triumphs
[Top] [All Lists]

Re: [TR] TR3A QUESTION

To: "'Jim Henningsen'" <trguy75@gmail.com>, "'Alex & Janet Thomson'" <aljlthomson@charter.net>, "'TR3 Triumphs'" <triumphs@autox.team.net>
Subject: Re: [TR] TR3A QUESTION
From: "Notakitcar" <notakitcar@yahoo.com>
Date: Sat, 24 Apr 2021 18:07:19 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <F3A773EA-E728-445B-8690-138515D33F1F@gmail.com> <000c01d7394f$9e510b30$daf32190$@charter.net> <014301d7395c$49ed9380$ddc8ba80$@gmail.com>
Thread-index: AQHaJwczYrjx5fAIY9TGUxisgNGAZwIIRjjTAoWcsn2qmf+EcA==
If it is part number 500620, TRF has them at the modest price of $99.95ea.
Bill

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Jim
Henningsen
Sent: Saturday, April 24, 2021 5:51 PM
To: 'Alex & Janet Thomson' <aljlthomson@charter.net>; 'TR3 Triumphs'
<triumphs@autox.team.net>
Subject: Re: [TR] TR3A QUESTION

Alex, the is the large brass drain plug under the OD if you were thinking of
the small square one under the main tranny.  It has a hex head on it.  I
think it is 1 1/16 inch size.  It is different than the brass drain plug on
my TR4 a type.  For that one Moss has a special wrench tool which works
great.  I may need to get a wrench for the 3 plug as that might work better
than a socket.  
Jim

-----Original Message-----
From: Alex & Janet Thomson <aljlthomson@charter.net>
Sent: Saturday, April 24, 2021 5:20 PM
To: 'Jim Henningsen' <trguy75@gmail.com>; 'TR3 Triumphs'
<triumphs@autox.team.net>
Subject: RE: [TR] TR3A QUESTION

For the drain plug, go to a good NAPA store. I have changed some of my
tractors over to hex head pipe plugs since the square heads can round off so
easily. Of course, those machines date back to the 50's and before. They
should have them in brass, as well. They also have a good listing for
straight thread, flanged plugs, as well. Is that overdrive drain plug an
oddball thread?

Sorry - can't help with question #2.

Alex Thomson

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Jim
Henningsen
Sent: Saturday, April 24, 2021 5:07 PM
To: TR3 Triumphs
Subject: [TR] TR3A QUESTION

Are there any replacements for the brass overdrive drain plug on 61 3a?
Mine is worn a little making it difficult to tighten and loosen with socket.
What tricks are there to stop leaks out of this plug? 

Question 2.  Anyone have a good used Tr3a hood latch.  My neighbors has the
lever arm broken off making it difficult to unlatch.  Attaches to the hood.


Many thanks,
Jim Henningsen
Ocala fl

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

http://autox.team.net/mailman/options/triumphs/aljlthomson@charter.net


** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>