triumphs
[Top] [All Lists]

Re: [TR] Tr6 rims on a tr3a

To: "'David Templeton'" <davidt@opentext.com>, <triumphs@autox.team.net>
Subject: Re: [TR] Tr6 rims on a tr3a
From: "Randall" <TR3driver@ca.rr.com>
Date: Sat, 22 Oct 2016 10:56:31 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <BB85810C03ABE146834E31BD2120C86EF2A4D165@otwlxg20.opentext.net>
Thread-index: AdIseNXcJcExMh4VSbuwJexAhqGzAwAE6Qww
> A local big box is having a tire sale and I going to see about new rubber
> for the tr6 rims. My question what have others experienced to be the good
> size to fit those on a tr3a?

I run 205/55-15 on TR6 rims.  They just barely fit even after some gentle
massaging of the rear fenders.  On my previous TR3A, I had to actually move
the body on the frame a bit, to equalize the clearance.  (Probably had been
tweaked in an accident before I got the car.)  Even so, the tires rubbed the
fenders just a little bit in hard turns.  Enough to visibly polish up the
contact area, but not do any damage.

But there was variation from car to car even when these cars were new, and
almost 60 years of being knocked around is not likely to have helped that.
So your mileage may definitely vary.

BTW, the same tires would not clear when mounted on some old 5.5" "mag"
wheels.

-- Randall
 



** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>