Thanks, Jerry. Is the disassembly of the cover very involved? It looks like at
least one of the shift rods needs to be removed prior to drilling.
Dean
Sent from my iPad
> On Apr 20, 2020, at 4:54 PM, Jerry Van Vlack <jerryvv@roadrunner.com> wrote:
>
> It's pretty easy, drill and tap the top cover on the boss where the
> reverse light switch would go and buy an OD isolator switch. The shift fork
> is already cast to turn the switch on and off.
>
> I think the instructions are in the Factory service manual. Need the correct
> tap and drill. I believe the tap is metric. If you need more info write to me
> and I'll try to drill it down further.
>
> I've done it.
>
> JVV
>
>
> -----Original Message----- : Dean Mericas
> Sent: Monday, April 20, 2020 5:45 PM
> To: triumphs@autox.team.net
> Subject: [TR] Retrofitting a reverse light switch on a TR4
>
> Iâ??ve got the transmission on the floor of my shop, and am wondering if I
> should take this opportunity to install a reverse lamp switch. How big a deal
> is the retrofit?
>
> Thanks.
>
> Dean
> 1965 TR4
> 1974 Alfa Romeo 2000 GTV
> 1976 Alfa Romeo Giulia Nuova Super 2L
> Austin, TX
> Sent from my iPad
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|