My hotrod buddies turn a regular thermostat into a $30 "performance"
thermostat by drilling a 1/8-inch hole in the flange of the
thermostat. Having seen an actual in-the-package $30 "performance"
thermostat, I can confirm this. I cannot confirm if it makes a damn
bit of difference.
On 4/10/16, Jeff Scarbrough <fishplate@gmail.com> wrote:
> If the water is too cool, the thermostat should close back up, thus
> limiting the effect.
>
> On Sat, Apr 9, 2016 at 8:14 PM, Peter Arakelian <peterara@msn.com> wrote:
>> I have the opportunity to get a high flow thermostat for my TR6. I
>> compared
>> the diameter of the portion that actually opens to a standard thermostat,
>> did some area calculations, and came up with approx. 10 square
>> millimeters
>> larger on the high flow.
>> Question is will it do anything. Two schools of thought have come up.
>> First, yes, it will allow a greater flow of hot coolant into the
>> radiator,
>> much like a high flow water pump would, therefore in hot weather, it will
>> run cooler.
>> Second, no, in fact it may cause overheating or less actual cooling,
>> because
>> the coolant will pass through the radiator too quickly, like having
>> removed
>> a thermostat, and thus not cool enough.
>> Thoughts from the group?
>>
>> Peter Arakelian - '71 TR6, Daily Driver
>>
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
>>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/hoytduff@gmail.com
>
--
Hoyt
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|