triumphs
[Top] [All Lists]

Re: [TR] Removing Tie-rod 56TR3

To: "'Harold Sawatsky'" <hsawatsk@sasktel.net>, "'Randall'" <TR3driver@ca.rr.com>
Subject: Re: [TR] Removing Tie-rod 56TR3
From: "Harold Sawatsky" <hsawatsk@sasktel.net>
Date: Fri, 22 Jan 2016 15:20:32 -0600
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <8F.33.05998.5BD42A65@cdptpa-oedge01> <3B890C81-1F14-4140-BC28-9D34E9DAE938@sasktel.net>
Thread-index: AdFVMlE6zFKbHnEkS/ivRNM86jLwpwAKDr/A
Managed to pick up almost the same thing here in Regina.

Thanks

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Harold
Sawatsky
Sent: Friday, January 22, 2016 10:31 AM
To: Randall
Cc: triumphs@autox.team.net
Subject: Re: [TR] Removing Tie-rod 56TR3

I'll check our local auto parts supplier here. 
Thanks!

Harold Sawatsky
Remax Crown Real Estate
306-535-6961
hsawatsky@remax.com

> On Jan 22, 2016, at 9:41 AM, Randall <TR3driver@ca.rr.com> wrote:
> 
> 
>> First, thanks for all the input I received before Xmas. The project 
>> this weekend is to remove the tie rod as one of the fulcrum pins is 
>> completely destroyed
> 
> A very common problem in my experience.  You might want to consider 
> upgrading to the Delrin/SS joints as sold by ARE & TRF.  They will last
much longer.
> 
>> Also, should we replace any other bushings while we are doing this? 
>> It does look like most other components are in good condition.
> 
> The inner A-arm bushings are another common problem, IMO; particularly 
> the upper ones.  For the other joints, pry and wiggle against them 
> looking for any movement.  In general, if you can see them move at all in
ways they are not supposed to, the joint should be replaced.
> 
> Also look for any play in the steering box.  If you see any, my 
> suggestion is to rebuild it rather than trying to adjust the screw on the
top.  It's to compensate for manufacturing tolerances, not wear IMO.
> 
>> Trying to find some documentation or advice as to the best way to 
>> proceed and do I need any specialty tools.
> 
> This style of tool seems to work the best for me 
> http://www.harborfreight.com/3-4-quarter-inch-forged-ball-joint-separa
> tor-99849.html
> 
> Never had much luck with the "pickle fork" style, especially on those
fulcrum pins (aka silentblocs).
> 
> Randall
> 

** triumphs@autox.team.net **

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/hsawatsk@sasktel.net


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>