Re: Help! GT6 Rotoflex (fwd)

[Fiasco Brothers Garage <KC3565L@sprintmail.com>]

>Help! I'm trying to change out the roto-flex's and don't quite
>understand the process. I've taken the diff and the intermediate drive
>shafts out. I've also removed the brake drum and the center nut, and
>this is where I'm stumped. It seems to me that I can use a pulley
>puller attached to the rear hub and pressing on the outer shaft to
>press the drive shaft thru the verticle link, but nothing is budging.
>Am I missing someting?

Take it to a machine shop with a big hydraulic press and go
next door for a donut while they press it apart.  BTDT.
Dave