vintage-race
[Top] [All Lists]

Drop axles for Corvette & Information on XK120s

To: vintage-race@autox.team.net
Subject: Drop axles for Corvette & Information on XK120s
From: TR3197@aol.com
Date: Tue, 16 Nov 1999 14:27:25 EST
Drop Axles:  Does anyone know if drop axles are available for the Corvette 
chassis? A friend is using Corvette chassis on a Cobra kit car and wants to 
lower the nose. He sees nothing available in any of the aftermarket catalogs.

XK120 (2) and  Jaguar Parts: Same gentleman has two restorable XK120s in his 
barn that reportably show less than 50K. There are very few people that know 
about these cars. He is retired, living on a farm, and not e-mail enabled. He 
IS interested in selling and I mentioned that I would put some feelers out.

He is going to keep his XK140 as it has a bit more legroom for him. Too tall 
to drive the XK120s.

Cars are located near Cedar Falls, Iowa.  I am going to go look at his new 
project the and Jaguars and a cache of parts in the next couple of weeks. It 
has been a few years since I walked through his barns of cars and parts, so I 
need to refresh my image of this stuff. Please contact me privately if you 
have any interest. I will be on the road for a week and largely offline. 
Also, I can be found in the paddock area at VARA's LV event Fri-Sat-Sun, if 
you are interested and want to talk. I'll be hanging out with the elite group 
of Triumph folks.

Joe Alexander
Cedar Falls, Iowa

<Prev in Thread] Current Thread [Next in Thread>
  • Drop axles for Corvette & Information on XK120s, TR3197 <=