue, 14 Mar 2017 17:16:39 -0400 Subject: [Healeys] Dashboards 100-4 and 100-6 References: <1566F0DEE7494744914C2B1464ABB966@DavidNockHP> Thanks: another part of the Healey Education. Mine (I have two), are from a 100-4. jon On Tue, Mar 14, 2017 at 11:17 AM, David Nock BCS wrote: > The 6 cylinder cars have a hole in the dash for the steering column to > come thru and the 4 cylinder cars have a upside down U f or the column. > > David Nock > British Car Specialists > 209-948-8767 <(209)%20948-8767> > www.britishcarspecialists.com > > *From:* Jonathan Einhorn > *Sent:* Tuesday, March 14, 2017 6:17 AM > *To:* healey list > *Subject:* [Healeys] Dashboards 100-4 and 100-6 > > How do I tell if a dash is for a 100-4 or a 100-6? I have one I can sell. > Moss shows different numbers and prices for each. > > thanks > jon > > -- > Jonathan J. Einhorn, Esq. > Attorney & Counselor at Law > 129 Whitney Avenue > New Haven, CT. 06510 > tel: 203-777-3777 <(203)%20777-3777> > einhornlawoffice at gmail.com > fax: 203-782-1721 <(203)%20782-1721> > cell: 203-623-7373 <(203)%20623-7373> > > ------------------------------ > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at sbcglobal.net > > -- Jonathan J. Einhorn, Esq. Attorney & Counselor at Law 129 Whitney Avenue New Haven, CT. 06510 tel: 203-777-3777 einhornlawoffice at gmail.com fax: 203-782-1721 cell: 203-623-7373 -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyguy at aol.com Tue Mar 14 17:18:26 2017 From: healeyguy at aol.com (Perry) Date: Tue, 14 Mar 2017 19:18:26 -0400 Subject: [Healeys] Banshee on Healey chassis References: <9D748855-25CC-4119-A6D8-44E037553ACD@comcast.net> Since you mentioned Fiberfab, I have a complete Jamaican Fiberfab body including the glass that was mounted on a Healey chassis. It was in primer and driven s few times before the previous owner decided to sell off the AH chassis and mechanicals. If someone is really interested send me an email to discuss. They sold for about a $1000 In the late 60's. That's $6900 US today. Should be worth a few laughs! Perry Sent from my iPhone > On Mar 14, 2017, at 5:00 PM, Kent McLean wrote: > > Barn Finds has and interesting story about a FiberFab Banshee for sale. > > http://barnfinds.com/can-hear-wail-1966-fiberfab-banshee/ > > It is on a ?60s? Austin-Healey chassis, with a 2.3L Ford engine and automatic transmission. That combo sounds a lot less exciting than the promise of the Banshee in this picture: > http://www.mgexp.com/phile/1/210116/Fiberfab_banshee_corvette.jpg > > ebay link here: > http://www.ebay.com/itm/172573110399 > > - > Kent McLean > ?56 100 BN2 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyguy at aol.com > From bspidell at comcast.net Wed Mar 15 13:16:12 2017 From: bspidell at comcast.net (Bob Spidell) Date: Wed, 15 Mar 2017 12:16:12 -0700 Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend. At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot. AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob From goldengt at cal.net Wed Mar 15 14:00:37 2017 From: goldengt at cal.net (goldengt) Date: Wed, 15 Mar 2017 13:00:37 -0700 Subject: [Healeys] Starter Worked ok when I had 175 psi.Ken Freese?65BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Bob Spidell Date: 3/15/17 12:16 PM (GMT-08:00) To: Healeys Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend.? At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot.? AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression?? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at sbcglobal.net Wed Mar 15 14:28:24 2017 From: healeydoc at sbcglobal.net (David Nock BCS) Date: Wed, 15 Mar 2017 13:28:24 -0700 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> We have both the original style rebuilt starters and the gear reduction starters available David Nock British Car Specialists 209-948-8767 www.britishcarspecialists.com -----Original Message----- From: Bob Spidell Sent: Wednesday, March 15, 2017 12:16 PM To: Healeys Subject: [Healeys] Starter Finally got my rebuilt engine in my BJ8 and started this weekend. At first, it ran rough and backfired, but we spotted a secondary ignition lead shorting out--which probably caused the backfiring--and the timing was inexplicably set way retarded and once that was corrected it runs like the proverbial Swiss watch. Based on my scientific analysis--feeling the exhaust pulses at the tailpipe--this engine is making big bangs so the compression should be excellent (I'm hoping for 160psi on all 6 or better). But--there's always a 'but'--my starter seems to have become impotent as far as cranking the engine when (both are) hot. AFAIK the starter is original and not rebuilt and has nearly 200K miles on it so a rebuild is likely in order but are our old Lucas starters up to motivating a fresh engine with good compression? I really don't want to go with a gear reduction starter, but if the old Lucas whiffs what else can I do? TIA, Bob _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net From coudesluijs at chello.nl Wed Mar 15 16:41:30 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Wed, 15 Mar 2017 23:41:30 +0100 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs Op 15-3-2017 om 20:16 schreef Bob Spidell: > Finally got my rebuilt engine in my BJ8 and started this weekend. At > first, it ran rough and backfired, but we spotted a secondary ignition > lead shorting out--which probably caused the backfiring--and the > timing was inexplicably set way retarded and once that was corrected > it runs like the proverbial Swiss watch. Based on my scientific > analysis--feeling the exhaust pulses at the tailpipe--this engine is > making big bangs so the compression should be excellent (I'm hoping > for 160psi on all 6 or better). But--there's always a 'but'--my > starter seems to have become impotent as far as cranking the engine > when (both are) hot. AFAIK the starter is original and not rebuilt > and has nearly 200K miles on it so a rebuild is likely in order but > are our old Lucas starters up to motivating a fresh engine with good > compression? I really don't want to go with a gear reduction starter, > but if the old Lucas whiffs what else can I do? > > TIA, > > Bob > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > > > From jmsdarch at sbcglobal.net Wed Mar 15 22:11:21 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Wed, 15 Mar 2017 21:11:21 -0700 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> The auto electric shop I deal with does not recommend turning the commutator because, at the age of our cars, the copper is very fragile. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys Sent: Wednesday, March 15, 2017 3:42 PM To: healeys at autox.team.net Subject: Re: [Healeys] Starter The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs From rrengineer.mike at att.net Wed Mar 15 23:05:25 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Thu, 16 Mar 2017 05:05:25 +0000 (UTC) Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> <000101d29e0b$5f01fb80$1d05f280$@sbcglobal.net> I just had the starter and generator rebuilt at a shop that has been in business since the sixties. ?They turned the commutator on the generator and filed down the material ber ween the copper blades. ?They did not have the brushes in stock, so the cut a pair that were close. ?It was CP Generator in Rialto here in SoCal.Mike MacLean Sent from Yahoo Mail on Android On Wed, Mar 15, 2017 at 9:35 PM, John Spaur wrote: The auto electric shop I deal with does not recommend turning the commutator because, at the age of our cars, the copper is very fragile. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys Sent: Wednesday, March 15, 2017 3:42 PM To: healeys at autox.team.net Subject: Re: [Healeys] Starter The starter is powerful enough. A proper rebuild is all it needs. A good clean of the commutator on a lathe and new brushes should bring back the strength. Also new bearings will help. Kees Oudesluijs _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From coudesluijs at chello.nl Thu Mar 16 01:33:53 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Thu, 16 Mar 2017 08:33:53 +0100 Subject: [Healeys] Starter References: <69156b54-7b40-4e29-652d-edd4a1d99659@comcast.net> <000101d29e0b$5f01fb80$1d05f280$@sbcglobal.net> No problem at all. I have done it many times on much older cars. Be gentle and take very small and fine cuts with a very sharp tool at high speed and undercut the insulation properly, i.e. not more than 0,5mm. Kees Oudesluijs Op 16-3-2017 om 5:11 schreef John Spaur: > The auto electric shop I deal with does not recommend turning the commutator > because, at the age of our cars, the copper is very fragile. > John Spaur > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Oudesluys > Sent: Wednesday, March 15, 2017 3:42 PM > To: healeys at autox.team.net > Subject: Re: [Healeys] Starter > > The starter is powerful enough. A proper rebuild is all it needs. A good > clean of the commutator on a lathe and new brushes should bring back the > strength. Also new bearings will help. > Kees Oudesluijs > > > > > From phoenix722 at comcast.net Thu Mar 16 17:22:56 2017 From: phoenix722 at comcast.net (Mike S) Date: Thu, 16 Mar 2017 16:22:56 -0700 Subject: [Healeys] drive BN2 without safety gage References: <000601d29cb9$8c406940$a4c13bc0$@shaw.ca> You might try a motorcycle shop for british threads. Mike BJ8 On 3/14/2017 4:53 AM, John Davidson wrote: > > And now I know. The radiator fitting thread I believe to be BSP > (British Standard Pipe) and is not easily found in North America. And > the radiator is pressurized to 7 psi normally. I have no further > suggestions for the temperature gauge. Sorry > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > *From:*goldengt [mailto:goldengt at cal.net] > *Sent:* March-13-17 11:39 PM > *To:* John Davidson ; 'healey list' > > *Subject:* RE: [Healeys] drive BN2 without safety gage > > Sure. Thatis the best way but he has already shipped his gages to the > rebuilder. > > Ken > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > > From: John Davidson > > Date: 3/13/17 5:52 PM (GMT-08:00) > > To: goldengt at cal.net, 'healey list' > > Subject: RE: [Healeys] drive BN2 without safety gage > > While not knowing the background reasons for not installing the > gauges, I would strongly recommend temporarily installing the oil > pressure and water temp. Lay a cloth or suitable non-scratch material > over the cowl in front of the windshield, tape done (or otherwise hold > from sliding) and tape the gauges down onto it. Connect the gauges > into the engine and radiator. Support the hood on a block of rubber or > wood to allow the piping to exit the engine bay and you should be good > to go. This is faster and less risk than a jury rigged plug letting go > unexpectedly or worse yet, without knowing that it has let go. > > Again, not knowing the reason for not installing the gauges; just my 2 > cents worth. > > John R Davidson, P. Eng. > > H (204) 895-4523, C (204) 295-9207 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *goldengt at cal.net > *Sent:* March-13-17 5:07 PM > *To:* healey list > *Subject:* [Healeys] drive BN2 without safety gage > > My friend needs to drive his BN2 to my house without his gages > installed. I could tell him to use a bolt for the radiator, but I > don't know what size to tell him, I thought it might be non standard. > Would someone tell me, thanks. > > For the oil, he remove the hose from the block and replace with a > upside down screw head and a nut like the steering box olive nut. > > Ken Freese > > 65 BJ8 > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmags at cox.net Thu Mar 16 18:27:08 2017 From: fmags at cox.net (Frank Magnusson) Date: Thu, 16 Mar 2017 19:27:08 -0500 Subject: [Healeys] Starter Hi Bob, I had the exact same problem on my BJ8. When hot (like stopping for,gas....) it would not turn over at all. Cold it worked fine. Just needs a rebuild. Incidentally, I did have mine rebuilt locally and no difference, so whatever they did it obviously wasnt right. I got a rebuilt starter from one of the major Healey suppliers and problem fixed. Frank Sent from my iPad From bspidell at comcast.net Thu Mar 16 20:23:02 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 16 Mar 2017 19:23:02 -0700 Subject: [Healeys] Throttle Springs I carelessly overstretched my old throttle return springs--2 of them on my BJ8--removing them before rebuild but thought 'No big deal; they're only a couple bucks apiece.' So I bought new ones, installed them, and the resistance in the gas pedal is so light I'm not sure the car (BJ8) will be as driveable; i.e. the pedal 'touch' may be too sensitive. Since I replaced seriously worn throttle shaft bushes with teflon/nylon, the change may be due to that--I'm just used to pushing harder on a worn out mechanism--or, possibly, the repo springs are weaker (they DO look a little wimpier). I haven't driven the car yet--maybe I'll prefer a lighter pedal--but has anyone else bought new springs and thought they weren't as, er, springy as the originals? Bob From thehartnetts at earthlink.net Thu Mar 16 23:04:24 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Thu, 16 Mar 2017 22:04:24 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November 1966. Delivered (dispatched) 16 Mar 1967.. Running strong as ever with 214,691 miles on the odo. Birthday present: gets to participate in the St. Patrick's Day parade in Old Sacramento on Saturday. Will be joining eleven other cars from the United British Sports Car Club. (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Birthday 2 Ani.gif Type: image/gif Size: 4677 bytes Desc: not available URL: From austinhealeyslist at gmail.com Fri Mar 17 00:01:45 2017 From: austinhealeyslist at gmail.com (A H List) Date: Fri, 17 Mar 2017 19:01:45 +1300 Subject: [Healeys] Starter References: <8E419F80-0888-479F-8BCE-D073C9FEB4A5@cox.net> The one thing that makes a world of difference to the cranking speed is undercutting the insulation on the commutator. The Lucas instructions forbid it big letters but hey, like those brake caliper bolts which we must never undo, there is no good reason not to and there are significant benefits to doing so. Apparently the insulation between the segments is supposed to wear down faster than the copper but in reality it doesn't and creates a high resistance which equals slow or no cranking when hot. On 3/17/17, Frank Magnusson wrote: > Hi Bob, > > I had the exact same problem on my BJ8. When hot (like stopping > for,gas....) it would not turn over at all. Cold it worked fine. Just > needs a rebuild. Incidentally, I did have mine rebuilt locally and no > difference, so whatever they did it obviously wasnt right. I got a rebuilt > starter from one of the major Healey suppliers and problem fixed. > > Frank > > Sent from my iPad > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/austinhealeyslist at gmail.com > > From bspidell at comcast.net Fri Mar 17 08:38:19 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 07:38:19 -0700 Subject: [Healeys] Petroflex Fuel Line The new flexible rubber/stainless wrap fuel line I recently purchased is a bit shorter than the previous one, but still too long to route from the hard line to the front carb without a large 'S turn.' Can these be safely--and 'cleanly'--cut or otherwise shortened without damaging them? I'm thinking: a) measure twice, b) wrap the point of the cut with masking tape, c) cut (once) with air cutoff tool or ?. Anyone done this? The old line, also Petroflex, while a bit less flexible than the new one, was in good enough shape to keep using, but I figured overhaul time was a good time to replace all rubber components. Also, the jet diaphragms in my HD8s were likewise stiffer than new ones, and showed some minute cracks, but were otherwise serviceable. Both components have at least 20 years and 70-80K miles of service, on mostly California--i.e. ethanol spiked--gas. The radiator hoses were like new and could have been reused as well. Bob From bspidell at comcast.net Fri Mar 17 10:59:26 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 09:59:26 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 References: Len, Looks like our cars 'graduated' from the same class. My car, number 38652, was conceived '12 October - 1 November 1966' and 'despatched' (sic) 15 November 1966. But, my car's a slacker: only 195K miles (give-or-take). Bob On 3/16/2017 10:04 PM, Len and/or Marge Hartnett wrote: > Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November > 1966. > Delivered (dispatched) 16 Mar 1967.. Running strong as ever with > 214,691 miles on the odo. Birthday present: gets to participate in > the St. Patrick's Day parade in Old Sacramento on Saturday. Will be > joining eleven other cars from the United British Sports Car Club. > (The Other) Len > Fairfield, CA, USA > 1967 AH 3000 MkIII, HBJ8L39031 > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell at comcast.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4677 bytes Desc: not available URL: From michaelsalter at gmail.com Fri Mar 17 11:28:08 2017 From: michaelsalter at gmail.com (Michael Salter) Date: Fri, 17 Mar 2017 13:28:08 -0400 Subject: [Healeys] Handbook Supplement ?We have been writing a supplement for the Concours Guidelines and are looking for some good scans or photographs of the following publication. *Oct, 1956, Pub # 1434 - "Austin-Healey "100 - SIX" PRELIMINARY MAINTENANCE INSTRUCTIONS" - this is a 6 page hardback folder* Anyone on the list who could help with that? Michael S Technical Chairman*? *Big Healeys Concours Guidelines Committee -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Fri Mar 17 11:32:31 2017 From: phoenix722 at comcast.net (Mike S) Date: Fri, 17 Mar 2017 10:32:31 -0700 Subject: [Healeys] Happy Birthday BJ8L39031 References: <74a9c23c-59db-de47-ca2c-e00046d5b958@comcast.net> Happy birthday 'ol 39031. I will attach a picture of my previous AH, born in 1956. The picture is from 1968, with my son, Jon, who turns 50 today (17th). On 3/17/2017 9:59 AM, Bob Spidell wrote: > > Len, > > Looks like our cars 'graduated' from the same class. My car, number > 38652, was conceived '12 October - 1 November 1966' and 'despatched' > (sic) 15 November 1966. > > But, my car's a slacker: only 195K miles (give-or-take). > > Bob > > > On 3/16/2017 10:04 PM, Len and/or Marge Hartnett wrote: >> Happy 50th Birthday to HBJ8L39031. Conceived (built) 10-17 November >> 1966. >> Delivered (dispatched) 16 Mar 1967.. Running strong as ever with >> 214,691 miles on the odo. Birthday present: gets to participate in >> the St. Patrick's Day parade in Old Sacramento on Saturday. Will be >> joining eleven other cars from the United British Sports Car Club. >> (The Other) Len >> Fairfield, CA, USA >> 1967 AH 3000 MkIII, HBJ8L39031 >> >> >> _______________________________________________ >> Support Team.Nethttp://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive:http://www.team.net/archive >> Forums:http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/bspidell at comcast.net >> > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4677 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: AH 100M with Jon, Oct 1968.jpg Type: image/jpeg Size: 2372340 bytes Desc: not available URL: From austinhealeyslist at gmail.com Fri Mar 17 15:19:25 2017 From: austinhealeyslist at gmail.com (A H List) Date: Sat, 18 Mar 2017 10:19:25 +1300 Subject: [Healeys] Hood grille insert- on top or underneath? Was the chrome grille section of the hood air scoop on the six cylinder cars originally fitted from underneath the hood metal or on top of it, underneath the trim? It fits better on top, but then the upper trim gets angled upwards slightly which looks odd. Underneath it digs into the paint at the bottom, as do the ends of the trim. Completely inside- definitely not correct http://www.alamy.com/stock-photo-austin-healey-bonnet-badge-48145309.html Underneath- looks nice but you can see the paint getting damaged at the edges http://www.alamy.com/stock-photo-austin-healey-car-badge-31424979.html On top- clears the paint but sits up and looks a bit odd http://www.alamy.com/stock-photo-austine-healey-3000-mk3-bonnet-badge-detail-113502437.html https://images.fineartamerica.com/images-medium-large-5/austin-healey-3000-grille-emblem-jill-reger.jpg Andy. From rrengineer.mike at att.net Fri Mar 17 18:30:29 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Sat, 18 Mar 2017 00:30:29 +0000 (UTC) Subject: [Healeys] Yet Another Oil Thread References: <336437506.2507068.1489797029464.ref@mail.yahoo.com> What do you think of Lucas Break in oil.? Says it is 3600 PPM of zinc.? Is that too much? Mike MacLean -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Fri Mar 17 18:56:12 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 17:56:12 -0700 Subject: [Healeys] Yet Another Oil Thread References: <336437506.2507068.1489797029464.ref@mail.yahoo.com> <336437506.2507068.1489797029464@mail.yahoo.com> I hope not. It's what my engine builder used--30W--in my 'new' BJ8 engine for break-in; he swears by it. He says to keep it in for 500 miles. He also says while Valvoline 20W-50 is good, to add ZDDP additive to it. Bob On 3/17/2017 5:30 PM, Michael MacLean wrote: > What do you think of Lucas Break in oil. Says it is 3600 PPM of > zinc. Is that too much? > Mike MacLean > -------------- next part -------------- An HTML attachment was scrubbed... URL: From steveg at abrazosdata.com Fri Mar 17 18:59:28 2017 From: steveg at abrazosdata.com (=?iso-8859-1?Q?Steve=20B.=20Gerow?=) Date: Fri, 17 Mar 2017 16:59:28 -0800 Subject: [Healeys] =?iso-8859-1?q?Throttle_Springs?= Bob, Do you still have the big mousetrap spring on the gas pedal? If that's true and the pedal is still too light, you could add a stretch coil spring between the upper part of the pedal and the steering column lower bracket. I did this for a while in the oughts when Moss was out of stock on the mousetrap springs. -- Steve Gerow Altadena, CA BN6 Maker of Most Complete Big Healey Rear Disc Kit >>> Date: Thu, 16 Mar 2017 19:23:02 -0700 From: Bob Spidell To: Healeys Subject: [Healeys] Throttle Springs I carelessly overstretched my old throttle return springs--2 of them on my BJ8--removing them before rebuild but thought 'No big deal; they're only a couple bucks apiece.' So I bought new ones, installed them, and the resistance in the gas pedal is so light I'm not sure the car (BJ8) will be as driveable; i.e. the pedal 'touch' may be too sensitive. Since I replaced seriously worn throttle shaft bushes with teflon/nylon, the change may be due to that--I'm just used to pushing harder on a worn out mechanism--or, possibly, the repo springs are weaker (they DO look a little wimpier). I haven't driven the car yet--maybe I'll prefer a lighter pedal--but has anyone else bought new springs and thought they weren't as, er, springy as the originals? Bob <<< From bspidell at comcast.net Fri Mar 17 20:54:05 2017 From: bspidell at comcast.net (Bob Spidell) Date: Fri, 17 Mar 2017 19:54:05 -0700 Subject: [Healeys] Throttle Springs References: <20170318005928.22924.qmail@hoster902.com> Might do that, and/or add additional wimpy throttle springs on the manifold. We'll see how the pedal feels when I get her back on the road. Bob On 3/17/2017 5:59 PM, Steve B. Gerow wrote: > Bob, > Do you still have the big mousetrap spring on the gas pedal? > > If that's true and the pedal is still too light, you could add a stretch coil spring between the upper part of the pedal and the steering column lower bracket. I did this for a while in the oughts when Moss was out of stock on the mousetrap springs. From eschulz at frontiernet.net Sat Mar 18 19:19:21 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Sat, 18 Mar 2017 21:19:21 -0400 Subject: [Healeys] Hood grille insert- on top or underneath? References: On top of the hood metal and underneath the trim Elton On 3/17/2017 5:19 PM, A H List wrote: > Was the chrome grille section of the hood air scoop on the six > cylinder cars originally fitted from underneath the hood metal or on > top of it, underneath the trim? > > It fits better on top, but then the upper trim gets angled upwards > slightly which looks odd. Underneath it digs into the paint at the > bottom, as do the ends of the trim. > > Completely inside- definitely not correct > http://www.alamy.com/stock-photo-austin-healey-bonnet-badge-48145309.html > > Underneath- looks nice but you can see the paint getting damaged at the edges > http://www.alamy.com/stock-photo-austin-healey-car-badge-31424979.html > > On top- clears the paint but sits up and looks a bit odd > http://www.alamy.com/stock-photo-austine-healey-3000-mk3-bonnet-badge-detail-113502437.html > https://images.fineartamerica.com/images-medium-large-5/austin-healey-3000-grille-emblem-jill-reger.jpg > > > Andy. > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > > From dwflagg at juno.com Sun Mar 19 09:35:15 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Sun, 19 Mar 2017 15:35:15 GMT Subject: [Healeys] Shelley Tommy Bar Would anyone have a spare Shelley LJ21 56 tommy bar available for purchase? Many thanks. Cheers, Doug ____________________________________________________________ 3 Things You Should Know About Probiotics Gundry MD http://thirdpartyoffers.juno.com/TGL3141/58cea576af58025760661st02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From cleona44 at hotmail.com Sun Mar 19 12:05:25 2017 From: cleona44 at hotmail.com (Jim Lesher) Date: Sun, 19 Mar 2017 18:05:25 +0000 Subject: [Healeys] Handbook Supplement References: Michael - did you have any success? you may want to try a posting in www.britishcarforum.com best of luck ________________________________ From: Healeys on behalf of Michael Salter Sent: Friday, March 17, 2017 1:28 PM To: healeys at autox.team.net Subject: [Healeys] Handbook Supplement We have been writing a supplement for the Concours Guidelines and are looking for some good scans or photographs of the following publication. Oct, 1956, Pub # 1434 - "Austin-Healey "100 - SIX" PRELIMINARY MAINTENANCE INSTRUCTIONS" - this is a 6 page hardback folder Anyone on the list who could help with that? Michael S Technical Chairman Big Healeys Concours Guidelines Committee -------------- next part -------------- An HTML attachment was scrubbed... URL: From 67healey at gmail.com Sun Mar 19 13:42:47 2017 From: 67healey at gmail.com (Healey) Date: Sun, 19 Mar 2017 12:42:47 -0700 Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20170223_121354[1].jpg Type: image/jpeg Size: 3964341 bytes Desc: not available URL: From fmags at cox.net Sun Mar 19 16:33:35 2017 From: fmags at cox.net (Frank Magnusson) Date: Sun, 19 Mar 2017 17:33:35 -0500 Subject: [Healeys] Are these holes original Hi Neil, My '65 BJ8 does not have those. Frank Sent from my iPad From simon.lachlan at homecall.co.uk Sun Mar 19 17:08:24 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Sun, 19 Mar 2017 23:08:24 -0000 Subject: [Healeys] Are these holes original? References: I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------- next part -------------- An HTML attachment was scrubbed... URL: From 050.rpl at gmail.com Sun Mar 19 17:28:57 2017 From: 050.rpl at gmail.com (R. Lindsay) Date: Sun, 19 Mar 2017 19:28:57 -0400 Subject: [Healeys] Are these holes original? References: My 67 has one hole on each side. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 19, 2017, at 3:42 PM, Healey <67healey at gmail.com> wrote: > > 67 BJ8 (late), currently undergoing bodywork before paint. > > There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. > > Pardon the poor picture - hopefully you get the idea. > > Thanks in advance, > > Neil > <20170223_121354[1].jpg> > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > From dwflagg at juno.com Sun Mar 19 17:51:56 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Sun, 19 Mar 2017 23:51:56 GMT Subject: [Healeys] Are these holes original? Or full the holes? I’d guess (only) that those four holes – two at each corner, right? – were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I’ve got one….it’s a decent enough thing.I’m surprised that one fits repair patch panels to a boot lid. Doesn’t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58cf19cc81a8119cc390cst04duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From molony at dodo.com.au Sun Mar 19 20:32:46 2017 From: molony at dodo.com.au (Graeme Molony) Date: Mon, 20 Mar 2017 13:32:46 +1100 Subject: [Healeys] Are these holes original? References: Hi all, I have just checked my late 65 BJ8 which has no holes. As far as I'm aware it is an original trunk lid and has never had a replacement panel on the lid more than I can say for the remainder of the car as all of the lower sections of the panels required replacement when I purchased it 30 years or so ago Graeme M -----Original Message----- From: R. Lindsay Sent: Monday, March 20, 2017 10:28 AM To: Healey Cc: Austin Healey Subject: Re: [Healeys] Are these holes original? My 67 has one hole on each side. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone > On Mar 19, 2017, at 3:42 PM, Healey <67healey at gmail.com> wrote: > > 67 BJ8 (late), currently undergoing bodywork before paint. > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a > function of previous bodywork. > > Pardon the poor picture - hopefully you get the idea. > > Thanks in advance, > > Neil > <20170223_121354[1].jpg> > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/050.rpl at gmail.com > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au From dcorning at ford.com Mon Mar 20 06:12:55 2017 From: dcorning at ford.com (Corning, Dan (D.C.)) Date: Mon, 20 Mar 2017 12:12:55 +0000 Subject: [Healeys] =?windows-1252?q?Smith=92s_Gauge_Oil_/_Temp_Gauge_Senso?= =?windows-1252?q?r?