triumphs
[Top] [All Lists]

Re: [TR] Urgent Help Please

To: "Dave1massey@cs.com" <Dave1massey@cs.com>
Subject: Re: [TR] Urgent Help Please
From: "wbeech@flash.net" <wbeech@flash.net>
Date: Fri, 20 Sep 2013 08:18:13 -0500
Cc: "triumphs@autox.team.net" <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=flash.net; b=Wl75GM92sFpRYnvfJs404adhOrBxZeGVlY654XRcxadjnob++3GaP1BoxWPpd+FYjYH4QZUZAjx5tVc+kSAzobEnvhY39dg+7qvrHFMNhHHolmkfdSmHO7250NXP10AX8AGpqK81fQvQFAKY3ZTta6UQXisedudLyvDXoDLu+W8=;
References: <83376.7d4c7c91.3f6d8b18@cs.com>
The destination is the hole in the firewall, source is the scuttle vent.

The hole on the trans cover is for the battery box drain.

Bill

Sent from my iPhone

> On Sep 20, 2013, at 6:27 AM, Dave1massey@cs.com wrote:
>
> Are we talking about the source connection or the destination?  There is a
> hole in the transmission cover that I used for the drain.
>
> Dave
>
> In a message dated 9/19/2013 11:06:10 PM Central Daylight Time,
> wbeech@flash.net writes:
>> On my '58 the tube routes out the firewall through the RHD steering
>> column
>> blanking plate, the rubber seal seems to be made for this purpose.
>>
>> Pictures off line on request.
>>
>> Bill
>>
>> Sent from my iPhone
>>
>>> On Sep 19, 2013, at 3:48 PM, William Pugh <anabil007@comcast.net> wrote:
>>>
>>> We are installing new carpet in the TR3, and we found the Vent Drain
>> Tube.
>>> Not attached to anything, and we can not find a hole to attach it to.
>>>
>>> Any ideas greatly appreciated.   BTW it is Moss Part number 680-835, page
>> 68
>>> of the Moss catalog.  My Red TR2/3 ignores it, only shows battery box
>> drain.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>