Darrell:
Just did mine. Use a sharp exacto knife and cut out rubber knobs. Then I
used a spark plug socket on end of long extension and gently tapped them
further in tube. A little wd40 on new ones and used the same socket to gently
tap until knobs fit in holes.
Jim Henningsen
Ocala FL
62 Tr4. X2 now
75 TR6
Sent from Jim Henningsen
> On Dec 7, 2013, at 3:20 PM, darrell floyd <tr250driver@gmail.com> wrote:
>
> Hey List,
> Has anyone any tips on removing and installing new bushes in the steering
> column? I am about to attempt the procedure. I have no clue how to depress
> the two knobs like the workshop manual suggests to remove the old ones?
> Thanks,
> Darrell
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|