= I recently purchased a replacement Smiths Gauge Oil / Temp Gauge. The gauge was shipped loose in the box and the sensor wire was bent at 90 degrees during shipment. If I bend the wire back would it likely be reliable or should I return it to the vendor? Best, Dan Corning -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_2633.JPG Type: image/jpeg Size: 192140 bytes Desc: IMG_2633.JPG URL: From sbyers at ec.rr.com Mon Mar 20 07:06:55 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Mon, 20 Mar 2017 09:06:55 -0400 Subject: [Healeys] Smith's Gauge Oil / Temp Gauge Sensor References: As long as you don't break the capillary tube, the gauge will work as it should. The tube is made of a very soft metal and can be straightened if done carefully Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Corning, Dan (D.C.) Sent: Monday, March 20, 2017 8:13 AM To: healeys at autox.team.net Subject: [Healeys] Smith's Gauge Oil / Temp Gauge Sensor I recently purchased a replacement Smiths Gauge Oil / Temp Gauge. The gauge was shipped loose in the box and the sensor wire was bent at 90 degrees during shipment. If I bend the wire back would it likely be reliable or should I return it to the vendor? Best, Dan Corning Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeydoc at gmail.com Mon Mar 20 09:00:02 2017 From: healeydoc at gmail.com (David Nock) Date: Mon, 20 Mar 2017 08:00:02 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock healeydoc at sbcglobal.net 209 948 8767 www.britishcarspecialists.com From: Simon Lachlan Sent: Sunday, March 19, 2017 4:08 PM To: 'Healey' ; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 20 09:27:19 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 20 Mar 2017 15:27:19 -0000 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> Send me the distance between the 2 mystery holes and I?ll compare to my luggage rack/my boot lid. Simon From: David Nock [mailto:healeydoc at gmail.com] Sent: 20 March 2017 15:00 To: Simon Lachlan ; 'Healey' <67healey at gmail.com>; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock 209 948 8767 www.britishcarspecialists.com Sent: Sunday, March 19, 2017 4:08 PM Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil _____ _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From 67healey at gmail.com Mon Mar 20 09:53:29 2017 From: 67healey at gmail.com (Healey) Date: Mon, 20 Mar 2017 08:53:29 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> Thanks guys - I appreciate the replies. So, the consensus would be that the holes were for a previously mounted luggage rack. Which makes sense, because the car also has nuts & bolts going through the trunk hinges where the pins would normally be. Which would lead to a follow up question - does anyone know where I could get just the hinge pins (or something equivalent) instead of paying Moss $60 per for each hinge? Does anyone have a couple lying around? :-) @Simon - here is the boot lid patch panel: http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28951#76 It's only a few inches wide, and is really just for repairing the rusty bottom lip. Thanks, Neil On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: > Send me the distance between the 2 mystery holes and I?ll compare to my > luggage rack/my boot lid. > > Simon > > > > *From:* David Nock [mailto:healeydoc at gmail.com] > *Sent:* 20 March 2017 15:00 > *To:* Simon Lachlan ; 'Healey' < > 67healey at gmail.com>; 'Austin Healey' > > *Subject:* Re: [Healeys] Are these holes original? > > > > The only holes along the bottom edge of the trunk lip are for the rivits > that attach shroud to the chassis lip. And the 3 buffers. If there was a > drain hole it would drain into the trunk. > > > > > > David Nock > healeydoc at sbcglobal.net > 209 948 8767 <(209)%20948-8767> > www.britishcarspecialists.com > > > > *From:* Simon Lachlan > > *Sent:* Sunday, March 19, 2017 4:08 PM > > *To:* 'Healey' <67healey at gmail.com> ; 'Austin Healey' > > > *Subject:* Re: [Healeys] Are these holes original? > > > > I?d guess (only) that those four holes ? two at each corner, right? ? were > for the attachment of a luggage rack. There was/is a rack that was attached > via the boot hinge pins and by screwing triangular mounting plates onto the > bottom corners. I?ve got one?.it?s a decent enough thing. > > I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one > just fit a new one? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *Healey > *Sent:* 19 March 2017 19:43 > *To:* Austin Healey > *Subject:* [Healeys] Are these holes original? > > > > 67 BJ8 (late), currently undergoing bodywork before paint. > > > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a function > of previous bodywork. > > > > Pardon the poor picture - hopefully you get the idea. > > > > Thanks in advance, > > > > Neil > ------------------------------ > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at gmail.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 20 12:09:21 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 20 Mar 2017 11:09:21 -0700 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> I'd like to see a photo of how the luggage rack attaches Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: > Send me the distance between the 2 mystery holes and I?ll compare to my > luggage rack/my boot lid. > > Simon > > > > *From:* David Nock [mailto:healeydoc at gmail.com] > *Sent:* 20 March 2017 15:00 > *To:* Simon Lachlan ; 'Healey' < > 67healey at gmail.com>; 'Austin Healey' > *Subject:* Re: [Healeys] Are these holes original? > > > > The only holes along the bottom edge of the trunk lip are for the rivits > that attach shroud to the chassis lip. And the 3 buffers. If there was a > drain hole it would drain into the trunk. > > > > > > David Nock > healeydoc at sbcglobal.net > 209 948 8767 <(209)%20948-8767> > www.britishcarspecialists.com > > > > *From:* Simon Lachlan > > *Sent:* Sunday, March 19, 2017 4:08 PM > > *To:* 'Healey' <67healey at gmail.com> ; 'Austin Healey' > > > *Subject:* Re: [Healeys] Are these holes original? > > > > I?d guess (only) that those four holes ? two at each corner, right? ? were > for the attachment of a luggage rack. There was/is a rack that was attached > via the boot hinge pins and by screwing triangular mounting plates onto the > bottom corners. I?ve got one?.it?s a decent enough thing. > > I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one > just fit a new one? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net > ] *On Behalf Of *Healey > *Sent:* 19 March 2017 19:43 > *To:* Austin Healey > *Subject:* [Healeys] Are these holes original? > > > > 67 BJ8 (late), currently undergoing bodywork before paint. > > > > There appears to be 2 drainage holes on the bottom corners of the trunk > lid - but as the Moss replacement patch panel doesn't have them I don't > know if the holes were there originally, or if they are there as a function > of previous bodywork. > > > > Pardon the poor picture - hopefully you get the idea. > > > > Thanks in advance, > > > > Neil > ------------------------------ > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeydoc at gmail.com > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 20 13:43:09 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 20 Mar 2017 12:43:09 -0700 Subject: [Healeys] MkII. MkIII Howdy During a discussion today their was a question about the mkii 3000 and phase two. Did only the phase 2 cars have front dual running lights or when did the dual front plastic running light change happen on US spec cars Ira Erbs 1959 100-6 MKI engine and disc brakes Portland,OR -------------- next part -------------- An HTML attachment was scrubbed... URL: From schottc at knology.net Mon Mar 20 14:51:49 2017 From: schottc at knology.net (Charlie Schott) Date: Mon, 20 Mar 2017 15:51:49 -0500 Subject: [Healeys] Are these holes original? References: <001201d2a105$b6e0f430$24a2dc90$@homecall.co.uk> <66DF3095FBB34BAE86210D3BF39D8D01@DavidNockHP> <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> Here is what mine looks like. I believe that I got the luggage rack from British Victoria. Regards, Charlie Schott From: i erbs Sent: Monday, March 20, 2017 1:09 PM To: Simon Lachlan Cc: Austin Healey Subject: Re: [Healeys] Are these holes original? I'd like to see a photo of how the luggage rack attaches Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 20, 2017 at 8:27 AM, Simon Lachlan wrote: Send me the distance between the 2 mystery holes and I?ll compare to my luggage rack/my boot lid. Simon From: David Nock [mailto:healeydoc at gmail.com] Sent: 20 March 2017 15:00 To: Simon Lachlan ; 'Healey' <67healey at gmail.com>; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? The only holes along the bottom edge of the trunk lip are for the rivits that attach shroud to the chassis lip. And the 3 buffers. If there was a drain hole it would drain into the trunk. David Nock healeydoc at sbcglobal.net 209 948 8767 www.britishcarspecialists.com From: Simon Lachlan Sent: Sunday, March 19, 2017 4:08 PM To: 'Healey' ; 'Austin Healey' Subject: Re: [Healeys] Are these holes original? I?d guess (only) that those four holes ? two at each corner, right? ? were for the attachment of a luggage rack. There was/is a rack that was attached via the boot hinge pins and by screwing triangular mounting plates onto the bottom corners. I?ve got one?.it?s a decent enough thing. I?m surprised that one fits repair patch panels to a boot lid. Doesn?t one just fit a new one? Simon From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Healey Sent: 19 March 2017 19:43 To: Austin Healey Subject: [Healeys] Are these holes original? 67 BJ8 (late), currently undergoing bodywork before paint. There appears to be 2 drainage holes on the bottom corners of the trunk lid - but as the Moss replacement patch panel doesn't have them I don't know if the holes were there originally, or if they are there as a function of previous bodywork. Pardon the poor picture - hopefully you get the idea. Thanks in advance, Neil ------------------------------------------------------------------------------ _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com -------------------------------------------------------------------------------- _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1557.JPG Type: image/jpeg Size: 2839786 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1558.JPG Type: image/jpeg Size: 2470733 bytes Desc: not available URL: From sbyers at ec.rr.com Mon Mar 20 16:22:15 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Mon, 20 Mar 2017 18:22:15 -0400 Subject: [Healeys] MkII. MkIII References: Phase 1 BJ8s had single lights under the headlamps with small clear glass lenses like BJ7s. The early Phase 2 cars had single lights under the headlamps with larger clear plastic lenses. This was true up to body number 76137. From body 76138 and up, they had dual lights under the headlamps with amber turn signals and clear parking lights. That is according to the BMC parts manual for BJ7/BJ8, but quite a few cars have been found with pre-body number 76138 dual lights and post-body number 76138 with single light configurations. Shrouds may have been changed from original, or maybe not; but it's hard to verify any BMC change that sticks hard and fast to the parts manual. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Monday, March 20, 2017 3:43 PM To: Ahealey help Subject: [Healeys] MkII. MkIII Howdy During a discussion today their was a question about the mkii 3000 and phase two. Did only the phase 2 cars have front dual running lights or when did the dual front plastic running light change happen on US spec cars Ira Erbs 1959 100-6 MKI engine and disc brakes Portland,OR Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmags at cox.net Mon Mar 20 18:53:56 2017 From: fmags at cox.net (Frank Magnusson) Date: Mon, 20 Mar 2017 19:53:56 -0500 Subject: [Healeys] Mk II. Mk III Hi Ira, My '65 BJ8 is a very early phase II car; phase II rear suspension with a phase I body. It has the single plastic running lights in the front and the small reflectors in the rear. Frank Sent from my iPad From gablegerry at netscape.net Mon Mar 20 19:44:46 2017 From: gablegerry at netscape.net (gablegerry at netscape.net) Date: Mon, 20 Mar 2017 21:44:46 -0400 Subject: [Healeys] Healey Blue again Can anyone tell me is the Healey Blue on a BN6 was a solid color or had specs in it? Thanks Gerry -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeymanjim at hansencc.net Mon Mar 20 20:38:09 2017 From: healeymanjim at hansencc.net (=?utf-8?Q?healeymanjim?=) Date: Mon, 20 Mar 2017 19:38:09 -0700 Subject: [Healeys] =?utf-8?q?MKII=2C_MKIII?= lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. From p_cquinn at tpg.com.au Mon Mar 20 23:04:14 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Tue, 21 Mar 2017 16:04:14 +1100 Subject: [Healeys] Mk II. Mk III References: G'day With all 3000s the twin lights were introduced in late March 1965, before than it depended on what country the car was delivered to. With cars delivered new to certain European countries (Sweden and German) some models as early 3000 Mk 1s had dual beehive style sidelights or even smaller lights than that. In the main, with the BJ8 S2 came the wider single plastic lens front and rear. Hoo Roo Patrick Quinn Blue Mountains, Australia -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Frank Magnusson Sent: Tuesday, 21 March 2017 11:54 AM To: healeys at autox.team.net; eyera3000 at gmail.com Subject: Re: [Healeys] Mk II. Mk III Hi Ira, My '65 BJ8 is a very early phase II car; phase II rear suspension with a phase I body. It has the single plastic running lights in the front and the small reflectors in the rear. Frank Sent from my iPad _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/p_cquinn at tpg.com.au From coudesluijs at chello.nl Tue Mar 21 01:35:57 2017 From: coudesluijs at chello.nl (Oudesluys) Date: Tue, 21 Mar 2017 08:35:57 +0100 Subject: [Healeys] MkII. MkIII References: <00b501d2a1c8$6e5f82d0$4b1e8870$@rr.com> It is not unknown that Jensen, who built the AH100-3000 used what was at hand at the moment and during the transition to new models parts of older models were found the new models and v.v. You cannot go by the chassis number around the change to another variant of the model. It is the same in Jensens. It is not uncommon in other makes either. Common sense to get rid of stock which otherwise would get dumped. Kees Oudesluijs Op 20-3-2017 om 23:22 schreef BJ8Healeys: > > Phase 1 BJ8s had single lights under the headlamps with small clear > glass lenses like BJ7s. The early Phase 2 cars had single lights > under the headlamps with larger clear plastic lenses. This was true > up to body number 76137. From body 76138 and up, they had dual lights > under the headlamps with amber turn signals and clear parking lights. > That is according to the BMC parts manual for BJ7/BJ8, but quite a few > cars have been found with pre-body number 76138 dual lights and > post-body number 76138 with single light configurations. Shrouds may > have been changed from original, or maybe not; but it's hard to verify > any BMC change that sticks hard and fast to the parts manual. > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *i erbs > *Sent:* Monday, March 20, 2017 3:43 PM > *To:* Ahealey help > *Subject:* [Healeys] MkII. MkIII > > Howdy > During a discussion today their was a question about the mkii 3000 > and phase two. Did only the phase 2 cars have front dual running lights > > or when did the dual front plastic running light change happen on US > spec cars > > Ira Erbs > 1959 100-6 > MKI engine and disc brakes > Portland,OR > > > > > > Virus-free. www.avg.com > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 07:14:53 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 09:14:53 -0400 Subject: [Healeys] MKII, MKIII References: <20170321023809.555.qmail@server278.com> As stated before, the light configuration change was based on body number, not chassis number. BMIHT data records the change point body number at 76138 for the dual lights. The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. From healeyrik at gmail.com Tue Mar 21 08:47:17 2017 From: healeyrik at gmail.com (HealeyRick) Date: Tue, 21 Mar 2017 10:47:17 -0400 Subject: [Healeys] Last Big Healey? *When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the *Austin-Healey 3000 Mk III * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. *?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,?* said Richard Greenhalgh, specialist at Classic Car Auctions . So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen . And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 09:43:31 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 08:43:31 -0700 Subject: [Healeys] Last Big Healey? References: Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 Fantastic looking car. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 09:45:53 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 08:45:53 -0700 Subject: [Healeys] MKII, MKIII References: <20170321023809.555.qmail@server278.com> <00fa01d2a245$21090c90$631b25b0$@rr.com> Thanks, So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > As stated before, the light configuration change was based on body number, > not chassis number. BMIHT data records the change point body number at > 76138 for the dual lights. The data also says that body number belonged to > both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March > 1965). > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > healeymanjim > Sent: Monday, March 20, 2017 10:38 PM > To: healeys at autox.team.net > Subject: [Healeys] MKII, MKIII > > lady in our club had a bj8 with dual lights that she bought at the factory > in june, 1965. no idea of exact changover. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From per at schoerner.se Tue Mar 21 10:01:16 2017 From: per at schoerner.se (Per Schoerner) Date: Tue, 21 Mar 2017 17:01:16 +0100 Subject: [Healeys] Last Big Healey? References: I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums From gbrierton at hotmail.com Tue Mar 21 10:51:42 2017 From: gbrierton at hotmail.com (Gary R. Brierton) Date: Tue, 21 Mar 2017 16:51:42 +0000 Subject: [Healeys] Last Big Healey? References: , Wasn't that car originally white? ________________________________ From: Healeys on behalf of i erbs Sent: Tuesday, March 21, 2017 11:43 AM To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 1967 Austin Healey 3000 MK III - Classic Car Auctions www.classiccarauctions.co.uk Offered for sale is a 3.0L 1967 Austin Healey 3000 MK 3 manual that has been with the current owner for the last 44 years. Coming with a partial history file, this ... Fantastic looking car. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eschulz at frontiernet.net Tue Mar 21 10:57:23 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Tue, 21 Mar 2017 12:57:23 -0400 Subject: [Healeys] Last Big Healey? References: HS6 carbs? Elton On 3/21/2017 10:47 AM, HealeyRick wrote: > *When talking British classics, it's impossible to ignore the likes of > the Jaguar E-Type and Aston Martin DB5. But while those are pop icons > in their own right, the *Austin-Healey 3000 Mk III > * is > a bit of a specialty. > *As compared to Jaguar and Aston Martin, which are still with us, the > venture created by Austin and Donald Healey Motor in 1952 came to a > conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk > III is the car Austin-Healey enthusiasts consider to be the British > outfit's crowning achievement. > > 17,712 examples of the Mark III were produced from '64 to '67, and > this here is the last one ever made. Chassis HBJ843025 was > manufactured on the 21st of December, 1967, and the current owner > bought it 45 years ago. Yup, this is one cherished example of the 3000 > Mk III, a back-to-basics sports car > to > die for. Better still, it has covered only 57,389 miles (92,358 > kilometers) over the course of half a century. > > /"This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect > a significant amount of interest,"/ said Richard Greenhalgh, > specialist at Classic Car Auctions > . So > what's the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA's pre-auction estimate, but only time will tell if > bidding will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey's last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six > powerplant benefits from a high-lift camshaft and SU HS6 carbs, > additions that saw power go up from 136 to 150 bhp. And compared to > the previous iteration, the Mk III boasts power-assisted brakes as > standard. > > Last, but not least, it's noteworthy to point out that this is no > garage queen > . > And even restored, the final Big Healey doesn't fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Tue Mar 21 11:30:21 2017 From: goldengt at cal.net (goldengt) Date: Tue, 21 Mar 2017 10:30:21 -0700 Subject: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked?Ken Freese?65 BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: i erbs Date: 3/21/17 8:45 AM (GMT-08:00) To: BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII Thanks,So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira ErbsPortland,OR? ? ? _______ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?_______ ? ?? (______ \____1959 BN4____/ _______) ? ? ? ?? (_________________________)? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: As stated before, the light configuration change was based on body number, not chassis number.? BMIHT data records the change point body number at 76138 for the dual lights.? The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC? -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965.? no idea of exact changover. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Tue Mar 21 11:46:27 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Tue, 21 Mar 2017 17:46:27 -0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Don't know about the colour but I'd always thought - and my books confirm - that the last 3000 was a one-off in '68 and that its chassis number was 43026. Fair enough...this one is '67 and 43025 so they're really saying that it was the last one off the regular production line. I'd hesitate to say last "mass-produced" BJ8! Such trivia....didn't I see that the original email talked about HS6 carbs? Simon -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per Schoerner Sent: 21 March 2017 16:01 To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From ahbn6 at verizon.net Tue Mar 21 11:53:32 2017 From: ahbn6 at verizon.net (John Sims) Date: Tue, 21 Mar 2017 13:53:32 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Wonder of this was painted the famous Metallic Gold Beige when it was restored. What does the Heritage certificate show? John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per Schoerner Sent: Tuesday, March 21, 2017 12:01 PM To: HealeyRick Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr n min iPad > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > forums _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From thehartnetts at earthlink.net Tue Mar 21 12:14:11 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Tue, 21 Mar 2017 11:14:11 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > From healeyrik at gmail.com Tue Mar 21 12:55:19 2017 From: healeyrik at gmail.com (HealeyRick) Date: Tue, 21 Mar 2017 14:55:19 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> Why is it never easy? We need Steve Byers in here to officiate. From Graham Robson's "The Big Healeys", 43025 was the last production car coming off the production line on 12/21/67. Two more cars, 43000 and 43007 were finished in January 1968. The last car, 43026 was built from scratch and finished March 14, 1968. 43026 is detailed here and is white: http://www.ahexp.com/registry/HBJ843026 Robson's book also contains a picture of a BJ8 going down the line with a sign saying "The End" on it, which I'm guessing is 43025. It appears to be a rather dark color (maybe BRG) so perhaps the GBM is a repaint (and why would you change the color of the last production car?) Confusing Healeying, Rick Neville On Tue, Mar 21, 2017 at 1:46 PM, Simon Lachlan wrote: > Don't know about the colour but I'd always thought - and my books confirm > - that the last 3000 was a one-off in '68 and that its chassis number was > 43026. > Fair enough...this one is '67 and 43025 so they're really saying that it > was the last one off the regular production line. I'd hesitate to say last > "mass-produced" BJ8! > Such trivia....didn't I see that the original email talked about HS6 carbs? > Simon > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per > Schoerner > Sent: 21 March 2017 16:01 > To: HealeyRick > Cc: healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > > > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > > > forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/simon.lachlan at homecall.co.uk > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.ewald at gmail.com Tue Mar 21 13:12:36 2017 From: richard.ewald at gmail.com (Richard Ewald) Date: Tue, 21 Mar 2017 12:12:36 -0700 Subject: [Healeys] Car for sale Some people look at the way things aren't and say why not, other people look at what those first people did and say WTF? http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod-Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr There are no words. Rick -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:19:33 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:19:33 -0700 Subject: [Healeys] Last Big Healey? References: I figured Kurt Tanner did the restoration Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 9:51 AM, Gary R. Brierton wrote: > Wasn't that car originally white? > > > ------------------------------ > *From:* Healeys on behalf of i erbs < > eyera3000 at gmail.com> > *Sent:* Tuesday, March 21, 2017 11:43 AM > *To:* HealeyRick > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > Here is a working link to the auction > http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 > > 1967 Austin Healey 3000 MK III - Classic Car Auctions > > www.classiccarauctions.co.uk > Offered for sale is a 3.0L 1967 Austin Healey 3000 MK 3 manual that has > been with the current owner for the last 44 years. Coming with a partial > history file, this ... > > > > Fantastic looking car. > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > >> *When talking British classics, it?s impossible to ignore the likes of >> the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in >> their own right, the *Austin-Healey 3000 Mk III >> >> * is a bit of a specialty. *As compared to Jaguar and Aston Martin, >> which are still with us, the venture created by Austin and Donald Healey >> Motor in 1952 came to a conclusion in 1972. The cutesy Sprite >> is >> a quintessential product of this legendary link-up, albeit the 3000 Mk III >> is the car Austin-Healey enthusiasts consider to be the British outfit?s >> crowning achievement. >> >> 17,712 examples of the Mark III were produced from ?64 to ?67, and this >> here is the last one ever made. Chassis HBJ843025 was manufactured on the >> 21st of December, 1967, and the current owner bought it 45 years ago. Yup, >> this is one cherished example of the 3000 Mk III, a back-to-basics >> sports car >> to >> die for. Better still, it has covered only 57,389 miles (92,358 kilometers) >> over the course of half a century. >> >> *?This is the first time the car has been offered for sale in over 40 >> years and as such an important and iconic British sports car we expect a >> significant amount of interest,?* said Richard Greenhalgh, specialist at Classic >> Car Auctions >> . So what?s >> the estimate on this example of the Big Healey? ?75,000 and ?90,000 is >> CCA?s pre-auction estimate, but only time will tell if bidding will get >> rowdy. >> >> Benefitting from a fresh restoration that finished just a year ago, >> Healey?s last-ever Mk III is joined by a large history file, lots of >> documents, and a heritage certificate. Of course, the inline-six powerplant >> benefits from a high-lift camshaft and SU HS6 carbs, additions that saw >> power go up from 136 to 150 bhp. And compared to the previous iteration, >> the Mk III boasts power-assisted brakes as standard. >> >> Last, but not least, it?s noteworthy to point out that this is no garage >> queen >> . >> And even restored, the final Big Healey doesn?t fail to show its patina. >> >> Source: https://www.autoevolution.com/news/t...on-116318.html >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:21:37 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:21:37 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> It's what I do ") Just really trying get my head around the differences as I have not worked on BJ8s in decades and it came up in a conversation at a meeting Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 10:30 AM, goldengt wrote: > For years and years, I have been told phase 1/2 is all about rear > suspension and nothing to do with lights. Why is the boat being rocked? > Ken Freese > 65 BJ8 > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: i erbs > Date: 3/21/17 8:45 AM (GMT-08:00) > To: BJ8Healeys > Cc: Ahealey help > Subject: Re: [Healeys] MKII, MKIII > > Thanks, > So is that a phase 2 car? If so, what other changes came with the phase 2 > designation? > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > >> As stated before, the light configuration change was based on body number, >> not chassis number. BMIHT data records the change point body number at >> 76138 for the dual lights. The data also says that body number belonged >> to >> both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March >> 1965). >> >> Steve Byers >> HBJ8L/36666 >> BJ8 Registry >> AHCA Delegate at Large >> Havelock, NC >> >> >> >> -----Original Message----- >> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of >> healeymanjim >> Sent: Monday, March 20, 2017 10:38 PM >> To: healeys at autox.team.net >> Subject: [Healeys] MKII, MKIII >> >> lady in our club had a bj8 with dual lights that she bought at the factory >> in june, 1965. no idea of exact changover. >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 13:33:04 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:33:04 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> <004501d2a279$4f4aa440$eddfecc0$@homecall.co.uk> Healey boats? