Install a thinner washer. Generally fixes that symptom. DP
On September 4, 2023, at 6:37 PM, Anthony Rhodes <spamiam@comcast.net> wrote:
I am hoping that the top was drilled properly. But it makes me wonder when it
can be made to go in and out of OD by pressing the shifter slightly forward and
backward all while in 3rd gear.
It almost strikes be as if the drill hole is a little too far forwardâ?¦..????
Could that actually be the case? I have no idea because I donâ??t know the
precise shape and positioning of whatever it is on the selector that triggers
the switch.
-Tony
>
> On Sep 4, 2023, at 3:34 PM, EDWARD WOODS <fogbro1@comcast.net> wrote:
>
> P.S. Iâ??m assuming that the top cover was properly milled, drilled and
> tapped for the switches
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|