Yes, that is what I an planning. I am going to look at a fiberglass option
too.
Sent from mobile Bill
On Jan 9, 2014, at 4:01 PM, Geo Hahn <ahwahneetr@gmail.com> wrote:
Bill --
I don't think you're being understood.
You want to replace the vinyl-cover wood panel with something that can be
power-coated -- right?
Total replacement would need something pretty thick to look right but a
'sandwich' of the original aluminum backing, a thin layer of wood or Masonite,
then a front layer of sheet metal (possibly aluminum again) would give you a
part that could be powder coated.
I don't recollect ever seeing this done, possibly that is why it is hard to
catch your drift.
Geo
> On Thu, Jan 9, 2014 at 10:35 AM, <wbeech@flash.net> wrote:
> Bob,
> Sorry, I wasn't clear. I have the complete original door with the
aluminium
> base and hinge with the very little screws securing the vinyl covered wood
> face. Just want to either replace the face so it can be coated or the
> entire unit.
> Thanks,
> Bill
>
> -----Original Message-----
> From: Bob Labuz [mailto:yellowtr@adelphia.net]
> Sent: Thursday, January 09, 2014 10:55 AM
> To: wbeech@flash.net; triumphs@autox.team.net
> Subject: Re: [TR] Dash Painting/P.Coating
>
> Bill,
>
> The original cubby box door base is aluminium not wood. The previous owner
> must have lost the original. I am not sure if any of the suppliers can get
> you a replacement. Should be not too hard to make a new one. The vinyl
> covered wood may be original but is supposed to attach to the aluminium
base
> with very small counter-sunk wood screws. Just long enough to secure to the
> wood but not penetrate.
>
> The problem I see is the aluminium base is attached to the dash with a long
> chrome plated hinge which is riveted to the base. Not surer how you could
> duplicate this hinge unless your door is currently hinged with the original
> removed from the aluminium base.
>
> Maybe someone has a spare they could sell you.
>
> No experience with PC so others might chime in. I just rattle canned mine
> with rustoleum.
>
> Bob
>
> On 01/09/2014 11:10 AM, wbeech@flash.net wrote:
> > I know I am not the first to think of trying this so I would again
> > implore the List for BTDT wisdom.
> >
> > I am thinking of either painting or powder coating the dash on my
> > current
> > TR3 project, but curious as to what others have done with the cubby
> > box door. So far, my only solution is making an aluminium panel to
> > replace the vinyl covered wood that is currently there.
> >
> > All thoughts and pictures appreciated,
> >
> > Cheers,
> > Bill
> >
> > Bill Beecher
> > '58 TR3A TS/30766L "Tarbaby"
> > '62 TR3B TCF/2549L " Aunt B" (in rehab)
> > <http://www.triumphowners.com/1566> www.triumphowners.com/1566
> > '68 Land Rover Series IIa 88" "The Beast"
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|