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 12:28 PM, Simon Lachlan < simon.lachlan at homecall.co.uk> wrote: > That?s what boats are for? > > Simon > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > goldengt > *Sent:* 21 March 2017 17:30 > *To:* i erbs ; BJ8Healeys > > *Cc:* Ahealey help > *Subject:* Re: [Healeys] MKII, MKIII > > > > For years and years, I have been told phase 1/2 is all about rear > suspension and nothing to do with lights. Why is the boat being rocked? > > Ken Freese > > 65 BJ8 > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: i erbs > > Date: 3/21/17 8:45 AM (GMT-08:00) > > To: BJ8Healeys > > Cc: Ahealey help > > Subject: Re: [Healeys] MKII, MKIII > > > > Thanks, > > So is that a phase 2 car? If so, what other changes came with the phase 2 > designation? > > > Ira Erbs > > Portland,OR > > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > > BT7 engine and disk brakes > > > > A racing car is an animal with a thousand adjustments. Mario Andretti > > Please excuse random auto corrects and misspelled words > > > > On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: > > As stated before, the light configuration change was based on body number, > not chassis number. BMIHT data records the change point body number at > 76138 for the dual lights. The data also says that body number belonged to > both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March > 1965). > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of > healeymanjim > Sent: Monday, March 20, 2017 10:38 PM > To: healeys at autox.team.net > Subject: [Healeys] MKII, MKIII > > lady in our club had a bj8 with dual lights that she bought at the factory > in june, 1965. no idea of exact changover. > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 13:43:18 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 15:43:18 -0400 Subject: [Healeys] Last Big Healey? References: HBJ8/43025 was NOT the last one ever made. That hono(u)r goes to HBJ8/43026, which was not assembled on the regular production line but in the "Show Shop" three months after regular production ended (it was, and is, Ivory White). 43025 was not even the last car built on the production line (which was 43000, built 23 Nov 67 - 11 Jan 68). 43025 was the last car painted Metallic Golden Beige. Whoever wrote the description below also got the build date for 43025 wrong. It was built (per the BMIHT certificate) 1 - 16 November 1967 and dispatched on 22 November to the Donald Healey Motor Co. Funny that they would get the build date wrong, since they say the certificate is available. 43025 did not leave the factory with HS6 carbs. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC TARHEELY license plate From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Tuesday, March 21, 2017 10:47 AM To: healeys at autox.team.net Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 19755 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From eyera3000 at gmail.com Tue Mar 21 13:48:54 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 12:48:54 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> I love the details. The arcane knowledge on this list is always amazing. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 10:46 AM, Simon Lachlan < simon.lachlan at homecall.co.uk> wrote: > Don't know about the colour but I'd always thought - and my books confirm > - that the last 3000 was a one-off in '68 and that its chassis number was > 43026. > Fair enough...this one is '67 and 43025 so they're really saying that it > was the last one off the regular production line. I'd hesitate to say last > "mass-produced" BJ8! > Such trivia....didn't I see that the original email talked about HS6 carbs? > Simon > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Per > Schoerner > Sent: 21 March 2017 16:01 > To: HealeyRick > Cc: healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > > > 21 mars 2017 kl. 15:47 skrev HealeyRick : > > > > forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html Suggested annual > donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/simon.lachlan at homecall.co.uk > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 14:06:16 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 16:06:16 -0400 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> Because the original question was "When did the dual lights begin"? The definition of Phase 1 and Phase 2 does not depend on light configuration alone; but Phase 2 cars had different light configurations depending on body number -- or depending on the whims at the assembly factory. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: goldengt [mailto:goldengt at cal.net] Sent: Tuesday, March 21, 2017 1:30 PM To: i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked? Ken Freese 65 BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Tue Mar 21 14:18:26 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Tue, 21 Mar 2017 20:18:26 -0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <002d01d2a26b$117b0140$347103c0$@homecall.co.uk> Hardly arcane knowledge. I just refer to reference books, as do most of us. Pretty well all to be bought on eBay or Amazon. Simon From: i erbs [mailto:eyera3000 at gmail.com] Sent: 21 March 2017 19:49 To: Simon Lachlan Cc: Ahealey help Subject: Re: [Healeys] Last Big Healey? I love the details. The arcane knowledge on this list is always amazing. Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words Don't know about the colour but I'd always thought - and my books confirm - that the last 3000 was a one-off in '68 and that its chassis number was 43026. Fair enough...this one is '67 and 43025 so they're really saying that it was the last one off the regular production line. I'd hesitate to say last "mass-produced" BJ8! Such trivia....didn't I see that the original email talked about HS6 carbs? Simon -----Original Message----- Sent: 21 March 2017 16:01 Subject: Re: [Healeys] Last Big Healey? I have always thought the last 3000 was a white car. Per Skickat fr?n min iPad > > forums _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 21 14:35:06 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 21 Mar 2017 13:35:06 -0700 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> I thought the plastic lenses indicated phase 2. the dual front lights was just called late phase 2 or back in the day phase 2+. Do you know of any official nomenclature change for the dual front plastic lens cars? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 1:28 PM, Michael Salter wrote: > Wait, wait, wait...we are all getting confused here!!! > The suspension change was at the transition from the so called Phase I BJ8 > to the Phase II BJ8. > That change which replaced the Panhard Rod rear suspension with the later > radius arm type occurred at (C) 26705. > At the same car (C) number 26705 the side lamp assemblies were changed > from the glass lensed rubber body Lucas Model 594 to the chromed pressed > steel plastic lensed Lucas Model 691/2. > There were various other changes at the same time, cubby box in center > console, pull to push button door handles, ear shocks, larger front brakes > +++. > The introduction of separate side and flasher lamps on the front and > separate stop/tail and flasher at the rear commenced at body number (B) > H-BJ8-76137 and that change is listed in the parts book. No suspension > changes were made at that time. > All the cars with plastic lensed side and tail lights, whether 1 or 2 are > considered to be Phase II. > Michael S > BN1 #174 > > > On Tue, Mar 21, 2017 at 1:30 PM, goldengt wrote: > >> For years and years, I have been told phase 1/2 is all about rear >> suspension and nothing to do with lights. Why is the boat being rocked? >> Ken Freese >> 65 BJ8 >> >> >> >> Sent from my Verizon, Samsung Galaxy smartphone >> >> -------- Original message -------- >> From: i erbs >> Date: 3/21/17 8:45 AM (GMT-08:00) >> To: BJ8Healeys >> Cc: Ahealey help >> Subject: Re: [Healeys] MKII, MKIII >> >> Thanks, >> So is that a phase 2 car? If so, what other changes came with the phase 2 >> designation? >> >> Ira Erbs >> Portland,OR >> _______ _______ >> (______ \____1959 BN4____/ _______) >> (_________________________) >> BT7 engine and disk brakes >> >> A racing car is an animal with a thousand adjustments. Mario Andretti >> Please excuse random auto corrects and misspelled words >> >> On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: >> >>> As stated before, the light configuration change was based on body >>> number, >>> not chassis number. BMIHT data records the change point body number at >>> 76138 for the dual lights. The data also says that body number belonged >>> to >>> both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March >>> 1965). >>> >>> Steve Byers >>> HBJ8L/36666 >>> BJ8 Registry >>> AHCA Delegate at Large >>> Havelock, NC >>> >>> >>> >>> -----Original Message----- >>> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of >>> healeymanjim >>> Sent: Monday, March 20, 2017 10:38 PM >>> To: healeys at autox.team.net >>> Subject: [Healeys] MKII, MKIII >>> >>> lady in our club had a bj8 with dual lights that she bought at the >>> factory >>> in june, 1965. no idea of exact changover. >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: http://autox.team.net/mailman/ >>> options/healeys/eyera3000 at gmail.com >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/michaelsalter at gmail.com >> >> >> > > > -- > *If you can't fix it with a hammer, you've got an electrical problem.* > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 15:56:57 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 17:56:57 -0400 Subject: [Healeys] MKII, MKIII References: <5e2l601h2antorjbq8u27mwu.1490117421993@email.android.com> Rich, the parts manual says the placement of the license plate was below the rear bumper up to body number 79899 for USA and Canadian cars (no chassis recorded in the registry for that body, but body 79898 is chassis 34992). >From body 79900, a bumper-mounted license plate holder was effective. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Richard Kahn [mailto:tahoehealey at hotmail.com] Sent: Tuesday, March 21, 2017 5:28 PM To: goldengt; i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII My phase 1 has the single glass bee-hive lights, the cubby in the center counsel, pan-hard rod across the rear axle and the earlier body height that centers the wheels in the wheel wells. There is a difference in the placement of the license plates on the bumpers. Rich Kahn _____ From: Healeys on behalf of goldengt Sent: Tuesday, March 21, 2017 10:30 AM To: i erbs; BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII For years and years, I have been told phase 1/2 is all about rear suspension and nothing to do with lights. Why is the boat being rocked? Ken Freese 65 BJ8 Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: i erbs Date: 3/21/17 8:45 AM (GMT-08:00) To: BJ8Healeys Cc: Ahealey help Subject: Re: [Healeys] MKII, MKIII Thanks, So is that a phase 2 car? If so, what other changes came with the phase 2 designation? Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 6:14 AM, BJ8Healeys wrote: As stated before, the light configuration change was based on body number, not chassis number. BMIHT data records the change point body number at 76138 for the dual lights. The data also says that body number belonged to both chassis 31259 (built 1 - 2 April 1965) and 31336 (built XX March 1965). Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of healeymanjim Sent: Monday, March 20, 2017 10:38 PM To: healeys at autox.team.net Subject: [Healeys] MKII, MKIII lady in our club had a bj8 with dual lights that she bought at the factory in june, 1965. no idea of exact changover. _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From gbrierton at hotmail.com Tue Mar 21 15:59:11 2017 From: gbrierton at hotmail.com (Gary R. Brierton) Date: Tue, 21 Mar 2017 21:59:11 +0000 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se>, My left hand driver is 40045, built in January, 1967. I owned another BJ8 lefty, # 39981 built. Oct. 30 ? Nov. 2, 1966 Oddly enough, it was not ?Dispatched? ?til 2/67. Built before my current BJ8, but dispatched after. I also find it interesting that I bought these cars almost 20 years apart (#39981 in Feb. 1977, #40045 in Nov. 1996) and the numbers are only 64 digits apart! Trivia for my idle mind.... ________________________________ From: Healeys on behalf of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... > Suggested annual donation $12.75 > Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys Healeys -- Austin Healey Discussion - Team.Net autox.team.net To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ... > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Mail Archives - Team.Net www.team.net Team.Net Archives. Archives listed from most recently updated to oldest updated. Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Healeys -- Austin Healey Discussion - Team.Net autox.team.net To see the collection of prior postings to the list, visit the Healeys Archives. Using Healeys: To post a message to all the list members, send email ... -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Tue Mar 21 16:14:25 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Tue, 21 Mar 2017 18:14:25 -0400 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com From vintage_roadster_restoration at hotmail.com Tue Mar 21 18:33:58 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Wed, 22 Mar 2017 00:33:58 +0000 Subject: [Healeys] Last Big Healey? References: "Fresh from a restoration done a year ago". I guess that the term " restoration" is used pretty loosely here. Perhaps saying that it has been resprayed would have been more accurate but it would not get bidders as enthusiastic to bring it up even to the lowest estimate. I can see keeping the original seats to show that "patina" makes sense but the very least they could have done is install the piping on the aluminum door trim, the rubber bumpers on the front shroud for the bonnet and the rubber seal for the trunk actually installed on the trunk lid. At the same time they could have secured the spare tire at its proper location with the metal bar and leather belt holding it in place. I am quite amazed that they di install the fender flash the correct way. Jean ________________________________ From: Healeys on behalf of HealeyRick Sent: March 21, 2017 2:47 PM To: healeys at autox.team.net Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From kags at shaw.ca Tue Mar 21 18:38:33 2017 From: kags at shaw.ca (Earl Kagna) Date: Tue, 21 Mar 2017 17:38:33 -0700 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> Nope Len. I own 42845, and a good friend close by owns 43014 - both LHD. I know where 43012 is also built and sold LHD, but has been converted to RHD by the current owner. Earl Kagna Victoria, B.C. BJ8, BT7 tri-carb -----Original Message----- From: Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 11:14 AM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/kags at shaw.ca From phoenix722 at comcast.net Tue Mar 21 19:14:42 2017 From: phoenix722 at comcast.net (Mike S) Date: Tue, 21 Mar 2017 18:14:42 -0700 Subject: [Healeys] Car for sale References: Awful. On 3/21/2017 12:12 PM, Richard Ewald wrote: > Some people look at the way things aren't and say why not, other > people look at what those first people did and say WTF? > > http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod-Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr > > There are no words. > Rick > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Tue Mar 21 19:17:07 2017 From: michael.salter at gmail.com (michael.salter at gmail.com) Date: Wed, 22 Mar 2017 01:17:07 +0000 (UTC) Subject: [Healeys] Greg Cory Does anyone have a current email address for Greg Cory, Sprite racer from CA. gregicory at gmail.com doesn't seem to work. Thanks Michael S BN1 #174 . -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 21 20:25:21 2017 From: bspidell at comcast.net (Bob Spidell) Date: Wed, 22 Mar 2017 03:25:21 +0100 (CET) Subject: [Healeys] Dammit! Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA -------------- next part -------------- An HTML attachment was scrubbed... URL: From richard.ewald at gmail.com Tue Mar 21 20:51:13 2017 From: richard.ewald at gmail.com (Richard Ewald) Date: Tue, 21 Mar 2017 19:51:13 -0700 Subject: [Healeys] Car for sale References: <54f7b89b-79fd-072e-6b55-e4d24e2c8454@comcast.net> Ya think? On Tue, Mar 21, 2017 at 6:14 PM, Mike S wrote: > Awful. > > On 3/21/2017 12:12 PM, Richard Ewald wrote: > > Some people look at the way things aren't and say why not, other people > look at what those first people did and say WTF? > > http://www.ebay.com/itm/1962-Austin-Healey-Rat-Rod- > Convertible-/262904542400?hash=item3d3654f4c0:g:ZCoAAOSwax5Y0W6P&vxp=mtr > > There are no words. > Rick > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > > > -- > Mike > > MGTD (long gone) > BN1 (long gone) > BN2-100M (gone but in good hands) > BJ8 > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Wed Mar 22 05:45:19 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Wed, 22 Mar 2017 11:45:19 +0000 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From gilrockwell at gmail.com Wed Mar 22 06:30:23 2017 From: gilrockwell at gmail.com (Gil Rockwell) Date: Wed, 22 Mar 2017 08:30:23 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> WHAT A SHAME! Without him, the show will never be the same?.. This is (or was) the only really worthwhile show to watch, and Edd was the reason. What a bunch of idiots at Velocity! Gil 61 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Tuesday, March 21, 2017 10:25 PM To: healeys Subject: [Healeys] Dammit! Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Wed Mar 22 06:44:33 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Wed, 22 Mar 2017 12:44:33 +0000 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com>, Also got a mail notice that Hemmings Sports and Exotics Magazine is closing its doors. I was an original subscriber and found it to be one of the best in the business. This appears to be a victim of technology. Regards, Richard C One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _____ -------------- next part -------------- An HTML attachment was scrubbed... URL: From wjc3 at citlink.net Wed Mar 22 06:50:34 2017 From: wjc3 at citlink.net (wjc3 at citlink.net) Date: Wed, 22 Mar 2017 12:50:34 +0000 (UTC) Subject: [Healeys] Last Big Healey? References: <25579615.1291862.1490187034562.ref@mail.yahoo.com> Pretty Car. -------------------------------------------- On Tue, 3/21/17, i erbs wrote: Subject: Re: [Healeys] Last Big Healey? To: "HealeyRick" Cc: "healeys at autox.team.net" Date: Tuesday, March 21, 2017, 11:43 AM Here is a working link to the auction http://www.classiccarauctions.co.uk/austin-healey-3000-mk-3 Fantastic looking car. Ira Erbs Portland,OR ? ? ? _______? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? _______ ? ???(______ \____1959 BN4____/ _______) ? ? ? ???(_________________________) ? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 21, 2017 at 7:47 AM, HealeyRick wrote: > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation? $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -----Inline Attachment Follows----- _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation? $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/wjc3 at citlink.net From healeyrik at gmail.com Wed Mar 22 07:42:48 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 22 Mar 2017 09:42:48 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> Double dammit! And the reasons behind his departure stink. The show is too difficult to produce? Amazing how they've managed to do it and do it well all these years. I like that Edd tackles problems that most of us have to deal with. My favorite was putting a new chassis under the Morgan. Rick Neville On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell wrote: > Edd's leaving Wheeler Dealers: > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > -------------------------------- > Bob Spidell - San Jose, CA > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Wed Mar 22 08:12:04 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 22 Mar 2017 07:12:04 -0700 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> So very sorry to read this. Edd And his repairs are the focus of the show. What are they going to focus on now? More Like Brewer yacking on screen? This can't be good. My wife always enjoyed seeing how cars were fixed and Edd is such an easy going guy. Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 22, 2017 3:23 AM, "Bob Spidell" wrote: > Edd's leaving Wheeler Dealers: > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > -------------------------------- > Bob Spidell - San Jose, CA > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jvwojcik at comcast.net Wed Mar 22 08:20:54 2017 From: jvwojcik at comcast.net (Jim Wojcik) Date: Wed, 22 Mar 2017 09:20:54 -0500 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> Agreed. Edd demonstrated what I tried to experience when I pretended to be a mechanic. From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard Collins Sent: Wednesday, March 22, 2017 6:45 AM To: Bob Spidell Cc: healeys Subject: Re: [Healeys] Dammit! One of the best car guy shows on the air. His expertise with M and R and Chemistry with his buddy is what made it special. Regards, Richard C BN7 440 Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From jstmorris at yahoo.com Wed Mar 22 08:43:50 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Wed, 22 Mar 2017 14:43:50 +0000 (UTC) Subject: [Healeys] Healey Blue again References: <001b01d2a18e$76ea72f0$64bf58d0$@homecall.co.uk> <15aee89b41f-59d9-156bb@webstg-m02.mail.aol.com> Good Day Gerry;? The discussion between Rich Chrysler and Peter Svilans back in 2006 may be of interest.? Hope it helps. --Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives Early Colors - To: "Peter Svilans" , - Subject: Re: Early Colors - From: "Rich C" - Date: Thu, 19 Jan 2006 20:57:57 -0500 Peter, and all,?? This is very interesting. I've personally seen a couple of early Hundreds with what was obviously a plain (non metallic) shade of light grayish blue.? In the meantime having been personally involved in the restoration of Blair Harber's? pre-production Hundred (AHX-14) and the first production car BN1L138031, I can attest to the fact that these two cars had what was immediately recognized as metallic Healey Ice Blue.? This tells me that both the non metallic and the normally recognizable metallic versions were produced from the beginning.?? We also know that Jensens (who painted the bodies) were using at least? Dockers and I.C.I. paints early on.? This fact alone would contribute to varying shades of colour.?? As a further point to confuse, my painter has been experimenting with the Healey Blue metallic shades, and recently showed me a sample spray out card, one side sprayed with a formula we've been happily using for a while now, but just the bare paint, the other half of the sample card oversprayed with a thin coating of clear.? It was amazing how much darker the cleared sample was to the eye.?? It was actually hard to imagine it was the same colour!It is for these many varying reasons that when judging a car in Concours, we first let the owner comment on the colour applied if he/she so chooses, and then when evaluating the colour itself, work on the premise of "a reasonable attempt at accuracy" has been displayed.--Rich Chrysler - To: - Subject: Early Colors - From: "Peter Svilans" - Date: Thu, 19 Jan 2006 11:19:50 -0500 Looking through the color chip library at ?www.AutocolorLibrary.com ??brought up this page:http://autocolorlibrary.com/cgi-bin/search/searchpic.pl?1955-ahmg-pg11.jpg? It shows THREE shades of Healey Blue in use as early as 1957.??? One shade ("H-1 Blue Iridescent") is for 1954, one ("Ice Blue Iridescent") is for later 100's to 1957 (the year of the chip card) and a solid, ie: non-metallic, shade ("Ice? Blue") for the earliest 1953-54 Healeys.? There is also Spruce Green, Carmine Red and Ivory.? I have this same R-M card, and the one shade of blue is definitely non-metallic.What is interesting is that these are not modern recreations of old historic colours, but practical chips meant to repaint cars that were then current, ordinary, on-the-road vehicles.? In other words, 'these shades had better be pretty darn close, or we pay to repaint the customer's car again'.Best regards,? --Peter? On Monday, March 20, 2017 11:24 PM, "gablegerry at netscape.net" wrote: Can anyone tell me is the Healey Blue on a BN6 was a solid color or had specs in it?ThanksGerry _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From ggilliam at usol.com Wed Mar 22 09:01:09 2017 From: ggilliam at usol.com (ggilliam at usol.com) Date: Wed, 22 Mar 2017 11:01:09 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> No point in watching the show now.... Another case where the bean counters think they know more than the technical guys, but guess who will get the blame when the ratings fall? Gordy On 2017-03-21 22:25, Bob Spidell wrote: > Edd's leaving Wheeler Dealers: > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 > > -------------------------------- > Bob Spidell - San Jose, CA -------------- next part -------------- An HTML attachment was scrubbed... URL: From ahbn6 at verizon.net Wed Mar 22 09:28:23 2017 From: ahbn6 at verizon.net (John Sims) Date: Wed, 22 Mar 2017 11:28:23 -0400 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> I gave up on the other shows a long time ago. Almost all of them are guys dressed in outlandish garb with tattoos, hairdos, beards, swearing to their help that they are not working hard enough to complete a job with outlandish timelines. The shows are more about them than in the cars. One exception is the girls who have a repair show and they actually show techniques. My other pet peeve is the series Mighty Ships/Mighty Planes and the ilk which skips showing the ships and planes and how they are constructed but zero in on contrived ?problems?. If, for example, they show a B-52 I would rather see the construction process than ?Joe Blow? and his problems in getting a gauge or something to work taking 20 minutes to do it. John Sims Aberdeen, NJ www.healey6.com From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of HealeyRick Sent: Wednesday, March 22, 2017 9:43 AM To: Bob Spidell Cc: healeys Subject: Re: [Healeys] Dammit! Double dammit! And the reasons behind his departure stink. The show is too difficult to produce? Amazing how they've managed to do it and do it well all these years. I like that Edd tackles problems that most of us have to deal with. My favorite was putting a new chassis under the Morgan. Rick Neville On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell wrote: Edd's leaving Wheeler Dealers: http://jalopnik.com/edd-china-is-leaving-wheeler-dealers-because-velocity-w-1793498487 -------------------------------- Bob Spidell - San Jose, CA _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Wed Mar 22 10:17:42 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Wed, 22 Mar 2017 16:17:42 +0000 Subject: [Healeys] Dammit! It is no wonder he quit, whenever they computed their "profit" on their flips the poor guy never got paid anything..... ---- i erbs wrote: > So very sorry to read this. Edd > And his repairs are the focus of the show. What are they going to focus on > now? More Like Brewer yacking on screen? > This can't be good. My wife always enjoyed seeing how cars were fixed and > Edd is such an easy going guy. > Ira Erbs > 1959 100-6 > MKI engine and disc brakes > excuse typos and strange words my phone wants you to see. > Portland,OR > > On Mar 22, 2017 3:23 AM, "Bob Spidell" wrote: > > > Edd's leaving Wheeler Dealers: > > > > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > > because-velocity-w-1793498487 > > > > > > -------------------------------- > > Bob Spidell - San Jose, CA > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > > options/healeys/eyera3000 at gmail.com > > > > > > From eyera3000 at gmail.com Wed Mar 22 14:21:30 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 22 Mar 2017 13:21:30 -0700 Subject: [Healeys] Dammit! References: <1096091415.286205.1490149522394@connect.xfinity.com> <000c01d2a320$f1f54630$d5dfd290$@verizon.net> Bitchen rides is still about the design and the cars and the crew is not screamed at or attacked, but encouraged and light hearted shop games. I'm pretty tired of fake conflcts And timelines. Eds China is a class act. Will miss him and most likely the show too Its almost driving season round these parts. Today I finish 35 radiation treatments for the return of my cancer. Looking forward to good news and the return of my energy. Cheers Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 22, 2017 11:41 AM, "John Sims" wrote: > I gave up on the other shows a long time ago. Almost all of them are guys > dressed in outlandish garb with tattoos, hairdos, beards, swearing to their > help that they are not working hard enough to complete a job with > outlandish timelines. The shows are more about them than in the cars. One > exception is the girls who have a repair show and they actually show > techniques. My other pet peeve is the series Mighty Ships/Mighty Planes and > the ilk which skips showing the ships and planes and how they are > constructed but zero in on contrived ?problems?. If, for example, they show > a B-52 I would rather see the construction process than ?Joe Blow? and his > problems in getting a gauge or something to work taking 20 minutes to do it. > > > > John Sims > > Aberdeen, NJ > > > > www.healey6.com > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > HealeyRick > *Sent:* Wednesday, March 22, 2017 9:43 AM > *To:* Bob Spidell > *Cc:* healeys > *Subject:* Re: [Healeys] Dammit! > > > > Double dammit! And the reasons behind his departure stink. The show is > too difficult to produce? Amazing how they've managed to do it and do it > well all these years. I like that Edd tackles problems that most of us > have to deal with. My favorite was putting a new chassis under the Morgan. > > > > > Rick Neville > > > > On Tue, Mar 21, 2017 at 10:25 PM, Bob Spidell > wrote: > > Edd's leaving Wheeler Dealers: > > > > http://jalopnik.com/edd-china-is-leaving-wheeler-dealers- > because-velocity-w-1793498487 > > > > -------------------------------- > Bob Spidell - San Jose, CA > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dwflagg at juno.com Wed Mar 22 17:54:39 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Wed, 22 Mar 2017 23:54:39 GMT Subject: [Healeys] Last Big Healey? Steve, We can't do any better than you managing the BJ8 Registry!!! Well done!! Cheers, Doug Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ____________________________________________________________ Actress Maggie Q Shocks With Her Solution To Tummy Troubles activatedyou.com http://thirdpartyoffers.juno.com/TGL3141/58d30efde59cfefd2cecst02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From molony at dodo.com.au Wed Mar 22 18:42:53 2017 From: molony at dodo.com.au (Graeme Molony) Date: Thu, 23 Mar 2017 11:42:53 +1100 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <018101d2a290$80cf3820$826da860$@rr.com> Congratulations Steve, Keep up the good work I'm sure all we Bj8 owners appreciate it. I certainly encourage all of the owners down under that I come across to send you their Info if they haven't already done so. Unfortunately they were never for sale originally in Aust and had to be a special order but there have been lots of imports since and there are a reasonable number of cars here now. Patrick might be able to tell you how many as he was keeping a tally of all of the Healey's in Australia at one stage. Afraid I'm one of the guilty ones having stolen a couple from the US over the years Cheers Graeme M -----Original Message----- From: BJ8Healeys Sent: Wednesday, March 22, 2017 9:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au From ahmg at aol.com Wed Mar 22 18:50:31 2017 From: ahmg at aol.com (Ken Fleming) Date: Wed, 22 Mar 2017 20:50:31 -0400 Subject: [Healeys] Last Big Healey? References: <20170322.195439.19719.0@webmail11.dca.untd.com> I agree Doug! Steve your work is greatly appreciated and hopefully more people will share information with you and recognize the service you provide. Congrats on reaching 50%! I am having beer to celebrate in the garage with my BJ8 and she is having a quart of oil.!!!! We both just raised our drinks to you!! Salute!!! Ken Ken Sent from my iPhone > On Mar 22, 2017, at 7:54 PM, "dwflagg at juno.com" wrote: > > Steve, > > We can't do any better than you managing the BJ8 Registry!!! Well done!! > > Cheers, > > Doug > > > Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. > The last by chassis number was 43026. > The last on the production line was 43000. > The last Metallic Golden Beige was 43025. > The last BRG was 43020. > The last Healey Blue was 43021. > The last Healey Blue/Ivory White was 43023. > The last Ivory White was 43026. > The last Colorado Red was 42971. > All cars from 42991 to 43020 were BRG. > The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. > > This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! > > We could do better if more people would submit the details of their car to the registry. > > Steve Byers > HBJ8L/36666 > BJ8 Registry > AHCA Delegate at Large > Havelock, NC > > > > -----Original Message----- > From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett > Sent: Tuesday, March 21, 2017 2:14 PM > To: AH Mail List > Subject: Re: [Healeys] Last Big Healey? > > > The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? > > (The Other) Len > Fairfield, CA, USA > 1967 AH 3000 MkIII, HBJ8L39031 > > > ----- Original Message ----- > From: "Per Schoerner" > To: "HealeyRick" > Cc: > Sent: Tuesday, March 21, 2017 9:01 AM > Subject: Re: [Healeys] Last Big Healey? > > > >I have always thought the last 3000 was a white car. > > > > Per > > > > Skickat fr?n min iPad > > > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : > >> > >> forums > > > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: > > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com > > > > --- > This email has been checked for viruses by AVG. > http://www.avg.com > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/dwflagg at juno.com > > > > ____________________________________________________________ > Actress Maggie Q Shocks With Her Solution To Tummy Troubles > activatedyou.com > http://thirdpartyoffers.juno.com/TGL3142/58d30efde59cfefd2cecst02duc > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ahmg at aol.