For some reason this was sent to me rather than vintage-race@autox.team.net.
Reply to author, not me.
mjb.
----
------- Start of forwarded message -------
From: LenPicton@aol.com
Date: Sun, 7 Apr 2002 12:19:36 EDT
Subject: alternators and cut-offs (again)
Thanks to information I acquired on this list, I traded my simple, but
useless 2 pole cut off switch for one with an alternator kill circuit. The
diagram shows a 3 ohm, 11 watt resistor between the switch and ground. The
resistor itself is a delicate loking ceramic thingee with 2 tiny wires coming
out of one end.
Where/how does one physically mount such a delicate thing so that it doesn't
get damaged or break one of the little wires?
Len
------- End of forwarded message -------
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/vintage-race
|