That's it.
It will interfere with the left front corner of the passenger footwell.
You can take a hammer and bash that area to get a little clearance,
doesn't take much. That's also a double wall, so what you do in the
engine compartment won't show up inside the car.
You can use your external solenoid, you just need to run a wire from the
battery connection to the solenoid connection on the outside of the
starter.
Are you racing with this? If so, you'll also need to do something about
the solid internal wires. They will, I mean WILL break after a few
races. Some people put some silicone around them to dampen the
vibrations. I think others wire in some braided wire. I run a bracket
from the generator mount to the back of the starter.
Good luck!
David Littlefield
On Sun, 21 Nov 2010 16:06:11 -0800 David Franks <franks97@frontier.com>
writes:
> The Starter in my 67 Sprite finally died. Can someone tell me if this
> is the
> Isuzu starter that is supposed to work as a replacement?
>
> <http://tinyurl.com/2afnjvp>
>
> Ultima - Starter
> Part Number: 17155
> Line: ULT
>
> Does this unit fit without modification? Can I use it with my
> externally
> mounted solenoid?
>
> Thanks!
>
>
> --
> David Franks
> franks97@frontier.com
> 67 AH Sprite #82 Blue
> www.youtube.franks97
> _______________________________________________
> Vintage-race@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/vintage-race/dmeadow@juno.com
>
>
____________________________________________________________
Globe Life Insurance
$1* Buys $50,000 Life Insurance. Adults or Children. No Medical Exam.
http://thirdpartyoffers.juno.com/TGL3141/4ce9de91bf4d173e3bm04vuc
_______________________________________________
Vintage-race@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|