triumphs
[Top] [All Lists]

[Fot] Oil line & cooler flush

Subject: [Fot] Oil line & cooler flush
From: fubog1 at aol.com (fubog1)
Date: Wed, 3 Jan 2018 07:04:25 -0500
References: <2AA6784F-B0A1-482E-BE5E-54E9418B6984@aol.com>
I have a specific test procedure that I use on oil coolers, prior to attempted 
cleaning.
It involves the use of a nasty-ass chipping-hammer, the pointy end...
Oil coolers are cheap, racing engines aren't.
Glen


 

 

 

-----Original Message-----
From: John Frymark via Fot <fot at autox.team.net>
To: toodamnfunky <toodamnfunky at comcast.net>
Cc: fot <fot at autox.team.net>
Sent: Wed, Jan 3, 2018 2:27 am
Subject: [Fot] Oil line & cooler flush

I was in the industrial cleaning industry for a while and the only effective 
oil cooler cleaning I knew of was done by immersion in an ultrasonic tank with 
a pressured flow through the cooler. The ultrasonic action dislodged 
particulates which were extracted by the fluid flow through the cooler. This 
used aqueous cleaning solution (solvents do not work with ultrasonics) heated 
to 180*F and with a mild alkaline degreasing agent. It is cost justified in 
fleet maintenance settings, but buying a replacement oil cooler is probably 
less expensive for us racers.

John Frymark

Sent from my iPad
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive



-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180103/c163282e/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>