triumphs
[Top] [All Lists]

[Fot] Beaten by equipment...Pacific NW edition.

Subject: [Fot] Beaten by equipment...Pacific NW edition.
From: agb at compsnw.com (Alec Buchan)
Date: Tue, 5 Jun 2018 17:47:41 -0700
References: <CAO0FjVana4Y-zqt-ffy419UcNOhcKt9M1GS=ij4ckWghhNTcVg@mail.gmail.com> <163c73c8063-c76-2806@webjas-vae111.srv.aolmail.net> <36604172.8577270.1528120557084@mail.yahoo.com>
I've got an issue...lots of issues, but this refers to my TR4.

Raced in my first event of the year this past weekend at the Spokane 
Festival of Speed (SOVREN)

Car did well but in my third session, going down the back straight, over 
a couple bumps, my throttle went wide open 'on its own'. Once back in 
the paddock, we found that both front engine mounts had failed and the 
engine dropped below the mount on the carburetor side, forcing the 
throttle to its maximum position.

These were brand new mounts as one failed at our Fall Finale, last 
September in Seattle. Also, these two events are the only events I have 
run my 'spare' motor which I picked up in CA last year. Engine seems to 
do well but the combination of its torque, combined with the quality of 
the mounts, is very frustrating. I tried to take a photo of how it 
currently sits, but couldn't focus well enough. I am running the round 
mounts,? "Engine Mount Uprated TR4 TR4A (SKU 130985)" from a PNW 
supplier. Three mounts in two events is not a good pattern.

Any thoughts or alternatives is greatly appreciated.

Alec Buchan
aka the Blue Caboose.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: ReducedMartinPhoto.jpg
Type: image/jpeg
Size: 389022 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180605/9c7c478a/attachment.jpg>

<Prev in Thread] Current Thread [Next in Thread>