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kimobriske at gmail.com Wed Mar 22 19:31:09 2017 From: kimobriske at gmail.com (Kimo Briske) Date: Wed, 22 Mar 2017 15:31:09 -1000 Subject: [Healeys] Last Big Healey? References: So how would this car score in Concourse ? With the goal to be as close to original as it left the factory. A fan of originality, Kimo On Tue, Mar 21, 2017 at 2:33 PM, Jean Caron < vintage_roadster_restoration at hotmail.com> wrote: > "Fresh from a restoration done a year ago". I guess that the term " > restoration" is used pretty loosely here. Perhaps saying that it has been > resprayed would have been more accurate but it would not get bidders as > enthusiastic to bring it up even to the lowest estimate. I can see keeping > the original seats to show that "patina" makes sense but the very least > they could have done is install the piping on the aluminum door trim, the > rubber bumpers on the front shroud for the bonnet and the rubber seal for > the trunk actually installed on the trunk lid. At the same time they could > have secured the spare tire at its proper location with the metal bar and > leather belt holding it in place. I am quite amazed that they di install > the fender flash the correct way. > > > Jean > > > ------------------------------ > *From:* Healeys on behalf of HealeyRick < > healeyrik at gmail.com> > *Sent:* March 21, 2017 2:47 PM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Last Big Healey? > > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty. *As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/kimobriske at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Wed Mar 22 19:53:59 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Thu, 23 Mar 2017 01:53:59 +0000 Subject: [Healeys] Last Big Healey? References: , Kimo, While I am no Concours Judge but having built a BJ8 to Concours standards a few years ago as well as having helped a friend bring his car to similar standards, I would say that this car, according to the few photos available from the auction house, would not go beyond the pre-judging phase. There are simply too many details that have been overlooked, things missing, some installed wrong etc. Here are a few examples, the grille surround is not painted where it meets with the back piece, it's left in chrome, the valve cover tags are installed with pop rivets, the rubber bumpers that are installed on the front shroud where it meets with the hood are all missing, the rubber moulding on th front shroud by the carbs is also missing and that is just at the front. Jean ________________________________ From: Kimo Briske Sent: March 23, 2017 1:31 AM To: Jean Caron; Healeys Subject: Re: [Healeys] Last Big Healey? So how would this car score in Concourse ? With the goal to be as close to original as it left the factory. A fan of originality, Kimo "Fresh from a restoration done a year ago". I guess that the term " restoration" is used pretty loosely here. Perhaps saying that it has been resprayed would have been more accurate but it would not get bidders as enthusiastic to bring it up even to the lowest estimate. I can see keeping the original seats to show that "patina" makes sense but the very least they could have done is install the piping on the aluminum door trim, the rubber bumpers on the front shroud for the bonnet and the rubber seal for the trunk actually installed on the trunk lid. At the same time they could have secured the spare tire at its proper location with the metal bar and leather belt holding it in place. I am quite amazed that they di install the fender flash the correct way. Jean ________________________________ Sent: March 21, 2017 2:47 PM Subject: [Healeys] Last Big Healey? When talking British classics, it?s impossible to ignore the likes of the Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their own right, the Austin-Healey 3000 Mk III is a bit of a specialty. As compared to Jaguar and Aston Martin, which are still with us, the venture created by Austin and Donald Healey Motor in 1952 came to a conclusion in 1972. The cutesy Sprite is a quintessential product of this legendary link-up, albeit the 3000 Mk III is the car Austin-Healey enthusiasts consider to be the British outfit?s crowning achievement. 17,712 examples of the Mark III were produced from ?64 to ?67, and this here is the last one ever made. Chassis HBJ843025 was manufactured on the 21st of December, 1967, and the current owner bought it 45 years ago. Yup, this is one cherished example of the 3000 Mk III, a back-to-basics sports car to die for. Better still, it has covered only 57,389 miles (92,358 kilometers) over the course of half a century. ?This is the first time the car has been offered for sale in over 40 years and as such an important and iconic British sports car we expect a significant amount of interest,? said Richard Greenhalgh, specialist at Classic Car Auctions. So what?s the estimate on this example of the Big Healey? ?75,000 and ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding will get rowdy. Benefitting from a fresh restoration that finished just a year ago, Healey?s last-ever Mk III is joined by a large history file, lots of documents, and a heritage certificate. Of course, the inline-six powerplant benefits from a high-lift camshaft and SU HS6 carbs, additions that saw power go up from 136 to 150 bhp. And compared to the previous iteration, the Mk III boasts power-assisted brakes as standard. Last, but not least, it?s noteworthy to point out that this is no garage queen. And even restored, the final Big Healey doesn?t fail to show its patina. Source: https://www.autoevolution.com/news/t...on-116318.html _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From p_cquinn at tpg.com.au Wed Mar 22 23:04:37 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Thu, 23 Mar 2017 16:04:37 +1100 Subject: [Healeys] Last Big Healey? References: <8EF69C1C-50C7-4D66-93F6-4EA1F2287327@schoerner.se> <018101d2a290$80cf3820$826da860$@rr.com> <33586EF20A534FBBBD569D1532295931@msiallinone> Hello Graeme Still keeping the tally. I can tell you that a total of 11 BJ8s were delivered new to Australia and of these one has gone to Japan and ten are still here. A quick look at my records indicate that there are 371 (+ or - some) in Australia now. Hoo Roo Patrick Quinn 1948 Healey Duncan Sports Saloon 1954 Austin-Healey 100 BN3/1 ex-1965 Austin-Healey 3000 BJ8 ex-1966 Austin-Healey 3000 BJ8 -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Graeme Molony Sent: Thursday, 23 March 2017 11:43 AM To: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Congratulations Steve, Keep up the good work I'm sure all we Bj8 owners appreciate it. I certainly encourage all of the owners down under that I come across to send you their Info if they haven't already done so. Unfortunately they were never for sale originally in Aust and had to be a special order but there have been lots of imports since and there are a reasonable number of cars here now. Patrick might be able to tell you how many as he was keeping a tally of all of the Healey's in Australia at one stage. Afraid I'm one of the guilty ones having stolen a couple from the US over the years Cheers Graeme M -----Original Message----- From: BJ8Healeys Sent: Wednesday, March 22, 2017 9:14 AM To: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/sbyers at ec.rr.com --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/molony at dodo.com.au _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From healeyrik at gmail.com Thu Mar 23 05:40:27 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 07:40:27 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: - We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! *NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars were assembled late in 1967 and another car was built from parts by apprentices in March 1968. This car (43025) was registered to the Donald Healey Motor Company and was, non-negotiably, the last Healey 3000 off the production line."* On Tue, Mar 21, 2017 at 3:43 PM, BJ8Healeys wrote: > HBJ8/43025 was NOT the last one ever made. That hono(u)r goes to > HBJ8/43026, which was not assembled on the regular production line but in > the "Show Shop" three months after regular production ended (it was, and > is, Ivory White). 43025 was not even the last car built on the production > line (which was 43000, built 23 Nov 67 - 11 Jan 68). 43025 *was* the > last car painted Metallic Golden Beige. > > Whoever wrote the description below also got the build date for 43025 > wrong. It was built (per the BMIHT certificate) 1 - 16 November 1967 and > dispatched on 22 November to the Donald Healey Motor Co. Funny that they > would get the build date wrong, since they say the certificate is > available. 43025 did not leave the factory with HS6 carbs. > > > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > [image: TARHEELY license plate] > > > > *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of * > HealeyRick > *Sent:* Tuesday, March 21, 2017 10:47 AM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Last Big Healey? > > > > *When talking British classics, it?s impossible to ignore the likes of the > Jaguar E-Type and Aston Martin DB5. But while those are pop icons in their > own right, the *Austin-Healey 3000 Mk III > > * is a bit of a specialty.*As compared to Jaguar and Aston Martin, which > are still with us, the venture created by Austin and Donald Healey Motor in > 1952 came to a conclusion in 1972. The cutesy Sprite > is > a quintessential product of this legendary link-up, albeit the 3000 Mk III > is the car Austin-Healey enthusiasts consider to be the British outfit?s > crowning achievement. > > 17,712 examples of the Mark III were produced from ?64 to ?67, and this > here is the last one ever made. Chassis HBJ843025 was manufactured on the > 21st of December, 1967, and the current owner bought it 45 years ago. Yup, > this is one cherished example of the 3000 Mk III, a back-to-basics sports > car > to > die for. Better still, it has covered only 57,389 miles (92,358 kilometers) > over the course of half a century. > > *?This is the first time the car has been offered for sale in over 40 > years and as such an important and iconic British sports car we expect a > significant amount of interest,?* said Richard Greenhalgh, specialist at Classic > Car Auctions . > So what?s the estimate on this example of the Big Healey? ?75,000 and > ?90,000 is CCA?s pre-auction estimate, but only time will tell if bidding > will get rowdy. > > Benefitting from a fresh restoration that finished just a year ago, > Healey?s last-ever Mk III is joined by a large history file, lots of > documents, and a heritage certificate. Of course, the inline-six powerplant > benefits from a high-lift camshaft and SU HS6 carbs, additions that saw > power go up from 136 to 150 bhp. And compared to the previous iteration, > the Mk III boasts power-assisted brakes as standard. > > Last, but not least, it?s noteworthy to point out that this is no garage > queen > . > And even restored, the final Big Healey doesn?t fail to show its patina. > > Source: https://www.autoevolution.com/news/t...on-116318.html > > > > > [image: Image removed by sender.] > > > Virus-free. www.avg.com > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 19755 bytes Desc: not available URL: From per at schoerner.se Thu Mar 23 06:15:27 2017 From: per at schoerner.se (Per Schoerner) Date: Thu, 23 Mar 2017 13:15:27 +0100 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: > > We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! > > NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Thu Mar 23 06:29:16 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 08:29:16 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Cc: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone 23 mars 2017 kl. 12:40 skrev HealeyRick : The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From josef-eckert at t-online.de Thu Mar 23 07:58:33 2017 From: josef-eckert at t-online.de (josef-eckert at t-online.de) Date: Thu, 23 Mar 2017 14:58:33 +0100 (MET) Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> "Alternative Facts" This is comon these days. You need to accept that. Josef Eckert Konigswinter/Germany -----Original-Nachricht----- Betreff: Re: [Healeys] Last Big Healey? Datum: 2017-03-23T13:35:15+0100 Von: "HealeyRick" An: "BJ8Healeys" The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: * We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars were assembled late in 1967 and another car was built from parts by apprentices in March 1968. This car (43025) was registered to the Donald Healey Motor Company and was, non-negotiably, the last Healey 3000 off the production line." On Tue, Mar 21, 2017 at 3:43 PM, BJ8Healeys From sbyers at ec.rr.com Thu Mar 23 08:15:58 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 10:15:58 -0400 Subject: [Healeys] Last Big Healey? References: <20170322.195439.19719.0@webmail11.dca.untd.com> Many thanks to all of you for the kind words. Building and maintaining the registry and using it for the benefit of the Healey community in general and of BJ8 owners in particular has been fun for me, and has given me plenty to do to keep me out of trouble in retirement. I have received immense satisfaction from the positive benefits and unique service the registry has been able to provide for specific owners over the last 19 years. Although I enter the data and manage the registry, I certainly could never have been able to capture information on 50% of total production by myself. I have been very fortunate to acquire many e-mail friends around the world who believe in the goals of the registry and support it by feeding me information on BJ8s they come across and links to sales on the internet. There are far too many to mention by name, and my sincere thanks and appreciation to all of them, but some stand out and I would like to recognize them especially: - Richard Vaughan, who has spent countless days of his own time researching for me in the BMIHT archives for the last 15 years or so in order to document the original build details of thousands of BJ8s that would otherwise have been unavailable on a mass basis (and free!). - Niels Bengaard for scanning the internet daily for 7 years and sending me links, current and historical, and also for specific information about BJ8s in his part of Scandinavia. - Mell Ward, for sharing her UK 3000 registry with me (BJ8 portion, and minus personal data, of course) - Patrick Quinn for helping me to account for and keep up with all the BJ8s in Australia. - Mark Donaldson for covering the territory in New Zealand. - George and Nathan Bennett for sharing their personal historical databases and keeping me apprised of internet links. - Iain Torrance for making sure that I am aware of BJ8 sales in the UK. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Ken Fleming [mailto:ahmg at aol.com] Sent: Wednesday, March 22, 2017 8:51 PM To: dwflagg at juno.com Cc: sbyers at ec.rr.com; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? I agree Doug! Steve your work is greatly appreciated and hopefully more people will share information with you and recognize the service you provide. Congrats on reaching 50%! I am having beer to celebrate in the garage with my BJ8 and she is having a quart of oil.!!!! We both just raised our drinks to you!! Salute!!! Ken Ken Sent from my iPhone On Mar 22, 2017, at 7:54 PM, "dwflagg at juno.com" wrote: Steve, We can't do any better than you managing the BJ8 Registry!!! Well done!! Cheers, Doug Len, I assume you are talking about Austin-Healeys since "Healey" for some includes the pre-Austin Healey cars. Anyway, the last LHD BJ8 was 43020, recently offered for sale on eBay. I have no information about 39418 in the registry, but what you say is interesting. I'll have to add it to my list for research. The last by chassis number was 43026. The last on the production line was 43000. The last Metallic Golden Beige was 43025. The last BRG was 43020. The last Healey Blue was 43021. The last Healey Blue/Ivory White was 43023. The last Ivory White was 43026. The last Colorado Red was 42971. All cars from 42991 to 43020 were BRG. The car with the latest shipping date from the factory (except for 43026) were actually two: 38734 and 42758, on 19 Feb 68. This seems like a good time to announce that the BJ8 Registry reached a milestone today: we now have data, records, and history for exactly 50% of the total BJ8 production (8,856 of 17,712). Hip, Hip, Hooray! We could do better if more people would submit the details of their car to the registry. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Tuesday, March 21, 2017 2:14 PM To: AH Mail List Subject: Re: [Healeys] Last Big Healey? The notes that I have, source unknown, indicate that the last Healey was 39418. I see that 43025 is right hand drive. Is it possible that 39418 was the last left hand drive Healey? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "Per Schoerner" To: "HealeyRick" Cc: Sent: Tuesday, March 21, 2017 9:01 AM Subject: Re: [Healeys] Last Big Healey? >I have always thought the last 3000 was a white car. > > Per > > Skickat fr?n min iPad > >> 21 mars 2017 kl. 15:47 skrev HealeyRick : >> >> forums > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys --- This email has been checked for viruses by AVG. http://www.avg.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys ____________________________________________________________ Actress Maggie Q Shocks With Her Solution To Tummy Troubles activatedyou.com http://thirdpartyoffers.juno.com/TGL3142/58d30efde59cfefd2cecst02duc Image removed by sender. SponsoredBy Content.Ad _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: ~WRD395.jpg Type: image/jpeg Size: 823 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From healeyrik at gmail.com Thu Mar 23 08:24:38 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 10:24:38 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Steve, Good of you to try and set the record straight. I can't imagine an auction buyer geting what he thinks is "the last one" would be too happy finding out that it isn't. Like the various claims of 100Ms and LeMans cars, I guess it's *caveat emptor.* BTW, did you happen to notice this BJ8 with the "different" engine paint on BaT: http://bringatrailer.com/listing/1967-austin-healey-3000-bj8-mk-iii-2/ Best, Rick On Thu, Mar 23, 2017 at 8:29 AM, BJ8Healeys wrote: > Yes, that much would be correct. However, after the statement quoted > below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone > Auctions preparing catalogue entries and helping to sort out the inevitable > mistakes that occur when a dozen or so people are under pressure to close a > catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 > with a competition history,(which I bought in 1966), so as a 'Marque' > enthusiast, I am as keen as you to ensure that what we commit to paper is > accurate. I have read ------------ response to you and it's patently > completely inaccurate, however, he does not claim to know what he is > talking about, and is too young to remember the ins and outs of the Donald > Healey Motor Company. In fairness, having had a quick look at our vendor's > 'Entry Form' there are a number of claims on there which Richard took at > face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, > but we can change the Website and issue a 'Saleroom Notice' prior to the > auction. > > I propose that I have a good look at the information provided to us by the > vendor and form some opinions. I will share these with you and see what you > think. It's patently obvious that you have considerable knowledge of the > subject and, I guess, we will be guided by you, but as I said, it appears > the vendor is under the impression that what he has told us is correct and > the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he > claimed, then we may have to revise the 'monetary value', which may not go > down too well, but, given your information, we are obliged to correct any > statements we have made and we are keen to ensure a happy purchaser on the > day. > > I will deal with this from now on and if you can give me 24 hours, I will > get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* Per Schoerner [mailto:per at schoerner.se] > *Sent:* Thursday, March 23, 2017 8:15 AM > *Cc:* BJ8Healeys; healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the > production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion > that this was the last one off the line: > > > > ? We don't want to 'labour the point' but this is the LAST big > Healey off the line - ever!!! > > > *NB: We are aware of the three cars assembled after Chassis 43025. When > the production line was stopped, a further two cars * > > > > [image: Image removed by sender.] > > > Virus-free. www.avg.com > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From sbyers at ec.rr.com Thu Mar 23 09:04:58 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 11:04:58 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Rick obviously, the registry data can be beneficial to a potential buyer but possibly not so beneficial to a seller. It is not the intention to favor either one, but having seen a lot of BJ8s offered for sale with some really wild statements, whenever I can offer proof to refute those I will do so. Sometimes owners are happy to learn the truth about their car, and sometimes they don't want to hear it, but it is what it is. I did see the bringatrailer ad for 38307. The color on the valve cover is not exactly "Healey engine green", but close enough to make one wonder whether it is original. It appears to have been painted long ago, but anything could have happened in the last 50 years, including a repaint. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: HealeyRick [mailto:healeyrik at gmail.com] Sent: Thursday, March 23, 2017 10:25 AM To: BJ8Healeys Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Steve, Good of you to try and set the record straight. I can't imagine an auction buyer geting what he thinks is "the last one" would be too happy finding out that it isn't. Like the various claims of 100Ms and LeMans cars, I guess it's caveat emptor. BTW, did you happen to notice this BJ8 with the "different" engine paint on BaT: http://bringatrailer.com/listing/1967-austin-healey-3000-bj8-mk-iii-2/ Best, Rick -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Thu Mar 23 09:07:04 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Thu, 23 Mar 2017 11:07:04 -0400 Subject: [Healeys] FW: Last Big Healey? Sorry, I miss-typed: the car in the ad is 38507. Steve From: BJ8Healeys [mailto:sbyers at ec.rr.com] Sent: Thursday, March 23, 2017 11:05 AM To: 'healeys at autox.team.net' Subject: RE: [Healeys] Last Big Healey? Rick obviously, the registry data can be beneficial to a potential buyer but possibly not so beneficial to a seller. It is not the intention to favor either one, but having seen a lot of BJ8s offered for sale with some really wild statements, whenever I can offer proof to refute those I will do so. Sometimes owners are happy to learn the truth about their car, and sometimes they don't want to hear it, but it is what it is. I did see the bringatrailer ad for 38307. The color on the valve cover is not exactly "Healey engine green", but close enough to make one wonder whether it is original. It appears to have been painted long ago, but anything could have happened in the last 50 years, including a repaint. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Thu Mar 23 09:34:47 2017 From: bspidell at comcast.net (Bob Spidell) Date: Thu, 23 Mar 2017 16:34:47 +0100 (CET) Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA > On March 23, 2017 at 1:29 PM BJ8Healeys wrote: > > > Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. > > I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. > > I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > From: Per Schoerner [mailto:per at schoerner.se] > Sent: Thursday, March 23, 2017 8:15 AM > Cc: BJ8Healeys; healeys at autox.team.net > Subject: Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > > > > > The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: > > > > > > > > ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! > > > > > > NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Thu Mar 23 14:11:34 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 16:11:34 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell wrote: > Am I the only one that thinks this car being 'the last of ... whatever' > adds no particular cachet? I'd rather have a well-preserved, low-mileage > survivor--with rough but original paint--or a top-of-the-line concours > resto, in the middle of the production pack. But, my cars are for driving, > not bragging rights (well, except for the 'M'). > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > > On March 23, 2017 at 1:29 PM BJ8Healeys wrote: > > Yes, that much would be correct. However, after the statement quoted > below, I received this from another source at the auction house: > > -------------------------- > > Steve , Good Afternoon. > > > > My name is ??????