triumphs
[Top] [All Lists]

[Fot] Wilwood 570 brake fluid

Subject: [Fot] Wilwood 570 brake fluid
From: duncan.charlton54 at gmail.com (Duncan Charlton)
Date: Mon, 26 Feb 2018 11:19:40 -0600
References: <CAO0FjVZmJ0Rx1zR4Uxo=YgYSbQoEB8T2H9kHkZ68i0sQG2G61g@mail.gmail.com>
You might see if you can find DOT 5.1.  It?s a non-silicone fluid that?s 
compatible with DOT 3 and DOT 4 and has a higher boiling point.

The Ford racing teams a few decades ago were seen using DOT 3 fluid when other 
teams were using DOT 4 fluids.  Turns out the Ford-label DOT 3 fluid required a 
DOT 3 designation because of its lower wet boiling point ? but the dry boiling 
point was higher than most DOT 4 fluids of the day.  Since they expected to 
replace the fluid after every race, the wet boiling point didn?t matter.

How often are you replacing the Valvoline DOT 3/4 fluid?  If it?s been too long 
it will be ?wet?, having absorbed atmospheric moisture, and this will cause it 
to boil at a significantly lower temperature.

Duncan

> On Feb 26, 2018, at 7:49 AM, Mike Harmuth via Fot <fot at autox.team.net> 
> wrote:
> 
> I just replaced my brake master cylinder (Girling) and the braided lines 
> attached to it. I've been using Valvoline DOT 3/4 fluid and it's worked out 
> OK but at one track (Thompson), I'm always over heating the fluid. I used to 
> use Wilwood 570 in my F440 car and thought I'd give it a try in the Spitfire 
> since it has a higher boiling point than the Valvoline. 
> 
> My concern, probably from leaking seals in the past, was the difference 
> between US Spec DOT 3 (Wilwood) and English DOT 3 fluids. The DOT 4 seems to 
> be compatible, but at with lower boiling temperature than the specialty fluid.
> 
> Has any one used the Wilwood with Triumph OEM grade brake parts? 
> 
> thanks
> mike
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/duncan.charlton54 at gmail.com
> 
> 


<Prev in Thread] Current Thread [Next in Thread>