vintage-race
[Top] [All Lists]

Re: Filters for velocity stacks

To: <vintage-race@autox.team.net>
Subject: Re: Filters for velocity stacks
From: "Elton Clark" <lotus.tony@airmail.net>
Date: Mon, 22 May 2000 16:39:01 -0500
Motorcycle shops were once the main source . . .The brand name was "Filtron"
and the last "Pegasus" catalog I saw still listed the "sock type" . . 1 800
688 6946.


Tony_______________________@Sherman.Texas



> A friend runs vel. stacks on twin SU's.
> He has round cylindrical "slip on" foam
> filters about 4 in. OD and approx. 6 in.
> in length. They are very low restriction
> but do manage to keep sand, stones, etc.
> out of the internals.
>
> It is of "one piece" construction, versus
> several pieces glued together. The filter
> shape is reinforced by large internal coil
> springs which capture the lip of the stack
> and holds the filter in position.
>
> They were on an ex-SCCA Sprite from Texas,
> I believe, and over time the source info
> has been lost.
>
> Does anyone know if something like this is
> still available somewhere?
>
> Thanks,
> Greg
> VSCDA #517 Sprite
> Cedarburg, WI
>
>


<Prev in Thread] Current Thread [Next in Thread>