---------- and I do quite a lot of work for Silverstone > Auctions preparing catalogue entries and helping to sort out the inevitable > mistakes that occur when a dozen or so people are under pressure to close a > catalogue with 200 cars. > > I am 67 and have owned a number of big Healeys including an early 100/4 > with a competition history,(which I bought in 1966), so as a 'Marque' > enthusiast, I am as keen as you to ensure that what we commit to paper is > accurate. I have read ------------ response to you and it's patently > completely inaccurate, however, he does not claim to know what he is > talking about, and is too young to remember the ins and outs of the Donald > Healey Motor Company. In fairness, having had a quick look at our vendor's > 'Entry Form' there are a number of claims on there which Richard took at > face value but which now may be incorrect. > > The CCA catalogue has now been printed so it's too late to change that, > but we can change the Website and issue a 'Saleroom Notice' prior to the > auction. > > I propose that I have a good look at the information provided to us by the > vendor and form some opinions. I will share these with you and see what you > think. It's patently obvious that you have considerable knowledge of the > subject and, I guess, we will be guided by you, but as I said, it appears > the vendor is under the impression that what he has told us is correct and > the team were excited to be handling a car with such provenance. > > If it appears that the car, although a stunning example, is not what he > claimed, then we may have to revise the 'monetary value', which may not go > down too well, but, given your information, we are obliged to correct any > statements we have made and we are keen to ensure a happy purchaser on the > day. > > I will deal with this from now on and if you can give me 24 hours, I will > get back to you with as much information as I can find at this end. > > > > Thank you for your interest in this matter. > > > > --------------------------------- > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* Per Schoerner [mailto:per at schoerner.se] > *Sent:* Thursday, March 23, 2017 8:15 AM > *Cc:* BJ8Healeys; healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Let's accept then that this is the highest vin number that left the > production line. > > > > Best, Per > > Skickat fr?n min iPhone > > > 23 mars 2017 kl. 12:40 skrev HealeyRick : > > The ad has been updated, but the sellers are sticking to their assertion > that this was the last one off the line: > > > > ? We don't want to 'labour the point' but this is the LAST big > Healey off the line - ever!!! > > > *NB: We are aware of the three cars assembled after Chassis 43025. When > the production line was stopped, a further two cars * > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gonnagitcha90 at hotmail.com Thu Mar 23 14:34:53 2017 From: gonnagitcha90 at hotmail.com (Richard Collins) Date: Thu, 23 Mar 2017 20:34:53 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com>, <1252613880.358563.1490283288193@connect.xfinity.com> I agree 100%. I just hit 90k miles on my BN7 with a red engine block, gold valve cover, red seats with dark brown and black interior, said to be one of the first 10 of BN7 out of the U.K. Everything works, I drive it on the street and occasionally on a track and get great pleasure from it. My 89 turbo Porsche 930 has gotten too valuable to drive in many instances and stays on my lift way too much; not so with my Healey ! Regards, Richard C BN 7 440 Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From thehartnetts at earthlink.net Thu Mar 23 15:09:10 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Thu, 23 Mar 2017 14:09:10 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <031001d2a3e6$d6df2700$849d7500$@rr.com> Re: the bringatrailer ad for 38507. My BJ8, only a relatively few cars later, has flex down-pipes, two mufflers and two resonators across the back with the exhaust coming out on the right (as opposed to 'left', not 'wrong') side. Looking at Moss, it would appear that the installed system is for a BN4 - BJ7. I guess that this was a choice by the PO? What is the switch on the dash next to the glove compartment for? I do not recall ever seeing a similar one. Standard option or something added by the PO? (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 23 16:35:29 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 23 Mar 2017 15:35:29 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> I think a Steve Mcqueen car would be worth more. No one cooler than Mcqueen Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: > Good point, Bob. So many of the things in the car hobby that are supposed > to add value to a car don't make a lot of sense. What makes a car with > "matching numbers" more valuable than one with a replaced engine built to > the same specification? Cars at the beginning or end of production, why > are they more valuable? Cars owned by celebrities, who cares what famous > butt sat in the driver's seat? And of course, no offense, why is a factory > 100M so much more valuable than one fitted with a LeMans kit (can it be the > hi-comp pistons?) As Steve (and the greatest football coach of all time) > say, it is what it is. > > Rick Neville > > On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell > wrote: > >> Am I the only one that thinks this car being 'the last of ... whatever' >> adds no particular cachet? I'd rather have a well-preserved, low-mileage >> survivor--with rough but original paint--or a top-of-the-line concours >> resto, in the middle of the production pack. But, my cars are for driving, >> not bragging rights (well, except for the 'M'). >> >> >> Bob >> >> -------------------------------- >> Bob Spidell - San Jose, CA >> >> On March 23, 2017 at 1:29 PM BJ8Healeys wrote: >> >> Yes, that much would be correct. However, after the statement quoted >> below, I received this from another source at the auction house: >> >> -------------------------- >> >> Steve , Good Afternoon. >> >> >> >> My name is ??????---------- and I do quite a lot of work for Silverstone >> Auctions preparing catalogue entries and helping to sort out the inevitable >> mistakes that occur when a dozen or so people are under pressure to close a >> catalogue with 200 cars. >> >> I am 67 and have owned a number of big Healeys including an early 100/4 >> with a competition history,(which I bought in 1966), so as a 'Marque' >> enthusiast, I am as keen as you to ensure that what we commit to paper is >> accurate. I have read ------------ response to you and it's patently >> completely inaccurate, however, he does not claim to know what he is >> talking about, and is too young to remember the ins and outs of the Donald >> Healey Motor Company. In fairness, having had a quick look at our vendor's >> 'Entry Form' there are a number of claims on there which Richard took at >> face value but which now may be incorrect. >> >> The CCA catalogue has now been printed so it's too late to change that, >> but we can change the Website and issue a 'Saleroom Notice' prior to the >> auction. >> >> I propose that I have a good look at the information provided to us by >> the vendor and form some opinions. I will share these with you and see what >> you think. It's patently obvious that you have considerable knowledge of >> the subject and, I guess, we will be guided by you, but as I said, it >> appears the vendor is under the impression that what he has told us is >> correct and the team were excited to be handling a car with such provenance. >> >> If it appears that the car, although a stunning example, is not what he >> claimed, then we may have to revise the 'monetary value', which may not go >> down too well, but, given your information, we are obliged to correct any >> statements we have made and we are keen to ensure a happy purchaser on the >> day. >> >> I will deal with this from now on and if you can give me 24 hours, I will >> get back to you with as much information as I can find at this end. >> >> >> >> Thank you for your interest in this matter. >> >> >> >> --------------------------------- >> >> Steve Byers >> >> HBJ8L/36666 >> >> BJ8 Registry >> >> AHCA Delegate at Large >> >> Havelock, NC >> >> >> >> >> >> *From:* Per Schoerner [mailto:per at schoerner.se] >> *Sent:* Thursday, March 23, 2017 8:15 AM >> *Cc:* BJ8Healeys; healeys at autox.team.net >> *Subject:* Re: [Healeys] Last Big Healey? >> >> >> >> Let's accept then that this is the highest vin number that left the >> production line. >> >> >> >> Best, Per >> >> Skickat fr?n min iPhone >> >> >> 23 mars 2017 kl. 12:40 skrev HealeyRick : >> >> The ad has been updated, but the sellers are sticking to their assertion >> that this was the last one off the line: >> >> >> >> ? We don't want to 'labour the point' but this is the LAST big >> Healey off the line - ever!!! >> >> >> *NB: We are aware of the three cars assembled after Chassis 43025. When >> the production line was stopped, a further two cars * >> >> >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/healeyrik at gmail.com >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 23 16:36:22 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 23 Mar 2017 15:36:22 -0700 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> and of course a Donald Healey owned car would be worth more Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 3:35 PM, i erbs wrote: > I think a Steve Mcqueen car would be worth more. > No one cooler than Mcqueen > > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: > >> Good point, Bob. So many of the things in the car hobby that are >> supposed to add value to a car don't make a lot of sense. What makes a car >> with "matching numbers" more valuable than one with a replaced engine built >> to the same specification? Cars at the beginning or end of production, why >> are they more valuable? Cars owned by celebrities, who cares what famous >> butt sat in the driver's seat? And of course, no offense, why is a factory >> 100M so much more valuable than one fitted with a LeMans kit (can it be the >> hi-comp pistons?) As Steve (and the greatest football coach of all time) >> say, it is what it is. >> >> Rick Neville >> >> On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell >> wrote: >> >>> Am I the only one that thinks this car being 'the last of ... whatever' >>> adds no particular cachet? I'd rather have a well-preserved, low-mileage >>> survivor--with rough but original paint--or a top-of-the-line concours >>> resto, in the middle of the production pack. But, my cars are for driving, >>> not bragging rights (well, except for the 'M'). >>> >>> >>> Bob >>> >>> -------------------------------- >>> Bob Spidell - San Jose, CA >>> >>> On March 23, 2017 at 1:29 PM BJ8Healeys wrote: >>> >>> Yes, that much would be correct. However, after the statement quoted >>> below, I received this from another source at the auction house: >>> >>> -------------------------- >>> >>> Steve , Good Afternoon. >>> >>> >>> >>> My name is ??????---------- and I do quite a lot of work for Silverstone >>> Auctions preparing catalogue entries and helping to sort out the inevitable >>> mistakes that occur when a dozen or so people are under pressure to close a >>> catalogue with 200 cars. >>> >>> I am 67 and have owned a number of big Healeys including an early 100/4 >>> with a competition history,(which I bought in 1966), so as a 'Marque' >>> enthusiast, I am as keen as you to ensure that what we commit to paper is >>> accurate. I have read ------------ response to you and it's patently >>> completely inaccurate, however, he does not claim to know what he is >>> talking about, and is too young to remember the ins and outs of the Donald >>> Healey Motor Company. In fairness, having had a quick look at our vendor's >>> 'Entry Form' there are a number of claims on there which Richard took at >>> face value but which now may be incorrect. >>> >>> The CCA catalogue has now been printed so it's too late to change that, >>> but we can change the Website and issue a 'Saleroom Notice' prior to the >>> auction. >>> >>> I propose that I have a good look at the information provided to us by >>> the vendor and form some opinions. I will share these with you and see what >>> you think. It's patently obvious that you have considerable knowledge of >>> the subject and, I guess, we will be guided by you, but as I said, it >>> appears the vendor is under the impression that what he has told us is >>> correct and the team were excited to be handling a car with such provenance. >>> >>> If it appears that the car, although a stunning example, is not what he >>> claimed, then we may have to revise the 'monetary value', which may not go >>> down too well, but, given your information, we are obliged to correct any >>> statements we have made and we are keen to ensure a happy purchaser on the >>> day. >>> >>> I will deal with this from now on and if you can give me 24 hours, I >>> will get back to you with as much information as I can find at this end. >>> >>> >>> >>> Thank you for your interest in this matter. >>> >>> >>> >>> --------------------------------- >>> >>> Steve Byers >>> >>> HBJ8L/36666 >>> >>> BJ8 Registry >>> >>> AHCA Delegate at Large >>> >>> Havelock, NC >>> >>> >>> >>> >>> >>> *From:* Per Schoerner [mailto:per at schoerner.se] >>> *Sent:* Thursday, March 23, 2017 8:15 AM >>> *Cc:* BJ8Healeys; healeys at autox.team.net >>> *Subject:* Re: [Healeys] Last Big Healey? >>> >>> >>> >>> Let's accept then that this is the highest vin number that left the >>> production line. >>> >>> >>> >>> Best, Per >>> >>> Skickat fr?n min iPhone >>> >>> >>> 23 mars 2017 kl. 12:40 skrev HealeyRick : >>> >>> The ad has been updated, but the sellers are sticking to their assertion >>> that this was the last one off the line: >>> >>> >>> >>> ? We don't want to 'labour the point' but this is the LAST big >>> Healey off the line - ever!!! >>> >>> >>> *NB: We are aware of the three cars assembled after Chassis 43025. When >>> the production line was stopped, a further two cars * >>> >>> >>> >>> >>> _______________________________________________ >>> Support Team.Net http://www.team.net/donate.html >>> Suggested annual donation $12.75 >>> Archive: http://www.team.net/archive >>> Forums: http://www.team.net/forums >>> >>> Healeys at autox.team.net >>> http://autox.team.net/mailman/listinfo/healeys >>> >>> Unsubscribe/Manage: http://autox.team.net/mailman/ >>> options/healeys/healeyrik at gmail.com >>> >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/eyera3000 at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Thu Mar 23 17:50:57 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Thu, 23 Mar 2017 23:50:57 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com>, I am of the opinion that all these items like matching numbers, first off the line, last one built etc. are nothing but auction lexicon to try to get more money for a car they have on consignment and therefore make more money for the sometimes 5 minutes they spend selling a particular vehicle. There is little doubt, getting a catalogue ready for a sale is no small task, then getting the car at the site, the paperwork afterwards etc, it all cost something but since most well know auction house get 10% from the seller and the buyer, there is a lot of money at stake for them and the few key words they can add to attract a buyer, they'll do it to create a market. Jean ________________________________ From: Healeys on behalf of HealeyRick Sent: March 23, 2017 8:11 PM To: Bob Spidell Cc: healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob -------------------------------- Bob Spidell - San Jose, CA Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house: -------------------------- Steve , Good Afternoon. My name is ??????---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars. I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect. The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction. I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance. If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day. I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. --------------------------------- Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC Sent: Thursday, March 23, 2017 8:15 AM Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: * We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From amalin at mac.com Thu Mar 23 18:26:09 2017 From: amalin at mac.com (Al Malin) Date: Thu, 23 Mar 2017 20:26:09 -0400 Subject: [Healeys] Toe-in For a Tricarb the manual calls for 1/16 inch to 1/8 inch toe-in. Do these values change for radial tires? Al Malin Tricarb From dwflagg at juno.com Thu Mar 23 18:54:22 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Fri, 24 Mar 2017 00:54:22 GMT Subject: [Healeys] Last Big Healey? Especially the chase scene from "Bullit"!! I think a Steve Mcqueen car would be worth more.No one cooler than Mcqueen Ira ErbsPortland,OR _______ _______ (______ \\____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario AndrettiPlease excuse random auto corrects and misspelled words On Thu, Mar 23, 2017 at 1:11 PM, HealeyRick wrote: Good point, Bob. So many of the things in the car hobby that are supposed to add value to a car don't make a lot of sense. What makes a car with "matching numbers" more valuable than one with a replaced engine built to the same specification? Cars at the beginning or end of production, why are they more valuable? Cars owned by celebrities, who cares what famous butt sat in the driver's seat? And of course, no offense, why is a factory 100M so much more valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As Steve (and the greatest football coach of all time) say, it is what it is. Rick Neville On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell wrote: Am I the only one that thinks this car being 'the last of ... whatever' adds no particular cachet? I'd rather have a well-preserved, low-mileage survivor--with rough but original paint--or a top-of-the-line concours resto, in the middle of the production pack. But, my cars are for driving, not bragging rights (well, except for the 'M'). Bob-------------------------------- Bob Spidell - San Jose, CAOn March 23, 2017 at 1:29 PM BJ8Healeys wrote: Yes, that much would be correct. However, after the statement quoted below, I received this from another source at the auction house:--------------------------Steve , Good Afternoon. My name is ­­­­­­---------- and I do quite a lot of work for Silverstone Auctions preparing catalogue entries and helping to sort out the inevitable mistakes that occur when a dozen or so people are under pressure to close a catalogue with 200 cars.I am 67 and have owned a number of big Healeys including an early 100/4 with a competition history,(which I bought in 1966), so as a 'Marque' enthusiast, I am as keen as you to ensure that what we commit to paper is accurate. I have read ------------ response to you and it's patently completely inaccurate, however, he does not claim to know what he is talking about, and is too young to remember the ins and outs of the Donald Healey Motor Company. In fairness, having had a quick look at our vendor's 'Entry Form' there are a number of claims on there which Richard took at face value but which now may be incorrect.The CCA catalogue has now been printed so it's too late to change that, but we can change the Website and issue a 'Saleroom Notice' prior to the auction.I propose that I have a good look at the information provided to us by the vendor and form some opinions. I will share these with you and see what you think. It's patently obvious that you have considerable knowledge of the subject and, I guess, we will be guided by you, but as I said, it appears the vendor is under the impression that what he has told us is correct and the team were excited to be handling a car with such provenance.If it appears that the car, although a stunning example, is not what he claimed, then we may have to revise the 'monetary value', which may not go down too well, but, given your information, we are obliged to correct any statements we have made and we are keen to ensure a happy purchaser on the day.I will deal with this from now on and if you can give me 24 hours, I will get back to you with as much information as I can find at this end. Thank you for your interest in this matter. ---------------------------------Steve ByersHBJ8L/36666BJ8 RegistryAHCA Delegate at LargeHavelock, NC From: Per Schoerner [mailto:per at schoerner.se] Sent: Thursday, March 23, 2017 8:15 AM Cc: BJ8Healeys; healeys at autox.team.net Subject: Re: [Healeys] Last Big Healey? Let's accept then that this is the highest vin number that left the production line. Best, Per Skickat fr?n min iPhone 23 mars 2017 kl. 12:40 skrev HealeyRick :The ad has been updated, but the sellers are sticking to their assertion that this was the last one off the line: ? We don't want to 'labour the point' but this is the LAST big Healey off the line - ever!!! NB: We are aware of the three cars assembled after Chassis 43025. When the production line was stopped, a further two cars _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyrik at gmail.com _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com ____________________________________________________________ Cameraman For Sure Got Fired Over This! [23 Photos] buzzcelebrities.com http://thirdpartyoffers.juno.com/TGL3141/58d46e9d81d836e9d619fst02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Thu Mar 23 20:45:31 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 23 Mar 2017 22:45:31 -0400 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <031001d2a3e6$d6df2700$849d7500$@rr.com> And now the ad has been changed again to "This is one of the LAST!! Healey 3000s off the Austin-Healey production line (December 1967)" and "The last 3000 ever to be finished in Golden Beige Metallic" Rick Neville On Thu, Mar 23, 2017 at 11:04 AM, BJ8Healeys wrote: > Rick obviously, the registry data can be beneficial to a potential buyer > but possibly not so beneficial to a seller. It is not the intention to > favor either one, but having seen a lot of BJ8s offered for sale with some > really wild statements, whenever I can offer proof to refute those I will > do so. Sometimes owners are happy to learn the truth about their car, and > sometimes they don't want to hear it, but it is what it is. > > > > I did see the bringatrailer ad for 38307. The color on the valve cover is > not exactly "Healey engine green", but close enough to make one wonder > whether it is original. It appears to have been painted long ago, but > anything could have happened in the last 50 years, including a repaint. > > > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > > > > > *From:* HealeyRick [mailto:healeyrik at gmail.com] > *Sent:* Thursday, March 23, 2017 10:25 AM > *To:* BJ8Healeys > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > > > Steve, > > > > Good of you to try and set the record straight. I can't imagine an > auction buyer geting what he thinks is "the last one" would be too happy > finding out that it isn't. Like the various claims of 100Ms and LeMans > cars, I guess it's *caveat emptor.* > > > > BTW, did you happen to notice this BJ8 with the "different" engine paint > on BaT: http://bringatrailer.com/listing/1967-austin-healey- > 3000-bj8-mk-iii-2/ > > > > Best, > > Rick > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kentmclean at comcast.net Fri Mar 24 06:19:36 2017 From: kentmclean at comcast.net (Kent McLean) Date: Fri, 24 Mar 2017 08:19:36 -0400 Subject: [Healeys] Dammit! References: Ira Erbs wrote: > Today I finish 35 radiation > treatments for the return of my cancer. Looking forward to good news and > the return of my energy. There are worse things than Edd China leaving a great show. May your doctors succeed in giving you the ?Edd China? treatment, bringing a sick old body back to new. - Kent McLean ?56 100 BN2 From pdzwig at summaventures.com Fri Mar 24 06:47:24 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Fri, 24 Mar 2017 12:47:24 +0000 Subject: [Healeys] Last Big Healey? References: <013401d2a27b$6424dbe0$2c6e93a0$@rr.com> <3DDFB078-9A55-41BA-8192-9057F47C3079@schoerner.se> <02c501d2a3d1$16ecb670$44c62350$@rr.com> <1252613880.358563.1490283288193@connect.xfinity.com> While originality has a value, it is all in the eye of the beholder. If a car belonged to, say, Steve McQueen and you have all the documentation going back to when it was sold to him then it has provenance and provably so: what you are prepared to pay for that is up to you. Previous ownership depends on your taste, after all Hitler's Mercedes found a buyer. I wouldn't want it. Consider race cars and rally Healeys which command probably the highest premiums of all. Most cars were modified or rebuilt after each event and throughout the period in which they were campaigned in line with changing technologies and in some cases rules. As a result they have very few bits that were in place when they rolled off the production line. Yes the parts were fitted by a BL engineer/technician but everyone on this list knows what that can mean! That doesn't prevent them from being "authentic". Such a car cannot be considered to be "original" in that it doesn't have the same components with which it left the factory. A very interesting case concerns the Bentley widely known as "Old Number One" in which the originality and "genuineness" of the car and its value were in dispute and which ended up in a twelve-day trial. The judgement is here: http://www.gomog.com/articles/no1judgement.html As far as I am aware it hasn't been superceded in English Law. It's probably also in several other places too. It's very interesting and well worth a read. Peter On 23/03/2017 23:50, Jean Caron wrote: > I am of the opinion that all these items like matching numbers, first off the > line, last one built etc. are nothing but auction lexicon to try to get more > money for a car they have on consignment and therefore make more money for the > sometimes 5 minutes they spend selling a particular vehicle. > > There is little doubt, getting a catalogue ready for a sale is no small task, > then getting the car at the site, the paperwork afterwards etc, it all cost > something but since most well know auction house get 10% from the seller and the > buyer, there is a lot of money at stake for them and the few key words they can > add to attract a buyer, they'll do it to create a market. > > > Jean > > > > -------------------------------------------------------------------------------- > *From:* Healeys on behalf of HealeyRick > > *Sent:* March 23, 2017 8:11 PM > *To:* Bob Spidell > *Cc:* healeys at autox.team.net > *Subject:* Re: [Healeys] Last Big Healey? > > Good point, Bob. So many of the things in the car hobby that are supposed to > add value to a car don't make a lot of sense. What makes a car with "matching > numbers" more valuable than one with a replaced engine built to the same > specification? Cars at the beginning or end of production, why are they more > valuable? Cars owned by celebrities, who cares what famous butt sat in the > driver's seat? And of course, no offense, why is a factory 100M so much more > valuable than one fitted with a LeMans kit (can it be the hi-comp pistons?) As > Steve (and the greatest football coach of all time) say, it is what it is. > > Rick Neville > > On Thu, Mar 23, 2017 at 11:34 AM, Bob Spidell > __ > > Am I the only one that thinks this car being 'the last of ... whatever' adds > no particular cachet? I'd rather have a well-preserved, low-mileage > survivor--with rough but original paint--or a top-of-the-line concours > resto, in the middle of the production pack. But, my cars are for driving, > not bragging rights (well, except for the 'M'). > > > Bob > > -------------------------------- > Bob Spidell - San Jose, CA > >> On March 23, 2017 at 1:29 PM BJ8Healeys > >> Yes, that much would be correct. However, after the statement quoted >> below, I received this from another source at the auction house: >> >> -------------------------- >> >> Steve , Good Afternoon. >> >> >> >> My name is ??????---------- and I do quite a lot of work for Silverstone >> Auctions preparing catalogue entries and helping to sort out the >> inevitable mistakes that occur when a dozen or so people are under >> pressure to close a catalogue with 200 cars. >> >> I am 67 and have owned a number of big Healeys including an early 100/4 >> with a competition history,(which I bought in 1966), so as a 'Marque' >> enthusiast, I am as keen as you to ensure that what we commit to paper is >> accurate. I have read ------------ response to you and it's patently >> completely inaccurate, however, he does not claim to know what he is >> talking about, and is too young to remember the ins and outs of the Donald >> Healey Motor Company. In fairness, having had a quick look at our vendor's >> 'Entry Form' there are a number of claims on there which Richard took at >> face value but which now may be incorrect. >> >> The CCA catalogue has now been printed so it's too late to change that, >> but we can change the Website and issue a 'Saleroom Notice' prior to the >> auction. >> >> I propose that I have a good look at the information provided to us by the >> vendor and form some opinions. I will share these with you and see what >> you think. It's patently obvious that you have considerable knowledge of >> the subject and, I guess, we will be guided by you, but as I said, it >> appears the vendor is under the impression that what he has told us is >> correct and the team were excited to be handling a car with such provenance. >> >> If it appears that the car, although a stunning example, is not what he >> claimed, then we may have to revise the 'monetary value', which may not go >> down too well, but, given your information, we are obliged to correct any >> statements we have made and we are keen to ensure a happy purchaser on the >> day. >> >> I will deal with this from now on and if you can give me 24 hours, I will >> get back to you with as much information as I can find at this end. >> >> >> >> Thank you for your interest in this matter. >> >> >> >> --------------------------------- >> >> Steve Byers >> >> HBJ8L/36666 >> >> BJ8 Registry >> >> AHCA Delegate at Large >> >> Havelock, NC >> >> >> >> >> >> *Sent:* Thursday, March 23, 2017 8:15 AM >> *Subject:* Re: [Healeys] Last Big Healey? >> >> >> >> Let's accept then that this is the highest vin number that left the >> production line. >> >> >> >> Best, Per >> >> Skickat fr?n min iPhone >> >> >> 23 mars 2017 kl. 12:40 skrev HealeyRick > >> The ad has been updated, but the sellers are sticking to their >> assertion that this was the last one off the line: >> >> >> >> ? We don't want to 'labour the point' but this is the LAST big >> Healey off the line - ever!!! >> >> >> /NB: We are aware of the three cars assembled after Chassis 43025. >> When the production line was stopped, a further two cars / >> >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/healeyrik at gmail.com > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/pdzwig at summaventures.com > -- =========================================================== Dr Peter Dzwig From eyera3000 at gmail.com Fri Mar 24 09:46:01 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 08:46:01 -0700 Subject: [Healeys] Dammit! References: lovely. well played. appreciate the good wishes Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 24, 2017 at 5:19 AM, Kent McLean wrote: > Ira Erbs wrote: > > Today I finish 35 radiation > > treatments for the return of my cancer. Looking forward to good news and > > the return of my energy. > > There are worse things than Edd China leaving a great show. May your > doctors succeed in giving you the ?Edd China? treatment, bringing a sick > old body back to new. > > - > Kent McLean > ?56 100 BN2 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Fri Mar 24 10:27:42 2017 From: goldengt at cal.net (goldengt) Date: Fri, 24 Mar 2017 09:27:42 -0700 Subject: [Healeys] Road spring tool Anyone found a reasonably priced tool similar to the factory one for compressing the front springs? I/we am getting better with 4 theaded rods, but still would like to buy a new tool.?Ken Freese?65 single plastic light phase 2 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Fri Mar 24 10:27:42 2017 From: goldengt at cal.net (goldengt) Date: Fri, 24 Mar 2017 09:27:42 -0700 Subject: [Healeys] Road spring tool Anyone found a reasonably priced tool similar to the factory one for compressing the front springs? I/we am getting better with 4 theaded rods, but still would like to buy a new tool.?Ken Freese?65 single plastic light phase 2 Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From rchaskell at earthlink.net Fri Mar 24 12:42:37 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Fri, 24 Mar 2017 14:42:37 -0400 Subject: [Healeys] Road spring tool References: Ken, I've always used just two threaded rods, placed diagonally. For one set, I pinned a nut on one end of each rods. I've not run across the factory tool, Churchill 18G37. Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/24/2017 12:27 PM, goldengt wrote: > Anyone found a reasonably priced tool similar to the factory one for > compressing the front springs? I/we am getting better with 4 theaded > rods, but still would like to buy a new tool. > Ken Freese > 65 single plastic light phase 2 > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From eyera3000 at gmail.com Fri Mar 24 12:48:23 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 11:48:23 -0700 Subject: [Healeys] Moment Anderson book on ebay currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg&vxp=mtr Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: From rrengineer.mike at att.net Fri Mar 24 15:18:31 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Fri, 24 Mar 2017 21:18:31 +0000 (UTC) Subject: [Healeys] Moment Anderson book on ebay References: Never mind that.? Look at the other one at the middle of the page for a buy it now of $420.00!Mike MacLean On Friday, March 24, 2017 1:22 PM, i erbs wrote: currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg&vxp=mtr ? Ira ErbsPortland,OR? ? ? _______ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?_______ ? ?? (______ \____1959 BN4____/ _______) ? ? ? ?? (_________________________)? ? ? ? ? BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words_______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Fri Mar 24 15:31:56 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 24 Mar 2017 14:31:56 -0700 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> I posted it because of the absurd prices and thought if someone really needed a copy here was one that was just expensive at $195.00 Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 24, 2017 at 2:18 PM, Michael MacLean wrote: > Never mind that. Look at the other one at the middle of the page for a > buy it now of $420.00! > Mike MacLean > > > On Friday, March 24, 2017 1:22 PM, i erbs wrote: > > > currently at $195.00 > > http://www.ebay.com/itm/Austin-Healey-RESTORATION- > GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g: > DyAAAOSwtfhYn5Fg&vxp=mtr > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/rrengineer.mike at att.net > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Fri Mar 24 20:40:27 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Fri, 24 Mar 2017 22:40:27 -0400 Subject: [Healeys] Phenolic spacers I am reinstalling the H6 carbs after rebuilding them and I hope to wrap up everything tomorrow. The Moss kit came with two phenolic spacers about 3/8" thick that mount to the outer face of the carburetor bodies, assumedly between the face and the air cleaners. My car is a Le Mans and cold air box was mounted directly to the carbs without any blocks. Using them would make it just that much more difficult to get the cold air box and the hose and hose adaptor in place. It would also result in the fuel bowl overflow tubes not reaching the grommeted holes in the box. What function do the blocks serve, are they normally found when CAB's are mounted (as opposed to air cleaners) and if so what harm might be caused by not using them? -------------- next part -------------- An HTML attachment was scrubbed... URL: From gturl at sympatico.ca Fri Mar 24 21:55:24 2017 From: gturl at sympatico.ca (gturl gturl) Date: Fri, 24 Mar 2017 23:55:24 -0400 (EDT) Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Sat Mar 25 01:08:16 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 00:08:16 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> Shouldn?t be. It?s not like you are torqueing the head. John Spaur ?62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of gturl gturl Sent: Friday, March 24, 2017 8:55 PM To: healeys at autox.team.net Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine Is there a preferred sequence for tightening the bolts holding the rocker shaft pedestals to the head? Thanks in advance.. Geoff Turl -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Sat Mar 25 01:24:47 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 00:24:47 -0700 Subject: [Healeys] Road spring tool References: <58D5689D.1070700@earthlink.net> Tried and true method. Used it many times over the years. John Spaur -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Haskell Sent: Friday, March 24, 2017 11:43 AM To: goldengt ; Austin Healey List Subject: Re: [Healeys] Road spring tool Ken, I've always used just two threaded rods, placed diagonally. For one set, I pinned a nut on one end of each rods. I've not run across the factory tool, Churchill 18G37. Cheers, Bob Haskell From rchaskell at earthlink.net Sat Mar 25 05:48:07 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Sat, 25 Mar 2017 07:48:07 -0400 Subject: [Healeys] Phenolic spacers References: Michael, The the phenolic spacers are insulators. On other cars they would be installed between the manifold and the heat shield and/or the heat shield and the carbs. But these match the CAB side of the carb body, not the manifold side? Interesting. Not much help, sorry. Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/24/2017 10:40 PM, Michael Oritt wrote: > I am reinstalling the H6 carbs after rebuilding them and I hope to wrap > up everything tomorrow. The Moss kit came with two phenolic spacers > about 3/8" thick that mount to the outer face of the carburetor bodies, > assumedly between the face and the air cleaners. > > My car is a Le Mans and cold air box was mounted directly to the carbs > without any blocks. Using them would make it just that much more > difficult to get the cold air box and the hose and hose adaptor in > place. It would also result in the fuel bowl overflow tubes not reaching > the grommeted holes in the box. > > What function do the blocks serve, are they normally found when CAB's > are mounted (as opposed to air cleaners) and if so what harm might be > caused by not using them? > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From michael.oritt at gmail.com Sat Mar 25 08:00:49 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 10:00:49 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> Bob-- To clarify, the kit came with four phenolic blocks or spacers. Two are square with scalloped sides and four holes and mount between the carbs and the intake manifold face. Two more are diamond shaped with two holes each to accept bolts to mount either air cleaners or a CAB. I assume they would provide some insulating value to minimize heat transfer from the carb body to the filter or CAB but I really cannot see that this would have any effect on the temperature of inlet air. Best--Michael Oritt On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell wrote: > Michael, > > The the phenolic spacers are insulators. On other cars they would be > installed between the manifold and the heat shield and/or the heat shield > and the carbs. > > But these match the CAB side of the carb body, not the manifold side? > Interesting. > > Not much help, sorry. > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > >> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >> up everything tomorrow. The Moss kit came with two phenolic spacers >> about 3/8" thick that mount to the outer face of the carburetor bodies, >> assumedly between the face and the air cleaners. >> >> My car is a Le Mans and cold air box was mounted directly to the carbs >> without any blocks. Using them would make it just that much more >> difficult to get the cold air box and the hose and hose adaptor in >> place. It would also result in the fuel bowl overflow tubes not reaching >> the grommeted holes in the box. >> >> What function do the blocks serve, are they normally found when CAB's >> are mounted (as opposed to air cleaners) and if so what harm might be >> caused by not using them? >> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/rchaskell at earthlink.net >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 09:59:06 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 08:59:06 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> Absent a specific sequence, I always torque from the middle out, alternating sides. Bob ps. They're studs--unless someone has changed yours--so you're torquing nuts. On 3/25/2017 12:08 AM, John Spaur wrote: > > Shouldn?t be. It?s not like you are torqueing the head. > > John Spaur > > ?62 BT7 > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *gturl gturl > *Sent:* Friday, March 24, 2017 8:55 PM > *To:* healeys at autox.team.net > *Subject:* [Healeys] Rocker Shaft Installation, 6 cyl engine > > Is there a preferred sequence for tightening the bolts holding the > rocker shaft pedestals to the head? > > Thanks in advance.. > > Geoff Turl > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 10:03:10 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 09:03:10 -0700 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> And, the CABs are a PITA to remove and attach WITHOUT any more spacers (probably why so many original ones are missing). We got a repop for our M, but I'm considering installing some other type of filter for normal, 'daily' use. Bob On 3/25/2017 7:00 AM, Michael Oritt wrote: > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between > the carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to > mount either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat > transfer from the carb body to the filter or CAB but I really cannot > see that this would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > Michael, > > The the phenolic spacers are insulators. On other cars they would > be installed between the manifold and the heat shield and/or the > heat shield and the carbs. > > But these match the CAB side of the carb body, not the manifold > side? Interesting. > > Not much help, sorry. > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > I am reinstalling the H6 carbs after rebuilding them and I > hope to wrap > up everything tomorrow. The Moss kit came with two phenolic > spacers > about 3/8" thick that mount to the outer face of the > carburetor bodies, > assumedly between the face and the air cleaners. > > My car is a Le Mans and cold air box was mounted directly to > the carbs > without any blocks. Using them would make it just that much more > difficult to get the cold air box and the hose and hose adaptor in > place. It would also result in the fuel bowl overflow tubes > not reaching > the grommeted holes in the box. > > What function do the blocks serve, are they normally found > when CAB's > are mounted (as opposed to air cleaners) and if so what harm > might be > caused by not using them? > > > _______________________________________________ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Sat Mar 25 10:56:49 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 12:56:49 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> Bob-- After further consideration--as well as impatience and laziness--I decided to skip the spacers. As you say, fitting the CAB is difficult enough without pushing everything further out under the shroud. Just took car for a shakedown and all seems good. In the process of removing, rebuilding and refitting the carbs I also managed to lose an annoying rattle that would only appear under acceleration between 3000 and 3500 rpms. It has been there for about five years and no matter what I did I could not find its source. Good riddance! Best--Michael Oritt On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell wrote: > And, the CABs are a PITA to remove and attach WITHOUT any more spacers > (probably why so many original ones are missing). We got a repop for our > M, but I'm considering installing some other type of filter for normal, > 'daily' use. > > Bob > > On 3/25/2017 7:00 AM, Michael Oritt wrote: > > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between the > carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to mount > either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat > transfer from the carb body to the filter or CAB but I really cannot see > that this would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > wrote: > >> Michael, >> >> The the phenolic spacers are insulators. On other cars they would be >> installed between the manifold and the heat shield and/or the heat shield >> and the carbs. >> >> But these match the CAB side of the carb body, not the manifold side? >> Interesting. >> >> Not much help, sorry. >> >> Cheers, >> >> Bob Haskell >> AHCA 3000 MkI registrar >> http://www.ciahc.org/registry_3000mk1.php >> >> >> On 03/24/2017 10:40 PM, Michael Oritt wrote: >> >>> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >>> up everything tomorrow. The Moss kit came with two phenolic spacers >>> about 3/8" thick that mount to the outer face of the carburetor bodies, >>> assumedly between the face and the air cleaners. >>> >>> My car is a Le Mans and cold air box was mounted directly to the carbs >>> without any blocks. Using them would make it just that much more >>> difficult to get the cold air box and the hose and hose adaptor in >>> place. It would also result in the fuel bowl overflow tubes not reaching >>> the grommeted holes in the box. >>> >>> What function do the blocks serve, are they normally found when CAB's >>> are mounted (as opposed to air cleaners) and if so what harm might be >>> caused by not using them? >>> >>> >>> _______________________________________________ >> >> > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/michael.oritt at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Sat Mar 25 11:08:09 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sat, 25 Mar 2017 13:08:09 -0400 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> <54697258-54e4-cc3c-f194-dcfe07aedaba@comcast.net> The workshop manual does not specify a torquing sequence, but I do it like Bob does. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell Sent: Saturday, March 25, 2017 11:59 AM To: healeys at autox.team.net Subject: Re: [Healeys] Rocker Shaft Installation, 6 cyl engine Absent a specific sequence, I always torque from the middle out, alternating sides. Bob ps. They're studs--unless someone has changed yours--so you're torquing nuts. On 3/25/2017 12:08 AM, John Spaur wrote: Shouldn't be. It's not like you are torqueing the head. John Spaur '62 BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of gturl gturl Sent: Friday, March 24, 2017 8:55 PM To: healeys at autox.team.net Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine Is there a preferred sequence for tightening the bolts holding the rocker shaft pedestals to the head? Thanks in advance.. Geoff Turl Image removed by sender. Virus-free. www.avg.com -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 350 bytes Desc: not available URL: From jmsdarch at sbcglobal.net Sat Mar 25 11:46:02 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Sat, 25 Mar 2017 10:46:02 -0700 Subject: [Healeys] Rocker Shaft Installation, 6 cyl engine References: <498155057.6920372.1490414124457.JavaMail.open-xchange@mtlgui04> <000601d2a536$94ca7940$be5f6bc0$@sbcglobal.net> <54697258-54e4-cc3c-f194-dcfe07aedaba@comcast.net> Per the shop manual: When reassembling the rocker gear, commence with the No. 4 bracket and secure the oil feed pipe with the washers in position, ensuring that the dowel on the banjo bolt locates in the rocker shaft. I should have checked the manual first. John Spaur -------------- next part -------------- An HTML attachment was scrubbed... URL: From phoenix722 at comcast.net Sat Mar 25 14:32:00 2017 From: phoenix722 at comcast.net (Mike S) Date: Sat, 25 Mar 2017 13:32:00 -0700 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> Seems obvious that the phenolic spacers were rattling.... On 3/25/2017 9:56 AM, Michael Oritt wrote: > Bob-- > > After further consideration--as well as impatience and laziness--I > decided to skip the spacers. As you say, fitting the CAB is difficult > enough without pushing everything further out under the shroud. > > Just took car for a shakedown and all seems good. In the process of > removing, rebuilding and refitting the carbs I also managed to lose an > annoying rattle that would only appear under acceleration between 3000 > and 3500 rpms. It has been there for about five years and no matter > what I did I could not find its source. Good riddance! > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell > And, the CABs are a PITA to remove and attach WITHOUT any more > spacers (probably why so many original ones are missing). We got > a repop for our M, but I'm considering installing some other type > of filter for normal, 'daily' use. > > Bob > > > On 3/25/2017 7:00 AM, Michael Oritt wrote: >> Bob-- >> >> To clarify, the kit came with four phenolic blocks or spacers. >> >> Two are square with scalloped sides and four holes and mount >> between the carbs and the intake manifold face. >> >> Two more are diamond shaped with two holes each to accept bolts >> to mount either air cleaners or a CAB. >> >> I assume they would provide some insulating value to minimize >> heat transfer from the carb body to the filter or CAB but I >> really cannot see that this would have any effect on the >> temperature of inlet air. >> >> Best--Michael Oritt >> >> On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell >> >> Michael, >> >> The the phenolic spacers are insulators. On other cars they >> would be installed between the manifold and the heat shield >> and/or the heat shield and the carbs. >> >> But these match the CAB side of the carb body, not the >> manifold side? Interesting. >> >> Not much help, sorry. >> >> Cheers, >> >> Bob Haskell >> AHCA 3000 MkI registrar >> http://www.ciahc.org/registry_3000mk1.php >> >> >> >> On 03/24/2017 10:40 PM, Michael Oritt wrote: >> >> I am reinstalling the H6 carbs after rebuilding them and >> I hope to wrap >> up everything tomorrow. The Moss kit came with two >> phenolic spacers >> about 3/8" thick that mount to the outer face of the >> carburetor bodies, >> assumedly between the face and the air cleaners. >> >> My car is a Le Mans and cold air box was mounted directly >> to the carbs >> without any blocks. Using them would make it just that >> much more >> difficult to get the cold air box and the hose and hose >> adaptor in >> place. It would also result in the fuel bowl overflow >> tubes not reaching >> the grommeted holes in the box. >> >> What function do the blocks serve, are they normally >> found when CAB's >> are mounted (as opposed to air cleaners) and if so what >> harm might be >> caused by not using them? >> >> >> _______________________________________________ >> > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/michael.oritt at gmail.com > > > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > -- Mike MGTD (long gone) BN1 (long gone) BN2-100M (gone but in good hands) BJ8 -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Sat Mar 25 14:53:21 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Sat, 25 Mar 2017 20:53:21 +0000 Subject: [Healeys] Phenolic spacers Don't know about your particular kits, but I do know many of the carb kits they sell these days are packaged so they fit a wide variety of cars with the same or similar carbs. The last kit I got for some Zenith Stromberg 175CDs had enough "extra" parts, including diaphragms for 150CDs, to rebuild another set of carbs. Point being just because it is in the kit doesn't mean it is meant for your car. I would use the gasket to make a good seal between carb and air cleaner and not worry about the insulating block. Greg Lemon ---- Michael Oritt wrote: > Bob-- > > To clarify, the kit came with four phenolic blocks or spacers. > > Two are square with scalloped sides and four holes and mount between the > carbs and the intake manifold face. > > Two more are diamond shaped with two holes each to accept bolts to mount > either air cleaners or a CAB. > > I assume they would provide some insulating value to minimize heat transfer > from the carb body to the filter or CAB but I really cannot see that this > would have any effect on the temperature of inlet air. > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > wrote: > > > Michael, > > > > The the phenolic spacers are insulators. On other cars they would be > > installed between the manifold and the heat shield and/or the heat shield > > and the carbs. > > > > But these match the CAB side of the carb body, not the manifold side? > > Interesting. > > > > Not much help, sorry. > > > > Cheers, > > > > Bob Haskell > > AHCA 3000 MkI registrar > > http://www.ciahc.org/registry_3000mk1.php > > > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > > >> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap > >> up everything tomorrow. The Moss kit came with two phenolic spacers > >> about 3/8" thick that mount to the outer face of the carburetor bodies, > >> assumedly between the face and the air cleaners. > >> > >> My car is a Le Mans and cold air box was mounted directly to the carbs > >> without any blocks. Using them would make it just that much more > >> difficult to get the cold air box and the hose and hose adaptor in > >> place. It would also result in the fuel bowl overflow tubes not reaching > >> the grommeted holes in the box. > >> > >> What function do the blocks serve, are they normally found when CAB's > >> are mounted (as opposed to air cleaners) and if so what harm might be > >> caused by not using them? > >> > >> > >> _______________________________________________ > >> Support Team.Net http://www.team.net/donate.html > >> Suggested annual donation $12.75 > >> Archive: http://www.team.net/archive > >> Forums: http://www.team.net/forums > >> > >> Healeys at autox.team.net > >> http://autox.team.net/mailman/listinfo/healeys > >> > >> Unsubscribe/Manage: http://autox.team.net/mailman/ > >> options/healeys/rchaskell at earthlink.net > >> > >> From michael.oritt at gmail.com Sat Mar 25 14:59:46 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 16:59:46 -0400 Subject: [Healeys] Phenolic spacers References: <58D658F7.4000209@earthlink.net> <0c93ef1c-bb52-0488-e116-babc2572333d@comcast.net> <0f140b06-ddaa-c981-feef-a24b3829529e@comcast.net> Mike-- Nope--In my first post I wrote "My car is a Le Mans and the cold air box was mounted directly to the carbs without any blocks." However it might very well have been the CAB itself--in any caae all seems good now. Best--Michael Oritt On Sat, Mar 25, 2017 at 4:32 PM, Mike S wrote: > Seems obvious that the phenolic spacers were rattling.... > > On 3/25/2017 9:56 AM, Michael Oritt wrote: > > Bob-- > > After further consideration--as well as impatience and laziness--I decided > to skip the spacers. As you say, fitting the CAB is difficult enough > without pushing everything further out under the shroud. > > Just took car for a shakedown and all seems good. In the process of > removing, rebuilding and refitting the carbs I also managed to lose an > annoying rattle that would only appear under acceleration between 3000 and > 3500 rpms. It has been there for about five years and no matter what I did > I could not find its source. Good riddance! > > Best--Michael Oritt > > On Sat, Mar 25, 2017 at 12:03 PM, Bob Spidell > wrote: > >> And, the CABs are a PITA to remove and attach WITHOUT any more spacers >> (probably why so many original ones are missing). We got a repop for our >> M, but I'm considering installing some other type of filter for normal, >> 'daily' use. >> >> Bob >> >> On 3/25/2017 7:00 AM, Michael Oritt wrote: >> >> Bob-- >> >> To clarify, the kit came with four phenolic blocks or spacers. >> >> Two are square with scalloped sides and four holes and mount between the >> carbs and the intake manifold face. >> >> Two more are diamond shaped with two holes each to accept bolts to mount >> either air cleaners or a CAB. >> >> I assume they would provide some insulating value to minimize heat >> transfer from the carb body to the filter or CAB but I really cannot see >> that this would have any effect on the temperature of inlet air. >> >> Best--Michael Oritt >> >> On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell >> wrote: >> >>> Michael, >>> >>> The the phenolic spacers are insulators. On other cars they would be >>> installed between the manifold and the heat shield and/or the heat shield >>> and the carbs. >>> >>> But these match the CAB side of the carb body, not the manifold side? >>> Interesting. >>> >>> Not much help, sorry. >>> >>> Cheers, >>> >>> Bob Haskell >>> AHCA 3000 MkI registrar >>> http://www.ciahc.org/registry_3000mk1.php >>> >>> >>> On 03/24/2017 10:40 PM, Michael Oritt wrote: >>> >>>> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap >>>> up everything tomorrow. The Moss kit came with two phenolic spacers >>>> about 3/8" thick that mount to the outer face of the carburetor bodies, >>>> assumedly between the face and the air cleaners. >>>> >>>> My car is a Le Mans and cold air box was mounted directly to the carbs >>>> without any blocks. Using them would make it just that much more >>>> difficult to get the cold air box and the hose and hose adaptor in >>>> place. It would also result in the fuel bowl overflow tubes not reaching >>>> the grommeted holes in the box. >>>> >>>> What function do the blocks serve, are they normally found when CAB's >>>> are mounted (as opposed to air cleaners) and if so what harm might be >>>> caused by not using them? >>>> >>>> >>>> _______________________________________________ >>> >>> >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/michael.oritt at gmail.com >> >> >> > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Healeys at autox.team.nethttp://autox.team.net/mailman/listinfo/healeys > > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/phoenix722 at comcast.net > > > -- > Mike > > MGTD (long gone) > BN1 (long gone) > BN2-100M (gone but in good hands) > BJ8 > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/michael.oritt at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.oritt at gmail.com Sat Mar 25 15:01:17 2017 From: michael.oritt at gmail.com (Michael Oritt) Date: Sat, 25 Mar 2017 17:01:17 -0400 Subject: [Healeys] Phenolic spacers References: <20170325205321.K62EW.294844.root@cdptpa-web06> Greg-- You're probably correct and the suggestion you made in your last paragraph is in fact the procedure I followed. Best--Michael Oritt On Sat, Mar 25, 2017 at 4:53 PM, wrote: > Don't know about your particular kits, but I do know many of the carb kits > they sell these days are packaged so they fit a wide variety of cars with > the same or similar carbs. The last kit I got for some Zenith Stromberg > 175CDs had enough "extra" parts, including diaphragms for 150CDs, to > rebuild another set of carbs. Point being just because it is in the kit > doesn't mean it is meant for your car. > > I would use the gasket to make a good seal between carb and air cleaner > and not worry about the insulating block. > > Greg Lemon > > ---- Michael Oritt wrote: > > Bob-- > > > > To clarify, the kit came with four phenolic blocks or spacers. > > > > Two are square with scalloped sides and four holes and mount between the > > carbs and the intake manifold face. > > > > Two more are diamond shaped with two holes each to accept bolts to mount > > either air cleaners or a CAB. > > > > I assume they would provide some insulating value to minimize heat > transfer > > from the carb body to the filter or CAB but I really cannot see that this > > would have any effect on the temperature of inlet air. > > > > Best--Michael Oritt > > > > On Sat, Mar 25, 2017 at 7:48 AM, Bob Haskell > > wrote: > > > > > Michael, > > > > > > The the phenolic spacers are insulators. On other cars they would be > > > installed between the manifold and the heat shield and/or the heat > shield > > > and the carbs. > > > > > > But these match the CAB side of the carb body, not the manifold side? > > > Interesting. > > > > > > Not much help, sorry. > > > > > > Cheers, > > > > > > Bob Haskell > > > AHCA 3000 MkI registrar > > > http://www.ciahc.org/registry_3000mk1.php > > > > > > > > > On 03/24/2017 10:40 PM, Michael Oritt wrote: > > > > > >> I am reinstalling the H6 carbs after rebuilding them and I hope to > wrap > > >> up everything tomorrow. The Moss kit came with two phenolic spacers > > >> about 3/8" thick that mount to the outer face of the carburetor > bodies, > > >> assumedly between the face and the air cleaners. > > >> > > >> My car is a Le Mans and cold air box was mounted directly to the carbs > > >> without any blocks. Using them would make it just that much more > > >> difficult to get the cold air box and the hose and hose adaptor in > > >> place. It would also result in the fuel bowl overflow tubes not > reaching > > >> the grommeted holes in the box. > > >> > > >> What function do the blocks serve, are they normally found when CAB's > > >> are mounted (as opposed to air cleaners) and if so what harm might be > > >> caused by not using them? > > >> > > >> > > >> _______________________________________________ > > >> Support Team.Net http://www.team.net/donate.html > > >> Suggested annual donation $12.75 > > >> Archive: http://www.team.net/archive > > >> Forums: http://www.team.net/forums > > >> > > >> Healeys at autox.team.net > > >> http://autox.team.net/mailman/listinfo/healeys > > >> > > >> Unsubscribe/Manage: http://autox.team.net/mailman/ > > >> options/healeys/rchaskell at earthlink.net > > >> > > >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Sat Mar 25 15:42:31 2017 From: bspidell at comcast.net (Bob Spidell) Date: Sat, 25 Mar 2017 14:42:31 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide *http://tinyurl.com/mkht72e* -------------- next part -------------- An HTML attachment was scrubbed... URL: From fsufan1952 at yahoo.com Sat Mar 25 18:33:05 2017 From: fsufan1952 at yahoo.com (fsufan1952 at yahoo.com) Date: Sat, 25 Mar 2017 20:33:05 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: $473 ? , I wonder if it's signed by the author? Sent from my iPhone > On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: > > http://tinyurl.com/mkht72e > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: From m.fawcett at cox.net Sat Mar 25 21:28:41 2017 From: m.fawcett at cox.net (Mark Fawcett) Date: Sat, 25 Mar 2017 20:28:41 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <-7983912800445063073@unknownmsgid> i have signed copy and would sell it for that price. Mark Fawcett On Sat, Mar 25, 2017 at 5:33 PM, wrote: > $473 ? , I wonder if it's signed by the author? > > Sent from my iPhone > > On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: > > *http://tinyurl.com/mkht72e * > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/fsufan1952 at yahoo.com > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/m.fawcett at cox.net > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From p_cquinn at tpg.com.au Sat Mar 25 22:16:08 2017 From: p_cquinn at tpg.com.au (Patrick & Caroline Quinn) Date: Sun, 26 Mar 2017 15:16:08 +1100 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> My Anderson/Moment book is signed by both. Hoo Roo Patrick Quinn Blue Mountains Australia From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of fsufan1952 at yahoo.com Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide $473 ? , I wonder if it's signed by the author? Sent from my iPhone On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healey.nut at gmail.com Sat Mar 25 23:11:03 2017 From: healey.nut at gmail.com (Alan Seigrist) Date: Sun, 26 Mar 2017 13:11:03 +0800 Subject: [Healeys] Phenolic spacers References: <20170325205321.K62EW.294844.root@cdptpa-web06> The phenolic spacers are usually used to get the proper mounting distance from the exhaust manifolds for various applications - they come in many different sizes. If your car didn't have them, there's no need for them. Interestingly, on later smog equipped cars, they put a air heater in that spot to better vaporize the mixture. On Sun, Mar 26, 2017 at 4:53 AM, wrote: > Don't know about your particular kits, but I do know many of the carb kits > they sell these days are packaged so they fit a wide variety of cars with > the same or similar carbs. The last kit I got for some Zenith Stromberg > 175CDs had enough "extra" parts, including diaphragms for 150CDs, to > rebuild another set of carbs. Point being just because it is in the kit > doesn't mean it is meant for your car. > > I would use the gasket to make a good seal between carb and air cleaner > and not worry about the insulating block. > > Greg Lemon > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From edriver at sasktel.net Sun Mar 26 10:01:06 2017 From: edriver at sasktel.net (E.A. Driver) Date: Sun, 26 Mar 2017 10:01:06 -0600 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: > > My Anderson/Moment book is signed by both. > > Hoo Roo > > Patrick Quinn > > Blue Mountains Australia > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *fsufan1952 at yahoo.com > *Sent:* Sunday, 26 March 2017 11:33 AM > *To:* Bob Spidell > *Cc:* Healeys > *Subject:* Re: [Healeys] Something to go in your bookcase alongside > your Anderson/Moment Restoration Guide > > $473 ? , I wonder if it's signed by the author? > > Sent from my iPhone > > > On Mar 25, 2017, at 5:42 PM, Bob Spidell > *http://tinyurl.com/mkht72e* > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From vintage_roadster_restoration at hotmail.com Sun Mar 26 10:53:17 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Sun, 26 Mar 2017 16:53:17 +0000 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean ________________________________ From: Healeys on behalf of E.A. Driver Sent: March 26, 2017 4:01 PM To: healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: My Anderson/Moment book is signed by both. Hoo Roo Patrick Quinn Blue Mountains Australia Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide $473 ? , I wonder if it's signed by the author? Sent from my iPhone http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From goldengt at cal.net Sun Mar 26 11:40:36 2017 From: goldengt at cal.net (goldengt) Date: Sun, 26 Mar 2017 10:40:36 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide Mine got loaned and I'll probably never see it again.?Ken Freese? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Jean Caron Date: 3/26/17 9:53 AM (GMT-08:00) To: "E.A. Driver" , healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean From: Healeys on behalf of E.A. Driver Sent: March 26, 2017 4:01 PM To: healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide ? So is mine! EAD Canadian Prairies Saskatoon, Saskatchewan On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: My Anderson/Moment book is signed by both. ? Hoo Roo ? Patrick Quinn Blue Mountains Australia ? ? ? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of fsufan1952 at yahoo.com Sent: Sunday, 26 March 2017 11:33 AM To: Bob Spidell Cc: Healeys Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide ? $473 ? , I wonder if it's signed by the author? Sent from my iPhone On Mar 25, 2017, at 5:42 PM, Bob Spidell wrote: http://tinyurl.com/mkht72e _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From leavcast at gmail.com Sun Mar 26 12:48:46 2017 From: leavcast at gmail.com (George Castleberry) Date: Sun, 26 Mar 2017 11:48:46 -0700 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> $420?.what are they smoking? From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael MacLean Sent: Friday, March 24, 2017 2:19 PM To: i erbs; Ahealey help Subject: Re: [Healeys] Moment Anderson book on ebay Never mind that. Look at the other one at the middle of the page for a buy it now of $420.00! Mike MacLean On Friday, March 24, 2017 1:22 PM, i erbs wrote: currently at $195.00 http://www.ebay.com/itm/Austin-Healey-RESTORATION-GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g:DyAAAOSwtfhYn5Fg &vxp=mtr Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Sun Mar 26 13:48:51 2017 From: eyera3000 at gmail.com (i erbs) Date: Sun, 26 Mar 2017 12:48:51 -0700 Subject: [Healeys] Moment Anderson book on ebay References: It sold for $202.50 Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 24, 2017 11:48 AM, "i erbs" wrote: > currently at $195.00 > > http://www.ebay.com/itm/Austin-Healey-RESTORATION- > GUIDE-book-100-100S-100-6-3000-/172582392243?hash=item282eb651b3:g: > DyAAAOSwtfhYn5Fg&vxp=mtr > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbyers at ec.rr.com Sun Mar 26 14:17:12 2017 From: sbyers at ec.rr.com (BJ8Healeys) Date: Sun, 26 Mar 2017 16:17:12 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, Mine is pristine with no signatures to deface it and I would probably let it go for around $500 or more, heh, heh, heh..... I have found several errors in that book related to BJ8s (what book doesn't have errors?) and discussed them with Gary Anderson. Unfortunately, there are no plans by the publisher to issue an update or errata sheet. I guess that makes the original edition more valuable. Steve Byers HBJ8L/36666 BJ8 Registry AHCA Delegate at Large Havelock, NC From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Jean Caron Sent: Sunday, March 26, 2017 12:53 PM To: E.A. Driver; healeys at autox.team.net Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. Jean -------------- next part -------------- An HTML attachment was scrubbed... URL: From m.brouillette at comcast.net Sun Mar 26 15:33:00 2017 From: m.brouillette at comcast.net (mike brouillette) Date: Sun, 26 Mar 2017 17:33:00 -0400 Subject: [Healeys] Moment Anderson book on ebay References: <2042013805.2478670.1490390311449@mail.yahoo.com> <013201d2a661$9a2c03a0$ce840ae0$@gmail.com> Another one just got listed for $195. http://www.ebay.com/itm/-/152486878522? -------------- next part -------------- An HTML attachment was scrubbed... URL: From sentenac.rw at gmail.com Sun Mar 26 16:36:03 2017 From: sentenac.rw at gmail.com (sentenac.rw at gmail.com) Date: Sun, 26 Mar 2017 15:36:03 -0700 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au>, Sounds like mine. I wonder how many later purchasers of the now out of print Guide also have the four pages of single spaced Corrections and Additions from 2001. Doesn't matter if you're not going to use the book ;-) -Roland BN1 #724 On Sun, 26 Mar 2017 16:53:17 +0000, you wrote: >No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. > > >Jean > > >________________________________ >From: Healeys on behalf of E.A. Driver >Sent: March 26, 2017 4:01 PM >To: healeys at autox.team.net >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >So is mine! > >EAD >Canadian Prairies >Saskatoon, Saskatchewan > >On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: >My Anderson/Moment book is signed by both. > >Hoo Roo > >Patrick Quinn >Blue Mountains Australia > > > >Sent: Sunday, 26 March 2017 11:33 AM >To: Bob Spidell >Cc: Healeys >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >$473 ? , I wonder if it's signed by the author? > >Sent from my iPhone > > >http://tinyurl.com/mkht72e >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > > From ahbt71 at gmail.com Sun Mar 26 17:33:41 2017 From: ahbt71 at gmail.com (Mike Tobin) Date: Sun, 26 Mar 2017 17:33:41 -0600 Subject: [Healeys] Caliper Piston Dustcover Hi, If anyone is still out there. I got the caliper apart and cleaned (thanks all) and now I'm having trouble getting the pistons in with the dust covers. I can get the piston in or I can get the dust cover seated in its slot in the cylender. I can't get both. If I put the piston in first I can't get the cover into its slot. If I put the cover in first I can't keep it in position and while installing the piston. I know I've done this back in the day and I don't remember having any problem (or maybe I just said "Screw It!" and only fit the cover to the piston). Cheers, Mike Tobin, Townsend, Montana -------------- next part -------------- An HTML attachment was scrubbed... URL: From rchaskell at earthlink.net Sun Mar 26 18:17:14 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Sun, 26 Mar 2017 20:17:14 -0400 Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> <057c01d2a66d$f64ec850$e2ec58f0$@rr.com> Steve, Here's the errata sheet that Gary sent me back in 2002. If Gary and/or Roger can provide an new version, I'd be glad to update it. http://liblbc.info/images/Healey/Books/errata_rg.pdf Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php On 03/26/2017 04:17 PM, BJ8Healeys wrote: > Mine is pristine with no signatures to deface it and I would probably > let it go for around $500 or more, heh, heh, heh..... > > I have found several errors in that book related to BJ8s (what book > doesn't have errors?) and discussed them with Gary Anderson. > Unfortunately, there are no plans by the publisher to issue an update or > errata sheet. I guess that makes the original edition more valuable. > > Steve Byers > > HBJ8L/36666 > > BJ8 Registry > > AHCA Delegate at Large > > Havelock, NC > > *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of > *Jean Caron > *Sent:* Sunday, March 26, 2017 12:53 PM > *To:* E.A. Driver; healeys at autox.team.net > *Subject:* Re: [Healeys] Something to go in your bookcase alongside your > Anderson/Moment Restoration Guide > > No signatures in mine, but I have greasy pages, the cover is taped at > the corners so it does not tear apart, several notes in many pages and I > use it almost every week, great reference. > > Jean > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell at earthlink.net > From rrengineer.mike at att.net Sun Mar 26 19:29:31 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Mon, 27 Mar 2017 01:29:31 +0000 (UTC) Subject: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide References: <666326A5-F87D-4A20-B7B4-B163D8A8BCF9@yahoo.com> <003c01d2a5e7$b32f5de0$198e19a0$@tpg.com.au> I remember someone asking me if I waned it autographed for something like 5 or 10 bucks more when I was ordering my copy by phone.? Would that have added another $100 to the value?Mike MacLean On Sunday, March 26, 2017 5:33 PM, "sentenac.rw at gmail.com" wrote: Sounds like mine.? I wonder how many later purchasers of the now out of print Guide also have the four pages of single spaced Corrections and Additions from 2001.? Doesn't matter if you're not going to use the book ;-) -Roland BN1 #724 On Sun, 26 Mar 2017 16:53:17 +0000, you wrote: >No signatures in mine, but I have greasy pages, the cover is taped at the corners so it does not tear apart, several notes in many pages and I use it almost every week, great reference. > > >Jean > > >________________________________ >From: Healeys on behalf of E.A. Driver >Sent: March 26, 2017 4:01 PM >To: healeys at autox.team.net >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >So is mine! > >EAD >Canadian Prairies >Saskatoon, Saskatchewan > >On 25/03/2017 10:16 PM, Patrick & Caroline Quinn wrote: >My Anderson/Moment book is signed by both. > >Hoo Roo > >Patrick Quinn >Blue Mountains Australia > > > >Sent: Sunday, 26 March 2017 11:33 AM >To: Bob Spidell >Cc: Healeys >Subject: Re: [Healeys] Something to go in your bookcase alongside your Anderson/Moment Restoration Guide > >$473 ? , I wonder if it's signed by the author? > >Sent from my iPhone > > >http://tinyurl.com/mkht72e >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation? $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fsufan1952 at yahoo.com > > > >_______________________________________________ >Support Team.Net http://www.team.net/donate.html >Suggested annual donation? $12.75 >Archive: http://www.team.net/archive >Forums: http://www.team.net/forums > >http://autox.team.net/mailman/listinfo/healeys > >Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/edriver at sasktel.net > > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From glemon at neb.rr.com Sun Mar 26 22:15:50 2017 From: glemon at neb.rr.com (glemon at neb.rr.com) Date: Mon, 27 Mar 2017 4:15:50 +0000 Subject: [Healeys] Caliper Piston Dustcover Mike, I had the same issue on my TR250 (same brakes as a BJ8). Spent the better part of a Saturday trying to get them on, got a couple on, tore a couple, ordered another kit. The new kit was much easier, though still a bit finicky, the rubber was slightly thinner and it made everything fit much better. I don't remember where I sourced either, but the first set was obviously not that well made. Also if you are working with used parts make sure the grooves and everything are cleaned out very thoroughly. Greg Lemon 68 TR250 ---- Mike Tobin wrote: > Hi, If anyone is still out there. > I got the caliper apart and cleaned (thanks all) and now I'm having trouble > getting the pistons in with the dust covers. > I can get the piston in or I can get the dust cover seated in its slot in > the cylender. I can't get both. > If I put the piston in first I can't get the cover into its slot. If I put > the cover in first I can't keep it in position and while installing the > piston. > I know I've done this back in the day and I don't remember having any > problem (or maybe I just said "Screw It!" and only fit the cover to the > piston). > Cheers, > Mike Tobin, > Townsend, Montana From rrengineer.mike at att.net Mon Mar 27 01:16:47 2017 From: rrengineer.mike at att.net (Michael MacLean) Date: Mon, 27 Mar 2017 07:16:47 +0000 (UTC) Subject: [Healeys] Brake Cleaner References: <2119238946.3496448.1490599007901.ref@mail.yahoo.com> I was looking for something to clean off some oil spreading around the fill and drain plugs of the differential so I could paint it. ?Here in California any chemical that works is banned. ?It's impossible to find a degreaser that works. ?Looking around the Internet I found a brake and parts cleaner in a spray can made by Wurth. ?It says on the can, "Not for retail sale", but you can buy it at Pegasus Racing for less than 6 bucks. ?I sprayed the oil on the diff with this stuff and waited for it to dry. ?There was no runoff on the ground below where I sprayed, but when it was dry the oil was gone and it was bone dry. ?What makes this so good in this case is the diff had been sand blasted to a rough surface. ?I did not think it would be easy to get out. ?Heck I got to buy more of this stuff. ?No financial interest, just a very satisfied customer. (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies | | | | | | | | | | | (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies Wurth makes the best non-chlorinated brake cleaner available. Removes grease, oil, and brake dust and dries quickly without residue. Harmless to most plastics. | | | | Mike MacLean Sent from Yahoo Mail on Android -------------- next part -------------- An HTML attachment was scrubbed... URL: From michael.salter at gmail.com Mon Mar 27 06:16:53 2017 From: michael.salter at gmail.com (michael.salter at gmail.com) Date: Mon, 27 Mar 2017 12:16:53 +0000 (UTC) Subject: [Healeys] Caliper Piston Dustcover References: <20170327041550.Q9GEP.11688.root@cdptpa-web12> Hi Mike, Installing those dust covers can be very difficult however with patience and liberal application of brake grease it can be achieved. First, as Greg mentioned it it imperative that both the grooves in the body are scrupulously clean. Scrape around with a dental pick to ensure that any rust is removed. Now insert the piston seal fully into the lower groove being sure to press it fully home with your thumbs. Apply a little brake grease to it. Next insert the lower lip of the dust seal into the upper groove again being sure to press it fully home with your thumbs. Now lightly? press the closed end of the greased piston against the dust seal and use a small wire hook to lift the outer lip of the dust seal onto the outside of the piston. Now it will be possible to wiggle the piston? into the bore through both seals. DO NOT FORCE IT IN. LIGHT THUMB PRESSURE SHOULD BE ALL THAT IS REQUIRED. Finally use a dental pic to guide the outer lip of the dust seal into its groove in the piston. Only 3 to go... Michael S BN1 #174 With 4 wheel drum brakes. ? From: glemon at neb.rr.com Sent: Monday, March 27, 12:23 AM Subject: Re: [Healeys] Caliper Piston Dustcover To: healeys at autox.team.net, Mike Tobin Mike, I had the same issue on my TR250 (same brakes as a BJ8). Spent the better part of a Saturday trying to get them on, got a couple on, tore a couple, ordered another kit. The new kit was much easier, though still a bit finicky, the rubber was slightly thinner and it made everything fit much better. I don't remember where I sourced either, but the first set was obviously not that well made. Also if you are working with used parts make sure the grooves and everything are cleaned out very thoroughly. Greg Lemon 68 TR250 ---- Mike Tobin wrote: > Hi, If anyone is still out there. > I got the caliper apart and cleaned (thanks all) and now I'm having trouble > getting the pistons in with the dust covers. > I can get the piston in or I can get the dust cover seated in its slot in > the cylender. I can't get both. > If I put the piston in first I can't get the cover into its slot. If I put > the cover in first I can't keep it in position and while installing the > piston. > I know I've done this back in the day and I don't remember having any > problem (or maybe I just said "Screw It!" and only fit the cover to the > piston). > Cheers, > Mike Tobin, > Townsend, Montana _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From simon.lachlan at homecall.co.uk Mon Mar 27 09:25:19 2017 From: simon.lachlan at homecall.co.uk (Simon Lachlan) Date: Mon, 27 Mar 2017 16:25:19 +0100 Subject: [Healeys] FW: Caliper Piston Dustcover References: <20170327041550.Q9GEP.11688.root@cdptpa-web12> <3E17D0DD06EE3063.83ced4e6-546f-4184-93e9-558992bd613c@mail.outlook.com> Is my memory playing me up or, having stripped and split the caliper, doesn?t one fit pistons while it?s still split? (Just the once, as one splits the calipers, say, every 50 years.) Simon Sent: 27 March 2017 13:17 Subject: Re: [Healeys] Caliper Piston Dustcover Hi Mike, Installing those dust covers can be very difficult however with patience and liberal application of brake grease it can be achieved. First, as Greg mentioned it it imperative that both the grooves in the body are scrupulously clean. Scrape around with a dental pick to ensure that any rust is removed. Now insert the piston seal fully into the lower groove being sure to press it fully home with your thumbs. Apply a little brake grease to it. Next insert the lower lip of the dust seal into the upper groove again being sure to press it fully home with your thumbs. Now lightly press the closed end of the greased piston against the dust seal and use a small wire hook to lift the outer lip of the dust seal onto the outside of the piston. Now it will be possible to wiggle the piston into the bore through both seals. DO NOT FORCE IT IN. LIGHT THUMB PRESSURE SHOULD BE ALL THAT IS REQUIRED. Finally use a dental pic to guide the outer lip of the dust seal into its groove in the piston. Only 3 to go... Michael S BN1 #174 With 4 wheel drum brakes. ? Sent: Monday, March 27, 12:23 AM Subject: Re: [Healeys] Caliper Piston Dustcover -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Mon Mar 27 10:06:20 2017 From: eyera3000 at gmail.com (i erbs) Date: Mon, 27 Mar 2017 09:06:20 -0700 Subject: [Healeys] Brake Cleaner References: <2119238946.3496448.1490599007901.ref@mail.yahoo.com> <2119238946.3496448.1490599007901@mail.yahoo.com> I just hate paying more to ship an item than I paid for it. I'll look to se eif it's available locally or on Amazon. Great product... [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Mon, Mar 27, 2017 at 12:16 AM, Michael MacLean wrote: > I was looking for something to clean off some oil spreading around the > fill and drain plugs of the differential so I could paint it. Here in > California any chemical that works is banned. It's impossible to find a > degreaser that works. Looking around the Internet I found a brake and > parts cleaner in a spray can made by Wurth. It says on the can, "Not for > retail sale", but you can buy it at Pegasus Racing for less than 6 bucks. > I sprayed the oil on the diff with this stuff and waited for it to dry. > There was no runoff on the ground below where I sprayed, but when it was > dry the oil was gone and it was bone dry. What makes this so good in this > case is the diff had been sand blasted to a rough surface. I did not think > it would be easy to get out. Heck I got to buy more of this stuff. No > financial interest, just a very satisfied customer. > > (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies > > (HAO) Wurth Brake Cleaner - Pegasus Auto Racing Supplies > > Wurth makes the best non-chlorinated brake cleaner available. Removes > grease, oil, and brake dust and dries quickly without residue. Harmless to > most plastics. > > > Mike MacLean > > Sent from Yahoo Mail on Android > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 42103 bytes Desc: not available URL: From rd_parker at juno.com Tue Mar 28 07:48:51 2017 From: rd_parker at juno.com (rd_parker at juno.com) Date: Tue, 28 Mar 2017 06:48:51 -0700 Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc From vintage_roadster_restoration at hotmail.com Tue Mar 28 08:27:08 2017 From: vintage_roadster_restoration at hotmail.com (Jean Caron) Date: Tue, 28 Mar 2017 14:27:08 +0000 Subject: [Healeys] Rotisseries. References: Bob, Check this site, it will likely be of help for you. www.homemadetools.net/category/rotisseries Homemade Rotisseries - HomemadeTools.net www.homemadetools.net Homemade Rotisseries tools. ... Free 50 Must Read Homemade Tools ebook. Join 20,941 of us on the Homemade Tools forum, and get your free 50 Must Read Homemade Tools ... Jean ________________________________ From: Healeys on behalf of rd_parker at juno.com Sent: March 28, 2017 1:48 PM To: Healeys at autox.team.net Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc _______________________________________________ www.team.net www.team.net The Team.Net email, archive, ftp and web services are run on a part time volunteer basis. There are out of pocket expenses involved in the network connection, name ... Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From bspidell at comcast.net Tue Mar 28 08:33:54 2017 From: bspidell at comcast.net (Bob Spidell) Date: Tue, 28 Mar 2017 07:33:54 -0700 Subject: [Healeys] Rotisseries. References: This is what my dad built--without telling me--for our 100 resto. Bob On 3/28/2017 6:48 AM, rd_parker at juno.com wrote: > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > > -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0005_IMG.JPG Type: image/jpeg Size: 514055 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0007_IMG.JPG Type: image/jpeg Size: 435885 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 100-0008_IMG.JPG Type: image/jpeg Size: 443004 bytes Desc: not available URL: From ahbn6 at verizon.net Tue Mar 28 08:49:39 2017 From: ahbn6 at verizon.net (John Sims) Date: Tue, 28 Mar 2017 10:49:39 -0400 Subject: [Healeys] Rotisseries. References: Look on this page: http://healey6.com/parts_suppliers.htm Under the Miscellaneous section there are listings for several rotisserie manufacturers. John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of rd_parker at juno.com Sent: Tuesday, March 28, 2017 9:49 AM To: Healeys at autox.team.net Subject: [Healeys] Rotisseries. Gentlemen, Do any of you have information on vehicle rotisseries? I am considering getting one, or building one, that will help me on my restoration of my 1961 BT7. Thanks in advance for any information, Bob P. Bellflower, CA. ____________________________________________________________ This Herb Stops Balding Immediately And Restarts Hair Growth Regrow Hair Protocol http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc _______________________________________________ $12.75 Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/ahbn6 at verizon.net From drmasucci at comcast.net Tue Mar 28 09:40:00 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 11:40:00 -0400 Subject: [Healeys] Rotisseries. References: I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 59812 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 84643 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > From drmasucci at comcast.net Tue Mar 28 09:41:11 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 11:41:11 -0400 Subject: [Healeys] Rotisseries. References: A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 71852 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 59812 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > From eschulz at frontiernet.net Tue Mar 28 13:38:49 2017 From: eschulz at frontiernet.net (Elton Schulz) Date: Tue, 28 Mar 2017 15:38:49 -0400 Subject: [Healeys] Rotisseries. References: <4ccdd705-5e91-8339-56ae-a9d350bdde8f@comcast.net> I built one using your dad's design. Worked great for me. I disassembled it after using it for my BJ7. Still have all the pieces if someone wants it. I'm located in western New York State. Thanks, Elton On 3/28/2017 10:33 AM, Bob Spidell wrote: > This is what my dad built--without telling me--for our 100 resto. > > Bob > > > On 3/28/2017 6:48 AM, rd_parker at juno.com wrote: >> Gentlemen, >> >> Do any of you have information on vehicle rotisseries? I am considering >> getting one, or building one, that will help me on my restoration of my >> 1961 BT7. >> >> Thanks in advance for any information, >> >> Bob P. >> Bellflower, CA. >> >> ____________________________________________________________ >> >> > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eschulz at frontiernet.net > -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Tue Mar 28 15:04:59 2017 From: eyera3000 at gmail.com (i erbs) Date: Tue, 28 Mar 2017 14:04:59 -0700 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> This may seem like a silly question... How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. Very clever solution Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: > I used two Harbor Freight engine stands and some home made adapters. > Worked surprisingly well. Now one of those stands is supporting my engine > rebuild. > > > > Sent from my iPhone > > > On Mar 28, 2017, at 9:48 AM, > wrote: > > > > Gentlemen, > > > > Do any of you have information on vehicle rotisseries? I am considering > > getting one, or building one, that will help me on my restoration of my > > 1961 BT7. > > > > Thanks in advance for any information, > > > > Bob P. > > Bellflower, CA. > > > > ____________________________________________________________ > > This Herb Stops Balding Immediately And Restarts Hair Growth > > Regrow Hair Protocol > > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > Suggested annual donation $12.75 > > Archive: http://www.team.net/archive > > Forums: http://www.team.net/forums > > > > Healeys at autox.team.net > > http://autox.team.net/mailman/listinfo/healeys > > > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/drmasucci at comcast.net > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From blkbt7 at yahoo.com Tue Mar 28 15:16:45 2017 From: blkbt7 at yahoo.com (ROBERT BROWN) Date: Tue, 28 Mar 2017 16:16:45 -0500 Subject: [Healeys] BJ8 Oil Filter I'm about to change the oil on a BJ8 equipped with a spin-on filter (probably from Moss). I can't read the filter part number while on the engine and would prefer to purchase a new one prior to removing the old. Would some kind BJ8 owner know what filter to use? TIA Bob BT7 owner Sent from my iPhone From drmasucci at comcast.net Tue Mar 28 17:05:12 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 19:05:12 -0400 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> The frame and structure is a two-man lift. My step son rolled it out of my barn up to the ramp truck, we were able to roll it up the ramp with one person on each stand. We then disconnected it from the stands for transport. We got to the shop and carried it off the truck and into the shop. We then inserted the black rotating pieces back into the stands. You can have one guy in the back and one up front. Both lift to proper height, while one gets his into the stand. Then the other. Obviously easier with three people, but we did it without a hitch. It was all much more stable than even I expected. When working on the car, one person can rotate the car without fear of tipping. I would not use these stands with a bigger car, but for the Healey it was great. The two stands cost under $400, plus about another $70 in steel from McMaster-Carr. Plus I can sell one of the stands. It's for sale for say $90. Note that I modified the stands so that the rotating angle would be parallel to the ground. Drilled one additional hole to set the proper angle. It can be switched back and forth in 10 minutes. And yes I installed all brake and fuel lines, all electrics, and other small items while still on the stands. I took the car off the stands before I installed the suspension. Sent from my iPhone > On Mar 28, 2017, at 5:04 PM, i erbs wrote: > > This may seem like a silly question... > How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. > Very clever solution > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > >> On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: >> I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. >> >> >> >> Sent from my iPhone >> >> > On Mar 28, 2017, at 9:48 AM, wrote: >> > >> > Gentlemen, >> > >> > Do any of you have information on vehicle rotisseries? I am considering >> > getting one, or building one, that will help me on my restoration of my >> > 1961 BT7. >> > >> > Thanks in advance for any information, >> > >> > Bob P. >> > Bellflower, CA. >> > >> > ____________________________________________________________ >> > This Herb Stops Balding Immediately And Restarts Hair Growth >> > Regrow Hair Protocol >> > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc >> > _______________________________________________ >> > Support Team.Net http://www.team.net/donate.html >> > Suggested annual donation $12.75 >> > Archive: http://www.team.net/archive >> > Forums: http://www.team.net/forums >> > >> > Healeys at autox.team.net >> > http://autox.team.net/mailman/listinfo/healeys >> > >> > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net >> > >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 116585 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 90331 bytes Desc: not available URL: From drmasucci at comcast.net Tue Mar 28 17:19:59 2017 From: drmasucci at comcast.net (David Masucci) Date: Tue, 28 Mar 2017 19:19:59 -0400 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> Actually I'm forgetting. I was able to get most of the suspension on also while still on the stands. Then I took it off and sat it on wire spool stands that were being thrown away where I work. Back on wire spool stands. Sent from my iPhone > On Mar 28, 2017, at 5:04 PM, i erbs wrote: > > This may seem like a silly question... > How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. > Very clever solution > > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > >> On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: >> I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. >> >> >> >> Sent from my iPhone >> >> > On Mar 28, 2017, at 9:48 AM, wrote: >> > >> > Gentlemen, >> > >> > Do any of you have information on vehicle rotisseries? I am considering >> > getting one, or building one, that will help me on my restoration of my >> > 1961 BT7. >> > >> > Thanks in advance for any information, >> > >> > Bob P. >> > Bellflower, CA. >> > >> > ____________________________________________________________ >> > This Herb Stops Balding Immediately And Restarts Hair Growth >> > Regrow Hair Protocol >> > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc >> > _______________________________________________ >> > Support Team.Net http://www.team.net/donate.html >> > Suggested annual donation $12.75 >> > Archive: http://www.team.net/archive >> > Forums: http://www.team.net/forums >> > >> > Healeys at autox.team.net >> > http://autox.team.net/mailman/listinfo/healeys >> > >> > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net >> > >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image1.JPG Type: image/jpeg Size: 1334944 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image2.JPG Type: image/jpeg Size: 1400047 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image3.JPG Type: image/jpeg Size: 1421634 bytes Desc: not available URL: From ah3000me at gmail.com Tue Mar 28 18:47:52 2017 From: ah3000me at gmail.com (Tom) Date: Tue, 28 Mar 2017 20:47:52 -0400 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> Bob, My spin-on filter adapter is from Moss, and I use a WIX 51516. John Sims's site has additional info: http://healey6.com/replacement_parts.htm - tom On Tue, Mar 28, 2017 at 5:16 PM, ROBERT BROWN wrote: > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/ah3000me at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From thehartnetts at earthlink.net Tue Mar 28 22:54:06 2017 From: thehartnetts at earthlink.net (Len and/or Marge Hartnett) Date: Tue, 28 Mar 2017 21:54:06 -0700 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > From ahbn6 at verizon.net Wed Mar 29 05:24:51 2017 From: ahbn6 at verizon.net (John Sims) Date: Wed, 29 Mar 2017 07:24:51 -0400 Subject: [Healeys] BJ8 Oil Filter References: <29F93FA2-CC43-4FE2-A247-EBD1F83F9F75@yahoo.com> <230573B327A34BABA9CADECA3A0D0333@LeonardPCPC> This is rather dated but it is worth a read: http://www.minimopar.net/oilfilters/ John Sims Aberdeen, NJ www.healey6.com -----Original Message----- From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Len and/or Marge Hartnett Sent: Wednesday, March 29, 2017 12:54 AM To: AH Mail List Subject: Re: [Healeys] BJ8 Oil Filter Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys http://autox.team.net/mailman/options/healeys/ahbn6 at verizon.net From tomfelts at windstream.net Wed Mar 29 06:37:01 2017 From: tomfelts at windstream.net (Tom Felts) Date: Wed, 29 Mar 2017 8:37:01 -0400 Subject: [Healeys] BJ8 Oil Filter I use a NAPA filter. ---- Len and/or Marge Hartnett wrote: ============= Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From tomfelts at windstream.net Wed Mar 29 06:39:00 2017 From: tomfelts at windstream.net (Tom Felts) Date: Wed, 29 Mar 2017 8:39:00 -0400 Subject: [Healeys] BJ8 Oil Filter Disregard---I didn't read the original post. tom ---- Tom Felts wrote: ============= I use a NAPA filter. ---- Len and/or Marge Hartnett wrote: ============= Bob: I use the K&N HP2009. The Fram PH3600 has also been mentioned on this List. You could cross reference the following which have been declared as OK in a study by a List member. I do not have their numbers. I'm sure other Listers will be volunteering their thoughts. Oil Filters - OK brands: AC Delco Duragard AC Delco Ultraguard Gold Amsoil Baldwin Fram Tough Guard Mobil 1 Purolator Premium Plus Wix (The Other) Len Fairfield, CA, USA 1967 AH 3000 MkIII, HBJ8L39031 ----- Original Message ----- From: "ROBERT BROWN" To: "Healey List" Sent: Tuesday, March 28, 2017 2:16 PM Subject: [Healeys] BJ8 Oil Filter > I'm about to change the oil on a BJ8 equipped with a spin-on filter > (probably from Moss). I can't read the filter part number while on the > engine and would prefer to purchase a new one prior to removing the old. > Would some kind BJ8 owner know what filter to use? > TIA > Bob > BT7 owner > > Sent from my iPhone > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: > http://autox.team.net/mailman/options/healeys/thehartnetts at earthlink.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys From eyera3000 at gmail.com Wed Mar 29 08:24:09 2017 From: eyera3000 at gmail.com (I Erbs) Date: Wed, 29 Mar 2017 07:24:09 -0700 Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> Scam warning Mr. Ira Erbs Portland, OR excuse typos and strange words my phone wants you to see ---------- Forwarded message ---------- From: "Marion S. Brantley, Jr." Date: Mar 29, 2017 6:01 AM Subject: Terrible Misfortune To: Cc: Good Morning, I'm writing this with tears in my eyes, my family and i came down here to Marseille on a short trip.Unfortunately we were mugged at the park of the hotel where we stayed all cash,credit card and mobile phone were stolen off us but luckily we still have our passports with us. I made contact with my bank but it would take me 5 working days to access funds in my account,the bad news is our flight will be leaving in less than 8-hrs from now but we're having problems settling the hotel bills and the hotel manager won't let us leave until we settle the bills. I'll need your help financially and i promise to make the refund once we get back home,Please let me know if i can count on you and i need you to keep checking your email because it's the only way i can reach you. I anticipate your response Marion S. Brantley, Jr. Tampa Bay Austin-Healey Club Membership Chmn. & Delegate -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyron at yahoo.com Wed Mar 29 09:05:51 2017 From: healeyron at yahoo.com (Ron Mitchell) Date: Wed, 29 Mar 2017 15:05:51 +0000 (UTC) Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> I received the same email. ?Be careful out there! Ron MitchellSouth East Michigan Austin Healey Clubwww.semahc.com From: I Erbs To: Ahealey help Sent: Wednesday, March 29, 2017 10:58 AM Subject: [Healeys] Fwd: Terrible Misfortune Scam warning Mr. Ira Erbs Portland, OR excuse typos and strange words my phone wants you to see---------- Forwarded message ---------- From: "Marion S. Brantley, Jr." Date: Mar 29, 2017 6:01 AM Subject: Terrible Misfortune To: Cc: Good Morning, ????? I'm writing this with tears in my eyes, my family and i came down here to Marseille on a short trip.Unfortunately we were mugged at the park of the hotel where we stayed all cash,credit card and mobile phone were stolen off us but luckily we still have our passports with us. ??????? I made contact with my bank but it would take me 5 working days to access funds in my account,the bad news is our flight will be leaving in less than 8-hrs from now but we're having problems settling the hotel bills and the hotel manager won't let us leave until we settle the bills. I'll need your help financially and i promise to make the refund once we get back home,Please let me know if i can count on you and i need you to keep checking your email because it's the only way i can reach you.?I anticipate your response ?? Marion S. Brantley, Jr. Tampa Bay Austin-Healey Club Membership Chmn. & Delegate_______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Wed Mar 29 10:54:42 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 29 Mar 2017 12:54:42 -0400 Subject: [Healeys] Fwd: Terrible Misfortune References: <58dbb03c.4644370a.900ec.0b32SMTPIN_ADDED_MISSING@mx.google.com> Dear Marion, I'm a little short of funds right now, but if you look up my friend Alain Charnier in Marseille, he's in a tight spot right now and may be able to help. He needs some welding done on the rocker panels of his Lincoln Continental Mk III for which he'll gladly pay handsomely and a guy with your skills should be able to do the job. Oh, a couple of things. Don't ask any questions and look out for a guy named "Popeye" when you get back. Rick On Wed, Mar 29, 2017 at 10:24 AM, I Erbs wrote: > Scam warning > > Mr. Ira Erbs > Portland, OR > excuse typos and strange words my phone wants you to see > ---------- Forwarded message ---------- > From: "Marion S. Brantley, Jr." > Date: Mar 29, 2017 6:01 AM > Subject: Terrible Misfortune > To: > Cc: > > Good Morning, > I'm writing this with tears in my eyes, my family and i came down > here to Marseille on a short trip.Unfortunately we were mugged at the park > of the hotel where we stayed all cash,credit card and mobile phone were > stolen off us but luckily we still have our passports with us. > I made contact with my bank but it would take me 5 working days to > access funds in my account,the bad news is our flight will be leaving in > less than 8-hrs from now but we're having problems settling the hotel bills > and the hotel manager won't let us leave until we settle the bills. > I'll need your help financially and i promise to make the refund once we > get back home,Please let me know if i can count on you and i need you to > keep checking your email because it's the only way i can reach you. > > I anticipate your response > Marion S. Brantley, Jr. > Tampa Bay Austin-Healey Club > Membership Chmn. & Delegate > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dwflagg at juno.com Wed Mar 29 15:00:33 2017 From: dwflagg at juno.com (dwflagg at juno.com) Date: Wed, 29 Mar 2017 21:00:33 GMT Subject: [Healeys] Bogus Help Post I received a post, allegedly from Marion Brantley saying he and his family were mugged in France and he needed financial assistance. ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The Observer http://thirdpartyoffers.juno.com/TGL3141/58dc20bfddbed20bf18b6st02duc -------------- next part -------------- An HTML attachment was scrubbed... URL: From rick at ewilkins.com Wed Mar 29 16:04:34 2017 From: rick at ewilkins.com (Rick Wilkins) Date: Wed, 29 Mar 2017 15:04:34 -0700 Subject: [Healeys] Time for Wilko to sell... References: <20170329083902.RY9TH.6808.root@pamxwww02-z01> Well guys, It?s been a long time, and now I?ve got to let my Healey hobby go. I?ve been on this list since the 90s and with life getting in the way I just haven?t been able to do my car justice. What I have is a 1958 BN6 and a whole lot of extras. Car was restored the late 70s and some bits done since then. Front was hit and slight damage to headlight assembly (have new bucket and rings) Car and some extras seen here: http://ewilkins .com/wilko/ Currently has stock engine (not running). New Zealand Minilites (bolt on wheels) full set of factory steel wheels and hubcaps bolt on hubs for disk brakes brackets and other bit for disk brake conversion (front) Rear brake conversion brackets for rear. Overdrive transmission (working fine) 3000 engine rebuilt long block .030 over Schneider 2860 cam Bolton lightened flywheel Smitty kit on Toyota transmission w/prop shaft tri carb manifold 1 3/4 Two different triple Weber manifolds three weber DCOE 40 carbs with rebuild kits tri carb exhaust manifold dual carb exhaust manifolds Putzke Bilstein kit New wiring harness in box rally bumperettes 7? Lucas flamethrowers Hardtop w/new perspex and rubber ready to rebuild tons of other extras Not sure how much to ask, but some reasonable offer will work.Thanks for looking, and helping find a good home. Rick Wilkins Wilko -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: frntquarter.jpeg Type: image/jpeg Size: 209055 bytes Desc: not available URL: From jarowe at westnet.com.au Wed Mar 29 17:29:52 2017 From: jarowe at westnet.com.au (John Rowe) Date: Thu, 30 Mar 2017 07:29:52 +0800 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> Hi All Would anyone be able to recognise the car and or the track where this photo was taken. Somewhere in NE USA I think. I need this info to placate FIA re my Lotus 18. Any info or ideas welcome Cheers from West OZ John Rowe -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: in period.jpg Type: image/jpeg Size: 27232 bytes Desc: not available URL: From eyera3000 at gmail.com Wed Mar 29 17:56:57 2017 From: eyera3000 at gmail.com (i erbs) Date: Wed, 29 Mar 2017 16:56:57 -0700 Subject: [Healeys] Bogus Help Post References: <20170329.170033.1608.0@webmail03.dca.untd.com> Scam Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR On Mar 29, 2017 2:45 PM, "dwflagg at juno.com" wrote: > I received a post, allegedly from Marion Brantley saying he and his family > were mugged in France and he needed financial assistance. > > > ____________________________________________________________ > *Police Urge Americans to Carry This With Them at All Times* > The Observer > > http://thirdpartyoffers.juno.com/TGL3142/58dc20bfddbed20bf18b6st02duc > [image: SponsoredBy Content.Ad] > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From leavcast at gmail.com Wed Mar 29 18:48:14 2017 From: leavcast at gmail.com (George Castleberry) Date: Wed, 29 Mar 2017 17:48:14 -0700 Subject: [Healeys] Rotisseries. References: <7ED1E653-3560-440F-A75D-10120081563D@comcast.net> I don?t know how much it weighs but I used my engine hoist to get it on. Maybe someday I can use the hoist to get it off? George From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Tuesday, March 28, 2017 2:05 PM To: David Masucci Cc: Ahealey help Subject: Re: [Healeys] Rotisseries. This may seem like a silly question... How much does a bare frame weigh and how do you get it on and off the stands? It has to weigh more after attaching suspension and other bits. Very clever solution Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Tue, Mar 28, 2017 at 8:40 AM, David Masucci wrote: I used two Harbor Freight engine stands and some home made adapters. Worked surprisingly well. Now one of those stands is supporting my engine rebuild. Sent from my iPhone > On Mar 28, 2017, at 9:48 AM, wrote: > > Gentlemen, > > Do any of you have information on vehicle rotisseries? I am considering > getting one, or building one, that will help me on my restoration of my > 1961 BT7. > > Thanks in advance for any information, > > Bob P. > Bellflower, CA. > > ____________________________________________________________ > This Herb Stops Balding Immediately And Restarts Hair Growth > Regrow Hair Protocol > http://thirdpartyoffers.juno.com/TGL3141/58da69e6ebea069e64cf5st01vuc > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/drmasucci at comcast.net > _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeyrik at gmail.com Wed Mar 29 18:59:05 2017 From: healeyrik at gmail.com (HealeyRick) Date: Wed, 29 Mar 2017 20:59:05 -0400 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, Here's a listing of some of the Lotus18 entries in the US: http://www.racingsportscars.com/type/Lotus/18.html If you go to the section listed "full archives" there is more info. I couldn't find any listing of a car wearing "11" but if you had a driver's name or chassis number, you might get some more info. Best, Rick Neville On Wed, Mar 29, 2017 at 7:29 PM, John Rowe wrote: > > Hi All > > Would anyone be able to recognise the car and or the track where this > photo was taken. Somewhere in NE USA I think. > > I need this info to placate FIA re my Lotus 18. > > Any info or ideas welcome > > Cheers from West OZ > > John Rowe > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From healeybruce at roadrunner.com Wed Mar 29 19:53:31 2017 From: healeybruce at roadrunner.com (Bruce Steele) Date: Wed, 29 Mar 2017 18:53:31 -0700 Subject: [Healeys] Bogus Help Post References: <20170329.170033.1608.0@webmail03.dca.untd.com> Hmmm, with what I?m into the engine and transmission with this rebuild, maybe I should start a Go Fund Me campaign. Middle-age guy nearing retirement needs $$$ to for his Healey motor! Bruce Steele Brea, CA 1960 BN7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Wednesday, March 29, 2017 4:57 PM To: dwflagg Cc: Ahealey help Subject: Re: [Healeys] Bogus Help Post Scam Ira Erbs 1959 100-6 MKI engine and disc brakes excuse typos and strange words my phone wants you to see. Portland,OR I received a post, allegedly from Marion Brantley saying he and his family were mugged in France and he needed financial assistance. ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The Observer http://thirdpartyoffers.juno.com/TGL3142/58dc20bfddbed20bf18b6st02duc _______________________________________________ Archive: http://www.team.net/archive http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: From pdzwig at summaventures.com Thu Mar 30 03:15:28 2017 From: pdzwig at summaventures.com (Peter Dzwig) Date: Thu, 30 Mar 2017 10:15:28 +0100 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, are you sure that that is an FJ car and not F1? If the circuit is in the NE I was wondering whether the circuit was Mosport, the curve looks a bit like Moss. Ok it's not the US but it sort of looks like it. What was the source of the photo? Peter Dzwig On 30/03/2017 00:29, John Rowe wrote: > > Hi All > > Would anyone be able to recognise the car and or the track where this photo was > taken. Somewhere in NE USA I think. > > I need this info to placate FIA re my Lotus 18. > > Any info or ideas welcome > > Cheers from West OZ > > John Rowe > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/pdzwig at summaventures.com > -- =========================================================== Dr Peter Dzwig From linwoodrose at mac.com Thu Mar 30 07:24:18 2017 From: linwoodrose at mac.com (Linwood Rose) Date: Thu, 30 Mar 2017 09:24:18 -0400 Subject: [Healeys] Time for Wilko to sell... References: <20170329083902.RY9TH.6808.root@pamxwww02-z01> <54F4E640-67C3-42E5-BD04-5CA49B1EAD6B@ewilkins.com> Hello Rick, Time does march on. When I began the research in preparation for the restoration of my 1960 BT7 around 1999-2000, the work on your car was one of my resources! Sorry to see you moving on, but best wishes and thanks for the help!! Lin > On Mar 29, 2017, at 6:04 PM, Rick Wilkins wrote: > > Well guys, It?s been a long time, and now I?ve got to let my Healey hobby go. I?ve been on this list since the 90s and with life getting in the way I just haven?t been able to do my car justice. > > What I have is a 1958 BN6 and a whole lot of extras. Car was restored the late 70s and some bits done since then. Front was hit and slight damage to headlight assembly (have new bucket and rings) > > Car and some extras seen here: http://ewilkins.com/wilko/ > > Currently has stock engine (not running). > New Zealand Minilites (bolt on wheels) > full set of factory steel wheels and hubcaps > bolt on hubs for disk brakes > brackets and other bit for disk brake conversion (front) > Rear brake conversion brackets for rear. > Overdrive transmission (working fine) > 3000 engine rebuilt long block .030 over > Schneider 2860 cam > Bolton lightened flywheel > Smitty kit on Toyota transmission w/prop shaft > tri carb manifold 1 3/4 > Two different triple Weber manifolds > three weber DCOE 40 carbs with rebuild kits > tri carb exhaust manifold > dual carb exhaust manifolds > Putzke Bilstein kit > New wiring harness in box > rally bumperettes > 7? Lucas flamethrowers > Hardtop w/new perspex and rubber ready to rebuild > tons of other extras > > Not sure how much to ask, but some reasonable offer will work.Thanks for looking, and helping find a good home. > > Rick Wilkins > Wilko > > > > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/linwoodrose at mac.com > From eyera3000 at gmail.com Thu Mar 30 10:02:10 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 09:02:10 -0700 Subject: [Healeys] cost in today's $ was curious how much healey cost in today's money [image: Inline image 1] Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From healeyrik at gmail.com Thu Mar 30 12:07:25 2017 From: healeyrik at gmail.com (HealeyRick) Date: Thu, 30 Mar 2017 14:07:25 -0400 Subject: [Healeys] cost in today's $ References: Interesting, although I'd say a similar car today would actually sell for around $45k. I did the same comparison with the bugeye's price of $1795 and in today's money it would be $15k. I don't know what car you could buy for that today and would guess a modern day bugeye would be around $23k-$25k. This just probably shows that the cost of cars as a percentage of income has increased and we pay more up front for increased safety, mileage, lower emissions and increased longevity. Rick Neville On Thu, Mar 30, 2017 at 12:02 PM, i erbs wrote: > was curious how much healey cost in today's money > [image: Inline image 1] > Ira Erbs > Portland,OR > _______ _______ > (______ \____1959 BN4____/ _______) > (_________________________) > BT7 engine and disk brakes > > A racing car is an animal with a thousand adjustments. Mario Andretti > Please excuse random auto corrects and misspelled words > > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/healeyrik at gmail.com > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From eyera3000 at gmail.com Thu Mar 30 12:36:46 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 11:36:46 -0700 Subject: [Healeys] cost in today's $ References: Seeing as the Healey was about the price of Vette, I guess anew Healey would cost in $80K plus range today. I paid $500.00 in 1975 for my car $2260.00 in today's money. I worked a lot of hours to pay for that car. Of course I have put around $30K into it restoring it over the last 42 years Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Thu, Mar 30, 2017 at 11:07 AM, HealeyRick wrote: > Interesting, although I'd say a similar car today would actually sell for > around $45k. I did the same comparison with the bugeye's price of $1795 > and in today's money it would be $15k. I don't know what car you could buy > for that today and would guess a modern day bugeye would be around > $23k-$25k. This just probably shows that the cost of cars as a percentage > of income has increased and we pay more up front for increased safety, > mileage, lower emissions and increased longevity. > > Rick Neville > > On Thu, Mar 30, 2017 at 12:02 PM, i erbs wrote: > >> was curious how much healey cost in today's money >> [image: Inline image 1] >> Ira Erbs >> Portland,OR >> _______ _______ >> (______ \____1959 BN4____/ _______) >> (_________________________) >> BT7 engine and disk brakes >> >> A racing car is an animal with a thousand adjustments. Mario Andretti >> Please excuse random auto corrects and misspelled words >> >> _______________________________________________ >> Support Team.Net http://www.team.net/donate.html >> Suggested annual donation $12.75 >> Archive: http://www.team.net/archive >> Forums: http://www.team.net/forums >> >> Healeys at autox.team.net >> http://autox.team.net/mailman/listinfo/healeys >> >> Unsubscribe/Manage: http://autox.team.net/mailman/ >> options/healeys/healeyrik at gmail.com >> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 51735 bytes Desc: not available URL: From ardmorebusiness at xtra.co.nz Thu Mar 30 14:55:48 2017 From: ardmorebusiness at xtra.co.nz (Mark Donaldson) Date: Fri, 31 Mar 2017 09:55:48 +1300 Subject: [Healeys] Fwd: Not Healey related but Formula Junior history References: <941f1e33-fa61-0bd5-75e1-74efed8cdc85@gmail.com> <999ef5d7-1432-b755-85eb-f6c11dbba311@westnet.com.au> John, What is your car serial number? Mark Ardmore, NZ _____ From: John Rowe [mailto:jarowe at westnet.com.au] Sent: Thursday, 30 March 2017 12:30 p.m. To: healey List Subject: [Healeys] Fwd: Not Healey related but Formula Junior history Hi All Would anyone be able to recognise the car and or the track where this photo was taken. Somewhere in NE USA I think. I need this info to placate FIA re my Lotus 18. Any info or ideas welcome Cheers from West OZ John Rowe -------------- next part -------------- An HTML attachment was scrubbed... URL: From eyera3000 at gmail.com Thu Mar 30 15:05:53 2017 From: eyera3000 at gmail.com (i erbs) Date: Thu, 30 Mar 2017 14:05:53 -0700 Subject: [Healeys] 1/4 scale Novi v8 https://macsmotorcitygarage.com/video-quarter-scale-novi-v8-by-ron-colonna-hear-it-sing/ Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: From jmsdarch at sbcglobal.net Thu Mar 30 20:36:37 2017 From: jmsdarch at sbcglobal.net (John Spaur) Date: Thu, 30 Mar 2017 19:36:37 -0700 Subject: [Healeys] cost in today's $ References: In 1968 I paid $800 dollars for a 1962 tricarb. After painting a couple of times, rebuilding the engine and redoing the interior (in vinyl) I sold it in 1973 for $3,000. It also had a hard top. John Spaur From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs Sent: Thursday, March 30, 2017 9:02 AM To: Ahealey help Subject: [Healeys] cost in today's $ was curious how much healey cost in today's money Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 51673 bytes Desc: not available URL: From rchaskell at earthlink.net Fri Mar 31 17:50:06 2017 From: rchaskell at earthlink.net (Bob Haskell) Date: Fri, 31 Mar 2017 19:50:06 -0400 Subject: [Healeys] For your fireplace mantel Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php From eyera3000 at gmail.com Fri Mar 31 18:41:41 2017 From: eyera3000 at gmail.com (i erbs) Date: Fri, 31 Mar 2017 17:41:41 -0700 Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> nice of then to throw in free shipping if you came up with the $10K to buy it Ira Erbs Portland,OR _______ _______ (______ \____1959 BN4____/ _______) (_________________________) BT7 engine and disk brakes A racing car is an animal with a thousand adjustments. Mario Andretti Please excuse random auto corrects and misspelled words On Fri, Mar 31, 2017 at 4:50 PM, Bob Haskell wrote: > Anyone know the history of this? > > http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROF > EO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash= > item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr > > > Cheers, > > Bob Haskell > AHCA 3000 MkI registrar > http://www.ciahc.org/registry_3000mk1.php > _______________________________________________ > Support Team.Net http://www.team.net/donate.html > Suggested annual donation $12.75 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > > Healeys at autox.team.net > http://autox.team.net/mailman/listinfo/healeys > > Unsubscribe/Manage: http://autox.team.net/mailman/ > options/healeys/eyera3000 at gmail.com > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jstmorris at yahoo.com Fri Mar 31 19:03:17 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 1 Apr 2017 01:03:17 +0000 (UTC) Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> Hi Bob;? Attached is a little bit of research I did last month.? It may help a little. ?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 31, 2017 8:15 PM, Bob Haskell wrote: Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia Coppa Delle Trophy-D.M.Healey [eBay 17-02-28].doc Type: application/msword Size: 565248 bytes Desc: not available URL: From jstmorris at yahoo.com Fri Mar 31 19:06:10 2017 From: jstmorris at yahoo.com (J. Scott Morris) Date: Sat, 1 Apr 2017 01:06:10 +0000 (UTC) Subject: [Healeys] For your fireplace mantel References: <58DEEB2E.4030600@earthlink.net> And here are a couple of other files.?--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives On Friday, March 31, 2017 8:15 PM, Bob Haskell wrote: Anyone know the history of this? http://www.ebay.com/itm/COPPA-DELLE-MILLE-MIGLIA-TROPHY-TROFEO-FRANCO-MAZZOTTI-D-M-HEALEY-1951-/152456127845?hash=item237f17e565:g:69oAAOSwCU1YqPy3&vxp=mtr Cheers, Bob Haskell AHCA 3000 MkI registrar http://www.ciahc.org/registry_3000mk1.php _______________________________________________ Archive: http://www.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia [Safety Fast 1962-12].doc Type: application/msword Size: 3602432 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1951 Mille Miglia-Photos-Revs Inst.doc Type: application/msword Size: 294400 bytes Desc: not available URL: